| CSF-1600 Mud Pump Parts List | | |
| List of spare parts along with CSF-1600 (refer to the Contract) | | |
| S/N | Name | Drawing No. | |
| 1 | Oil seal 9.125″×10.375″×0.625 | CS36001-03.08 | |
| 2 | O ringØ190.9×Ø3.53 | CS36001-004.07 | |
| 3 | O ringØ158.12×Ø6.99 | CS36001-04.16 | |
| 4 | Single-lip oil seal 5″×6.25″×0.563″ | CS36001-04.06.00 | |
| 5 | Two-lip oil seal 5″×6.25″×0.625″ | CS36001-04.08.00 | |
| 6 | O ringØ94.12×Ø5.33 | CS36001-05.11 | |
| 7 | Bonnet seal ring | CS36001-05.13 | |
| 8 | Cylinder liner seal ring | CS36001-05.15 | |
| 9 | Cylinder lid seal ring | CS36001-05.08 | |
| 10 | O ring Ø202.57×Ø6.99 | CS36001-05.21 | |
| 11 | Piston seal ring | CS36001-05.20A | |
| 12 | O ringØ183.52×Ø6.99 | CS36001-05.32 | |
| 13 | O ringØ342.26×Ø6.99 | CS36001-05.38 | |
| 14 | Rubber bursa | CS36001-05.35.09 | |
| 15 | Rubber Ø170 | CS36001-05.19.06.02 | |
| 16 | Valve rubber | CS36001-05.1205 | |
| 17 | Backing ring R44 | CS36001-28 | |
| 18 | Backing ring R39 | CS36001-01 | |
| 19 | Buffer pad | CS36001-06 | |
| 20 | Piston assembly | CS36001-03.00 | |
| 21 | Airbag | CS36001-03.00 | |
| 22 | Safety pin | CS36001-11 | |
| CSF-1600 driven well pump(CS36001-00 CS37001-00) | | |
| S/N | Name | Code | Remark |
| 1 | Rack assembly | CS36001-01.01.00A | |
| 2 | Crank shaft assembly | CS32001-01.00 | |
| 3 | Pinion assembly | CS32001-02.00 | |
| 4 | Crosshead assembly | CS36001-04.00 | |
| 5 | Fluid end assembly | CS36001-05.00 | |
| 6 | Drive end lubricant assembly | CS36001-06A.00 | |
| 7 | Base | CS36001-07C.00 | |
| 8 | SprinCSing Pump assembly | CS36001-08C.00 | |
| 9 | Seal packing ring | CS36001-07 | Borrowed |
| 10 | Air vent cover | CS36001-108.00 | |
| 11 | Stud bolt M12×5 | CS36001-11A | Borrowed |
| 12 | CS nameplate | CS17001-03 | |
| 13 | Small crane | CS36001-10.00 | |
| 14 | Lifting frame | CS36001-11.00 | |
| 15 | Cover board | CS36001-12.00 | |
| 16 | Seal packing | CS36001-13 | |
| 17 | Bolt M12×5 | CS36001-86 | Outsourced |
| 18 | Indication board | CS36001-17 | Borrowed |
| 19 | Oil gauge assembly | CS36001-18.00 | Borrowed |
| 20 | Spacer group | CS36001-19 | Borrowed (as per demand) |
| 21 | Discharge cover (Ⅰ) | CS36001-20.00 | Borrowed |
| 22 | Discharge cover (Ⅱ) | CS36001-21.00 | Borrowed |
| 23 | Seal packing ring | CS36001-19 | |
| 24 | Bolt M12×35 | CS36001-86 | Outsourced |
| 25 | Crosshead hole cover | CS36001-15 | |
| 26 | Seal packing | CS36001-86 | |
| 27 | Bolt M16×40 | BG5780-86 | Outsourced |
| 28 | Spring washer 12 | BG93-76 | Outsourced |
| 29 | Nail for indication board | GB827-76 | Outsourced |
| 3×10 | | |
| 30 | Bolt M27×100 | BG5780-86 | Outsourced |
| 31 | Nut M27 | BG41-36 | Outsourced |
| 32 | Spring washer 27 | BG93-76 | Outsourced |
| 33 | Washe r 12 | BG848-85 | Outsourced |
| 34 | Washe r 16 | BG848-76 | Outsourced |
| 35 | Bolt M16×60 | BG5780-86 | Outsourced |
