Lanzhou LS Swivel SL225-3 parts list
| Swivel | 104-18.00 |
| Bail | 104.14.04 |
| Plug | 104.05.02 (2″) |
| Gooseneck | 104.05.33 |
| Stud | GB898-88 (AGM24-M24x65) |
| Nut | GB6170-86 (M24) |
| Washer. spring | |
| Washer. spring | GB93-87 (24) |
| Support. gooseneck | 104.07.01 |
| Packing. assembly | 104.05.30.00 |
| Umbrella | 104.05.07 |
| Bushing (upper) | 104.05.08-1 |
| Seal. oil | |
| Seal. oil | D7-1-67 (220x260x18) |
| Spacer | |
| Spacer | 104.06.16 |
| Snap. r i ng | 104.05.24 |
| Bearing | GB297-84 (2007140) |
| Shim | 104.07.02 |
| Bolt | GB5783-86 (M12x40) |
| Washer. spring | GB93-87 (12) |
| Bumper | 104.05.10.00 |
| Bolt | GB5781-86 (M20x70) |
| Washer.spring | GB93-87 (20) |
| Washer | GB97.1-85 (20) |
| Gear-ring (disc) | 104.07.03 (m=5 z=110) |
| Stem | 104.18.02 |
| Screw | GB67-85 (M4x8) |
| Stud | GB898-88 (AM16x65) |
| Stud | GB898-88 (AM16x100) |
| Nut | GB6170-86 (M16) |
| Pneumatic motor and drive system | 104.07.06.00 |
| Sleeve.hose union | 104.05.32 |
| O-ring | D4-4-66 (120×5.7) |
| Nut.hose union | 104.05.04-1 |
| O-ring | D4-4-66 (165×8.6) |
| Limit plate | 104.18.08 |
| Retainer.Oil Seal | 104.06.17 |
| Elbow bend | |
| Elbow bend | GB3289.2-82 (Rc1 1/2) |
| Sleeve.hose union | GB3289.26-82 (R1 1/2) |
| Shim | 104.18.09 |
| Plate. stop (outside) | 104.06.21 |
| Gage. oil | 104-07.50.00 |
| Limit Plate | 104.18.10 |
| Pin.bail | 104.14.06 |
| Plate. stop (outside) | |
| Connecting body14/R1/4 | F11-1.11-93 |
| Plug | 104.05.31 (4″) |
| Gasket | 104.18.05 |
| Screw with head-holes | GB32.1-88 (M16x30) |
| Wire | |
| Plate. end | 104.06.14 |
| Screw | 104.06.18 (G1″) |
| Gasket | 104.18.06 |
| Pneumatic mtor and drive system | 104.07.06.00 |
| Out-rub piece 1 | 104.07.06.07 |
| Out-rub piece II | 104.07.06.08 |
| Out-rub piece III | 104.07.06.09 |
| Out-rub piece IV | 104.0106.10 |
| Out-rub piece V | 104.0106.11 |
| Inner-rub piece I | 104.07.06.31 |
| Inner-rub piece II | 104.07.06.32 |
| Inner-rub piece III | 104.07.06.33 |
| Inner-joint cover | 104.07.06.34 |
| Adding power cover | 104.07.06.16 |
| Snap ring | GB893.1-87 (75) |
| Bearing | 109 |
| Spring | 104.07.06.17-1 |
| Bearing | 8118 |
| Spring seat | 104.07.06.18 |
| Drain plug | 104.07.06.19 |
| Clutch body | 104.07.06.20 |
| 0-ring | D4-4-66 (175×8.6) |
| 0-ring | D4-4-66 (180×3.1) |
| Shuck | 104.07.06.21 |
| Piston | 104.07.06.22 |
| 0-ring | D4-4-66 (110X5.7) |
| Cover | 104.07.06.23 |
| Snap ring | GB893.1-87 (90) |
| Bearing | 32510 |
| Gear shaft | 104.07.06.24 |
| Packing. assembly | 104.05.30.00 |
| Nut. upper packing gland | 104.05.30.07 |
