Description
HYC SLIP TYPE ELEVATOR
Introduction
The Y Series Type Slip Elevators are hoisting tools for handling tubing, drill pipe, casing, electric submersible pump and other tubular goods in oil and gas fields. It is especially fit to integral joint tubing and non-coupled casing. It is constructed in two halves of practically the same weight, four slip bodies and some inserts, providing balance and easier opening and closing. They are designed and manufactured according to API Spec 8A/8C－specification for drilling and production Hoisting Equipment.
Main Specification:
| Type | Description | Pipe O.D | Max. load | |||
| Slip assembly | Slip setting ring | Insert | tons | kN | ||
| YT/75, HYT/150-200, MYT/40 | 3.1/2 | 27813 | 3.1/2（24774） | 3.1/2-2.7/8 | 75 150 200 | 675 1350 1800 |
| 27695 | 2.7/8（30358） | |||||
| 2.7/8 | 27695 | 2.7/8（24773） | 2.7/8-1.315 | |||
| 27694 | 2.3/8（29255） | |||||
| 27812 | 2.1/16（29256） | |||||
| 28821 | 2（29256） | |||||
| 27811 | 1.9（29257） | |||||
| 27810 | 1.66（29258） | |||||
| 29001 | 1.315（29259） | |||||
| 2.7/8 | 29348 | 2.7/8（24773） | 2.7/8-1.315 | 40 | 360 | |
| 29345 | 2.3/8（29255） | |||||
| 29350 | 2.1/16（29256） | |||||
| 29351 | 2（29256） | |||||
| 29352 | 1.9（29257） | |||||
| 29353 | 1.66（29258） | |||||
| 29354 | 1.315（29259） | |||||
| YC/75 HYC/150-200 | 7.5/8(HYC) | 55516 | 7.5/8(70010) | 7.5/8 | 75 150 200 | 675 1350 1800 |
| 7 | 30229 | 7（16407） | 7-6.5/8 | |||
| 30226 | 6.5/8（24748） | |||||
| 5.1/2 | 30223 | 5.1/2（16407） | 5.1/2-5 | |||
| 30220 | 5（24783） | |||||
| 4.1/2 | 30219 | 4.1/2（16408） | 4.1/2-3.1/2 | |||
| 30209 | 4（24781） | |||||
| 34932 | 3.1/2（24779） | |||||
Exploded Drawing for HYC SLIP TYPE ELEVATOR
Spare Parts List for HYC SLIP TYPE ELEVATOR
| S/N | Name | QTY | Parts No. | S/N | Name | QTY | Parts No. |
| 1 | Bolts 1 | 2 | 20 | Slip springs | 4 | 030101017 | |
| 2 | Lock nuts | 2 | 21 | Slip bolts | 4 | ||
| 3 | Bolts | 2 | 22 | Spring washers | 4 | ||
| 4 | Slotted nuts | 2 | 23 | setting plate bolt | 4 | 010804027 | |
| 5 | Cotter pins | 2 | 24 | Rubber sleeves | 4 | 010804029 | |
| 6 | Lind block | 2 | 011101027 | 25 | 3.1/2 setting ring | 1 | 010804018 |
| 7 | Left main bodies | 2 | 010804001 | 4 setting ring | 1 | 010804019 | |
| 8 | Lock pin | 1 | 4.1/2 setting ring | 1 | 010804020 | ||
| 9 | Retainer pin | 1 | 6*80 | 5 setting ring | 1 | 010804021 | |
| 10 | Latch spring baffle | 1 | setting ring | 1 | 010804022 | ||
| 11 | Latch lock pin | 1 | 6.5/8 setting ring | 1 | 010804023 | ||
| 12 | Latch latch spring | 1 | 030102010 | 7 setting ring | 1 | 010804024 | |
| 13 | Latch lock | 1 | 0 | 7.5/8 setting ring | 1 | 010804025 | |
| 14 | Right main body | 1 | 010804002 | 26 | Hinge pin | 1 | 010804003 |
| 15 | 3.1/2-4.1/2 insert retainer plate | 4 | 010802014 | 27 | Grease fitting | 1 | 1/8 |
| 5 insert retainer plate | 4 | 010802015 | 28 | 3.1/2 insert | 24 | 001605089 | |
| 5.1/2 insert retainer plate | 4 | 010802016 | 4 insert | 24 | 001605090 | ||
| 6.5/8 insert retainer plate | 4 | 010802017 | 4.1/2 insert | 24 | 001605091 | ||
