| NOV VARCO TOP DRIVE SYSTEM |
| VARCO TDS TDS-3, TDS-3S, TDS-4, TDS-4S, TDS-5, TDS-7S |
| VARCO TDS TDS-8SA, TDS-9SA, TDS-10SA, TDS-11SA, TDS10SH, TDS11SH |
| VARCO TDS TDS-1, TDS-4H, TDS-4S, TDS-6S,IDS-350PE |
| VARCO TDS TDS-3, TDS-3S, TDS-4, TDS-4S, TDS-5, TDS-7S Spare parts |
| VARCO TDS TDS-8SA, TDS-9SA, TDS-10SA, TDS-11SA, TDS10SH, TDS11SH Spare parts |
| VARCO TDS TDS-1, TDS-4H, TDS-4S, TDS-6S,IDS-350PE Spare parts |
| ELEMENT FILTER OIL HYDRAULIC VARCO (OILWELL EQUIPMENT) |
| GASKET VARCO 7455527 HOUSING TO COVER FOR SPINNER WRENCH SSW-40,PART NO. 74555-27 (OIL WELL EQUIPMENT) |
| COVER HOUSING GEAR VARCO,PART NO. 74555-28 (OIL WELL EQUIPMENT) |
| SHIM ROTOR 0.001 VARCO,PART NO. 14694-42 (OIL WELL EQUIPMENT) |
| SHIM ROTOR 0.001 VARCO 14694-42,PART NO. 14694-42 (OIL WELLEQUIPMENT) |
| BEARING VARCO 7455524 FOR SPINNING WRENCH SSW 40,PART NO. 74555-24 (OIL WELL EQUIPMENT) |
| (16401-6) VARCO/BJ TONG DIE, 1/2″ X 1.1/4″ X 5″(OILWELL EQUIPMENT) |
| (16402-2)VARCO/BJ PYRAMID TONG DIE, 1/2″ X 1.1/4″ X 5.7/8″(OILWELL EQUIPMENT) |
| RING, LOCK, BJ, VARCO |
| VARCO BJ CAP rig123.net’ target=’_blank’>SCREW LIST 13 SL NO.2/24 |
| VARCO BJ HOSE ASSLY LIST 13 SL NO.2/24 |
| VARCO MAIN AIR LINE ASSY LIST 13 SL NO. 2/24 |
| “VALVE, DIRECTIONAL CONTROL SOLENOID LOWER 3-POSITION 15 GPM UL FOR VARCO TOP DRIVE RBS” |
| WASHER LOCK REGULAR VARCO (OILWELL EQUIPMENT) |
| CAPSCREW HEX HEAD DRILLING TDS VARCO (OILWELL EQUIPMENT) |
| CAPSCREW HEX HEAD DRILLING TDS VARCO (OILWELL EQUIPMENT) |
| STOP BAIL TDS VARCO (OILWELL EQUIPMENT) |
| GAUGE 3000 PSI FOR TW60/HP41 VARCO (OILWELL EQUIPMENT) |
| BUSHING ALIGNMENT CYLINDER VARCO (OILWELL EQUIPMENT) |
| CAP TRUNNION VARCO (OILWELL EQUIPMENT) |
| KIT 9-3/4 IN HINGE PIN SDML/SDXL VARCO (OILWELL EQUIPMENT) |
| VARCO 6-3/4”-8-1/4””DCS-R DRILL COL REF. #113279 |
| VARCO 4-1/2”-6”DCS-R DRILL COL REF. #113279 |
| VARCO 4-1/2”-6”DCS-R DRILL COL REF. #113279 |
| SCREW, DRIVE.114 X 5/16″, VARCO BJ P/N 53301-4-5 |
| WASHPIPE 4 INCH BORE 7500 POUNDS PER SQUARE INCH VARCO (OILWELL EQUIPMENT) |
| PACKING KIT WASHPIPE 4 STD VARCO (OILWELL EQUIPMENT) |
| TUBE ASSY, VARCO BJ |
| TUBE ASSY, VARCO BJ |
| TACHOMETER, 250 RPM, VARCO 96218-3 P.NO.PR1003A-19 (OILWELLEQUIPMENT) |
| TRIGGER RETAINERACT PLUNGER VARCO 50004054 (OILWELL EQUIPMENT) |
| PIN POSITION BUSHING BODY BX4-50/75 VARCO 50000660 (OILWELL EQUIPMENT) |
| FITTING CHECK VALVE VARCO 59000243-3-8 (OILWELL EQUIPMENT) |
| RING RETAINING EXTERNAL VARCO 59000213-10-C (OILWELL EQUIPMENT) |
| CONNECTOR VARCO 5652984S (OILWELL EQUIPMENT) |
| RING BACKUP VARCO 51301-113 (OILWELL EQUIPMENT) |
| RING BACKUP VARCO 51301-110 (OILWELL EQUIPMENT) |
| SPRING COMPRESSION VARCO 980252 (OILWELL EQUIPMENT) |
| VALVE CHECK CARTRIDGE FOR TDS9S VARCO 107029175N (OILWELL EQUIPMENT) |
| PIN BRACKET F/BX4-50/75 VARCO 50000658 (OILWELL EQUIPMENT) |
| LOCKPLATE HING PIN DOOR BX4/BXS VARCO 50000217 (OILWELL EQUIPMENT) |
| FITTING HOSE HYDRAULIC STEEL 1/4 IN VARCO 50005337 (OILWELL EQUIPMENT) |
| ELEMENT FILTER BX/PS VARCO 979796-25-S (OILWELL EQUIPMENT) |
| DOOR ASSEMBLY CYLINDER BX4-50/75 VARCO 50000667 (OILWELL EQUIPMENT) |
| BRACKET LATCH WITH BUSHIMG REPLACES 203226 VARCO 203226-1 (OILWELL EQUIPMENT) |
| SPRING VARCO 980474 (OILWELL EQUIPMENT) |
| BUSHING 3/4 IN VARCO 203254 (OILWELL EQUIPMENT) |
| BRACKET LEVER PIN VARCO 203246 (OILWELL EQUIPMENT) |
| DISC LEVER PIN VARCO 203245 (OILWELL EQUIPMENT) |
| PIN DOOR LEVER VARCO 203244 (OILWELL EQUIPMENT) |
| SHAFT LATCH LOCK VARCO 203232 (OILWELL EQUIPMENT) |
| LATCH LOCK LAVER VARCO 203231-2 (OILWELL EQUIPMENT) |
| DISC VARCO 203227 (OILWELL EQUIPMENT) |
| BRACKET LH DOOR WITH BUSHING REPLACES 203225 VARCO 203225-1 (OILWELL EQUIPMENT) |
| BRACKET RH DOOR W/ BUSHING REPLACES 203 VARCO 203224-1 (OILWELL EQUIPMENT) |
| TEE SWIVEL INT 37/37/37 VARCO 56525-4-4-S (OILWELL EQUIPMENT) |
| ADAPTER STRAIGHT VARCO 50003981 (OILWELL EQUIPMENT) |
| POSITION PIN BUSHING DOOR BX4-50/75 VARCO 50000660-1 (OILWELL EQUIPMENT) |
| LATCH ASSEMBLY CYLINDER BX4-50/75 VARCO 50000668 (OILWELL EQUIPMENT) |
| CONTROL SHAFT LATCH LOCK VARCO 203230 (OILWELL EQUIPMENT) |
| TUBE ASSY, VARCO BJ P/N 203275 |
| NUT, LOCK, F/ IRON ROUGHNECK, DWG NO. – 460524-PIRC XX01/01, VARCO P/N 56547-6-S |
| PLUG ORIFICE .125 IN NPT 091 IN DIA VARCO (OILWELL EQUIPMENT) |
| BUSHING.SLEEVE 1.38 X .75 FIBER GLIDE VARCO (OILWELL EQUIPMENT). |
| BUSHING VARCO (OILWELL EQUIPMENT) |
| CYLINDER ASSEMBLY HYDRAULIC LINK TILT PH-100 VARCO (OILWELL EQUIPMENT) |
| WASHER LOCK REGULAR VARCO (OILWELL EQUIPMENT) |
| CAPSCREW SOCKET HEAD VARCO (OILWELL EQUIPMENT) |
| ASSEMBLY HYDRAULIC DRIVE / SHOTPIN ROT-LINK-ADAPTER VARCO (OILWELL EQUIPMENT) |
| SEAL KIT 870182 VARCO (OILWELL EQUIPMENT) |
| PLUG ORIFICE .125 IN NPT 142 IN DIA VARCO (OILWELL EQUIPMENT) |
| SEAL KIT CYLINDER COUNTER BALANCE 5 IN VARCO (OILWELL EQUIPMENT) |
| SEAL KIT BODY FOR 118312 CYLINDER VARCO (OILWELL EQUIPMENT) |
| SEAL KIT ROD BRONZE GLAND VARCO (OILWELL EQUIPMENT) |
| SEAL ROD & GLAND VARCO (OILWELL EQUIPMENT) |
| SEAL LIP PISTON VARCO DRILLING SYSTEMS (OILWELL EQUIPMENT) |
| TEST KIT BX ELEVATOR+PS VARCO(OILWELL EQUIPMENT) |
| 1 NUM WASHPIPE, ASSY TDS VARCO |
| OILFIELD EQUIPMENT – HOSE ASSEMBLY VARCO 30177009-050 |
| OILFIELD EQUIPMENT – HOSE ASSEMBLY VARCO 30177009-031 |
| EXTRACTOR MIST VARCO (OILWELL EQUIPMENT) |
| CAPSCREW HEX HEAD VARCO (OILWELL EQUIPMENT) |
| WASHER LOCK FOR TOP DRIVE VARCO (OILWELL EQUIPMENT) |
| CLAMP HOSE 2.5-12.25 SCD VARCO (OILWELL EQUIPMENT) |
| NUT HEX SELF LOCKING VARCO (OILWELL EQUIPMENT) |
| CAPSCREW HEX HEAD DRILLED VARCO (OILWELL EQUIPMENT) |
| WIRE LOCK .032 DIA UK 360 FT US 364 FT PE VARCO (OILWELL EQUIPMENT) |
| NUT HEX STD UNC -2B VARCO (OILWELL EQUIPMENT) |
| NUT, LOCK, F/ IRON ROUGHNECK, DWG NO. – 460524-PIRC XX01/01, VARCO P/N 56547-6-S |
| MOTOR OIL CIRC 4HP/3KW 60HZ EEXDE TDS8S VARCO PART NO.30174376-460-60 (OILWELL EQUIPMENT) |
| MOTOR 3KW 4 HP VARCO PART NO. 97886-4 (OILWELL EQUIPMENT) |
| ELEMENT FILTER OIL HYDRAULIC VARCO (OILWELL EQUIPMENT) |
| FILTER & O-RING KIT GEAR OIL VARCO (OILWELL EQUIPMENT) |
| ELEMENT FILTER 25 MICRON SCHROEDER VARCO (OILWELL EQUIPMENT) |
| OILFIELD EQUIPMENT – KIT CIRCULAR BUTTON 958 CMSXL VARCO 2 |
| SIGN, WARNING, MOVING PARTS, USED ON BX #3, #4, #5., VARCO P/N 203263 |
| RING, LOCK, VARCO BJ P/N 979485-13 |
| TUBE ASSY, VARCO BJ P/N 203275 |
| VARCO BJ ELBOW, O-RING BOSS 37, P/N 56519-8-6-S |
| VARCO BJ CONNECTOR, O-RING BOSS 37″, P/N 56529-8-6-S |
| SWITCH PRESSURE MEDIUM PRESSURE EEX D TDS-8S / LUBE OIL VARCO (P/N 30151890-B32D) |
| MOTOR AIR CHICAGO PNEUMATIC SSW40 VARCO, PART NO. 74628 (OIL |
| ACTUATOR ASSEMBLY IBOP VARCO 118510 |
| CLAMP SAFETY 9-1/4 IN – 10 -1/2 IN MP – S- VARCO BJ 33015 |
| CLAMP SAFETY 2-7/8 IN -4 1/8 IN MP S VARCO BJ 33030 |
| POTENTIONER RTD 4 X IS INPUT VARCO 140698-4 (OILWELLrig123.net’ target=’_blank’>DRILLING rig123.net’ target=’_blank’>RIGSPARE) |
| BUTTON CIRCULAR EA 7 IN – 7-5/8 IN VARCO 2619 (OILWELL DRILLING RIG SPARE) |
| DIE LOWER SET ST80 VARCO 30172029 (OILWELL DRILLING RIG SPARE) |
| DIE UPPER ST80 VARCO 30174222 (OILWELL DRILLING RIG SPARE) |
| PACKING KIT WASHPIPE 4 STD VARCO 30123440-PK (OILWELL DRILLING RIG SPARE) |
| WASHPIPE 4 INCH BORE 7500 POUNDS PER SQUARE INCH VARCO 30123438 (OILWELL DRILLING RIG SPARE) |
| NUT SCREW KIT 6 PIECE VARCO 3737 (OILWELL DRILLING RIG SPARE) |
| SCREW INST RETAIN WITH WASHER VARCO 3745 (OILWELL DRILLING RIG SPARE) |
| KIT 9-3/4 IN HINGE PIN SDML/SDXL VARCO 2192 (OILWELL DRILLING RIG SPARE) |
| PIN HANDLE W/WASHER & COTTER F/SLIP VARCO 3769 (OILWELL DRILLING RIG SPARE) |
| HANDLE SLIP LEFT F/SDXL ROTARY SLIP VARCO 3768 (OILWELL DRILLING RIG SPARE) |
| HANDLE SLIP RIGHT F/SDXL RTRY SLIP VARCO 3767 (OILWELL DRILLING RIG SPARE) |
| OIL FIELD EQUIPMENT-VARCO BJ TONG DIE DIAMOND (P/N.16401-6) |
| BOLT RETAINER JAW .5X6.5 VARCO 30122112 (OILWELL EQUIPMENT) |
| CAPSCREW SOCKET HEAD UNC VARCO 50108-10-C (OILWELL EQUIPMENT) |
| ENCODER DIGITAL LOW TEMPERATURE VARCO -30122725-HE (OILWELL EQUIPMENT) |
| MODULE, I/O, REMOTE, INPUT/OUTPUT, 4PT ANALOG, VARCO P/N 122627-45 |
