Cameron T BOP, TL BOP, UBOP, RAM BOP, ANNULAR BOP, U II RAM ASSEMBLY Parts list
| U II BOP Accessories | |||
| A high-pressure, hydraulic pump system is utilized with all Cameron U II BOPs for tensioning of the bonnet studs. | |||
| Description | Part Number | ||
| High Pressure, Hydraulic Pump Unit to Operate Hydraulic Bonnet Studs | 645035-02 | ||
| 10-Foot High Pressure Hose Assembly for Hydraulic Pump Unit | 615309-01 | ||
| 25-Foot High Pressure Hose Assembly for Hydraulic Pump Unit | 615309-02 | ||
| Male Half of Quick-Disconnect Coupling (One Required per Ram Cavity) | 708490-01 | ||
| U II BOP Part Numbers | |||
| Description | 18-3/4″ 10,000 psi | ||
| Body, Clamped | 644102-02 | ||
| Intermediate Flanqe | 615303-01 | ||
| Bonnet | 615302-01 | ||
| Bonnet | — | ||
| Piston, Operating | 615304-01 | ||
| Piston, Operating (Super Trim) | — | ||
| Piston, Ram Change Open | 614618-02 | ||
| Piston, Ram Change Close | 614618-01 | ||
| Cylinder, Ram Change | 030273-16 | ||
| Stud, Bonnet | 644612-18-10 | ||
| Piston, Bonnet Stud | 615453-18-10 | ||
| Seal, Bonnet Stud | 615452-18-10 | ||
| Nut, Bonnet Stud | 644018-18-10 | ||
| Pin, Ram Guide | 030313-11 | ||
| Lantern Ring | 615332-02 | ||
| Ring Retainer, Backup Ring | 614672-05 | ||
| Ring, Backup | 610108-15 | ||
| Seal Ring, Connecting Rod | 710671 | ||
| Retainer Plate | 615210-01 | ||
| Retainer Ring | 041008-08-00-52 | ||
| Bonnet, Seal | 644169-01-00-01 | ||
| Connector, Tubing | 707276 | ||
| Quick Disconnect, Male | 708490-01 | ||
| Protective Cover | 615627-01 | ||
| Cap Screw | 702500-16-00-10 | ||
| Screw, Plastic Packing | 005940-09 | ||
| Pipe Plug, Plastic Packing | 005930-05-10 | ||
| Check Valve, Plastic Packing | M517988 | ||
| Cap Screw, Intermediate Flange to Bonnet | 702585-36-00-93 | ||
| Ring, Seal Secondary Connecting Rod | 710670 | ||
| Stud, Wedgelock | 044854-12 | ||
| Nut, Wedgelock | 2709000-20-09 | ||
| Retainer Ring, Tail Rod | 033186-47 | ||
| Seal Ring, Tail Rod | 707232 | ||
| Wear Ring, Ram Change Piston Head | 614742-03 | ||
| O-Ring, Ram Change to Piston Body | 702645-34-31 | ||
| O-Ring, Ram Change Cylinder to Body | 702645-44-21 | ||
| O-Ring, Ram Change Cylinder to Int. Flange | 702645-44-01 | ||
| Bearing Gland, Intermediate Flange | 615727-01 | ||
| Seal Ring, Ram Change Piston Rod to Int. Flg. | 707233 | ||
| Connector, Tubing | 707159 | ||
| Retainer Ring, Lip Seal Tailrod | 614672-04 | ||
| Gland, Bleeder | 017454-08 | ||
| Plug, Bleeder | 017454-09 | ||
| Lifting Eye | 11849 | ||
| Seal Ring, Ram Change Piston Head | 707231 | ||
| Wear Ring, Operating Piston | 049223-16 | ||
| Wear Ring, Operating Piston | — | ||
| Lip Seal, Operating Piston | 710545 | ||
| Lip Seal, Operating Piston | — | ||
| O-Ring | 2708812-02 | ||
| Cylinder, Operating | 030274-15 | ||
| Cylinder, Operating | — | ||
| Bearing Retainer Ring, Seal | 614348-10 | ||
| Plastic Packing | 007650-25 | ||
| Ring, Seal Operating Piston | 710640 | ||
| Ring, Backup | 610108-28 | ||
| Check Valve, Weep Hole | 709493 | ||
| Wedgelock w/Pressure Balance Chamber (RH) | 615402-01 | ||
| Wedgelock w/Pressure Balance Chamber (LH) | 615402-02 | ||
| O-Ring (Not Shown) | — | ||
| Description | 18-3/4″ 15,000 psi | ||
| Body, Clamped | 615239-03 | ||
| Intermediate Flanqe | 614722-03 | ||
| Bonnet | — | ||
| Bonnet | 614621-01 | ||
| Piston, Operating | 614623-01 | ||
| Piston, Operating (Super Trim) | 614623-05+ | ||
| Piston, Ram Change Open | 614618-02 | ||
| Piston, Ram Change Close | 614618-01 | ||
| Cylinder, Ram Change | 030273-16 | ||
| Stud, Bonnet | 644612-18-15 | ||
| Piston, Bonnet Stud | 615453-18-15 | ||
| Seal, Bonnet Stud | 615452-18-15 | ||
| Nut, Bonnet Stud | 615451-18-15 | ||
| Pin, Ram Guide | 030313-11 | ||
| Lantern Ring | 615332-02 | ||
| Ring Retainer, Backup Ring | 614672-05 | ||
| Ring, Backup | 610108-15 | ||
| Seal Ring, Connecting Rod | 710671 | ||
| Retainer Plate | 615210-01 | ||
| Retainer Ring | 041008-08-00-52 | ||
| Bonnet, Seal | 644169-01-00-01 | ||
| Connector, Tubing | 707276 | ||
| Quick Disconnect, Male | 708490-01 | ||
| Protective Cover | 615627-01 | ||
| Cap Screw | 702500-16-00-10 | ||
| Screw, Plastic Packing | 005940-09 | ||
| Pipe Plug, Plastic Packing | 005930-05-10 | ||
| Check Valve, Plastic Packing | M517988 | ||
| Cap Screw, Intermediate Flange to Bonnet | 702585-36-00-93 | ||
| Ring, Seal Secondary Connecting Rod | 710670 | ||
| Stud, Wedgelock | 044854-12 | ||
| Nut, Wedgelock | 2709000-20-09 | ||
| Retainer Ring, Tail Rod | 033186-47 | ||
| Seal Ring, Tail Rod | 707232 | ||
| Wear Ring, Ram Change Piston Head | 614742-03 | ||
| O-Ring, Ram Change to Piston Body | 702640-34-31 | ||
| O-Ring, Ram Change Cylinder to Body | 702640-44-21 | ||
| O-Ring, Ram Change Cylinder to Int. Flange | 702640-44-01 | ||
| Bearing Gland, Intermediate Flange | 615727-01 | ||
| Seal Ring, Ram Change Piston Rod to Int. Flg. | 707233 | ||