| 36 | Nut M16 | BG41-86 | Outsourced |
| 37 | Spring washer 16 | BG93-76 | Outsourced |
| 38 | Bolt M24×110 | GB5780-86 | Outsourced |
| 39 | Nut M24 | GB41-86 | Outsourced |
| 40 | Spring washer 24 | GB93-76 | Outsourced |
| 41 | Rubber bar 40×10×5800 | | Outsourced |
| 42 | Copper mesh 20 holes/inch | | Outsourced |
| 43 | Screw M4×16 | GB818-85 | Outsourced |
| 44 | Quake-proof pressure gauge | YKJ-150 | Outsourced |
| 60Mpa | | |
| 45 | 3″NPT×Z e 1/2″ elbow | CS33001-32 | Borrowed |
| 46 | Connection pipe 3″NPT | CS33001-33 | Borrowed |
| 47 | Connection pipe 3″NPT | CS33001-34 | Borrowed |
| 48 | Right-angle elbow 3″NPT | CS33001-35 | Borrowed |
| 49 | Bent pipe | CS33001-30 | Borrowed |
| 50 | Screw plug ZG11/2″ | Q/ZB/286.6 | Borrowed |
| 51 | Backing ring R44 | CS33001-28 | |
| 52 | Discharge strainer assembly | CS33001-27.00 | |
| 53 | Flange | CS33001-27.02.03 | Borrowed |
| 54 | Tools along with equipment | CS33001-17.00 | |
| 55 | KB-75 air dome | CS33002-00 | Borrowed |
| 56 | JA-3 shearing safety valve | CS33002-00 | Borrowed |
| 57 | Spare parts along with equipment | CS33001-18.00 | |
| CSF-1600 driven well pump fluid end assembly(CS36001-05.00) | | |
| S/N | Name | Code | Remark |
| 1 | Fluid cylinder assembly | CS36001-05.01A00 | |
| 2 | Cylinder lid flange | CS36001-02 | |
| 3 | Cylinder lid | CS36001-03 | |
| 4 | Plugboard | CS36001-04A | |
| 5 | Rod guider(down) | CS36001-05 | |
| 6 | Cylinder lid end closer | CS36001-06 | |
| 7 | Positioning valve ring | CS36001-07 | |
| 8 | Cylinder lid seal ring | CS36001-08 | |
| 9 | Discharge pipeline | CS36001-09 | |
| 10 | Va l ve s p rin g | CS36001-10 | |
| 11 | O ring Ø94.62×Ø5.33 | CS36001-11 | |
| 12 | Valve assembly | CS36001-12 | |
| 13 | Bonnet seal ring | CS36001-13 | |
| 14 | Bonnet | CS36001-14A | |
| 15 | Cylinder lid seal ring | CS3600-15 | |
| 16 | Wearing disk | CS36001-16 | |
| 17 | Cylinder liner flange | CS36001-17 | |
| 18 | Cylinder liner gland | CS36001-18.00 | |
| 19 | Piston rod | CS36001-19A | |
| 20 | Connection pipe Z 3/8 | CS36001-20 | |
| 21 | O ring Ø202.5×Ø6.99 | CS36001-21 | |
| 22 | Cylinder liner locking ring | CS36001-22 | |
| 23 | Cylinder liner | CS36001-23 CS36001-23A00 | |
| 24 | Collar clamp assembly | CS36001-24 | |
| 25 | Hose adapter Ø13×Ø25 | CS36001-25.00 | |
| 26 | Elbow Z 3/8 -M22×1.5 | CS36001-26 | |
| 27 | Cylinder liner end cover | CS36001-27 | |
| 28 | Piston | CS36001-28.00 | |
| 29 | Bolt M22×65 | GB5780-86 | |
| 30 | Joint Z 1/2 -M22×1.5 | CS36001-30 | |
| 31 | Right-angle joint Z1×Z 1/2 | CS36001-31 | |
| 32 | Suction pipeline | CS36001-32 | |
| 33 | Spacer group | CS36001-33A.00 | |
| 34 | Bracket | CS36001-05.34A.00 | |
| 35 | Rod guider (up) | CS36001-05.12 | Borrowed |
| 36 | Stud screw M39×255 | CS36001-05.36 | |
| 37 | Nut M39×3 | CS36001-05.01A.06 | Borrowed |