| 1 NUM COUPLING, ASSEMBLY FOR LUBE OIL CIRCULATING UNIT ON VARCO TOP DRIVE UNIT TDS-4S, VARCO |
| 4 NUM MAGNET, ASSEMBLY FOR MECH. FILTER, 25 MICRON, VARCO |
| 10 NUM KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: THE FOLLOWING ITEMS 2-EA 30160382 DIE LOWER DOVETAIL 5-EA 50108-14 |
| FILTER, ASSEMBLY, COMPLETE, WITH 60 MICRON ELEMENT DIRT ALARM AND HYDRAULIC FILTER BYPASS FOR VARCO TOP DRIVE, VARCO |
| 1 NUM STRAINER, 30 MICRON, VARCO P/N 30176000 |
| GAUGE, PRESSURE, FOR LUBE OIL CIRCULATING UNIT ON VARCO TOP DRIVE UNIT TDS-4S, VARCO P/N 115217-1F2 |
| 5 NUM KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ C/O: FOLLOWING ITEMS 2 EA. 30160380 DIE UPPER DOVETAIL, 5 EA. 50108-8-CA |
| ASSEMBLY IBOP UPPER H2S ABSM CERT T VARCO 30177468- ABSM (OILWELL EQUIPMENT) |
| OILWELL SUPPLIES:COUPLING, ASSEMBLY FOR LUBE OIL CIRCULATING UNIT ON VARCO TOP DRIVE UNIT TDS 4S, VARCO |
| OILWELL SUPPLIES:(QTY : 2 NOS) MAGNET, ASSEMBLY FOR MECH. FILTER, 25 MICRON, VARCO |
| SHIELD, BEARING – VARCO |
| 3 NUM KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: THE FOLLOWING ITEMS 2-EA 30160382 DIE LOWER DOVETAIL 5-EA 50108-14- |
| OILFIELD EQUIPMENT – ELEMENT FILTER REPLACEMENT VARCO BJ 119021ELE |
| OILFIELD EQUIPMENT – ELEMENT FILTER REPLACEMENT VARCO BJ 119021ELE |
| OILFIELD EQUIPMENT – ELEMENT FILTER GEAR OIL VARCO DRILLINGSYSTEMS 94085ELE |
| OILFIELD EQUIPMENT – O – RING 51300232B VARCO |
| OILFIELD EQUIPMENT – O – RING 51300237B VARCO |
| OILFIELD EQUIPMENT – O – RING VARCO 51300-219-B |
| OILFIELD EQUIPMENT – ACCUMULATOR HYDRO PNEU 2 IN TDS9S VARCO(1105641) |
| 73109 WRENCH SPINNING PNEUMATIC MODEL SWW 40 RIGHT AND LEFTHAND ROTATION 3-1/2 IN TO 9-1/2 IN VARCO 73109(PO 04-0007305 |
| OILWELL EQUIPMENT 1 NUM SLIP, DRILL COLLAR 5-1/2-7 IN VARCO |
| SEGMENT, SLIP RIGHT END VARCO CMS-XL (MEXICO) |
| STOP BAIL TDS VARCO (OILWELL EQUIPMENT) |
| 2573 VARCO 4″-4-7/8″DCS-S DRILL COLLAR (OILWELL DRILLING RIG SPARES) |
| 2501 VARCO 5-1/2″-7″DCS-L DRILL COLLAR (OILWELL DRILLING RIG SPARES) |
| 2503 VARCO 6-3/4″-8-1/4″DCS-L DRILL COLLAR (OILWELL DRILLING RIG SPARES) |
| 1 NUM TEE, HOSE, RIGHT, VARCO FOR SSW 40 PNEUMATIC WRENCH. |
| 1 NUM JAW, LUG, ASSEMBLY, 3-1/2 IN -8-1/4 IN FOR MANUAL TONG TYPE HT65, VARCO |
| 61139 SLING ASSY LIFTING F/MSTR / VARCO 1021 (OILFIELD EQUIPMENT) |
| VARCO BJ CONNECTOR O RING BOSS 37 (56529-6-6-S) ( OILWELLEQUIPMENT SPARES) |
| VARCO BJ ELBOW , O-RING BOSS (56519-6-6-S) ( OILWELL EQUIPMENT SPARES) |
| VARCO BJ WASHER ,FLAT (50808-R-C) (OILWELL EQUIPMENTS SPARES) |
| VARCO BJ NIPPLE ,PIPE (56703-8-6-S) ( OILWELL EQUIPMENT SPARES) |
| VARCO BJ ELBOW , O-RING BOSS (56519-6-6-S) ( OILWELL EQUIPMENT SPARES) |
| 12 NUM NIPPLE, GREASE, DRIVE TYPE STRAIGHT, VARCO |
| DIE TONG 1/2 IN X 1-1/4 IN X 5-7/8 IN VARCO,PART NO.16402-6 (OIL WELL EQUIPMENT) |
| RING, LOCK, BJ, VARCO P/N 979485-15 |
| OIL WELL SUPPLIES: VARCO BJ CONNECTOR,O’RING BOSS 37′ 56529-6-6-S |
| OIL WELL SUPPLIES: VARCO BJ ELBOW,Q’RING BOSS 37′ 56519-8-6-S |
| OIL WELL SUPPLIES: VARCO BJ PILOT TO OPEN CHECK VALVE WITH BODY BCV 93547-2B75N |
| OIL WELL SUPPLIES: VARCO BJ REDUCER, INT 37’/37′ 56517-6-4-S |
| OIL WELL SUPPLIES: VARCO BJ PRESSURE REDUCING CATRIDGE 94817-3AN |
| OIL WELL SUPPLIES: VARCO BJ CONNECTOR, O’RING BOSS 37′ 56529-6-6-S |
| OIL WELL SUPPLIES: VARCO BJ ELBOW, O-RING BOSS 56519-6-6-S |
| OIL WELL SUPPLIES: VARCO BJ CARTRIDGE 94518-23HN |
| OIL WELL SUPPLIES: VARCO BJ ELBOW, O-RING BOSS 56519-6-6-S |
| OIL WELL SUPPLIES: VARCO BJ ELBOW,O’RING BOSS 37′ 56519-8-6-S |
| OIL WELL SUPPLIES: VARCO BJ ELBOW, O-RING BOSS 56519-6-6-S |
| OIL WELL SUPPLIES: VARCO BJ LOCK NUT BULCK HEAD 56547-16-S |
| POTENTIONER RTD 4 X IS INPUT VARCO (OILWELL EQUIPMENT) |
| SCREW, DRIVE.114 X 5/16″, VARCO BJ P/N 53301-4-5 |
| OIL FIELD EQUIPMENT-POWER SUPPLY LOW TEMP SAFE AREA 10 AMP VARCO (P/N.30173797-10) |
| RING, LOCK, VARCO BJ |
| POTENTIONER RTD 4 X IS INPUT VARCO (P/N 140698-4) (OILWELL EQUIPMENT) |
| VALVE SOLENOID PROPORTIONAL VARCO (P/N 130358-RV1-BT) (OILWELL EQUIPMENT) |
| SUB SAVER 7-5/8 REG RH X 5-1/2 FH RH C VARCO 91786-605 (OILWELL DRILLING RIG SPARES) |
| OILWELL SUPPLIES : (QTY : 312 NOS) BUTTON, CIRCULAR, 20 (SET/312), VARCO BJ P/N 2631-312 |
| OILWELL SUPPLIES : (QTY : 12 NOS) KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: THE FOLLOWING ITEMS 2-EA 30160382 DIE |
| 2 NUM KIT, DIE HOLDER FOR ST80-H VARCO SPIN TORQ |
| PROTECTOR, GAUGE 1502 MODEL NO E17-152W, 2″ PISTON TYPE, 15 000 PSI, MARTIN DECKER TOTCO P/N E17-152, VARCO STK # E17-1 |
| 2 NUM NUT, HEX, 7/8″ UNF-14 TPI, TOP DRIVE, VARCO P/N 55214-C |
| 16 NUM PIN, COTTER, 3/16″ X 1-1/2″ LONG, 304 STAINLESS STEEL, VARCO P/N 51403-12-S |
| OILFIELD EQUIPMENT – INSERT KIT 500 TON VARCO 263640B80 |
| OILFIELD EQUIPMENT – CRANK ASSEMBLY EXTERNAL VARCO (P/N:30173893) |
| LINK, VARCO P/N 84638 |
| OILFIELD EQUIPMENT – WASHPIPE 4 INCH BORE 7500 POUNDS PER SQUARE INCH VARCO 30123438 |
| 1 NUM O-RING, FOR VARCO 750TDS TOP DRIVE |
| MOTOR AIR CHICAGO PNEUMATIC SSW40 VARCO, PART NO. 74628 (OILWELL EQUIPMENT) |
| CAPSCREW HEX HEAD DRILLED VARCO,PART NO. 50004-9-C5D(OIL WELL EQUIPMENT) |
| WASHER LOCK REGULAR 1/4 IN CAD PLATED VARCO,PART NO. 50904-C(OIL WELL EQUIPMENT) |
| VALVE MUFFLER QUICK RELEASE VARCO,PART NO. 74238-2 (OIL WELLEQUIPMENT) |
| SEAL F/ SPINNING WRENCH SSW 40 VARCO,PART NO. 74555-2 (OIL WELL EQUIPMENT) |
| BEARING VARCO 1469437 AIR MOTOR FOR VARCO SPINNING WRENCH,PART NO.14694-37 (OIL WELL EQUIPMENT) |
| GASKET F/ SPINNING WRENCH SSW-40 VARCO,PART NO. 74555-8 (OILWELL EQUIPMENT) |
| LINER VARCO ITEM 58,PART NO. 14694-35 (OIL WELL EQUIPMENT) |
| ROTOR VARCO 761872 FOR SPINNING WRENCH SSW 40,PART NO. 76187-2 (OIL WELL EQUIPMENT) |
| BLADE VARCO 1469439 ROTOR AIR MOTOR FOR VARCO SSW 10AND 40,PART NO. 14694-39 (OIL WELL EQUIPMENT) |
| GASKET COVER FOR SPINNING WRENCH SSW-40 VARCO,PART NO. 74555-20 (OIL WELL EQUIPMENT) |
| PLATE UPPER SSW-40 PIPE SPINNER VARCO,PART NO. 14694-33 (OIL WELL EQUIPMENT) |
| PLATE LOWER SSW-40 PIPE SPINNER VARCO,PART NO. 14694-41 (OILWELL EQUIPMENT) |
| NUT SCREW KIT 6 PIECE VARCO 3737 (OILWELL DRILLING RIG SPARE |
| GAUGE PRESSURE VARCO (OILWELL EQUIPMENT) |
| GAUGE PRESSURE VARCO (OILWELL EQUIPMENT) |
| CONNECTOR O-RING BOSS/INT PI VARCO (OILWELL EQUIPMENT) |
| RTD W/THERMOWELL PT100 2-1/2 LG VARCO 30156722-2.5 (SHIP SPARES) |
| PIN HINGE W/COTTER PIN F/DRL CLR VARCO 2525 (SHIP SPARES) |
| OIL WELL SUPPLIES: (QTY: 1 NOS) PIN LOCK FOR IRON ROUGHNECK MODEL ST-80 NATIONAL OILWELL VARCO P/N 30171613 |
| OIL WELL SUPPLIES: KEY DIE UPPER FOR ST80-H VARCO SPIN TORQ |
| OIL WELL SUPPLIES: KIT DIE HOLDER FOR ST80-H VARCO SPIN TORQ |
| OIL WELL SUPPLIES: (QTY: 4 NOS) CONNECTOR FORSPINNING WRENCH VARCO P/N 56529-12-8-S |
| ELEVATOR, BOTTLENECK, MODEL:MGG, 250TON F/3 1/2″ IF DRILL PIPE, VARCO 35005Y120-S NO. 220690,220689-E35005-120-SPARE PAR |
| WSHR NORD LK/VARCO 3018357M20C (OILWELL EQUIPMENT) |
| ELEVATOR BJ VARCO 35005Y120(PO 03-0007276)(1 UNT) |
| VARCO BJ O RING (51300-240-B) (OILWELL EQUIPMENTS SPARES) |
| VARCO BJ WASHER ,FLAT (50808-R-C) (OILWELL EQUIPMENTS SPARES) |
| VARCO BJ WASHER ,FLAT (50808-R-C) (OILWELL EQUIPMENTS SPARES) |
| VARCO BJ CARTRIDGE (94518-23HN) (OILWELL EQUIPMENTS SPARES) |
| OILFIELD EQUIPMENT – KIT, SEAL, FOR MOTOR ALIGNMENT CYLINDER , VARCO TOPDRIVE APPLICATION |
| MOTOR HYDRAULIC MODIFIED LOW SPEED HIGH TORQUE VARCO 30158011 (OILWELL EQUIPMENT) (OILWELL EQUIPMENT) (OILWELL EQUIPMENT |
| SEAL PISTON SAME AS 110061 VARCO 110061-326 (OILWELL EQUIPMENT) (OILWELL EQUIPMENT) (OILWELL EQUIPMENT) |
| SEAL ROD 1-1/2 IN BORE VARCO 110056 (OILWELL EQUIPMENT) (OILWELL EQUIPMENT) (OILWELL EQUIPMENT) |
| O-RING VARCO 51300-226-B (OILWELL EQUIPMENT) (OILWELL EQUIPMENT) (OILWELL EQUIPMENT) |
| SLEEVE SHOT PIN PH-100 VARCO 30151951 (OILWELL EQUIPMENT) (OILWELL EQUIPMENT) (OILWELL EQUIPMENT) |
| TRANSDUCER MEASURING PT100 TEMP RTD VARCO 30176848-7 (OILWELL EQUIPMENT) |
| ELEMENT 20 MICRO VARCO 30156633 1 (OILWELL EQUIPMENT) |
| ELEVATOR SINGLE JOINT 9-5/8” IN 5 TON VARCO 70502Y141 (OILWELL EQUIPMENT) |
| ELEVATOR SINGLE JOINT 7 IN BJ VARCO 31239Y136 (OILWELL EQUIPMENT) |
| SEAL KIT VARCO BJ 200933-2 (OILWELL EQUIPMENT) |
