Description
NATIONAL OILWELL VARCO ROTARY AND HANDLING TOOLS PARTS LIST | ||
Table of Contents | ||
SECTION 1: POWER TOOLS | ||
SSW 10 SPINNING WRENCH ASSEMBLY | 1.4 | |
SSW 10 DIRECTIONAL CONTROL VALVE | 1.1 | |
SSW 10 AIR MOTOR | 1.11 | |
SSW 10 AIR CYLINDER | 1.13 | |
SSW 30 SPINNING WRENCH | 1.14 | |
SSW 30 PIVOT ARMS, CYLINDER, BEAMS AND PRESSURE ROLLERS | 1.15 | |
SSW 30 COVER AND VALVE | 1.16 | |
SSW 30 HYDRAULIC INSTALLATION | 1.18 | |
SSW 30 DRIVE ROLLERS AND HYDRAULIC MOTOR INSTALLATION | 1.2 | |
SSW 30 VERTICAL POSITIONING INSTALLATION | 1.21 | |
SSW40 LIFT CYLINDER ASSEMBLY | 1.22 | |
SSW40 CONTROLS AND LEFT BODY | 1.23 | |
SSW40 GEAR TRAIN | 1.24 | |
SSW40 GEAR TRAIN ASSEMBLY | 1.25 | |
SSW40 FILTER ASSEMBLY | 1.26 | |
SSW40 MANIFOLD ASSEMBLY | 1.27 | |
SSW40 PNEUMATIC SYSTEM INSTALLATION | 1.28 | |
SSW40 CONTROL VALVES | 1.29 | |
SSW40 AIR MOTOR ASSEMBLY | 1.3 | |
SSW40 LIFT CYLINDER | 1.31 | |
6600 AND 6800 KELLY SPINNERS | 1.32 | |
CONTROL BOX ASSEMBLY | 1.4 | |
CHAIN ASSEMBLY | 1.42 | |
HOSE ASSEMBLY | 1.42 | |
GOOSENECK ASSEMBLY | 1.42 | |
TW 61 HYDRAULIC TORQUE WRENCH | 1.43 | |
HKB HYDRAULIC POWER UNITS | 1.44 | |
SECTION 2: HOOKS DYNAPLEX | ||
DYNAPLEX HOOKS | 2.2 | |
HOUSING ASSEMBLY DYNAPLEX HOOKS | 2.3 | |
BODY ASSEMBLY DYNAPLEX | 2.4 | |
SNUBBER ASSEMBLY, | 2.5 | |
DYNAPLEX MODELS 5350, 5500 AND 5750 | 2.5 | |
SNUBBER ASSEMBLY, | 2.5 | |
DYNAPLEX MODEL 51000 | 2.5 | |
POSITIONER AND SWIVEL LOCK ASSEMBLY, DYNAPLEX MODELS 5500, 5750, 51000 | 2.6 | |
POSITIONER ASSEMBLY, DYNAPLEX MODEL 5350 | 2.6 | |
SWIVEL LOCK ASSEMBLY, DYNAPLEX MODEL 5350 | 2.6 | |
DIMENSIONAL DATA DYNAPLEX HOOKS | 2.7 | |
SPARE PARTS FOR ONE YEAR’S OPERATION DYNAPLEX HOOKS | 2.8 | |
DIMENSIONAL DATA DYNAPLEX HOOKS – EMSCO AND OILWELL BLOCK COMBINATIONS | 2.8 | |
SECTION 4: ELEVATORS CHART | ||
COLLAR TYPE CENTER LATCH ELEVATORS A SERIES | 4.2 | |
SLIP TYPE ELEVATORS Y SERIES | 4.2 | |
18° CENTER LATCH ELEVATOR G SERIES (with wear bushing) | 4.3 | |
18° CENTER LATCH ELEVATOR G SERIES | 4.3 | |
AUXILIARY ELEVATORS S SERIES | 4.4 | |
COLLAR TYPE SIDE DOOR ELEVATORS X SERIES | 4.4 | |
SJH HORIZONTAL PICK UP ELEVATORS SERIES | 4.5 | |
DOUBLE HINGED SINGLE JOINT ELEVATORS SJX SERIES | 4.5 | |
HOW TO USE THE BORE CHARTS | 4.6 | |
DRILL PIPE BORE CODES | 4.7 | |
DRILL PIPE BORE CODES (CONTINUED) | 4.8 | |
DRILL PIPE BORE CHART | 4.8 | |
PLAIN DRILL COLLARS WITH LIFT PLUGS BORE CHART | 4.9 | |
DRILL COLLARS WITH ZIP LIFT RECESS BORE CHART | 4.9 | |
COLLAR TYPE DRILL PIPE | 4.1 | |
BORE CHART | 4.1 | |
CASING BORE CHART | 4.1 | |
TUBING BORE CHART | 4.1 | |
SECTION 5: MANUAL ELEVATORS | ||
HYC, MYC, YC ELEVATORS | 5.3 | |
YT AND HYT ELEVATORS | 5.6 | |
YT SLIP TUBING ELEVATOR | 5.6 | |
HYT TUBING ELEVATOR | 5.6 | |
YT AND HYT ELEVATORS PARTS LIST | 5.7 | |
MYT ELEVATORS | 5.9 | |
MYT SLIP TUBING ELEVATOR | 5.9 | |
COLLAR TYPE ELEVATORS A SERIES | 5.11 | |
G SERIES ELEVATORS | 5.13 | |
18° TYPE ELEVATORS G SERIES | 5.15 | |
SIDE DOOR TYPE ELEVATORS X SERIES | 5.16 | |
SLX SERIES ELEVATORS | 5.16 | |
PARTS LIST SLX SERIES | 5.17 | |
SIDE DOOR TYPE ELEVATORS X SERIES | 5.17 | |
DIMENSIONS SSD SERIES | 5.18 | |
SX SERIES ELEVATORS | 5.19 | |
PARTS LIST SX SERIES | 5.2 | |
SLX DD SERIES ELEVATORS | 5.21 | |
PARTS LIST SLX DD | 5.22 | |
SJL AND SPL SERIES ELEVATORS | 5.23 | |
SJL/SPL LIFT SLING | 5.23 | |
PARTS LIST SPL | 5.24 | |
PARTS LIST SJH | 5.29 | |
SECTION 6: AIR OPERATED ELEVATORS | ||
AIR OPERATED ELEVATORS – MGG, GG, HGG | 6.3 | |
AIR OPERATED ELEVATORS – TA | 6.6 | |
AIR OPERATED ELEVATORS – HYC | 6.8 | |
SECTION 7: CASING ELEVATOR/SPIDERS/FLUSH MOUNTED SLIPS | ||
BJ TYPE ELEVATOR SPIDER 7 7/8″ 250TON | 7.2 | |
BJ TYPE ELEVATOR SPIDER 135/8″ 350 TON | 7.3 | |
VARCO TYPE ELEVATOR SPIDER 14″ 500 TON | 7.4 | |
VARCO TYPE ELEVATOR SPIDER 24/” 500 TON | 7.5 | |
VARCO TYPE ELEVATOR SPIDER 14″ 750 TON | 7.6 | |
VARCO TYPE ELEVATOR SPIDER 24 /” 750/1000 TON | 7.7 | |
250 TON ELEVATOR/SPIDER ASSEMBLY | 7.8 | |
MANUAL TO AIR CONVERSION KIT PN5000626 | 7.1 | |
350 TON ELEVATOR/SPIDER ASSEMBLY | 7.12 | |
500 TON ELEVATOR/SPIDER ASSEMBLY 14″ | 7.14 | |
500 TON ELEVATOR/SPIDER ASSEMBLY 14″ | 7.15 | |
