| ITEM | DESCRIPTION | PN |
| Ditch Witch 255SX spare parts list | ||
| DECAL LOCATION 255SX | 275-568 | |
| 1 | OIL LEVEL | 275-023 |
| 2 | IMPORTANT SAFETY RULES | 275-048 |
| 3 | CHOKE | 275-086 |
| 4 | IGNITION SWITCH | 275-087 |
| 5 | RESERVOIR | 275-120 |
| 6 | DITCH WITCH ID | 275-172 |
| 7 | FUEL TANK | 275-173 |
| 8 | DANGER ROTATING SHAFT | 275-197 |
| 9 | BATTERY | 275-203 |
| 10 | CAUTION BATTERY ACID | 275-245 |
| 11 | BORING | 275-343 |
| 12 | CAUTION HOT PARTS | 275-355 |
| 13 | PARKING BRAKE | 275-361 |
| 14 | NEUTRAL RELEASE | 275-386 |
| 15 | AXLE LOCK | 275-392 |
| 16 | CONSOLE PANEL | 275-393 |
| 17 | LOCK RELEASE | 275-394 |
| 18 | 255SX MODEL ID | 275-395 |
| 19 | WARNING ROLLOVER | 275-407 |
| 20 | PLOW SWING LOCK | 275-413 |
| 21 | WARNING FLAMMABLE | 275-419 |
| 22 | ACCENT STRIPE 1 1″ X 60″ ) | 275-430 |
| 23 | DITCH WITCH EMBLEM PLAQUE | 275-450 |
| DECAL KIT 255SXH | ||
| DECAL KIT – 255SXH | 275-811 | |
| 1. | IMPORTANT USE GUIDE | 273-077 |
| 2. | DITCH WITCH -ID | 275-172 |
| 3. | 255SX MODEL-ID | 275-395 |
| 4. | 255SX OPERATOR INSTRUCTIONS | 273-245 |
| 5. | DITCH WITCH BATTERY | 273-267 |
| 6. | NOTICE OIL LEVEL | 274-198 |
| 7. | FUEL SHUTOFF ALERT | 274-208 |
| 8. | ONE CALL NOTIFICATION | 274-724 |
| 9. | OIL LEVEL | 275-023 |
| 10. | IMPORTANT SAFETY RULES | 275-048 |
| 11. | CHOKE | 275-086 |
| 12. | RESERVOIR (THF) | 275-120 |
| 13. | FUEL TANK (GASOLINE) | 275-173 |
| 14. | DANGER ROTATING SHAFT | 275-197 |
| 15. | BATTERY | 275-203 |
| 16. | CAUTION BATTERY ACID | 275-245 |
| 17. | CAUTION HOT PARTS | 275-355 |
| 18. | PARKING BRAKE | 275-361 |
| 19. | AXLE LOCK | 275-392 |
| 20. | CONSOLE | 275-393 |
| 21. | LOCK RELEASE | 275-394 |
| 22. | WARNING ROLLOVER | 275-407 |
| 23. | PLOW SWING LOCK | 275-413 |
| 24. | WARNING NO FLAME | 275-419 |
| 25. | LOGO PLACARD | 275-450 |
| 26. | IGNITION SWITCH | 700-072 |
| 27. | STRIPE (1.437″, SOLD PER 1″) | 275-430 |
| 28. | MAIN FUSE 25 AMP | 273-418 |
| DNAN ENGINE 255SX ENDS WITH | ||
| 1 . | LOCKNUT (1/2-NC) | 105-065 |
| 2. | BOLT (1/2-NC X 1-3/4″) | 105-066 |
| CAP SCREW (1/2-NC X 2″) | 105-229 | |
| BOLT (3/8-NC X 2-1 /2″, GD 8) | 105-183 | |
| 3. | FLG LOCKNUT (1/4-NC) | 105-832 |
| 4. | FLG LK BOLT (1/4-NC X 3/4″) | 105-820 |
| 5. | SETSCREW (3/8-NC X 1/2″) | 105-716 |
| 6. | FLG LK BOLT (3/8-NC X 1-1/4″) | 105-827 |
| 7. | FLG LK BOLT (1/2-NC X 1-1/4″) | 105-830 |
| 8. | FLANGE LOCKNUT (3/8-NC) | 105-834 |
| 9. | BOLT-ON CLAMP (1/2″) | 110-126 |
| 10. | CAP (08JF ) | 154-089 |
| 1 1 . | ADAPTER UNION (08NF-08JF) | 154-104 |
| 12. | BK CONNECTOR (08J90BK ) | 154-148 |
| 13. | HOSE (08N-9″-2000) | 155-375 |
| 14. | KEY (1/4″ X 1-1/4″) | 165-927 |
| 15. | SLEEVE | 181-548 |
| 16. | DOUBLE UNIVERSAL JOINT | 182-109 |
| 17. | ONAN ENGINE (NHC) | 11 95-377 |
| ONAN ENGINE (P224 ) | 195-398 | |
| 18. | CONTROL CABLE (ENGINE THROTTLE) | 195-950 |
| 19. | CONTROL CABLE (CHOKE) | 195-951 |
| 20. | EXHAUST MUFFLER | 1196-068 |
| EXHAUST MUFFLER | 194-270 | |
| 21 . | U-BOLT CLAMP (1-5/8″) | 196-071 |
| 22. | PUMP MOUNT | 325-075 |
| 23. | PUMP SUPPORT | 325-076 |
| 24. | HEAT SHIELD | 196-073 |
| 25. | LOCKNUT (1/2-NC) | 105-065 |
| LOCKNUT (3/8-NC) | 105-834 | |
| 26. | WASHER (1/2″) | 105-244 |
| WASHER (3/8″) | 105-264 | |
| 27. | ADAPTER UNION (06N-08J90) | 154-201 |
| 28. | HOSE (08JFX-22.5 “-2000 | 154-576 |
| 29. | HOSE HANGER BRACKET | 325-128 |
| 30. | FLG LK BOLT (5/16-NC X 1 “) | 105-873 |
| 31 . | FLG LOCKNUT (5/16-NC) | 105-003 |
| NOT | SHOWN: | |
| 255SX SERVICE KIT (INCLUDES ONE | 191-240 | |
| FOAM (AIR CLEANER) | 195-367 | |
| ELEMENT (AIR CLEANER) | 195-368 | |
| ELEMENT (ENGINE OIL FILTER) | 155-938 | |
| HONDA ENGINE 255SX BEGINS WITH S/N 4X0175 | ||
| 1. | engine – honda | 194-037 |
| fuel filter | 159-244 | |
| 2. | knob (1/4-nc, org) | 111-064 |
| 3. | throttle cable (50″) | 196-080 |
| 4. | choke cable (59-1/16″) | 195-951 |
| nut (3/8-NF) | 105-093 | |
| lock washer (3/8″) | 105-072 | |
| 5. | cable clamp | 110-741 |
| 6. | screw (M5-0.80 X 16mm, PAN PLPS) | 106-542 |
| 7. | lock washer (#io) | 195-418 |
| 8. | washer (.191″) | 106-205 |
| 9. | muffler bracket | 310-128 |
| 10. | outer filter | 194-223 |
| 11. | hd muffler guard | 362-829 |
| 12. | flg screw (#10-16 X 1/2″) | 105-804 |
| 13. | spark arrester | 196-224 |
| 14. | flg screw (M6-1.00 X 10mm) | 106-224 |
| 15. | engine oil filter | 159-209 |
| 16. | flg locknut (3/8-NC) | 105-834 |
| 17. | locknut (1/2-nc) | 105-065 |
| 18. | set screw (3/8-NC X 1/2″) | 105-716 |
| 19. | flg LK bolt (3/8-NC X 1-1/4″) | 105-827 |
| 20. | pump support | 325-076 |
| 21. | flg LK bolt (5/16-NC X 1″) | 105-873 |
| 22. | hose hanger bracket | 325-128 |
| 23. | flg locknut (5/16-NC) | 105-003 |
| 24. | double universal joint | 182-109 |
| 25. | key (1/4″ X 1-1/4″) | 165-927 |
| 26. | flg screw (M8-1.25 X 20mm, GD8) | 106-162 |
| 27. | flg locknut (M8-1.25) | 106-386 |
| 28. | flg locknut (3/8-NC) | 105-845 |
| 29. | washer (mio, hardened) | 106-396 |
| 30. | bolt (3/8-NC X 2-1/2″, GD8) | 105-183 |
| 31. | pump mount | 325-075 |
| 32. | flg LK bolt (1/2-nc X 1-1/4″) | 105-830 |
| 33. | hose (08JFX-18″-2000) | 154-563 |
| 34. | CONNECTOR (M14-1.50-08J90) | 154-238 |
| 35. | BK CONNECTOR (08J-08J90Bk) | 154-148 |
| 36. | CAP (08J F) | 154-089 |
| 37. | flg LK bolt (1/4-nc X 3/4″) | 105-820 |
| 38. | flg locknut (i/4-nc) | 105-832 |
| 39. | muffler | 194-182 |
| exhaust gasket | 165-807 | |