| 1 NUM KIT, REPAIR FOR VARCO TOP DRIV E LIFT CYL KIT, REPAIR FOR VAR |
| SLIP ASSEMBLY, ROTARY MEDIUM, 4-1/2″ X 3-1/2″, MODEL SDML COMPLETE W/INSERTS VARCO-15563-SPARE rig123.net’ target=’_blank’>PARTS FOR OIL WELL EQUIPM |
| OILFIELD EQUIPMENT – SLEEVE, CRANK, FOR LOWER IBOP, VARCO IDS-1 TOP DRIVE DRILLING UNIT #388 SER#I DSG14A016 |
| OILFIELD EQUIPMENT – WRENCH F/NUT F/SAFETY CLAMP VARCO 3320 |
| OILFIELD EQUIPMENT – NUT MAKE UP F/MP SAFETY CLAMP VARCO 3303 |
| SEAL, BEARING COVER, FOR TDS-3, VARCO |
| OILFIELD EQUIPMENT – WRENCH F/NUT F/SAFETY CLAMP VARCO 3320 |
| OILFIELD EQUIPMENT – NUT MAKE UP F/MP SAFETY CLAMP VARCO 3303 |
| SEAL, BEARING COVER, FOR TDS-3, VARCO |
| VARCO BJ 7 CONDUCTOR ELECTRIC CABLE (56625-1.5-07) (QTY 10FT) (OILWELL EQUIPMENTS SPARES) |
| INSERT DIES DP 5″, P/N:2167, MFR VARCO, 54EA/SET NOTE 1 SET =P/N 2167-54***54 DIES/SET |
| INSERT DIES, DP4-1/2″ – 3-1/2″, P/N: 2163, MFR VARCO, 54EA/SET ***NOTE 1 SET = P/N 2163-54***54 DIES / SET |
| 2014R-0479: 2570-SEGMENT: INTERMEDIATE, VARCO TYPE DCS-S DRILL (OILWELL DRILLING RIG SPARES) |
| POTENTIONER RTD 4X IS INPUT VARCO (OILWELL EQUIPMENT) |
| RING, EXTERNAL RETAINING FOR VARCO MOUSE |
| PARTNO V15516 VARCO SDXL 5″ ROTARY HAND SLIP W/INSERTS, MAKE: NOV(PO IC-0008992) |
| FLANGE O-RING INT PIPE 4 BOLT VARCO (OILWELL EQUIPMENT) |
| FLANGE O-RING INT VARCO (OILWELL EQUIPMENT) |
| ELBOW O-RING BOSS/37 DEGREE VARCO (OILWELL EQUIPMENT) |
| ELBOW O-RING BOSS/37 DEGREE VARCO (OILWELL EQUIPMENT) |
| ELBOW 90 INT 37 VARCO (OILWELL EQUIPMENT) |
| O-RING 51300225B VARCO (OILWELL EQUIPMENT) |
| O-RING 51300228B VARCO (OILWELL EQUIPMENT) |
| O-RING 51300222B VARCO (OILWELL EQUIPMENT) |
| O-RING 51300222B VARCO (OILWELL EQUIPMENT) |
| O-RING 51300232B VARCO (OILWELL EQUIPMENT) |
| O-RING 51300237B VARCO (OILWELL EQUIPMENT) |
| FITTING TEST SAE VARCO DRILLING SYSTEMS (OILWELL EQUIPMENT) |
| PIN, COTTER 1/8 IN X 3/4 IN SS VARCO FINGERBOARD DWG NO. 93067 (USA) |
| CAPSCREW HEX HEAD VARCO 50006-10-CS( 16 NUM) |
| OILWELL SUPPLIES: (QTY: 3 NOS) KIT DIE UPPER FOR VARCO ST80-H SPIN TORQ C/O FOLLOWING ITEMS 2 EA 30160380 DIE UPPER DOVE |
| OILWELL SUPPLIES: (QTY: 3 NOS) KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O THE FOLLOWING ITEMS 2 EA 30160382 DIE LOWER |
| SLIPS ROTARY BUTTON TYPE CMS/XL 9-5/8 VARCO 5307 ITEM NO.1146623 LOT/SR.NO 10931425-1 (OILWELL EQUIPMENT) |
| V15519 VARCO SDXL 5-1/2″ Rotary Slip complete with Inserts (was 3717) (OILWELL DRILLING RIG SPARES) |
| ELEMENT 20 MICRO VARCO 30156633 1 (OILWELL EQUIPMENT) |
| 30176848-7 TRANSDUCER MEASURING PT100 TEMP RTD VARCO (OILWELL EQUIPMENT) |
| 30160380-500 DIE GRIP UPPER VARCO (OILWELL EQUIPMENT) |
| 16401-2 DIE TONG PYRAMID1/2 IN X 1-1/4 IN X 5 IN VARCO (OILWELL EQUIPMENT) |
| VARCO PS-16 AIR OP. POWER SLIP |
| OILWELL SUPPLIES: (QTY: 3 NOS) KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: THE FOLLOWING ITEMS 2-EA 30160382 DIE LOWE |
| OILWELL SUPPLIES: (QTY: 2 NOS) KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ C/O: FOLLOWING ITEMS 2 EA. 30160380 DIE UPPER D |
| PIN, COTTER 1/8 IN X 3/4 IN SS VARCO FINGERBOARD DWG NO. 93067 |
| VARCO BJ CARTRIDGE (94518-23HN) (OILWELL EQUIPMENTS SPARES) |
| VARCO BJ CARTRIDGE (94518-23HN) (OILWELL EQUIPMENTS SPARES) |
| P.NO. PR1003A-19 TACHOMETER, 250 RPM, VARCO 96218-3 (OILWELLEQUIPMENT SPARES) |
| MOTOR HYDRAULIC PARKER ST-120 P VARCO (OILWELL EQUIPMENT) |
| MOTOR HYDRAULIC PARKER ST-120 P VARCO (OILWELL EQUIPMENT) |
| LOCKWASHER, TAB, 0.40, VARCO |
| SEGMENT INTERMEDIATE VARCO 2556 (OILWELL DRILLING RIG SPARE) |
| BUTTON F/7 – 5-1/2 TP DCS SLIPS VARCO 2513 (OILWELL DRILLING RIG SPARE) |
| PIN COTTER VARCO 51403-12 (OILWELL DRILLING RIG SPARE) |
| PIN COTTER VARCO 51425-8 (OILWELL DRILLING RIG SPARE) |
| ROLLER, VARCO MOUSEHOLE SPIDER ASSY |
| (USED) X102243300 MOTOR,DOWNHOLE BHA 2.875 INCH NATIONAL OILWELL VARCO USA,OSS ASSET UPLOAD,AMI PURPOSE ONLY (FOR OILFIE |
| (USED) X102243300 MOTOR,DOWNHOLE BHA 2.875 INCH NATIONAL OILWELL VARCO USA,OSS ASSET UPLOAD,AMI PURPOSE ONLY (FOR OILFIE |
| (USED) X102243300 MOTOR,DOWNHOLE BHA 2.875 INCH NATIONAL OILWELL VARCO USA,OSS ASSET UPLOAD,AMI PURPOSE ONLY (FOR OILFIE |
| OILFIELD EQUIPMENT – SLIP ELEVATOR 5-1/2 IN SERIES Y MODEL MYC 125 TON VARCO 24072-2 |
| OILWELL DRILLING RIG SPARE; P/O 2014R-1093: VARCO SDXL 5″ ROTARY HAND SLIPS |
| HANDLE SLIP RIGHT F/SDXL RTRY SLIP VARCO 3767 (OILWELL DRILLING RIG SPARE) |
| HANDLE SLIP LEFT F/SDXL ROTARY SLIP VARCO 3768 (OILWELL DRILLING RIG SPARE) |
| PIN HANDLE W/WASHER & COTTER F/SLIP VARCO 3769 (OILWELL DRILLING RIG SPARE) |
| KIT 9-3/4 IN HINGE PIN SDML/SDXL VARCO 2192 (OILWELL DRILLING RIG SPARE) |
| SCREW INST RETAIN WITH WASHER VARCO 3745 (OILWELL DRILLING RIG SPARE) |
| NUT SCREW KIT 6 PIECE VARCO 3737 (OILWELL DRILLING RIG SPARE) |
| WASHPIPE 4 INCH BORE 7500 POUNDS PER SQUARE INCH VARCO 30123438 (OILWELL DRILLING RIG SPARE) |
| PACKING KIT WASHPIPE 4 STD VARCO 30123440-PK (OILWELL DRILLING RIG SPARE) |
| DIE UPPER ST80 VARCO 30174222 (OILWELL DRILLING RIG SPARE) |
| DIE LOWER SET ST80 VARCO 30172029 (OILWELL DRILLING RIG SPARE) |
| BUTTON CIRCULAR EA 7 IN – 7-5/8 IN VARCO 2619 (OILWELL DRILLING RIG SPARE) |
| POTENTIONER RTD 4 X IS INPUT VARCO 140698-4 (OILWELL DRILLING RIG SPARE) |
| CLAMP SAFETY 2-7/8 IN -4 1/8 IN MP S VARCO BJ 33030 |
| CLAMP SAFETY 9-1/4 IN – 10 -1/2 IN MP – S- VARCO BJ 33015 |
| ACTUATOR ASSEMBLY IBOP VARCO 118510 |
| CONNECTOR O-RING BOSS/37 VARCO (OILWELL EQUIPMENT) |
| RING SNAP REPLACES PN 11809 VARCO 944524-318 (OILWELL EQUIPMENT) |
| CYLINDER ASSEMBLY AIR VARCO 11800 (OILWELL EQUIPMENT) |
| LATCH ASSEMBLY VALVE 350 500 VARCO 16822 (OILWELL EQUIPMENT) |
| ELBOW PIPE 90 DEGREE 37 DEGREE JIC VARCO 5650646S (OILWELL EQUIPMENT) |
| TUBE ASSEMBLY LOWER 500T SL VARCO 13809 (OILWELL EQUIPMENT) |
| HOSE ASSEMBLY LOWER VARCO 18269 (OILWELL EQUIPMENT) |
| HOSE ASSEMBLY FOR 350 TON CASING ELEVATOR SPIDER VARCO 18268 (OILWELL EQUIPMENT) |
| FITTING GREASE STRAIGHT VARCO 53201 (OILWELL EQUIPMENT) |
| BAND ASSEMBLY BRAKE W/LINING CABOT VARCO 12001 DRAWWORKS (OILWELL EQUIPMENT) |
| FILTER & O-RING KIT GEAR OIL VARCO 30111013-KIT (OILWELL EQUIPMENT) |
| ELEMENT FILTER 25 MICRON SCHROEDER VARCO 30175768-1 (OILWELL EQUIPMENT) |
| ROLLER KNURLED VARCO 30160614 (OILWELL EQUIPMENT) |
| SEAL KIT FACE WASHPIPE 4 IN BORE VARCO 30182002-500 (OILWELL EQUIPMENT) |
| PIN YOKE LINK TILT PH100 VARCO 30177573 (OILWELL rig123.net’ target=’_blank’>DRILLING rig123.net’ target=’_blank’>RIG SPARE) |
| PIN COTTER VARCO 51435-20 (OILWELL DRILLING RIG SPARE) |
| NUT HEX SELF LOCKING VARCO 51810-C (OILWELL DRILLING RIG SPARE) |
| WASHER LOCK FOR PIPE HANDLER PH-60 VARCO 50910C (OILWELL DRILLING RIG SPARE) |
| WRENCH SOCKET HEX .88 VARCO 77408 (OILWELL DRILLING RIG SPARE) |
| SEAL KIT FACE WASHPIPE 4 IN BORE VARCO 30182002-500 (OILWELL DRILLING RIG SPARE) |
| SPARES KIT IBOP LOWER VARCO 953852 LARGE BORE(OILWELL DRILLING RIG SPARE) |
| CAPSCREW HEX HEAD MODIFIED VARCO 30176284(OILWELL DRILLING RIG SPARE) |
| PIN RETAINER 1DIA X 4.6 MS15 VARCO 30122165 (OILWELL DRILLING RIG SPARE) |
| VALVE DIRECTIONAL CONTROL PLS5/MHH VARCO 110538-R4 (OILWELL DRILLING RIG SPARE) |
| MOTOR HYDRAULIC PARKER ST-120 P VARCO M364000499(OILWELL DRILLING RIG SPARE) |
| SEAL V RING VARCO P364000028(OILWELL DRILLING RIG SPARE) |
| RING RETAINING EXTERNAL VARCO 116920-215(OILWELL DRILLING RIG SPARE) |
| HOUSING UPPER BEARING VARCO M364000485(OILWELL DRILLING RIGSPARE) |
| HOUSING LWR BEARING VARCO M364000479(OILWELL DRILLING RIG SPARE) |
| O-RING SMO-CWH-0330 FOR WISH PIPE MANU:VARCO INTERNATIONAL INC PART:51300-348F (OILWELL EQUIPMENT) |
| SLIP ASSEMBLY 3-1/2 YC-ELEV W/CERT VARCO 34931Y (OILWELL EQUIPMENT) |
| GUIDES PLATES YC 3-1/2 VARCO 26827-1 (OILWELL EQUIPMENT) |
| INSERT REDUCING VARCO 24781 (OILWELL EQUIPMENT) |
| PLATE 4 IN BOTTOM G YC & HYC ELEVATOR 2 REQ VARCO 26827 (OILWELL EQUIPMENT) |
| INSERTS REGULAR VARCO 16408 (OILWELL EQUIPMENT) |
| SLIP SETTING RING 4-1/2 IN OD YC ELEVATOR VARCO 30219 (OILWELL EQUIPMENT) |
| PLATE G 4-1/2 BOTTOM YC & HYD ELEVATOR VARCO 24071-4 (OILWELL EQUIPMENT) |
