| MOTOR POWER | | | |
| CONTROL POWER | | | |
| Part: AY11384-16-1 | | | |
| Description: SERVICE LOOP,EL,DUAL,DC PWR, 4IN, 80 FT | | | |
| Drawing ID: AY11384-X-Y Rev No: AB | | | |
| | | |
| Item | Part ID | Description | |
| 01 | DT12140 | HOSE END, POWER, 4 IN, DUAL LOOP | |
| 02 | DT12142 | COVER PLATE, MCT, 4 IN, HOSE END | |
| 03 | E10762 | FRAME, MCT, ROUND, 90mm X 90mm | |
| 04 | E10770-80 | HOSE, 4 IN, HD MARINE EXHAUST, 80 FT LG | |
| 05A | F05-1016-010 | DOUBLE BOLT CLAMP 4 IN | |
| 05B | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER | |
| 06 | E16-2000-010 | LUG, 2/0 AWG, 1 HOLE, 1/2 BOLT | |
| 07 | SH-0500NC-0175-SS | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.75 | |
| 08 | LN-0500NC-SS | LOCKNUT, 1/2-13UNC, SS | |
| 09 | HH-0500NC-0150-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8, W | |
| 10 | HN-0500NC-GR8 | HEX NUT, 1/2-13UNC, GR8 | |
| 13 | F07-1005-010 | STREET ELL 90°, 2 NPT, MI 150# | |
| 14 | F10-1000-010 | NIPPLE 2 NPT KING | |
| 15A | P10050 | HOSE, AIR, 2, BLK/GRN, 150 PSI | |
| 15B | F05-1005-010 | CLAMP, AIR HOSE, 2 | |
| 16 | 823-29-0 | STREET ELBOW, 2, w/SCREEN | |
| 17 | 669-18-0 | SERIAL NUMBER PLATE, ELECT SERVICE LOOP | |
| 18 | DS-U-4-312 | SCREW, DRIVE, U-TYPE, #4 x 0.312 LG | |
| 19 | 1006-100-375 | PIN, 1.00 DIA, 3.75 LG, HEAD/R | |
| 20 | HH-0250NC-0150-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 1.50, GR8, W | |
| 21 | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER | |
| 22A | E16-2008-010 | LUG, 500 MCM, 1 HOLE, 5/8 BOLT | |
| 22B | E04-2024-010 | STRAIN RELIEF, 1 1/2 NPT, 1.000 – 1.187 | |
| 22C | E04-5050-010 | LOCKNUT, CONDUIT FTG, 1 1/2 NPT | |
| 22C | E04-2029-010 | SEALING RING, 1 1/2 NPT | |
| 22E | E03-1002-010 | CABLE, 1 C/444 MCM, 2000V, GENERIC | |
| 23A | E16-2008-010 | LUG, 500 MCM, 1 HOLE, 5/8 BOLT | |
| 23B | E04-2024-010 | STRAIN RELIEF, 1 1/2 NPT, 1.000 – 1.187 | |
| 23C | E04-5050-010 | LOCKNUT, CONDUIT FTG, 1 1/2 NPT | |
| 23D | E04-2029-010 | SEALING RING, 1 1/2 NPT | |
| 24 | E03-1005-010 | CABLE, 1 C #2/0 AWG, 2000V, GENERIC | |
| 25 | E10768 | MODULE, MCT, 120mm X 10mm STRIP | |
| 26 | E10420 | MODULE, MCT, 40mm, 22mm-32mm | |
| 27 | E22-1022-010 | CABLE GRIP, OFFSET EYE, 1.00 – 1.24 | |
| 28 | E22-1023-010 | CABLE GRIP, OFFSET EYE, 0.75 – 0.99 | |
| REF | C10064 | HEAT SHRINK, 1 1/2 IN, RED | |
| REF | C10069 | HEAT SHRINK, 1 1/2 IN, CLEAR | |
| REF | C10063 | HEAT SHRINK, 1 1/2 IN, BLACK | |
| | | |
| Part: AY11385-20-13 | | | |
| | | |
| Description: SERVICE LOOP, EL, DUAL, DC CONTROL, 4IN | | | |
| Drawing ID: AY11385-X-Y Rev No: AP | | | |
| | | |
| Item | Part ID | Description | |
| 01 | DT12141 | HOSE END, CONTROL, 4 IN, DUAL LOOP | |
| 02 | DT12142 | COVER PLATE, MCT, 4 IN, HOSE END | |
| 03 | E10762 | FRAME, MCT, ROUND, 90mm X 90mm | |
| 04 | E10770-100 | HOSE, 4 IN, HD MARINE EXHAUST, 100 FT LG | |
| 05A | F05-1016-010 | DOUBLE BOLT CLAMP 4 IN | |
| 05B | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER | |
| 07 | HH-0500NC-0150-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8, W | |
| 08 | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER | |
| 11 | 669-18-0 | SERIAL NUMBER PLATE, ELECT SERVICE LOOP | |
| 12 | DS-U-4-312 | SCREW, DRIVE, U-TYPE, #4 x 0.312 LG | |
| 14 | 1006-100-375 | PIN, 1.00 DIA, 3.75 LG, HEAD/R | |
| 15 | HH-0250NC-0150-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 1.50, GR8, W | |
| 16 | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER | |
| 17 | H15-3007-08-08 | HOSE FTG, STR, 1/2, FEM SWV 1/2 ORFS | |
| 18 | H15-520109-08 | PLUG, HEX HD, 1/2 ORFS | |
| 19 | H16-1301-08 | HOSE, HP SAE 100R2, 1/2, 3500 psi | |
| 21 | E10197 | CABLE, 3 C #6 AWG, PEND, POLYRAD XT,600V | |
| 22A | E11059 | CABLE, 7 C #10 AWG, PENDANT, POLYRAD SFL | |
| 22B | E10196 | CABLE, 4 C #8 AWG, PEND,POLYRAD XT,600V | |
| 23 | E11302 | CABLE, 10 C #12 AWG, PERFECT-A-FLEX,600V | |
| 24 | E03-1035-030 | CABLE, 1 TSP #20 AWG, BRAIDED ARM | |
| 25 | H16-1836-10 | HOSE, 836, 5/8, 250 psi | |
| 26 | E10007 | MODULE, MCT, 30mm, 12mm-25mm | |
| 33 | E22-1023-010 | CABLE GRIP, OFFSET EYE, 0.75 – 0.99 | |
| 35 | E10816 | CABLE GRIP, RISER SUPPORT, 0.4in-0.61in | |
| 58 | E10499 | CABLE TIE, 8.0 IN LG, 18 LB | |
| | | |
| Part: AY11408 | | | |
| Description: GOOSENECK ASSY, 3 BORE, NO UWCV, W/O BRK | | | |
| Drawing ID: AY11408 Rev No: A | | | |
| | | |
| Item | Part ID | Description | |
| 01 | DT12110-1 | MUDLINE, GOOSENECK, 3 BORE, 5000 WP | |
| 02 | DT12213 | MUDLINE, PIPE, 4 NOM,90 ,3 BORE, 5000 WP | |
| 04 | DT12197 | ELL, MUDLINE | |
| 05 | DT11361 | SPLIT RING | |
| 06 | S01-1353-01N | O-RING | |
| 07 | 735-23-0 | PLUG, BLANKING ASSY, 4 3/4 | |
| 08 | SH-0750NC-0150-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 1.50 | |
| 09 | F04-1000-040 | UNION, SEAL, 4 IN, FIG 1002 | |
| | | |
| Part: AY11446 | | | |
| Description: TR CLAMP ASSY, PINNED | | | |
| Drawing ID: AY11446 Rev No: D | | | |
| | | |
| Item | Part ID | Description | |
| 01 | DT12253 | PLATE, LUG, PIV/PIN, TRNBKL, TR | |
| 02 | DT12251 | LUG, PIVOTING, TRNBKL, TR | |
| 03 | 850-72-0 | SAFETY SLING PIN PTG | |
| 04 | 1006-175-475 | PIN, 1.75 DIA, 4.75 LG, HEAD/R | |
| 05 | 1006-206-1350 | PIN, 2.06 DIA, 13.50 LG, HEAD/R | |
| 06 | DT12254 | PLATE, CLAMP, PIV/PIN, TRNBKL, TR | |
| 07 | HH-1000NC-0450-B7-G-W | CAPSCR, HEX HD, 1-8UNC x 4.50, B7, GAL,W | |
| 08 | FW-1000-A-G | WASHER, F, 1, PLAIN, TYPE A, GALV | |
| 09 | LN-1000NC-2H-ANCO-G | HEX NUT, 1-8UNC, 2H, ANCO, GALV | |
| 10 | M12-1000-010 | GREASE NIPPLE, 1/8 NPT, STRAIGHT | |
| 11 | M24-2001-010 | SAFETY PIN | |
| 12 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 13 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 14 | HH-0375NC-0225-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 2.25, GR8 | |
| 15 | LN-0375NC-GR8 | LOCKNUT, 3/8-16UNC, GR8, STOVER | |
| 16 | HH-0375NC-0250-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 2.50, GR8, W | |
| 17 | M10022 | WIRE ROPE, 1/8, STAINLESS, 7 X 19 | |
| 18 | M19-3009-010 | FERRULE, 1/8, OVAL, ALUMINIUM | |
| 19 | M10241 | FERRULE, 1/8, STOP, ALUMINIUM | |
| | | |
| Part: AY11498-1225-RH | | | |
| | | |
| Description: TRNBKL, EYE, 12.25 LG, RH, W/BEARING | | | |
| Drawing ID: AY11498-1225-RH Rev No: 0 | | | |
| | | |
| Item | Part ID | Description | |
| 01 | DT11291-1225-RH | TRNBKL, EYE, 1 3/4, RH, 12.25, ACME | |
| 02 | M04-1100-010 | BRG, PLAIN RADIAL /W SEALS | |
| 03 | M11-1019-010 | RETNG RING, INT | |
| 04 | M12-1006-010 | GREASE NIPPLE, 1/8 NPT, 45 DEGREE | |
| Part: AY11920-3 | | | |
| | | |
| Description: KIT, INTERFACE, LWCV, INTG, 24 VDC | | | |
| Drawing ID: AY11920-3 Rev No: K | | | |
| | | |
| Item | Part ID | Description | |
| 04 | F451JSJ1080808-34.85-X-32 | HOSE ASSY, 1/2, SWV STR, 90° LONG, 34.85 | |
| 05 | F451JSJS080808-34.8-X-32 | HOSE ASSY, 1/2, SWV STR, SWV STR, 34.8 | |
| 10 | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 16 | AY10782 | ACTUATOR ASSY, LWCV, CDTL, 7.75, HYD | |
| 17 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 18 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 19 | H10255 | VLV, HYD, CBAL, 3:1 RATIO, SAE-8, D05 | |
| 20 | F451JSJ7080808-39.07-X-36 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 39.07 | |
| 21 | F451JSJ7080808-41.00-X-38.07 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 41.00 | |
| 28 | HH-0312NC-0175-GR8-W | CAPSCR, HEX HD, 5/16-18UNC x 1.75, GR8,W | |
| 29 | H25-1005-010 | CLAMP, DOUBLE, 3/4 IN DIA | |
| 31 | F451JSJ7080808-79.32-X-76.25 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 79.32 | |
| 32 | F451JSJ7080808-85.07-X-82 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 85.07 | |
| 33 | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 34 | H15-520221-08 | ELL 90°, MALE 1/2 ORFS, FEM SWV 1/2 ORFS | |
| 36 | H10252 | VLV, HYD, PRESSURE REDUCING, SAND, D03 | |
| 38 | E03-1023-010 | CABLE, 4 C #16 AWG, EXANE, 600V | |
| 39 | E04-2002-010 | STRAIN RELIEF, 1/2 NPT, 0.375 – 0.500 | |
| 40B | H10059 | VLV, HYD, DIR, 3 POS, 4 WAY, 24V, D03 | |