| Connector, Tubing | 707159 | ||
| Retainer Ring, Lip Seal Tailrod | 614672-04 | ||
| Gland, Bleeder | 017454-08 | ||
| Plug, Bleeder | 017454-09 | ||
| Lifting Eye | 11849 | ||
| Seal Ring, Ram Change Piston Head | 707231 | ||
| Wear Ring, Operating Piston | 049223-18 | ||
| Wear Ring, Operating Piston | 049233-19+ | ||
| Lip Seal, Operating Piston | 710546 | ||
| Lip Seal, Operating Piston | 710851+ | ||
| O-Ring | 702645-47-11 | ||
| Cylinder, Operating | — | ||
| Cylinder, Operating | 644613-01+ | ||
| Bearing Retainer Ring, Seal | 614348-10 | ||
| Plastic Packing | 007650-25 | ||
| Ring, Seal Operating Piston | 710640 | ||
| Ring, Backup | 610108-28 | ||
| Check Valve, Weep Hole | 709493 | ||
| Wedgelock w/Pressure Balance Chamber (RH) | 615402-01 | ||
| Wedgelock w/Pressure Balance Chamber (LH) | 615402-02 | ||
| O-Ring (Not Shown) | 702645-46-91+ | ||
| U II BOP Pipe Ram Part Numbers | |||
| 18-3/4” 10,000 and 15,000 psi U II Top Seal: 645282-01-00-01 | |||
| Pipe Size | Assembly | Ram | Packer |
| Blind | 644248-01 | 615407-01 | 644247-01-00-01 |
| 2.375″ | 644248-02 | 614770-01 | 644247-02-00-01 |
| 2.875″ | 644248-03 | 614770-02 | 644247-03-00-01 |
| 3.500″ | 644248-04 | 644742-01 | 644247-04-00-01 |
| 3.500″ Aluminum | 644248-05 | 614770-04 | 644247-05-00-01 |
| 4.000″ | 644248-06 | 614770-05 | 644247-06 |
| 4.500″ | 644248-07 | 644742-02 | 644247-07 |
| 4.500″ Aluminum | 644248-08 | 614770-07 | 644247-08 |
| 4.750″ | 644248-09 | 614770-08 | 644247-09 |
| 5.000″ | 644248-10 | 644742-03 | 644247-10-00-01 |
| 5.500″ | 6445248-11 | 614770-10 | 644247-11-00-01 |
| 5.875″ | 644248-23 | 614770-23 | 644247-23-00-01 |
| 6.000″ | 644248-12 | 614770-12 | 644247-12-00-01 |
| 6.625″ | 644248-13 | 614770-13 | 644247-13 |
| 7.000″ | 644248-14 | 614770-14 | 644247-14 |
| 7.625″ | 644248-15 | 614770-15 | 644247-15-00-01 |
| 8.625″ | 644248-16 | 614770-16 | 644247-16-00-01 |
| 9.000″ | 644248-17 | 614770-17 | 644247-17-00-01 |
| 9.625″ | 644248-18 | 614770-18 | 644247-18-00-01 |
| 10.750″ | 644248-19 | 614770-19 | 644247-19-00-01 |
| 13.375″ | 644248-21 | 614770-21 | 644247-21-00-01 |
| U II BOP Variable Bore Ram Part Numbers | |||
| BOP Size and Working Pressure | Pipe Size Range | Assembly | |
| 18-3/4″ 10,000 psi | 7.625″ to 3.500″ | 614879-01 | |
| 18-3/4″ 10,000 psi | 5.000″ to 2.875″ | 614878-01 | |
| 18-3/4″ 15,000 psi | 7.625″ to 5.000″ | 614879-01 | |
| 18-3/4″ 15,000 psi | 5.000″ to 3.500″ | 614878-01 | |
| BOP Size and Working Pressure | Pipe Size Range | Ram Body | |
| 18-3/4″ 10,000 psi | 7.625″ to 3.500″ | 614846-01 | |
| 18-3/4″ 10,000 psi | 5.000″ to 2.875″ | 644748-01 | |
| 18-3/4″ 15,000 psi | 7.625″ to 5.000″ | 614846-01 | |
| 18-3/4″ 15,000 psi | 5.000″ to 3.500″ | 614748-01 | |
| BOP Size and Working Pressure | Pipe Size Range | Packer | |
| 18-3/4″ 10,000 psi | 7.625″ to 3.500″ | 644918-01-00-01 | |
| 18-3/4″ 10,000 psi | 5.000″ to 2.875″ | 644919-01-00-01 | |
| 18-3/4″ 15,000 psi | 7.625″ to 5.000″ | 644918-01-00-01 | |
| 18-3/4″ 15,000 psi | 5.000″ to 3.500″ | 644919-01-00-01 | |
| BOP Size and Working Pressure | Pipe Size Range | Top Seal | |
| 18-3/4″ 10,000 psi | 7.625″ to 3.500″ | 645282-01-00-01 | |
| 18-3/4″ 10,000 psi | 5.000″ to 2.875″ | 644246-02-00-01 | |
| 18-3/4″ 15,000 psi | 7.625″ to 5.000″ | 645282-01-00-01 | |
| 18-3/4″ 15,000 psi | 5.000″ to 3.500″ | 644246-02-00-01 | |
| Bonnet Seal and Connecting Rod Seal Part Numbers | |||
| Temperature Range | Bonnet Seal | Connecting Rod Seal | |
| Normal (Up to 250oF) | 644169-01-00-01 | 710671 | |
| High (Up to 350oF) | 644169-03 | 711871 | |
| U II BOP Shearing Blind Ram Assemblies | |||
| Item | Description | 18-3/4″ 10,000 and 15,000 psi | |
| 1 | Upper Ram Subassembly | 644759-03 | |
| 2 | Ram | 644752-01-00-01 | |
| 3 | Blade Packer | 046910-05-00-01 | |
| 4 | Side Packer | 615567-01-00-01 | |
| 5 | Side Packer | 615568-01-00-01 | |
| 6 | Top Seal | 645282-01-00-01 | |
| 7 | Blade Insert | 644519-03 | |
| 8 | Cap Screw | 644524-01 | |
| 9 | Lower Ram Subassembly | 644759-04 | |
| 10 | Ram | 644752-02-00-01 | |
| 11 | Side Packer | 615567-01-00-01 | |
| 12 | Side Packer | 615568-01-00-01 | |
| 13 | Top Seal | 645282-01-00-01 | |
| 14 | Blade Insert | 644519-02 | |
| 15 | Spirol Pin | 200231 | |
| U II BOP Shearing Blind Ram Assemblies | |||
| Item | Description | 18-3/4″ 10,000 and 15,000 psi | |
| 1 | Upper Ram Assembly | 2010214-01-01 | |
| 2 | Ram | 2010216-01-01 | |
| 3 | Blade Packer | 046910-05-00-01 | |
| 4 | Side Packer | 615567-01-00-01 | |
| 5 | Side Packer | 615568-01-00-01 | |
| 6 | Top Seal | 645282-01-00-01 | |
| * | Wear Pad | 2011276-01 | |
| * | Wear Pad | 2011276-02 | |
| * | Screw | 644349-01 | |
| 7 | Lower Ram Assembly | 2010215-01-01 | |
| 8 | Ram | 2010217-01-01 | |
| 9 | Side Packer | 615567-01-00-01 | |
| 10 | Side Packer | 615568-01-00-01 | |
