Handlingtoolsparts3

REPLACEMENT PARTS FOR “A-MP” TYPE SAFETY CLAMPS

AOT# ITEM # DESCRIPTION CLAMP TYPE REF. # QTY. WT.
31-335 1 LINK COMPLETE MP-S ONLY 3335 AR 9.00
31-319 1 LINK COMPLETE ALL EXCEPT MP-S 3319 AR 8.75
31-307 2 PIN, FOR LINK (w/COTTER) ALL 3307 AR .75
31-306 3 LINK (W/COTTER) ALL 3306 AR 4.50
31-325 4 CARRIER ASSY. (w/DIE) MP-S ONLY 3325 AR 3.00
31-324 4 CARRIER ASSY. (w/DIE) ALL EXCEPT MP-S 3324 AR 2.50
31-333 5 DIE (w/COTTER) MP-S ONLY 3333 AR 1.50
31-310 5 DIE (w/COTTER) ALL EXCEPT MP-S 3310 AR 1.00
31-309 6 CARRIER (LESS DIE) ALL 3309 AR 2.50
31-311 7 SPRING ALL 3311 AR .10
31-418 8 ROLL PIN (DIE KEEPER) ALL 51604-18 AR .10
31-528 9 COTTER PIN (f/CARRIER) ALL 51405-28 AR .18
31-318 10 SIDE BAR LINKS (PAIR) ALL 3318 AR 2.50
31-304 11 LATCH LINK ALL EXCEPT MP-XL 3304 1 7.00
31-321 11 LATCH LINK MP-XL ONLY 3321 1 14.00
31-308 12 PIN FOR SCREW, (w/COTTER ALL 3308 1 .50
31-315 13 BUSHING F/SCREW PIN ALL 3315 1 .33
31-510 14 COTTER F/LINK PIN ALL 51405-10 AR .08
31-302 15 SCREW ALL 3302 1 5.25
31-714 16 THRUST WASHER ALL 2714 1 1.00
31-303 17 NUT F/SCREW ALL 3303 1 3.50
31-305 18 HANDLE MP-S,MP-R, & MP-M 3305 2 4.50
31-305 18 HANDLE MP-L & MP-XL 3305 4 4.50
31-316 N/P HOLD DOWN LUG SEE ITEM 18 3316 OPT. 5.75
31-317 19 LIFTING EYE SEE ITEM 18 3317 OPT. 4.75
31-320 20 NUT WRENCH ALL 3320 1 5.00

RECOMMENDED SPARE PARTS FOR 1 YEAR FOR “A-MP” TYPE CLAMPS

AOT # DESCRIPTION A-MP-S A-MP-R A-MP-M A-MP-L A-MP-XL
31-008 DIE W/COTTER 4
31-310 DIE W/COTTER 6 8 10 13
31-311 SPRING 9 12 17 20 26
31-528 PIN W/COTTER 4 6 8 10 13
31-418 ROLL PIN 9 12 17 20 26

Insert Bowl No. 1

AOT INSERT BOWLS

Insert Bowl No. 2

Insert Bowl No. 3

AOT# DESCRIPTION MB = Master Bushings REFERENCE # WT.
34-101 INSERT BOWL NO. 1 FOR 13 3/8” – 11 3/4” CASING (23” – 27 1/2” Master Bushings) 1903 326
34-102 INSERT BOWL NO. 2 FOR 10 3/4” – 9 5/8” CASING (23” – 27” Master Bushings) 1904 460
34-103 INSERT BOWL NO. 3 FOR 8 5/8” & SMALLER (23” – 27 1/2” Master Bushings) 1810 664
34-301 INSERT BOWL NO. 1 FOR 13 3/8” – 11 3/4” CASING (37 1/2” – 49 1/2” Master Bushings) 6610 335
34-302 INSERT BOWL NO. 2 FOR 10 3/4” – 9 5/8” CASING (37 1/2” – 49 1/2” Master Bushings) 6609 470
34-303 INSERT BOWL NO. 3 FOR 8 5/8” & SMALLER (37 1/2” – 49 1/2” Master Bushings) 6608 625