| 41B | H13-1036-588 | THREADED ROD, 10-24 x 5.88 IN LG | |
| 42 | H13-1035-01A | STUDNUT, 10 – 24 | |
| 46 | E03-2000-010 | CABLE TIE, 13.4 IN LG, 120 LB | |
| 49 | AY12658-2 | VALVE, CHECK, KIT, INTG MANIFOLD | |
| REF | SC10046 | SCHEDULE, MAINTENANCE, LWCV | |
| REF | SC10045-3 | SCHEMATIC, LWCV, INT MAN, 24 VDC | |
| REF | 1028-XXX | CHART, TOOL JOINT CLAMP | |
| Part: AY11948 | | | |
| | | |
| Description: BLOWER ASSY, GE752, 575V, 15HP-ELM | | | |
| Drawing ID: AY11948 Rev No: C | | | |
| | | |
| Item | Part ID | Description | |
| 01 | DT11336 | DUCT, INLET, GE 752 | |
| 02 | DT12494 | DUCTING, INTAKE, BLOWER ASSY | |
| 03 | DT12230 | ACCESS PLATE | |
| 04 | P10026 | BLOWER ASSY, 15 HP, 575V, W/ ELIMINATOR | |
| 04A | P10026-IMP | BLOWER IMPELLER | |
| 05 | X10384 | NEOPRENE, CLOTH INSERTED, 1/8 X 3.50 | |
| 06 | P08-1003-010 | BREATHER/DRAIN, 1/2 NPT, MALE | |
| 07 | S07-1001-010 | WEATHERSTRIP | |
| 08 | HH-0750NC-0350-GR8-W | CAPSCR, HEX HD, 3/4-10UNC x 3.50, GR8 | |
| 09 | HH-0500NC-0150-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8, W | |
| 10 | HH-0375NC-0075-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 0.75, GR8 | |
| 11 | LN-0750NC-GR8 | LOCKNUT, 3/4-10UNC, GR8, STOVER | |
| 12 | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER | |
| 13 | LN-0375NC-GR8 | LOCKNUT, 3/8-16UNC, GR8, STOVER | |
| 14 | LW-0750-ET | LOCKWASHER, 3/4 EXTERNAL TOOTH | |
| 15 | LW-0500-ET | LOCKWASHER, 1/2 EXTERNAL TOOTH | |
| 16 | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH | |
| 17 | F10-1000-010 | NIPPLE 2 NPT KING | |
| 18 | AY11497 | BLOWER MOTOR SUPPORT ASSY | |
| 19 | M10085 | CLAMP, HOSE, GEAR-TYPE, 9.38-12.25 | |
| 22 | F07-1005-010 | STREET ELL 90°, 2 NPT, MI 150# | |
| 23 | P10050 | HOSE, AIR, 2, BLK/GRN, 150 PSI | |
| 24 | F05-1005-010 | CLAMP, AIR HOSE, 2 | |
| 25 | P10038 | COUPLER, CAM & GRV FEMALE X 2 HOSE SHANK | |
| REF | M19-3007-010 | WIRE ROPE CRIMP | |
| REF | M21-2001-010 | WIRE ROPE, 3/16 | |
| | | |
| Part: AY12237 | | | |
| Description: GUARD ASSY, ACTUATOR, LWCV | | | |
| Drawing ID: AY12237 Rev No: 0 | | | |
| | | |
| Item | Part ID | Description | |
| 01 | DT13661 | GUARD, CYLINDER, ACTUATOR, LWCV | |
| 02 | DT13662 | GUARD, HINGE PLATE, ACTUATOR, LWCV | |
| 03 | 1006-038-150 | PIN, 0.38 DIA, 1.50 LG, HEAD/R | |
| 04 | M24-2000-010 | SAFETY PIN | |
| 05 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 06 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 07 | DT13399 | BUMPER, GUARD, LWCV | |
| 08 | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER | |
| 09 | FW-0250-A | WASHER, F, 1/4, PLAIN, TYPE A | |
| 10 | BH-0250NC-0075 | CAPSCR, BUTTON HD SOC, 1/4-20UNC x 0.75 | |
| 11 | M24-3001-010 | COTTER PIN, 1/8 x 1.00 | |
| | | |
| Part: AY13428 | | | |
| | | |
| Description: KIT, SKID MOUNT, TRNBKL, TR | | | |
| Drawing ID: AY13428 Rev No: 0 | | | |
| | | |
| Item | Part ID | Description | |
| 01 | DT11294 | LUG, SKID MOUNT, TRNBKL, TR | |
| 02 | 1006-175-575 | PIN, 1.747 DIA, 5.75 LG, HEAD/ | |
| 03 | M10022 | WIRE ROPE, 1/8, STAINLESS, 7 X 19 | |
| 04 | M19-3009-010 | FERRULE, 1/8, OVAL, ALUMINIUM | |
| 05 | M10241 | FERRULE, 1/8, STOP, ALUMINIUM | |
| 06 | HH-0500NC-0250-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 2.50, GR8, W | |
| 07 | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER | |
| 08 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 09 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| Part: AY13466 | | | |
| | | |
| Description: KIT, HYDRAULIC JUMPER–150FT | | | |
| Drawing ID: NO DRAWING Rev No: 0 | | | |
| Item | Part ID | Description | |
| 31 | H15-1027-010 | QUICK PRESS NIP, 3/4 BDY, FEM 3/4 NPT | |
| 32 | H15-1029-010 | QUICK PRESS NUT CPLER, FEM 3/4 NPT | |
| 33 | H15-1029-01A | PLUG, BRASS, QUICK CPLER, 3/4 | |
| 34 | H15-1027-01A | CAP, BRASS, QUICK CPLER, 3/4 | |
| 35 | H16-1471-12 | HOSE, HP, 3/4, 3125 psi | |
| 36 | H15-3100-12-12 | HOSE FTG, 3/4, MALE 3/4 NPT | |
| 37 | C10023 | SEALANT, HYDRAULIC | |
| | | |
| Part: AY14061-03 | | | |
| | | |
| Description: LWCV ACT, CDTL, REM ACT, 6 5/8 REG, 24V | | | |
| Eng ID: 1 Drawing ID: AY14061-X | |
| Item | Part ID | Description | |
| 01 | AY10782-500 | ACTUATOR ASSY, LWCV, CDTL, 1050 | |
| 02 | AY11920-3 | KIT, INTERFACE, LWCV, INTG, 24 VDC | |
| 03 | R10209 | LWCV, 6 5/8 REG BOX x NC 50, 33 LG, DUAL | |
| 04 | 593-37-0 | TJC ASSY, 7.63-8.38, FEMALE | |
| 05 | 593-44-0 | TJC ASSY, 7.63-8.38 – MALE HALF | |
| Part: AY14066 | | | |
| | | |
| Description: KIT, ANTI-ROTATION, LWCV, 500T | | | |
| | | |
| Drawing ID: AY14066 Rev No: C | | | |
| | | |
| Item | Part ID | Description | |
| 01 | DT16712 | BRACKET, ANTI-ROTATION, LWCV, 500T, 3IN | |
| 02 | SH-0375NC-0100-W | CAPSCR, HEX SOC HD, 3/8-16UNC x 1.00 | |
| 03 | LW-0375-IT | LOCKWASHER, 3/8 INT TOOTH | |
| 04 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 05 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 06 | FW-0375-A | WASHER, F, 3/8, PLAIN, TYPE A | |
| 07 | DT17025 | SHIM, ANTI ROTATION | |
| | | |
| Part: AY14868 | | | |
| Description: CROWN HANGER ASSEMBLY, CAROIL RIG 8 | | | |
| Drawing ID: AY14868 Rev No: 0 | | | |
| | | |
| Item | Part ID | Description | |
| 01 | DT17266 | PLATE, CROWN HANGER, CAROIL RIG 8 | |
| 02 | 1011-600-997 | TRUNNION, 6.00 x 9.94 | |
| 03 | 850-11-0 | PIN, HANGER HARPOON, 3.00 DIA x 13.25 | |
| 04 | DT14116 | SAFETY SLING PIN PTG | |
| 05 | DT17268 | SPACER, CROWN HANGER, 3 7/8 INCH | |
| 06 | 896-88-0-1000 | SPACER, 9.97 LG, CROWN HANGER | |
| 07 | 1000-088-47 | SLING, 7/8 | |
| 08 | 1022-038-96 | SLING, 3/8, 96 LG, CLOSED LOOP | |
| 09 | M19-2006-010 | SHACKLE, ANCHOR BOLT TYPE, 5/8, GALV | |
| 10 | TR-1500NC-01700-B7 | THREADED ROD, 1 1/2-6UNC x 17.00, B7 | |
| 11 | LN-1500NC-GR8 | LOCKNUT, 1 1/2-6 UNC, GR8, STOVER | |
| 12 | TR-1250NC-01600-B7 | THRDED ROD, 1 1/4-7UNC x 16.00, B7 | |
| 13 | LN-1250NC-GR8 | QLOCKNUT, 1 1/4-7UNC, GR8, STOVER | |
| 14 | HH-0500NC-0400-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 4.00, GR8, W | |
| 15 | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER | |
| 16 | M10022 | WIRE ROPE, 1/8, STAINLESS, 7 X 19 | |
| 17 | M19-3009-010 | FERRULE, 1/8, OVAL, ALUMINIUM | |
| 18 | M10241 | FERRULE, 1/8, STOP, ALUMINIUM | |
| 19 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 20 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 21 | HH-0250NC-0200-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 2.00, GR8, W | |
| 22 | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER | |
| | | |
| Part: AY14871 | | | |
| | | |
| Description: TORQUE REACTION ASSEMBLY, CAROIL RIG 8 | | | |
| Drawing ID: AY14871 Rev No: 0 | | | |
| | | |
| Item | Part ID | Description | |
| 01 | DT12256 | GIRT, TR, W10 x 68 x 324.00 LG, W/HOLES | |
| 02 | DT12014 | PLATE, CLAMP, TR, 11.50 x 31.00, W/HOOK | |
| 03 | DT12015 | PLATE, CLAMP, TR, 11.50 x 31.00 | |
| 04 | DT11082 | PLATE, CLAMP, TR, 11.50 x 23.00 W/LUGS | |
| 05 | DT11081 | PLATE, CLAMP, 11.50 x 23.00, TR | |
| 06 | 1018-250-1713-A | TRNBKL, BDY, 2.50 A/F, 17.13 L | |
| 07 | AY11498-1225-RH | TRNBKL, EYE, 12.25 LG, RH, W/BEARING | |
| 08 | DT14828-1225-LH | TRNBKL, EYE, 1 3/4, LH, 12.25, ACME | |
| 09 | AY13428 | KIT, SKID MOUNT, TRNBKL, TR | |
| 10 | DT11301 | PLATE, CLAMP, SKID MOUNT, TRNBKL, TR | |
| 11 | AY11446 | TR CLAMP ASSY, PINNED | |
| 12 | HN-1750ACME-2G-RH | HEX NUT, 1 3/4-4 ACME, 2G, RH | |
| 13 | HN-1750ACME-2G-LH | HEX NUT, 1 3/4-4 ACME, 2G, LH | |
| 14 | 1018-250-2213-A | TRNBKL, BDY, 2.50 A/F, 22.13 L | |
| 15 | M12-1006-010 | GREASE NIPPLE, 1/8 NPT, 45 DEGREE | |
| 16 | HH-1000NC-0300-B7-G-W | CAPSCR, HEX HD, 1-8UNC x 3.00, B7, GAL,W | |
| 17 | LN-1000NC-2H-ANCO-G | HEX NUT, 1-8UNC, 2H, ANCO, GALV | |
| 18 | TR-1000NC-01800-B7-G | THRDED ROD, 1-8UNC x 18.00, B7, GALV | |
| 19 | 1006-150-413 | PIN, 1.50 DIA, 4.13 LG, HEAD/R | |
| 20 | FW-1000-B-W-G | WASHER, F, 1, PLAIN, TYPE B, WIDE, GALV. | |
| 21 | HH-0500NC-0250-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 2.50, GR8, W | |
| 22 | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER | |
| 23 | TR-1000NC-01600-B7-G | THRDED ROD, 1-8UNC x 16.00, B7, GALV | |
| Part: TD-J11060 | | | |
| | | |
| Description: TOP DRIVE, RIG SPECIFIC INTERFACE | | | |
| | | |
| Drawing ID: TD-1050E500-2 Rev No: 0 | | | |
| | | |
| Item | Part ID | Description | |
| AY11948 | BLOWER ASSY, GE752, 575V, 15HP-ELM | |
| 01 | AY11408 | GOOSENECK ASSY, 3 BORE, NO UWCV, W/O BRK | |
| 02 | 753-08-5 | BLOCK INTERFACE ASSY, 500 TON, 75 | |
| 04 | AY10008 | GUIDE RUNNER ASSY, 0 OFFSET, 102 LG | |
| 05 | AY14061-03 | LWCV ACT, CDTL, REM ACT, 6 5/8 REG, 24V | |
| 06 | DT11389-489 | NAME PLATE, TOP DRIVE SERIAL NO. 489 | |
| | | |
| SUBSECTION 6B: TOP DRIVE |
| Assembly | Description | Drawing | Rev |
| 844-95-0 | J-BOX, MOTOR, 752, FLEX | 844-95-0 | J |
| AY10000 | ACTUATOR ASSY, BRAKE | AY10000 | B |
| AY10007 | MOTOR ASSY, DC, SH, 1130 HP | AY10007 | K |
| AY10009 | GEARCASE ASSY, 5.00:1, 350/500 TON | AY10009 | C |
| AY10011 | CYLINDER, HYDRAULIC, GRIPPER, 7.7in BORE | AY10011 | A |
| AY10013 | GAUGE PANEL ASSY | AY10013 | B |
| AY10014 | HOUSING & SPINDLE ASSY, 500 TON | AY10014 | D |
| AY10016-1 | LUBE PUMP ASSY, 2 HP, 575V | AY10016-X | B |
| AY10017 | LINK TILT ASSY, 1050 | AY10017 | J |
| AY10018 | LINK SUPPORT ASSY, 500 TON | AY10018 | B |
| AY10019 | HANDLER LOCK ASSY, PIN TYPE, 350/500 TON | AY10019 | C |
| AY10020 | MOTOR ASSY, DC, SH, 1130HP, 25T, BRK | AY10020 | D |
| AY10023 | ROTARY MANIFOLD ASSY, 500 TON, C/W HR,LS | AY10023 | F |
| AY10024 | BEARING INSTL KIT, RM, 500T | AY10024 | A |
| AY10025 | SPRING LIFT ASSY, RM, 350/500 T | AY10025 | A |
| AY10026 | TORQUE BOOST ASSY, 19 T PINION | AY10026 | B |
| AY10027 | TORQUE BOOST INSTL KIT, 350/500 TON | AY10027 | B |
| AY10030 | VIEW COVER ASSY, 350/500 TON, 5.00 : 1 | AY10030 | A |
| AY10031 | WASHPIPE ASSY, 3.00 BORE, 5 K WASHPIPE | AY10031 | A |
| AY10032 | SPARK ARRESTOR ASSY | AY10032 | A |
| AY10056 | FRAME BASE, INSTR ASSY, 27 NOM | AY10056-X | E |
| AY10062 | HOSE ASSY, HYD, TD, 5:1 RATIO | AY10062 | E |
| AY10063 | EXHAUST PLENUM ASSY, 752 MOTOR, 5.00:1 | AY10063 | E |
| AY10094 | BACK-UP WRENCH KIT, 500 TON | AY10094 | B |
| AY10095 | MOTOR/MAIN HOUSING KIT | AY10095 | B |
| AY10097 | LINK TILT KIT, 350/500/650/750 TON | AY10097 | 0 |
| AY10100 | GEARBOX/MOTOR ASSY, HANDLER ROTATE | AY10100 | A |
| AY10319 | MOTOR/GEARBOX ASSY, TB, 269 cc | AY10319 | A |
| AY10738 | SPRING LIFT KIT, RM, 500T | AY10738 | B |
| AY10887 | MANIFOLD ASSY, BLOCK, HYDRAULIC | AY10887 | 0 |
| AY10962 | MANIFOLD ASSY, ALUM, LUBE SYSTEM | AY10962 | E |
| AY10980 | J-BOX, TD PLC, DC/AC,DUAL FLEX | AY10980-X | F |
| AY10981 | BACKPAN ASSY, TD PLC,DUAL FLEX | AY10981 | E |
| AY10990 | DUAL REMOTE VLV ASSY, BRAKE ACTUATOR | AY10990 | 0 |
| AY11031 | MANIFOLD, BLOCK, HYD, 24V, LOCK PIN | AY11031 | D |
| AY11032 | FRAME, UPPER ASSY, 500, FLEX | AY11032 | D |
| AY11115 | BRAKE ASSY, 4 CALIPER, GE 752, ELM | AY11115 | C |
| AY11240 | BACK-UP WRENCH ASSY, 500 T, 43.25 STRK | AY11240 | F |
| AY11241 | POSITIONER ASSY, BUW, 1050, 43.25 | AY11241 | D |
| AY11250-500 | KIT, WARNING LABELS, TOP DRIVE, 500 TON | AY11250-500 | A |
| AY11414-3 | KIT, TOP DRIVE LABELS | AY11414-3 | 0 |
| AY11497 | BLOWER MOTOR SUPPORT ASSY | AY11497 | A |
| AY11597 | COOLER ASSY, RECOVERY AIR | AY11597 | B |
| AY11619 | KIT, J-BOX VIBRATION | AY11619 | B |
| AY11638-1 | LUBE SYSTEM KIT, SL, 5:1 | AY11638-1 | C |
| AY11792 | KIT, RETROFIT, OIL FILL EXTENDER | AY11792 | B |
| AY11925 | BONNET ASSY, SL, 3 IN, 5000 WP | AY11925 | E |
| AY11947 | GUARD ASSY, 350/500, 5.00:1, 600V | AY11947-X | D |
| AY11954-1 | TOP DRIVE, 1050E-500, 600V, 24V, ELM | AY11954-X | D |
| AY12129 | HEATER ASSY, GE752/761 MOTOR | AY12129 | 0 |
| AY12380-TD | KIT, SENSOR, ECM, TD | AY12380 & -1 | G |
| AY12382 | RTD ASSY, HYD VLV BANK,EQ COND.MONITOR’G | AY12382 | 0 |
| AY12414-1 | HIGH VIBRATION MOTOR J-BOX ASSEMBLY | AY12414-1 | B |
| AY12480 | QUILL INSTL KIT, 350/500 T0N, 3 BORE | AY12480 | A |
| AY12689 | DIE BLOCK ASSY, 5.75 – 9.00 | AY12689 | A |
| AY12690 | DIE BLOCK ASSY, 3.75 – 7.00 | AY12690 | A |
| AY12691 | DIE BLOCK ASSY, 2.50 – 5.75 | AY12691 | A |
| AY12692 | DIE BLOCK ASSY, 3.25 – 6.50 | AY12692 | A |
| AY12822-1 | ELEC LAYOUT,TD,DC,FLEX, NO MCC,5:1 RATIO | AY12822-X | C |
| AY12945 | FRAME ASSEMBLY, WELDED, BUW, 9in | AY12945 | B |
| | | |
| Part: 844-74-0 | | | |
| | | |
| Description: J-BOX, FEEDER BREAKER ASSY | | | |
| Drawing ID: 844-74-0 Rev No: F | | | |
| | | |
| Item | Part ID | Description | |
| 01 | E08-1044-010 | ENCLOSURE, 36 x 24 x 8, STEEL | |
| 02A | E10596 | CIRCUIT BKR, 1200A, 3P | |
| 02B | E10707 | HANDLE, CIRCUIT BKR | |
| 03 | E04-2024-010 | STRAIN RELIEF, 1 1/2 NPT, 1.000 – 1.187 | |
| 04 | E04-5050-010 | LOCKNUT, CONDUIT FTG, 1 1/2 NPT | |
| 05 | E04-2029-010 | SEALING RING, 1 1/2 NPT | |
| 06 | E16-2008-010 | LUG, 500 MCM, 1 HOLE, 5/8 BOLT | |
| 07 | DT11910 | MICA BOARD, 1/4 x 14.00 x 8.00 | |
| 08A | HH-0500NC-0250-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 2.50, GR8, W | |
| 08B | LW-0500-HS | LOCKWASHER, 1/2, HELICAL SPRING | |
| 08C | HN-0500NC-GR8 | HEX NUT, 1/2-13UNC, GR8 | |
| 09 | F10042 | CPLG, HALF, 3/8 NPT, CS, 3000# | |
| 10 | DT14387 | GASKET, J-BOX, FEEDER BREAKER | |
| 11A | HH-0250NC-0100-GR8 | CAPSCR, HEX HD, 1/4-20UNC x 1.00, GR8 | |
| 11B | FW-0250-A | WASHER, F, 1/4, PLAIN, TYPE A | |
| 11C | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER | |
| 9A | P08-1002-010 | BREATHER/DRAIN, 3/8 NPT, MALE | |
| REF | C10117 | PAINT, ENAMEL, GRAY, SPRAY, GLOSS | |
| | | |
| | | |
| Part: AY10000 | | | |
| Description: ACTUATOR ASSY, BRAKE | | | |
| Drawing ID: AY10000 Rev No: B | | | |
| | | |
| Item Qty Units Part ID Description | | | |
| | | |
| M23-1003-010 | | |
| 01 | 587-52-2 | | |
| 02 | 587-52-3 | | |
| 03 | 587-52-4 | | |
| 04 | 587-52-5 | | |
| 05 | H15-140139-04-02 | | |
| 06 | H15-140424-04-04 | | |
| 07 | H15-2001-04-02 | | |
| 08 | H18-1506-001 | | |
| 08A | S08-1005-010 | | |
| 09 | H22-1007-010 | | |
| 10 | H25-1000-010 | | |
| 11 | M16-1001-010 | | |
| 11A | M16-1001-01A | | |
| 12 | M16-1001-01B | | |
| 13 | M16-1001-01B | | |
| 14 | M16-1001-01C | | |
| 15 | M16-1002-010 | | |
| 15A | M16-1002-01A | | |
| 16 | P08-1000-010 | | |
| 17 | S01-1220-01N | | |
| 18 | HH-0375NC-0175-GR8-W | | |
| 19 | HH-0250NC-0300-GR8-W | | |
| 19A | FW-0250-A | | |
| 19A | LW-0250-ET | | |
| 20 | HH-0250NC-0050-GR8-W | | |
| 20A | LW-0250-ET | | |
| 20A | FW-0250-A | | |
| 21 | HN-0437NF-GR8 | | |
| 22 | LN-0375NC-GR8 | | |
| 23 | H15-140137-04-04 | | |
| 24 | H15-2000-04-04 | | |
| | | |
| Part: AY10007 | | | |
| | | |
| Description: MOTOR ASSY, DC, SH, 1130 HP | | | |
| Drawing ID: AY10007 Rev No: K | | | |
| | | |
| Item | Part ID | Description | |
| 01 | 685-12-0 | SEAL RING | |
| 02 | DT11970 | SEAL HOUSING | |
| 03 | 685-18-0 | COVER, BOTTOM INLET, GE 752 | |
| 04 | 685-20-0 | MOTOR, GE 752U SHUNT | |
| 04A | M01-1026-010 | PINION END BEARING | |
| 04B | M01-1024-010 | BALL BEARING COMM END | |
| 04C | E02-1003-01A | BRUSHES, 12 PER MOTOR | |
| 04D | E02-1003-01B | BRUSH HOLDER, GE 752 | |
| 05 | 685-22-0 | COVER, TOP, GE 752 | |
| 06 | 685-24-0 | OIL SHIELD | |
| 07 | 696-12-0 | ADAPTER MOUNTING PLATE AIR DUC | |
| 08 | AY12129 | HEATER ASSY, GE752/761 MOTOR | |
| 09 | E04-2000-010 | STRAIN RELIEF, 1/2 NPT, 0.250 – 0.375 | |
| 10 | H15-2000-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 NPT | |
| 11 | E10465 | NIP, 1/2 NPT X 3.00 LG, GALVANIZED | |
| 12 | M11-1025-010 | RETAINING RING, INTERNAL | |
| 13 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 14 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 15 | S01-1256-01V | O-RING | |
| 16 | S05-1017-010 | SEAL | |
| 17 | S07-1001-010 | WEATHERSTRIP | |
| 18 | HH-0500NC-0100-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.00, GR8, W | |
| 19 | FS-0625NC-0400 | CAPSCR, FLAT HD SOC, 5/8-11UNC x 4.00 | |
| 20 | FS-0500NC-0100 | CAPSCR, FLAT HD SOC, 1/2-13UNC x 1.00 | |
| 21 | FW-0500-A | WASHER, F, 1/2, PLAIN, TYPE A | |