| 38 | Baffle plate | CS36001-05.14 | Borrowed |
| 39 | Bolt M10×20 | CS36001-05.15A | Borrowed |
| 40 | Piston seal ring | CS36001-05.20A | Borrowed |
| 41 | Piston nut | CS36001-05.18.00A | Borrowed |
| 42 | O RING Ø183.52×Ø6.99 | CS36001-05.32 | Borrowed |
| 43 | suction air dome | CS36001-05.35.00 | Borrowed |
| 44 | O RING Ø342.26×Ø6.99 | CS36001-05.38 | Borrowed |
| 45 | Suction flange (Ⅰ) | CS36001-05.39 | Borrowed |
| 46 | Suction flange (Ⅱ) | CS36001-05.40 | Borrowed |
| 47 | Nut M27 | GB82-76 | Outsourced |
| 48 | Bolt M27×130 | GB5780-86 | Outsourced |
| 49 | Steel wire Ø16L=1830 | GB4540-84 | Outsourced |
| 50 | Oil-transmission hose | | Shanghai Rubber Factory |
| Ø13×Ø25L=850 | | |
| JA-3 Shearing safety valve | | |
| S/N | Name | Code | Remark |
| 1 | Joint | CS3303-01 | |
| 2 | Retaining ring | CS3303-02 | |
| 3 | Piston assembly | CS3303-03.00 | |
| 4 | Valve | CS3303-04 | |
| 5 | Piston rod | CS3303-05 | |
| 6 | Buffer pad | CS3303-06 | |
| 7 | Elastic cylindrical pin | CS3303-07 | |
| 8 | Locking spring | CS3303-08 | |
| 9 | Safety cover | CS3303-09 | |
| 10 | Shearing plate | CS3303-10 | |
| 11 | Searing pin | CS3303-11 | |
| 12 | Warning nameplate | CS3303-12 | |
| 13 | Pin roll | CS3303-13 | |
| 14 | Wire retaining ring | CS3303-14 | |
| 15 | Nameplate | CS3303-15B | |
| 16 | Split pin 4×25 | GB91-76 | Outsourced |
| 17 | Nut M4 | GB52-76 | Outsourced |
| 18 | Nut M4×6 | GB67-76 | Outsourced |
| 19 | Nut M10×100 | GB30-76 | Outsourced |
| KB75air dome (CS33002-00) | | |
| S/N | Name | Code | Remark |
| 1 | Seal ring R30 | CS33001-05.35.13 | |
| 2 | Bottom plug | JZR3-18 | |
| 3 | Airbag | Y-60 | |
| 4 | Shell assembly | PJC1-L8 | |
| 5 | Cover | CS33002-08.00 | |
| 6 | Three-way 1/4NPT | CS33002-07 | |
| 7 | Joint 1/4NPT | CS33002-06 | |
| 8 | Cover assembly of pressure gauge | CS33002-05 | |
| 9 | Vent valve | CS33002-04.00 | Outsourced |
| 10 | Pressure gauge 0-25Mpa | CS33002-03.00 | Outsourced |
| 11 | Angle stop valve | CS33002-02 | Outsourced |
| 12 | Washe | CS33002-01 | Borrowed |
| Proposed list for user purchase | | |
| S/N | Name | Drawing No. | Remark |
| 1 | Oil seal 9.125″×10.375″×0.625 | CS3601-03.08 | |
| 2 | Cylinder lid seal ring | CS3601-05.08 | |
| 3 | Valve assembly | CS3601-05.12.00 | |
| 4 | Cylinder liner Ø180 | CS3601-05.23 | Common |
| 5 | Cylinder liner Ø170 | CS3601-05.23A.00 | Bimetal |
| 6 | Cylinder liner Ø160 | CS3601-05.23A.00 | Bimetal |
| 7 | Cylinder liner Ø150 | CS3601-05.23A.00 | Bimetal |
| 8 | Cylinder liner Ø140 | CS3601-05.23A.00 | Bimetal |
| 9 | pistonØ180 | CS3601-05.28.01.00 | |
| 10 | pistonØ170 | CS3601-05.19.06.00 | |
| 11 | pistonØ160 | CS3601-05.19.05.00 | |
| 12 | pistonØ150 | CS3601-05.19.04.00 | |
| 13 | pistonØ140 | CS360105.19.03.00 | |
| 14 | O ring Ø202.5×Ø6.99 | CS3601-05.21 | |
| 15 | O ring Ø202.5×Ø3.53 | CS3601-04.07 | |