AOT CASING BUSHINGS

AOT# DESCRIPTION REFERENCE # WT.
34-401 20” CB BUSHING FOR ALL 27 1/2” API ROTARY TABLES (SPLIT) 6695 713
34-418 20” CUL BUSHING FOR ALL 27 1/2” API ROTARY TABLES (SOLID) 3103 975
34-405 20” CB BUSHING FOR 37 1/2” – 49 1/2” NATIONAL ROTARY TABLES 10187 1600
34-411 24” CB BUSHING FOR 37 1/2” – 49 1/2” NATIONAL ROTARY TABLES 11253 1200
34-412 26” CB BUSHING FOR 37 1/2” – 49 1/2” NATIONAL ROTARY TABLES 16454 1100
34-404 30” CB BUSHING FOR 37 1/2” – 49 1/2” NATIONAL ROTARY TABLES 11763 1100
34-406 20” CB BUSHING FOR 37 1/2” – 49 1/2” OILWELL, WIRTH, & GARDNER-DENVER 10188 1670
34-422 24” CB BUSHING FOR 37 1/2” – 49 1/2” OILWELL, WIRTH, & GARDNER-DENVER 6170 1400
34-421 26” CB BUSHING FOR 37 1/2” – 49 1/2” OILWELL, WIRTH, & GARDNER-DENVER 6170-26 1250
34-420 30” CB BUSHING FOR 37 1/2” – 49 1/2” OILWELL, WIRTH, & GARDNER-DENVER 12093 1150
34-407 20” CB BUSHING FOR 37 1/2” – 49 1/2” IDECO ROTARY TABLES 10189 1670
34-424 26” CB BUSHING FOR 37 1/2” – 49 1/2” IDECO ROTARY TABLES N/A 1160
34-423 30” CB BUSHING FOR 37 /” – 49 /” IDECO ROTARY TABLES 12092 MTO 1100
34-408 20” CB BUSHING FOR 37 1/2” – 49 1/2” EMSCO (S/N 49 AND UP) 11553 1600
34-419 30” CB BUSHING F/37 1/2” – 49 1/2” EMSCO ROTARY TABLE (S/N 49 AND UP) 11633 1160

AOT REDUCING BUSHINGS FOR CB & CUL

AOT# DESCRIPTION REFERENCE # WT.
34-409 20” X 16” REDUCING BUSHING FOR CB BUSHING 6127 570
34-410 13 3/8” – 11 3/4” NO. 1 INSERT BOWL FOR CB BUSHING 6126 900
34-416 10 3/4” – 9 5/8” NO. 2 INSERT BOWL FOR CB BUSHING 6114 252
34-417 20” X 16” REDUCING BUSHING FOR CUL BUSHING 3104 562
34-413 13 3/8” – 11 3/4” NO. 1 INSERT BOWL FOR CUL BUSHING 3105 846
34-414 10 3/4” – 9 5/8” NO. 2 INSERT BOWL FOR CUL BUSHING 1902 242
34-415 8 5/8” & SMALLER NO. 3 INSERT BOWL FOR CUL BUSHING 1809 464

ACCESSORIES

AOT# DESCRIPTION REFERENCE # WT.
34-315 LIFTING SLINGS (2 HOOK) 1021 40
34-316 LIFTING SLINGS (4 HOOK) 6699 150

“4-KSM” MEDIUM DUTY KELLY BUSHING

The AOT 4 KSM Kelly Bushing is a medium duty square drive bushing. It will accommodate 2 1/2” – 5 1/4”

square

KELLY SIZE “4 KSM” COMPLETE WT. REF NO.
TYPE W/WRENCH & WIPER
3” HEX 33-230 860 1402-30
31/2” HEX 33-235 860 1402-35
41/4” HEX 33-242 860 1402-42
2 1/2” SQUARE 33-125 870 1401-25
3” SQUARE 33-130 870 1401-30
3 1/2′ SQUARE 33-135 870 1401-35
4 1/4” SQUARE 33-142 870 1401-42
5 1/4” SQUARE 33-152 870 1401-52

REPLACEMENT PARTS FOR “4-KSM” KELLY BUSHING

DESCRIPTION AOT# QTY. WT. SPARES REF.#
BODY ASSY. COMP. LESS ROLLER ASSY. 33-403 1 615.00 1403
STUD 33-414 4 5.00 1414
HOLDDOWN BOLT NUT 33-208 4 1.75 1208
HOLDDOWN BOLT LOCKWASHER 33-924 4 .25 50924
WRENCH 32-210 1 8.00 1210
WIPER RET. RING 33-417 1 8.75 1417
SCREWS f/ RING 33-106 8 .16 50106-8-SD
ROLLER PIN w/
LUBE FITTING 33-411 4 8.00 4 1411
ROLLER BEARING 33-412 4 3.00 4 1412
THRUST WASHER 33-413 8 2.00 8 1413
SLEEVE BEARING 33-422 4 1.00 4 1422