| SLIP 5-1/2 IN X 5 IN F/Y ELEVATOR MYC 125 TON VARCO 24072Y7 (OILWELL EQUIPMENT) |
| PLATE GUIDES 5-1/2 IN X 5 IN SLIP ASSEMBLY SLIP ELEVATOR MYC 125 TON VARCO 24071 (OILWELL EQUIPMENT) |
| ELEVATOR SLIP TYPE MYC COMPLETE LESS SLIP 125 TON VARCO 200360Y (OILWELL EQUIPMENT) |
| INSERT VARCO BJ 16407 (OILWELL EQUIPMENT) |
| RETAINER INSERT 5-1/2 OD YC ELEVATOR VARCO 30224 (OILWELL EQUIPMENT) |
| RING SLIP SETTING FOR 5-1/2 IN SLIP ASSEMBLY F/Y SLIP TYPE ELEVATOR MYC 125 TON VARCO 30223 (OILWELL EQUIPMENT) |
| PLATE GUIDES 5-1/2 IN SLIP ASSEMBLY F/Y SLIP ELEVATOR MYC 125 TON 2 PER SET VARCO 24071-1 (OILWELL EQUIPMENT) |
| PIN FOR ROTARY TONG VARCO BJ17194 |
| INSERT ROTARY SLIP SET OF 36 VARCO -BJ (OILWELL EQUIPMENT) |
| DIE UPPER ST80 VARCO (OILWELL EQUIPMENT) |
| BUTTON SET CIRCULAR F/13-3/8 IN CMS -XL DRILL COLLAR SLIPS VARCO BJ (OILWELL EQUIPMENT) |
| INSERT ROTARY SLIPS 5-1/2 IN VARCO 2170 (SHIP SPARES) |
| JAW LH LOWER VARCO (SHIP SPARES) |
| SEAT 46529 SMO-RIG-807-0653 MFR: NATIONAL OILWELL VARCO MPN:46529 REQUIRED FOR HCR VALVE FOR EQUIPMENT HCR VALVE MODEL N |
| STEM BALANCE 66935 SMO-RIG-807-0653 MFR: NATIONAL OILWELL VARCO MPN:66935 REQUIRED FOR HCR VALVE FOR EQUIPMENT HCR VALVE |
| SEAL SEAT 45283 SMO-RIG-807-0653 MFR:NATIONAL OILWELL VARCO MPN:45283 REQUIRED FOR HCR VALVE FOR EQUIPMENT HCR VALVE MOD |
| BUSH LOWER STEM 29848 SMO-RIG-807-0653 MFR:NATIONAL OILWELL VARCO MPN:29848 REQUIRED FOR HCR VALVE FOR EQUIPMENT HCR VAL |
| SEAL STEM 45284 SMO-RIG-807-0653 MFR: NATIONAL OILWELL VARCO MPN:45284 REQUIRED FOR HCR VALVE FOR EQUIPMENT HCR VALVE MO |
| BUSH UPPER STEM 23876 SMO-RIG-807-0653 MFR: NATIONAL OILWELL VARCO MPN: 23876 REQUIRED FOR HCR VALVE FOR EQUIPMENT HCR V |
| SEAL WIPER 36303 SMO-RIG-807-0653 MFR:NATIONAL OILWELL VARCO MPN: 36303 REQUIRED FOR HCR VALVE FOR EQUIPMENT HCR VALVE M |
| STEM BALANCE GUIDE RING 36304 SMO-RIG-807-0653 MFR: NATIONAL OILWELL VARCO MPN:36304 REQUIRED FOR HCR VALVE FOR EQUIPMEN |
| O-RING 10862 SMO-RIG-807-0653 MFR:NATIONAL OILWELL VARCO MPN:10862 REQUIRED FOR HCR VALVE FOR EQUIPMENT HCR VALVE MODEL |
| VALVE PROPORTIONAL ATEX SMO-807-0743 FOR EQUIPMENT TOPDRIVE LINK TILT ASSY MFR:VARCO INTERNATIONAL INC MPN:30176027-PC1 |
| CYLINDER FHYDRAULIC 5.0 BORE X 10.0 STOKE VARCO (OILWELL EQUIPMENT) |
| ASSEMBLY CYLINDER CLAMP ST120 VARCO (OILWELL EQUIPMENT) |
| ASSEMBLY CYLINDER SPIN WRENCH ST120 VARCO (OILWELL EQUIPMENT) |
| RETAINER SPRING ST120 VARCO (OILWELL EQUIPMENT) |
| RING RETAINING VARCO (OILWELL EQUIPMENT) |
| PIN ARM HINGE VARCO (OILWELL EQUIPMENT) |
| PIN BOGEY VARCO (OILWELL EQUIPMENT) |
| BEARING ARM PIVOT VARCO (OILWELL EQUIPMENT) |
| BEARING SPHERICAL PLAIN 0.625 ID VARCO (OILWELL EQUIPMENT) |
| BUSHING VARCO (OILWELL EQUIPMENT) |
| RING RETAINING-EXT HD VARCO (OILWELL EQUIPMENT) |
| RING RETAINING -EXT VARCO (OILWELL EQUIPMENT) |
| NUT CASTLE FLANGE VARCO (OILWELL EQUIPMENT) |
| PIN COTTER VARCO (OILWELL EQUIPMENT) |
| CAPSCREW HEX HEAD METRIC CLASS 10.9 VARCO (OILWELL EQUIPMENT) |
| WASHER NORD LOCK VARCO (OILWELL EQUIPMENT) |
| CONNECTOR O-RING BOSS/37 VARCO (OILWELL EQUIPMENT) |
| CONNECTOR O-RING BOSS/37 VARCO (OILWELL EQUIPMENT) |
| WASHER NORD LOCK VARCO (OILWELL EQUIPMENT) |
| WASHER NORD LOCK VARCO (OILWELL EQUIPMENT) |
| WASHER NORD LOCK VARCO (OILWELL EQUIPMENT) |
| PLATE COVER VARCO (SHIP SPARES FROM ITEM SR.NO. 1 TO SR.NO. 7) |
| WASHER NORD LOCK VARCO |
| RING RETAINING VARCO |
| RING RETAINING EXTERNAL VARCO |
| SEAL V RING VARCO |
| CAPSCREW HEX HEAD MODIFIED VARCO |
| ( 1% RD PAID) O-RING, FOR VARCO 750TDS TOP DRIVE (OILWELL EQUIPMENT) |
| OIL WELL SUPPLIES – SET OF 216 CIRCULAR BUTTONS F/ VARCO 1338″ CMS XL CASING SLIP |
| KIT SPLIT-SEAL GEARBOX ADS VARCO M734000279 (OILWELL EQUIPMENT) |
| SEAL ASSEMBLY VARCO 30160666-4 (OILWELL EQUIPMENT) |
| SLIDE RING VARCO 30173757 (OILWELL EQUIPMENT) |
| ROLLER KNURLED VARCO 30160614 (OILWELL EQUIPMENT) |
| GAUGE 3000 PSI FOR TW60/HP41 VARCO 14783 (OILWELL EQUIPMENT) |
| RING SLIDE VARCO 30160745 (OILWELL EQUIPMENT) |
| SEAL ASSEMBLY VARCO 30160666-2 (OILWELL EQUIPMENT) |
| HOSE BLOWER 10 IN X 25 FT FLEX HD FOR BLOWER ASSEMBLY VARCO 107590 (OILWELL EQUIPMENT) |
| CLAMP HOSE 2.5-12.25 SCD VARCO 78801 (OILWELL EQUIPMENT) |
| GASKET VARCO 78802 (OILWELL EQUIPMENT) |
| NUT HEX SELF LOCKING VARCO 51814-C (OILWELL EQUIPMENT) |
| CAPSCREW HEX HEAD DRILLED VARCO 50008-20-C5D (OILWELL EQUIPMENT) |
| SUB SAVER TDS-4S TOP DRIVE VARCO 91786604 (OILWELL EQUIPMENT |
| PART NO. PR1003A-19 -TACHOMETER, 250 RPM, VARCO 96218-3 (OIL WELL EQUIPMENT SPARES) |
| ELEVATOR ASSEMBLY TA 4-3/4 DC ZIP LIFT W/ CERT VARCO 32754Y435 (OILWELL EQUIPMENTS) (QTY 1 NUM) |
| PART NO.2507 VARCO 8″-9-1/2″ DCS-L DRILL COLLAR SLIP COMPLETE WITH CIRCULAR BUTTONS, MFGR: VARCO(PO 04-0008491) |
| OILWELL SUPPLIES : (QTY:2NOS) PIN, DOWEL, VARCO P/N 51216-24 |
| 31-7-2-VARCO (IMITATION JEWELLERY) LADIES 6 ON A CARD STRETCH & ADJUSTABLE BRACELETS WITH METAL BEADS DETAIL(QTY 27 PCS) |
| SEAL KIT PLS1 VARCO 98006-33N (OILWELL EQUIPMENT) |
| CARTRIDGE CHECK VALVE TDS95 VARCO 93548-1S30N (OILWELL EQUIPMENT) |
| CART CHECK 30PSI PDM VARCO 94536-130N (OILWELL EQUIPMENT) |
| VALVE CHECK PILOT TO CLOSE VARCO 112802-10 (OILWELL EQUIPMENT) |
| O-RING VARCO 51300-219-B (OILWELL EQUIPMENT) |
| PLUG ORIFICE .125 NPT .091 IN INDIA VARCO 94042-23 (OILWELL EQUIPMENT) |
| PLUG O-RING 562-18 THD VARCO 87196-6-S (OILWELL EQUIPMENT) |
| PLUG O-RING 750-16 THD VARCO 87196-8-S (OILWELL EQUIPMENT) |
| PLUG O-RING SRT THD REC HEX VARCO 87196-10-S (OILWELL EQUIPMENT) |
| PLUG O-RING SERT THD REC HX VARCO 87196-10-5 (OILWELL EQUIPMENT) |
| PLUG O-RING SRT THD REC HX VARCO 87196-20-S (OILWELL EQUIPMENT) |
| O-RING 51300232B VARCO (OILWELL EQUIPMENT) |
| O-RING 51300237B VARCO (OILWELL EQUIPMENT) |
| SEAL KIT AR3200 VARCO 98006-13N (OILWELL EQUIPMENT) |
| SEAL KIT AR3200 VARCO 98006-12N (OILWELL EQUIPMENT) |
| SEAL KIT CARTRIDGE VALVE VARCO rig123.net’ target=’_blank’>DRILLING SYSTEMS 9800642N (OILWELL EQUIPMENT) |
| VALVE CHECK PILOT TO CLOSE VARCO 112802-10 (OILWELL EQUIPMENT) |
| PACKING KIT WASHPIPE 4 STD VARCO 30123440-PK (OILWELL EQUIPMENT) |
| DIE GRIP UPPER VARCO 30160380-500 (OILWELL EQUIPMENT) |
| CAPSCREW SOCKET HEAD VARCO 55109-8-C (OILWELL EQUIPMENT) |
| SUPPLY OF NOV MAKE SPARES, VARCO BJ PILOT TO OPEN CHECKVALVE WITH BODY BCV |
| SUPPLY OF NOV MAKE SPARES, VARCO BJ PRESSURE REDUCINGCATRIDGE |
| SUPPLY OF NOV MAKE SPARES, VARCO BJ REDUCER INT. 37’/37′ |
| SUPPLY OF NOV MAKE SPARES, VARCO BJ REDUCER,INT. 37’/37′ |
| SUPPLY OF NOV MAKE SPARES, VARCO BJ REDUCER |
| SUPPLY OF NOV MAKE SPARES, VARCO BJ CONNECTOR,O-RING BOSS37′ |
| SUPPLY OF NOV MAKE SPARES, VARCO BJ ELBOW,O-RING BOSS |
| OILWELL SUPPLIES: (QTY:3 NOS) KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ C/O: FOLLOWING ITEMS 2 EA. 30160380 DIE UPPER DO |
| OILWELL SUPPLIES: (QTY:3 NOS) KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: THE FOLLOWING ITEMS 2-EA 30160382 DIE LOWER |
| OILWELL SUPPLIES: (QTY:6 NOS) KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ C/O: FOLLOWING ITEMS 2 EA. 30160380 DIE UPPER DO |
| OILWELL SUPPLIES: VARCO, TYPE SDS, MEDIUM ROTARY 3(THREE) SEGMENT, SLIP. SLIP BODY SIZE 3-1/2″ DRESSED WITH 2-7/8″ SLIP |
| OILWELL SUPPLIES: VARCO, TYPE SDML, MEDIUM ROTARY 3(THREE) SEGMENT, SLIP. SLIP BODY SIZE 3-1/2″ DRESSED WITH 3-1/2″ SLIP |
| (SPARE PARTS FOR OILWELL EQUIPMENT/RIG)VARCO BJ FLEXIBLE COULING FPR HYDRAULIC POWER UNIT (PART NO. 73884) (PO NO..40500 |
| OIL WELL SUPPLIES: MOTOR HYDRAULIC MACH TDS-9 TDS-11 SMO RIG-807-0969 FOR EQUIPMENT FOR TDS 10 R MFR VARCO INTERNATIONA |
| INSERT, DRILL COLLAR SLIPS, VARCO DCS (OILFIELD SUPPLIES) |
| INSERT KIT FOR SLIP ASSEMBLY 3-1/2 IN VARCO 51202277-350 (OILWELL EQUIPMENT) |
| P.NO.56510-8-10-S VARCO BJ TEE EXT.PIPE(OILWELL EQUIPMENT SPARES) |
| P.NO.56506-16-12-S VARCO BJ ELBOW(OILWELL EQUIPMENT SPARES) |
| P.NO.56525-8-8-S VARCO BJ TEE 37(OILWELL EQUIPMENT SPARES) |
| P.NO.56556-10-6-S VARCO BJ REDUCING O RING(OILWELL EQUIPMENTSPARES) |
| P.NO. 50808-R-C VARCO BJ WASHER, FLAT(OILWELL EQUIPMENT SPARES) |
| PIN, COTTER 1/8 IN X 3/4 IN SS VARCO FINGERBOARD DWG NO. 93067 |