| 11 | Top Seal | 645282-01-00-01 | |
| * | Wear Pad | 2011276-01 | |
| * | Wear Pad | 2011276-02 | |
| * | Screw | 644349-01 | |
| CAMRAM High Temp Shearing Blind Ram Blade and Side Packers | |||
| Description | 18-3/4″ 10,000 and 15,000 psi | ||
| Blade Packer, Hiqh Temperature | 644904-01 | ||
| Left Side Packer, Hiqh Temperature | 644905-01 | ||
| Riqht Side Packer, Hiqh Temperature | 644905-02 | ||
| Top Seal, Hiqh Temperature | 645246-01 | ||
| U II CAMRAM 350 Part Numbers | |||
| Pipe | 18-3/4″ 10,000 and 15,000 psi p Seal 645246-01 | ||
| Size | Description | Part Number | |
| Blind | Packer | 644714-01 | |
| 2.375″ | Packer | 644714-02 | |
| 2.875″ | Packer | 644714-03 | |
| 3.500″ | Packer | 644714-04 | |
| 5.000″ | Packer | 644714-10 | |
| 5.500″ | Packer | 644714-11 | |
| 6.625″ | Packer | 644714-13 | |
| T BOP Accessories A high-pressure, hydraulic pump system is utilized with all Cameron T BOPs for tensioning of the bonnet studs | |||
| Description | Part Number | ||
| Hiqh Pressure, Hydraulic Pump Unit to Operate Hydraulic Bonnet Studs | 645035-02 | ||
| 10-Foot High-Pressure Hose Assembly for Hydraulic Pump Unit | 615309-01 | ||
| 25-Foot High-Pressure Hose Assembly for Hydraulic Pump Unit | 615309-02 | ||
| Male Half of Quick-Disconnect Coupling (One Required per Ram Cavity) | 708490-01 | ||
| 13-5/8” 10,000 psi WP T BOP Component List and Part Numbers | |||
| Item | Description | Part Number | |
| 1 | Body (Typical) | 644765-01 | |
| 2* | Plug | 201026 | |
| 3 | TX Bonnet Gasket | 644799-01 | |
| 4 | Screw, 12 Pt Cap | 702585-14-00-10 | |
| 5 | Bonnet Stud | 644652-01 | |
| 6 | Bearing Retainer | 644653-01 | |
| 7 | Split Bearing | 644654-01 | |
| 8 | Wear Ring | 614742-10 | |
| 9 | Bonnet Subassembly, Right Hand | 644797-01 | |
| 10 | Bonnet Subassembly, Left Hand | 644797-02 | |
| 11 | Nut Subassembly | 644616-02 | |
| 12 | Collar Subassembly | 644789-01 | |
| 13 | O-Ring | 702645-32-31 | |
| 14* | Pipe Plug | K201024 | |
| 15* | Pipe Plug | 675029-49 | |
| 16 | Ram Guide Pin | 644658-01 | |
| 13-5/8” 10,000 psi WP T BOP Bonnet Subassembly Parts List | |||
| Item | Description | Part Number | |
| 30 | Bonnet | 644630-01 | |
| 31 | Liner, Operating Cylinder | 644631-01 | |
| 32 | O-Ring | 644768-02 | |
| 33 | Operating Piston Subassembly | 644791-01 | |
| 34 | Seal Ring | 710410 | |
| 35 | Wear Ring | 614742-08 | |
| 36 | Ram Change Piston, Open | 644637-01 | |
| 37 | Ram Change Piston, Closed | 644637-02 | |
| 38 | Seal Ring | 710505 | |
| 39 | Wear Ring | 614742-09 | |
| 40 | Cylinder, Ram Change System | 644640-01 | |
| 41 | O-Ring, Size 336 | 702645-33-61 | |
| 42 | Gland, Ram Change System | 644641-01 | |
| 43 | Backup Ring | 644381-06 | |
| 44 | Seal Ring | 710504 | |
| 45 | O-Ring, Size 341 | 702645-34-11 | |
| 46 | Seal Retainer, Ram Change System | 644642-01 | |
| 47 | Cylinder Head, Ram Change System | 644643-01 | |
| 48 | O-Ring, Size 338 | 702645-33-81 | |
| 49 | Insert, Bonnet Gasket | 644644-01 | |
| 50 | Screw, 12 Pt Cap | 702585-14-00-26 | |
| 51 | Backup Ring | 644381-05 | |
| 52 | Seal Ring | 710430 | |
| 53 | Seal Carrier | 644726-01 | |
| 54 | O-Ring, Size 352 | 702645-35-21 | |
| 55 | Seal Ring | 609745-14 | |
| 56 | Backup Ring | 644381-04 | |
| 57 | Seal Ring | 710429 | |
| 58 | Retainer Ring | 644648-01 | |
| 59 | Retaining Ring, Spirolox | 018572-18 | |
| 60 | O-Ring, Size 360 | 702645-36-01 | |
| 61 | Screw, 12 Pt Cap | 702585-06-00-30 | |
| 62 | Backup Ring | 644771-01 | |
| 63 | Seal Ring | 710369 | |
| 64 | Retainer Ring | 644737-01 | |
| 65 | Retaining Ring, Spirolox | 708393 | |
| 66 | Locking Screw Housing | 644734-01 | |
| 67 | Locking Screw | 644733-01 | |
| 68 | O-Ring, Size 459 | 702645-45-91 | |
| 69 | Stud, Double Ended | 644450-03 | |
| 70 | Nut | 644792-01 | |
| 71 | Button | 644635-01 | |
| 72 | Inner Seal, Hydraulic Bonnet Stud Piston | 644651-01 | |
| 73 | Inner Seal, Hydraulic Bonnet Nut | 644438-02 | |
| 74 | Outer Seal, Hydraulic Bonnet Nut | 644439-02 | |
| 75 | Spacer Ring, Hydraulic Bonnet Stud | 644650-01 | |
| 76 | O-Ring, Size 362 | 702645-36-22 | |
| 77 | Retaining Ring, Spirolox | 033186-05 | |
| 78 | Gland | 017454-46 | |
| 79 | Blind Plug | 017454-36 | |
| 80* | Check Valve | 709493 | |
| 81* | Bleeder Plug Assembly | 640202-02 | |
| 82* | High Pressure Plug | 615684-02 | |
| 83* | O-Ring, Size 113 | 702645-11-31 | |
| 84 | Tubing Connector | 707276 | |
| 85 | Male Quick-Disconnect | 708490-01 | |
| 18-3/4” 15,000 psi WP T BOP Part Numbers | |||
| Item | Description | Part Number | |
| 1 | Body (Typical) | 644622-01 | |
| 2 | Plug | 201026 | |
| 3 | TX Bonnet Gasket Kit | 644770-02 | |
| 4 | Screw, 12 Pt Cap | 702585-14-00-10 | |
| 5 | Bonnet Stud | 644362-03 | |
| 6 | Bearing Retainer | 644361-01 | |
| 7 | Split Bearing | 644360-01 | |
| 8 | Wear Ring | 645363-01 | |
| 9 | Bonnet Subassembly, Right Hand | 644562-05 | |