500 TON ELEVATOR/SPIDER ASSEMBLY 24 /” | 7.16 | |
750 TON ELEVATOR/SPIDER ASSEMBLY 14″ | 7.18 | |
750/1000TON ELEVATOR/SPIDER ASSEMBLY 24 /” | 7.2 | |
FLUSH MOUNTED SLIP FMS 275/375 | 7.22 | |
FLUSH MOUNTED SLIP FMS 375 | 7.23 | |
SECTION 8: BUSHINGS, SLIPS, CLAMPS | ||
CU, CUL AND CB CASING BUSHINGS | 8.2 | |
200 TON HINGED CASING SPIDERS, INSERT BUSHINGS AND UC-3 SLIPS | 8.3 | |
UC-3 CASING SLIPS | 8.3 | |
CASING SPIDERS | 8.3 | |
ROLLER KELLY BUSHINGS | 8.4 | |
KELLY BUSHINGS, MASTER BUSHINGS | 8.5 | |
MASTER BUSHING SELECTION CHART | 8.6 | |
MASTER BUSHINGS | 8.6 | |
ROTARY SLIPS, CASING SLIPS | 8.7 | |
CIRCULAR BUTTONS | 8.8 | |
MULTIPURPOSE SAFETY CLAMP | 8.9 | |
PS 15 AND PS 16 POWER SLIPS | 8.1 | |
PS 16 POWER SLIP | 8.11 | |
LATCH LOCK ASS’Y | 8.12 | |
PS 16 POWER SLIP | 8.13 | |
SECTION 9: HT MANUAL TONGS | ||
UNIT DIMENSIONS, DIMENSIONAL DATA | 9.2 | |
PARTS LIST HT 14 MANUAL TONG | 9.4 | |
PARTS LIST HT 14 MANUAL TONG | 9.5 | |
PARTS LIST HT 35 MANUAL TONG | 9.6 | |
PARTS LIST HT 55 MANUAL TONG | 9.8 | |
PARTS LIST HT 65 MANUAL TONG | 9.1 | |
PARTS LIST HT 100 MANUAL TONG | 9.12 | |
PARTS LIST HT 200 MANUAL TONG | 9.14 | |
PARTS LIST HT 50 CASING HEAD ASSEMBLIES | 9.16 | |
SECTION 10: SYSTEM 21 | ||
BX HYDRAULICALLY ACTUATED ELEVATOR AND UNIVERSAL ROTATOR | 10.2 | |
RATING VS. STRENGTH OF PIPE | 10.3 | |
BUSHING OVERVIEW | 10.4 | |
PS21/30 HYDRAULIC POWER SLIP | 10.7 | |
PS21 SIZE COMPONENTS DATA | 10.8 | |
PS 30 SIZE COMPONENTS DATA | 10.9 | |
RST ROTARY SUPPORT TABLE | 10.1 | |
CRT 500 CASING RUNNING TOOL | 10.11 | |
CRT 350 CASING RUNNING TOOL | 10.12 | |
PATENT INFO | 10.13 | |
POWER TOOLS | ||
SSW 10 SPINNING WRENCH PARTS LIST | ||
SSW 10 SPINNING WRENCH ASSEMBLY | ||
Item | Description | Part 1 |
A | SSW 10 assembly with 31/2″ rollers | 10426-35 |
B | SSW 10 roller assembly, pressure 31/2″ | 12035 |
A | SSW 10 assembly with 4″ rollers | 10426-40 |
B | SSW 10 roller assembly, pressure 42″ | 12040 |
A | SSW 10 with 41/2″ rollers | 10426-45 |
B | SSW 10 roller assembly, pressure 41/2″ | 12045 |
A | SSW 10 assembly with 5″ rollers | 10426-50 |
B | SSW 10 roller assembly, pressure 5″ | 12050 |
A | SSW 10 with 51/2″ rollers | 10426-55 |
B | SSW 10 roller assembly, pressure 51/2″ | 12055 |
1 | Safety chain shackle | 6500 |
2 | Cotter pin | 51402-10 |
3 | Hanger pin | 10445 |
4 | Spring hanger | 15060 |
5 | Screw | 50005-28-C8 |
6 | Lock washer | 50905-C |
7 | Handle support | 15144 |
8 | Pipe reducing bushing | 52820-16-G |
9 | Swivel joint | 11934 |
Air hose assembly | 10659 | |
Safety chain assembly | 13067 | |
10 | Chain shackle | 17265 |
11 | Safety chain | 6912 |
12 | Band | 13499 |
13 | Screw | 1132592 |
14 | Self locking nut | 51804-C |
15 | Air line assembly | 10659-1 |
16 | Pipe reducing bushing | 52824-20-G |
17 | Lubricator | 6598 |
Regulator assembly | 14119 | |
18 | Pipe reducing bushing | 52824-20-G |
19 | Nipple | 53920-G |
20 | Air regulator and gauge | 14073 |
21 | Filter | 6599 |
22 | Spinning wrench | |
23 | Socket head cap screw | 50010-16-C8 |
24 | Hex jam nut | 50310-C |
25 | Hanger | 10452 |
Item | Description | Part No. |
1 | 37° Extended pipe connector | 56501-8-8-S |
2 | 90° Street elbow | 52408-G |
3 | Nipple | 104447 |
Bracket assembly | 10448 | |
4 | Bracket weldment | 15080 |
5 | Pipe support | 14776 |
6 | Flat washer | 50805-R-C |
7 | Lock washer | 50905-C |
8 | Hex head screw | 50005-6-C8 |
9 | Lockwasher | 50910-C |
10 | 37° Extended pipe connector | 56501-8-8-S |
11 | Short cylinder air line | 10469 |
12 | 90° Extended pipe elbow | 56506-12-8-S |
13 | Long cylinder air line | 10470 |
Airline | 10471 | |
14 | Tube | 13255 |
15 | Adapter | 56521-8-8-S |
16 | In-line check valve | 52824-20-G |
17 | Elbow male/female | 52408-G |
Regulator assembly | 14119 | |
18 | Hi-collar lockwasher | 51104-C |
19 | Socket head cap screw | 50104-18-C |
20 | Directional control valve | 12070 |
21 | Muffler | 10743 |
22 | Guard | 11152 |
23 | Hex head cap screw | 50008-26-C8 |
24 | Lockwasher | 50908-C |
25 | Hex head cap screw | 50008-12-C8 |
26 | Lockwasher | 50908-C |
27 | Gear cover | 10429 |
28 | Gear cover gasket | 10475 |