ROLLERS & WIPERS FOR “4-KSM” KELLY BUSHINGS

KELLY SIZE TYPE ROLLER ASSY. WT. ROLLERS ONLY WT. V ROLLER FLAT ROLLER
3” HEX 33-450 235 33-738 175 33-438 33-437
3 1/2” HEX 33-451 215 33-940 160 33-440 33-439
4 1/4” HEX 33-452 190 33-294 135 33-442 33-441
2 1/2” SQUARE 33-445 245 33-304 185 33-430
3” SQUARE 33-446 230 33-314 170 33-431
3 1/2” SQUARE 33-447 205 33-324 145 33-432
4 1/4” SQUARE 33-448 175 33-334 115 33-433
5 1/4” SQUARE 33-449 135 33-344 75 33-434

^RECOMMENDED SPARES INCLUDE ONE SET OF ROLLERS FOR EACH SIZE TO BE RUN
^RECOMMENDED SPARES INCLUDE TWO WIPER RUBBERS FOR EACH SIZE KELLY TO BE RUN

ROLLERS & WIPERS FOR “27-HPD” & “HSD” KELLY BUSHINGS

KELLY SIZE TYPE ROLLER ASSY. WT. ROLLERS ONLY WT. V ROLLER FLAT ROLLER
3” HEX 32-667 615 32-839 420 32-339 32-338
31/2” HEX 32-668 585 32-041 390 32-341 32-340
41/4” HEX 32-669 535 33-243 340 32-343 32-342
5” SPEC HEX 32-671 485 32-788 295 32-388 32-387
51/4” HEX 32-672 475 32-445 290 32-345 32-329
6” HEX 32-673 415 32-647 220 32-347 32-330
3” SQUARE 32-674 590 32-314 400 32-331
3 1/2” SQUARE 32-661 565 33-324 370 32-332
4 1/4” SQUARE 32-662 515 32-334 320 32-333
5 1/4” SQUARE 32-665 435 32-344 245 32-335
6” SQUARE 32-666 375 32-354 180 32-336

* RECOMMENDED SPARES INCLUDE ONE SET OF ROLLERS FOR EACH SIZE TO BE RUN
^RECOMMENDED SPARES INCLUDE TWO WIPER RUBBERS FOR EACH SIZE OF KELLY TO BE RUN

“27-HPD” PIN DRIVE & “HSD” SQUARE DRIVE KELLY BUSHINGS

The AOTHSand HP series of Kelly Drive Bushings are designed for rugged high torque, high speed drilling
operations They will accomodate 3” Hex thru 6” Square Kellys. The 27-HPD bushing fits 22” – 49 1/2” pin drive
master bushings. The HSD bushing fits square drive master bushings.

KELLY SIZE / TYPE “27-HPD” COMPLETE w/WRENCH & WIPER PART NO. WT. REF NO. “HSD” PART NO. COMPLETE WT. REF NO.
3” HEX 32-030 1445 3650-30 32-530 1425 3635-30
3 1/2” HEX 32-035 1445 3650-35 32-535 1425 3635-35
4 1/4” HEX 32-042 1445 3650-42 32-542 1425 3635-42
5” HEX 32-050 1445 3650-50 32-550 1425 3635-50
51/4” HEX 32-052 1445 3650-52 32-552 1425 3635-52
6” HEX 32-060 1445 3650-60 32-560 1425 3635-60
3” SQUARE 32-130 1500 3651-30 32-630 1475 3636-30
3 1/2” SQUARE 32-135 1500 3651-35 32-635 1475 3636-35
4 1/4” SQUARE 32-142 1500 3651-42 32-642 1475 3636-42
5 1/4” SQUARE 32-152 1500 3651-52 32-652 1475 3636-52
6” SQUARE 32-160 1500 3651-60 32-660 1475 3636-60