| 10 | Bonnet Subassembly, Left Hand | 644562-06 | |
| 11 | Nut Subassembly | 644616-04 | |
| 12 | Collar | 615707-03 | |
| 13 | O-Ring | 702645-32-61 | |
| 16 | Ram Guide Pin | 644399-01 | |
| 17 | Retaining Ring, Spirolox | 711202 | |
| 18-3/4” 15,000 psi WP T BOP Bonnet Subassembly Part Numbers | |||
| Item | Description | Part Number | |
| 30 | Bonnet | 644414-03 | |
| 31 | Liner, Operating Cylinder | 644470-01 | |
| 32 | O-Ring, Size 387 | 702645-38-71 | |
| 33 | Operating Piston Subassembly | 644483-04 | |
| 34 | Seal Ring | 709635 | |
| 35 | Wear Ring | 614742-06 | |
| 36 | Ram Change Piston, Open | 644301-01 | |
| 37 | Ram Change Piston, Close | 644301-02 | |
| 38 | Seal Ring | 709632 | |
| 39 | Wear Ring | 614742-05 | |
| 40 | Cylinder, Ram Change System | 615685-01 | |
| 41 | O-Ring, Size 348 | 702645-34-81 | |
| 42 | Gland, Ram Change System | 615711-01 | |
| 43 | Backup Ring | 644381-03 | |
| 44 | Seal Ring | 709633 | |
| 45 | O-Ring, Size 428 | 702645-42-81 | |
| 46 | Seal Retainer, Ram Change System | 615712-01 | |
| 47 | Cylinder Head, Ram Change System | 615713-01 | |
| 48 | O-Ring, Size 425 | 702645-42-51 | |
| 49 | Insert, Bonnet Gasket | 644358-03 | |
| 50 | Screw, 12 Pt Cap | 702585-14-00-20 | |
| 51 | Backup Ring | 644381-02 | |
| 52 | Seal Ring | 709631 | |
| 53 | Wear Ring | 644443-01 | |
| 54 | Backup Ring | 644381-01 | |
| 55 | Seal Ring | 709630 | |
| 56 | Spacer Ring, Connecting Rod | 644355-01 | |
| 57 | Ret. Ring, Primary Conn. Rod Seal | 644356-01 | |
| 58 | Retaining Ring, Spirolox | 709503 | |
| 59 | O-Ring, Size 453 | 702645-45-31 | |
| 60 | Seal Sub, Blind | 644491-02 | |
| 61 | O-Ring, Size 214 | 702645-21-41 | |
| 62 | Screw 12 Pt Cap | 702585-06-00-42 | |
| 63 | Stud, Double Ended | 644450-01 | |
| 64 | Cap Nut | 644447-01 | |
| 65 | ST-Lock Assembly | 645021-01 | |
| 69 | Gland, Tubing | 017454-46 | |
| 70 | Blind Plug | 017454-36 | |
| 71* | Valve, Check | 709493 | |
| 73 | High Pressure Plug | 615684-02 | |
| 74 | O-Ring, Size 113 | 702645-11-31 | |
| 75 | Connector, Tubing | 707276 | |
| 76 | Male Quick-Disconnect | 708490-01 | |
| 77 | Button | 615706-01 | |
| 78 | Inner Seal, Hydraulic Bonnet Nut | 644438-01 | |
| 79 | Spacer Ring, Hydraulic Bonnet Stud | 644359-01 | |
| 80 | Outer Seal, Hydraulic Bonnet Nut | 644439-01 | |
| 81 | Piston, Hydraulic Bonnet Stud | 615709-01 | |
| 82 | O-Ring, Size 377 | 702645-37-71 | |
| 83 | Retaining Ring, Spirolox | 709636 | |
| High Temperature Connecting Rod Seal Part Numbers | |||
| Item | Description | Part Number | |
| 52 | Connecting Rod Seal | 712021 | |
| 55 | Connecting Rod Seal | 712022 | |
| TL BOP Assembly Components | |||
| Item | Description | ||
| 1 | Body | ||
| **2 | Bonnet Stud (Tandem Booster uses different arrangement – See TB Bonnet) | ||
| 3 | Bonnet Cap Nut | ||
| 4 | Ram Guide Pin | ||
| 5 | Bonnet Seal Carrier | ||
| *6 | Bonnet Seal | ||
| *7 | Retainer Ring (Seal Carrier) | ||
| 8 | Pipe Plug, Threaded Hex Socket – N/A for MLS | ||
| *9 | Seal Ring | ||
| 10 | Bonnet Subassembly, Right Hand | ||
| 11 | Bonnet Subassembly, Left Hand | ||
| 12 | Name Plate | ||
| 13 | Name Plate | ||
| 14 | Stud, Double Ended | ||
| 15 | Nut, Heavy Hex | ||
| 16 | Bushing (Not Shown) | ||
| 17 | Adhesive Primer, 4.50 oz. (Not Shown) | ||
| 18 | Adhesive, Loctite 277 (Not Shown) | ||
| 19 | Stud, Double Ended | ||
| 20 | Nut, Heavy Hex | ||
| Accessory Items | |||
| Removal Tool, Bonnet Seal Carrier | |||
| Ram Tray Assembly | |||
| Bonnet Extension Rod – N/A for tandem Booster | |||
| Expendable Items | |||
| Gasket Subassembly, AX | |||
| Gasket Subassembly, CX-18 | |||
| Paste, #503 Molybdenum Disulfide 4.0 lb. Can | |||
| Adhesive, Loctite 242, 250 ml. Tube | |||
| Sealant, Thread-Loctite 567, 50 ml. Tube | |||
| Ram Lube, Chemola | |||
| Fluid, Hydraulic Equipment Preservation | |||
| TL BOP RamLock Bonnet Subassembly Components | |||
| Item | Description | ||
| 2 | Bonnet | ||
| 3 | Operating Piston with RamLock Subassembly (See Page 90 for Exploded View) | ||
| 4 | Ram Change Piston (Open) | ||
| 5 | Ram Change Piston (Close) | ||
| 6 | Ram Change Cylinder | ||
| 7 | Ram Change Access Cap | ||
| *8 | O-Ring | ||
| *9 | Back-Up Ring | ||
| *11 | Retaining Ring, Spirolox (Connecting Rod) | ||
| *12 | Retainer Ring (Primary Connecting Rod) | ||
| *13 | Back-Up Ring (Connecting Rod) | ||
| *14 | Seal Ring (Primary Connecting Rod Seal) | ||
| *15 | Ring Spacer (Connecting Rod) | ||
| *16 | Seal Ring (Secondary Connecting Rod Seal) | ||
| *17 | Back-Up Ring (Connecting Rod) | ||
| *18 | Retainer Ring (Primary Connecting Rod) | ||
| *19 | Retaining Ring, Spirolox (Connecting Rod) | ||
| *20 | Wear Ring | ||
| 23 | Operating Piston Cylinder | ||
| 24 | Hydraulic RamLock Cylinder Head | ||
| 25 | Double-Ended Stud (Cylinder Head-to-Bonnet) | ||
| 26 | Cap Nut | ||
| *27 | Seal Ring (Operating Piston Seal) | ||