29 | Cotter pin | 51403-12 |
30 | Slotted hex nut | 50512-C |
31 | Retaining washer | 10664 |
32 | Drive gear | 10628 |
33 | Spacer | 10451 |
34 | Socket head cap screw | 55110-20-CA |
35 | Hi-collar lockwasher | 51110-C |
36 | Idler gear shaft | 10630 |
37 | Dowel pin | 51205-14 |
38 | Idler gear roller bearing | 10658 |
39 | Idler gear | 10629 |
40 | Thrust washer | 10660 |
41 | Spinning wrench assembly | |
42 | Air motor gasket | 10632 |
43 | Drive gear key | 10454 |
44 | Air motor assembly | 14855 |
45 | Valve tube | 16978 |
46 | Inline check valve | 17021 |
47 | 37° Extended pipe connector | 56501-6-8-S |
48 | Valve tube | 17001 |
49 | 37° Extended pipe elbow | 56506-8-8-S |
50 | Hex head cap screw | 50008-16-C5 |
51 | Drain plug | 72918 |
Item | Description | Part No. |
Spinning Wrench consisting of: | ||
1 | Hex head screw | 50005-10-C |
2 | Lock washer | 50905-C |
3 | Bearing cover | 12053 |
4 | Bearing cover gasket | 10882 |
5 | Slotted hex nut | 50512-C |
6 | Cotter pin | 51403-12 |
7 | Retaining washer | 12082 |
8 | Thrust bearing | 12083 |
9 | Drive shaft spacer | 12088 |
10 | Bearing housing | 12081 |
11 | Roller bearing | 12047 |
12 | Retaining ring | 53500-325 |
13 | Name plate | 10631 |
14 | Drive screw | 53301-10-6 |
15 | Pin | 11933 |
16 | Grease fitting | 53203 |
17 | Air cylinder | 10462 |
18 | Rod end cylinder | 104325 |
19 | Retaining washer | 10664 |
20 | Gear | 10628 |
21 | Gear spacer | 12084 |
22 | Body assembly | 11950 |
23 | Dowel | 51206-7 |
Drive roller shaft assembly consisting of: | 13068 | |
24 | Inner race | 12051 |
25 | Drive roller shaft | 12054 |
26 | Drive roller key | 10453 |
27 | Drive gear key | 13180 |
28 | Drive roller | 10435 |
29 | Drive roller seal | 10742 |
30 | Clevis link | 10431 |
31 | Adjustable link assembly | 11932 |
32 | Grease fitting | 53204 |
33 | Roller detent pin | 10549 |
Roller arm assembly consisting of: | 11930 | |
34 | Roller arm | 10428 |
35 | Grease fitting | 53201 |
36 | Dowel pin | 51204-6 |
37 | Pressure roller pin | 15126 |
38 | Grease fitting | 53201 |
39 | Hinge pin clip | 10576 |
40 | O-ring | 51300-3477-B |
41 | Roller assembly 3-1/2″ | 12035 |
Roller assembly 4″ | 12040 | |
Roller assembly 4-1/2″ | 12045 | |
Roller assembly 5″ | 12050 | |
Roller assembly 5-1/2″ | 12055 | |
Bearing | 72380 | |
Thrust washer | 10439 | |
SSW 10 DIRECTIONAL CONTROL VALVE | ||
DESCRIPTION | PART NO. | |
Valve | 12070 | |
Valve button operator kit | 13000 | |
Button | 12070-1 | |
Shaft | 12070-2 | |
Screw | 50104-10-S | |
Washer | 50904-C | |
End cover | 12070-4 | |
Cap screw | 50103-5-C | |
Adapter | 12070-5 | |
Cushion piston | 12070-3 | |
O-ring | 51300-123-B | |
Body | 12070-7 | |
Body seal kit | 30013001 | |
Spacer | 12070-9 | |
Spacer sealing ring | 12070-6 | |
Guide end | 12070-10 | |
Spool | 12070-8 | |
SSW 10 AIR MOTOR ASSEMBLY | ||
DESCRIPTION | PART NO. | |
Air motor assembly | 14855 | |
Screw | 14857 | |
Muffler | 15063 | |
Air motor | 14694 | |
Direction/caution label | 16041 | |
Knob | 11915 | |
Shaft | 15255 | |
Collar | 15333 | |
Socket head set screw | 50706-7-A | |
Socket head set screw | 50706-4-A-C | |
O-ring | 51300-33-B | |
Direction/caution label | 16042 | |
Sleeve | 15335 | |
Socket head cap screw | 50103-5-C | |
Front collar | 15334 | |
Cover | 14856 | |
Lock washer | 50905-C | |
Hex head cap screw | 50005-6-C | |
Relief valve | 6581 | |
Bushing | 52804-2-G | |
SSW 10 AIR MOTOR | ||
DESCRIPTION | PART NO. | |
Item | Description | Part no. |
Motor, consisting of: | ||
1 | Oil plug | 14894-23 |
2 | O-rinq | 51300-112-B |
3 | Nut | 14694-22 |
4 | Screw | 50105-12 |
5 | Hi-collar lockwasher | 51105-C |
6 | Housing cover | 14694-24 |
7 | Cover gasket | 14694-25 |
8 | Bearing clamp screw | 14694-32 |
9 | Bearing clamp nut | 14694-34 |
10 | Bearing | 14694-32 |
11 | Motor housing | 14694-19 |
12 | Fiber insert nut | 14694-28 |
13 | Gasket | 14694-29 |
14 | Ball bearing | 14694-66 |
15 | Transfer plate | 14694-55 |
16 | Bolt | 14694-30 |
17 | Gear case gasket | 14694-65 |
18 | Hex head cap screw | 55005-10 |
19 | Gear case | 14694-68 |
20 | Roller bearing | 14694-69 |
21 | Oil seal | 14694-70 |
