| Part: 877-01-1 | | | | |
| Description: BUW SAVER INTERLOCK KIT | | | | |
| Drawing ID: 877-01-1 Rev No: B | | | | |
| Item Qty | Units | Part ID | Description | |
| 01B | 1.00 | EA | P01-1003-010 | |
| 01C | 2.00 | EA | H15-070123-08-04 | |
| 01D | 2.00 | EA | H15-070110-08 | |
| 01E | 2.00 | EA | H15-070123-06-04 | |
| 01F | 2.00 | EA | H15-070110-06 | |
| 01G | 2.00 | EA | H15-070432-04-04 | |
| 01H | 2.00 | EA | H15-070432-06-06 | |
| 01I | 2.00 | EA | H15-070432-08-08 | |
| 01J | 8.00 | EA | H15-070102-04-04 | |
| 01K | 4.00 | EA | H15-070202-04-04 | |
| 01L | 70.00 | FT | H16-1801-04 | |
| 01M | 8.00 | EA | H15-30682-04-04 | |
| 01N | 2.00 | EA | H15-33982-04-04 | |
| 01O | 4.00 | EA | H15-30182-04-04 | |
| 01P | 1.00 | EA | H15-070601-04-04 | |
| 01R | 1.00 | EA | H15-1010-010 | |
| | | | |
| Part: ACC-J10794 | | | | |
| Description: ACCESSORIES, SHIP LOOSE ITEMS, 750 TON | | | | |
| Drawing ID: NO DRAWING Rev No: 0 | | | | |
| Item Qty | Units | Part ID | Description | |
| 1.00 | EA | DT10990 | SUPPORT, QUILL, 650/750 GRIPPER DIE REM | |
| 1.00 | EA | AY10253 | TOOL, INSTALLATION/REMOVAL, RM, 650 TON | |
| 2.00 | EA | 594-02-7 | LUG, ELEVATOR LINK, 500 TON, 4.70 BORE | |
| 2.00 | EA | 594-02-4 | LUG, ELEVATOR LINK ,350 TON | |
| 1.00 | EA | AY10661 | KIT, CONSOLE PURGE | |
| 1.00 | EA | 877-01-1 | BUW SAVER INTERLOCK KIT | |
| 1.00 | EA | DT12152 | GASKET, COVER PLATE, TORQUE BOOST | |
| 1.00 | EA | DT12151 | PLATE, COVER, TORQUE BOOST | |
| 1.00 | EA | M20-1037-010 | START-UP KIT | |
| 1.00 | EA | 875-01-1 | TOOL KIT ASSY, TOP DRIVE SYSTEM | |
| Part: AY10008 | | | | |
| Description: GUIDE RUNNER ASSY, 0 OFFSET, 102 LG | | | | |
| Drawing ID: AY10008-X Rev No: F | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 4.00 | EA | 694-22-0 | RUNNER, GUIDE, 102 LG |
| 02 | 1.00 | EA | 694-25-0 | PLATE, ADJ, DS, 0 OFFSET |
| 03 | 1.00 | EA | 694-25-1 | PLATE, ADJ, ODS, 0 OFFSET |
| 04 | 8.00 | EA | 737-28-1 | SHIM, GUIDE, 12 GA (1/8) |
| 05 | 4.00 | EA | 841-12-0 | ADJUSTER, GUIDE RAIL |
| 06 | 4.00 | EA | 841-13-0 | ADJUSTER, GUIDE RAIL |
| 07 | 4.00 | EA | DT10100 | CAPSCR, FRAME ADJ, 1-8UNC x 2.50 |
| 08 | 4.00 | EA | DT10101 | CAPSCR, FRAME ADJ, 1-8UNC x 4.34 |
| 09 | 6.00 | EA | M19-4012-010 | EYEBOLT, SHLD TYPE, 1/2-13UNC x 1 1/2 |
| 10 | 4.00 | EA | M19-3007-010 | WIRE ROPE CRIMP |
| 11 | 2.00 | EA | M19-5002-010 | QUICK LINK, 8 MM (5/16 IN) |
| 12 | 48.00 | IN | M21-2001-010 | WIRE ROPE, 3/16 |
| 13 | 8.00 | EA | DT11542 | CAPSCR, FRAME ADJ, 1-8UNC x 3.25 |
| 14 | 8.00 | EA | SH-1000NC-0425-W | CAPSCR, HEX SOC HD, 1-8UNC x 4.25, GR8 |
| 15 | 8.00 | EA | SH-1000NC-0300-W | CAPSCR, HEX SOC HD, 1-8UNC x 3.00 |
| 16 | 16.00 | EA | SH-1000NC-0275-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.75, WIRED |
| 17 | 2.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| 18 | 32.00 | EA | FW-1000-A | WASHER, F, 1, PLAIN, TYPE A |
| 19 | 2.00 | EA | FW-0500-A | WASHER, F, 1/2, PLAIN, TYPE A |
| 20 | 32.00 | EA | LW-1000-IT | LOCKWASHER, 1 INT TOOTH |
| 21 | 16.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 22 | 8.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| Part: AY10071-4 | | | | |
| Description: HARPOON ASSY, 217.50 LG, 2 LATCH | | | | |
| Drawing ID: AY10071-X Rev No: A | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 895-84-0-21750 | HARPOON, 217.50 LG, 2 LATCH |
| 02 | 2.00 | EA | 850-17-0 | HANGER LATCH PTG |
| 03 | 2.00 | EA | 850-18-0 | HANGER LATCH PIN PTG |
| 04 | 4.00 | EA | 891-51-0 | LATCH PIN RETAINER CROWN HANGE |
| 05 | 24.00 | IN | M21-2001-010 | WIRE ROPE, 3/16 |
| 06 | 4.00 | EA | SH-0375NC-0050-W | CAPSCR, HEX SOC HD, 3/8-16UNC x 0.50, W |
| 07 | 21.00 | FT | M21-2001-010 | WIRE ROPE, 3/16 |
| 08 | 1.00 | EA | M19-5006-010 | QUICK LINK, 10mm (7/16 in) |
| 09 | 1.00 | FT | P09-1017-010 | HOSE, AIR HOSE, 1/4in |
| 10 | 6.00 | EA | M19-3007-010 | WIRE ROPE CRIMP |
| PART NUMBER DESIGNATION | |
| PART ID | DESCRIPTION | *A” | “B* | |
| 10071-1 | HARPOON ASSY, 88.00 LG, C/W LATCHES AND RELEASE CABLE | 88* | 12 1/2* | |
| 10071-2 | HARPOON ASSY, 113.50 LG, C/W LATCHES AND RELEASE CABLE | 113 1/2* | 12 1/2* | |
| 10071-3 | HARPOON ASSY, 145.50 LG, C/W LATCHES AND RELEASE CABLE | 145 1/2* | 12 1/2* | |
| 10071-4 | HARPOON ASSY, 217.50 LG, C/W LATCHES AND RELEASE CABLE | 217 1/2* | 12 1/2* | |
| 10071-5 | HARPOON ASSY, 169.50 LG, C/W LATCHES AND RELEASE CABLE | 169 1/2’ | 12 1/2* | |
| 10071-6 | HARPOON ASSY. 193.50 LG. C/W LATCHES AND RELEASE CABLE | 193 1/2* | 12 1/2* | |