| *28 | O-Ring (Operating Cylinder and End Cap) | ||
| *29 | Wear Ring (Operating Piston) | ||
| *30 | Wear Ring (Ram Change Piston) | ||
| *31 | O-Ring (Ram Change Cylinder) | ||
| *32 | Seal Ring (Ram Change Piston) | ||
| *33 | Seal Ring (Ram Change Piston) | ||
| *34 | O-Ring (Ram Change Access Cap) | ||
| 35 | Lifting Eye | ||
| 36 | Tubing Gland (Bonnet and Cylinder Head) | ||
| 37 | Blind Plug (Bonnet and Cylinder Head) | ||
| 38 | Check Valve | ||
| 39 | Pipe Plug (2 Bonnet, 2 Cylinder Head, 1 Cap, 1 Lower Bonnet Drain Plug) | ||
| *40 | Seal Ring (Cylinder Head) | ||
| *41 | Hydraulic RamLock Seal Sleeve (Cylinder Head) | ||
| 42 | Seal Retainer for Lock Cylinder (Cylinder Head) | ||
| **43-46 | Hydraulic Plumbing | ||
| 47 | Socket Head Cap Screw | ||
| 48 | Hydraulic RamLock End Cap (Cylinder Head) | ||
| *50 | Bonnet Flange Bearing/Wear Ring | ||
| 51 | Blind Flange (Cylinder Head) | ||
| *52 | O-Ring (End Cap) | ||
| ****52A | Sequence Valve | ||
| **53 | Thread Sealant | ||
| ****54A | Subassembly, Blanking Plug, Top & Bottom, f/Sequence Valve F VBR & Shear Rams | ||
| TL BOP RamLock Operating Piston Subassembly 18-3/4” 5000 and 10,000 psi WP | |||
| Item | Description | ||
| 1 | Secondary Piston | ||
| *2 | Seal Ring | ||
| 3 | Whistle Piston | ||
| 4 | Sealing Shoulder Screw | ||
| *5 | O-Ring | ||
| 6 | Main Piston | ||
| 7 | Lock Component (Main Piston with Keys and Screws) | ||
| 8 | Alignment Key (Main Piston) | ||
| *9 | Socket Head Cap Screw | ||
| 10 | Piston Front Plate | ||
| *11 | O-Ring (Front Plate) | ||
| 12 | Socket Head Cap Screw (Front Plate-to-Main Piston) | ||
| 13 | Rod Connection | ||
| (*)**14 | Adhesive (Loctite 242 50cc Bottle) | ||
| *15 | Socket Head Set Screw (Half Dog Rod-to-Front Plate) Optional | ||
| 16 | Button for Operating Piston (Connecting Rod) | ||
| 17 | Pipe-Threaded Hex Socket Plug (Front Plate) | ||
| 18 | Front Plate Stinger | ||
| *19 | Seal Ring (Three-Function Stinger) | ||
| *21 | Pip Ring | ||
| **22 | Thread Sealant | ||
| 25 | Sleeve, Secondary Piston, Hydraulic Ram (Inside Item 6) | ||
| *26 | Wear Ring (for Secondary Piston Sleeve) | ||
| 27 | Stop Plate, Secondary Piston (Inside Item 6) | ||
| 28 | Screw, Socket Head Cap | ||
| *29 | Pip Ring (Secondary Piston) | ||
| *30 | Seal Ring (Secondary Piston) | ||
| TL BOP RamLock Operating Piston Subassembly 18-3/4” 15,000 psi WP | |||
| Item | Description | ||
| 1 | Secondary Piston | ||
| *2 | Polypak | ||
| 3 | Whistle Piston | ||
| 4 | Sealing Shoulder Screw | ||
| *5 | O-Ring | ||
| 6 | Main Piston | ||
| 7 | Lock Component (Main Piston with Keys and Screws) | ||
| 8 | Alignment Key (Main Piston) | ||
| *9 | Socket Head Cap Screw | ||
| 10 | Piston Front Plate | ||
| *11 | O-Ring (Front Plate) | ||
| 12 | Socket Head Cap Screw (Front Plate-to-Main Piston) | ||
| 13 | Front Plate Connecting Rod | ||
| (*)**14 | Adhesive (Loctite 242 50 cc Bottle) | ||
| *15 | Socket Head Set Screw (Half Dog Rod-to-Front Plate) Optional | ||
| 16 | Button for Operating Piston (Connecting Rod) | ||
| 17 | Pipe-Threaded Hex Socket Plug (Front Plate) | ||
| 18 | Front Plate Stinger | ||
| *19 | Seal Ring (Three-Function Stinger) | ||
| 21 | Blanking Plug | ||
| **22 | Thread Sealant | ||
| TL BOP ST-Lock Bonnet Subassembly Components | |||
| Item | Description | ||
| 1 | Bonnet | ||
| 2 | Operating Piston Subassembly | ||
| 3 | Ram Change Piston (Open) | ||
| 4 | Ram Change Piston (Close) | ||
| 5 | Ram Change Cylinder | ||
| 6 | Ram Change Access Cap | ||
| 7 | Hydraulic Bonnet Sub (Cylinder Head) | ||
| 8 | O-Ring | ||
| *9 | Retaining Ring, Spirolox (Connecting Rod) | ||
| *10 | Retainer Ring (Primary Connecting Rod) | ||
| *11 | Back-Up Ring (Connecting Rod) | ||
| *12 | Seal Ring (Primary Connecting Rod Seal) | ||
| *13 | Ring Spacer (Connecting Rod) | ||
| *14 | Seal Ring (Secondary Connecting Rod Seal) | ||
| *15 | Back-Up Ring (Connecting Rod) | ||
| *16 | Retainer Ring (Primary Connecting Rod) | ||
| *17 | Retaining Ring, Spirolox (Connecting Rod) | ||
| *18 | Wear Ring (for 15K only) | ||
| 19 | Operating Piston Cylinder | ||
| 20 | Cylinder Head, Right Hand | ||
| 20A | Cylinder Head, Left Hand | ||
| 21 | Double-Ended Stud | ||
| 22 | Heavy Hex Nut | ||
| *23 | Seal Ring (Tail Rod) | ||
| *24 | Back-Up Ring (Tail Rod) | ||
| *25 | Retaining Ring, Spirolox (Tail Rod) | ||
| *26 | Seal Ring | ||
| *27 | O-Ring (Operating Piston) | ||
| *28 | Wear Ring | ||
| *29 | Wear Ring (Ram Change Piston) | ||
| *30 | O-Ring (Ram Change Cylinder) | ||
| *31 | Seal Ring (Ram Change Piston Seal) | ||
| *32 | Seal Ring (Ram Change Piston Seal) | ||
| *33 | O-Ring (Ram Change Access Cap) | ||
| 34 | Lifting Eye | ||
| 35 | Tubing Gland | ||
| 36 | Blind Plug | ||
| *37 | Back-Up Ring (Connecting Rod) (for 15K only) | ||
| 38 | ST Lock Assembly | ||
| 39 | Sequencing Valve Assembly | ||
| 40 | Check Valve | ||