| FOOTNOTES: | ||
| 1. | SUPERSEDED WITH KIT# 190-1714 | |
| 2. | flg screw (ref #12) is used to hold ref #13 | |
| muffler | ||
| 3. | #680 and torque TO 80-90 FT/LBS. | use loctite |
| FRONT STEERING AND DRIVE | ||
| 1 . | FLG SCREW (#10-24 X 1/2″) | 105-214 6 |
| 2. | FLG LK BOLT (3/8-NC X 1″) | 105-826 3 |
| 3. | CLIP NUT (3/8-NC) | 106-719 3 |
| 4. | FUEL CAP ( 1 -1 /2″ ) | 110-010 1 |
| 5. | MAGNET | 110-130 1 |
| 6. | FILLER NECK | 110-132 1 |
| 7. | WORM CLAMP (1/4″ TO 5/8″) | 110-249 9 |
| 8. | REDUCER (04N-02NF) | 115-181 1 |
| 9. | BULK HOSE (5/16″, SOLD PER 1″) | 116-108 AR |
| 10. | BULK HOSE (5/16″, SOLD PER 1″) | 116-108 AR |
| 1 1 . | PLUG (06S ) | 155-130 1 |
| 12. | FUEL FILTER (05H-05H, IN-LINE) | 155-941 1 |
| 13. | S/0 SHUT-OFF (02N-05H90) | 156-239 1 |
| S/0 SHUT-OFF (02N-03H90) | 156-064 1 | |
| 14. | FILLER NECK GASKET | 165-626 2 |
| 15. | FUEL SENDER | 217-510 1 |
| FLG SCREW (# 10-24 X 1/2″) | 105-214 | |
| GASKET | 165-704 | |
| NUT (#10-32) | 506-021 | |
| 16. | FUEL TANK | 360-856 1 |
| FUEL TANK | 364-654 1 | |
| 17. | FLG LK BOLT (3/8-NC X 1-1/4″) | 105-827 3 |
| 18. | FLG LOCKNUT (3/8-NC) | 105-834 3 |
| 19. | S/0 SHUT-OFF (05H-05H) | 153-762 1 |
| 20. | BULK HOSE (1/4″, SOLD PER 1 “”) | 115-381 AR |
| 21 . | S/0 SHUT-OFF (04H-04H) | 156-286 1 |
| 22. | BULK HOSE (1/4″, SOLD PER 1″) | 115-381 AR |
| 23. | STRAINER BASKET | 153-606 1 |
| FRONT STEERING AND DRIVE BEGINS WITH S/N 4V0649 | ||
| 1. | LUG NUT (7/16-NF) | 105-054 |
| 2. | TIE ROD | 160-435 |
| 3. | BOLT (3/8-NC X 1-3/4″) | 105-150 |
| 4. | TIE ROD END | 160-377 |
| 5. | SLOTTED JAM NUT (1-NS) | 105-317 |
| 6. | BOLT (3/4-NC X 1-1/4″,NYLOK) | 105-379 |
| 7. | WASHER (3/4″) | 105-384 |
| 8. | JAM NUT (5/8-NC) | 105-403 |
| 9. | LOCK WASHER (3/4) | 105-389 |
| 10. | JAM NUT (3/4-NF) | 105-404 |
| 11. | MACHINERY BUSHING | 105-409 |
| 12. | BOLT (5/8-NC X 2-1/4″) | 105-462 |
| 13. | WASHER (3/4″) | 105-422 |
| 14. | COTTER PIN (3/16″ X 2″) | 105-502 |
| 15. | BRONZE BUSHING | 125-403 |
| 16. | SETSCREW (1/4-NC X 3/8″) | 105-705 |
| 17. | FLG LK BOLT (1/2-NC X 1″) | 105-829 |
| 18. | FRONT AXLE | 161-066 |
| 19. | FLANGE LOCKNUT (3/8-NC) | 105-834 |
| 20. | BOLT (3/4-NC X 1-1/4″,NYLOK) | 105-379 |
| 21. | MACHINERY BUSHING (1-3/8″) | 110-003 |
| 22. | BUSHING (1-1/4″, 14GA) ZERK (1/4-NF 45A) | 110-055 |
| 23. | 115-006 | |
| 24. | BEARING | 125-209 |
| 25. | STEERING CRANK | 361-857 |
| 26. | COMPOSITION BUSHING | 125-435 |
| 27. | FLANGE BEARING | 125-606 |
| SET SCREW (1/4-NC X 3/8″ 133″, CUP) | 105-705 | |
| LOCK COLLAR | 125-704 | |
| 28. | COMPOSITION BUSHING | 125-737 |
| 29. | PIN | 183-409 |
| 30. | AXLE YOKE | 182-062 |
| 31. | CROSS AND BEARING | 180-723 |
| ZERK (1/8-NPT,22.5A) | 115-010 | |
| BEARING CAP | 180-760 | |
| 32. | SPROCKET (60B21) | 175-473 |
| FRONT SPROCKET | 175-453 | |
| 33. | SPINDLE AND YOKE | 160-148 |
| 34. | WHEEL FLANGE | 160-149 |
| 35. | TIE ROD END | 160-314 |
| 36. | LEFT STEERING PIVOT | 160-387 |
| 37. | RIGHT STEERING PIVOT | 160-388 |
| 38. | TIE ROD | 160-389 |
| 39. | MACHINERY BUSHING | 110-096 |
| 40. | WASHER (9/16) | 105-088 |
| CHAIN DRIVE | ||
| 1 . | BOLT {3/8-NC X 1-3/4″) | 105-150 |
| 2. | LOCK WASHER (3/8″) | 105-072 |
| 3. | RETAINER BUSHING | 181-764 |
| 4. | SETSCREW (3/8-NC X 1/2″) | 105-716 |
| 5. | ROLLER CHAIN (#60. 65P) | 130-225 |
| 6. | OFFSET LINK (#60) | 130-202 |
| 7. | CONNECTOR LINK (#60) | 130-203 |
| 8. | ROLLER CHAIN (#60. 67P) | 130-226 |
| 9. | KEY (3/16″ X 1 “, HT) | 166-832 |
| 10. | SPACER | 184-244 |
| 1 1 . | FLG LK BOLT (1/2-NC X 1″) | 105-829 |
| 12. | WASHER (1/2″) | 105-398 |
| 13. | IDLER SPROCKET | 1 75-451 |
| 14. | BRONZE BUSHING (1 “) | 125-432 |
| 15. | REAR IDLER | 361-859 |
| 16. | FRONT IDLER | 361-860 |
| 17. | DRIVE SPROCKET | 175-472 |
| REAR AXLE | ||
| 1 . | BOLT (3/8-NC X 1″) | 105-031 |
| 2. | LOCKNUT (3/8-NC) | 105-047 |
| 3. | LUG NUT (7/16-NF) | 105-054 |
| 4. | LOCKNUT (1/2-NC) | 105-065 |
| 5. | WASHER (1/2″) | 105-071 |
| 6. | BOLT (1/2-NC X 2-1/2″) | 105-082 |
| 7. | NUT (3/8-NF) | 105-093 |
| 8. | LUG BOLT (7/16-NF X 1-3/8″) | 105-171 |
| 9. | CARRIAGE BOLT (3/8-NC X 1-1/4″) | 105-249 |
| 10. | COTTER PIN (3/32″ X 1″) | 105-508 |
| 1 1 . | ROLL PIN (3/16″ X 1-1/4″) | 105-525 |
| 12. | SET SCREW (5/16-NC X 3/8″) | 105-701 |
| 13. | KNOB (1/2-NC, BLACK) | 110-022 |
| KNOB (1/2-NC, BLUE) | 110-377 | |
| 14. | CLEVIS PIN (3/8″ X 1.078″) | 110-053 |
| 15. | ROD END (3/8-NF, FM) | 110-102 |
| 16. | MACHINERY BUSHING (1-3/4″) | 110-054 |
| J7, . | CLEVIS (3/8-NF) | 110-285 |
| CLEVIS (3/8-NF) | 110-027 | |
| 18. | BALL BEARING | 125-011 |
| LOCK COLLAR | 125-704 | |
| SET SCREW (5/16-NC X 1/4″) | 105-704 | |
| ig. | BRONZE BUSHING (1-1/4″ ID) | 125-415 |
| 20. | BRONZE BUSHING (3/4″ ID) | 125-424 |
| 21 . | BRONZE BUSHING (1/2″ ID) | 125-431 |
| 22. | FLANGE BEARING (1.375″ ID) | 125-607 |
| 23. | REAR AXLE ASSEMBLY | 161-067 |
| 24. | BELL CRANK PLATE | 361-855 |
| 25. | KEY (5/16″ X 3″) | 165-939 |
| 26. | CONNECTOR LINK | 361-854 |
| 27. | SPROCKET (#60, 30T) | 1 75-471 |
| 28. | BRASS BUSHING (1.25″ ID) | 180-118 |
| 29. | CLUTCH HUB | 180-606 |
| 30. | SHIFTING COLLAR | 180-617 |
| 31 . | LOCK HUB | 180-664 |
| 32. | BUSHING | 181-758 |
| 33. | SHIFT PIVOT SLEEVE | 181-759 |
| 34. | TIRE (23 X 10.50-12, B4TL) | 205-120 |
| T/W (23 X 10.50-12, B4TL) | 205-817 | |
| T/W (23 X 10.50-12, TYR) | 205-820 | |
| 35. | WHEEL ASSEMBLY | 205-290 |