22 | Spindle gear | 14694-51 |
23 | Gear spacer | 14694-54 |
24 | Ball bearing | 14694-47 |
25 | Feed post | 14694-20 |
26 | Spindle | 14694-57 |
27 | Ring gear key | 14694-58 |
28 | Pinion shaft | 14694-64 |
29 | Sleeve needle bearing | 14694-63 |
31 | Ball bearing | 14694-59 |
32 | Gear spindle | 14694-53 |
33 | Ball bearing | 14694-60 |
34 | Ball bearing | 14694-52 |
35 | Pinion | 14694-50 |
36 | Gear | 14694-49 |
37 | Ball bearing | 14694-48 |
38 | Reverse valve sleeve | 14694-12 |
39 | Set screw | 14694-14 |
40 | Throttle valve | 14694-4 |
45 | Throttle stem roller | 14694-10 |
46 | Roller pin | 14694-9 |
47 | Air handle | 14694-16 |
48 | O-ring | 51300-216-B |
49 | Reversing sleeve | 14694-13 |
50 | Universal joint | 14694-15 |
51 | Reverse valve | 14694-18 |
52 | Fiber insert nut | 14694-28 |
53 | Throttle gasket | 14694-17 |
54 | Lower end plate | 14694-41 |
55 | Blade rotor | 14694-39 |
56 | Rotor (8 teeth) | 14694-38 |
57 | Bearing spacer | 14694-40 |
58 | Liner | 14694-35 |
59 | Upper end plate | 14694-33 |
60 | Liner dowel pin | 14694-36 |
62 | Ring (48 teeth) gear | 14696-67 |
63 | O-ring | 51300-212-B |
66 | Seat valve | 14694-8 |
67 | Cover plate | 14856 |
68 | Hex head cap screw | 50005-6-C |
69 | Lock washer | 50905-C |
Throttle valve assembly consisting of: | 14694-71 | |
41 | Throttle spring | 14694-3 |
42 | Retainer sleeve | 14694-11 |
43 | Throttle sleeve | 14694-2 |
44 | Throttle cap | 14694-1 |
61 | Throttle valve seal | 14694-7 |
64 | Fiber insert nut | 14695-5 |
65 | Seal washer | 14694-6 |
SSW 10 AIR CYLINDER | ||
Item | Description | Part no. |
1 | Air cylinder consisting of: | 10462 |
Tie rod nut | 51910-C | |
2 | Blind end head | 10462-12 |
3 | Piston rod locknut | 10462-12 |
4 | Piston | 10462-10 |
5 | Rod tie | 10426-14 |
6 | Cylinder body | 10462-9 |
7 | Rod piston | 10426-8 |
8 | Rod end head | 10426-13 |
9 | Packing adapter | 10426-4 |
10 | Bearing | 10426-16 |
11 | Bearing retainer | 10426-15 |
12 | Packing nut | 10426-2 |
13 | Hex head bolt | 55004-5-H |
Seal kit | 13652 | |
14 | consisting of: | 10462-1 |
Rod assembly scraper | ||
15 | Rod packing | 10462-3 |
16 | O-ring | 51300-016-B |
17 | Piston packing | 10462-3 |
18 | O-ring | 51300-167-B |
SSW 30 SPINNING WRENCH | ||
SSW 30 PIVOT ARMS, CYLINDER, BEAMS AND PRESSURE ROLLERS | ||
SSW 30 19000-6 consisting of: | ||
Pivot arm | 19008 | |
Pivot pin | 13714 | |
Spherical roller bearing | 13712 | |
Cotter pin | 51404-20-S | |
Grease fitting | 53201 | |
Roll pin | 51604-6-C | |
Pressure roller assembly | 73897 | |
Plastic plug | 53424 | |
Pressure roller bearing | 73789 | |
Wiper ring | 18297 | |
Trust washer | 73790 | |
Inner spacer | 73792 | |
Outer spacer | 73793 | |
73895 | ||
73929 | ||
Pressure roller pin | 15126 | |
Cotter pin | 51404-20-S | |
Grease fitting | 53201 | |
Roll pin | 51604-6-C | |
Cylinder assembly | 19065 | |
Hydraulic cylinder | 74986 | |
Cylinder link | 19064 | |
Back cylinder plate | 19029 | |
90° O-ring boss/37° | 56519-12-12-S | |
O-ring boss/37° | 56529-12-12-S | |
Roll pin | 51604-6-C | |
Seal kit | 70109 | |
Left beam | 19009-1 | |
Right beam | 19009-2 | |
Pivot pin | 19007-1 | |
Cotter pin | 51404-20-S | |
Roll pin | 51604-6-C | |
Grease fitting | 53201 | |
Pivot pin | 19007 | |
Cotter pin | 51402-20-S | |
Grease fitting | 19783 | |
SSW 30 COVER AND VALVE | ||
Item | Description | Part no. |
_ | SSW 30 | 19000 |
consisting of: Control valve assembly | 19057 | |
1 | Hydraulic control valve | 19022 |
2 | Check valve | 16672 |
3 | 90° Ext. pipe / 90° Elbow | 56506-4-4-S |
4 | Ext. pipe / 37° Connector | 56165-4-4-S |
5 | 45° Ext. pipe / 37° Elbow | 56502-4-4-S |
6 | O-ring boss / 37° Elbow | 56519-12-12-S |
7 | Cap plug | 53406 |
8 | Handle bracket | 19028 |
9 | Socket head cap screw | 50104-8-DA |
9 | Flat washer | 50804-R-C |
– | Lockwire (0.032 dia) | Z6000.8 |
10 | 45° O-ring boss / 37° Elbow | 56557-12-12-S |
11 | Cap plug | 53416 |
12 | Check valve/pilot tube | 19321 |
12 | Tube | 19321-1 |
12 | Tube / 37° sleeve | 56508-4-S |
12 | Short nut | 56509-4-S |
13 | Check valve/valve tube | 19322 |
13 | Tube | 19322-1 |
13 | Tube / 37° sleeve | 56508-4-S |