| 10071-7 | HARPOON ASSY, 88.00 LG, C/W LATCHES AND RELEASE CABLE | 88* | 13 1/2* | |
| 10071-6 | HARPOON ASSY, 199.00 LG, C/W LATCHES AND RELEASE CABLE | 199 1/2* | 12 1/2* | |
| 10071-9 | HARPOON ASSY. 125.50 LG. C/W LATCHES AND RELEASE CABLE | 125 1/2* | 12 1/2* | |
| 10071-10 | HARPOON ASSY. 258.50 LG. C/W LATCHES AND RELEASE CABLE | 258 1/2* | 12 1/2* | |
| 10071-11 | HARPOON ASSY, 300.00 LG, C/W LATCHES AND RELEASE CABLE | 300* | 12 1/2* | |
| 10071-12 | HARPOON ASSY, 208.00 LG, C/W LATCHES AND RELEASE CABLE | 208’ | 12 1/2* | |
| 10071-13 | HARPOON ASSY, 233.00 LG, C/W LATCHES AND RELEASE CABLE | 233* | 12 1/2* | |
| 10071-14 | HARPOON ASSY, 265.50 LG, C/W LATCHES AND RELEASE CABLE | 265 1/2* | 12 1/2* | |
| 10071-15 | HARPOON ASSY, 169.50 LG, C/W LATCHES AND RELEASE CABLE | 169 1/2* | 13 1/2* | |
| | | | |
| Part: AY10086 | | | | |
| Description: SERVICE LOOP, HYD, 75 FT | | | | |
| Drawing ID: AY10086-X Rev No: F | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 2.00 | EA | 799-13-0 | TEE, 2 IN, HYDRAULIC UTILITY LINE |
| 02 | 2.00 | EA | 799-14-0 | BUSHING 2 NPT 3/4 NPT – 3/4 NP |
| 03 | 8.00 | EA | 830-11-0 | HYDRAULIC SERVICE LINE PINS |
| 04 | 2.00 | EA | E22-1016-020 | CABLE GRIP, DOUBLE EYE, 2.50 – 2.99 |
| 05 | 2.00 | EA | F06-1006-010 | BUSH, 2 NPT x 3/4 NPT, FS 6000# |
| 06 | 2.00 | EA | H15-070102-32-32 | ADAPTER, MALE 2 JIC, MALE 2 NPT |
| 07 | 1.00 | EA | H15-1027-010 | QUICK PRESS NIP, 3/4 BDY, FEM 3/4 NPT |
| 08 | 1.00 | EA | H15-1027-01A | CAP, BRASS, QUICK CPLER, 3/4 |
| 09 | 1.00 | EA | H15-1029-010 | QUICK PRESS NUT CPLER, FEM 3/4 NPT |
| 10 | 1.00 | EA | H15-1029-01A | PLUG, BRASS, QUICK CPLER, 3/4 |
| 11 | 2.00 | EA | H15-140237-12-12 | ELL 90°, MALE 3/4 NPT |
| 12 | 1.00 | EA | H15-140239-12-12 | STREET ELL 90°, 3/4 NPT |
| 13 | 2.00 | EA | H15-2000-12-12 | ELL 90°, MALE 3/4 ORFS, MALE 3/4 NPT |
| 14 | 2.00 | EA | H15-2001-12-12 | ADAPTER, MALE 3/4 ORFS, MALE 3/4 NPT |
| 15 | 2.00 | EA | H15-3001-12-12 | HOSE FTG, STR LG, 3/4, FEM SWV 3/4 ORFS |
| 16 | 1.00 | EA | H15-520221-12 | ELL 90°, MALE 3/4 ORFS, FEM SWV 3/4 ORFS |
| 17 | 74.14 | FT | H16-1471-12 | HOSE, HP, 3/4, 3125 psi |
| 18 | 1.00 | EA | H16-7000-010 | HOSE, 2 DIA x 73.83 FT LG |
| 19 | 8.00 | EA | HH-0250NC-0150-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 1.50, GR8, W |
| 20 | 8.00 | EA | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER |
| 21 | 4.00 | EA | H15-520112-12 | CAP, 3/4 ORFS |
| 22 | 2.00 | EA | M10123 | CLAMP, HOSE, CRIMP-TYPE, 24.00 |
| REF | 0.00 | EA | H17-1000-010 | SPLICE KIT, HYDRAULIC SERVICE LOOP |
| PART ID | (NOMINAL) ’A’ | ’B’ | | |
| AY10086 | 75-0″ | 73-4″ | | |
| AY10086-1 | 71-0″ | 69-4” | | |
| AY10086-2 | 73-0″ | 71’-4″ | | |
| AY10086-3 | 78-0” | 76-4” | | |
| AY10086-4 | 51’-0″ | 49-4″ | | |
| AY10086-5 | 52-0″ | 50’-4″ | | |
| AY10086-6 | 00 o f o | 84-4″ | | |
| AY10086-7 | 76-6.75″ | 74-10.75″ | | |
| AY10086-8 | 68-0″ | 66-4″ | | |
| AY10086-9 | 67-0” | 65-4” | | |
| AY10086—10 | 69-0” | 67-4” | | |
| | | | |
| 04/08/27 | SEA | ECN 1057 REMOVE ITEM 4 & 22 | | |
| 02/03/15 | JRS | ADD ITEM 22 AT END OF GRIPS Sc NOTE 2 | | |
| 01/05/04 | LAC | ECN 1390, ADDED LINE TO CHART | | |
| 01/03/20 | JSC | ROTATED HYD FITTING 180′ | | |
| 06/02/2B | NDS | ECN 1232 ADDED ITEM 4 & 22 | | |
| Y/M/D | BY | REVISION DESCRIPTION | | |
| Part: AY10495-3 | | | | |
| Description: LWCV ASSY, MANUAL, 6 5/8 REG x 6 5/8 REG | | | | |
| Drawing ID: AY10495-X Rev No: 0 | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 593-29-0 | TJC ASSY, 7.00-7.63, FEMALE, HT |
| 02 | 1.00 | EA | 593-34-0 | TJC ASSY, 7.38, SLEEVE TYPE |
| 03 | 2.00 | EA | R10314 | LWCV, LT, 6 5/8R BOX, 6 5/8R PIN, 16 LG |
| | | | |
| PART ID | ’A’ | ’B’ | REFERENCE | MATING BODY DIA |
| AY10495-1 | 16.00 | 7.38 DIA | M & M | 8.45 OD |
| AY10495-2 | 16.00 | 7.38 DIA | M & M | 8.45 OD |
| | | | |
| Part: AY10661 | | | | |
| Description: KIT, CONSOLE PURGE | | | | |
| Drawing ID: AY10661 Rev No: A | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | DT10917 | BRACKET, PURGE KIT MOUNTING |
| 02 | 1.00 | EA | P02-1007-010 | PRESSURE REGULATOR 0-2 PSIG |
| 03 | 1.00 | EA | N10095 | GAUGE, PRESSURE, 0 – 3 PSI |
| 04 | 1.00 | EA | P02-1010-010 | AIR FILTER 250 PSI MAX WORK PRESSURE |
| 05 | 1.00 | EA | H15-140137-04-04 | NIP, MALE PIPE, HEX, 1/4 NPT |
| 06 | 2.00 | EA | H15-070202-04-04 | ELL 90°, MALE 1/4 JIC, MALE 1/4 NPT |
| 07 | 3.00 | EA | H15-30682-04-04 | HOSE BARB, 1/4, FEM SWV 1/4 JIC |