| 36. | SHIFT FORK BAR ASSEMBLY | 361-849 |
| 37. | SHIFT HANDLE | 361-851 |
| 38. | BELLCRANK LEVER ASSEMBLY | 361-852 |
| 39. | BOLT (1/2-NC X 1-3/4″) | 105-066 |
| 40. | VALVE STEM | 205-164 |
| 41 . | VALVE CAP | 205-165 |
| NOT SHOWN: | ||
| TYRFIL (85 LBS/TIRE) | 205-173 | |
| REAR AXLE BEGINS WITH S/N 4F0062 | ||
| 1. | LOCKNUT (3/8-NC) | 105-047 |
| 2. | LUGNUT (7/16-Nf) | 105-054 |
| 3. | LUGBOLT (7/16-NF X 1-3/8″) | 105-171 |
| 4. | BOLT (1/2-NC X 2″) | 105-229 |
| 5. | CARRIAGE BOLT (3/8-NC X 1-1/4″) | 105-249 |
| 6. | COTTER PIN (1/8″ X 1″) | 105-509 |
| 7. | ROLL PIN (1/4″ X 1-1/2″) | 105-510 |
| 8. | SETSCREW (5/16-NC X…”) | 105-701 |
| 9. | BOLT (3/8-NC X 1″) | 105-826 |
| 10. | FLANGE LOCKNUT ((1/2-NC) | 105-833 |
| 11. | FLANGE LOCKNUT (3/8-NC) | 105-834 |
| 12. | JAM NUT (3/8-NF) | 106-018 |
| 13. | CLEVIS (3/8-NF) | 110-027 |
| 14. | CLEVIS PIN (3/8″) | 110-053 |
| 15. | MACHINERY BUSHING (14GA X 1-7/8″) | 110-055 |
| 16. | MACHINERY BUSHING (18GA X 1-1/4″) | 110-095 |
| 17. | KNOB (1/2-NC, BLUE) | 110-377 |
| 18. | ZERK (04NF, 90) | 115-003 |
| 19. | COMPRESSION SPRING | 115-637 |
| 20. | COMPRESSION SPRING | 115-638 |
| 21. | BALL BEARING | 125-011 |
| LOCK COLLAR (1-1/4″) | 125-704 | |
| SET SCREW (5/16-NC X.”) | 105-701 | |
| 22. | BRONZE BUSHING | 125-402 |
| 23. | FLANGE BEARING | 125-623 |
| SETSCREW (5/16-NC X.”) | 105-701 | |
| FLANGE BEARING | | 125-607 | |
| 24. | BALL JOINT (3/8-NF) | 160-350 |
| 25. | LOCKHUB | 161-088 |
| 26. | LOCKHUB | 161-104 |
| 27. | LEFT AXLE | 161-107 |
| 28. | RIGHT AXLE | 161-108 |
| 29. | SPROCKET (.750″ P, 30T) | 175-480 |
| 30. | MACHINERY BUSHING (2.375″ OD) | 180-118 |
| 31. | AXLE PIVOT BUSHING | 181-823 |
| 32. | ROD | 361-540 |
| 33. | MOUNT BRACKET | 363-059 |
| 34. | MOUNT BRACKET | 363-060 |
| 35. | ROD LEVER | 365-047 |
| 36. | SHIFT PLATE | 365-049 |
| 37. | SHIFT HANDLE | 365-053 |
| 38. | LOCKNUT (3/8-NF, GD2) | 505-113 |
| 39. | TIRE (23 X 10.5-12,B4TL,B/L) | 205-120 |
| TIRE AND WHEEL ASSEMBLY | 205-817 | |
| TIRE AND WHEEL ASSEMBLY | 205-820 | |
| 40. | WHEEL | 205-290 |
| 41. | VALVE STEM | 205-164 |
| 42. | VALVE CAP | 205-165 |
| NOT SHOWN | ||
| TYRFIL (85 LBS/TIRE) | 205-173 | |
| PARKING BRAKE ENDS WITH S/N | ||
| 1 . | FLG LOCKNUT (5/16-NC) | 105-003 |
| 2. | BOLT (5/16-NC X 1-1/2″) | 105-109 |
| 3. | JAM NUT (5/16-NF) | 105-294 |
| 4. | FLG BOLT (5/16-NC X 1″) | 105-873 |
| 5. | BALL JOINT | 160-335 |
| 6. | PARKING BRAKE LEVER | 163-037 |
| 7. | MOTOR LOCK CABLE | 163-038 |
| 8. | WASHER (5/16″) | 105-117 |
| g. | RETURN SPRING | 115-636 |
| PARKING BRAKE | ||
| 1 . | FLG LOCKNUT (5/16-NC) | 105-003 |
| 2. | BOLT (5/16-NC X 1-3/8. HH GD5) | 106-517 |
| 3. | IDLER BRACKET | 163-146 |
| 4. | FLG LK BOLT (5/16-NC X 1″) | 105-873 |
| 5. | DISC SPROCKET | 163-147 |
| 6. | PARKING BRAKE LEVER | 160-744 |
| T. | BRAKE CABLE | 163-083 |
| 8. | BRAKE CALIPER | 163-151 |
| 9. | BRONZE BUSHING (1″) | 125-432 |
| 10. | WASHER (1/2″) | 105-398 |
| 1 1 . | FLG LK BOLT (1/2-NC X 1″ ) | 105-829 |
| 12. | CLEVIS PIN (1/4″ X\ “) | 110-082 |
| 13. | COTTER PIN (1/16″ XV> | 105-530 |
| 14. | WASHER (5/16″) | 105-117 |
| 15. | GRIP (7/8″. ORANGE) | 110-469 |
| GRILLE AND PANELS | ||
| 1. | FLG LOCKNUT (5/16-NC) | 105-003 |
| 2. | LOCKNUT (5/16-NC) | 105-089 |
| 3. | CLIP NUT (5/16-NC) | 105-137 |
| 4. | EYE BOLT (5/16-NC X 3/4″) | 105-257 |
| 5. | FLG LK BOLT (5/16-NC X 3/4″) | 105-823 |
| 6. | FLG LK BOLT (3/8-NC X 1″) | 105-826 |
| 7. | FLG LK BOLT (3/8-NC X 3/4″) | 105-825 |
| 8. | CLIP NUT (3/8-NC) | 106-719 |
| 9. | CLIP NUT (3/8-NC) | 107-011 |
| 10. | COMPRESSION SPRING | 115-577 |
| 11. | LEFT PANEL | 325-026 |
| LEFT PANEL | 320-149 | |
| 12. | RIGHT PANEL | 325-029 |
| RIGHT PANEL | 320-148 | |
| 13. | BACK PANEL | 325-031 |
| BACK PANEL | 325-116 | |
| 14. | BATTERY COVER | 325-034 |
| 15. | BOTTOM PANEL | 325-062 |
| 16. | TOP PANEL | 325-063 |
| TOP PANEL | 320-140 | |
| 17. | REAR TOP PANEL | 325-070 |
| 18. | FRONT PANEL | 325-073 |
| FRONT PANEL (ROTO WITCH) | 325-074 | |
| 19. | UPPER GRILLE | 362-401 |
| 20. | LOWER GRILLE | 362-402 |
| LOWER GRILLE | 362-428 | |
| 21. | POP RIVET (3/16″ X .664″) | 110-348 |
| 22. | MANUAL COMPARTMENT | 318-588 |
| 23. | WASHER (5/16″) | 105-117 |
| 24. | FLG LOCKNUT (3/8-NC) | 105-834 |
| 25. | FLG LK BOLT (5/16-NC X 1.250) | 105-866 |
| DEFLECTORS | ||
| 1 . | CLIP NUT (5/16-NC) | 105-137 |
| 2. | FLG LK BOLT (3/8-NC X 1-1/4″) | 105-827 |
| 3. | FLG LK BOLT (5/16-NC X 1-1/4″) | 105-866 |
| 4. | FLG LK BOLT (3/8-NC X 1″) | 105-826 |
| 5. | FLG LOCKNUT (3/8-NC) | 105-834 |
| 6. | WASHER (5/16″) | 105-117 |
| 7. | TOP DEFLECTOR | 325-044 |
| 8. | DEFLECTOR | 325-045 |
| 9. | DEFLECTOR | 325-058 |
| 10. | DEFLECTOR | 325-061 |
| 1 1 . | DEFLECTOR | 325-066 |
| 12. | GROMMET (1-1/2″) | 115-320 |
| 13. | FLG LK BOLT (3/8-NC X 3/4″) | 105-825 |
| 14. | HEAT DEFLECTOR | 320-077 |
| 15. | CLIP NUT (3/8-NC) | 107-011 |
| 16. | BOLT (7/16-NC X 3/4″) | 105-896 |
| 17. | WASHER (3/8″) | 105-118 |
| 18. | BULK EDGE (1/16″, SOLD PER 1″) | 115-671 |
| 19. | UPPER HEAT DEFLECTOR | 320-252 |
| 20. | FLG LK BOLT (5/16-NC X 3/4″) | 105-823 |
| BATTERY TRAY AND CONSOLE | ||
| FLG LK BOLT (3/8-NC X 3/4″) | 1. 105-825 | |
| WASHER (5/16″) | 2. 105-117 | |
| FLG SCREW (#10-24 X .5″) | 3. 105-214 | |
| CLIP NUT (5/16-NC) | 4. 105-137 | |
| FLG LOCKNUT (3/8-NC) | 5. 105-834 | |
| HANDLE MOUNT ANGLE | 6. 325-126 | |
| SHOCK MOUNT | 7. 115-362 | |