| 41 | 12 Point Cap Screw | ||
| 42 | Threaded Pipe Plug (Not Shown) | ||
| 43 | Threaded Pipe Plug (Not Shown) | ||
| *44 | O-Ring | ||
| *45 | Back-Up Ring | ||
| 46 | Bearing, Bonnet Flange | ||
| Piping, ST-Lock w/Sequence Valve | |||
| Optional Items | |||
| Operating Piston Subassembly w/Removable Tail Rod | |||
| Seal Repair Kit | |||
| Expendable Items | |||
| Paste, #503 Molybdenum Disulfide | |||
| Thread Sealant | |||
| ST-Lock Assembly Components | |||
| Item | Description | ||
| 1 | Stem and Locking Wedge Assembly | ||
| 2 | Locking Cylinder | ||
| 3 | Brake Hub | ||
| 4 | Brake Ring with Dowel Pins | ||
| 5 | Unlock Piston | ||
| 6 | Spring | ||
| *7 | O-Ring | ||
| 8 | Alignment Key Assembly | ||
| 9 | End Cap | ||
| *10 | O-Ring | ||
| *12 | O-Ring | ||
| 14 | End Cap (Brake Piston End) | ||
| 15 | Socket Head Cap Screw | ||
| *16 | O-Ring | ||
| *17 | O-Ring | ||
| *18 | O-Ring | ||
| *20 | Bearing | ||
| 22 | Bearing Subassembly | ||
| 26 | Overhauling Nut | ||
| *27 | Seal Ring | ||
| 28 | Sequence Cap Head | ||
| 29 | Sequence Cap Body | ||
| 30 | Sequence Cap Valve Poppet | ||
| 31 | Sequence Cap Seat | ||
| 32 | Spring | ||
| *33 | O-Ring | ||
| *34 | O-Ring | ||
| *35 | O-Ring | ||
| *36 | O-Ring | ||
| 37 | 12 Point Cap Screw | ||
| Sequencing Valve Subassembly Components | |||
| Item | Description | ||
| 1 | Poppet | ||
| 2 | Compression Spring | ||
| 3 | Valve Seat | ||
| 4 | Actuator | ||
| *5 | O-Ring | ||
| *6 | O-Ring | ||
| 7 | Liner | ||
| *8 | O-Ring | ||
| 9 | Compression Spring | ||
| 10 | Cap | ||
| 11 | Hex Head Cap Screw | ||
| 12 | Body | ||
| *13 | O-Ring | ||
| 14 | Balance Piston | ||
| 15 | Poppet Stop | ||
| *16 | O-Ring | ||
| *17 | O-Ring | ||
| *24 | O-Ring | ||
| ** | Sealant/Lubricant | ||
| Sequencing Valve Subassembly Components | |||
| 1 1 Poppet | |||
| 2 1 Compression Spring | |||
| 3 1 Valve Seat | |||
| 4 1 Actuator | |||
| *5 1 O-Ring | |||
| *6 1 O-Ring | |||
| 7 1 Liner | |||
| *8 2 O-Ring | |||
| 9 1 Compression Spring | |||
| 10 1 Cap | |||
| 11 4 Hex Head Cap Screw | |||
| 12 1 Body | |||
| *13 1 O-Ring | |||
| 14 1 Balance Piston | |||
| 15 1 Poppet Stop | |||
| *16 1 O-Ring | |||
| *17 1 O-Ring | |||
| *24 1 O-Ring | |||
| ** 1 Sealant/Lubricant | |||
| TL BOP Wedgelock Bonnet Subassembly Components 18-3/4” 5000 psi WP | |||
| Item | Description | ||
| 2 | Bonnet | ||
| 3 | Operating Piston Subassembly | ||
| 4 | Ram Chanqe Piston (Open) | ||
| 5 | Ram Chanqe Piston (Close) | ||
| 6 | Ram Chanqe Cylinder | ||
| 7 | Ram Chanqe Access Cap | ||
| 11 | Retaining Ring, Spirolox (Connecting Rod) | ||
| 12 | Retainer Ring (Primary Connecting Rod) | ||
| 13 | Back-Up Ring (Connecting Rod) | ||
| 14 | Seal Ring (Secondary Connecting Rod Seal) | ||
| 15 | Spacer Ring (Connecting Rod) | ||
| 16 | Seal Ring | ||
| 17 | Back-Up Ring | ||
| 18 | Retainer Ring | ||
| 19 | Retaining Ring, Spirolox | ||
| 23 | Cylinder, Operating Piston | ||
| 24 | Housing, Skewed Wedgelock | ||
| 25 | Double-Ended Stud | ||
| 26 | Heavy Hex Nut | ||
| 27 | Seal Ring (Tail Rod) | ||
| 28 | Retaining Ring (Tail Rod) | ||
| 29 | Retaining Ring, Spirolox (Tail Rod) | ||
| 30 | Seal Ring | ||
| 31 | O-Ring (Operating Piston) | ||
| 32 | Wear Ring | ||
| 33 | Wear Ring (Ram Change Piston) | ||
| 35 | O-Ring (Ram Change Cylinder) | ||
| 36 | Seal Ring (Ram Change Piston Seal) | ||
| 37 | Seal Ring (Ram Change Piston Seal) | ||
| 38 | O-Ring (Ram Change Access Cap) | ||
| 39 | Wedgelock | ||
| 40 | Piston, Wedgelock | ||
| 41 | Stud, Double-Ended | ||
| 42 | Stud, Double-Ended | ||
| 43 | Nut, Heavy Hex | ||
| 44 | Head “Lock” Side, Wedgelock | ||
| 45 | Head “Unlock” Side, Wedgelock | ||
| 46 | O-Ring | ||
| 47 | O-Ring | ||
| 48 | O-Ring | ||
| 49 | Seal Ring | ||
| 50 | Seal Ring | ||
| 51 | Lifting Eye | ||
| 52 | Plug, Vent | ||
| 53 | Cap, Plug, Tapered | ||
| 54 | Pin, Dowel | ||
| 60 | Tubing Gland | ||
| 61 | Blind Plug | ||
| TL BOP Manual Locking Screw Components | |||
| Item | Description | ||
| 2 | Bonnet | ||
| 3 | Operating Piston | ||
| 4 | Piston, Ram Change (Open) | ||
| 5 | Piston, Ram Change (Close) | ||
| 6 | Cylinder, Ram Change | ||
| 7 | Cap, Ram Change, Access | ||
| 11 | Retaining Ring, Spirolox, Connecting Rod | ||
| 12 | Retainer Ring, Primary Connecting Rod | ||
| 13 | Back-Up Ring, Connecting Rod | ||
| 14 | Seal Ring, Primary Connecting Rod Seal | ||
| 15 | Ring Spacer, Connecting Rod | ||
| 16 | Seal Ring, Secondary Connecting Rod Seal | ||
| 17 | Back-Up Ring, Connecting Rod | ||
| 18 | Retainer Ring, Connecting Rod | ||
| 19 | Retaining Ring, Spirolox, Connecting Rod | ||
| 20 | Wear Ring | ||
| 23 | Operating Piston Cylinder | ||
| 24 | Finish Cylinder Head | ||
| 25 | Double-Ended Stud | ||
| 26 | Nut, Heavy Hex | ||
| 27 | Seal Ring, Tail Rod Seal | ||
| 28 | Back-Up Ring, Tail Rod | ||
| 29 | Retaining Ring, Spirolox, Tail Rod | ||