| 08 | 1.00 | EA | H15-30182-04-04 | HOSE BARB, 1/4, MALE 1/4 NPT |
| 09 | 1.00 | EA | H15-1011-010 | QUICK DISC-NIP, 1/4 BDY, 1/4 NPTF |
| 10 | 1.00 | EA | H15-070432-04-04 | TEE, SWV NUT RUN, 1/4 JIC |
| 11 | 1.00 | EA | H15-070432-06-06 | TEE, SWV NUT RUN, 3/8 JIC |
| 12 | 1.00 | EA | H15-070432-08-08 | TEE, FEM SWV RUN 1/2, MALE 1/2 JIC |
| 13 | 1.00 | EA | H15-070123-06-04 | REDUCER, FEMALE 3/8 JIC, MALE 1/4 JIC |
| 13A | 1.00 | EA | H15-070110-06 | NUT, 3/8 JIC |
| 14 | 1.00 | EA | H15-070123-08-04 | REDUCER, FEMALE 1/2 JIC, MALE 1/4 JIC |
| 14A | 1.00 | EA | H15-070110-08 | NUT, 1/2 JIC |
| 15 | 1.00 | EA | H15-140424-04-04 | TEE, MALE RUN, FEM, 1/4 NPT |
| 16 | 1.00 | EA | H15-140424-06-06 | TEE, MALE RUN, FEM, 3/8 NPT |
| 17 | 1.00 | EA | H15-140424-08-08 | TEE, MALE RUN, FEM, 1/2 NPT |
| 18 | 1.00 | EA | H15-070102-04-04 | ADPT, MALE 1/4 JIC, MALE 1/4 NPT |
| 19 | 1.00 | EA | H15-070102-04-06 | ADAPTER, MALE 1/4 JIC, MALE 3/8 NPT |
| 20 | 1.00 | EA | H15-070102-04-08 | ADAPTER, MALE 1/4 JIC, MALE 1/2 NPT |
| 21 | 40.00 | FT | H16-1801-04 | HOSE, LP, 1/4, GRAY, 250 PSI |
| 22 | 2.00 | EA | SH-0250NC-0050-W | CAPSCR, HEX SOC HD, 1/4-20UNC x 0.50 |
| 23 | 1.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 24 | 2.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 25 | 1.00 | EA | DT12562 | U-BOLT CLAMP, 1/4-20 UNC, CONSOLE PURGE |
| 26 | 2.00 | EA | SH-0250NC-0100-W | CAPSCR, HEX SOC HD, 1/4-20UNC x 1.00, W |
| 27 | 4.00 | EA | FW-0250-A | WASHER, F, 1/4, PLAIN, TYPE A |
| 28 | 2.00 | EA | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER |
| 29 | 1.00 | EA | H15-1010-010 | QUICK DISC-CPLER, 1/4 BDY, 1/4 NPTF |
| 30 | 1.00 | EA | H15-140237-04-04 | ELL 90°, MALE 1/4 NPT |
| REF | 25.00 | EA | E10442 | CABLE TIE, 7.4 IN LG, 50 LB |
| | | | |
| | | | |
| | | | |
| Part: AY10948 | | | | |
| | | | |
| Description: GOOSENECK ASSY, 4 IN BORE, 7500 PSI WP | | | | |
| Drawing ID: AY10948 Rev No: A | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | DT11418-1 | GOOSENECK, 4 INCH 7500 PSI |
| 02 | 1.00 | EA | DT11418-2 | MUDLINE ELBOW |
| 03 | 1.00 | EA | DT11418-3 | MUDLINE ELBOW |
| 04 | 1.00 | EA | DT10345 | SPLIT RING, RETNG, GOOSENECK, 4 BORE |
| 05 | 1.00 | EA | S01-1355-01N | O-RING |
| 06 | 1.00 | EA | 325-17-0 | UNION NUT, BLANKING ASSY, 10000 PSI |
| 07 | 12.00 | EA | SH-1000NC-0275-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.75, WIRED |
| 08 | 3.00 | EA | F04-1002-040 | UNION SEAL |
| 09 | 1.00 | EA | DT11600 | MUDLINE, ADAPT, FEM 5 IN TO FEM 4 IN |
| 10 | 1.00 | EA | F04-1000-040 | UNION, SEAL, 4 IN, FIG 1002 |
| | | | |
| Part: AY10952 | | | | |
| Description: BLOCK INTERFACE ASSY, 750 TON, 81.9 LG | | | | |
| Drawing ID: AY10952 Rev No: 0 | | | | |
| | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | DT11388 | BAIL, 750 TON |
| 02 | 2.00 | EA | DT11387 | UPPER LINK, ASSY, 750 TON, 81.85 LG |
| 03 | 4.00 | EA | 753-15-0 | PIN, BAIL, 650/750 TON, 4.75 DIA |
| 04 | 8.00 | EA | HH-0500NC-0550-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 5.50, GR8, W |
| 05 | 8.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| 06 | 16.00 | EA | FW-0500-A | WASHER, F, 1/2, PLAIN, TYPE A |
| | | | |
| | | | |
| Part: AY11383-19 | | | | |
| Description: SERVICE LOOP, EL, DUAL, AC, FLEX, 77 FT | | | | |
| Drawing ID: AY11383-X Rev No: AM | | | | |
| | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | AY11502-1-1 | SERVICE LOOP,EL,DUAL,AC PWR, 5IN, 77 FT |
| 02 | 1.00 | EA | AY11385-2-12 | SERVICE LOOP, EL, DUAL, AC CONTROL, 4IN |
| 03 | 2.00 | EA | DT12143 | PIN, SERVICE LOOP, 4 IN, DUAL |
| 04 | 4.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 05 | 6.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 06 | 2.00 | EA | M24-2001-010 | SAFETY PIN |
| | | | |
| DUAL SERVICE LOOP CHART |
| • X “ | POWER LOOP | CONTROL LOOP | NOTES | CROSS—REF, |
| -1 | AYI1384—1—1 | AYI1385—1—1 | FLEX. 77 FT.. TD-HW. MAST-HW | AY10773-1-1 |
| – 2 | AY11S02—1—1 | AY11385-2-2 | FLEX, AC, 77 FT., TD-HW, MAST-HW | AY10773-12-11 |
| – 3 | AYI1384—1—1 | AYI1385-1—3 | NON—FLEX, 77 FT* ID-PLUG, MAST-HW | AYI0773-1-3 |
| – 4 | AY11502—1—1 | AY113B5-2-4 | FLEX, AC, 77 FT., HWi HW, 4 TP HOS | AY10773—12—11 |
| – 6 | AY113B4—2—1 | AY11385-3-5 | LEX, DC, BO FT., TD-HW, MAST-PUJG (PM) | AYI0773-10-12 |
| – e | AY11S02-2-1 | AYI1365-3-4 | FLEX. AC. 80 FT.. HW HW 4 TP HOSE | N/A |
| – 7 | AY11502—2—1 | AY11365-1-8 | FLEX. 77 FT.. TD-HW. UAST-HW.(2)-IX/1S | AYI0773-1-1 |