| 7 insert retainer plate | 4 | 010802024 | 5 insert | 36 | 001605092 | ||
| 7.5/8 insert retainer plate | 4 | 010802026 | 5.1/2 insert | 36 | 001605093 | ||
| 16 | Inner hex-bolts | 4 | 1/2-13UNC | 6.5/8 insert | 48 | 001605094 | |
| 17 | Latch | 1 | 010804004 | 7 insert | 48 | 001605093 | |
| 18 | Latch spring | 1 | 030102010 | 7.5/8 insert | 48 | 001605095 | |
| 19 | 3.1/2-4.1/2 slip bodies | 4 | 010804014 | 29 | 3.1/2-7 setting ring retainer | 2 | 010802027 |
| 5-5.1/2 slip bodies | 4 | 010804015 | 7.5/8 setting ring retainer | 2 | 010804026 | ||
| 6.5/8-7 slip bodies | 4 | 010804016 | 30 | Retainer pin | 1 | 10*155 | |
| 7.5/8 slip bodies | 4 | 010804017 |
350/500 TON CASING SPIDER/ELEVATOR
Introduction
The 350 and 500 Ton Casing Elevator/Spider Units are pneumatically operated power tools, capable of handing casing sizes from 4.1/2 to 14 inches, with string loads of 3150KN(700,000 pounds) for the 350 ton unit and 4500KN(1,000,000 pounds) for the 500 ton unit.
These units have been refined and incorporate such engineering features as air powered operation with safety latch, and four independent slips as standard equipment. The main bodies can be dressed as a casing elevator or spider. The elevator consists of an upper unit using a bell guide and bottom guide. The lower unit is dressed as a Spider with a top guide that centers the Spider over the master bushing.
The elevator is attached to the derrick traveling block and hook with 350 or 500 ton standard API links.
The Spider locates directly on the pin drive master bushing (27.1/2 MSPC, 37.1/2 and 49.1/2 MPCH), and square drive master bushing (27.1/2 MSS), and will accommodate any other master bushing when used with an Adapter Plate of RT Company.
Operation
The Elevator/Spider operates form a single, 2 position control lever that raises and lowers the slips. The slips are suspended on two inter-locking leveling beams that are driven by four air cylinders. This feature allows the slips to operate in synchronization in both the set and raised positions, while permitting the cylinders to work together so no one cylinder overrides any other, causing misalignment and binding. A manual override system is also provided in the event of a temporary loss of rig air pressure.
The pneumatic system incorporates a filter-regulator, which regulates and filters the rig air and reduces the pressure to the requirements of the Elevator /Spider system. This filtered, regulated air pressure is then sent to the lubricator (mounted on the Elevator and Spider) to add a small amount of oil mist to lubricate the four drive cylinders. The air from the lubricator is sent to the control valve that operates the leveling beams. As directed by the control lever, the air cylinder will raise or lower the slips attached to the leveling beam.
The direct airs lift and lock mechanism enables instant actuation of the slips. In offshore or land operations this allows the derrick man or the men on the floor to raise and lock the slips, or lower the slips in the elevator or spider instantly.