| 22 | E08-1034-010 | OUTLET BODY, 2 5/8 OD, (2) 1/2 NPT HUBS | |
| 23 | E10455 | NIP, CLOSE, SCH 40, 1/2 NPT, GALVANIZED | |
| 24 | AY11149-752 | GREASE TUBE CONFIG, 752 MOTOR | |
| 25 | S10075 | SEAL | |
| 26 | HH-0500NC-0150-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8, W | |
| 27 | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER | |
| 28 | FW-0500-B-W | WASHER, F, 1/2, PLAIN, TYPE B, WIDE | |
| R01 | C10125 | ADHESIVE, SILICONE, RTV, HIGH TEMP, RED | |
| | | |
| Part: AY10009 | | | |
| Description: GEARCASE ASSY, 5.00:1,350/500 TON | | | |
| Drawing ID: AY10009 Rev No: C | | | |
| Item | Part ID | Description | |
| 01 | 587-47-0 | INJECTION LINE, LUBE, IDLER | |
| 02 | 681-18-0 | GEAR, BULL, 125T | |
| 03 | 681-19-0 | GEAR, IDLER, 31T | |
| 04 | 681-21-0 | IDLER AXLE | |
| 05 | 681-22-0 | PLATE, CARRIER, 350/500 STD RATIO | |
| 05a | 681-23-0 | SPACER, GEARCASE/IDLER GEAR | |
| 06 | 681-25-0 | RETAINER, BEARING | |
| 07 | 681-29-0 | KEY, 0.75 DRIVE HUB/SPINDLE | |
| 08 | 681-30-0 | GEARCASE, 5.00:1 RATIO, (SEE SPECS) | |
| 09 | 681-30-7 | DRAIN ASSEMBLY, GEARCASE | |
| 10 | 741-28-0 | DRIVE HUB | |
| 11 | E03-2000-010 | CABLE TIE, 13.4 IN LG, 120 LB | |
| 12 | H13-1005-010 | PLUG, MAGNETIC, 3/4 NPT | |
| 13 | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB | |
| 14 | H15-140109E-12 | PLUG, HEX HD, 3/4 NPT | |
| 15 | H15-520112-08 | CAP, 1/2 ORFS | |
| 16 | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 17 | M10117 | ROLLER BEARING | |
| 18 | M01-1020-010 | BRG, SPHER ROL | |
| 19 | M11-1028-010 | RETAINING RING, EXT | |
| 20 | M17-1001-010 | TAPER PIN | |
| 21 | M10035 | DOWEL PIN | |
| 22 | M17-1009-010 | DOWEL PIN, 3/8 x 1.50, GRD & HDNED | |
| 23 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 24 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 25 | M25-1001-010 | MAGNET, GEARCASE | |
| 26 | S01-1038-01V | O-RING | |
| 27 | S01-1229-01N | O-RING | |
| 28 | S01-1271-01N | O-RING | |
| 30 | SH-1000NC-0200-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.00 | |
| 31 | SH-0750NC-0200-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 2.00 | |
| 32 | SH-0500NC-0150-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.50 | |
| 33 | SH-0500NC-0125-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.25 | |
| 34 | SH-0375NC-0125-W | CAPSCR, HEX SOC HD, 3/8-16UNC x 1.25 | |
| 36 | SH-0250NC-0038-W | CAPSCR, HEX SOC HD, 1/4-20UNC x 0.38 | |
| 37 | BH-0500NC-0150 | CAPSCR, BUTTON HD SOC, 1/2-13UNC x 1.50 | |
| 38 | H15-140109E-08 | PLUG, HEX HD, 1/2 NPT | |
| Part: AY10011 | | | |
| Description: CYLINDER, HYDRAULIC, GRIPPER, 7.7in BORE | | | |
| Drawing ID: AY10011 Rev No: A | | | |
| Item | Part ID | Description | |
| 01 | 588-03-0 | BODY | |
| 02 | 588-04-1 | GLAND | |
| 03 | 588-04-2 | SPRING RETAINER | |
| 04 | 588-04-3 | PISTON | |
| 05 | 588-05-1 | MOUNTING ROD | |
| 06 | 588-05-2 | ROD | |
| 07 | 738-12-0 | VALVE, PO CHECK, ALUMINUM | |
| 07A | S01-1121-01N | O-RING | |
| 08 | 829-26-0 | HYDR TUBE, 1/2, BUW | |
| 09 | H15-090109B-12 | PLUG, SOC HEX, 3/4 ORB | |
| 10 | H15-090136-12-08 | REDUCER, MALE 3/4 ORB, FEMALE 1/2 ORB | |
| 11 | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 12 | H15-520220-08-12 | ELL 90°, MALE 1/2 ORFS, MALE 3/4 ORB | |
| 13 | H15-520429-08 | TEE, MALE 1/2 ORB BRANCH, MALE 1/2 ORFS | |
| 14 | H22-1000-010 | TEST STATION, #4 SAE | |
| 15 | M12-1000-010 | GREASE NIPPLE, 1/8 NPT, STRAIGHT | |
| 16 | M14-1000-010 | SPRING | |
| 17 | S05-1000-030 | PISTON SEAL | |
| 18 | S05-1001-010 | GLAND SEAL | |
| 19 | S05-1003-010 | SEAL | |
| 20 | S04-1002-020 | BRG RING, OUTSIDE | |
| 21 | S04-1003-020 | WIPER RING | |
| 22 | S04-1006-020 | BEARING RING, INSIDE | |
| 23 | S01-1345-01N | O-RING | |
| 24 | S01-1367-01N | O-RING | |
| 25 | SH-1000NC-0200-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.00 | |
| 26 | SH-0500NC-0225-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 2.25 | |
| | | |
| | | |
| Part: AY10013 | | | |
| Description: GAUGE PANEL ASSY | | | |
| Drawing ID: AY10013 Rev No: B | | | |
| Item | Part ID | Description | |
| 01 | 669-22-0-7 | LABELS, LUBE OIL PRESSURE | |
| 02 | 669-22-0-9 | LABELS, HYDRAULIC SYSTEM PRESSURE | |
| 03 | 669-22-0-11 | LABELS, HYDRAULIC SYSTEM RETURN … | |
| 04 | 694-49-0 | GAUGE PANEL, 3 HOLE | |
| 05 | N01-1003-010 | GAUGE, PRESSURE, 0 – 3000 PSI, SS | |
| 06 | N10185 | GAUGE, PRESSURE, 0 – 300 PSI, SS | |
| 07 | BH-6-32-0050-SS | CAPSCR, BUTTON HD SOC, 6-32 UNC x 0.50 | |
| 08 | LN-6-32NC-SS | LOCKNUT, # 6-32UNC, STAINLESS | |
| 09 | N10098 | GAUGE, PRESSURE, 0 – 1000 PSI, SS | |
| Part: AY10014 | | | |
| Description: HOUSING & SPINDLE ASSY, 500 TON | | | |
| Drawing ID: AY10014 Rev No: D | | | |
| Item | Part ID | Description | |
| 01 | 681-11-0 | UPPER BEARING SEAT | |
| 02A | 681-11-1-002 | SHIM, 0.002″ | |
| 02B | 681-11-1-003 | SHIM, 0.003″ | |
| 02C | 681-11-1-005 | SHIM, 0.005″ | |
| 02D | 681-11-1-010 | SHIM, 0.010″ | |
| 02E | 681-11-1-015 | SHIM, 0.015″ | |
| 02F | 681-11-1-020 | SHIM, 0.020″ | |
| 02G | 681-11-1-030 | SHIM, 0.030″ | |
| 02H | 681-11-1-060 | SHIM, 0.060″ | |
| 02J | 681-11-1-120 | SHIM, 0.120″ | |
| 02K | 681-11-1-125 | SHIM, 0.125″ | |
| 03 | 741-29-0 | SPINDLE, 500 TON | |
| 04 | 741-30-0 | MAIN HOUSING, 500 TON | |
| 05 | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB | |
| 06 | M01-1017-010 | BEARING CUP | |
| 07 | M01-1018-010 | BEARING CONE | |
| 08 | M01-1037-010 | THRUST BEARING | |
| 09 | M12-1003-010 | GREASE NIPPLE, 1/4-28 UNF, STRAIGHT | |
| 10 | S01-1473-01N | O-RING | |
| 11 | SH-0625NC-0250-W | CAPSCR, HEX SOC HD, 5/8-11UNC x 2.50 | |
| 12 | LW-0625-IT | LOCKWASHER, 5/8 INT TOOTH | |
| 13 | DT12217 | RETAINER, UPPER LINK | |
| 14 | SH-0750NC-0150-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 1.50 | |
| 15 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 16 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 17 | DT12240 | RETAINER, UPPER LINK | |
| 18 | SH-1000NC-0200-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.00 | |
| | | |
| Part: AY10016-1 | | | |
| Description: LUBE PUMP ASSY, 2 HP, 575V | | | |
| Drawing ID: AY10016-X Rev No: B | | | |
| Item | Part ID | Description | |
| 01 | E01-1029-010 | MOTOR, AC, 2 HP, 575V, 1750 RPM | |
| 02 | H01-1001-010 | LUBE PUMP | |
| 03 | M03-1000-020 | COUPLING HALF | |
| 04 | M03-1002-020 | COUPLING ELEMENT | |
| 05 | M18-1000-010 | BELL HOUSING | |
| 06 | HH-0375NC-0100-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8, | |
| 07 | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH | |
| 08 | HH-0375NC-0125-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.25, GR8, | |
| 09 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 10 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| | | |
| Part: AY10017 | | | |
| Description: LINK TILT ASSY, 1050 | | | |
| Drawing ID: AY10017 Rev No: J | | | |
| Item | Part ID | Description | |
| 01 | F451JSJ9080808-44.79-X-42 | HOSE ASSY, 1/2, SWV STR, 90° SHT, 44.79 | |
| 02 | F451JSJS080808-30.8-X-28 | HOSE ASSY, 1/2, SWV STR, SWV STR, 30.8 | |
| 03 | F451JSJS080808-28.75-X-26 | HOSE ASSY, 1/2, SWV STR, SWV STR, 28.75 | |
| 04 | F451JSJS080808-24.8-X-22 | HOSE ASSY, 1/2, SWV STR, SWV STR, 24.8 | |
| 05 | 594-02-7 | LUG, ELEVATOR LINK, 500 TON, 4.70 BORE | |
| 06 | DT16242 | PIVOT PIN, LINK TILT | |
| 07 | 594-07-0 | MANIFOLD, HYDRAULIC, LINK TILT | |
| 09 | DT12642 | CYLINDER, LINK TILT | |
| 09A | H10242 | CYLINDER SEAL KIT | |
| 09B | H19-1004-010 | CYLINDER ROD EYE | |
| 09C | M04-1000-020 | BEARING, PLAIN RADIAL | |
| 09D | M11-1022-010 | RETAINING RING, INTERNAL | |
| 09E | DT13000 | SEAL KIT INSTRUCTIONS | |
| 10 | 689-16-0 | MOUNT, FLOW DIVIDER, LINK TILT | |
| 13 | DT14062 | MOUNT, CYL, LINK TILT, 500T | |
| 14 | H04-1012-010 | FLOW DIVIDER | |
| 15 | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB | |
| 16 | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 17 | H15-520701-08 | ELL 90°, BULKHEAD, MALE 1/2 ORFS | |
| 18 | H15-520118-08 | LOCKNUT, BULKHEAD 1/2, 13/16-16UNF | |
| 22 | DT16240 | PIVOT PIN BOLT, LINK TILT | |