| – 8 | AY11384-1-1 | AY11388-1—7 | NON-FLEX, 77 FT., TD-HW, MAST-HW | AYI0773-1-7 |
| – 9 | AYI1304-2-1 | AY113B5—3-8 | FLEX, DC, 80 FT.. TD-HW, MAST-HW | N/A |
| – 10 | AY113B4-3-1 | AYI1385—4—9 | FLEX, DC, SR, 74 FT., TD-HW, MAST-HW | AYI0773-3-5 |
| – 11 | AY113B4—4—1—2 | AYI1389—9—1—2 | FLEX DC. 77 FT.. TD-HW MAST-HW | AYI0773-7-1-2 |
| – 12 | AYI13B4-5-1 | AY11385—6—7 | NON-FLEX 77 FT.. TD-HW. MAST-HW | AYI0773-14-7 |
| – 13 | AYI1384—6—1 | AYI138S-7-7 | NGN—FLEX 81 FT, TD-HW MAST-HW | 954-04-2 |
| – 14 | AY11384-1-1 | AYI1385-1—10 | FLEX 77 FT, TD-HW. MAST-HW | AYI0773-1—2 |
| – 15 | AY113B4—7—1 | AY11365—8-5 | LEX DC. 77 FT, TD-HW MAST-PLUG (PM) | N/A |
| – 16 | AY11384—3-1 | AY11355-4—8 | FLEX Oft SH. 74 FT, TD-HW MAST-HW | AYI0773-9-1 |
| – 17 | AYI1384-6-1 | AY11385—9—9 | FLEX DC. SR. 73 FT, TD-HW. MAST-HW | N/A |
| – 18 | AY11502-3-1 | AY11385-10-11—2 | FLEX AC, B3 FT, HW, PL, 4 TP HOS | AVI0773-3®-21—1 |
| – 19 | AY11802-1—1 | AY11386-2-12 | FLEX AC, 77 FT, TD-HW MAST-HW | N/A |
| – 20 | AYI1502—4—1 | AY11385-11-12-2 | FLEX AC, 83 FT, HW, PL, 4 TP HOS | N/A |
| | | | |
| Part: AY11385-2-12 | | | | |
| Description: SERVICE LOOP, EL, DUAL, AC CONTROL, 4IN | | | | |
| Drawing ID: AY11385-X-Y Rev No: AL | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 2.00 | EA | DT12141 | HOSE END, CONTROL, 4 IN, DUAL LOOP |
| 02 | 2.00 | EA | DT12142 | COVER PLATE, MCT, 4 IN, HOSE END |
| 03 | 2.00 | EA | E10762 | FRAME, MCT, ROUND, 90mm X 90mm |
| 04 | 1.00 | EA | E10770-80 | HOSE, 4 IN, HD MARINE EXHAUST, 80 FT LG |
| 05A | 4.00 | EA | F05-1016-010 | DOUBLE BOLT CLAMP 4 IN |
| 05B | 8.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| 07 | 8.00 | EA | HH-0500NC-0150-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8, W |
| 08 | 8.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| 11 | 1.00 | EA | 669-18-0 | SERIAL NUMBER PLATE, ELECT SERVICE LOOP |
| 12 | 4.00 | EA | DS-U-4-312 | SCREW, DRIVE, U-TYPE, #4 x 0.312 LG |
| 14 | 2.00 | EA | 1006-100-375 | PIN, 1.00 DIA, 3.75 LG, HEAD/R |
| 15 | 2.00 | EA | HH-0250NC-0150-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 1.50, GR8, W |
| 16 | 2.00 | EA | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER |
| 17 | 2.00 | EA | H15-3007-08-08 | HOSE FTG, STR, 1/2, FEM SWV 1/2 ORFS |
| 18 | 2.00 | EA | H15-520109-08 | PLUG, HEX HD, 1/2 ORFS |
| 19 | 88.00 | FT | H16-1301-08 | HOSE, HP SAE 100R2, 1/2, 3500 psi |
| 20 | 95.50 | FT | E10967 | CABLE, 4 TP #20 AWG, 300V, SHLD |
| 22A | 96.50 | FT | E11059 | CABLE, 7 C #10 AWG, PENDANT, POLYRAD SFL |
| 22B | 96.50 | FT | E10196 | CABLE, 4 C #8 AWG, PEND,POLYRAD XT,600V |
| 23 | 96.50 | FT | E11302 | CABLE, 10 C #12 AWG, PERFECT-A-FLEX,600V |
| 24 | 95.50 | FT | E03-1035-030 | CABLE, 1 TSP #20 AWG, BRAIDED ARM |
| 24 | 2.00 | EA | E10499 | CABLE TIE, 8.0 IN LG, 18 LB |
| 25 | 176.00 | FT | H16-1836-10 | HOSE, 836, 5/8, 250 psi |
| 26 | 18.00 | EA | E10007 | MODULE, MCT, 30mm, 12mm-25mm |
| 33 | 12.00 | EA | E22-1023-010 | CABLE GRIP, OFFSET EYE, 0.75 – 0.99 |
| 35 | 2.00 | EA | E10816 | CABLE GRIP, RISER SUPPORT, 0.4in-0.61in |
| 58 | 2.00 | EA | E10499 | CABLE TIE, 8.0 IN LG, 18 LB |
| | | | |
| Part: AY11446 | | | | |
| | | | |
| Description: TR CLAMP ASSY, PINNED | | | | |
| Drawing ID: AY11446 Rev No: D | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | DT12253 | PLATE, LUG, PIV/PIN, TRNBKL, TR |
| 02 | 1.00 | EA | DT12251 | LUG, PIVOTING, TRNBKL, TR |
| 03 | 1.00 | EA | 850-72-0 | SAFETY SLING PIN PTG |
| 04 | 1.00 | EA | 1006-175-475 | PIN, 1.75 DIA, 4.75 LG, HEAD/R |
| 05 | 1.00 | EA | 1006-206-1350 | PIN, 2.06 DIA, 13.50 LG, HEAD/R |
| 06 | 1.00 | EA | DT12254 | PLATE, CLAMP, PIV/PIN, TRNBKL, TR |
| 07 | 3.00 | EA | HH-1000NC-0450-B7-G-W | CAPSCR, HEX HD, 1-8UNC x 4.50, B7, GAL,W |
| 08 | 6.00 | EA | FW-1000-A-G | WASHER, F, 1, PLAIN, TYPE A, GALV |
| 09 | 3.00 | EA | LN-1000NC-2H-ANCO-G | HEX NUT, 1-8UNC, 2H, ANCO, GALV |
| 10 | 1.00 | EA | M12-1000-010 | GREASE NIPPLE, 1/8 NPT, STRAIGHT |
| 11 | 1.00 | EA | M24-2001-010 | SAFETY PIN |
| 12 | 4.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 13 | 4.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 14 | 1.00 | EA | HH-0375NC-0225-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 2.25, GR8 |
| 15 | 2.00 | EA | LN-0375NC-GR8 | LOCKNUT, 3/8-16UNC, GR8, STOVER |
| 16 | 1.00 | EA | HH-0375NC-0250-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 2.50, GR8, W |
| 17 | 8.00 | FT | M10022 | WIRE ROPE, 1/8, STAINLESS, 7 X 19 |