| NUT (1/4-NC) | 8. 105-078 | |
| CONSOLE | 9. 325-032 | |
| CENTER PLATE | 10. 325-053 | |
| HAND REST | 11. 325-078 | |
| BATTERY HOLDER | 12. 325-082 | |
| BATTERY TRAY | 13. 325-083 | |
| CIRCUIT BREAKER (30 AMP) | 14. 215-065 | |
| FLG LOCKNUT (1/4-NC) | 15. 105-832 | |
| THROTTLE BRACKET | 16. 363-309 | |
| HAND REST | 17. 325-123 | |
| HAND REST ADJUSTMENT | 325-127 | |
| FAN-OIL COOLER | 18. 215-205 | |
| FLG LK BOLT (3/8-NC X 1″) | 19. 105-826 | |
| TIE DOWN ROD (1/4-NC X 7.2″) | 20. 325-086 | |
| MANUAL COMPARTMENT | 21. 318-588 | |
| FLG BOLT (1/4-NC X 3/4″) | 22. 105-820 | |
| RELAY – SPST | 23. 215-063 | |
| NUTSERT (1/4-NC) | 24. 106-015 | |
| COUNTERWEIGHT | ||
| COUNTERWEIGHT KIT | |1 00-2651 | |
| NO’S 1 THRU 7 | ||
| 1 . | LOCKNUT (3/4-NC) | 105-372 |
| 2. | WASHER (3/4″) | 105-422 |
| 3. | BOLT (3/4-NC X 11″) | 105-974 |
| 4. | SLEEVE | 180-016 |
| 5. | HANDLE PIN | 183-411 |
| 6. | WEIGHT RACK | 325-095 |
| 7. | WEIGHT | 325-098 |
| PLOW LIFT AND SWING | ||
| 1 . | PIN | 183-289 |
| 2. | WASHER (3/4″) | 105-422 |
| 3. | LK BOLT (3/4-NC X 1-1/4″, NLK) | 105-379 |
| 4. | WASHER (1/2″) | 105-475 |
| 5. | COTTER PIN (3/16″ X 2″) | 105-502 |
| 6. | FLANGE LOCK BOLT (3/8-NC X 1″) | 105-826 |
| 7. | FLANGE BOLT (1/2-NC X 1 “) | 105-829 |
| 8. | WASHER (1-1/32″) | 105-930 |
| 9. | BRZ BUSHING (1.25″ OD X 1.5″ LG ) | 125-407 |
| 10. | COMPOSITION BUSHING | 125-435 |
| 1 1 . | FIBER BUSHING | 125-728 |
| 12. | COMPOSITION BUSHING | 125-737 |
| 13. | PIN (1-3/8″ X 5-13/16″) | 180-506 |
| 14. | PIN (1-3/8″ X 5.3″) | 183-155 |
| 15. | PIN (1-3/8″ X 4-1/8″) | 183-277 |
| 16. | UPPER ARM ASSEMBLY | 325-099 |
| 17. | UPPER CLEVIS ASSEMBLY | 325-105 |
| 18. | LOWER CLEVIS ASSEMBLY | 325-110 |
| 19. | CYLINDER MOUNT ASSEMBLY | 325-113 |
| 20. | PIN (1-3/8″ X 8.3″) | 183-454 |
| SKID SHOES | ||
| SKID SHOE CONVERSION KIT | 190-220 | |
| 1 | SKID SHOE | 325-118 |
| 2 | RIGHT SUPPORT | 325-088 |
| 3 | LEFT SUPPORT | 325-087 |
| 4 | FLG LK BOLT (1/2-NC X 1-1/4″) | 105-830 |
| 5 | CARRIAGE BOLT (3/8-NC X 3/4″) | 105-835 |
| 6 | FLG LOCKNUT (3/8-NC) | 105-814 |
| VIBRATOR | ||
| LOCKNUT (3/8-NC) | 1. 105-047 | |
| LOCK WASHER (M12) | 2. 106-030 | |
| FLG LK BOLT (5/16-NC X 3/4 “) | 3. 105-823 | |
| BOLT (3/8-NC X 3-1/4″) | 4. 105-081 | |
| BOLT (1/2-NF X 1″) | 5. 105-172 | |
| FLANGE BOLT (3/8-NC X 3/4 “) | 6. 105-825 | |
| CLIP NUT (3/8-NC) | 7. 106-719 | |
| CLIP NUT (3/8-NC) | 8. 107-011 | |
| MACHINERY BUSHING (1.750″) | 9. 110-305 | |
| SIGHT GAUGE (16S) | 10. 110-111 | |
| CLIP PIN (7/16″ X 2″) | 11. 110-228 | |
| ISOLATOR, 80X57C 1/2-20 | 12. 115-341 | |
| EXTERNAL SNAP RING | 13. 115-456 | |
| BEARING | 14. 125-369 | |
| FIBER BUSHING (1″ LG) | 15. 125-728 | |
| TENSION BUSHING | 16. 125-734 | |
| PLUG (04S) | 17. 155-125 | |
| O-RING (904 D90) | 155-760 | |
| PLUG (16S) | 18. 155-138 | |
| O-RING (916 D90) | 155-748 | |
| O-RING (916 D90) | 19. 155-748 | |
| INTERNAL SEAL | 20. 157-501 | |
| KEY (3/8″ X 2-29/64″) | 21. 165-929 | |
| KEY (3/8″ X 63/64″) | 22. 165-980 | |
| LEFT VIBRATOR SHAFT | 23. 167-094 | |
| RIGHT VIBRATOR SHAFT | 24. 167-095 | |
| SHAFT SPACER | 25. 181-662 | |
| HANDLE PIN (1-3/8″ X 5-5/16″) | 26. 183-292 | |
| VIBRATOR WEIGHT | 27. 185-056 | |
| THRUST LOCKNUT (1.767-NF) | 28. 185-067 | |
| TANG LOCK WASHER (1.792″) | 29. 185-074 | |
| LEFT GEAR | 30. 185-099 | |
| RIGHT GEAR | 31. 185-100 | |
| VIBRATOR GEAR COVER | 32. 185-101 | |
| COVER PLATE | 33. 185-102 | |
| VIBRATOR ASSEMBLY | 34. 322-468 | |
| VIBRATOR PARTS ASSEMBLY | 325-119 | |
| COVER PLATE | 35. 325-052 | |
| FLG LK BOLT (3/8-NC X 1″) | 36. 105-826 | |
| LOCKWASHER (3/8) | 37. 105-072 | |
| BOLT (5/16-NC X 3/4 “) | 38. 105-090 | |
| MACHINE BUSHING (1-3/4″, 14GA) | 39. 110-054 | |
| REEL CARRIER | ||
| REEL CARRIER ATTACHMENT KIT | 100-512 | |
| 1 . | NUT (3/8-NC) | 105-053 |
| 2. | BOLT (3/8-NC X 1-1/2″) | 105-156 |
| 3. | CLIP PIN (7/16″ X 2″) | 110-228 |
| 4. | LOCK COLLAR | 181-659 |
| 5. | HANDLE PIN (1/2″ X 2″) | 183-411 |
| 6. | LIFT ARM ASSEMBLY | 318-241 |
| LIFT ARM ASSEMBLY | 318-253 | |
| 7. | ARBOR SHAFT | 318-247 |
| 8. | REEL TUBE | 318-248 |
| 9. | CABLE GUIDE | 318-249 |
| 10. | CABLE GUIDE | 318-250 |
| 1 1 . | CABLE GUIDE | 318-251 |
| 12. | FLANGE LOCK BOLT (3/8-NC XV> | 105-825 |
| 13. | FLANGE LOCKNUT (3/8-NC) | 105-834 |
| CONTROLS BEGINS WITH S/N 4E0072 | ||
| 1 . | FLG LOCKNUT (1/4-NC) | 105-832 |
| 2. | FLG LOCKNUT (5/16-NC) | 105-003 |
| 3. | PUSH ROD | 361-833 |
| 4. | LOCKNUT (1/2-NC) | 105-065 |
| 5. | LOCKWASHER (5/16″) | 105-091 |
| 6. | BOLT (1/4-NC X 1-3/4″) | 105-198 |
| 7. | LEVER | 361-840 |
| 8. | BOLT (1/2-NF X 1-1/4″) | 105-141 |
| 9. | LOCK PLATE | 365-017 |
| 10. | BOLT (5/16-NC X 2-3/4″) | 105-190 |
| 11 . | JAM NUT (5/16-NF) | 105-115 |
| 12. | BOLT (1/2-NC X 2″) | 105-229 |
| 13. | NUT (5/16-NF) | 105-213 |
| 14. | CONNECTOR LINK | 500-419 |
| 15. | COTTER PIN (1/16″ X 3/4″) | 105-530 |
| 16. | CONTROL | 361-844 |
| 17. | NUT (#10-24) | 105-186 |
| 18. | BOLT (#10-24 X 1 “, PAN SLT) | 105-815 |
| 19. | FLG LK BOLT (1/2-NC X 1″ ) | 105-829 |
| 20. | FLG LOCKNUT (1/2-NC) | 105-833 |
| 21 . | KNOB (1/2-NC, BLACK) | 110-022 |
| KNOB (1/2-NC, YELLOW) | 110-375 | |
| 22. | CLEVIS PIN (1/4″ X 11/16″) | 110-082 |
| 23. | PLUNGER | 365-013 |
| 24. | ROD END (1/2-NF, FM) | 110-290 |
| 25. | KNOB (3/8-NC, ORANGE) | 110-445 |
| 26. | CONTROL LEVER | 365-015 |
| 27. | COMPRESSION SPRING | 115-645 |