| 25 | SH-0312NC-0500-W | CAPSCR, HEX SOC HD, 5/16-18UNC x 5.00, W | |
| 26 | SH-0312NC-0100-W | CAPSCR, HEX SOC HD, 5/16-18UNC x 1.00 | |
| 27 | LN-0312NC-GR8 | LOCKNUT, 5/16-18UNC, GR8, STOVER | |
| 28 | HSN-0250NC-GR8 | HEX NUT, SLOTTED, 1/4-20UNC | |
| 29 | FW-0312-A | WASHER, F, 5/16, PLAIN, TYPE A | |
| 31 | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 32 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 33 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 35 | DT14408 | RETAINING NUT WDMT, LINK TILT | |
| 36 | M24-3010-010 | COTTER PIN, 3/16 x 3.00 | |
| 37 | H15-520320-08 | ELL 45°, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 38 | F451JSJ7080808-25.07-X-22 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 25.07 | |
| 39 | M10022 | WIRE ROPE, 1/8, STAINLESS, 7 X 19 | |
| 40 | M19-3009-010 | FERRULE, 1/8, OVAL, ALUMINIUM | |
| 41 | M10241 | FERRULE, 1/8, STOP, ALUMINIUM | |
| 42 | M24-3012-010 | COTTER PIN, 1/16 x 1 LG | |
| | | |
| Part: AY10018 | | | |
| Description: LINK SUPPORT ASSY, 500 TON | | | |
| Item | Part ID | Description | |
| 01 | 683-14-0 | PISTON, CBAL CYL, 2.50 DIA | |
| 02 | 683-15-0 | ROD, CBAL CYL, 1.75 DIA | |
| 03 | 683-16-0 | GLAND, CBALANCE CYL | |
| 04 | 743-10-0 | LINK SUPPORT | |
| 07 | 743-11-0 | LUG, RETAINING, LINK SUPPORT, 500 TON | |
| 08 | 743-13-0 | BRG RING,INSIDE WITH WIPER 16.92 DIA | |
| 10 | H15-520112-08 | CAP, 1/2 ORFS | |
| 11 | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 12 | M11-1006-010 | RETNG RING, INT | |
| 13 | M12-1000-010 | GREASE NIPPLE, 1/8 NPT, STRAIGHT | |
| 14 | S01-1141-01N | O-RING | |
| 15 | S02-1004-010 | WIPER | |
| 16 | S03-1008-010 | POLYPAK | |
| 19 | SS-10-24-0038 | SETSCREW, #10-24UNC x 0.38, CUP POINT | |
| 21 | M10022 | WIRE ROPE, 1/8, STAINLESS, 7 X 19 | |
| 22 | M19-3009-010 | FERRULE, 1/8, OVAL, ALUMINIUM | |
| 23 | DT15985 | LOWER PIN, LINK SUPPORT | |
| 24 | DT15984 | UPPER PIN, LINK SUPPORT | |
| 25 | DT15988 | BOLT, KEEPER HOLE, 1/2-13 X 2 LG, GR8-W | |
| 26 | HSN-0500NC-GR5 | HEX NUT, SLOTTED, 1/2-13UNC, GR5 | |
| 27 | M10190 | COTTER PIN, 1/8 X 1.25 | |
| 28 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 29 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| | | |
| Part: AY10019 | | | |
| Description: HANDLER LOCK ASSY, PIN TYPE, 350/500 TON | | | |
| Drawing ID: AY10019 Rev No: C | | | |
| Item | Part ID | Description | |
| 01 | 690-11-0 | HYDRAULIC CYLINDER | |
| 02 | 690-12-0 | LOCK PIN | |
| 03 | 920-19-0 | BRACKET, SENSOR, HANDLER LOCK | |
| 04 | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 06 | M12-1000-010 | GREASE NIPPLE, 1/8 NPT, STRAIGHT | |
| 07 | N02-1010-010 | PROX SENSOR, METAL BODY, N.C. CONTACTS, | |
| 08 | HH-0375NC-0100-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8, W | |
| 09 | LN-0375NC-GR8 | LOCKNUT, 3/8-16UNC, GR8, STOVER | |
| 10 | SS-0375NC-0050 | SETSCREW 3/8-16UNC x 0.50 CUP POINT | |
| 11 | HH-0750NC-1100-GR8-W | CAPSCR, HEX HD, 3/4-10UNC x 11.00, GR8-W | |
| 12 | LN-0750NC-GR8 | LOCKNUT, 3/4-10UNC, GR8, STOVER | |
| | | |
| Part: AY10020 | | | |
| Description: MOTOR ASSY, DC, SH, 1130HP, 25T, BRK | | | |
| Drawing ID: AY10020 Rev No: D | | | |
| Item | Part ID | Description | |
| 01 | AY11115 | BRAKE ASSY | |
| 02 | AY10007 | MOTOR ASSY, DC, SH, 1130 HP | |
| 03 | AY10063 | EXHAUST PLENUM ASSY, 752 MOTOR, 5.00:1 | |
| 04 | 685-10-0 | GEAR, PINION, 25T | |
| 04A | AY12048 | PUMP OFF KIT, PINION & HUB | |
| 05 | 686-12-0 | HUB, DISC BRAKE | |
| 06 | SS-0437NC-0075 | SETSCREW 7/16-14UNC x 0.75 FLAT POINT | |
| | | |
| | | |
| Part: AY10023 | | | |
| Description: ROTARY MANIFOLD ASSY, 500 TON, C/W HR,LS | | | |
| Drawing ID: AY10023 Rev No: F | | | |
| Item | Part ID | Description | |
| 01 | AY10018 | LINK SUPPORT ASSY, 500 TON | |
| 02 | AY10100 | GEARBOX/MOTOR ASSEMBLY | |
| 03 | 596-07-0 | KEY | |
| 04 | 682-28-0 | BRG RING, OUTSIDE | |
| 05 | 691-13-0 | PINION, 60T | |
| 06 | 691-14-0 | SPACER, PINION/MOTOR | |
| 07 | 691-15-0 | PINION RETAINER | |
| 08 | 691-16-0 | GUARD, PINION, HANDLER ROTATE | |
| 09 | 742-10-0 | OUTER SLEEVE | |
| 10 | 742-11-0 | GUIDE, GEARCASE | |
| 11 | 742-12-0 | PLATE, MTG, ROTARY MAN, 500 TON, FM | |
| 12 | DT12159 | INNER SLEEVE | |
| 13 | 742-14-0 | BRG RING, OUTSIDE | |
| 14 | 742-17-0 | THRUST WASHER | |
| 15 | 742-21-0 | PRESSURE PAD | |
| 16 | 751-10-0 | GEAR, HANDLER ROTATE, 376T | |
| 17 | 751-11-0 | FLANGE, MOUNTING, GEAR | |
| 18 | H15-090109B-06 | PLUG, SOC HEX, 3/8 ORB | |
| 19 | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB | |
| 20 | H15-520112-08 | CAP, 1/2 ORFS | |
| 21 | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 22 | M17-1005-010 | ROLL PIN, 1/2 x 1.75 | |
| 23 | M17-1006-010 | ROLL PIN, 1/2 x 1.00 | |
| 24 | M17-1007-010 | ROLL PIN, 1/2 x 1.25 | |
| 25 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 26 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 27 | S01-1111-01VS | O-RING | |
| 28 | S01-1279-01N | O-RING | |
| 29 | S03-1019-010 | POLYPAK | |
| 30 | S05-1033-010 | SEAL | |
| 31 | HH-0375NC-0100-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8, W | |
| 32 | HH-0375NC-0050-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 0.50, GR8, W | |
| 33 | SH-0750NC-0175-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 1.75 | |
| 34 | SH-0500NC-0300-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 3.00, W | |
| 35 | SH-0500NC-0200-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 2.00, W | |
| 36 | SH-0500NC-0075-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 0.75 | |
| 37 | SH-12MM-35MM-GR10-W | CAPSCR, HEX SOC HD, M12 x 35, GR10.9 | |
| 38 | SH-0375NC-0075-W | CAPSCR, HEX SOC HD, 3/8-16UNC x 0.75 | |
| 39 | LW-0500-NL | LOCKWASHER, 1/2 NORD-LOCK | |
| 40 | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH | |
| | | |
| Part: AY10024 | | | |
| Description: BEARING INSTL KIT, RM, 500T | | | |
| Drawing ID: AY10024 Rev No: A | | | |
| Item | Part ID | Description | |
| 01 | 742-18-0 | SLEEVE, SEAL/BEARING, RM | |
| 02 | 742-19-0 | SPLIT RING | |
| 03 | 742-20-0 | RETAINER, SPLIT RING | |
| 04 | 742-52-0 | BEARING INNER RACE | |
| 05 | H22-1002-010 | TEST STATION, #6 SAE | |
| 06 | M01-1036-010 | BEARING, NEEDLE ROLLER | |
| 07 | M11-1026-010 | RETAINING RING, INT | |
| 08 | M11-1027-010 | RETAINING RING, EXT | |
| 09 | S01-1275-01N | O-RING | |
| 10 | S01-5074-01N | O-RING | |
| 11 | S05-1035-010 | SEAL | |
| 12 | SH-0312NC-0100-W | CAPSCR, HEX SOC HD, 5/16-18UNC x 1.00 | |
| 13 | H15-090109B-06 | PLUG, SOC HEX, 3/8 ORB | |
| | | |
| Part: AY10025 | | | |
| Description: SPRING LIFT ASSY, RM, 350/500 T | | | |
| Drawing ID: AY10025 Rev No: A | | | |
| Item | Part ID | Description | |
| 01 | 744-10-0 | SCREW, SHOULDER, 3/4-10UNC x 6.60 | |
| 02 | FW-1000-A | WASHER, F, 1, PLAIN, TYPE A | |
| 03 | M14-1013-010 | SPRING, COMPRESSION, 1 ID X 2 OD X 5 L | |
| | | |
| Part: AY10026 | | | |
| Description: TORQUE BOOST ASSY, 19 T PINION | | | |
| Drawing ID: AY10026 Rev No: B | | | |
| Item | Part ID | Description | |
| 01 | AY10319 | MOTOR/GEARBOX ASSEMBLY | |
| 02 | 602-04-0 | PISTON/JAW CLUTCH, TORQUE BOOST | |
| 03 | 602-08 | RETAINER, UPPER SPRING | |
| 04 | 602-12-0 | GLAND, TORQUE BOOST | |
| 05 | 602-14 | SPLINED SHAFT | |
| 06 | 602-16-0 | GEAR, PINION, 19T | |
| 07 | 602-26-0 | SPRING | |
| 08 | 602-29-0 | SHAFT, GEAR/JAW CLUTCH, TB | |
| 09 | 602-30-0 | FLINGER, LOWER BEARING, TORQUE BOOST | |
| 10 | 602-31-0 | SPACER, BEARING/RETAINING RING. | |
| 11 | 602-32-0 | BELL HOUSING, TORQUE BOOST | |
| 12 | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB | |
| 13 | M01-1009-010 | BEARING, SPHERICAL ROLLER | |
| 14 | M01-1012-010 | TAPERED ROLLER BEARING | |
| 15 | M01-1023-010 | ROLLER BEARINGL | |
| 16 | M11-1002-010 | RETAINING RING, EXT | |
| 17 | M11-1007-010 | RETAINING RING, EXT | |
| 18 | M11-1020-010 | RETAINING RING, INT | |
| 19 | M14-1009-010 | SPRING | |
| 20 | M17-1002-010 | ROLL PIN, 3/8 x 0.75 | |
| 21 | M17-1003-010 | BALL, STEEL, 7/16 | |
| 22 | S01-1254-01N | O-RING | |