| 30 | Seal Ring, Operating Piston Seal | ||
| 31 | O-Ring, Operating Cylinder | ||
| 32 | Wear Ring | ||
| 33 | Wear Ring, Ram Change Piston | ||
| 35 | O-Ring, Ram Change Cylinder | ||
| 36 | Seal Ring, Ram Change Piston Seal | ||
| 37 | Seal Ring, Ram Change Piston Seal | ||
| 38 | O-Ring, Ram Change Access Cap | ||
| 39 | Lifting Eye | ||
| 40 | Tubing Gland | ||
| 41 | Blind Plug | ||
| 42 | Back-Up Ring | ||
| 43 | Housing, Locking Screw | ||
| 44 | Locking Screw | ||
| 45 | O-Ring | ||
| 46 | Screw, Hex Head Cap | ||
| 62 | Pipe Plug, Hex Head | ||
| 63 | Bearing Bonnet Flange | ||
| 64 | C.O.G. Adjusting Plate Assembly |
| Expendable Items | |||
| Lubricant, High Viscosity Silicone Oil 8 lb. Can | |||
| Paste, #503 Molybdenum Disulfide | |||
| T & TL BOP 18-3/4” 15,000 psi WP CAMRAM 350 Packers and Top Seal Part Numbers | |||
| Description | 18-3/4″ 15,000 psi | ||
| Top Seal | 645068-01-00-02 | ||
| 3-1/2″ Packer | 645070-04-00-01 | ||
| 4-1/2″ Packer | 645070-06-00-01 | ||
| 5″ Packer | 645070-08-00-01 | ||
| 5-1/2″ Packer | 645070-09-00-01 | ||
| 6-5/8″ Packer | 645070-12-00-01 | ||
| 7″ Packer | 645070-13-00-01 | ||
| 9-5/8″ Packer | 645070-17-00-01 | ||
| 10-3/4″ Packer | 645070-18-00-01 | ||
| 13-3/8″ Packer | 645070-20-00-01 | ||
| 13-5/8″ Packer | 645070-25-00-01 | ||
| CAMRAM 350 Shearing Blind Ram for T and TL BOP Part Numbers | |||
| Item | Description | 18-3/4″ 15,000 psi WP | |
| 2 | Right Packer | 644893-01-00-01 | |
| 3 | Left Packer | 644893-02-00-01 | |
| 4 | Top Seal* | 645068-01-00-02 | |
| 5 | Blade Packer | 644894-01-00-01 | |
| T and TL BOP Shearing Blind Ram Part Numbers | |||
| Item | Description | 18-3/4′ T BOP | |
| Upper SBR 2163096-01 | Lower SBR 2163096-02 | ||
| 1 | Body | 2163095-01 | 2163095-02 |
| 2 | Right Packer | 644893-01-00-01 | 644893-01-00-01 |
| 3 | Left Packer | 644893-02-00-01 | 644893-02-00-01 |
| 4 | Top Seal | 644369-01-00-01 | 644369-01-00-01 |
| 5 | Blade Packer | 644894-01-00-01 | — |
| 6 | Right Wear Pad | 2011279-01 | 2011279-01 |
| 7 | Left Wear Pad | 2011279-02 | 2011279-02 |
| 8 | Screw | 644349-01 | 644349-01 |
| 9 | Blade Insert | 644519-03 | 644519-02 |
| 10 | Screw | 644524-01 | — |
| 11 | Pin | — | 200231 |
| Item | Description | 13-5/8′ | |
| Upper SBR 644591-01 | Lower SBR 644591-02 | ||
| 1 | Body | 644402-01 | 644402-02 |
| 2 | Right Packer | 644490-01 | 644490-01 |
| 3 | Left Packer | 644490-02 | 644490-02 |
| 4 | Top Seal | 644409-01-00-01 | 644409-01-00-01 |
| 5 | Blade Packer | 644541-01 | — |
| 6 | Right Wear Pad | 2011277-01 | 2011277-01 |
| 7 | Left Wear Pad | 2011277-02 | 2011277-02 |
| 8 | Screw | 644349-01 | 644349-01 |
| 9 | Blade Insert | 644581-01-00-01 | 644581-02-00-01 |
| 10 | Screw | 644582-01 | — |
| 11 | Pin | — | 200231 |
| T and TL BOP DVS Shear Rams | |||
| Item | Description | 18-3/4″ 15,000 psi WP T & TL BOP | |
| Upper DVS Lower DVS 2163180-01 2163180-02 | |||
| 1 | Body | 2163118-01 | 2163118-02 |
| 2 | Right Packer | 644893-01-00-01 | 644893-01-00-01 |
| 3 | Left Packer | 644893-02-00-01 | 644893-02-00-01 |
| 4 | Top Seal | 644369-01-00-01 | 644369-01-00-01 |
| 5 | Blade Packer | 2163627-01 | — |
| 6 | Right Wear Pad | 2011279-01 | 2011279-01 |
| 7 | Left Wear Pad | 2011279-02 | 2011279-02 |
| 8 | Screw, Wear Pad | 644349-01 | 644349-01 |
| Item | Description | 18-3/4″ 5000 and 10,000 psi WP TL BOP | |
| Lower DVS Upper DVS 2010373-01-01 2010373-02-01 | |||
| 1 | Body | 2010366-01-01 | 2010366-02-01 |
| 2 | Right Packer | 2010326-01 | 2010326-01 |
| 3 | Left Packer | 2010326-02 | 2010326-02 |
| 4 | Top Seal | 2164247-01 | 2164247-01 |
| 5 | Right Wear Pad | 2011281-01 | 2011281-01 |
| 6 | Left Wear Pad | 2011281-02 | 2011281-02 |
| 7 | Screw | 644349-02 | 644349-02 |
| 8 | Blade Packer | — | 2010332-01 |
| Non-Sealing Super Shear Rams | |||
| Description | 18-3/4” 15,000 psi WP T & TL BOP | ||
| Upper | Lower | ||
| Body | 163387-03 | 163388-03 | |
| Flexpacker and Flexpacker-NR | |||
| BOP Size and Working Pressure | Pipe Size Range | ||
| 18-3/4″ 5000/10,000 psi WP | 2.875″ to 5.000″ | ||
| 18-3/4″ 5000/10,000 psi WP | 5.000″ to 7.000″ | ||
| 18-3/4″ 5000/10,000 psi WP | 3.500″ to 5.500″ | ||
| BOP Size and Working Pressure | 5.000″ to 5.500″ | ||
| 18-3/4″ 15,000 psi WP | 5.000″ to 6.625″ NR | ||
| BOP Size and Working Pressure | Assembly | ||
| 18-3/4″ 5000/10,000 psi WP | 2010423-01 | ||
| 18-3/4″ 5000/10,000 psi WP | 2010423-02-02 | ||
| 18-3/4″ 5000/10,000 psi WP | 2010423-03-01 | ||
| BOP Size and Working Pressure | 2011691-01 | ||
| 18-3/4″ 15,000 psi WP | 2163768-01 | ||
| BOP Size and Working Pressure | Body | ||
| 18-3/4″ 5000/10,000 psi WP | 2010068-10 | ||
| 18-3/4″ 5000/10,000 psi WP | 2010068-16-02 | ||
| 18-3/4″ 5000/10,000 psi WP | 2010068-12-01 | ||
| BOP Size and Working Pressure | 2163089-08 | ||
| 18-3/4″ 15,000 psi WP | 2163767-01 | ||
| BOP Size and Working Pressure | Packer | ||