Main Technical Parameters
Table 1
| Spec Item | American Units | Metric | ||
| 500 | 350 | 500 | 350 | |
| Casing Size-range | 4.1/2″ ~ 14″ | 114 mm ~ 355.6 mm | ||
| Maximum Safe Hook Load | 1,000,000 lbs | 700,000 lbs | 455,000kg | 318,000kg |
| Normal Operating Pressure | 70-80 PSI | 4.8-5.4 atm | ||
| Maximum Pressure | 125 PSI | 8.5 atm | ||
Table 2
| Unit Height | American Units | Metric | ||
| 500 | 350 | 500 | 350 | |
| Elevator with Bell Guide （Less Guide and Slip Assy.） | 4,265 lbs | 3,600 lbs | 1,941 kg | 1,634 kg |
| Spider （Less Guide and Slip Assy.） | 4,065 lbs | 3,400 lbs | 1,850 kg | 1,543 kg |
Table 3
| Unit Height | American Units | Metric | |||
| 500 | 350 | 500 | 350 | ||
| Elevator with Bell Guide | 43 | 38 | 109.2 cm | 96.5 cm | |
| Spider with Guide | 37 | 32 | 94 cm | 81.0 cm | |
| Bell Guide | 10 | 10 | 25.4 cm | 25.4 cm | |
| Unit Diameter (Max.) | 50 | 42.1/2 | 127.5 cm | 107.9 cm | |
Table 4
| Adapter Plate (27.1/2) | American Units | Metric |
| Dimensions | 41.1/2″×41.1/2″×3.1/2″ | 1055mm×1055mm×89mm |
| Weight | 1000 lbs | 455 kg |
Table 5
| Casing Size(in) | Slip Body Size | Inserts | Number | Beveled Inserts | Number |
| 4.1/2 | 5.1/2 | 2168 | 32 | 2168B | 16 |
| 5 | 2169 | 32 | 2169B | 16 | |
| 5.1/2 | 2170 | 48 | |||
| 6.5/8 | 7.5/8 | 2632 | 48 | 2632B | 24 |
| 7 | 2623 | 48 | 2623B | 24 | |
| 7.5/8 | 2633 | 72 | |||
| 7.3/4 | 2649 | 72 | |||
| 8.5/8 | 9.5/8 | 2640 | 64 | 2640B | 32 |
| 8.3/4 | 2650 | 64 | 2650B | 32 | |
| 9.5/8 | 2633 | 96 | |||
| 9.3/4 | 2649 | 96 | |||
| 9.7/8 | 2649 | 96 | |||
| 10.3/4 | 11.3/4 | 2640 | 80 | 2640B | 40 |
| 10.7/8 | 2650 | 80 | 2650B | 40 | |
| 11.3/4 | 2637 | 120 | |||
| 11.7/8 | 2651 | 120 | |||
| 13.3/8 | 14 | 2636 | 80 | 2636B | 40 |
| 13.1/2 | 2652 | 80 | 2652B | 40 | |
| 13.5/8 | 2653 | 80 | 2653B | 40 | |
| 13.3/4 | 2655 | 80 | 2655B | 40 | |
| 14 | 2635 | 120 |
SPARE PART LIST FOR SE 350 TON CASING ELEVATOR/SPIDER
| NO. | PART NO. | DESCRIPTION | QTY. |
| 1 | 000808 | Top Guide | EACH 2 |
| 2 | BOLT, Hex Head 3/4-10 UNC×2 | 6 | |
| 3 | LOCKWASHER 3/4 | 8 | |
| 4 | 010807010 | Cover | 2 |
| 5 | 010807008 | LINK PIN, Upper | 4 |
| 6 | 010807009 | LINK, Slip Hanger | 4 |
| 7 | NUT, Hex, 1.1/4″-12UNF | 4 | |
| 8 | LOCKWASHER 1.1/4 | 4 | |
| 9 | FLATWASHER 1.1/4 | 4 | |
| 10 | 010807007 | LEVELING BEAM | 2 |
| 11 | LINK PIN, Lower | 4 | |
| 12 | 010808005 | SCREW,Link retainer | 2 |
| 13 | 1/8 NPT GREASE FITTING | 2 | |
| 14 | SLIP SEGMENT | ||
| 15 | BOLT, SOCKET HEAD 3/4-10 UNC×2 | 2 | |
| 16 | 010807065 | BUTTON,Register | 2 |
| 17 | 010807066 | GUIDE,KEEPER | 4 |
| 18 | BOLT,Hex Head,1-8UNC×2.1/2 | 4 | |