| 23 | S01-1266-01N | O-RING | |
| 24 | S05-1009-010 | SEAL | |
| 24A | S01-1157-01N | O-RING | |
| 25 | S05-1010-010 | SEAL | |
| 25A | S01-1159-01N | O-RING | |
| 26 | SH-0500NC-0175-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.75 | |
| 26A | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 26B | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 27 | SS-0625NC-0050 | SETSCREW 5/8-11UNC x 0.50 FLAT POINT | |
| 28 | LW-0500-IT | LOCKWASHER, 1/2 INT TOOTH | |
| 29 | S08-1031-010 | SEAL KIT, TORQUE BOOST, UNIVERSAL | |
| | | |
| Part: AY10027 | | | |
| Description: TORQUE BOOST INSTL KIT, 350/500 TON | | | |
| Drawing ID: AY10027 Rev No: B | | | |
| Item | Part ID | Description | |
| 01 | AY10026 | TORQUE BOOST ASSY | |
| 02 | S01-1259-01N | O-RING | |
| 03 | SH-1000NC-0175-W | CAPSCR, HEX SOC HD, 1-8UNC x 1.75, WIRED | |
| 04 | LW-1000-IT | LOCKWASHER, 1 INT TOOTH | |
| 05 | DT12150 | GASKET, COVER PLATE, TORQUE BOOST | |
| 06 | DT12149 | PLATE, COVER, TORQUE BOOST | |
| R01 | C10006 | SOLVENT, PARTS CLEANER | |
| R02 | H15-520220-08-10 | ELL 90°, MALE 1/2 ORFS, MALE 5/8 ORB | |
| R03 | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB | |
| R04 | H15-520220-04-04 | ELL 90°, MALE 1/4 ORFS, MALE 1/4 ORB | |
| R05 | H15-520112-08 | CAP, 1/2 ORFS | |
| R06 | H15-520112-04 | CAP, 1/4 ORFS | |
| R07 | H15-140109P-08 | PLUG, SOC HEX, 1/2 NPT | |
| | | |
| | | |
| Part: AY10030 | | | |
| | | |
| Description: VIEW COVER ASSY, 350/500 TON, 5.00 : 1 | | | |
| Drawing ID: AY10030 Rev No: A | | | |
| Item | Part ID | Description | |
| 01 | 741-12-6 | VIEWCOVER, GEARCASE, 26 x 6 | |
| 02 | 741-12-7 | RETAINER, VIEWCOVER, GEARCASE, 26 x 6 | |
| 03 | 741-12-8 | GASKET, VIEWCOVER, GEARCASE, 26 x 6 | |
| 04 | HH-0375NC-0100-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8, W | |
| 05 | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH | |
| 06 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 07 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| | | |
| Part: AY10031 | | | |
| Description: WASHPIPE ASSY, 3.00 BORE, 5 K WASHPIPE | | | |
| Drawing ID: AY10031 Rev No: A | | | |
| Item | Part ID | Description | |
| 01 | 722-10-0 | WASHPIPE, 3.00 BORE, 5000 PSI | |
| 02 | R01-1000-010 | HOLDING NUT | |
| 03 | R01-1001-010 | HOLDING RING | |
| 04 | R01-1002-010 | PACKING, 3 IN | |
| 05 | R01-1003-010 | SPACER ASSEMBLY | |
| 06 | R01-1003-01A | GREASE NIPPLE | |
| 07 | R01-1004-010 | MIDDLE SPACER | |
| 08 | R01-1005-010 | PACKING BOX | |
| 09 | R01-1005-01A | SOCKET HEAD SCREW | |
| 10 | R01-1006-010 | LOWER SPACER | |
| 11 | R01-1007-010 | RETAINING RING | |
| 12 | S01-1348-01N | O-RING | |
| | | |
| | | |
| Part: AY10032 | | | |
| Description: SPARK ARRESTOR ASSY | | | |
| Drawing ID: AY10032 Rev No: A | | | |
| Item | Part ID | Description | |
| 01 | S07-1001-010 | WEATHERSTRIP | |
| 02 | 696-34-0 | SPARK ARRESTOR | |
| 03 | P08-1002-010 | BREATHER/DRAIN, 3/8 NPT, MALE | |
| 04 | HH-0375NC-0125-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.25, GR8, W | |
| 05 | LN-0375NC-GR8 | LOCKNUT, 3/8-16UNC, GR8, STOVER | |
| 06 | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH | |
| 07 | AY12394 | SPARK ARRESTER DROP SCREEN ASSY, HR | |
| | | |
| Part: AY10056 | | | |
| Description: FRAME BASE, INSTR ASSY, 27 NOM | | | |
| Drawing ID: AY10056-X Rev No: E | | | |
| Item | Part ID | Description | |
| 01 | AY 10013 | GAUGE PANEL ASSY | |
| 03 | DT11567-0 | FRAME, 27 TG FACE, 1050E-5:1, FW | |
| 04 | H10-1000-010 | ACCUMULATOR, CHARGED TO 1000 PSI | |
| 05 | H11-1000-030 | HYDRAULIC OIL FILTER | |
| 05A | H11-1000-02A | FILTER ELEMENT | |
| 05B | H11-1000-02D | VISUAL INDICATOR, BYPASS | |
| 06 | H11-1003-010 | LOW PRESSURE FILTER | |
| 06A | H11-1003-01A | FILTER ELEMENT, 25 MICRON | |
| 06B | H11-1000-01C | VISUAL INDICATOR KIT | |
| 07 | N01-1013-010 | GAUGE, DIFFERENTIAL PRESSURE, 0-50 PSI | |
| 09 | HH-0375NC-0075-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 0.75, GR8 | |
| 10 | HH-0250NC-0063-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 0.63, GR8 | |
| 11 | BH-0375NC-0100 | CAPSCR, BUTTON HD SOC, 3/8-16UNC x 1.00 | |
| 13 | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH | |
| 14 | DT12849 | TAP PAD, UPPER FRAME SUPPORT | |
| 15 | DT13844 | MOUNT, MCC J-BOX | |
| 16 | DT13845 | MOUNT, PLC J-BOX | |
| 17 | SH-0500NC-0075-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 0.75 | |
| 18 | LW-0500-IT | LOCKWASHER, 1/2 INT TOOTH | |
| 19 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 20 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 21 | SH-0500NC-0100-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.00 | |
| 22 | FW-0500-A | WASHER, F, 1/2, PLAIN, TYPE A | |
| | | |
| Part: AY10062 | | | |
| Description: HOSE ASSY, HYD, TD, 5:1 RATIO | | | |
| Drawing ID: AY10062 Rev No: E | | | |
| Item | Part ID 1 | Eng ID | |
| 44 | H15-520112-08 | | |
| 45 | H15-520220-08-10 | | |
| 46 | H15-520220-08-08 | | |
| 47 | H15-520220-12-12 | | |
| 48 | H15-520401-08 | | |
| 49 | H15-520429-08 | | |
| 50 | F301JSJ9040404-20.28-X-17.5 | 0 | |
| 51 | F301JSJ9040404-18.75-X-16 | 0 | |
| 52 | F301JSJ1040404-48.58-X-46 | 0 | |
| 53 | F301JSJ1040404-24.08-X-21.5 | 0 | |
| 54 | H15-2000-04-02 | | |
| 55 | H15-2000-04-04 | | |
| 56 | H15-520221-08 | | |
| 57 | H06-1013-010 | | |
| 59 | AY11665 | 0 | |
| Part AY10062 | | | |
| Description: HOSE ASSY, HYD, TD, 5:1 RATIO | | | |
| Drawing ID: AY10062 Rev No: E | | | |
| Item | Part ID Eng ID | |
| 01 | F381JS01121212-67.50-X-64 | 0 | |
| 02 | F381JSJ7121212-49.26-X-46 | 0 | |
| 03 | F381J701121212-109.51-X-10 | 0 | |
| 04 | F301JSJS040404-44.63-X-42 | 0 | |
| 05 | F301JSJS040404-46.63-X-44 | 0 | |
| 06 | F451 JSJ9080808-79.29-X-76.5 | 0 | |
| 07 | F451 JSJ9080808-86.79-X-84 | 0 | |
| 08 | F451JSJS080808-31.8-X-29 | 0 | |
| 09 | F451 JSJS080808-26.8-X-24 | 0 | |
| 10 | F301JSJ7040404-22.3-X-19.5 | 0 | |
| 11 | F301JSJ7040404-42.3-X-39.5 | 0 | |
| 12 | F451 JSJS080808-98.3-X-95.5 | 0 | |
| 13 | F451JSJ7080808-89.82-X-86.7 | 0 | |
| 14 | F451 JSJ7080808-86.71 -X-83.5 | 0 | |
| 15 | F451 JSJ7080808-72.82-X-69.7 | 0 | |
| 16 | F451 JSJS080808-70.05-X-67. | 0 | |
| 18 | F451 JSJS080808-86.3-X-83.5 | 0 | |
| 19 | F451 JSJS080808-83.55-X-80. | 0 | |
| 20 | F451JSJS080808-14.25-X-11. | 0 | |
| 21 | F451JSJS080808- 16.00-X-13. | 0 | |
| 22 | F451 JSJS080808-58.8-X-56 | 0 | |
| 24 | F451JSJ5080808-80.35-X-77.5 | 0 | |
| 25 | F451 JSJ5080808-78.85-X-76 | 0 | |
| 26 | H15-520220-12-10 | | |
| 27 | F451 JSJS080808-60.8-X-58.0 | 0 | |
| 28 | F451 JSJ9080808-14.29-X-11.5 | 0 | |
| 29 | F451JSJ9080808-16.04-X-13.2 | 0 | |
| 30 | F451JSJ1080808-40.35-X-37.5 | 0 | |
| 34 | H15-090136-12-08 | | |
| 35 | H15-1027-010 | | |
| 36 | H15-1027-01A | | |
| 37 | H15-1029-010 | | |
| 38 | H15-1029-01A | | |
| 39 | H15-140338-04-04 | | |
| 40 | H15-2001-04-04 | | |
| 41 | H15-2003-08 | | |
| 42 | H15-520120-08-08 | | |
| 43 | H15-520320-08 | | |
| 43A | H15-520320-04 | | |
| | | |
| Part: AY10063 | | | |
| Description: EXHAUST PLENUM ASSY, 752 MOTOR, 5.00:1 | | | |
| Drawing ID: AY10063 Rev No: E | | | |
| Item | Part ID | Description | |
| 01 | 696-30-0 | PLENUM/MOUNTING FLANGE WELDMEN | |
| 02 | H15-140109E-06 | PLUG, HEX HD, 3/8 NPT | |
| 03 | P08-1002-010 | BREATHER/DRAIN, 3/8 NPT, MALE | |
| 04 | S07-1001-010 | WEATHERSTRIP | |
| 05 | HH-0500NC-0700-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 7.00, GR8, W | |
| 06 | SH-0500NC-0125-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.25 | |
| 07 | SH-0500NC-0300-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 3.00, W | |
| 08 | FS-0312NC-0063 | CAPSCR, FLAT HD SOC, 5/16-18UNC x 0.63 | |
| 09 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 10 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 11 | LW-0500-NL | LOCKWASHER, 1/2 NORD-LOCK | |
| Part: AY10094 | | | |
| | | |
| Description: BACK-UP WRENCH KIT, 500 TON | | | |
| Drawing ID: AY10094 Rev No: B | | | |
| Item | Part ID | Description | |
| DT10905 | SLEEVE, BACK-UP WRENCH MOUNTING | |