| 18 | 8.00 | EA | M19-3009-010 | FERRULE, 1/8, OVAL, ALUMINIUM |
| 19 | 3.00 | EA | M10241 | FERRULE, 1/8, STOP, ALUMINIUM |
| | | | |
| | | | |
| D | 04/06/11 | JOM | ECN-1016 CHANGED SAFETY PIN WIRING, ADI | ED ITE |
| C | 02/05/31 | JRS | ECN-832 ADDITION OF 1/8 WIRING | |
| B | 01/12/17 | JSC | RMVD QTY 2 OF ITM 11; ADDED ITM 14, 15, & 16, CHNGD | rM 5 TO |
| A | 01/11/16 | JSC | ITEM 4 PART# CHANGED | |
| No. | Y/M/D | BY | REVISION DESCRIPTION | CHKD. |
| | | | |
| | | | |
| Part: AY11498-0875-RH | | | | |
| Description: TRNBKL, EYE, 8.75 LG, RH, W/BEARING | | | | |
| Drawing ID: AY11498-0875-RH Rev No: 0 | | | | |
| | | | |
| Item | Qty Units | Part ID | Description | |
| 01 | 1.00 EA | DT11291-0875-RH | TRNBKL, EYE, 1 3/4, RH, 8.75, ACME | |
| 02 | 1.00 EA | M04-1100-010 | BRG, PLAIN RADIAL /W SEALS | |
| 03 | 1.00 EA | M11-1019-010 | RETNG RING, INT | |
| 04 | 4.00 EA | M12-1006-010 | GREASE NIPPLE, 1/8 NPT, 45 DEGREE | |
| | | | |
| Part: AY11502-1-1 | | | | |
| Description: SERVICE LOOP,EL,DUAL,AC PWR, 5IN, 77 FT | | | | |
| Drawing ID: AY11502-X-Y Rev No: W | | | | |
| | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 2.00 | EA | DT12336 | HOSE END, POWER, 5 IN, DUAL LOOP |
| 02 | 2.00 | EA | DT12142 | COVER PLATE, MCT, 4 IN, HOSE END |
| 03 | 2.00 | EA | E10843 | FRAME, MCT, ROUND, RS TYPE, 150mm DIA |
| 04 | 1.00 | EA | E10263-80 | HOSE, 5 IN, HD MARINE EXHAUST, 80 FT LG |
| 05A | 4.00 | EA | F05-1004-010 | DOUBLE BOLT CLAMP 5in |
| 05B | 8.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| 06 | 6.00 | EA | E16-2000-010 | LUG, 2/0 AWG, 1 HOLE, 1/2 BOLT |
| 07 | 2.00 | EA | SH-0500NC-0175-SS | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.75 |
| 08 | 4.00 | EA | LN-0500NC-SS | LOCKNUT, 1/2-13UNC, SS |
| 09 | 6.00 | EA | HH-0500NC-0150-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8, W |
| 10 | 8.00 | EA | HN-0500NC-GR8 | HEX NUT, 1/2-13UNC, GR8 |
| 13 | 1.00 | EA | F07-1005-010 | STREET ELL 90°, 2 NPT, MI 150# |
| 14 | 1.00 | EA | F10-1000-010 | NIPPLE 2 NPT KING |
| 15A | 10.00 | FT | P10050 | HOSE, AIR, 2, BLK/GRN, 150 PSI |
| 15B | 2.00 | EA | F05-1005-010 | CLAMP, AIR HOSE, 2 |
| 16 | 1.00 | EA | 823-29-0 | STREET ELBOW, 2, w/SCREEN |
| 17 | 1.00 | EA | 669-18-0 | SERIAL NUMBER PLATE, ELECT SERVICE LOOP |
| 18 | 4.00 | EA | DS-U-4-312 | SCREW, DRIVE, U-TYPE, #4 x 0.312 LG |
| 19 | 4.00 | EA | 1006-100-375 | PIN, 1.00 DIA, 3.75 LG, HEAD/R |
| 20 | 4.00 | EA | HH-0250NC-0150-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 1.50, GR8, W |
| 21 | 4.00 | EA | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER |
| 22A | 277.50 | FT | E10232 | CABLE, 1 C/777 MCM, BRONZE ARMOR, 2000V |
| 22B | 3.00 | EA | E10547 | LUG, 777 MCM, 1 HOLE, 1/2 BOLT,PULL THRU |
| 23A | 3.00 | EA | E10547 | LUG, 777 MCM, 1 HOLE, 1/2 BOLT,PULL THRU |
| 24 | 91.50 | FT | E03-1005-010 | CABLE, 1 C #2/0 AWG, 2000V, GENERIC |
| 25 | 2.00 | EA | E10824 | MODULE, MCT, THREE HOLE, RS150 |
| 27 | 6.00 | EA | E10268 | CABLE GRIP, OFFSET EYE, 1.50 – 1.74 |
| 28 | 2.00 | EA | E22-1023-010 | CABLE GRIP, OFFSET EYE, 0.75 – 0.99 |
| 29 | 0.00 | EA | DT12143 | PIN, SERVICE LOOP, 4 IN, DUAL |
| REF | 1.00 | FT | C10062 | HEAT SHRINK, 2 IN, BLUE |
| REF | 1.00 | FT | C10060 | HEAT SHRINK, 2 IN, RED |
| REF | 1.00 | FT | C10059 | HEAT SHRINK, 2 IN, BLACK |
| REF | 3.00 | FT | C10067 | HEAT SHRINK, 2 IN, CLEAR |
| | | | |
| 58 | 4.00 | EA | HH-0375N C-0125-G R8-W | |
| 59A | 2.00 | EA | DT14159-015 | |
| 59B | 2.00 | EA | DT14159-030 | |
| 59C | 2.00 | EA | DT14159-060 | |
| 59D | 2.00 | EA | DT14159-120 | |
| 60 | 2.00 | EA | H15-520120-08-06 | |
| 61 | 2.00 | EA | H15-520112-08 | |
| R01 | 1.00 | EA | DT13773 | |
| R02 | 4.00 | EA | DS-U-0-188 | |
| Part: AY12221 | | | | |
| Description: ACTUATOR ASSY, LWCV, CDTL, 8.45, HYD | | | | |
| Drawing ID: AY12221 Rev No: D | | | | |
| | | | |
| Item | Qty | Units | Part ID | Description |
| 03 | 1.00 | EA | DT13632 | SLEEVE, MTG, ACTUATOR, LWCV, 8.45 IN |
| 04 | 2.00 | EA | DT13633 | SLEEVE, INNER,ACTUATOR, 8.45, FINAL MACH |
| 05 | 2.00 | EA | DT13634 | 8/RETAINER, BRG, ACTUATOR, LWCV, 8.45 IN |
| 06 | 2.00 | EA | DT14355 | HOUSING, BRG, ACTUATOR, LWCV, 8.45 IN |
| 07 | 2.00 | EA | DT13636 | SLEEVE, GUIDE, ACTUATOR, LWCV, 8.45 IN |
| 08 | 4.00 | EA | DT12930 | RETAINER PLATE |
| 09 | 2.00 | EA | DT10715 | HYDRAULIC CYLINDER |
| 09A | 0.00 | EA | S08-1038-010 | SEAL KIT, CYL, 2 BORE, 1 3/8 ROD |
| 10 | 2.00 | EA | DT10716 | CYLINDER MOUNTING BRACKET |