| 19 | LOCKWASHER 1 | 4 | |
| 20 | GUIDE RING | EACH 2 | |
| 21 | 010807011 | BELL GUIDE | 2 |
| 22 | 010808001 | BODY | 2 |
| 23 | BOLT,Hex Head, 5/8 UNC×2 | 8 | |
| 24 | LOCKWASHER 5/8″ Dia. | 8 | |
| 25 | 010807071 | LYNCH PIN | 4 |
| 26 | COTTER PIN 5×40 | 8 | |
| 27 | HINGE PIN, Removable | 1 | |
| 28 | 010808006 | HINGE PIN, Stationary | 1 |
| 29 | BOLT, Hex Head,1/2-13UNC×1 | 10 | |
| 30 | LOCKWASHER 1/2 | 18 | |
| 31 | 010807074 | LUBRICATOR MOUNTING BRACKET | 1 |
| 32 | BOLT, Hex Head,1/2-13UNC×1.1/2 | 8 | |
| 33 | 010807075 | RETAINER CYLINDER | 8 |
| 34 | 010808003 | BRACKET, Latch | 2 |
| 35 | 010808002 | Latch,Retainer | 2 |
| 36 | 010808004 | PIN | 2 |
| 37 | NUT 1.1/8-8UN | 2 | |
| 38 | 010807076 | CONTROL VALVE and LATCH ASSEMBLY | 4 |
| 39 | 010807068 | PIN,PIVOT | 1 |
| 40 | COTTER PIN 3.2×40 | 3 | |
| 41 | 010807069 | MANUAL CONTROL BRACKET | 1 |
| 42 | 010807070 | SOCKET,MANUAL LIFT | 1 |
| 43 | CYLINDER | 4 |
TYPE SE 350 TON GUIDES, SLIPS ASSEMBLIES AND INSERT NUMBERS
| Casing Size (Inches) | Elevator Bottom Guide No. | Spider Top Guide No. | Slip Set P/N | Insert Set P/N | Slip Body Size(in.) |
| 4.1/2 | 010807025 | 010807012 | 010808008 | 2168-16B-24 | 5.1/2 |
| 5 | 010807026 | 010807013 | 010808009 | 2169-16B-24 | 5.1/2 |
| 5.1/2 | 010807027 | 010807014 | 010808010 | 2170-40 | 5.1/2 |
| 5.3/4 | 010807027 | 010807014 | 010808034 | 2170-40 | 5.1/2 |
| 6.5/8 | 010807028 | 010807015 | 010808011 | 2632-24B-36 | 7.5/8 |
| 7 | 010807028 | 010807015 | 010808012 | 2623-24B-36 | 7.5/8 |
| 7.5/8 | 010807029 | 010807016 | 010808013 | 2633-60 | 7.5/8 |
| 7.3/4 | 010807029 | 010807016 | 010808014 | 2649-60 | 7.5/8 |
| 8.5/8 | 010807030 | 010807017 | 010808015 | 2640-32B-48 | 9.5/8 |
| 8.3/4 | 010807030 | 010807017 | 010808016 | 2650-32B-48 | 9.5/8 |
| 9.5/8 | 010807031 | 010807018 | 010808017 | 2633-80 | 9.5/8 |
| 9.3/4 | 010807032 | 010807019 | 010808018 | 2649-80 | 9.5/8 |
| 9.7/8 | 010807032 | 010807019 | 010808019 | 2649-80 | 9.5/8 |
| 10.3/4 | 010807033 | 010807020 | 010808020 | 2640-40B-60 | 11.3/4 |
| 10.7/8 | 010807033 | 010807020 | 010808021 | 2650-40B-60 | 11.3/4 |
| 11.3/4 | 010807034 | 010807021 | 010808022 | 2637-100 | 11.3/4 |
| 11.7/8 | 010807034 | 010807021 | 010808023 | 2651-100 | 11.3/4 |
| 13.3/8 | 010807035 | 010807022 | 010808024 | 2636-40B-60 | 14 |
| 13.1/2 | 010807036 | 010807023 | 010808025 | 2652-40B-60 | 14 |
| 13.5/8 | 010807036 | 010807023 | 010808026 | 2653-40B-60 | 14 |
| 13.3/4 | 010807036 | 010807023 | 010808027 | 2655-40B-60 | 14 |
| 14 | 010807037 | 010807024 | 010808011 | 2635-100 | 14 |
Note: Numbers followed by the letter “B” indicate beveled inserts