REPLACEMENT PARTS FOR “27-HPD” & “HSD” KELLY BUSHINGS

DESCRIPTION 27-HPD REF. NO. HSD REF NO.
QUANTITY PART NO. WT. PART NO. WT.
BODY ASSY. COMPLETE 1 32-653 990. 3653 32-637 900. 3637
LESS ROLLER ASSY.
HOLDDOWN BOLT w/ 4 32-501 7.00 13501 32-501 7.00 13501
LOCKSCREW & WASHER
HOLDDOWN BOLT 4 32-500 .23 50110-8-S 32-500 .23 50110-8-S
LOCKSCREW
HOLDDOWN BOLT 4 32-510 .08 511110 32-510 .08 51110
LOCKWASHER
HOLDDOWN NUT 4 32-208 1.75 1208 32-208 1.75 1208
LOCKWASHER 4 32-924 .25 50924 32-924 .25 50924
DRIVE PIN 4 32-605 10.00 1605 N/A
DRIVE PIN WASHER 4 32-506 1.00 1506 N/A
WRENCH 1 32-210 8.00 1210 32-210 8.00 1210
WIPER RETAINER RING 1 32-321 3.50 1321 SAME
SCREWS FOR RING 8 32-008 .16 50008-10-S SAME
LOCK ASSY. CONSISTS OF 32-695 3695 •SPARES
RETAINING RING 2 32-017 1017
DRIVE PIN WASHER 2 32-506 1506
ECCEN. PIN, HPD LOCK 2 32-696 3696 2
DRIVE PIN, HPD LOCK 2 32-697 3697
LOCK, HPD 2 32-698 3698 2
* RECOMMENDED SPARES FOR ONE YEAR OPERATION
ROLLER ASSEMBLY PARTS, FOR “27-HPD” & “HSD” KELLY BUSHINGS
DESCRIPTION AOT # •SPARES QTY. WEIGHT REF. NO.
ROLLER BEARING 32-312 4 4 7.00 1312
SLEEVE BEARING 32-326 4 4 2.00 1326
ROLLER PIN w/LUBE
FITTING 32-609 4 4 31.50 3609
THRUST WASHER w/
O-RINGS 32-618 8 8 5.00 3618
DRIVE LOCK PIN f/
THRUSTWASHER 32-613 8 .25 3613
TEMPLATE 32-615 1 .50 3615
LOCK PIN f/
THRUSTWASHER 32-138 8 .20 19138
ID, O-RING THRUSTWASHER 32-233 16 16 .50 51300-233-B
OD, O-RING THRUSTWASHER 32-255 16 16 1.50 51300-255-B

★RECOMMENDED SPARES FOR ONE YEAR OPERATION

AOT TYPE STABBING GUIDE
The Access Rubber Stabbing Guides allow for quicker, easier stabbing and adds protection from stabbing damage. The self-adjusting latch

holds the stabbing guide in place on both new and worn box O.D.,s.

The spring-loaded lever, when triggered, releases the guide for quick removal after stabbing.

STABBING GUIDE COMPLETE

AOT# O.D. SIZE / WEIGHT PER FT. WT.
CONNECTION THREAD TYPE
02-101 3/4” / CS® 1.2# – 1.5# 5.00
02-102 1” / CS® 2.25# 4.50
02-103 11/4” / CS® 3.02# – 3.24# 5.50
02-104 11/2” / CS® 3.64# 5.50
02-105 21/16” / CS® 3.25# 6.50
02-106 2 3/8” / CS® 4.70# 6.00
02-107 2 3/8” / PH-6™ 5.95# 6.00
02-108 2 7/8” / CS® 6.5# 7.00
02-109 2 7/8” / PH-6™ 7.9# 6.50
02-110 2 7/8” / PH-6™ 8.7# (small body) 6.50
02-111 2 7/8” / PH-6™ 8.7# (large body) 11.00
02-112 2 7/8” / 8RD 6.5# (small body) 6.50
02-113 2 7/8” / 8RD 6.5# (large body) 10.50
02-114 31/2” / CS® 9.3# – 10.3# 10.00
02-115 31/2” / PH-6™ 12.95# 9.50
02-116 31/2” / IF 4 3/4”（small body) 9.50
02-117 31/2” / IF 4 3/4”（large body) 12.00
02-118 41/2” / CS® 12.75# 12.00
02-119 41/2” / PH-6™ 15.50# 12.00
02-143 41/2” / XH 61/4” 14.00
02-144 41/2” / IF 61/2” 14.00
02-145 5” / PH-6™ 20.3# 14.00
02-146 51/2” / PH-6™ 23# 14.00