| 01 | 829-56-0-500 | MOUNTING BRACKET | |
| 02 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 03 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 04 | SH-0750NC-0150-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 1.50 | |
| 05 | LW-0750-IT | LOCKWASHER, 3/4 INT TOOTH | |
| 06 | SH-0750NC-0225-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 2.25 | |
| Part: AY10095 | | | |
| Description: MOTOR/MAIN HOUSING KIT | | | |
| Drawing ID: AY10095 Rev No: B | | | |
| Item Qty Units Part ID Description | | | |
| DOC10056 | EA | |
| 01A | 685-29-0-003 | EA | |
| 01B | 685-29-0-005 | EA | |
| 01C | 685-29-0-010 | EA | |
| 01D | 685-29-0-015 | EA | |
| 01E | 685-29-0-020 | EA | |
| 01F | 685-29-0-030 | EA | |
| 01G | 685-29-0-050 | EA | |
| 01H | 685-29-0-250 | EA | |
| 02 | M19-3006-010 | EA | |
| 03 | M21-2000-010 | IN | |
| 04 | SB12-1375NC-0400-W | EA | |
| 05 | SB12-1250NC-0300-W | EA | |
| | | |
| Part: AY10100 | | | |
| Description: GEARBOX/MOTOR ASSY, HANDLER ROTATE | | | |
| Drawing ID: AY10100 Rev No: A | | | |
| Item | Part ID | Description | |
| 01 | 602-40-0 | GASKET, MOTOR/GEARBOX | |
| 02 | H02-1003-030 | HYDRAULIC MOTOR | |
| 02A | H15-520220-08-10 | ELL 90°, MALE 1/2 ORFS, MALE 5/8 ORB | |
| 02B | H15-520112-08 | CAP, 1/2 ORFS | |
| 03 | M15-1002-010 | GEARBOX | |
| 03B | M15-1002-01C | KIT, BEARING – 301 GEARBOX | |
| 03C | M15-1002-01B | GEARBOX SEAL KIT | |
| 04 | HH-12MM-35MM-GR8-W | CAPSCR, HEX HD, M12 x 35, GR8.8 | |
| 05 | FW-M12-A | WASHER, F, 12MM, DIN 125A, ZINC PLATED | |
| 06 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 06 | LW-12MM-ET | LOCKWASHER, 12 MM EXTERNAL TOOTH | |
| 07 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| | | |
| Part: AY10319 | | | |
| Description: MOTOR/GEARBOX ASSY, TB, 269 cc | | | |
| Drawing ID: AY10319 Rev No: A | | | |
| Item | Part ID | Description | |
| 01 | 602-40-0 | GASKET, MOTOR/GEARBOX | |
| 02 | H02-1004-010 | HYDRAULIC MOTOR | |
| 03 | M15-1001-010 | GEARBOX, DOUBLE REDUCTION | |
| 03A | M15-1001-01C | BEARING KIT – TORQUE BOOST GEARBOX | |
| 03B | M15-1001-01B | SEAL KIT – GEARBOX | |
| 04 | HH-12MM-35MM-GR8-W | CAPSCR, HEX HD, M12 x 35, GR8.8 | |
| 05 | FW-M12-A | WASHER, F, 12MM, DIN 125A, ZINC PLATED | |
| 06 | LW-12MM-ET | LOCKWASHER, 12 MM EXTERNAL TOOTH | |
| 07 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 08 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| | | |
| Part: AY10738 | | | |
| Description: SPRING LIFT KIT, RM, 500T | | | |
| Eng ID: 0 Drawing ID: AY10738 | |
| Item | Description | Part ID | |
| 01 | SPRING LIFT ASSY | AY10025 | |
| 02 | SPRING MOUNT HANDLER LIFT | 684-24-0 | |
| 03 | CAPSCR, HEX SOC HD, 3/4-10UNC x 2.00 | SH-0750NC-0200-W | |
| 04 | LOCKWASHER, 3/4 INT TOOTH | LW-0750-IT | |
| | | |
| Part: AY10962 | | | |
| Description: MANIFOLD ASSY, ALUM, LUBE SYSTEM | | | |
| Drawing ID: AY10962 Rev No: E | | | |
| | | |
| Item | Part ID | Description | |
| 02 | 731-44-0 | LUBE OIL MANIFOLD | |
| 05 | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 06 | H15-520220-04-04 | ELL 90°, MALE 1/4 ORFS, MALE 1/4 ORB | |
| 07 | H15-520120-04-04 | ADAPTER, MALE 1/4 ORFS, MALE 1/4 ORB | |
| 09 | H13-1013-010 | ORIFICE, 1.5mm, M6 THREAD | |
| 10 | DT11431 | ORIFICE, 4 mm | |
| 12 | H22-1000-010 | TEST STATION, #4 SAE | |
| 14 | H15-520428-04 | TEE, MALE 1/4 ORB RUN, MALE 1/4 ORFS | |
| 15 | H15-520112-04 | CAP, 1/4 ORFS | |
| 16 | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB | |
| | | |
| Part: AY10980 | | | |
| Description: J-BOX, TD PLC, DC/AC,DUAL FLEX | | | |
| Drawing ID: AY10980-X Rev No: F | | | |
| Item | Part ID | Description | |
| 01 | 909-02-1 | J-BOX, PLC, PUNCHED | |
| 02 | AY10981 | BACKPAN ASSY, TD PLC,DUAL FLEX | |
| 03 | E04-2016-010 | STRAIN RELIEF, 1 NPT, 0.750 – 0.880 | |
| 04 | E04-2017-010 | STRAIN RELIEF, 1 NPT, 0.875 – 0.985 | |
| 05 | E04-2028-010 | SEALING RING, 1 NPT | |
| 06 | E04-5048-010 | LOCKNUT, CONDUIT FTG, 1 NPT | |
| 07 | E04-2010-010 | STRAIN RELIEF, 3/4 NPT, 0.625 – 0.750 | |
| 08 | E04-2038-010 | SEALING RING, 3/4 NPT | |
| 09 | E04-5047-010 | LOCKNUT, CONDUIT FTG, 3/4 NPT | |
| 10 | E04-2002-010 | STRAIN RELIEF, 1/2 NPT, 0.375 – 0.500 | |
| 12 | E04-2027-010 | SEALING RING, 1/2 NPT | |
| 13 | E04-5046-010 | LOCKNUT, CONDUIT FTG, 1/2 NPT | |
| 14 | P08-1002-010 | BREATHER/DRAIN, 3/8 NPT, MALE | |
| 15 | N10161 | PRESSURE SWITCH | |
| 15A | H15-2000-08-04 | ELL 90°, MALE 1/2 ORFS, MALE 1/4 NPT | |
| 15D | H15-2001-04-04 | ADAPTER, MALE 1/4 ORFS, MALE 1/4 NPT | |
| 16 | E10446 | ELL, 90°, 1/2 MALE TO 1/2 FEM UNION | |
| 17 | N03-2004-010 | SWITCH, TEMP, 78-200°F, REM MT | |
| 18 | N03-1008-010 | ‘SWITCH, PRESSURE, 30 PSI, X-PROOF | |
| 19 | 909-02-5 | SHIM, RETAINER, 17 IN., PLC J-BOX | |
| 20 | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER | |
| 21 | 909-02-4 | RETAINER,17 IN., PLC J-BOX | |
| 22 | S10076 | STRIP,GASKET,1/4THK X 1W X 36 LG,ADHESIV | |
| 23 | H15-140109P-08 | PLUG, SOC HEX, 1/2 NPT | |
| 24 | FW-0250-A | WASHER, F, 1/4, PLAIN, TYPE A | |
| 27 | E10694 | HOLE FILL, FOR 0.50in C, SS | |
| 28 | E11069 | RTD, 100 OHM, PLAT., 3 WIRE, AMBIENT TMP | |
| 29 | E04-2001-010 | STRAIN RELIEF, 1/2 NPT, 0.125 – 0.250 | |
| 30 | E10696 | HOLE FILL, FOR 1.00in C, SS | |
| 31 | E04-2012-010 | STRAIN RELIEF, 1 NPT, 0.250 – 0.375 | |
| 32 | DT14169 | RETAINER, 12-1/2 IN., PLC J-BOX | |
| 33 | DT14170 | SHIM, RETAINER, 12-1/2, PLC J-BOX | |
| R01 | M10246 | GASKET, 5/16 IN DIA, CYL, 1 IN LONG | |
| R02 | M12029 | GASKET, 3/16in DIA, CYLINDRICAL, BUNA 70 | |
| | | |
| Description: BACKPAN ASSY, TD PLC,DUAL | | | |
| FLEX | | | |
| Drawing ID: AY10981 Rev No: E | | | |
| Item Qty Units Part ID Eng ID Description | | | |
| 01 | 909-02-3 | EA | |
| 02 | LN-0312NC-GR8 | EA | |
| 03 | E35-3010-010 | IN | |
| 04 | E35-3009-010 | IN | |
| 05 | E16-1047-010 | IN | |
| 06 | N21-1000-010 | EA | |
| 07 | N21-3000-010 | EA | |
| 08 | N21-3001-010 | EA | |
| 09 | N21-3005-010 | EA | |
| 10 | N10007 | EA | |
| 11 | N21-1001-010 | EA | |
| 13 | N21-1002-010 | EA | |
| 14 | E10536 | EA | |
| 15 | E10538 | EA | |
| 16 | E10537 | EA | |
| 17 | E10928 | EA | |
| 18 | N10074 | EA | |
| 18A | E10506 | EA | |
| 19 | AY10906 | EA | |
| 20 | AY11061 | EA | |
| 21 | N10112 | EA | |
| R01 | RH-P-10-32-0050-SS | EA | |
| R02 | PH-P-10-32-0050 | EA | |
| R03 | EP-1000173 | EA | |
| R04 | E10074 | EA | |
| | | |
| Part: AY10990 | | | |
| | | |
| Description: DUAL REMOTE VLV ASSY, BRAKE ACTUATOR | | | |
| Eng ID: 0 | | | |
| Drawing ID: AY10990 Rev No: 0 | | | |
| Item | Part ID | Description | |
| 01 | H10123 | BALL VALVE | |
| 02 | H15-2001-04-04 | ADAPTER, MALE 1/4 ORFS, MALE 1/4 NPT | |
| | | |
| Part: AY11031 | | | |
| Description: MANIFOLD, BLOCK, HYD, 24V, LOCK PIN | | | |
| Drawing ID: AY11031 Rev No: D | | | |
| Item | Part ID | Description | |
| 01 | AY10887 | BLOCK MANIFOLD | |
| 02 | H10059 | VLV, HYD, DIR, 3 POS, 4 WAY, 24V, D03 | |
| 03 | H10142 | VLV, HYD, DIR, 2 POS, 4 WAY, 24V, D03 | |
| 04 | H10053 | VLV, HYD, DIR, 3 POS, 4 WAY, 24V, D03 | |
| 05 | H12-1010-010 | COVER PLATE D03 | |
| 06 | SH-10-24-0200 | CAPSCR, HEX SOC HD, # 10-24UNC x 2.00 | |
| 07 | SH-10-24-0350 | CAPSCR, HEX SOC HD, # 10-24UNC x 3.50 | |
| 08 | H10151 | SOLENOID | |
| 09 | H06-1006-010 | PRESSURE RELIEF VALVE | |
| 10 | H10060 | VLV, HYD, DIR, 2 POS, 24V, D03 | |
| 11 | H13-1017-010 | ORIFICE, 1.0mm, PUSH-IN | |
| | | |
| Part: AY11032 | | | |
| Description: FRAME, UPPER ASSY, 500, FLEX | | | |
| Drawing ID: AY11032 Rev No: D | | | |
| Item | Part ID | Description | |
| 01 | AY11031 | MANIFOLD, BLOCK, HYD, 24V, LOCK PIN | |
| 03 | AY10962 | MANIFOLD ASSY, ALUM, LUBE SYSTEM | |
| 11 | H25-1014-010 | CLAMP, SINGLE, 1 IN DIA | |
| 12 | M20-1046-010 | RUBBER CHANNEL 1/4 in | |
| 13 | HH-0500NC-0100-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.00, GR8, W | |
| 14 | LW-0500-ET | LOCKWASHER, 1/2 EXTERNAL TOOTH | |
| 15 | HH-0312NC-0300-GR8-W | CAPSCR, HEX HD, 5/16-18UNC x 3.00, GR8,W | |
