| Pulsation dampener | 107. 130. 00-2 |
| Screw | 107.130.15 (M33x2-2a) |
| Casing | 107. 130. 01-1 |
| Diaphragm | 107. 130. 01. 00-1 |
| Diphragm stabilizer | 107. 130. 02 |
| Main bearing retainer plate | 107. 130. 04 |
| Bolt | 107. 130. 05 (1″-8UNC-2A) |
| Washer | GB93-87 (27) |
| Screw plug | 107. 130. 13 (1/4″-18NPT) |
| Lifting screw | GB825-88 (M20) |
| Pipe cap | 107. 130. 06 (G5/8″) |
| Washer | 107.130.07 |
| T-joint | 107.130.08 |
| Washer | 107.130.09-1 |
| Washer | 107.130.10-1 |
| Pressure gauge | Y-100 |
| Cut-off valve | 107. 130. 03. 00 |
| Cover | 107. 132. 04 |
| Nut | 107. 132. 05 (M48x3-2a) |
| Stud | 107. 132. 06 (M48x3-2a) |
| 0-ring | D4-4-66 (140×5.7) |
| Flange | 107. 130. 16 |
| Nut | 107.04.110.44 (M33x2-2a) |
| Stud | 107.130.03 (M33x2-2a L=100) |
| Lubrication system | 107.11.00 | |
| 1 | Head hole bolt | GB32.1-88 (M12x35) |
| 2 | Wire | Ø1.5 L=2000 |
| 3 | Joint body | F3-42-80(16-1/2″) |
| 4 | Oil pipe | 107.11.30.01 (Ø16X1.5L=350) |
| 5 | Oil pipe | 107.11.30.02 (Ø16X1.5L=750) |
| 6 | Left oil channel | 107.11.31.00 |
| 7 | Bolt | GB5733-86 (M12x40) |
| 8 | Nut | GB6170-86 (M12) |
| 9 | Oil retainer groover | 107.11.32.00 |
| 10 | Right oil chanel | 107.11.33.00 |
| 11 | Oil tank for gear(right | 107.11.34.(1l) |
| 12 | Oil tank for gear(left) | 107.11.35.00 |
| 13 | Joint body | F3-41-93 (16-1/2″) |
| 14 | Nut | GB5647-85 (16) |
| 15 | Pipe liner | GB5646-85 (16) |
| 16 | Oil trap | 107.11.36.00 |
| 17 | plug | 107. 04. 30. 04 |
| 18 | Nut | GB6170-86 (M6) |
| 19 | Socket | 107.11.30.04 (φ10×1 L=30) |
| 20 | Gasket | 107. 04. 30. 05 |
| 21 | Magnetic block | 107. 04. 30. 06-1 |
| 22 | Socket | 107.11.30.04 (φ10×1 L=10) |
| 23 | Rod | 107. 04. 30. 08 |
| 24 | Cotter pin | GB91-86 (2×12) |