| 28. | BALL JOINT (5/16-NF) | 160-335 |
| 29. | SPACER | 181-635 |
| 30. | PUSH ROD | 361-832 |
| 31 . | WASHER (5/16″) | 105-117 |
| CONTROLS (ENDS WITH S/N 4E0071) | ||
| 1 . | DOG POINT BOLT (1/2-NC X 2-1/4″) | 106-026 |
| 2. | FLANGE LOCKNUT (5/16-NC) | 105-003 |
| 3. | LOCKNUT (3/8-NC) | 105-047 |
| 4. | LOCKNUT (1/2-NC) | 105-065 |
| 5. | BOLT (3/8-NC X 2″) | 105-075 |
| 6. | BOLT (1/4-NC X 2″) | 105-106 |
| 7. | SPEED U-NUT (1/4-NC) | 105-139 |
| 8. | BOLT (1/2-NF X 1-1/4″) | 105-141 |
| 9. | BOLT (5/16-NC X 2-1/2″, GD 8) | 105-178 |
| 10. | BOLT (5/16-NC X 2-3/4″) | 105-190 |
| 1 1 . | JAM NUT (5/16-NF) | 105-115 |
| 12. | BOLT (1/2-NC X 2″) | 105-229 |
| 13. | JAM LOCKNUT (5/16-NF) | 105-294 |
| 14. | ROLL PIN (1/4″ X 1 “) | 105-521 |
| 15. | COTTER PIN (1/16″ X3^”) | 105-530 |
| 16. | ROLL PIN (1/8″ XV) | 105-535 |
| 17. | LOCKNUT (#10-24) | 105-811 |
| 18. | BOLT (#10-24 X 1 “, PAN SLT HD) | 105-815 |
| 19. | BOLT (1/4-NC X 1-1/2″) | 105-818 |
| 20. | FLANGE LOCKNUT (1/4-NC ) | 105-832 |
| 21 . | KNOB (1/2-NC, BLACK) | 110-022 |
| 22. | CLEVIS PIN (1/4″ X”‘i6 ” ) | 110-082 |
| 23. | KNOB (3/8-NC, BLACK) | 110-283 |
| 24. | BALL JOINT (1/2-NF, FM) | 110-290 |
| 25. | HANDLE (1/2-NC, BLK) | 110-321 |
| 26. | EXTENSION SPRING (2-1/2″ LG) | 115-592 |
| EXTENSION SPRING (4″ LG ) | 115-600 | |
| 27. | COMPRESSION SPRING (5-15/16″ LG) | 115-604 |
| 28. | BALL JOINT (5/16-NF) | 160-335 |
| 29. | BALL JOINT SPACER | 181-635 |
| 30. | SPRING STOP | 181-761 |
| 31 . | ADAPTER | 183-414 |
| 32. | PUSH ROD (1.700″ LG) | 361-832 |
| 33. | PUSH ROD (1.500″ LG ) | 361-833 |
| 34. | TUBE | 361-836 |
| 35. | LOCK | 361-838 |
| 36. | LEVER | 361-840 |
| 37. | CONTROL ASSEMBLY | 361-843 |
| 38. | CONTROL ASSEMBLY | 361-844 |
| 39. | CONNECTOR LINK | 500-419 |
| 40. | FLANGE LOCKNUT (1/4-NC) | 105-832 |
| 41 . | BOLT (1/4-NC X 1 “) | 105-197 |
| POWER HYDRAULICS | ||
| CONNECTOR (08J-08S) | 1. 154-005 | |
| CONNECTOR (08J-10S90) | 2. 154-013 | |
| CONNECTOR (12J-12S) | 3. 154-027 | |
| CONNECTOR (12S-10S45) | 4. 154-051 | |
| UNION (08J-08JFX90) | 5. 154-111 | |
| CONNECTOR (08J-10S45) | 6. 154-127 | |
| HOSE (08JFX-37.5″-2000) | 7. 154-562 | |
| HOSE (12JF-33.5″-2250) | 8. 154-601 | |
| TRIPLE HYDRAULIC PUMP | 9. | 158-338 | | |
| SEAL REPAIR KIT | 500-490 | |
| HYDRAULIC CONTROL VALVE (4 SPOOL) | 10. 158-536 | |
| UNION (12J-12JFX90LG) | 11. 154-069 | |
| HYDRAULIC CONTROL VALVE (2 SPOOL) | 12. | 158-535 | | |
| HYDRAULIC CONTROL VALVE | 153-590 | |
| HOSE (08JFX-16”-3500) | 13. 154-566 | |
| UNION (08J-12JFX) | 14. 154-184 | |
| HOSE (08JFX-26.5″-2000) | 15. 154-577 | |
| PLUG (10S) | 16. 500-294 | |
| PLUG (08S, SOC, FM) | 17. 155-074 | |
| BUSHING (1-1/16-SAE X 1/2-NPT) | 18. 155-175 | |
| SUCTION LINE (1-1/27 X 10.20″) | 19. 156-398 | |
| HOSE CLAMP (1-1/4″ TO 2-1/8″) | 20. 110-250 | |
| SUCTION HOSE (1-1/2″ – USE 13″) | 21. 116-047 | |
| SLIP-ON COUPLER (20S-24H90) | 22. 155-176 | |
| STRAINER | 23. 110-336 | |
| TRIPLE PUMP AND PLUMBING | ||
| TRIPLE PUMP & PLUMBING KIT | 190-1490 | |
| 1 | TRIPLE PUMP (255SX) | 150-2268 |
| 2 | ELBOW (20S-20H45) | 514-426 |
| 3 | SPECIAL 90(20S-20H-20H) | 150-2239 |
| 4 | CONNECTOR (12J-12S45) | 154-047 |
| 5 | UNION (08J-12JFX) | 154-184 |
| 6 | WORM CLAMP(1-1/16″TO 1-15/16″) | 110-133 |
| 7 | BULK HOSE (1 1/4″, SOLD PER FT) | 116-587 |
| HYDRAULIC CONTROL VALVE TWO SPOOL | ||
| HYDRAULIC CONTROL VALVE | 158-535 | |
| HYDRAULIC CONTROL VALVE | 153-580 | |
| 1 . | SPOOL END CAP | 500-350 |
| 2. | LOCKOUT PLUNGER | 500-351 |
| 3. | LOCKOUT COMPRESSION SPRING | 500-352 |
| 4. | PORT ADAPTER PLUG KIT | 500-353 |
| O-RING (114 D70) | 500-163 | |
| 5. | LOCKOUT SEAL KIT | 500-354 |
| 6. | SEAT RETAINER PLUG KIT | 500-355 |
| O-RING (114 D70) | 500-163 | |
| 7. | SEAL REPAIR KIT | 500-357 |
| O-RING (112 D70) | 155-772 | |
| O-RING (114 D70) | 500-163 | |
| 8. | SPRING CENTERING KIT | 500-460 |
| ( INCL. REF. NO. 1 ) | ||
| HYD CNTRL VLV 4-SPOOL 255SX | ||
| HYDRAULIC CONTROL VALVE | 158-536 | |
| 1. | NUT (3/8-NF) | 105-093 |
| 2. | BOLT (3/8-NF X 9-1/2″) | 500-067 |
| 3. | PLUG (08S, ALN) | 155-074 |
| O-RING (908 D90) | 155-706 | |
| 4. | EXHAUST O-RING (021 D70, VITON) | 155-757 |
| 5. | PRESSURE O-RING (019 D70, VITON) | 155-758 |
| 6. | SEAL | 500-026 |
| 7. | LEVER BRACKET | 500-027 |
| 8. | STANDARD SPOOL POSITIONER KIT | 500-190 |
| 9. | BOLT )1/4-NC X 7/8″, GD 8 ALN | 500-192 |
| LOCK WASHER (1/4″) | 105-079 | |
| 10. | VALVE SECTION | 500-215 |
| 11. | INLET COVER | 500-296 |
| 12. | BACKUP WASHER (210 D90) | 500-299 |
| 13. | SEAL RETAINER | 500-300 |
| 14. | PLUG (12S) | 500-302 |
| O-RING (912 D90) | 155-709 | |
| 15. | LOAD CHECK PLUG KIT | 500-321 |
| 16. | PORT RELIEF CARTRIDGE KIT | 500-381 |
| 17. | TWO POSITION DETENT KIT | 500-382 |
| 18. | VALVE SECTION | 500-384 |
| 19. | SEAL DISC | 500-388 |
| 20. | OUTLET COVER | 500-298 |
| 21. | RP51N RELIEF CART (4500 PSI) | 157-365 |
| 22. | SPOOL O-RING | |
| 23. | VALVE SECTION | |
| COOLER FILTER AND RESERVOIR HYDRAULICS | ||
| 1 . | LOCKNUT (5/16-NC) | 105-089 |
| 2. | WASHER (5/16″) | 105-117 |
| 3. | BOLT (5/16-NC X 2-1/2″, GR8) | 105-178 |
| BOLT (5/16-NC X 2-1/4″, GR8) | 105-130 | |
| 4. | FLG LK BOLT (3/8-NC X 1″) | 105-826 |
| 5. | CLIP NUT (3/8-NC) | 106-719 |
| 6. | FILLER BREATHER (2-1/8″) | 110-008 |
| FLG SCREW (#10-24 X”2″) | 105-214 | |
| FILLER NECK GASKET | 165-626 | |
| 7. | FLG LK BOLT (3/8-NC X 1-1/4″) | 105-827 |