| 11 | 4.00 | EA | DT10717 | RETAINING WASHER |
| 12 | 2.00 | EA | DT10718 | GROMMET |
| 13 | 2.00 | EA | DT13642 | RING, LABYRINTH, ACTUATOR, LWCV,8.45 IN |
| 14 | 2.00 | EA | S01-1267-01N | O-RING |
| 15 | 2.00 | EA | M10168 | RETNG RING, EXT, 8.50 SHAFT, 0.187 THK |
| 16 | 2.00 | EA | S02-1018-010 | WIPER, 8.997 ID x 9.501 OD x 0.151 SH |
| 17 | 2.00 | EA | M10249 | BRG, BALL, DEEP GROOVE |
| 18 | 2.00 | EA | M10247 | RETNG RING, INT, 13.75 BORE, 0.187 THK |
| 19 | 2.00 | EA | M02-1041-010 | BRG, PLAIN, 9.00 x 9.187 x 0.75 |
| 20 | 8.00 | EA | M12-1000-010 | GREASE NIPPLE, 1/8 NPT, STRAIGHT |
| 21 | 12.00 | EA | SH-0375NC-0100-W | CAPSCR, HEX SOC HD, 3/8-16UNC x 1.00 |
| 22 | 12.00 | EA | LW-0375-IT | LOCKWASHER, 3/8 INT TOOTH |
| 23A | 4.00 | EA | SH-0750NC-0100-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 1.00, WI |
| 23B | 4.00 | EA | SH-0750NC-0125-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 1.25, W |
| 25 | 8.00 | PAIR | LW-0750-NL | LOCKWASHER, 3/4 NORD-LOCK |
| 29 | 2.00 | EA | LN-1000NC-GR8 | LOCKNUT, 1-8UNC, GR8, STOVER |
| 30 | 1.00 | EA | DT13643 | RING, STOP, ACTUATOR, LWCV, 8.45 IN |
| 31 | 2.00 | EA | FW-1000-A | WASHER, F, 1, PLAIN, TYPE A |
| 34 | 8.00 | EA | BH-0375NC-0075 | CAPSCR, BUTTON HD SOC, 3/8-16UNC x 0.75 |
| 36 | 84.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 37 | 20.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 47 | 1.00 | EA | AY12222 | GUARD ASSY, ACTUATOR, LWCV, 8.45 IN |
| 48 | 2.00 | EA | DT13686 | TUBE ASSY, LWCV, 8.45 IN |
| 49 | 2.00 | EA | H15-090109B-06 | PLUG, SOC HEX, 3/8 ORB |
| 50 | 4.00 | EA | H15-070220-08-06 | ELL 90°, MALE 1/2 JIC, MALE 3/8 ORB |
| 52 | 1.00 | EA | AY14043 | KIT, ANTI-ROTATION, LWCV, 8.45IN OD VLV |
| 53 | 16.00 | PAIR | LW-0375-NL | LOCKWASHER, 3/8 NORD-LOCK |
| 54 | 2.00 | EA | H15-140109P-02 | PLUG, SOC HEX, 1/8 NPT |
| 55 | 1.00 | EA | DT13685 | DEFLECTOR, MUD, LWCV, 8.45 IN |
| 56 | 4.00 | EA | HH-0375N C-0100-G R8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8 |
| 57 | 2.00 | EA | DT14262 | PLATE, STOP, LWCV ACTUATOR, 8.45 IN |
| | | | |
| Part: AY12221-1 | | | | |
| Description: ACTUATOR ASSY, LWCV, CDTL, 8.45 x 3.06 | | | | |
| Drawing ID: AY12221-1 Rev No: A | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | AY12221 | ACTUATOR ASSY, LWCV, CDTL, 8.45, HYD |
| 02 | 2.00 | EA | DT15105 | PINION, LWCV ACTUATOR |
| | | | |
| Part: AY12222 | | | | |
| | | | |
| Description: GUARD ASSY, ACTUATOR, LWCV, 8.45 IN | | | | |
| Drawing ID: AY12222 Rev No: A | | | | |
| | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 2.00 | EA | DT13644 | GUARD, CYLINDER, ACTUATOR, LWCV, 8.45 IN |
| 02 | 2.00 | EA | DT13645 | GUARD, HINGE PLATE, LWCV, 8.45 IN |
| 03 | 8.00 | EA | 1006-038-150 | PIN, 0.38 DIA, 1.50 LG, HEAD/R |
| 04 | 4.00 | EA | M24-2000-010 | SAFETY PIN |
| 05 | 16.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 06 | 6.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 07 | 2.00 | EA | DT13399 | BUMPER, GUARD, LWCV |
| 08 | 4.00 | EA | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER |
| 09 | 4.00 | EA | FW-0250-A | WASHER, F, 1/4, PLAIN, TYPE A |
| 10 | 4.00 | EA | BH-0250NC-0050 | CAPSCR, BUTTON SOC HD, 1/4-20UNC x 0.50 |
| 11 | 4.00 | EA | M24-3001-010 | COTTER PIN, 1/8 x 1.00 |
| | | | |
| Part: AY12341-1 | | | | |
| Description: KIT, INTERFACE, LWCV, 24V, 8.45 IN | | | | |
| Drawing ID: AY12341-1 Rev No: B | | | | |
| | | | |
| Item | Qty | Units | Part ID | Description |
| 04 | 1.00 | EA | F451JSJ7080808-36.00-X-32.93 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 36.00 |
| 05 | 1.00 | EA | F451JSJS080808-37.3-X-34.5 | HOSE ASSY, 1/2, SWV STR, SWV STR, 37.3 |
| 10 | 5.00 | EA | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB |
| 16 | 0.00 | EA | AY12221 | ACTUATOR ASSY, LWCV, CDTL, 8.45, HYD |
| 17 | 3.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 18 | 4.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 19 | 1.00 | EA | H10255 | VLV, HYD, CBAL, 3:1 RATIO, SAE-8, D05 |
| 20 | 1.00 | EA | F451JSJ9080808-43.25-X-40.5 | HOSE ASSY, 1/2, SWV STR, 90 SHT, 43.25 |
| 21 | 1.00 | EA | F451JSJ9080808-41 -X-38.25 | HOSE ASSY, 1/2, SWV STR, 90° SHT, 41 |
| 28 | 2.00 | EA | HH-0312NC-0175-GR8-W | CAPSCR, HEX HD, 5/16-18UNC x 1.75, GR8,W |
| 29 | 1.00 | EA | H25-1005-010 | CLAMP, DOUBLE, 3/4 IN DIA |
| 32 | 2.00 | EA | F451JSJ7080808-92.57-X-89.5 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 92.57 |