| OIL WELL SUPPLIES: (QTY: 6 NOS) KIT DIE UPPER FOR VARCO ST80-H SPIN TORQ C/O: FOLLOWING ITEMS 2 EA. 30160380 DIE UPPER D |
| BEARING ARM PIVOT VARCO M364000474 |
| BEARING SPHERICAL PLAIN 0.625 ID VARCO M364000730 |
| VALVE DIRECTIONAL 3-WAY /2-POS DETENTED VARCO P854000079-10N |
| VALVE PILOT VARCO 30158739-3 |
| SCREW SOCKET HEAD METRIC VARCO 50168020F04 |
| VALVE VTRL MODULAR HYDR ST 120 VARCO M364000422-6-60-75 |
| VALVE VTRL MODULAR HYDR ST120 VARCO M364000422-4-60-75 |
| CONNECTOR VARCO 56529-6-4-S |
| CONNECTOR O-RING BOSS/37 VARCO 56529-6-6S |
| WASHER NORD LOCK VARCO 30183573-M10-C |
| ELEMENT FILTER PHM31 VARCO 92537-E-216 |
| ELEMENT FILTER 30184446-C3E VARCO 3018446= C3E |
| SEAL KIT FLOOR 4 IN ID ACCUMULATOR VARCO 87605-1 |
| VALVE GAS FILL VARCO 30152608 |
| BUSHING 5-1/2 IN IEU DP VARCO 50000675Y780 (OILWELL EQUIPMENT) |
| BELLOW ACTUATOR SSW-40 SPINNING VARCO 73115-1(PO IC-0008923) |
| GASKET VARCO 73092 FOR SPINNING WRENCH SSW-40 |
| VALVE, SOLENOID ATOS 4/2 SINGLE SOLENOID VALVE EEXD 24 VDC,VARCO BJ, P/N 112554-D2-SHIP SPARES FOR DRILLIG VESSEL MV”CH |
| ELEVATOR ASSEMBLY TA 4-3/4 DC ZIP LIFT W/ CERT VARCO 32754Y435 (OILWELL EQUIPMENTS) (QTY 1 NUM) |
| REPAIR KIT UPPER IBOP PH-50 STD AND NA SMO-RIG -807-0979 FOR EQUIPMENT :IBOP MFR EQUIPMENT:IBOP MFR:VARCO INTERNATIONAL |
| JAW ASSEMBLY NC38-NC46 PH100 VARCO 30125051 (OILWELL EQUIPMENT) |
| GUIDE ASSEMBLY STAB 4.75-6.0 TJ PH100 VARCO 125157+30 (OILWELL EQUIPMENT) |
| ELEVATOR SPL CL ASSEMBLY PSL1 4 IN 180 VARCO 200009Y400 (OILWELL EQUIPMENT) |
| REDUCER: VARCO BJ INT 37’/37 |
| 1 NUM VALVE, PRV, COUNTER BALANCE MANIFOLD, FOR TOP DRIVE, VARCO 77615 |
| SUB SAVER TDS-4S TOP DRIVE VARCO 91786604 (OILWELL EQUIPMENT) |
| SET: BOWLS, INSERT, VARCO, N0.3 |
| VARCO GG 350T 5″ AIR OPERATED ELEVATOR |
| 5 NUM RETAINER, HINGE PIN, VARCO P/N 55505 |
| 8 NUM SPRING, SLIP FOR VARCO BJ SLIP TYPE ELEVATOR |
| OIL WELL SUPPLIES: (QTY: 2 NOS) KIT DIE UPPER FOR VARCO ST80-H SPIN TORQ C/O: FOLLOWING ITEMS 2 EA. 30160380 DIE UPPER D |
| OIL WELL SUPPLIES: (QTY: 2 NOS) KIT DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: THE FOLLOWING ITEMS 2-EA 30160382 DIE LOWE |
| BUTTON KIT CIRCULAR 6-3/4 – 8-1/4 DC SMO-RIG-807-0959 FOR EQUIPMENT DRILL COLLAR SLIP 8-1/4 DC SLIPS MFR : VARCO INTERNA |
| PUMP ROD 3151004 SMO-RIG-806-0903 FOR EQUIPMENT BOP TEST PUMP MFR : NATIONAL OILWELL VARCO INC (OILWELL EQUIPMENT) |
| WASHPIPE 3″ BORE HARD TUNGSTEN COATED MFR : VARCO INTERNATIONAL MPN : 123289-TC (OILWELL EQUIPMENT) |
| JAW VARCO 90851 |
| RETAINER DIE VARCO 16652 |
| CAPSCREW HEX HEAD DRILLED VARCO 50006-4-C5D |
| LONGITUDINAL SHOE P/N 20777 MAKE:TUBOSCOPE A VARCO CO NEW P/N 4056693000(SPARE PARTS FOR LEAKAGE FLUX SYSTEM) |
| CYLINDER REST PIPE VARIALBLE FOR PIPE HANDELER MANU: VARCO INTERNATIONAL INC PART NO. : M851001178 (OILWELL EQUIPMENT) |
| O-RING OUTBOARD BEARING COVER BUNA-N USED ON: VARCO NATIONAL OILWELL(MISSION MAGNUM PUMP) MFR : NOI-MISSIONMPN : 7220001 |
| OILWELL SUPPLIES – LOCK LATCH VARCO BJ 13152 |
| OILWELL SUPPLIES – BAR LOCK SJL-SPL ELEVATOR VARCO 200052 |
| OILWELL SUPPLIES – PIN HINGE VARCO 200050 |
| SEAL HS ADS-10 GUARDIAN SEAL VARCO M734000201-39 (OILWELL EQUIPMENT) |
| SHIM PACK LOW SPEED BEARING ADS-10 VARCO M734000201-80 (OILWELL EQUIPMENT) |
| ELEMENT FILTER PHM3I VARCO 92537-E-216 (OILWELL EQUIPMENT) |
| ELEMENT FILTER REPLACEMENT VARCO BJ 119021ELE (OILWELL EQUIPMENT) |
| ELEVATOR ASSEMBLY SJL-CL 7 IN OD CASING W1 CERT VARCO 70501 Y 136 (OILWELL EQUIPMENTS ) |
| ELEVATOR SPL – CL ASSEMBLY PSL 1 5 IN VARCO 200008Y500 (OILWELL EQUIPMENTS ) |
| PLUG DRIVE HOLE 27 – 1/2 VARCO 6611 ( OILWELL EQUIPMENTS) |
| VARCO TYPE SDS MEDIUM ROTARY 3 ( THREE) SEGMENT SLIP SLIP BODY SIZE 3-1/2″ DRESSED ( PARTS & SPARES OF DRILLING RIG ) |
| SPACER LOWER 4 IN WASH PIPE TDS VARCO 30123436 (OILWELL EQUI |
| OILFIELD EQUIPMENT- WASHER LOCK HI COLLAR VARCO (P/N :51108-C) |
| OILFIELD EQUIPMENT- KEY.50 SQUARE X 2.8 1018STL VARCO (P/N : 16532) |
| OILFIELD EQUIPMENT- CAPrig123.net’ target=’_blank’>SCREW SOCKET HEAD VARCO (P/N : 50108-16-C) |
| OILFIELD EQUIPMENT- CAPSCREW SOCKET HEAD UNC VARCO (P/N : 50108-10-C) |
| OILFIELD EQUIPMENT- CAPSCREW HEX HEAD DRILLING VARCO (P/N : 50008-7-C5D) |
| OILFIELD EQUIPMENT– CLAMP HOSE RUBBER LINED VARCO (P/N : 980267-8) |
| INSERT KIT FOR INSERT CARRIER 9-5/8 IN VARCO 51202270-963 PART NO.2656 (OILWELL EQUIPMENT) |
| OILFIELD EQUIPMENT- O RING – MOTOR HOUSING: VARCO; 51300-458-B |
| OILFIELD EQUIPMENT- SEAL, LIP, PINION VTN, FOR TDS35 MECHANICAL TOP DRIVE MOTOR, VARCO APPLICATION |
| GOODS BEING IMPORTED FOR PETROLEUM OPERATION: DIE, VARCO, 30174222, UPPER, PACKAGE, F/ST-80 WRENCH(MEXICO) |
| OILWELL SUPPLIES: VARCO BJ WASHER, FLAT 50808-R-C (QTY:2 NUM) |
| PIIN, RETAINING, VARCO P / N 30122165 |
| BUSHING, SET ELEV BRONZE GUIDE TO FIT VARCO MASTER BUSHING ID WEAR GUIDE NO. 85974-6 FOR 5 IN DRILL PIPE WITH ID OF 7.50 |
| SWITCH,TEMPERATURE TURE TF 165,VARCO P/N 30151888-D |
| 2 NUM PIN, ROLL, FOR SAFETY CLAMP, VARCO P/N 51604-18 |
| GOODS BEING IMPORTED FOR PETROLEUM OPERATION: LIFTER, VARCO, 50001130, 2 WAY, BOWL, COMPLETE ASSY (NETHERLAND) |
| BEARING, VARCO, 9942320, SPHERICALLINK-TILT (USA) |
| O-RING, FOR VARCO 750TDS TOP DRIVE |
| SEAL, VARCO P/N H7918599012 |
| GOODS BEING IMPORTED FOR PETROLEUM OPERATION: GEAR-LOW, VARCO, 116624, COMPOUND, F/TDS-4H |
| SHAFT,VARCO,11276,GEAR,HIGH,F/TDS-4H(USA) |
| SCREW,VARCO,5000810C5D,CAP-HEX,HD,DRILLED(USA) |
| 94518-23HN VARCO CARTRIDGE (OILWELL EQUIPMENT SPARES) |
| 94518-23HN VARCO BJ CRTRIDGE (OILWELL EQUIPMENT SPARES) |
| OILFIELD EQUIPMENT- INSERT VARCO 5.500 IN X 5.500 IN (P/N : AA-0508-0508-0) |
| RING, LABYRINTH FOR VARCO 750 TDS TOP DRIVE |
| SPACER, MAIN STEM FOR VARCO TOP DRIVE |
| ISOLATOR, UPPER BEARING, LARGE FOR VARCO 750 TON TDS, |
| CLAMP, SAFETY 8 IN TO 9-1/4 IN TYPE MP-R VARCO |
| CYLINDER ALIGNMENT 4 IN VARCO PART NO. 30174223 (OILWELL EQUIPMENT) |
| SWITCH PRESSURE VARCO (P/N#203016) (OILWELL EQUIPMENT) |
| VALVE SOLENOID ATOS VARCO (P/N#112554-J2-BT) (OILWELL EQUIPMENT) |
| OIL WELL SPARES. KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ |
| OILWELL SUPPLIES: WASHPIPE, ASSY TDS VARCO (QTY:1 NOS) |
| 5 KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ |
| 3 KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: |
| 385015, VARCO-E EXTERNAL PHOTOCELL – (FOR TRAFFIC CONTROL EQUIPMENT) |
| 1 NUM JAW, LUG, ASSEMBLY, 3-1/2″-8-1/4″, FOR MANUAL TONG TYPE HT65, VARCO P/N 200546-1 |
| 1 NUM JAW, LUG, ASSEMBLY, 3-1/2″-8-1/4″, FOR MANUAL TONG TYPE HT65, VARCO P/N 200546-1 |
| OILFIELD EQUIPMENT RING.GUIDE,TORQUE TUBE,VARCO P/N 90843 |
| PIN-HINGE, VARCO, 2525, DC/CMSXL (MEXICO) |
| SEGMENT, VARCO, 2570, INTERMEDIATE, DCS-S DRILL COLLAR SLIPS, 4X4 7/8 (MEXICO) |
| SLIP, VARCO, 2569, DCSS, LEFT, SEGMENT (MEXICO) |
| SEGMENT, VARCO, 2568, RIGHT, F/ DCS-S 4X4 7/8 SLIPS (MEXICO) |
| SEGMENT, VARCO, 2554, RIGHT, F/ DCS-R SLIPS (MEXICO) |
| VARCO PNEUMATIC SAFETY SPINNING WRENCH MODEL SSW-40 FOR 3-1/2″ – 9-1/2″ OD D/P & D/C COMPLETE WITH VERTICAL POSITIONING |
| MDL,ISMI, MASTER – SPARES FOR ADVANCE INSTRUMENTATION SYSTEM, MAKE:NATIONAL OILWELL VARCO CONSISTING WITH (INV NO 405000 |
| USED OILWELL EQUIPMENT GUIDE, TOP 13-3/8 IN, 14 IN 35 0/500/750 TON VARCO 18419-5(1 SET = 2PCS) |
| USED OILWELL EQUIPMENT – GUIDE, BOTTOM ELEVATOR 7-5/8 IN 350/500 TON VARCO 11792 |
| USED OILWELL EQUIPMENT – SLIPS, ELEVATOR 14 500 TON VARCO 7-5/8 |
| GASKET, SEAL RETAINER, VARCO P/N 75981(SL NO 2/24 OF LIST 13) |
| KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ |
| INSERT SET,VARCO 2170-54 |
| GOODS BEING IMPORTED FOR PETROLEUM OPERATION: SLIP, VARCO, 15520, 5-1/2 IN, SLIP-ASSEMBLY, SDXL, WITH 5 IN INSERTS (MEXI |
| KIT, VARCO, 217054, SDXL/SDL (MEXICO) |
| OILWELL DRILLING RIG SPARES : 2013R-1138:VARCO 500 TON ON SL 14 TYPE CASING ELEVATOR/SPIDER LESS SLIPS WITH COVER,AIR MA |
| VALVE, REDUCING, PRESSURE, PLS, VARCO[SL.NO.24/24 OF LIST 13] |
| ASSEMBLY, HOSE, FOR TORQUE WRENCH, VARCO DSS (HOU) P/N 58592N170017 [PO NO: 0001067755] (QTY. 1 NOS) |
| LOOP, SERVICE, HYDRAULIC, COMPLETE, VARCO P/N 108593-37-10-3 [S.L. NO. 2/24 OF LIST 13] |