13 | Short nut | 56509-4-5 |
15 | Spin handle | 19024 |
15 | Lever | 19024-1 |
15 | Plate | 19024-2 |
15 | Knob | 13634 |
16 | Handle link | 19019-1 |
17 | Clevis pin | 56405-10-C |
18 | Flat washer | 50805-N-C |
19 | Cotter pin | 51401-4-S |
20 | Clevis pin | 56405-21-C |
21 | Cotter pin | 51433-4-C |
22 | Spin handle lock | 19026 |
23 | Compression spring | 19990 |
24 | Shoulder-lock bolt | 19349 |
25 | Plate orifice (0.204 dia) | 19797-1 |
26 | O-ring boss / 37° Elbow | 56519-12-12-S |
27 | Cap plug | 53416 |
– | Socket head cap screw | 50104-6-DA |
28 | Head cap screw | 50006-14-C8D |
29 | Lock washer | 50906-C |
30 | Top cover | 19876 |
31 | Mounting cover bracket | 19879 |
32 | Hex-head cap screw | 50008-6-C8 |
33 | Flat washer | 50808-N-C |
34 | Lock washer | 50908-C |
35 | Nameplate | 19062 |
36 | Caution label | 19320 |
37 | Drive screw | 55301-10-6 |
– | SSW 30 | 19000 |
– | Valve assembly | 19057 |
3 Spool (closed center) | ||
38 | Clamp handle | 19023 |
38 | Lever | 19023-1 |
38 | Knob | 13634 |
39 | Handle link | 19019-3 |
40 | Clevis pin | 56405-10-C |
41 | Flat washer | 50805-N-C |
42 | Cotter pin | 51401-4-S |
43 | Roll pin | 51633-6-C |
44 | Clevis pin | 19849 |
45 | Set screw | 19862 |
46 | Hex-head cap screw | 50006-8-C8 |
47 | Hex head nut | 50206-C |
48 | O-ring-boss / 37° Elbow | 56519-12-12-S |
49 | Cap plug | 53416 |
– | Socket head cap screw | 50104-6-DA |
50 | Lift handle | 19025 |
50 | Lever | 19025-1 |
50 | Knob | 13634 |
51 | Link handle | 19019-2 |
52 | Clevis pin | 56405-10-C |
53 | Flat washer | 50805-N-C |
54 | Cotter pin | 51401-4-S |
55 | Roll pin | 51633-6-C |
56 | Clevis pin | 19849 |
57 | Clevis pin | 56403-10-C |
58 | Flat washer | 50803-R-C |
59 | Cotter pin | 51401-4-S |
60 | O-ring boss / 37° | 56519-6-4-S |
61 | O-ring boss reducer | 56556-12-6-S |
62 | Plate orifice (0.062 dia) | 19797-2 |
– | Socket head cap screw | 50104-6-DA |
Parts for conversion to open center operation | ||
– | Control valve assembly | 19057 |
– | Detent kit | 71575 |
63 | Open center conv. plug | 18731 |
– | Socket head cap screw | 50104-14-CD |
SSW 30 HYDRAULIC INSTALLATION | ||
Item | Description | Part no. |
PRESSURE / RETURN SYSTEM | ||
1 | Quick disconnect dust cap | 55915-12 |
2 | Hydraulic pressure swivel | 19158 |
3 | Quick disconnect/pipe ext. | 55913-12-12 |
valved nipple | ||
4 | Quick disconnect dust cap | 55911-16 |
5 | Hydraulic return swivel | 70369 |
6 | Quick disc./pipe ext. valved nipple | 55913-16-16 |
– | Hex head cap screw | 55003-4-C8A |
7 | Pressure tube | 19031 |
7 | Tube | 19031-1 |
7 | Tube 37° sleeve | 56508-12-S |
7 | Short nut | 56509-12-S |
8 | Return tube | 19032 |
8 | Tube | 19032-1 |
8 | Tube 37° sleeve | 56508-12-S |
8 | Short nut | 56509-12-S |
CONTROL VALVE INSTALLATION | ||
– | 3 Spool (closed center) | 19057 |
consisting of: | ||
9 | Check valve/pilot tube valve assy | 19321 |
9 | Tube | 19321-1 |
9 | Tube 37° sleeve | 56508-4-S |
9 | Short nut | 56509-4-S |
10 | Check valve/valve tube | 19322 |
10 | Tube | 19322-1 |
10 | Tube 37° sleeve | 56508-4-S |
10 | Short nut | 56509-4-S |
11 | Check valve | 16672 |
12 | 90° ext. pipe/90° elbow | 56506-4-4-S |
13 | Ext. pipe / 37°. Connector | 56501-4-4-S |
14 | 45° Pipe / 37° elbow | 56502-4-4-S |
15 | 45° O-ring boss/37° elbow | 56557-12-12-S |
16 | Cap plug | 53416 |
ROLLER DRIVE SYSTEM | ||
– | Hydraulic motor assembly | 19055 |
consisting of: | ||
17 | O-ring boss / 37° Elbow | 56519-16-12-S |
18 | Spin-in tube | 19033 |
18 | Tube | 19033-1 |
18 | Tube 37° sleeve | 56508-12-S |
18 | Short nut | 56509-12-S |
19 | Spin-out tube | 19034 |
19 | Tube | 19034-1 |
19 | Tube / 37° sleeve | 56508-12-S |
19 | Short nut | 56509-12-S |
– | 3 spool (closed center) valve assy | 19057 |
20 | O-ring-boss / 37° elbow | 56519-12-12-S |
21 | Cap plug | 53416 |
Item | Description | Part no. |
CLAMPING SYSTEM | ||
22 | Clamp tube | 19035 |
22 | Tube | 19035-1 |
22 | Tube / 37° sleeve | 56508-12-S |
22 | Short nut | 56509-12-S |
23 | Unclamp tube | 19036 |
23 | Tube | 19036-1 |
23 | Sleeve | 56508-12-S |
23 | Short nut | 56509-12-S |
– | Cylinder assembly | 19065 |