| 33 | 3.00 | EA | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB |
| 34 | 1.00 | EA | H15-520221-08 | ELL 90°, MALE 1/2 ORFS, FEM SWV 1/2 ORFS |
| 36 | 1.00 | EA | H10252 | VLV, HYD, PRESSURE REDUCING, SAND, D03 |
| 38 | 15.00 | FT | E03-1023-010 | CABLE, 4 C #16 AWG, EXANE, 600V |
| 39 | 2.00 | EA | E04-2002-010 | STRAIN RELIEF, 1/2 NPT, 0.375 – 0.500 |
| 40B | 1.00 | EA | H10059 | VLV, HYD, DIR, 3 POS, 4 WAY, 24V, D03 |
| 41B | 4.00 | EA | H13-1036-588 | THREADED ROD, 10-24 x 5.88 IN LG |
| 42 | 4.00 | EA | H13-1035-01A | STUDNUT, 10 – 24 |
| 46 | 8.00 | EA | E03-2000-010 | CABLE TIE, 13.4 IN LG, 120 LB |
| 49 | 1.00 | EA | H07-1010-030 | CHECK VALVE |
| R01 | 1.00 | EA | 1028-XXX | CHART, TOOL JOINT CLAMP |
| R02 | 1.00 | EA | H12-1002-010 | MANIFOLD, TAP-IN, D03 SAE |
| R03 | 2.00 | EA | H22-1000-010 | TEST STATION, #4 SAE |
| REF | 1.00 | EA | SC10046 | SCHEDULE, MAINTENANCE, LWCV |
| REF | 1.00 | EA | SC10048-1 | SCHEMATIC, 8.45in LWCV, NON-INT, 120 VAC |
| | | | |
| Part: AY12585 | | | | |
| Description: BLOWER ASSY, 575V, 15HP-ELM | | | | |
| Drawing ID: AY12585 Rev No: B | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | P10052 | BLOWER, 15 HP |
| 01A | 0.00 | EA | E01-1016-030 | MOTOR, AC, 15 HP, 575V, 3600 RPM |
| 01B | 0.00 | EA | P10026-IMP | BLOWER IMPELLER |
| 02 | 1.00 | EA | DT11405 | DUCTING, INTAKE, BLOWER ASSY |
| 03 | 1.00 | EA | DT12230 | ACCESS PLATE |
| 04 | 8.00 | EA | HH-0375NC-0075-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 0.75, GR8 |
| 04A | 8.00 | EA | FW-0375-A | WASHER, F, 3/8, PLAIN, TYPE A |
| 05 | 8.00 | EA | LN-0375NC-GR8 | LOCKNUT, 3/8-16UNC, GR8, STOVER |
| 06 | 3.00 | EA | SH-0750NC-0550-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 5.50, W |
| 07 | 1.00 | EA | P08-1003-010 | BREATHER/DRAIN, 1/2 NPT, MALE |
| 08 | 50.00 | IN | S07-1001-010 | WEATHERSTRIP |
| 09 | 3.00 | EA | LW-0750-ET | LOCKWASHER, 3/4 EXTERNAL TOOTH |
| 11 | 1.00 | EA | DT11426 | DUCTING, ELBOW, MOTOR |
| 12 | 1.00 | EA | F10-1000-010 | NIPPLE 2 NPT KING |
| 13 | 4.00 | EA | HH-0500NC-0150-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8, W |
| 14 | 4.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| 15 | 32.00 | IN | X10384 | NEOPRENE, CLOTH INSERTED, 1/8 X 3.50 |
| 16 | 2.00 | EA | M10085 | CLAMP, HOSE, GEAR-TYPE, 9.38-12.25 |
| 17 | 1.00 | EA | AY11497 | BLOWER MOTOR SUPPORT ASSY |
| 18 | 3.00 | EA | LN-0750NC-GR8 | LOCKNUT, 3/4-10UNC, GR8, STOVER |
| R02 | 1.00 | EA | F07-1024-010 | PLUG, 2 NPT, CI 125#, HOLLOW SQ HD |
| | | | |
| Part: AY13025-06 | | | | |
| Description: LWCV ASSY, CDTL, REM ACT, 6 5/8 REG,H2S | | | | |
| Drawing ID: AY13205-01 Rev No: A | | | | |
| Item | Qty | Units | Part ID | Eng ID |
| 01 | 1.00 | EA | AY12221-1 | 2 |
| 02 | 1.00 | EA | AY12341-1 | 2 |
| 03 | 1.00 | EA | R10316 | |
| 04 | 1.00 | EA | 593-40-0 | 0 |
| 05 | 1.00 | EA | AY10905 | VSA |
| 06 | 1.00 | EA | AY14260 | 0 |
| Part: AY13428 | | | | |
| Description: KIT, SKID MOUNT, TRNBKL, TR | | | | |
| Drawing ID: AY13428 Rev No: 0 | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | DT11294 | LUG, SKID MOUNT, TRNBKL, TR |
| 02 | 1.00 | EA | 1006-175-575 | PIN, 1.747 DIA, 5.75 LG, HEAD/ |
| 03 | 1.00 | FT | M10022 | WIRE ROPE, 1/8, STAINLESS, 7 X 19 |
| 04 | 2.00 | EA | M19-3009-010 | FERRULE, 1/8, OVAL, ALUMINIUM |
| 05 | 1.00 | EA | M10241 | FERRULE, 1/8, STOP, ALUMINIUM |
| 06 | 1.00 | EA | HH-0500NC-0250-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 2.50, GR8, W |
| 07 | 1.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| 08 | 1.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 09 | 2.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| Part: AY14043 | | | | |
| Description: KIT, ANTI-ROTATION, LWCV, 8.45IN OD VLV | | | | |
| Drawing ID: AY14043 Rev No: B | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | DT16104 | BRACKET, ANTI-ROTATION, LWCV, 4IN ACT |
| 02 | 4.00 | EA | SH-0375NC-0100-W | CAPSCR, HEX SOC HD, 3/8-16UNC x 1.00 |
| 03 | 4.00 | EA | LW-0375-IT | LOCKWASHER, 3/8 INT TOOTH |
| 04 | 1.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 05 | 2.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| | | | |
| Part: AY14260 | | | | |
| Description: KIT, ANTI-ROTATION, LWCV, 750T | | | | |
| Drawing ID: AY14260 Rev No: A | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | DT16714 | BRACKET, ANTI-ROTATION, LWCV, 750T |
| 02 | 4.00 | EA | SH-0375NC-0100-W | CAPSCR, HEX SOC HD, 3/8-16UNC x 1.00 |
| 03 | 4.00 | EA | LW-0375-IT | LOCKWASHER, 3/8 INT TOOTH |