OTHER SIZES AND TYPES OF CONNECTIONS ARE IN STOCK AND AVAILABLE UPON REQUEST.
THERE IS NO CHARGE FOR LABOR ON REPAIRS WHEN USING OUR REPLACEMENT PARTS.
REPLACEMENT PARTS FOR STABBING GUIDE
RUBBER BODIES ONLY

AOT# O.D. SIZE WEIGHT PER FT. WT.
CONNECTION / THREAD TYPE
02-120 3/4” / CS® 1.2# – 1.5# 1.00
02-121 1” / CS® 2.25# 1.00
02-122 11/4” / CS® 3.02# – 3.24# 1.50
02-123 11/2” / CS® 3.64# 1.50
02-124 21/16” / CS® 3.25# 3.00
02-125 2 3/8” / CS® 4.70# 2.50
02-126 2 3/8” / PH-6™ 5.95# 2.50
02-127 2 7/8” / CS® 6.5# 3.00
02-128 2 7/8” / PH-6™ 7.9# 2.50
02-129 2 7/8” / PH-6™ 8.7# (small body) 2.50
02-130 2 7/8” / PH-6™ 8.7# (large body) 6.00
02-131 2 7/8” / 8RD 6.5# (small body) 2.50
02-132 2 7/8” / 8RD 6.5# (large body) 5.50
02-133 31/2” / CS® 9.3# – 10.3# 5.50
02-134 31/2” / PH-6™ 12.95# 4.50
02-135 31/2” / IF 4 3/4” (small body) 4.00
02-136 31/2” / IF 4 3/4” (large body) 7.50
02-137 41/2” / CS® 12.75# 7.50
02-138 41/2” / PH-6™ 15.50# 7.50
02-139 41/2” / XH 61/4” 9.00
02-140 41/2” / IF 61/2” 9.00
02-141 5” / PH-6™ 20.3# 9.00
02-142 51/2” / PH-6™ 23# 9.00

REPLACEMENT PARTS FOR STABBING GUIDES
AOT# ITEM DESCRIPTION WT.
02-150 2 BEARING .05
02-151 3 SPRING .10
02-152 4 HINGE .50
02-153 5 CATCH .45
02-154 6 LATCH .12
02-155 7 HINGE PIN .13
02-156 8 GUIDE PIN .05
02-157 9 CAP SCREW (8) .11
02-158 10 HANDLE 2.00

AOT CASING SCRAPERS

AOT# CASING O.D. CONN. 纽ZE CASING WEIGHT BLADE DIAMETER COLLAPSED EXTENDED SCRAPER WEIGHT
10-085 2 7/8” 1 13/16” WFJ 6.5 2.347 2.597 26#
10-085-1 31/2” 1 13/16” WFJ 9.3 2.797 3.047 24#
10-087 4” 2 3/8” REG. 11.34 3.303 3.678 50#
10-087-1 41/2” 2 3/8” REG. 9.5-13.5 3.795 4.090 51#
10-110-1 4 1/2” & 5” 23# 2 3/8” REG. 9.5-13.5 3.795 4.280 70#
10-110-2 5” 2 3/8” REG. 11.5-18 4.151 4.636 72#
10-113 51/2” 2 7/8” REG. 13-23 4.545 5.233 97#
10-113-4 5 3/4” 2 7/8” REG. 14-23 4.960 5.648 98#
10-117-3 6 5/8” 3 1/2” REG. 17-32 5.550 6.293 150#
10-117 7” 3 1/2” REG. 17-38 5.795 6.538 152#
10-117-1 7 5/8” 3 1/2” REG. 20-39 6.500 7.243 158#
10-117-4 8 5/8” 3 1/2” REG. 24-49 7.386 8.129 162#
10-123-2 9 5/8” 41/2” REG. 29.3-53.3 8.379 9.254 354#
10-123-3 10 3/4” 41/2” REG. 32.75 – 55.5 9.604 10.479 360#
10-123-5 11 3/4” 41/2” REG. 38-60 10.616 11.491 375#
10-123-6 13 3/8” 41/2” REG. 48-72 12-191 13.066 405#
10-127-2 10 3/4” 6 5/8” REG. 32.75-55.5 9.604 10.479 480#
10-127-3 11 3/4” 6 5/8” REG. 38-60 10.616 11.491 495#
10-127 13 3/8” 6 5/8” REG. 48-72 12.191 13.066 545#
10-128 16” 7 5/8” REG. 65-109 14.500 15.697 1100#
10-128-1 20” 7 5/8” REG. 94-169 18.188 19.415 1200#