24 | 90° O-ring boss / 37° elbow | 56519-12-12-S |
25 | O-ring boss 37° connector | 56529-12-12-S |
– | 3-Spool (closed center) | 19057 |
Valve assembly | ||
26 | O-ring boss / 37° elbow | 56519-12-12-S |
27 | Cap plug | 53416 |
VERTICAL POSITIONING SYSTEM | ||
– | Hydraulic cylinder | 15632 |
28 | Vertical positioning hose | 19323 |
28 | Low pressure hose | 56103-4 |
28 | Hose 90° Int. 37° swivel fitting | 56255-4-4 |
28 | Hose ext. pipe fitting | 56258-4-4 |
28 | Power clamp ferrule | 56256-4 |
28 | Protective coil sleeve | 56121-2 |
29 | Quick disc./int. pipe valved coupler | 55908-4-4 |
30 | Quick disc./int. pipe valved nipple | 55909-4-4 |
31 | 90° Pipe/pipe ext. elbow | 56702-6-4-S |
32 | Exhaust muffler | 70920 |
– | 3-Spool (closed center) valve assy | 19057 |
33 | O-ring-boss / 37° elbow | 56519-6-4-S |
34 | O-ring boss reducer | 56556-12-6-S |
35 | Orifice (0.062 dia.) plate | 19797-2 |
SSW 30 DRIVE ROLLERS AND HYDRAULIC MOTOR INSTALLATION | ||
Item | Description | Part no. |
_ | SSW 30 | 19000 |
1 | Machined body | 19010 |
2 | Hydraulic motor assembly | 19055 |
2 | Hydraulic motor | 19020 |
3 | Thrust washer | 19152 |
4 | Motor spacer | 19017 |
5 | Drive gear | 19015 |
6 | Retaining washer | 19153 |
7 | Motor stud | 19154 |
8 | Hex slotted nut | 55508_C |
9 | Cotter pin | 51402_8_S |
10 | O_ring boss / 37° elbow | 56519_16_12_S |
11 | Motor gasket | 13709 |
12 | Hex head cap screw | 50010_14_C8 |
13 | Lock tab washer | 70371 |
14 | Gear (machined) cover | 19053 |
15 | Gear cover gasket | 19054 |
16 | Hex head cap screw | 50008_10_C8 |
17 | Lock washer | 50908_C |
18 | Hex head ext. pipe plug | 53001_08_C |
19 | Idler gear | 10629 |
20 | Idler gear shaft | 10630 |
21 | Thrust washer | 10660 |
22 | Roller bearing | 10658 |
23 | Dowel pin | 51205_11 |
24 | Socket head set screw | 50706_6_A_C |
25 | Driver roller assembly | 80580 |
25 | Drive roller | 76003 |
26 | Drive roller shaft assembly | 75676 |
26 | Drive roller shaft | 19016 |
27 | Drive gear | 10628 |
28 | Retaining washer | 80581 |
29 | Driven gear key | 15062 |
30 | Hex slotted nut | 50512_C |
31 | Cotter pin | 51403_12_S |
32 | Drive roller key | 14560 |
33 | Drive roller seal | 10742 |
34 | Drive roller spacer | 14475 |
35 | Dowel pin | 51206_7 |
36 | Drive roller shield spacer | 80582 |
37 | O_ring | 51300_036_B |
38 | Bearing (machined) cover | 17934 |
39 | Bearing cover gasket | 75507 |
40 | Hex_head cap screw | 50005_6_C8 |
41 | Lock washer | 50905_C |
42 | Spherical roller bearing | 13698 |
43 | Retaining washer | 10664 |
44 | Cotter pin | 51403_12_S |
45 | Slotted hex nut | 50512_C |
46 | Hex head ext. pipe plug | 53001_16_C |
47 | Grease fitting | 53201 |
48 | Bearing cover | 75492 |
SSW 30 VERTICAL POSITIONING INSTALLATION | ||
Item | Description | Part no. |
SSW 30 | 19000 | |
1 | Hydraulic cylinder | 15632 |
2 | Vertical positioning hose | 19323 |
3 | Weldment hanger | 15060 |
3 | Spring guide | 15059 |
3 | Retaining plate | 15057 |
3 | Spring | 15058 |
4 | Lifting sling | 16614 |
5 | Machined hanger | 19038 |
6 | Hex head cap screw | 50010-26-C8 |
7 | Hex nut | 50210-C |
8 | Lock washer | 50910-C |
9a | Set screw | 50710-24-A-C |
9b | Hex nut (not shown) | 50310-C |
10 | 90°Pipe/pipe ext. | 56702-6-4-S |
11 | Quick disc/int. pipe valved coupler | 55908-4-4 |
12 | Quick disc/int. pipe valved nipple | 55909-4-4 |
13 | Vent breather | 70920 |
14 | Cable tie | 53300-526 |
SSW40 LIFT CYLINDER ASSEMBLY | ||
Item Qty Description Part no. | ||
1 Lift cylinder assembly 75341 | ||
2 1 Elbow, 90º, ext. pipe / 37º 56506-8-4-5 | ||
3 1 Filter 75937 | ||
4 1 Hanger 76543 | ||
5 1 Hanger rod 74242 | ||
6 2 Support washer 76256 | ||
7 2 External retaining ring 53600-156 | ||
8 1 Adjustment screw 50012-24-C8 | ||
1 Hex-jam nut 50312-C | ||
9 2 Pivot block cover 76230 | ||
10 2 Pivot block cover gasket 76231 | ||
8 Hex head cap screw 50006-10-C8D | ||
8 Regular lock washer 50906- C | ||
11 2 Stop 74241 | ||
2 Hex head cap screw 50010-10-C8 | ||
2 Regular lock washer 50910-C | ||
12 2 Machined hanger block 74610 | ||
13 2 Straight grease fitting 53201 | ||
14 2 Thrust washer 74611 | ||
15 2 Hanger block bushing 74612 | ||