| 8. | MOUNT BLOCK (5/16, RUBBER) | |1 16-164 |
| MOUNT BLOCK (5/16. RUBBER) | 323-758 | |
| 9. | CONNECTOR (12S-12J90) | 154-014 |
| 10. | CONNECTOR (12S-12J) | 154-027 |
| 1 1 . | CONNECTOR (12S-12J45) | 154-047 |
| 12. | CONNECTOR (12J-16S90) | 154-145 |
| O-RING (916 D90) | 155-748 | |
| CONNECTOR (16S-12J90-02NF ) | 154-190 | |
| 13. | HOSE (12JF-28″-2250) | 154-570 |
| 14. | HOSE (12JF-33.5″-2250) | 154-601 |
| 15. | PLUG (06S ) | 155-130 |
| 16. | FLG LOCK BOLT (5/16-NC X 5/8″) | 501-325 |
| 17. | FILTER ELEMENT (1-1/2″-UNF) | 155-954 |
| 18. | FILTER HEAD (16SF-16SF) | 155-999 |
| 19. | OIL COOLER | 360-336 |
| 20. | HYDRAULIC RESERVOIR | 360-850 |
| HYDRAULIC RESERVOIR | 364-655 | |
| 21 . | GROMMET (1-1/2″) | 115-320 |
| 22. | SIGHT GLASS (2″) | 116-218 |
| 23. | REFLECTOR (ALUMINUM) | 360-849 |
| 24. | UNION (12J —12JFX90 ) | 154-026 |
| 25. | SHIM | 325-092 |
| 26. | FLG LOCKNUT (3/8-NC) | 105-834 |
| GROUND DRIVE HYDRAULICS | ||
| 1 . | NUT (1/2-NC) | 105-021 |
| 2. | LOCK WASHER (1/2″) | 105-070 |
| 3. | BOLT (1/2-NC X 2-1/4″, CSK | 1105-2801 |
| BOLT (1/2-NC X 2″) | 105-229 | |
| 4. | BOLT (3/8-NC X 2-1/2″.GD 8 | 105-281 |
| 5. | CONNECTOR (08J-08S) | 154-005 |
| O-RING (908 D90) | 155-706 | |
| 6. | CONNECTOR (08J-10S45) | 154-127 |
| O-RING (910 D90) | 155-707 | |
| 7. | CONNECTOR (08J-10S) | 154-031 |
| O-RING (910 D90) | 155-707 | |
| 8. | CONNECTOR (08J-08S90) | 154-074 |
| O-RING (908 D90) | 155-706 | |
| 9. | UNION (08J-08JFX90 ) | 154-1 1 1 |
| 10. | TEE (08J-08J-08J) | 154-133 |
| 1 1 . | HOSE (08JFX-22.5″-2000) | 154-576 |
| 12. | HYDRAULIC MOTOR | 155-590 |
| 13. | HYD MOTOR | 158-700 |
| 14. | COUNTERBALANCE MANIFOLD | 155-981 |
| 15. | COUNTERBALANCE CARTRIDGE | 500-471 |
| 16. | HOSE (08JF — 16″-3500) | 154-566 |
| 17. | HOSE (3/4—JIC X 20″) | 154-620 |
| HYDRAULIC CYLINDER | ||
| 1 . 2. | HYD. CYL (3″ X 1.187″ X 3.5″ ( INCL. REF. NO.’S 1-6) CYLINDER BARREL CYLINDER ROD | 151-007 150-267 1 150-367 1 |
| 3. | CYLINDER HEAD | |1 50-81 31 1 |
| 4. | CYLINDER HEAD LOCK RING (3″ ID) | 150-795 1 150-991 1 |
| 5. | PISTON | 150-952 1 |
| 6. | SEAL REPAIR KIT (3″ ID) | |1 90-1 511 1 |
| NOT | SEAL REPAIR KIT (3″ ID) ROD U-SEAL INSTALLER | 190-159 1 SHOWN: 259-100 |
| VIBRATOR HYDRAULICS | ||
| i. | bolt (3/8-NC X I-I/4″, SOC) | 105-757 |
| 2. | CONNECTOR (08J-I0S) | 154-031 |
| 3. | UNION (08J-08JFX90) | I54-III |
| 4. | CONNECTOR (I2S-08J90) | I54-II4 |
| 5. | HOSE (08JF-45″-2000) | 154-567 |
| 6. | hydraulic motor | 150-1699 |
| 7. | CONNECTOR (04J-06S) | I54-032 |
| 8. | CONNECTOR (I/8NPT X 7/I6 JIC X 90) | 154-158 |
| 9. | HOSE (04JFX-50″-2750) | I54-536 |
| io. | washer (mio, hardened) | I06-396 |
| VIBRATOR HYDRAULICS ENDS W/ S/N T70000468 | ||
| 1. | BOLT (3/8-NC X 1-1/4”) | 105-052 |
| 2. | CONNECTOR (08J-I0S) | 154-031 |
| 3. | UNION (08J-08JFX90) | 154-111 |
| 4. | CONNECTOR (I2S-08J90) | 154-114 |
| 5. | HOSE (08JF-45′-2000) | 154-567 |
| 6. | HYDRAULIC MOTOR | 155-589 |
| 7. | CONNECTOR (04N-04J90) | 154-021 |
| 8. | CONNECTOR (I/8NPT X 7/16 JIC X 90) | 154-158 |
| 9. | HOSE (04JFX-50″-2750) | 154-536 |
| 10. | LOCK WASHER (1/2″) | 105-070 |
| BORING ATTACHMENT HYDRAULICS | ||
| DRY BORE ATTACHMENT CONVER. KIT | 022-182 | |
| 1. | NUT (1/2-NC) | 105-021 |
| 2. | BOLT (1/2-NC X 2”) | 105-229 |
| 3. | FLANGE LOCK BOLT (1/2-NC X 1”) | 105-829 |
| 4. | LOCK WASHER (.500”) | 105-070 |
| 5. | CONNECTOR (08J-10S90) | 154-013 |
| 6. | CONNECTOR (08J-10S) | 154-031 |
| 7. | CONNECTOR (08J-08S90) | 154-074 |
| 8. | ADAPTER UNION (08J-08JFX90) | 154-111 |
| 9. | HOSE (08J FX-37.5”-2000) | 154-562 |
| 10. | HYDRAULIC MOTOR | 155-579 |
| 11. | CROSS AND BEARING KIT | 180-723 |
| ZERK (1/8-NPT X 22-1/2 DEG) | 115-010 | |
| BEARING CAP (1-1/8”) | 180-760 | |
| 12. | YOKE | 182-155 |
| QUICK DISCONNECT YOKE | 182-227 | |
| ROTO WITCH YOKE | 178-926 | |
| SLIDE LOCK REPAIR KIT | 190-125 | |
| SLIDE LOCK REPAIR KIT | 190-173 | |
| 13. | YOKE (1-1/4”, 5/16 ” KWY) | 182-092 |
| 14. | MOUNT BRACKET | 325-077 |
| 15. | YOKE GUARD ASSEMBLY | 351-219 |
| 16. | COTTER PIN (1/16” X 3/4”) | 105-530 |
| 17. | CLEVIS PIN (1/4” X 11/16”) | 110-082 |
| 18. | LEVER | 361-840 |
| 19. | CONNECTOR LINK | 500-419 |
| 20. | DRILL STRING GUIDE ASSEMBLY | 118-097 |
| HAND HELD GUIDE ROD ASSEMBLY | 351-351 | |
| HYDRAULIC MOTOR | ||
| HYDRAULIC MOTOR | 155-579 | |
| HYDRAULIC MOTOR | 155-580 | |
| HYDRAULIC MOTOR | 153-280 | |
| 1. | SEAL REPAIR KIT | 500-347 |
| 2. | O-RING (011 D70) | 155-771 |
| 3. | O-RING (904 D90) | 155-760 |
| 4. | KEY (5/16″ X 1″) | 165-915 |
| 5. | LOCKNUT (1-20 NEF) | 105-418 |
| 6. | COTTER PIN (1/8″ X 2″) | 105-501 |
| ELECTRICAL SCHEMATIC | ||
| 1 . | SYSTEM GROUND | BLK |
| 2. | BATTERY | RED |
| 3. | FUSED BATTERY | RED/BLU |
| 4. | START | WHT/BLK |
| 5. | ACCESSORY CIRCUIT | ORG |
| 6. | IGNITION CIRCUIT | ORG/GRN |
| 7. | AC OUTPUT TO REGULATOR/RECTIFIER | GRA |
| 8. | AC OUTPUT TO REGULATOR/RECTIFIER | GRA |
| 9. | FUEL SENDER TO FUEL GAUGE | BRN |
| 10. | TEMPERATURE SWITCH TO FAN RELAY | GRN |
| 1 1 . | ENGINE STOP RELAY TO ENGINE STOP DIODES | BLK/RED |
| 12. | FAN RELAY TO FAN MOTOR | BLU/YEL |
| ELECTRICAL DIAGRAM | ||
| 1. | RECTIFIER REGULATOR (20 AMP) | 499-580 |
| 2. | BATTERY CABLE (4 GA X 65″, | 215-313 |
| 3. | BATTERY | 215-252 |
| FLG LOCKNUT (1/4-NC) | 105-832 | |
| BOLT (1/4-NC X 3/4″, GD8) | 105-865 | |
| 4. | BATTERY CABLE (4 GA X 13″, | 215-304 |
| 5. | TEMPERATURE SWITCH | 215-0010 |