| ROLLER, IDLER, VARCO P/N 83680 [S.L. NO. 2/24 OF LIST 13] |
| OILFIELD EQUIPMET- KEY 16 X 10 X 70 MM VARCO (P/N # 30160617) |
| OILFILED EQUIPMENT- SEAL ASSEMBLY VARCO (P/N # 30160666-4) |
| OILFIELD EQUIPMENT- RING SLIDE VARCO (P/N # 30160745) |
| OILFIELD EQUIPMENT- BEARING ROLLER VARCO (P/N # 30160731) |
| OILFIELD EQUIPMENT- SEAL ASSEMBLY VARCO (P/N # 30160666-2) |
| OILFIELD EQUIPMENT- SLIDE RING VARCO (P/N # 30173757) |
| OILFIELD EQUIPMENT- ROLLER KNURLED VARCO (P/N # 30160614) |
| OILFIELD EQUIPMENT- HOSE HYDRAULIC VARCO (203276-1) |
| OILFIELD EQUIPMENT- PIN DOOR LEVER VARCO (P/N # 203244) |
| OILFIELD EQUIPMENT- DISC VARCO (P/N # 203227) |
| OILFIELD EQUIPMENT- DISC LEVER PIN VARCO (P/N # 203245) |
| OILFIELD EQUIPMENT- RING PUSH BEARING VARCO (P/N # 30160397) |
| OILWELL DRILLING RIG TOOLS : TEST KIT BX ELEVATOR + PS VARCO (P/N# 202539) |
| WASHER, 3/8″ STAINLESS STEEL, VARCO SHAFFER P/N 80-20528(SL NO 2/24 OF LIST 13) |
| HYDRAULIC PRESSURE GUAGE F/HPU MAKE VARCO (P/N: 83418) |
| KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ |
| CONNECTOR, PRESSURE GUAGE, VARCO BJ(SL NO 2/24 OF LIST 13) |
| KIT, REPAIR, FOR BIAS SEQUENCING VALVE, (1003050 1003051). VARCO SHAFFER P/N 9910300[S.L. NO. 2/24 OF LIST 13] |
| OILWELL EQUIPMENT I NUM BUSHING, SET ELEV BRONZE GUIDE TO FIT VARCO MASTER BUSHING ID WEAR GUIDE NO. 859 74-6 FOR 5 IN |
| PIN VARCO SW HINGE PIN F/ST 80 IRON ROUGHNECK (P/N: 301606120) |
| RING VARCO SLIDE (P/N: 301607450) |
| SEAL VARCO BEARING COVER F/ST 80 IRON ROUGHNECK (P/N: 301606260) |
| SEAL VARCO HOUSING F/ST 80 IRON ROUGHNECK (P/N: 30160624) |
| BEARING ROLLER VARCO F/ST 80 IRON ROUGHNECK (P/N: 3016073210) |
| BEARING BALL VARCO F/ST 80 IRON ROUGHNECK (P/N: 301607330) |
| BEARING VARCO F/ST 80 IRON ROUGHNECK (P/N: 301607340) |
| RING, VARCO, LOCKING F/ST – 80 IRON ROUGHNECK (P/N: 301607374-0) |
| SPARES KIT OPERATIONAL SSW40 SPINNING WRENCH. VARCO# 73109-12 (NOV# 373122 SL NO OF LIST 13 OF NOTIFICATION 2/24 |
| BUTTON, SET CIRCULAR, 4-1/2-6 IN SLIP, VARCO[SL.NO.2/24 OF LIST 13] |
| VALVE, BALL, 3/8″ NPT, FOR HYDRAULIC BX-500T ELEVATORS, VARCO P/N 979552-1(SL NO.2/24 OF LIST 13) |
| MODULE, COPROCESSOR PROGRAMMABLE, VARCO P/N 20074876(SL NO.2/24 OF LIST 13) |
| OILWELL DRILLING RIG SPARES : P/O 2013R-0909: VARCO SDXL 5 ROTARY HAND SLIPS |
| SPACER MIDDLE 4 IN WASHPIPE VARCO 30123435 (OILWELL EQUIPMENT) |
| WRENCH WASHPIPE 3 IN BORE VARCO 30150084 (OILWELL EQUIPMENT) |
| SPACER LOWER 4 IN WASH PIPE TDS VARCO 30123436 (OILWELL EQUIPMENT) |
| SPACER UPPER 4 IN WASH PIPE VARCO 30123434 (OILWELL EQUIPMENT) |
| NIPPLE, GREASE, DRIVE TYPE STRAIGHT, VARCO |
| BALL & SEAT LOWER IBOP EXT STOP LG BOR VARCO (P/N# 30177547) (OILWELL EQUIPMENT) |
| SLEEVE VARCO CRANK UPPER/LOWER INTERNAL BLOW OUT PREVENTER FOR ID (P/N#904417) (OILWELL EQUIPMENT) |
| PLUG VARCO 950768 PRESSURE FOR VARCO TOP (P/N#65021080) (OILWELL EQUIPMENT) |
| WRENCH WASHPIPE 3 IN BORE VARCO 30150084 (OILWELL EQUIPMENT) |
| OILFIELD EQUIPMENT- WASHER LOCK HI COLLAR VARCO (P/N :51108-C) |
| OILFIELD EQUIPMENT- KEY.50 SQUARE X 2.8 1018STL VARCO (P/N : 16532) |
| OILFIELD EQUIPMENT- CAPrig123.net’ target=’_blank’>SCREW SOCKET HEAD VARCO (P/N : 50108-16-C) |
| OILFIELD EQUIPMENT- CAPSCREW SOCKET HEAD UNC VARCO (P/N : 50108-10-C) |
| OILFIELD EQUIPMENT- CAPSCREW HEX HEAD DRILLINGVARCO (P/N : 50008-7-C5D) |
| OILFIELD EQUIPMENT– CLAMP HOSE RUBBER LINED VARCO (P/N : 980267-8) |
| INSERT KIT FOR INSERT CARRIER 9-5/8 IN VARCO 51202270-963 PART NO.2656 (OILWELL EQUIPMENT) |
| OILFIELD EQUIPMENT- O RING – MOTOR HOUSING: VARCO; 51300-458-B |
| OILFIELD EQUIPMENT- SEAL, LIP, PINION VTN, FOR TDS35 MECHANICAL TOP DRIVE MOTOR, VARCO APPLICATION |
| GOODS BEING IMPORTED FOR PETROLEUM OPERATION: DIE, VARCO, 30174222, UPPER, PACKAGE, F/ST-80 WRENCH(MEXICO) |
| OILWELL SUPPLIES: VARCO BJ WASHER, FLAT 50808-R-C (QTY:2 NUM) |
| PIIN, RETAINING, VARCO P / N 30122165 |
| BUSHING, SET ELEV BRONZE GUIDE TO FIT VARCO MASTER BUSHING ID WEAR GUIDE NO. 85974-6 FOR 5 IN DRILL PIPE WITH ID OF 7.50 |
| SWITCH,TEMPERATURE TURE TF 165,VARCO P/N 30151888-D |
| 2 NUM PIN, ROLL, FOR SAFETY CLAMP, VARCO P/N 51604-18 |
| GOODS BEING IMPORTED FOR PETROLEUM OPERATION: LIFTER, VARCO, 50001130, 2 WAY, BOWL, COMPLETE ASSY (NETHERLAND) |
| BEARING, VARCO, 9942320, SPHERICALLINK-TILT (USA) |
| O-RING, FOR VARCO 750TDS TOP DRIVE |
| SEAL, VARCO P/N H7918599012 |
| GOODS BEING IMPORTED FOR PETROLEUM OPERATION: GEAR-LOW, VARCO, 116624, COMPOUND, F/TDS-4H |
| SHAFT,VARCO,11276,GEAR,HIGH,F/TDS-4H(USA) |
| SCREW,VARCO,5000810C5D,CAP-HEX,HD,DRILLED(USA) |
| 94518-23HN VARCO CARTRIDGE (OILWELL EQUIPMENT SPARES) |
| 94518-23HN VARCO BJ CRTRIDGE (OILWELL EQUIPMENT SPARES) |
| OILFIELD EQUIPMENT- INSERT VARCO 5.500 IN X 5.500 IN (P/N : AA-0508-0508-0) |
| RING, LABYRINTH FOR VARCO 750 TDS TOP DRIVE |
| SPACER, MAIN STEM FOR VARCO TOP DRIVE |
| ISOLATOR, UPPER BEARING, LARGE FOR VARCO 750 TON TDS, |
| CLAMP, SAFETY 8 IN TO 9-1/4 IN TYPE MP-R VARCO |
| CYLINDER ALIGNMENT 4 IN VARCO PART NO. 30174223 (OILWELL EQUIPMENT) |
| SWITCH PRESSURE VARCO (P/N#203016) (OILWELL EQUIPMENT) |
| VALVE SOLENOID ATOS VARCO (P/N#112554-J2-BT) (OILWELL EQUIPMENT) |
| OIL WELL SPARES. KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ |
| OILWELL SUPPLIES: WASHPIPE, ASSY TDS VARCO (QTY:1 NOS) |
| 5 KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ |
| 3 KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: |
| 385015, VARCO-E EXTERNAL PHOTOCELL – (FOR TRAFFIC CONTROL EQUIPMENT) |
| 1 NUM JAW, LUG, ASSEMBLY, 3-1/2″-8-1/4″, FOR MANUAL TONG TYPE HT65, VARCO P/N 200546-1 |
| 1 NUM JAW, LUG, ASSEMBLY, 3-1/2″-8-1/4″, FOR MANUAL TONG TYPE HT65, VARCO P/N 200546-1 |
| OILFIELD EQUIPMENT RING.GUIDE,TORQUE TUBE,VARCO P/N 90843 |
| PIN-HINGE, VARCO, 2525, DC/CMSXL (MEXICO) |
| SEGMENT, VARCO, 2570, INTERMEDIATE, DCS-S DRILL COLLAR SLIPS, 4X4 7/8 (MEXICO) |
| SLIP, VARCO, 2569, DCSS, LEFT, SEGMENT (MEXICO) |
| SEGMENT, VARCO, 2568, RIGHT, F/ DCS-S 4X4 7/8 SLIPS (MEXICO) |
| SEGMENT, VARCO, 2554, RIGHT, F/ DCS-R SLIPS (MEXICO) |
| VARCO PNEUMATIC SAFETY SPINNING WRENCH MODEL SSW-40 FOR 3-1/2″ – 9-1/2″ OD D/P & D/C COMPLETE WITH VERTICAL POSITIONING |
| MDL,ISMI, MASTER – SPARES FOR ADVANCE INSTRUMENTATION SYSTEM, MAKE:NATIONAL OILWELL VARCO CONSISTING WITH (INV NO 405000 |
| USED OILWELL EQUIPMENT GUIDE, TOP 13-3/8 IN, 14 IN 35 0/500/750 TON VARCO 18419-5(1 SET = 2PCS) |
| USED OILWELL EQUIPMENT – GUIDE, BOTTOM ELEVATOR 7-5/8 IN 350/500 TON VARCO 11792 |
| USED OILWELL EQUIPMENT – SLIPS, ELEVATOR 14 500 TON VARCO 7-5/8 |
| GASKET, SEAL RETAINER, VARCO P/N 75981(SL NO 2/24 OF LIST 13) |
| KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ |
| INSERT SET,VARCO 2170-54 |
| GOODS BEING IMPORTED FOR PETROLEUM OPERATION: SLIP, VARCO, 15520, 5-1/2 IN, SLIP-ASSEMBLY, SDXL, WITH 5 IN INSERTS (MEXI |
| KIT, VARCO, 217054, SDXL/SDL (MEXICO) |
| OILWELL DRILLING RIG SPARES : 2013R-1138:VARCO 500 TON ON SL 14 TYPE CASING ELEVATOR/SPIDER LESS SLIPS WITH COVER,AIR MA |
| VALVE, REDUCING, PRESSURE, PLS, VARCO[SL.NO.24/24 OF LIST 13] |
| ASSEMBLY, HOSE, FOR TORQUE WRENCH, VARCO DSS (HOU) P/N 58592N170017 [PO NO: 0001067755] (QTY. 1 NOS) |
| LOOP, SERVICE, HYDRAULIC, COMPLETE, VARCO P/N 108593-37-10-3 [S.L. NO. 2/24 OF LIST 13] |
| ROLLER, IDLER, VARCO P/N 83680 [S.L. NO. 2/24 OF LIST 13] |
| OILFIELD EQUIPMET- KEY 16 X 10 X 70 MM VARCO (P/N # 30160617) |
| OILFILED EQUIPMENT- SEAL ASSEMBLY VARCO (P/N # 30160666-4) |
| OILFIELD EQUIPMENT- RING SLIDE VARCO (P/N # 30160745) |
| OILFIELD EQUIPMENT- BEARING ROLLER VARCO (P/N # 30160731) |
| OILFIELD EQUIPMENT- SEAL ASSEMBLY VARCO (P/N # 30160666-2) |
| OILFIELD EQUIPMENT- SLIDE RING VARCO (P/N # 30173757) |
| OILFIELD EQUIPMENT- ROLLER KNURLED VARCO (P/N # 30160614) |
| OILFIELD EQUIPMENT- HOSE HYDRAULIC VARCO (203276-1) |
| OILFIELD EQUIPMENT- PIN DOOR LEVER VARCO (P/N # 203244) |
| OILFIELD EQUIPMENT- DISC VARCO (P/N # 203227) |
| OILFIELD EQUIPMENT- DISC LEVER PIN VARCO (P/N # 203245) |
| OILFIELD EQUIPMENT- RING PUSH BEARING VARCO (P/N # 30160397) |
| OILWELL DRILLING RIG TOOLS : TEST KIT BX ELEVATOR + PS VARCO (P/N# 202539) |