16 2 Top-counter block 74584 | ||
17 1 Cap screw 74607 | ||
2 Socket head cap screw 50103-6-C | ||
2 Regular lock washer 50903-C | ||
18 1 Grease seal cap 74608 | ||
2 Socket head cap screw 50103-6-C | ||
2 Regular lock washer 50903-C | ||
19 1 O-Ring 51300-224-B | ||
20 1 O-Ring 51300-320-B | ||
21 1 Adjustment assy. handle 75166 | ||
22 1 Knurled knob 75049 | ||
23 1 Right pivot block 76172-1 | ||
24 1 Left pivot block 76172-2 | ||
25 1 Adjustment screw 74603 | ||
26 1 Adjustment screw sleeve 74709 | ||
27 2 External retaining ring 53600-334 | ||
SSW40 CONTROLS AND LEFT BODY | ||
Item Qty Description Part no. | ||
1 1 Bellows assembly 76237 | ||
2 1 Modified motor valve 76236 | ||
3 1 Lock-out bracket assy. 76247 | ||
3 Hex head cap screw 50004-24-C8 | ||
3 Regular lock washer 50904-C | ||
4 1 Lock-out arm assembly 73614 | ||
5 1 Spin-in/Spin-out instruction plate 75623 | ||
3 U-type drive screw 53301-10-6 | ||
6 1 Roll pin 51604-8-C | ||
7 1 Max. operating pressure plate 75474 | ||
2 U-type drive screw 53301-10-6 | ||
8* 2 Drain plug 53002-12-C | ||
9* 2 Fill plug 74565 | ||
10* 2 Check valve 74567 | ||
11 1 Caution label 19320 | ||
4 U-type drive screw 53301-10-6 | ||
12* 8 Grease fitting 53201 | ||
13 1 Lift/clamp manifold assy. 76142 | ||
14 1 Bottom guard 76099 | ||
3 Hex head cap screw 50008-38-C8 | ||
3 Regular lock washer 50908-C | ||
15 1 Left bearing cover 73066 | ||
16 1 Left body 73306 | ||
17 1 Left gear cover 73070 | ||
18* 4 Bellows bolt 74862 | ||
19 1 Storage warning decal 79227 | ||
20 1 Cover plate 200718 | ||
21 1 Left side frame cover 200716 | ||
3 Hex head cap screw 50008-6-C5 | ||
3 Regular lock washer 50908-C | ||
22 1 Mounting plate 200715 | ||
23 1 Valve assembly 200712 | ||
2 Hex head cap screw 50004-14-C8D | ||
A/R Lockwire 947879-8 | ||
SSW40 GEAR TRAIN | ||
Item | Description | Part no. |
1 | Shoulder ring | 75577 |
2 | Idler shaft | 75541 |
3 | Shaft compound | 75542 |
4 | Thrust washer | 73093 |
5 | Needle roller bearing | 75504 |
6 | Roller idler gear | 73084 |
7 | Motor compound gear | 74919 |
8 | Roller compound gear | 73085 |
9 | External retainer ring | 53600-100 |
10 | Shield spacer | 73449 |
11 | Roller gear | 201522 |
12 | Ball bearing | 73090 |
13 | Right gear cover | 73071* |
14 | Gear cover gasket | 73092 |
15 | Dowel pin | 51206-7 |
Hex head cap screw | 50006-7-C8 | |
Hex head cap screw | 50006-12-C8 | |
Regular lock washer | 50906-C | |
16 * | Right bearing cover | 73067 |
17 | Bearing cover gasket | 73094-1 |
Hex head cap screw | 50006-7-C58 | |
Regular lock washer | 50906-C | |
18 | Bearing retainer | 201523 |
Drilled hex head screw | 50006-7-C8D | |
Regular lock washer | 50906-C | |
Lock wire | 947879-8 | |
19 | Roller bearing | 73091 |
20 | Shield spacer | 76089 |
21 | O-Ring | 51300-152-B |
22 | Drive roller shaft | 201521 |
23 | Drive roller key | 73078-1 |
24 | Roller gear key | 75249 |
25 * | Extension spring | 73110 |
Hex head cap screw | 50010-20-C8 | |
Regular lock washer | 50910-C | |
26 * | Spring mountain bracket | 75752 |
* | Hex head cap screw | 50008-6-C8 |
* | Regular lock washer | 50908-C |
27 | Air motor | 74628 |
Drilled hex head screw | 50004-10-C8D | |
Regular lock washer | 50904-C | |
Lockwire | 947879-8 | |
28 | Muffler | 74233 |
29 | External retaining ring | 53600-181 |
30 | Motor gear | 74920 |
31 | Motor gear key | 74194 |
32 | Drive roller | 76570 |
33 | Internal retaining ring | 53500-354 |
34 * | Right body | 73307 |
35 | Locating pin | 75821 |
Roll pin | 51604-8-C | |
36 * | Nameplate | 74954 |
* | U-type drive screw | 53301-10-6 |
37 | Shackle with pin | 944514-9 |
38 * | Right frame cover | 200717 |
* | Hex head cap screw | 50008-6-C5 |
* | Regular lock washer | 50908-C |
SSW40 FILTER ASSEMBLY | ||
Filter, regulator, lubricator assembly | 74236 | |
Filter | 74236-1 | |
Regulator | 74236-2 | |
Lubricator | 74236-3 | |
Filter element kit | 74236-4 | |
Gauge | 74236-5 | |
Fill cap sight dome | 74236-6 | |
Close nipple | 53920-G | |
25 foot air hose | 76157 | |
SSW40 BELLOWS ASSEMBLY | ||
Description . | Part no. | |
Bellows actuator | 73115-1 | |
Long bolt | 76539 | |
