Lanzhou LS rotary table ZP275-2 parts list
Rotary table parts name:
| ROTARY TABLE | Drain plug 1″ |
| Lock pawl—left | Seal |
| Lock pawl—right | O ring |
| Pin,handle lock pawl | Screw |
| Grease fitting | Washer,spring 20 |
| Grease fitting | Shim |
| Pin,lock pawl | Shim |
| Plug | Support, bearing |
| Screw, hex soc hd | Screw |
| Grease fitting | Washer, spring 16 |
| Plate, I.D | SIinger |
| Screw | O-Ring |
| Dipstick, oil | Chain wheel |
| Plug | |
| Housing | Sprocket retainer |
| Tongue | Flange |
| Cover | Main kelly bushing installation |
| Ring gear (spiral teeth) | Main kelly bushing |
| Ring gear (bevel ing teeth) | Spacer |
| Bearing | Board |
| Table | Sorew |
| Table installation | Nut |
| Ring gear (sprial teeth) | Washer,spring 28X35X2 |
| Table | Valve DN32 (1 1/4″) |
| Bearing | Joint R11/4 |
| Columnar pin | Kellybushing 20″ |
| Support, bearing | Lift hook |
| O-Ring | Lift hook |
| Screw | Pinion shaft assembly |
| Washer, spring | End-plate of bearing |
| Shim | Bearing |
| Shim | O-Ring |
| Shim | Spacer |
| Lock pawl | Drain plug 1″ |
| Pin | Drain plug 1″ |
| Pin,cotter 5X36 | Magnet |
| Pin,cotter 5X36 | Pin,cotter 2X12 |
| Kelly bushing | Shaft, pinion |
| Kelly bushing | Bearing |
| Kelly bushing instal1 at ion | Screw |
| Kelly bushing | Screw |
| Board | Screw |
| Pin | Washer,spring 20 |
| Master bushing | Washer,spring 20 |
| Bearing | Washer,spring 16 |
| Shim | Shim |
| Shim | Capsule |
| Shim | Seal，oil |
| Pinion shaft assembly | Retainer, pinion end |
| Screw with head holes | Retainer, pinion end |
| Screw with head holes | Nut, pinion shaft |
| Key | Pinion shaft housing |
| Wire | Sprocket retainer |
Rotary table parts no.:
| 105.10.00 | 32630 |
| 105.06.01 | D4-5-73 (420X8.6) |
| 105.06.02 | 105.06.50.12 |
| 105.06.03-1 | 104.05.19 |
| GB1152-89 (M10X1) | 105.06.50.03 |
| 105.06.04-1 | 3630 |
| 105.06.05 (1/8″) | GB5783-86 (M20X60) |
| 105.06.10.00 | GB893-87 |
| GB70-85 (M24X75) | |
| 105.10.03 | 105.06.50.04 |
| GB67-85 (M4X8) | 105.06.50.05-1 |
| 105.06.20.00 | 105.06.50.06 |
| 105.06.07 (1 1/2″) | D7-1-67(180*220*15) |
| 105.06.30.00 | 105.06.50.07 |
| 105.06.08 | |
| 105.06.40.00 | 105.06.50.08 |
| 105.06.33 | 105.06.50.09-1 |
| 105.06.34 | C6-1-72(150) |
| 91682/800 | GB32.1-88 |
| 105.06.10 | 105.06.17 |
| 105.06.22 | 105.06.18 |
| GB93-87 | GB5783-86(M16X40) |
| 105.05.18 | GB93-87 |
| 105.05.19 | 105.06.19 |
| GB91-86 | 105.06.20 |
| 105.06.331(5″) | 105.10.01.00 |
| 105.06.32 | 105.06.24 |
| 1681/800 | 105.06.25 |
| 105.06.13 | 105K.06.21 |
| 105.06.50.00 | 105.06.50.00 |
| 104.05.19 | 105.06.50.12 |
| 105.06.14 | 105.06.50.13 |
| 105.06.15 | 105.06.51.00 |
| 105.06.22(M24*70) | 105.06.16 |
Drawworks JC28KIII easy worn parts list:
| GB/T288-1994 | Bearing |
| GB/T276-1994 | Bearing |
| GB/T13781-1992 | Bearing |
| GB/T13781-1992 | Bearing |
| GB/T13781-1992 | Bearing |
| GB/T3452. 1-1982 | O ring |
| GB/T3452.1-1982 | O ring |
| GB/T281-1994 | Bearing |
| JC28A-02-07 | Braided brake block |
| JC28A-02-08 | Braided brake block |
| GB/T276-64 | Bearing |
| GB/T13781-1992 | Oil seal |
| Mechanical seal |