| 16 | HH-0250NC-0225-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 2.25, GR8, W | |
| 18 | LN-0312NC-GR8 | LOCKNUT, 5/16-18UNC, GR8, STOVER | |
| 19 | FW-0312-A | WASHER, F, 5/16, PLAIN, TYPE A | |
| 20 | FW-0250-A | WASHER, F, 1/4, PLAIN, TYPE A | |
| 27 | AY11619 | KIT, J-BOX VIBRATION | |
| REF | DT13844 | MOUNT, MCC J-BOX | |
| REF | DT13845 | MOUNT, PLC J-BOX | |
| | | |
| | | |
| Part: AY11115 | | | |
| | | |
| Description: BRAKE ASSY, 4 CALIPER, GE 752, ELM | | | |
| Drawing ID: AY11115 Rev No: C | | | |
| Item | Part ID | Description | |
| 01 | DT11164 | HYDRAULIC TUBE, 1/4, DISC BRAKE | |
| 02 | DT11165 | HYDRAULIC TUBE, 1/4, DISC BRAKE | |
| 03 | 686-11-0 | BRAKE DISC | |
| 04A | 686-13-0-005 | SHIM, 0.005, DISC BRAKE | |
| 04B | 686-13-0-010 | SHIM, 0.010, DISC BRAKE | |
| 04C | 686-13-0-030 | SHIM, 0.030, DISC BRAKE | |
| 04D | 686-13-0-050 | SHIM, 0.050, DISC BRAKE | |
| 05 | 686-14-0 | BRACKET, SENSOR, DISC BRAKE | |
| 06 | 686-16-0 | BRACKET, DISC LOCKING | |
| 07 | 686-18-0 | PLATE, CALIPER MOUNTING, 27 DIA x 2.00 | |
| 08 | DT11382 | PLATE, SIDE, GUARD, BRAKE, 4 CALIPER | |
| 09 | E04-2001-010 | STRAIN RELIEF, 1/2 NPT, 0.125 – 0.250 | |
| 10 | AY12478-2 | KIT, RETROFIT, OUTLET BOX, 4017 | |
| 11 | H15-2000-04-02 | ELL 90°, MALE 1/4 ORFS, MALE 1/8 NPT | |
| 12 | H15-2001-04-02 | ADAPTER, MALE 1/4 ORFS, MALE 1/8 NPT | |
| 13 | H15-520120-04-04 | ADAPTER, MALE 1/4 ORFS, MALE 1/4 ORB | |
| 14 | H15-520220-04-04 | ELL 90°, MALE 1/4 ORFS, MALE 1/4 ORB | |
| 16 | H10003 | CLAMP, HOSE SUPPORT, 0.312 DIA | |
| 17 | M16-1000-010 | CALIPER, BRAKE | |
| 17A | M16-1000-01A | PAD, FRICTION SHOE, DISC BRAKE | |
| 17B | M16-1000-01B | SEAL KIT, DISC BRAKE | |
| 17C | SH-1000NC-0550-W | CAPSCR, HEX SOC HD, 1-8UNC x 5.50 | |
| 18 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 19 | M19-5005-010 | EYEBOLT, SHLD TYPE, 1-8UNC x 2 1/2 | |
| 20 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 21 | N10000 | PROX SENSOR, 1-NO 1-NC, 10-60VDC | |
| 22 | HH-0500NC-0175-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.75, GR8, W | |
| 23 | HH-0500NC-0100-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.00, GR8, W | |
| 24 | HH-0500NC-0050-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 0.50, GR8, W | |
| 25 | HH-0250NC-0075-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 0.75, GR8, W | |
| 26 | SH-1000NC-0200-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.00 | |
| 27 | SH-0750NC-0250-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 2.50 | |
| 28 | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER | |
| 29 | LN-0250NC-GR8 | LOCKNUT, 1/4-20UNC, GR8, STOVER | |
| 30 | LW-0500-ET | LOCKWASHER, 1/2 EXTERNAL TOOTH | |
| 31 | LW-0250-ET | LOCKWASHER, 1/4, EXTERNAL TOOTH | |
| 32 | LW-1000-IT | LOCKWASHER, 1 INT TOOTH | |
| 33 | LW-0750-IT | LOCKWASHER, 3/4 INT TOOTH | |
| 34 | DT11383 | PLATE, TOP, GUARD, BRAKE, 4 CALIPER | |
| 35 | HH-0375NC-0075-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 0.75, GR8 | |
| | | |
| | | |
| Part: AY11240 | | | |
| Description: BACK-UP WRENCH ASSY, 500 T, 43.25 STRK | | | |
| Drawing ID: AY11240 Rev No: F | | | |
| Item | Part ID | Description | |
| 01 | AY11241 | POSITIONER ASSY | |
| 02 | AY12945 | FRAME ASSEMBLY | |
| 03 | 588-27-0 | STOP PIN | |
| 04 | AY10028-4 | TELESCOPING TUBE ASSY | |
| 05 | DT11475 | GUARD | |
| 06 | DT11487 | FOOT STOP | |
| 07 | DT11478 | LOWER GUARD MOUNT | |
| 08 | 829-22-0 | WASHER | |
| 09 | 829-38-0-43 | GUARD | |
| 10 | DT11476 | BULKHEAD | |
| 11 | DT11482 | BUSHING | |
| 12 | F451JSJ9081208-39.06-X-36 | HOSE ASSY, 1/2, SWV STR, 90° SHT, 39.06 | |
| 13 | F451JSJ1080808-23.35-X-20.5 | HOSE ASSY, 1/2, SWV STR, 90° LONG, 23.35 | |
| 14 | F451JSJ1080808-34.85-X-32 | HOSE ASSY, 1/2, SWV STR, 90° LONG, 34.85 | |
| 15 | F451JSJS080808-43-X-40.25 | HOSE ASSY, 1/2, SWV STR, SWV STR, 43 | |
| 16 | F451JSJS080808-37.3-X-34.5 | HOSE ASSY, 1/2, SWV STR, SWV STR, 37.3 | |
| 17 | F451JSJ1080808-12.25-X-9.5 | HOSE ASSY, 1/2, SWV STR, 90° LONG, 12.25 | |
| 18 | F451JSJ9081208-48.06-X-45 | HOSE ASSY, 1/2, SWV STR, 90° SHT, 48.06 | |
| 19 | F451JSJ9080808-12.25-X-9.5 | HOSE ASSY, 1/2, SWV STR, 90° SHT, 12.25 | |
| 20 | H09-1004-010 | COUNTERBALANCE VALVE | |
| 21 | H15-520601-08 | UNION, BULKHEAD, MALE 1/2 ORFS | |
| 22 | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER | |
| 24 | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 25 | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 26 | H15-520701-12 | ELL 90°, BULKHEAD, MALE 3/4 ORFS | |
| 27 | H25-1004-010 | CLAMP, SINGLE, 3/4 IN DIA | |
| 28 | H25-1005-010 | CLAMP, DOUBLE, 3/4 IN DIA | |
| 29 | M19-3007-010 | WIRE ROPE CRIMP | |
| 30 | M21-2001-010 | WIRE ROPE, 3/16 | |
| 31 | M24-2001-010 | SAFETY PIN | |
| 32 | SH-0750NC-0125-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 1.25, W | |
| 33 | HH-0500NC-0200-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 2.00, GR8, W | |
| 33A | LW-0500-NL | LOCKWASHER, 1/2 NORD-LOCK | |
| 34 | HH-0750NC-0225-GR8-W | CAPSCR, HEX HD, 3/4-10UNC x 2.25, GR8, W | |
| 35 | HH-0312NC-0175-GR8-W | CAPSCR, HEX HD, 5/16-18UNC x 1.75, GR8,W | |
| 36 | SH-0500NC-0225-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 2.25 | |
| 37 | FW-0750-A | WASHER, F, 3/4, PLAIN, TYPE A | |
| 38 | FS-0375NC-0050 | CAPSCR, FLAT HD SOC, 3/8-16UNC x 0.50 | |
| 39 | HH-0750NC-0175-GR8-W | CAPSCR, HEX HD, 3/4-10UNC x 1.75, GR8-W | |
| 40 | LW-0500-ET | LOCKWASHER, 1/2 EXTERNAL TOOTH | |
| | | |
| | | |
| Part: AY11241 | | | |
| Description: POSITIONER ASSY, BUW, 1050, 43.25 | | | |
| Drawing ID: AY11241 Rev No: D | | | |
| | | |
| Item | Part ID | Description | |
| 01 | 588-45-0 | GUIDE PLATE | |
| 02 | 588-46-0 | GUIDE PLATE | |
| 03 | 687-13-0 | INNER, PLATE, TOP SPRING | |
| 04 | 687-21-0-35 | SPRING SUPPORT ROD | |
| 05 | DT11397 | HYDRAULIC CYLINDER | |
| 05A | H18-2513-04A | CYLINDER SEAL KIT | |
| 05B | H19-1001-010 | PIVOT PIN | |
| 05C | AY12546 | PIN ASSY, PIVOT, BUW UPPER CYL | |
| 05D | M10004 | COTTER PIN, 1/8 x 2.00 | |
| 07 | 829-13-0-43 | LUG MOUNT | |
| 08 | 829-14-0-43 | STOP ROD | |
| 09 | 829-36-0 | RETAINER | |
| 10 | 829-35-0 | GUIDE PLATE | |
| 11 | DT11396-0 | BUW OUTER TUBE | |
| 12 | DT11925 | BUW INNER TUBE | |
| 13 | H15-2012-08-08 | ADAPTER LG, MALE 1/2 ORFS, 1/2 ORB | |
| 15 | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 16 | H15-520701-08 | ELL 90°, BULKHEAD, MALE 1/2 ORFS | |
| 17 | M12-1000-010 | GREASE NIPPLE, 1/8 NPT, STRAIGHT | |
| 18 | M14-1018-010 | SPRING, 1.50 DIA HOLE, 0.75 DIA ROD | |
| 19 | M17-1004-010 | ROLL PIN, 5/16 x 1.50 | |
| 21 | SH-0625NC-0200-W | CAPSCR, HEX SOC HD, 5/8-11UNC x 2.00 | |
| 22 | SH-0500NC-0250-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 2.50, W | |
| 23 | F451JSJS080808-46.30-X-43.5 | HOSE ASSY, 1/2, SWV STR, 46.30 | |
| 24 | M21-2000-010 | WIRE ROPE, 1/16″ DIA | |
| 25 | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM | |
| 26 | LW-0500-IT | LOCKWASHER, 1/2 INT TOOTH | |
| 27 | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH | |
| 28 | DT12800 | COVER, BOLT RETAINER, 43.25 BUW | |
| 29 | HH-0500NC-0300-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 3.00, GR8, W | |
| 30 | FW-0500-A | WASHER, F, 1/2, PLAIN, TYPE A | |
| 31 | DT14541-005 | SHIM, 0.005″ | |
| 32 | DT14541-010 | SHIM, 0.010″ | |
| 33 | DT14541-030 | SHIM, 0.030″ | |
| 34 | DT14542-005 | SHIM, 0.005″ | |
| 35 | DT14542-010 | SHIM, 0.010″ | |
| 36 | DT14542-030 | SHIM, 0.030″ | |
| REF | H15-520118-08 | LOCKNUT, BULKHEAD 1/2, 13/16-16UNF | |
| | | |
| | | |
| | | |
| Part: AY11250-500 | | | |
| Description: KIT, WARNING LABELS, TOP DRIVE, 500 TON | | | |
| Drawing ID: AY11250-500 Rev No: A | | | |
| | | |
| Item | Part ID | Description | |
| 02 | DT12433-1 | LABEL, HIGH VOLTAGE, 2 X 5, VINYL | |
| 03 | DT12433-2 | LABEL, HIGH VOLTAGE, 5 X 8, VINYL | |
| 04 | DT12434-1 | LABEL, PINCH POINT, 2 X 5, VINYL | |
| 05 | DT12434-2 | LABEL, PINCH POINT, 5 X 8, VINYL | |
| 06 | DT12435 | LABEL, LEFT HAND THREAD, 2 X 5, VINYL | |
| 07 | DT14834 | LABEL, SHIPPING, 3 X 5, VINYL | |