| 16 | O ring Ø202.5×Ø6.99 | CS3601-04.16 | |
| 17 | Piston rod | CS3601-05.19A | |
| 18 | Intermediate rod | CS3601-04.11 | |
| 19 | Piston nut | CS3601-05.18.00A | For compaction of piston |
| 20 | Cylinder liner seal ring | CS3601-05.15 | |
| 21 | Bonnet seal ring | CS3601-05.13 | |
| 22 | Piston seal ring Ø55×Ø45×Ø55 | CS3601-05.20A | For sealing of piston |
| 23 | O ring Ø94.62×Ø5.33 | CS3601-05.11 | |
| 24 | O ring Ø183.52×Ø6.99 | CS3601-05.32 | |
| 25 | O ring Ø342.32×Ø6.99 | CS3601-05.38 | |
| 26 | Single-lip oil seal 5″×6.25″×0.625″ | CS3601-04.08.00 | For sealing of intermediate rod |
| 27 | Two-lip oil seal 5″×6.25″×0.625″ | CS3601-04.06.00 | For sealing of intermediate rod |
| 28 | Airbag | CS3601-03.00 | For KB-75 air dome |
| 29 | Safety pin | CS3601-11 | For JA-3 shearing safety valve |
| 30 | Piston assembly | CS3601-03.00 | For JA-3 shearing safety valve |
| 31 | Rubber bursa | CS3601-05.35.09 | For suction air dome |
| List of spare parts along with CSF-1600 (refer to the Contract) | | |
| S/N | Name | Drawing No. | |
| 1 | Oil seal 9.125″×10.375″×0.625 | CS36001-03.08 | |
| 2 | O ringØ190.9×Ø3.53 | CS36001-004.07 | |
| 3 | O ringØ158.12×Ø6.99 | CS36001-04.16 | |
| 4 | Single-lip oil seal 5″×6.25″×0.563″ | CS36001-04.06.00 | |
| 5 | Two-lip oil seal 5″×6.25″×0.625″ | CS36001-04.08.00 | |
| 6 | O ringØ94.12×Ø5.33 | CS36001-05.11 | |
| 7 | Bonnet seal ring | CS36001-05.13 | |
| 8 | Cylinder liner seal ring | CS36001-05.15 | |
| 9 | Cylinder lid seal ring | CS36001-05.08 | |
| 10 | O ring Ø202.57×Ø6.99 | CS36001-05.21 | |
| 11 | Piston seal ring | CS36001-05.20A | |
| 12 | O ringØ183.52×Ø6.99 | CS36001-05.32 | |
| 13 | O ringØ342.26×Ø6.99 | CS36001-05.38 | |
| 14 | Rubber bursa | CS36001-05.35.09 | |
| 15 | Rubber Ø170 | CS36001-05.19.06.02 | |
| 16 | Valve rubber | CS36001-05.1205 | |
| 17 | Backing ring R44 | CS36001-28 | |
| 18 | Backing ring R39 | CS36001-01 | |
| 19 | Buffer pad | CS36001-06 | |
| 20 | Piston assembly | CS36001-03.00 | |
| 21 | Airbag | CS36001-03.00 | |
| 22 | Safety pin | CS36001-11 | |
| List of special tools provided along with the pump | | |
| S/N | Name | Drawing No. | Remark |
| 1 | Lifting tool for cylinder liner | CS36001-17.02A-03 | |
| 2 | Socket M39×3 | CS36001-17.02A-04 | |
| 3 | Socket M33×3 | CS36001-17.02A-05 | |
| 4 | Socket M76×3 | CS36001-17.02A-06 | |
| 5 | Socket M76×3 | CS36001-17.02A-08 | |
| 6 | Joint 1″ | CS36001-17.02A-12 | |
| 7 | SH 1/2 ring bond chain block | GB560-64 | Maximum capacity shall be 500g |
| 8 | Hydraulic valve base extractor | CS36001-17.15-00 | |
| 9 | Manual-drive hydraulic pump and pipeline | 1600-1 type | Outsourced |
| 10 | Inner hexagon (19)wrench | CS36001-17.19 | Outsourced |
| 11 | Socket | CS36001-17.20 | |
| 12 | Inner hexagon (17)wrench | | Outsourced |
| 13 | cylinder lid rod Ø 30×500 | CS36001-31.08 | |