| 04 | 1.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 05 | 2.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 06 | 4.00 | EA | FW-0375-A | WASHER, F, 3/8, PLAIN, TYPE A |
| 07 | 8.00 | EA | DT17025 | SHIM, ANTI ROTATION |
| | | | |
| Part: AY14619 | | | | |
| Description: CROWN HANGER ASSY, SAIPEM RIG 5861 | | | | |
| Drawing ID: AY14619 Rev No: 0 | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 2.00 | EA | DT16931 | PLATE, CROWN HANGER, SAIPEM RIG 5861 |
| 02 | 1.00 | EA | 850-11-0 | PIN, HANGER HARPOON, 3.00 DIA x 13.25 |
| 03 | 1.00 | EA | 1011-600-697 | TRUNNION, 6.00 x 6.94 |
| 04 | 4.00 | EA | DT14116 | SAFETY SLING PIN PTG |
| 05 | 2.00 | EA | DT16944 | SLING, 7/8, 183 LG, SPELTER SCKT |
| 06 | 1.00 | EA | DT16948 | PLATE, BEARING, CH, CLAMP STYLE |
| 07 | 1.00 | EA | DT16947 | PLATE, BEARING, CH, CLAMP STYLE |
| 08 | 2.00 | EA | 896-88-0-700 | SPACER, 6.97 LG, CROWN HANGER |
| 09 | 1.00 | EA | 1022-038-96 | SLING, 3/8, 96 LG, CLOSED LOOP |
| 10 | 2.00 | EA | M19-2006-010 | SHACKLE, ANCHOR BOLT TYPE, 5/8, GALV |
| 11 | 2.00 | EA | TR-1250NC-01200-B7 | THRDED ROD, 1 1/4-7UNC x 12.00, B7 |
| 12 | 4.00 | EA | HH-0500NC-0400-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 4.00, GR8, W |
| 13 | 4.00 | EA | LN-1250NC-GR8 | QLOCKNUT, 1 1/4-7UNC, GR8, STOVER |
| 14 | 4.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| 15 | 12.00 | FT | M10022 | WIRE ROPE, 1/8, STAINLESS, 7 X 19 |
| 16 | 16.00 | EA | M19-3009-010 | FERRULE, 1/8, OVAL, ALUMINIUM |
| 17 | 4.00 | EA | M10241 | FERRULE, 1/8, STOP, ALUMINIUM |
| 18 | 6.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 19 | 6.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 20 | 4.00 | EA | HH-0250NC-0200-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 2.00, GR8, W |
| 21 | 4.00 | EA | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER |
| 22 | 2.00 | EA | HN-1000NC-GR8 | HEX NUT, 1-8UNC, GR8 |
| 23 | 2.00 | EA | DT10101 | CAPSCR, FRAME ADJ, 1-8UNC x 4.34 |
| 24 | 1.00 | EA | 1027-375-1200-4 | PLATE, BEARING, 3.75 x 12.00 |
| 25 | 1.00 | EA | 1027-425-1200-4 | PLATE, BEARING, 4.25 x 12.00 |
| | | | |
| | | | |
| Part: AY14620 | | | | |
| Description: TORQUE REACTION ASSY, SAIPEM RIG 5861 | | | | |
| Drawing ID: AY14620 Rev No: 0 | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | DT12252 | GIRT, TR, W10 x 68 x 372.00 LG, W/HOLES |
| 02 | 2.00 | EA | DT11916 | PLATE, CLAMP, TR, 11.50 x 40.00 W/HOOK |
| 03 | 2.00 | EA | DT11917 | PLATE, CLAMP, 11.50 x 40.00, SLOTTED |
| 04 | 2.00 | EA | DT11082 | PLATE, CLAMP, TR, 11.50 x 23.00 W/LUGS |
| 05 | 2.00 | EA | DT11081 | PLATE, CLAMP, 11.50 x 23.00, TR |
| 06 | 3.00 | EA | 1018-250-913-A | TRNBKL, BDY, 2.50 A/F, 9.13 L |
| 07 | 3.00 | EA | AY11498-0875-RH | TRNBKL, EYE, 8.75 LG, RH, W/BEARING |
| 08 | 3.00 | EA | DT14828-0875-LH | TRNBKL, EYE, 1 3/4, LH, 8.75, ACME |
| 09 | 3.00 | EA | AY13428 | KIT, SKID MOUNT, TRNBKL, TR |
| 10 | 1.00 | EA | DT11301 | PLATE, CLAMP, SKID MOUNT, TRNBKL, TR |
| 11 | 3.00 | EA | AY11446 | TR CLAMP ASSY, PINNED |
| 13 | 3.00 | EA | HN-1750ACME-2G-RH | HEX NUT, 1 3/4-4 ACME, 2G, RH |
| 14 | 3.00 | EA | HN-1750ACME-2G-LH | HEX NUT, 1 3/4-4 ACME, 2G, LH |
| 15 | 3.00 | EA | 1018-250-1313-A | TRNBKL, BDY, 2.50 A/F, 13.13 L |
| 16 | 12.00 | EA | M12-1006-010 | GREASE NIPPLE, 1/8 NPT, 45 DEGREE |
| 19 | 8.00 | EA | HH-1000NC-0300-B7-G-W | CAPSCR, HEX HD, 1-8UNC x 3.00, B7, GAL,W |
| 20 | 40.00 | EA | LN-1000NC-2H-ANCO-G | HEX NUT, 1-8UNC, 2H, ANCO, GALV |
| 21 | 16.00 | EA | TR-1000NC-01800-B7-G | THRDED ROD, 1-8UNC x 18.00, B7, GALV |
| 22 | 4.00 | EA | 1006-150-413 | PIN, 1.50 DIA, 4.13 LG, HEAD/R |
| 23 | 40.00 | EA | FW-1000-B-W-G | WASHER, F, 1, PLAIN, TYPE B, WIDE, GALV. |
| 24 | 4.00 | EA | HH-0500NC-0250-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 2.50, GR8, W |
| 26 | 4.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| | | | |
| Part: TD-J10794 | | | | |
| Description: TOP DRIVE, RIG SPECIFIC INTERFACE | | | | |
| Drawing ID: TD-1275AC Rev No: 0 | | | | |
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | AY10948 | GOOSENECK ASSY, 4 IN BORE, 7500 PSI WP |
| 02 | 1.00 | EA | AY10952 | BLOCK INTERFACE ASSY, 750 TON, 81.9 LG |
| 03 | 1.00 | EA | AY12585 | BLOWER ASSY, 575V, 15HP-ELM |
| 04 | 1.00 | EA | AY10008 | GUIDE RUNNER ASSY, 0 OFFSET, 102 LG |
| 05 | 1.00 | EA | AY13205-06 | LWCV ASSY, CDTL, REM ACT, 6 5/8 REG, H2S |
| 06 | 1.00 | EA | DT11389-596 | NAME PLATE, TOP DRIVE SERIAL NO. 596 |