| WASHER, 3/8″ STAINLESS STEEL, VARCO SHAFFER P/N 80-20528(SL NO 2/24 OF LIST 13) |
| HYDRAULIC PRESSURE GUAGE F/HPU MAKE VARCO (P/N: 83418) |
| KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ |
| CONNECTOR, PRESSURE GUAGE, VARCO BJ(SL NO 2/24 OF LIST 13) |
| KIT, REPAIR, FOR BIAS SEQUENCING VALVE, (1003050 1003051). VARCO SHAFFER P/N 9910300[S.L. NO. 2/24 OF LIST 13] |
| OILWELL EQUIPMENT I NUM BUSHING, SET ELEV BRONZE GUIDE TO FIT VARCO MASTER BUSHING ID WEAR GUIDE NO. 859 74-6 FOR 5 IN |
| PIN VARCO SW HINGE PIN F/ST 80 IRON ROUGHNECK (P/N: 301606120) |
| RING VARCO SLIDE (P/N: 301607450) |
| SEAL VARCO BEARING COVER F/ST 80 IRON ROUGHNECK (P/N: 301606260) |
| SEAL VARCO HOUSING F/ST 80 IRON ROUGHNECK (P/N: 30160624) |
| BEARING ROLLER VARCO F/ST 80 IRON ROUGHNECK (P/N: 3016073210) |
| BEARING BALL VARCO F/ST 80 IRON ROUGHNECK (P/N: 301607330) |
| BEARING VARCO F/ST 80 IRON ROUGHNECK (P/N: 301607340) |
| RING, VARCO, LOCKING F/ST – 80 IRON ROUGHNECK (P/N: 301607374-0) |
| SPARES KIT OPERATIONAL SSW40 SPINNING WRENCH. VARCO# 73109-12 (NOV# 373122 SL NO OF LIST 13 OF NOTIFICATION 2/24 |
| BUTTON, SET CIRCULAR, 4-1/2-6 IN SLIP, VARCO[SL.NO.2/24 OF LIST 13] |
| VALVE, BALL, 3/8″ NPT, FOR HYDRAULIC BX-500T ELEVATORS, VARCO P/N 979552-1(SL NO.2/24 OF LIST 13) |
| MODULE, COPROCESSOR PROGRAMMABLE, VARCO P/N 20074876(SL NO.2/24 OF LIST 13) |
| OILWELL DRILLING RIG SPARES : P/O 2013R-0909: VARCO SDXL 5 ROTARY HAND SLIPS |
| SPACER MIDDLE 4 IN WASHPIPE VARCO 30123435 (OILWELL EQUIPMENT) |
| WRENCH WASHPIPE 3 IN BORE VARCO 30150084 (OILWELL EQUIPMENT) |
| SPACER LOWER 4 IN WASH PIPE TDS VARCO 30123436 (OILWELL EQUIPMENT) |
| SPACER UPPER 4 IN WASH PIPE VARCO 30123434 (OILWELL EQUIPMENT) |
| NIPPLE, GREASE, DRIVE TYPE STRAIGHT, VARCO |
| BALL & SEAT LOWER IBOP EXT STOP LG BOR VARCO (P/N# 30177547) (OILWELL EQUIPMENT) |
| SLEEVE VARCO CRANK UPPER/LOWER INTERNAL BLOW OUT PREVENTER FOR ID (P/N#904417) (OILWELL EQUIPMENT) |
| PLUG VARCO 950768 PRESSURE FOR VARCO TOP (P/N#65021080) (OILWELL EQUIPMENT) |
| OILFIELD EQUIPMENT- CONNECTOR VARCO (P/N : 56501-8-6-S) |
| BUTTON CIRCULAR CASING SLIP VARCO |
| INSERT,VARCO 3.5 X 2.75 |
| INSERT ,VARCO 3.500″ X 3.500′ |
| INSERT,VARCO OVERSIZE 9.625″ X 9.875 |
| INSERT VARCO REDUCER 14″ X 13.625 |
| OILWELL rig123.net’ target=’_blank’>DRILLING rig123.net’ target=’_blank’>RIG SPARES : ASSEMBLY DRUMSHAFT 1-3/4 IN WIRE ADS T VARCO (P/N # 30154105-2) |
| PIN, VARCO, 30150294, HYDRAULIC, DRAG, LINK-TILT, F/TOPDRIVE MODEL TDS 4HF(USA) |
| SEGMENT, VARCO, 2555, LEFT END F/ DCS-R(MEXICO) |
| KIT, VARCO, 30111013-4(USA) |
| KIT, SERVICE LOOP, COMPOSITE, FOR TDS-10, VARCO P/N 30156378-92-20-20 |
| BUSHING, SET ELEV BRONZE GUIDE TO FIT VARCO MASTER BUSHING ID WEAR GUIDE NO. 85974-6 FOR 5 INDRILL PIPE WITH ID OF 7.50 |
| OIL WELL SPARES. ASSEMBLY, PIN, SLIP RETAINER, FOR BJ CASINGELEVATOR, VARCO P/N 26338. PN: 26338 (01 PC) |
| LOCKWASHER, TAB, 0.40, VARCO |
| COUPLER, VARCO, J10900A-02, FEMALE, 17K, PSI, 1/4 IN, FNPT, (PARKER 1141-63) (USA) |
| COUPLER, VARCO, J10900A-20, M, 17K, PSI, 1/4 IN, FNPT, (PARKER 1141-62) (USA) |
| ELEMENT, VARCO, 82749, FILTER, TDS (PARKER 932633Q) |
| GOODS BEING IMPORTED FOR PETROLEUM OPERATION: FILTER, VARCO, 82747, PRESSURE (PARKER 30P210QHRS50NN1195) |
| CYLINDER ASSY., ALIGN, TDS-8/1000, VARCO P/N 30174224 |
| (13800Y) VARCO 500 TON ”SL”14”SLIP TYPE CASING ELEVATOR/SPIDER LESS SLIPS WITH COVER,AIR-MANUAL OPERATION |
| 8 NUM PIN, COTTER, 3/16″ X 1-1/2″ LONG, 304 STAINLESS STEEL, VARCO P/N 51403-12-S |
| COMPOUND, LOCKING BLUE, VARCO |
| OILFIELD EQUIPMENT- FTG PRSR RLF / VARCO (P/N 30170283) |
| OILFIELD EQUIPMENT- HOUSING BLOWER MODIFIED VARCO (P/N 76643) |
| 56509-6-S VARCO BJ NUT (OILWELL EQUIPMENT SPARES) |
| 55320-C VARCO NUT ,HEX – JAM (UNF -2B) (OILWELL EQUIPMENTSPARES) |
| 50808-R-C VARCO BJ WASHER ,FLAT (OILWELL EQUIPMENT SPARES) |
| 51403-20 VARCO BJ COTTER PIN (OILWELL EQUIPMENT SPARES) |
| IMPELLER BLOWER VARCO PART NO.84821(OILWELL EQUIPMENT) |
| FAN OIL COOL HE UL TDS -4 VARCO PART NO.98141-4 (OILWELL EQUIPMENT) |
| USED-COR2372GL VARCO DRILL COLLAR SLIP TYPE DCS -R RANGE 4-3/4″ -6″ |
| P/N 26940Y1132 – VARCO BJ WELDLESS LINKS 2-3/4 X 132 CAP: 350 TONS Shedule B – 8431438010 – PTS OF OIL & GAS FIELD MACH, |
| POPPET, IND ASSY SLIP JOINT, VARCO P/N 20023552+20 |
| KIT, REPAIR CCSV, VARCO P/N 20027556+20 |
| GOODS BEING IMPORTED OF PETROLEUM OPERATION: SEGMENT,VARCO,2556,ASSY,DCSR,INTERMEDIATE ,SLIP(MEXICO) |
| VALVE CHECK CARTRIDGE PILOT TO OPEN TDS VARCO )P/N # 93547-2B75N) (OILWELL EQUIPMENT) |
| VALVE CARTRIDGE C BALANCE PHM3I VARCO (P/N # 94518-23HN) (OILWELL EQUIPMENT) |
| OILFIELD EQUIPMENT- CAPSCREW HEX HEAD UNC VARCO 5000612C5 |
| USED OILWELL EQUIPMENT – TOP GUIDES 11.3/4″(4.1/2″ TO 14 VARCO) |
| VALVE, BALL, SIZE 3″, PRESSURE 2400, VARCO P/N 228533 |
| POPPET, IND ASSY SLIP JOINT, VARCO |
| CARTRIDGE, FILTER, 25 MICRON, VARCO |
| OIL WELL SPARES. KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: (12 PCS) |
| OILFIELD EQUIPMENT KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ |
| FILTER VARCO PART NO.30152239-115 (OILWELL EQUIPMENT) |
| REGULATOR VARCO PART NO.30152239-114 (OILWELL EQUIPMENT) |
| SEAL ROD REPAIR KIT ABD -2 VARCO PART NO.30152239-112 (OILWELL EQUIPMENT) |
| SERVICE KIT REGULATOR VARCO PART NO.30152239-107 (OILWELL EQUIPMENT) |
| REGULATOR W/GAUGE VARCO PART NO.30152239-100 (OILWELL EQUIPMENT) |
| ELEMENT FILTER VARCO PART NO.30160214-1(OILWELL EQUIPMENT) |
| KIT, REPAIR FOR 1 / 2″ SPM NCB VALVE, H – TYPE, HAND ASSEMBLE, ( REPLACE P / N 9910625 ), VARCO SHAFFER P / N 7401919 |
| VARCO 4 – 1 / 2″ SDML ROTARY SLIP COMPLETE W SL NO OF LIST 13 OF NOTIFICATION 2/24 |
| VARCO 3 – 1 / 2″ SDML ROTARY SLIP COMPLETE W SL NO OF LIST 13 OF NOTIFICATION 2/24 |
| VARCO 3 – 1 / 2″ – 2 – 7 / 8″ SDML ROTARY SLIP COM SL NO OF LIST 13 OF NOTIFICATION 2/24 |
| OILWELL EQUIPMENT – ELEVATORS 24″ VARCO 500 TON SL BODY |
| RING, LOCK, VARCO BJ |
| USED OILWELL EQUIPMENT – VARCO SAFETY CLAMP W/15 SEGMENT ,METAL BOX & WRANCH |
| WASHER LOCK VARCO PART NO.107052 (OILWELL EQUIPMENT) |
| BUTTON, VARCO, 263088, CB-KIT, 6-3/4 IN TO 8-1/4 IN, DCSL(USA) |
| ASSEMBLY, HOSE, FOR VARCO MODLE ST-80 IRON ROUGHNECK, VARCO P/N 59547P29X040 |
| CONVERTER, FREQUENCY/VOLTAGE, VARCO P/N KFU8.UFCEX1 |
| ASSEMBLY,HOSE,FOR VARCO MODLE ST-80 IRON ROUGHNECK,VARCO P/N 59547P29X040(OILWELL EQUIPMENT) |
| 94518-23HN VARCO BJ CARTRIDGE (OILWELL EQUIPMENT SPARES) |
| 50808-R-C VARCO BJ WASHER, FLAT (OILWELL EQUIPMENT SPARES) |
| KIT-JACKET, VARCO, M614001693, SERVICE LOOP(USA) |
| KIT, VARCO, 216954, 5-1/2X5 IN(USA) |
| VARCO BJ REDUCER INT 37″ / 37″ |
| BOTTOM GUIDE VARCO 350/500TON – 13.5/8″ |
| SLIP ASSY VARCO 500TON – 2.3/8′ – 10.3/4 |
| SLIP ASSY VARCO 500TON – 13.3/8″ |
| SPIDER VARCO PS21 |
| SPIDER VARCO PS21 BODY 500T – 14 |
| OILFIELD EQUIPMENT- THIMBLE SST 3/8 IN ROPE PH100 VARCO (P/N : 30126622) |
| OILFIELD EQUIPMENT- CAPSCREW SOCKET HEAD VARCO (P/N : 50114-22-CD) |
| OILFIELD EQUIPMENT- SPRING VARCO DIE DUAL VALVE FOR VARCO PH 60 (P/N ; 79179) |
| OILFIELD EQUIPMENT- FITTING GREASE STRAIGHT VARCO (P/N : 53201) |
| OILFIELD EQUIPMENT- WASHER FLAT VARCO (P/N : 50816-N-S) |
| OILFIELD EQUIPMENT- NUT VARCO HEX SLOWTTED 1 INCH UNC CAD PLATED FOR PH 60 (P/N ; 50516C) |
| OILFIELD EQUIPMENT- CAPSCREW HEX HEAD 1 IN-8 X 6 IN VARCO (P/N : 117989) |
| OILFIELD EQUIPMENT- WRENCH SOCKET HEX.88 VARCO (P/N : 77408) |
| OILFIELD EQUIPMENT- REPAIR KIT OPERATIONAL COMPLETE VARCO (P/N ; 30177550-2) |
| OILFIELD EQUIPMENT- WASHER LOCK REGULAR VARCO (P/N : 50914-C) |
| OILFIELD EQUIPMENT- CRANK ASSEMBLY EXTERNAL VARCO (P/N : 30173893) |
| OILFIELD EQUIPMENT- ELEMENT FILTER 25 MICRON SCHROEDER VARCO (P/N : 30175768-1) |
| OILFIELD EQUIPMENT- FILTER & O-RING KIT GEAR OIL VARCO (P/N : 30111013-KIT) |
| OILFIELD EQUIPMENT- SEAL ROD REPAIR KIT CHECK VALVE ABD VARCO (P/N: 30152239-113 ) |
| OILFIELD EQUIPMENT- SEAL ROD REPAIR KIT ABD-2 VARCO (P/N: 30152239-112 ) |
| OILFIELD EQUIPMENT- WASHER LOCK VARCO 107052 |
| OILFIELD EQUIPMENT- ELEMENT CONNECTOR FILTER VARCO (P/N : 30173422-15) |
| OILFIELD EQUIPMENT- HOSE ASSEMBLY VARCO (P/N : 980268) |