| 6. | FAN – OIL COOLER | 215-205 |
| 7. | FUEL SENDER | 217-510 |
| 8. | 255SX HARNESS | 213-023 |
| 9. | FUSE (ATC, 25 AMP) | 211-278 |
| 10. | RELAY – SPST | 215-063 |
| 11. | MICRO RELAY (SPDT) | 217-710 |
| 12. | FUEL GUAGE | 215-133 |
| 13. | VOLT METER | 215-129 |
| 14. | HOUR METER | 215-128 |
| 15. | IGNITION SWITCH | 214-852 |
| KEY, PAIR | 214-961 | |
| SWITCH MOUNTING NUT | 214-962 | |
| ELECTRICAL DIAGRAM | ||
| 1. | IGNITION SWITCH | 214-852 |
| KEY, PAIR | 214-961 | |
| SWITCH MOUNTING NUT | 214-962 | |
| IGNITION SWITCH | 215-045 | |
| KEYS (PAIR) | 215-020 | |
| 2. | RELAY | 215-063 |
| 3. | CIRCUIT BREAKER | 215-065 |
| 4. | HOUR METER | 215-128 |
| 5. | VOLTMETER | 215-129 |
| 6. | FUEL GAUGE | 215-133 |
| 7. | TEMPERATURE SWITCH | 215-0010 |
| 8. | FAN | 215-201 |
| FAN | 215-205 | |
| 9. | BATTERY | 215-252 |
| FLG LOCKNUT (1/4-NC) | 105-832 | |
| BOLT (1/4-NC X 3/4″, GD 8) | 105-865 | |
| 10. | BATTERY CABLE (13″ LG) | 215-304 |
| 11. | BATTERY CABLE (65″ LG) | 215-313 |
| 12. | ENGINE HARNESS | 215-654 |
| ENGINE HARNESS | 215-748 | |
| 13. | WIRE (16 GA X 16-1/2″) | 215-659 |
| 14. | CONSOLE HARNESS | 217-292 |
| CONSOLE HARNESS | 215-661 | |
| 15. | 3-WIRE HARNESS | 215-662 |
| 16. | FUEL SENDER | 217-510 |
| PULL BLADES | ||
| PULL/FLOAT BLADE (5/8″ X 12′) BULLET BLADE (12′ LG X 3/8″ THK) 1-1/2′ OD BULLET | 1. 186-191 2. 186-424 | |
| BULLET BLADE (12′ LG X 3/8″ THK) 3″ OD BULLET | 186-336 | |
| SPEED BULLET BLADE (12′ LG X 3/8 ” THK) 2″ OD BULLET | 186-810 | |
| BULLET BLADE (18″ LG X 3/8″ THK) 2′ OD BULLET | 186-811 | |
| TENSION BUSHING (1.375″) | 3. 125-734 | |
| BOLT (1/2-NC X 2′ GD8) | 4. 105-871 | |
| LINK | 5. 186-248 | |
| PULL BLADE LINK CONVERSION KIT | 186-247 | |
| BUSHING | 6. 181-598 | |
| SPRING BUSHING (1.000″) | 7. 125-736 | |
| PULLING GRIP (3/8″ TO 1/2″) | 8. 185-901 | |
| PULLING GRIP (1/2″ TO 3/4″) | 185-902 | |
| PULLING GRIP (3/4″ TO 1 1/4″) | 185-903 | |
| PULLING GRIP (1 1/4″ TO 2′) | 185-904 | |
| LOCKNUT (1/2-NC) | 9. 105-065 | |
| BOLT (3/8-NC X 1 1/2′) | 10. 105-156 | |
| BOLT (3/8-NC X 2′) | 105-075 | |
| BOLT (3/8-NC X 2 1/4″) | 105-162 | |
| BOLT (3/8-NC X 3-1/2′) | 105-179 | |
| LOCKNUT (3/8-NC) | 11. 105-047 | |
| FEED BLADES | ||
| 1. | 4 TENSION BUSHING (1.375″) | 125-734 |
| 2. | 1 CA GUIDE (12″ X 3/8″ X 1-1/2 R) | 186-237 |
| 1 CA GUIDE (12″ X 3/8″ X 1-1/2 R) | 186-450 | |
| 1 CA GUIDE (12″ X 1/2″ X 1-1/2 R) | 186-773 | |
| 1 CA GUIDE (18″ X 1/2″ X 1-1/2 R) | 186-780 | |
| 3. | 1 CA GUIDE (12″ X 3/4″ X 3″ R) | 186-238 |
| 1 CA GUIDE (12″ X 3/4″ X 3″ R) | 186-457 | |
| 4. | 1 CA GUIDE (12″ X 3/4″ X 7-1/2 R) | 186-239 |
| 1 CA GUIDE (12″ X 3/4″ X 7-1/2 R) | 186-465 | |
| 1 CA GUIDE (12″ X 1″ X 10″ R) | 186-400 | |
| 1 CA GUIDE (12″ X 1″ X 10″ R) | 186-473 | |
| 5. | SPEED FEED BLADE (12″ X 1/2″ IM X | 186-804 |
| 1-1/2″ R)-INCL REF NO.’S 2 AND 10 | ||
| SPEED FEED BLADE (18″ X 1/2″ IM X | 186-805 | |
| 1-1/2″ R)-INCL REF NO.’S 2 AND 10 | ||
| 6. | FEED BLADE (12″LG, W/3/4″ IM X | 186-455 |
| 3″ R)-INCL REF NO.’S 3 AND 10 | ||
| 7. | FEED BLADE (12″LG, W/3/4″ IM X | 186-463 |
| 7-1/2″ R)-INCL REF NO.’S 4 AND 10 | ||
| FEED BLADE (12″LG, W/1″ IM X | 186-471 | |
| 10″ R)-INCL REF NO.’S 4 AND 10 | ||
| 8. | 1 BOLT (3/8-NC X 1-1/4″) | 105-052 |
| 1 BOLT (3/8-NC X 1-3/4″) | 105-286 | |
| 1 BOLT (3/8-NC X 2″) | 105-075 | |
| 9. | 1 HAND NUT (3/8-NC) | 186-187 |
| 10 | 1 HAND BOLT (3/8-NC X 1-1/4″) | 106-021 |
| 1 HAND BOLT (3/8-NC X 1-3/4″) | 106-022 | |
| 1 HAND BOLT (3/8-NC X 2″) | 106-023 | |
| 11. | 1 FEED BLADE (.75″ X .31″ X 9.5″) | 185-202 |
| 1 FEED BLADE (.75″ X .31″ X 16″) | 185-234 | |
| 12 | 1 CABLE GUIDE (.75″ X .31″ X 9.5″) | 185-206 |
| 1 CABLE GUIDE (.75″ X .31″ X 16″) | 185-233 | |
| 1 CABLE GUIDE (.75″ X .75″ X 11.5″) | 185-237 | |
| 1 CABLE GUIDE (.75″ X .75″ X 18″) | 300-8115 | |
| 13 | 1 SNAPPER PIN (3/8″ X 1-1/2″) | 110-368 |
| FLOAT BLADES | ||
| 1. | LOCKNUT (1/2-NC) | 105-065 |
| 2. | BOLT (1/2-NC X 2″, GD 8) | 105-871 |
| 3. | BUSHING (1-3/8″ ID X 1″ LG) | 125-734 |
| 4. | BUSHING (1″ ID X 3/4″ LG) | 125-736 |
| 5. | BUSHING (33/64″ ID X 7/8″ LG) | 181-598 |
| 6. | CA GUIDE (12″ X 3/8″ X 1-1/2″ R) | 186-237 |
| CA GUIDE (12″ X 3/8″ X 1-1/2″ R) | 186-450 | |
| 7. | CA GUIDE (12″ X 3/4″ X 3″ R) | 186-238 |
| CA GUIDE (12″ X 3/4″ X 3″ R) | 186-457 | |
| 8. | CA GUIDE (12″ X 3/4″ X 7-1/2″ R) | 186-239 |
| CA GUIDE (12″ X 3/4″ X 7-1/2″ R) | 186-465 | |
| CA GUIDE (12′ X 1″ X 10″ R) | 186-400 | |
| CA GUIDE (12′ X 1″ X 10″ R) | 186-473 | |
| 9. | LINK | 186-248 |
| 10. | FLOAT BLADE (12″ LG X 1″ THK) INCL. REF. NO.’S 4 | 186-192 |
| FLOAT BLADE (12″ LG X 1-1/4″ THK) | 186-395 | |
| INCL. REF. NO.’S 4 | ||
| 11. | FEED TUBE (12 X 3/8 IM X 1-1/2 R) INCL. REF NO.’S 1-2, 4-6, 9, 16 | 186-480 |
| 12 | FEED TUBE (12″ X 3/4″ IM X 3″ R) INCL REF NO. 1-2, 4-5, 7, 9, 16 | 186-485 |
| 13 | FEED TUBE (12 X 3/4 IM X 7-1/2 R) INCL REF NO. 1-2, 4-5, 8, 9, 16 | 186-490 |
| FEED TUBE (12″ X 1″ IM X 10″ R) INCL REF NO. 1-2, 4-6, 8, 16 | 186-495 | |
| 14 | BOLT (3/8-NC X 1-1/4″) | 105-052 |
| BOLT (3/8-NC X 1-3/4″) | 105-286 | |
| BOLT (3/8-NC X 2″) | 105-075 | |
| 15 | HAND NUT (3/8-NC) | 186-187 |
| 16 | HAND BOLT (3/8-NC X 1-1/4″) | 106-021 |
| HAND BOLT (3/8-NC X 1-3/4″) | 106-022 | |
| HAND BOLT (3/8-NC X 2″) | 106-023 | |
| NOT SHOWN: | DBL. DISK BLADE (.50 X 2.0 X 6.0) | |
| DBL. DISK BLADE (.50 X 2.0 X 6.0) | 185-1073 | |
| 1 | DISK ASSY. W/ CAP & BEARING | 185-1065 |