SCRAPER BLADES

AOT # FOR SCRAPER SIZE CSG. WT. WT. PER SET
10-135 10-085 2 7/8” 6.5# 6.00
10-137 10-085-1 31/2” 9.3# 6.70
10-137-1 10-087 4” 11.34# 6.95
10-137-2 10-087-1 41/2” 9.5# – 13.5# 7.45
10-140 10-110-1 4 1/2” & 5” 23# 9.5# – 13.5# 11.00
10-141 10-110-2 5” 11.5# – 18# 14.00
10-143 10-113 51/2” 13# – 23# 15.00
10-145 10-113-4 5 3/4” 14# – 23# 16.00
10-146 10-117-3 6 5/8” 17# – 32# 23.00
10-147 10-117 7” 17# – 38# 24.00
10-148 10-117-1 7 5/8” 20# – 39# 34.00
10-149 10-117-4 8 5/8” 24# – 49# 46.00
10-153 10-123-2 9 5/8” 29.3# – 53.3# 78.00
10-154 10-123-3 10 3/4” 32.75# – 55.5# 90.00
10-155 10-123-5 11 3/4” 38# – 60# 93.00
10-156 10-123-6 13 3/8” 48# – 72# 110.00
10-157-2 10-127-2 10 3/4” 32.75# – 55.5# 110.00
10-157-3 10-127-3 11 3/4” 38# – 60# 130.00
10-157 10-127 13 3/8” 48# – 72# 160.00
10-157-4 N/A 16” 65# – 109# 195.00
10-158 10-128 16” 65# – 109# 180.00
10-159 10-128-1 20” 94# – 169# 210.00
CENTER RING ASSEMBLIES
AOT# SCRAPER BODY WT.
10-163 10-085 2 7/8” & 3 1/2” 1.75
10-164 10-087 4” & 4 1/2” 2.00
10-165 10-110 4 1/2” & 5” 3.00
10-166 10-113 5 1/2” & 5 3/4” 4.00
10-167 10-117 6 5/8”-8 5/8” 7.00
10-168 10-123 9 5/8”-11 3/4” 21.00
10-169 10-127 10 3/4”-13 3/8” 30.00
10-170 10-128 16” & 20” 55.00

SPRINGS

AOT # SCRAPER BODY QTY. WT.
10-180 10-085 2 7/8”-3 1/2” 6 .125
10-181 10-087 4” & 4 1/2” 18 .125
10-175 10-110 – 10-127 30 .125
10-176 10-127 – 10-128 10 3/4”- 20” 40 .165
SCREWS
AOT # SCRAPER BODY QTY. WT.
10-183 10-085 2 7/8”-3 1/2” 4 .120
10-184 10-087 4”-4 1/2” 4 .120
10-185 10-110 41/2” 4 .130
10-186 10-113 – 10-117 4 .145
10-187 10-123 – 10-127 4 .165
10-188 10-128 16”-20” 4 .200

AOT TYPE “C” TONG COMPLETE

AOT# DESCRIPTION WT.
T30117-2 TYPE “C” TONG COMPLETE W/STANDARD LEVER LESS LUG JAWS (2 3/8” 一 7”） 250.00
T30117-3 TYPE “C” TONG COMPLETE W/SHORT LEVER LESS LUG JAWS (2 3/8” 一 7”） 232.00
T30117 TYPE “C” TONG COMPLETE W/STANDARD LEVER LESS LUG JAWS (7 5/8” – 10 3/4”） 250.00
T30117-1 TYPE “C” TONG COMPLETE W/SHORT LEVER LESS LUG JAWS (7 5/8” 一 10 3/4”） 232.00