| OILFIELD EQUIPMENT- SHELL ACTUATOR PH-100 VARCO (P/N : 30125259-500) |
| OILFIELD EQUIPMENT- CONNECTOR O-RING BOSS/37 VARCO (P/N : 56529-6-6S) |
| OILFIELD EQUIPMENT- CONNECTOR VARCO (P/N : 56501-8-6-S) |
| OILFIELD EQUIPMENT- CONNECTOR EXTENSION PIPE 37 DEGREE VARCO (P/N : 56501-6-6-S) |
| OILFIELD EQUIPMENT- CONNECTOR VARCO (P/N : 56501-4-6-S) |
| OILFIELD EQUIPMENT- O-RING KIT VARCO (P/N : 30111013-4) |
| OILFIELD EQUIPMENT- HOSE ASSEMBLY FOR CENTERING DEVICE VARCO (P/N : 980269) |
| OILFIELD EQUIPMENT- O-RING VARCO (P/N : 30156633-10) |
| OILFIELD EQUIPMENT – ADAPTER BULKHEAD VARCO (P/N ; 56558-4-6S) |
| OILFIELD EQUIPMENT- NUT HEX SOKTTED UNC-2B VARCO (P/N : 50508-C) |
| OILFIELD EQUIPMENT- CAPSCREW SOCKET HEAD UNC VARCO (P/N : 50108-20-C) |
| HANDLE, RIGHT & LEFT END SEGMENT, MAKE: VARCO/BJ |
| OILFIELD EQUIPMENT- GATE CLAMP CYLINDER MACH PH100VARCO |
| Element, Varco, 82749,filter,tds(parker 932633Q) – USA |
| OILWELL rig123.net’ target=’_blank’>DRILLING rig123.net’ target=’_blank’>RIG SPARES : CLIP WIRE ROPE .375 IN PH100 VARCO (P/N 30125629) |
| OILWELL DRILLING RIG SPARES : SEAL PISTON VARCO (P/N 72219) |
| OILWELL DRILLING RIG SPARES : SEAL ROD VARCO (P/N 72220) |
| OILWELL DRILLING RIG SPARES : WIPER ROD VARCO (P/N 72221) |
| OILWELL DRILLING RIG SPARES : VALVE DIRECTIONAL CONTROL PLS5/MHH VARCO (P/N 110538-R4) |
| OILWELL DRILLING RIG SPARES : CYLINDER LIFT HYDRAULIC PH100 VARCO (P/N 125799) |
| OILWELL DRILLING RIG SPARES : CYLINDER VARCO FOR 5.0 IN COUNTER BALANCE (P/N 94764) |
| OILWELL DRILLING RIG SPARES : CABLE LIFT ASSEMBLY PH100 VARCO (P/N 30125583) |
| OILWELL DRILLING RIG SPARES : CARTIDGE VALVE COUNTER BALANCE VARCO (P/N 109655-10) |
| OILWELL DRILLING RIG SPARES : CARTIDGE VALVE COUNTER BALANCE VARCO (P/N 109655-13) |
| OILWELL DRILLING RIG SPARES :CRANK ASSEMBLY EXTERNAL VARCO (P/N 30173893) |
| OILWELL DRILLING RIG SPARES : VALVE TDS9S CART FLOW CTL VARCO (P/N 109302-130NC) |
| OILWELL DRILLING RIG SPARES : REPAIR KIT COMPLETE VARCO (P/N 30177549-2) |
| Fitting,Varco,103431212,hose,3/4 in JIC 37 deg male – USA |
| FILTER, OIL, KIT, FOR GEAR OIL, CONSISTING OF 60 MICRON FILTER AND O-RING, FOR USE WITH TOP DRIVE LUBE OIL SYSTEM, VARCO |
| OILFIELD EQUIPMENT-VARCO BJ CARTRIDGE (94518-23HN) |
| OILFIELD EQUIPMENT-VARCO BJ O RING (51300-240-B) |
| OILFIELD EQUIPMENT-VARCO BJ REDUCER, INT. 37?/37? (56517-6-4-S) |
| HOUSING, FABRICATION, FOR THULE SHALE SHAKERS MODEL # VSM300, SERIAL # 300198, BRANDT/VARCO P/N 300/01/002 (OILWELL EQUI |
| ASSEMBLY,HOSE,FOR VARCO MODLE ST-80 IRON ROUGHNECK,VARCO P/N 59547P29X040(OILWELL EQUIPMENT) |
| OIL WELL SUPPLIES : PART NO: 51300-446-B, O-RING, SEALING,FOR VARCO TOPDRIVE TDS-4 APPLICATION (QTY: 2 NOS) |
| OILWELL EQUIPMENT NUT,ROD TIE FOR LIFT CYLINDER,SSW-40 SPINNING WRENCH,VARCO P/N 75341-2.C.O.NETHERLANDS |
| OIL WELL SPARES. ASSEMBLY, LINK TILT, FOR TDS 4S, 650 TONS,VARCO P/N 74587-5(SERIAL NUMBER TSD4SK26R212) |
| KEY 1.250 VARCO (P/N 30151225-10) (OILWELL EQUIPMENT) |
| PACKING KIT WASHPIPE 4 STD VARCO (P/N 30123440-PK)(OILWELL EQUIPMENT) |
| BREATHER VARCO (P/N 30172438-101)(OILWELL EQUIPMENT) |
| ABSOLUTE ENDCODER SEE TEXT VARCO (P/N 30155842-040-HE)(OILWELL EQUIPMENT) |
| TENSION ASSEMBLY ARM BELT VARCO 30176887(OILWELL EQUIPMENT) |
| SHEAVE 30T ALUMINUM AHS-10Q VARCO (P/N 301765572) (OILWELL EQUIPMENT) |
| DIE-PIPE,VARCO,81788,F/TDS TORQUE WRENCH PIPE HANDLER AN IRON ROUGHNECK – USA |
| FOR VARCO,TDS,MODEL 11 SA,UPPER IBOP,PH50 ASSY,6-5/8 X 6-5/8,C/W CERT (OILFIELD EQUIPMENTS FOR TDS PARTS) (1 NOS) |
| VARCO 2-7/8″ – 4-1/8″ MP-S Safety |
| USED OILWELL EQUIPMENT – B TYPE VARCO HAND SLIPS W/14 SEGMENTS |
| USED OILWELL EQUIPMENT – 10-3/4″ SIDE DOOR ELEVATOR VARCO BJ TYPE SLX -150 TON |
| USED OILWELL EQUIPMENT – 8″ DRILL COLLAR SAFETY CLAMP W/10 SEGMENT VARCO TYPE |
| USED OILWELL EQUIPMENT – 8″ DRILL COLLAR SAFETY CLAMP W/10 SEGMENT VARCO TYPE |
| 2 NUM KIT, DIE HOLDER FOR ST80-H VARCO SPIN TO |
| WASHER, FLAT, 3/4″, CADMIUM PLATED STEEL, VARCO SHAFFER P/N 8020408 |
| IDLER, AR3200 SHAFT ASSY, VARCO P/N – 87774 |
| OILWELL DRILLING RIG SPARES : BEARING ANGULAR CONTACT VARCO (P/N 30153388) |
| LOCKWASHER, TAB, 0.40, VARCO P/N 87052 |
| GREASE, WATERPROOF, 35LB PER PAIL, VARCO P/N 212410(MADE OF GREASE)(2 PAIL) |
| OILFIELD EQUIPMENT PLUG, (PSDS) DWG NO 92659 FOR VARCO 500 TON PIPE HANDLER |
| OILFIELD EQUIPMENT KIT, REPAIR FOR VARCO TOP DRIVE LIFT CYL |
| OILFIELD EQUIPMENT CAP, DUST, AIR FILTER, FOR IBOP ACTUATOR ARMS, VARCO P/N 55915-6 |
| PIN, COTTER 3/16″ X 2″ STL SAE J487 ZINC PLATED FOR CASING SLIPS, VARCO |
| SLIP ASSEMBLY 3-1/2 YC-ELEV W/CERT VARCO 34931Y (OILWELL EQUIPMENT) |
| GUIDES PLATES YC 3-1/2 VARCO 26827-1 (OILWELL EQUIPMENT) |
| OILWELL DRILLING RIG SPARES : 56519-6-6-S Varco BJ Elbow, O-Ring Boss |
| OILFIELD EQUIPMENT KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: |
| OIL WELL SPARES. BUTTON, CIRCULAR, 20″ (SET/312), VARCO BJP/N 2631-312 (01 PC) |
| OILFIELD EQUIPMENT FILTER, TDS, VARCO P/N 75937 |
| LATCH, ASSEMBLY FINGER, VARCO P/N 123723-1 |
| EXCHANGER, HEAT, VARCO P/N 109411 |
| OILFIELD EQUIPMENT- SHAFT COMPOUND GEAR PH-100 VARCO |
| OILFIELD EQUIPMENT- GEAR BULL TDS-8S VARCO |
| OIL WELL SPARES. KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ |
| 3 NUM KIT, DIE LOWER FOR VARCO ST80-H SPIN TORQ C/O: THE FOLLOWING ITEMS 2-EA 30160382 DIE LOWER DOVETAIL 5-EA 50108-14- |
| 2 NUM BUSHING, WEAR FOR VARCO ELEVATOR HGG 200062Y |
| OIL WELL SUPPLIES: 56519-8-6-S VARCO BJ ELBOW O RING BOSS 37 (QTY: 1 NOS) |
| OIL WELL SUPPLIES: 56519-6-6-S VARCO BJ ELBOW O-RING BOSS (QTY: 3 NOS) |
| OIL WELL SUPPLIES: 56519-6-6-S VARCO BJ ELBOW O-RING BOSS (QTY: 2 NOS) |
| OIL WELL SUPPLIES: 94518-23HN VARCO BJ CARTRIDGE (QTY: 4 NOS) |
| OIL WELL SUPPLIES: 56529-6-6S VARCO BJ CONNECTOR O-RING BOSS 37′ (QTY: 5 NOS) |
| OIL WELL SUPPLIES: 56519-8-6-S VARCO BJ ELBOW O-RING BOSS 37′ (QTY: 1 NOS) |
| OIL WELL SUPPLIES: 56547-16-S VARCO BJ LOCK NUT BULCK HEAD (QTY: 1 NOS) |
| OIL WELL SUPPLIES: 93547-2B75N VARCO BJ PILOT TO OPEN CHECK VALVE (QTY: 2 NOS) |
| OIL WELL SUPPLIES: 56517-6-4-S VARCO BJ REDUCER INT 37’/37′ (QTY: 1 NOS) |
| OIL WELL SUPPLIES: 5651-6-6-S VARCO BJ ELBOW O-RING BOSS (QTY: 18 NOS) |
| OIL WELL SUPPLIES: 56547-16-S VARCO BJ LOCK NUT BULCK HEAD (QTY: 3 NOS) |
| OIL WELL SUPPLIES: 94817-3AN VARCO PRESSURE REDUCING CATRIDGE (QTY: 1 NOS) |
| OIL WELL SUPPLIES: 56529-6-6-S VARCO BJ CONNECTOR O-RING BOSS 37″ (QTY: 1 NOS) |
| VARCO INSERT FOR BOWL NO.1 FOR 13-3/8″ AND 11-3/4″ CASING MPCH MASTER BUSHING : SPEC NO.OE51101-39 |
| VARCO INSERT FOR BOWL NO.2 : SPEC NO.OE51101-38 |
| NUT, LOCK, COMMERCIAL THIN TYPE, VARCO BJ P/N 944422-6 |
| OILFIELD EQUIPMENT KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ C/O: FOLLOWING ITEMS 2 EA. 30160380 DIE UPPER DOVETAIL, 5 E |
| KIT, SEAL, SPARE PART 18-10M SBOP, VARCO P/N 157615+20 |
| DVC, 3 POSITION 35 GPM UL WITH CK, VARCO |
| PIN, RETAINING, VARCO |
| PIN, RETAINING, VARCO |
| KIT, REPAIR, VALVE, FOR RISER TENSIONER, VARCO SHAFFER |
| MASTER BUSHING, REBUILT OEM VARCO MPCH, NO.3 BOV (P/N:6600-2-REF) |
| WASHER, LOCK, VARCO |
| 2 NUM KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ |
| OILWELL DRILLING RIG SPARES : MANIFLOD ST80 VARCO 30154909-2 |
| OILWELL DRILLING RIG SPARES : MANIFLOD LOAD HOLD VARCO 30170587-602 |
| OILWELL DRILLING RIG SPARES : V15519 VARCO SDXL 5-1/2″ Rotary Slip complete with Inserts(was 3717) “SDXL type hand slips |
| OILFIELD EQUIPMENT CLAMP, SAFETY 8 IN TO 9-1/4 IN TYPE MP-R VARCO |
| OILFIELD EQUIPMENT KIT, DIE UPPER FOR VARCO ST80-H SPIN TORQ C/O: FOLLOWING ITEMS 2 EA. 30160380 DIE UPPER DOVETAIL, 5 E |
| ASSEMBLY, HOSE, FOR VARCO MODLE ST-80 IRON ROUGHNECK, VARCO P/N 59547P29X040 |
| CONVERTER, FREQUENCY/VOLTAGE, VARCO P/N KFU8.UFCEX1 |
| ASSEMBLY, MALE HOT STAB, VARCO |
| FILTER, SUB-PLATE MOUNTED, 1/2 IN NOMINAL, 3 MICRON, 316SS, VARCO |
| O-RING, BOP CONTROL, 1″, SAE, FLANGE, VARCO |
| MANIFOLD-PIPE, VARCO, 1197362, PIPE HANDLER MACH, ALUM |
| KIT-SEAL, VARCO, 30160685SK, RH TORQUE CYLINDER ASSY : USA |
| HANDLE, RIGHT & LEFT END SEGMENT, MAKE: VARCO/BJ |
| HANDLE, RIGHT, MAKE:VARCO/BJ |