| 2 | BLADE ASSY. (DISK PLOW) | 185-1066 |
| 3 | TIRE & WHEEL ASSY. (8.25 X 2.75) | 205-1073 |
| 4 | BOLT (1/2-UNC X 8.0″ GR. 8) | 105-1177 |
| 5 | WHEEL BUSHING (.749 X .529 X 3.34″ LG.) | 125-1010 |
| 6 | WASHER (1/2″) | 105-071 |
| 7 | ROLL PIN (.750″ X 1.250″) | 105-585 |
| 8 | GUIDE COVER (DISK PLOW) | 185-1069 |
| 9 | LOCKNUT (1/2-NC) | 105-065 |
| 10 | DUST COVER | 150-1886 |
| 11 | LOCKNUT (3/4-NC) | 105-372 |
| 12 | MACH. BUSHING (3/4″ X 14 GA. NARROW RIM) | 110-1003 |
| 13 | MACHINERY BUSHING (3/4″, 18GA) | 110-095 |
| 14 | HAIR CLIP PIN (1/8″ X 1/2″) | 110-033 |
| 15 | PIN | 110-827 |
| 1 . | NUT (3/8-NC) | 105-053 |
| 2. | BOLT (3/8-NC X 2″) | 105-075 |
| 3. | ROLL PIN (1/8″ X 5/8″) | 105-535 |
| 4. | ROLL PIN (3/8″ X 1-1/2″)-USED WITH BACK REAMER AND FISHTAIL BIT | 105-519 |
| ROLL PIN (3/8″ X 1-3/4″)-USED WITH COMPACTION BIT (1-3/4 OD) | 105-539 | |
| ROLL PIN (3/8″ X 2-1/4″ )-USED WITH COMPACTION BIT (2-1/4 OD) | 105-540 | |
| 5. | COMP. SPRING (.19 OD ) -EARLY STYLE | 115-612 |
| COMP. SPRING (.27 OD ) | 115-618 | |
| 6. | SLIP LATCH PIN | 351-230 |
| 7. | SLIP LATCH PIN. USED WITH BACK REAMER AND FISHTAIL BIT | 351 -231 |
| 8. | COUPLING SEAR | 351 -234 |
| 9. | CONNECTOR SHAFT | 351-236 |
| 10. | COMPACTION BIT (1-3/4″ OD ) | 351 -239 |
| COMPACTION BIT ASSY (1-3/4″ OD) | 351-285 | |
| INCL. REF. NO. 4,7,10.21 | ||
| COMPACTION BIT (2-1/4″ OD) | 351-240 | |
| COMPACTION BIT ASSY (2-1/4″ OD) | 351-286 | |
| INCL. REF. NO. 4,7,10,21 | ||
| 1 1 . | BACK REAMER (2-7/8″ OD) | 351-242 |
| BACK REAMER ASSY (2-7/8″ OD ) | 351-287 | |
| BACK REAMER (3-1/2″ OD) | 351-243 | |
| BACK REAMER ASSY (3-1/2″ OD ) | 351-288 | |
| 12. | FISHTAIL BIT (2″ DIA) | 351-245 |
| FISHTAIL BIT ASSY | 351-289 | |
| 13. | SWIVEL ASSY | 351-246 |
| 14. | 5′ STEM SECT. INCL REF NO 3,5,8 | 351-255 |
| 10′ STEM SECT. INCL REF NO 3,5,8 | 351-256 | |
| SLIP LATCH STEM END | 351-265 | |
| HEX SLEEVE STEM END | 351 -238 | |
| 15. | STEM GUIDE | 351-257 |
| 16. | SLIP LATCH COUPLER | 351-267 |
| 17. | SLIP LATCH PIN (INCL REF # 3.5.8) | 351-266 |
| 18. | SEAR UNCOUPLING TOOL | 351 -272 |
| 19. | ADAPTER ( INCL REF NO 3,5,8 ) | 351-275 |
| 20. | ADAPTER | 351-280 |
| 21 . | TAPER CONE | 351-305 |
| TAPER CONE | 351-306 | |
| 22. | SLIP LATCH PIN (INCL REF # 3,5,8) | 351-309 |
| SLIP LATCH PIN (BLANK) | 351-307 | |
| NOT SHOWN: | ||
| SLIP LATCH REPAIR KIT | 190-137 | |
| DRILLING TOOLS – DRY BORE | ||
| 1 | LOCKNUT (1/4-NC) | 105-085 |
| 2 | BOLT (1/4-NC X 2″) | 105-106 |
| 3 | ROLL PIN (3/16″ X 1-1/4″) | 105-525 |
| 4 | 1.380″ SAND BIT | 351-143 |
| 5 | ALL THREAD (1-NC X 2-3/4″) | 351-030 |
| 6 | 1.50″ THREADED COMPACTION BIT | 351-135 |
| 1.75″ THREADED COMPACTION BIT | 351-137 | |
| 2.00″ THREADED COMPACTION BIT | 351-139 | |
| 2.25″ THREADED COMPACTION BIT | 351-141 | |
| 7 | 1.50″ SLIP-LATCH COMPACTION BIT | 351-136 |
| 1.75″ SLIP-LATCH COMPACTION BIT | 351-138 | |
| 2.00″ SLIP-LATCH COMPACTION BIT | 351-140 | |
| 2.25″ SLIP-LATCH COMPACTION BIT | 351-142 | |
| 8 | ROD SECTION (5′) | 351-095 |
| ROD SECTION (10′) | 351-096 AR | |
| TOOL JOINT | 351-009 | |
| 9 | ADAPTER (7/8-NC X 1-NC) | 351-155 |
| 10 | ADAPTER (7/8-NC X SLIP LATCH) | 351-156 |
| 11 | CONNECTOR SHAFT | 351-236 |
| SPLINE STUB | 167-035 | |
| 12 | STEM SECTION (5′) | 351-255 |
| STEM SECTION (10′) | 351-256 | |
| STEM SUB-ASS’Y | 351-265 | |
| HEX SLEEVE | 351-238 | |
| SLIP LATCH COUPLER REPAIR KIT | 190-137 | |
| DETECTION ROD | 351-154 | |
| SET SCREW (3/8-NC X…” CUP) | 105-702 | |
| STOP | 351-345 | |
| SLIM DETECTION SONDE | 220-010 | |
| 13 | DRILL STRING GUIDE ASSEMBLY | 118-097 |
| HAND HELD GUIDE ROD | 351-351 | |
| GUIDE ROD | 351-020 | |
| ROD GUIDE | 351-347 | |
| 14 | SLIP LATCH PIN W/ THREADS | 351-266 |
| 15 | SLIP LATCH COUPLER | 351-267 |
| 16 | SLIP-LATCH UNCOUPLER – ONE PIN | 351-272 |
| 17 | ADAPTER | 351-275 |
| 18 | ADAPTER | 351-355 |
| 19 | 1.5″ TWO PRONG ROCK BIT | 351-310 |
| 2″ TWO PRONG ROCK BIT | 351-311 | |
| 20 | 3″ TWO PRONG ROCK BIT | 351-312 |
| 21 | BIT BODY | 351-313 |
| 22 | BIT BODY | 351-314 |
| 23 | FROST AUGER (1.5″) | 351-331 |
| 24 | FROST AUGER (3.0″) | 351-332 |
| 25 | 1.5″ SPADE BIT | 351-337 |
| PULLING TOOLS | ||
| 1. | NUT (3/8-NC) | 105-053 |
| 2. | BOLT (3/8-NC X 2″) | 105-075 |
| 3. | WASHER (5/16″) | 105-117 |
| 4. | ROLL PIN (1/8″ X 5/8″) | 105-535 |
| 5. | STUD BOLT (7/8-NC X 2.400″} | 106-133 |
| 6. | STUD BOLT (7/8-NCX2.4″,3/8-NC) | 106-134 |
| 7. | ANCHOR SHACKLE (5/16″) | 110-289 |
| 8. | COMPRESSION SPRING (.625″) | 115-618 |
| 9. | 2.5″ REAMER | 351-147 |
| 3″ REAMER | 351-148 | |
| 3.5″ REAMER | 351-149 | |
| 4″ REAMER | 351-150 | |
| 10. | BEARING SWIVEL | 351-153 |
| 11. | SLIP LATCH PIN | 351-230 |
| 12. | COUPLING SEAR | 351-234 |
| 13. | SWIVEL | 351-246 |
| 14. | ADAPTER (7/8-NC X SLIP-LATCH) | 351-340 |
| 15. | PULLING GRIP (3/8″ TO 1/2″) | 185-901 |
| PULLING GRIP (1/2″ TO 3/4″) | 185-902 | |
| PULLING GRIP (3/4″ TO 1-1/4″) | 185-903 | |
| PULLING GRIP (1-1/4″ TO 2″) | 185-904 | |
| PULLING GRIP (2″ TO 2-3/4″) | 185-906 | |
| PULLING GRIP (2-3/4″ TO 3-1/2″) | 185-907 | |
| PULLING GRIP (3-1/2″ TO 4-1/4″) | 185-913 | |
| 16. | ADAPTER (16N) | 354-046 |
| ADAPTER (24n) | 354-047 | |
| ADAPTER (32n) | 354-048 | |
| ADAPTER (40n) | 354-049 | |
| ADAPTER (48n) | 354-050 | |
| ADAPTER (64n) | 354-051 | |
| 17. | SLIP-LATCH COUPLER REPAIR KIT | 190-137 |
Ditchwitchparts
Posted in InventoryList.