Regular lock washer | 50905-C | |
Fine thread hex nut | 55205-C | |
Quick exhaust/muffler valve | 74238-2 | |
Quick exhaust adapter | 75553 | |
Ext. pipe / 37° connector | 56501-6-8-S | |
Clevis pin | 75121 | |
Cotter pin | 51402-8-S | |
Clevis link | 75828 | |
Center link | 75829 | |
Cylindrical bushing | 75874 | |
Flanged bushing | 75875 | |
Right end cap | 75830 | |
Clevis pin | 75835 | |
Cotter pin | 51402-8-S | |
Left end cap | 76234 | |
SSW40 MANIFOLD ASSEMBLY | ||
Description . | Part no. | |
Clamp valve | 76140 | |
Socket head cap screw | 50104-14-C | |
Regular lock washer | 50904-C | |
Lift valve | 76141 | |
Socket head cap screw | 50104-14-C | |
Regular lock washer | 50904-C | |
Manifold | 76101 | |
Check valve | 74731 | |
Ext. pipe countersunk hex plug | 53000-16-C | |
Ext. pipe countersunk hex plug | 53000-2 | |
Ext. pipe / 37° connector | 56501-4-4-S | |
Ext. pipe / 37° connector | 56501-8-8-S | |
Lift/Lower instruction plate | 76149 | |
U-type drive screw | 53301-6-4 | |
Clamp/unclamp instruction plate | 76143 | |
U-type drive screw | 53301-10-6 | |
Close nipple | 53916-B | |
Swivel joint | 19159 | |
SSW40 PNEUMATIC SYSTEM INSTALLATION | ||
Item | Description | Part no. |
1 | Lift cylinder hose assembly | 58572P080051 |
2 | Right motor hose assembly | 75924 |
4* | 90° Elbow ext. pipe / 37° | 56506-16-12S |
3 | Left motor hose assembly | 75925 |
4* | 90° Elbow ext. pipe / 37° | 56506-16-12S |
5 | Right T-fitting | 74253 |
6* | 45° Elbow, ext. pipe / 37° | 56502-12-12S |
7 | Left T-fitting | 75920 |
8 | Inboard left motor hose assembly | 76261-1 |
9 | Outboard left motor hose assembly | 76261-2 |
10 | 90° Elbow ext. pipe/int pipe | 76250 |
11 | 105° Elbow ext. pipe / 37° | 76252 |
12 | 90° Elbow ext. pipe / 37° | 76251 |
13 | Throttle valve hose assembly | 76160 |
14 | Quick exhaust valve hose assembly | 76161 |
15 | Quick exhaust valve hose assembly | 990141-395 |
SSW40 CONTROL VALVES | ||
Seal kit, motor valve | 30013001 | |
Seal kit, lift or clamp valve | 75803 | |
Item Description | ||
1 | Gasket | |
2 | End guide | |
3 | Valve body lift or clamp valve (requires gasket) | |
4 | Valve body motor valve (no gasket) | |
5 | Spool | |
6 | Seal ring (6 in kit) | |
7 | Spacer (1 in kit) | |
SSW40 AIR MOTOR ASSEMBLY | ||
Item | Description | Part no. |
1 | Output shaft | 74555-1 |
2 | Seal | 74555-2 |
3 | Ext. retaining ring | 74555-3 |
4 | 19 Teeth gear pinion | 74555-4 |
5 | Ball bearing | 14694-37 |
6 | Hex head cap screw | 50006-8-C5 |
7 | Regular lock washer | 50906-C |
8 | Motor to gear housing gasket | 74555-8 |
9 | Liner | 14694-35 |
10 | Dowel | 76187-1 |
11 | Rotor blade | 14694-39 |
12 | Rotor | 76187-2 |
13 | Bearing spacer | 14694-40 |
14 | Motor housing cover | 76187-3 |
15 | Hex head cap screw | 50005-18-C5 |
16 | Bearing clamp screw | 14694-32 |
17 | Bearing clamp nut | 14694-34 |
18 | Hex head cap screw | 50005-9-C5 |
19 | Regular lock washer | 50905-C |
20 | Cover gasket | 74555-20 |
21 | Upper end plate | 14694-33 |
22 | Motor housing | 76187-4 |
23 | Lower end plate | 14694-41 |
24 | Ball bearing | 74555-24 |
25 | Gear housing | 74555-25 |
26 | 50 Teeth gear | 74555-26 |
27 | Housing to cover gasket | 74555-27 |
28 | Gear housing cover | 74555-28 |
29 | Hex head cap screw | 50005-7-C8 |
30 | Ball bearing | 74555-30 |
31 | Hex head cap screw | 50005-20-C8 |
32 | Rotor .001 shim | 14694-42 |
33 | Rotor .002 shim | 14694-43 |
34 | Rotor .003 shim | 14694-44 |
35 | Rotor .005 shim | 14694-45 |
SSW40 LIFT CYLINDER | ||
Item | Description | Part no |
1 | Shackle with pin | 944515-2 |
2 | Piston rod | 75341-1 |
3 | Tie rod nut | 75341-2 |
4 | Retainer | 75341-3 |
5 | Rod end head | 75341-4 |
6 | Tie rod | 75341-5 |
7 | Gland | 75341-6 |
8 | Gland wiper | 75341-7 |
9 | Gland back-up washer | 75341-8 |
10 | Gland lipseal | 75341-9 |
11 | Gland O-ring | 75341-10 |
12 | Piston lipseal | 75341-11 |
** | ||
13 | Piston back-up washer | 75341-12 |
14 | Piston | 75341-13 |
15 | Body | 75341-14 |
16 | Body O-ring | 75341-15 |
17 | Cap end head | 75341-16 |
18 | Drilled shank bolt | 76925 |
19 | Hex-slotted nut | 50512-C |
20 | Cotter pin | 51402-10 |