| Housing.packing gland (upper) | 104.05.30.01-1 |
| Spacer.top packing | 104.05.30.02-1 |
| 0-ring | D4-4-66 (135×5.7) |
| Packing | 104.05.30.08 |
| Spacer. top | 104.05.30.09 |
| Wash pipe | 104.05.30.14 |
| Snap ring | 104.05.30.04-1 |
| Spacer. lower | 104.05.30.10 |
| Spacer | 104.05.30.05-1 |
| Grease fitting | GB1152-89 (M10X1) |
| Housing packing gland (lower) | 104.05.30.06-1 |
| Spacer. middle | 104.05.30.11 |
| Spacer. bottom packing | 104.05.30.12 |
| 0-ring | D4-4-66 (120×5.7) |
| Screw | GB75-66 (M10x12) |
| Nut. lower packing gland | 104.05.30.13 |
| Plate. name | 104.18.11 |
| Bearing | 9019456Q |
| Body | 104.18.12 |
| 0-ring | —— |
| Screw. hex soc hd | —— |
| Bearing | GB283-81 (32240) |
| Retainer.oil seal | —— |
| Plug | —— |
| Screw | —— |
| Gasket | —— |
| Seal.oil | —— |
| Spacer | —— |
| Plate. end | —— |
| Screw. hex soc hd | —— |
| Washer. spring | —— |
| Bushing (lower) | 104.06.15 |
| O-ring | — |
| Coupling | 104.14.15 |
| Protector. thread | 104.06.12 |
| Grease fitting | GB1152-89 (M10x1) |
| Connecting body14/R1/4 | F11-1.8-93 |
| Union pipe swing | GB3289.37-82 (Rcl 1/2) |
| Pipe | 104.07.02.00-1 |
| Nut | GB3763-83 (M22x1.5) |
| Pipe nipple | 104.07.16 |
| soft pipe assembly | 104.07.03.00-2 |
| soft pipe assembly | 104.07.04.00-2 |
| Shim | 104.18.04 ($450/370 51) |
| Bolt | GB32.1-88 (M20x55) |
| Screw | 104.18.07 (H20x1.5) |
| Gasket | D3-2-67 (20×30 6 2) |
| Socket wrench | GB5356-85 (S=10) |
| Socket wrench | GB5356-85 (S=17) |
| Socket wrench | GB5356-85 (S=12) |
| Pneumatic motor and drive system | 104.07.06.00 |
| Pneumatic motor | FMS-20 |
| Sleeve, hose union | GB3289.26-82 (R2) |
| Elbow bend | GB3289.2-82 (Rc2) |
| Bolt | GB5783-86 (M16x35) |
| Washer, spring | GB93-87 (16) |
| pedestal | 104.07.06.03 |
| Small gear | 104.07.06.04 |
| Snap ring | GB894.1-86 (28) |
| Bearing | 36110 |
| 0-ring | D4-4-66 (16×2.4) |
| Spacer | 104.07.06.05 |
| woolen ring | 104.07.06.35 |
| Bearing | 8120 |
| Out-joint cover | 104.07.06.06 |
| Bolt | GB5783-86 (H12x30) |
| Pin | 104.07.06.25 (12n6x32) |
| Shim | 104.07.06.26 |
| Flat key | GB1096-79 (14×28) |
| Shaft End Plate | C6-3-92 (60) |
| Bolt | GB32.1-88 (M8x16) |
| Iron wire | 中1×100 |
| Screw | GB70-85 (M12x25) |
| Washer | GB93-87 (12) |
| Flat key | GB1096-79 (14×36) |
| Gear | 104.07.06.27 |
| Circle nut | 104.07,06.28 |
| Washer | GB858-88 (48) |
| Snap ring | GB893.1-86 (72) |
| Bearing | 32207 |
| Pipe | 104.07.02.03 |
| Stud | GB898-88 (H12x30) |
| Nut | GB6170-86 (M12) |
| Bolt | GB5781-86 (M12x110) |
| Pneumatic connector | |
| Connecting body | F3-63-80 |
| O-ring | D4-4-66 (60×3.1) |