| 18-3/4″ 5000/10,000 psi WP | 2010093-01 | ||
| 18-3/4″ 5000/10,000 psi WP | 2010356-01 | ||
| 18-3/4″ 5000/10,000 psi WP | 2011989-01 | ||
| BOP Size and Working Pressure | 2011641-01 | ||
| 18-3/4″ 15,000 psi WP | 2011870-01 | ||
| T and TL BOP Variable Bore Ram Part Numbers BOP Size and Working Pressure | |||
| BOP Size and Working Pressure | Top Seal | ||
| 18-3/4″ 5000/10,000 psi WP | 2164247-01 | ||
| 18-3/4″ 5000/10,000 psi WP | 2164247-01 | ||
| 18-3/4″ 5000/10,000 psi WP | 2164247-01 | ||
| 18-3/4″ 15,000 psi WP | 644369-01-00-01 | ||
| 18-3/4″ 15,000 psi WP | 2163491-01 | ||
| BOP Size and Working Pressure | Right Wear Pad | ||
| 18-3/4″ 5000/10,000 psi WP | 2011281-01 | ||
| 18-3/4″ 5000/10,000 psi WP | 2011281-01 | ||
| 18-3/4″ 5000/10,000 psi WP | 2011281-01 | ||
| 18-3/4″ 15,000 psi WP | 2011279-01 | ||
| 18-3/4″ 15,000 psi WP | 2011279-01 | ||
| BOP Size and Working Pressure | Left Wear Pad | ||
| 18-3/4″ 5000/10,000 psi WP | 2011281-02 | ||
| 18-3/4″ 5000/10,000 psi WP | 2011281-02 | ||
| 18-3/4″ 5000/10,000 psi WP | 2011281-02 | ||
| 18-3/4″ 15,000 psi WP | 2011279-02 | ||
| 18-3/4″ 15,000 psi WP | 2011279-02 | ||
| BOP Size and Working Pressure | Screw Wear Pad | ||
| 18-3/4″ 5000/10,000 psi WP | 644349-02 | ||
| 18-3/4″ 5000/10,000 psi WP | 644349-02 | ||
| 18-3/4″ 5000/10,000 psi WP | 644349-02 | ||
| 18-3/4″ 15,000 psi WP | 644349-01 | ||
| 18-3/4″ 15,000 psi WP | 644349-01 | ||
| T and TL BOP Variable Bore Ram Part Numbers | |||
| BOP Size and Working Pressure | Pipe Size Range | Assembly | |
| 13-5/8″ 10,000 psi WP | 2.875″ to 5.000″ | 644618-01 | |
| 13-5/8″ 10,000 psi WP | 3.500″ to 5.500″ | 644618-02 | |
| 18-3/4″ 5000/10,000 psi WP | 3.500″ to 7.625″ | 2163272-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 5.000″ | 2163094-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 5.500″ | 2163169-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 7.625″ | 2163092-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 6.625″ | 2163092-02 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 5.625″ | 2163092-03 | |
| BOP Size and Working Pressure | Pipe Size Range | Body | |
| 13-5/8″ 10,000 psi WP | 2.875″ to 5.000″ | 644567-01 | |
| 13-5/8″ 10,000 psi WP | 3.500″ to 5.500″ | 2164022-01 | |
| 18-3/4″ 5000/10,000 psi WP | 3.500″ to 7.625″ | 2163228-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 5.000″ | 2163093-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 5.500″ | 2163170-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 7.625″ | 2163091-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 6.625″ | 2163091-02 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 5.625″ | 2163091-04 | |
| BOP Size and Working Pressure | Pipe Size Range | Packer | |
| 13-5/8″ 10,000 psi WP | 2.875″ to 5.000″ | 644549-01 | |
| 13-5/8″ 10,000 psi WP | 3.500″ to 5.500″ | 644549-01 | |
| 18-3/4″ 5000/10,000 psi WP | 3.500″ to 7.625″ | 2163493-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 5.000″ | 644531-01-01-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 5.500″ | 644531-01-01-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 7.625″ | 644404-01-00-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 6.625″ | 644404-01-00-01 | |
| 18-3/4″ 15,000 psi WP | 3.500″ to 5.625″ | 644404-01-00-01 | |
| BOP Size and Working Pressure | Top Seal | ||
| 13-5/8″ 10,000 psi WP | 644409-01-00-01 | ||
| 13-5/8″ 10,000 psi WP | 644409-01-00-01 | ||
| 18-3/4″ 5000/10,000 psi WP | 2164247-01 | ||
| 18-3/4″ 15,000 psi WP | 644369-01-00-01 | ||
| 18-3/4″ 15,000 psi WP | 644369-01-00-01 | ||
| 18-3/4″ 15,000 psi WP | 644369-01-00-01 | ||
| 18-3/4″ 15,000 psi WP | 644369-01-00-01 | ||
| 18-3/4″ 15,000 psi WP | 644369-01-00-01 | ||
| BOP Size and Working Pressure | Right Wear Pad | ||
| 13-5/8″ 10,000 psi WP | 2011277-01 | ||
| 13-5/8″ 10,000 psi WP | 2011277-01 | ||
| 18-3/4″ 5000/10,000 psi WP | 2011281-01 | ||
| 18-3/4″ 15,000 psi WP | 2011279-01 | ||
| 18-3/4″ 15,000 psi WP | 2011279-01 | ||
| 18-3/4″ 15,000 psi WP | 2011279-01 | ||
| 18-3/4″ 15,000 psi WP | 2011279-01 | ||
| 18-3/4″ 15,000 psi WP | 2011279-01 | ||
| BOP Size and Working Pressure | Left Wear Pad | ||
| 13-5/8″ 10,000 psi WP | 2011277-02 | ||
| 13-5/8″ 10,000 psi WP | 2011277-02 | ||
| 18-3/4″ 5000/10,000 psi WP | 2011281-02 | ||
| 18-3/4″ 15,000 psi WP | 2011279-02 | ||
| 18-3/4″ 15,000 psi WP | 2011279-02 | ||
| 18-3/4″ 15,000 psi WP | 2011279-02 | ||
| 18-3/4″ 15,000 psi WP | 2011279-02 | ||
| 18-3/4″ 15,000 psi WP | |||
| BOP Size and Working Pressure | Screw Wear Pad | ||
| 13-5/8″ 10,000 psi WP | 644349-01 | ||
| 13-5/8″ 10,000 psi WP | 644349-01 | ||
| 18-3/4″ 5000/10,000 psi WP | 644349-02 | ||
| 18-3/4″ 15,000 psi WP | 644349-01 | ||
| 18-3/4″ 15,000 psi WP | 644349-01 | ||
| 18-3/4″ 15,000 psi WP | 644349-01 | ||
| 18-3/4″ 15,000 psi WP | 644349-01 | ||
| 18-3/4″ 15,000 psi WP | 644349-01 | ||