NOTE: ADD – ST TO END OF TONG P/N FOR TONG WITH
SAFETY HANDLES & SET-BACK HANGER

HINGE AND LUG JAW ASSEMBLIES FOR TYPE “C” TONG

AOT # ITEM^ DESCRIPTION TORQUE RATING WT.
T30728-1 34 2 3/8 — 3.668 LUG JAW ASSEMBLY 35,000 ft. lbs. 33.00
T30727-1 34 2 7/8 —4 1/4 LUG JAW ASSEMBLY 35,000 ft. lbs. 34.00
T11939-4 34 3 1/2 —5 1/4 LUG JAW ASSEMBLY 35,000 ft. lbs 37.00
T11940-2 34 5 1/4 —7 LUG JAW ASSEMBLY 35,000 ft. lbs 49.00
T11941-1 N/P T – 8 5/8H HINGE & LUG JAW ASSEMBLY 35,000 ft. lbs. 61.00
T11941-2 N/P 7 — 8 5/8 LUG JAW 35,000 ft. lbs 30.00
T11942-1 N/P 7W – 8 5/8” HINGE JAW ASSEMBLY (ONLY) 35,000 ft. lbs. 28.00
T13799-1 N/P 9 5/8 —10 3/4 HINGE &LUG JAW ASSEMBLY 35,000 ft. lbs. 76.00
T13799 N/P 9 5/8 —10 3/4 LUG JAW 35,000 ft. lbs. 39.00
T13798-1 N/P 9 5/8 —10 3/4 HINGE JAWASSEMBLY (ONLY) 35,000 ft. lbs. 36.00

NOTE: ADD – SH TO END OF LUG JAW P/N FOR JAWS W/SAFETY HANDLES

*Lug Jaw Assemblies include Jaw, and any required Tong Dies, Die Retainer Pins, Cotter Pins, & Grease Fittings

REPLACEMENT PARTS FOR TYPE “C” TONG

AOT # ITEM # DESCRIPTION ** SPARES # REQ. WT.
T11516-2 1-7 STANDARD LEVER ASSY. F/TYPE C TONG 1 87.00
T11516 1 STANDARD LEVER ONLY F/TYPE C TONG 1 78.00
T11883-1 1-7 SHORT LEVER ASSY. F/TYPE C TONG 1 63.00
T11883 1 SHORT LEVER ONLY F/TYPE C TONG 1 54.00
T939099-108 2 SAFETY LINE BOLT 1 1 1.00
T50516-C 3 SAFETY LINE BOLT NUT 1 1 .25
T51402-14 4 COTTER PIN 2 1 .10
T26119-1 5 NAME PLATE 1 .10
T53301-4-3 6 NAME PLATE SCREWS 4 .05
T53201 7 GREASE FITTING 2 .05
T11517 8 TONG LINE PIN F/TYPE C TONG 1 1 4.00
T25468 9 TONG LINE PIN RETAINER 2 1 1.00
T13264-1 10-17 HANGER ASSY. F/TYPE C TONG 1 36.25
T13264 10 HANGER ONLY F/TYPE C TONG 1 25.80
T13264-1-SH 10-17 SET BACK HANGERASSY. F/TYPE C TONG 1 44.00
T13264-SH 10 SET BACK HANGER ONLY F/TYPE C TONG 1 33.55
T12586 11 BALANCING SCREW 1 2.75
T939099-596 12 BALANCING SCREW BOLT 1 2.10
T939484-8 13 BALANCING SCREW BOLT NUT 1 .40
T51402-10 14 COTTER PIN 1 .08
T12863 15 SUSPENSION RING 1 1.50
T939168-133 16 HANGER ADJUSTMENT SCREW 1 .75
T939248-8 17 HANGER JAM NUT 2 .25
T30329 18-20 HANGER BOLT ASSY. 1 1 1.50
T939097-516 18 HANGER BOLT 1 1 .40
T940985-8 19 HANGER BOLT NUT 1 .25
T51402-10 20 COTTER PIN 1 .05
T11511-1 21-24,7 LONG JAW ASSY. F/TYPE C TONG 1 64.00
T11511 21 LONG JAW F/TYPE C TONG 1 63.00
T16401-2 22 1/2 X 1 1/4 X 5 TONG DIE 144 AS REQ. .55
T17194 23 TONG DIE RETAINER PIN 24 AS REQ. .03
T51402-6 24 COTTER PIN 36 AS REQ. .01
T11522 25 HINGE PIN NUT 4 4 .35
T51506-8 33 GROOVE PIN F/HINGE PIN NUT 8 8 .05
T11521-1 26 THREADED HINGE PIN 4 4 2.65
T11513-5 27, 22-24 SHORT JAW ASSY. (23/8 —7) 1 31.75
T11513-1 27, 22-24 SHORT JAW ASSY. (7 5/8 — 10 3/4 ) 1 31.75
T11933-1 28,25, & 33 LATCH ASSY. 1 1 17.25
T9561 29 LATCH SPRING 12 2 .10
T11523 30 LEVER HINGE PIN BLOCK 1 3 2.65
T11199 31 DOWELL PIN 4 4 .05
T51402-6 32 COTTER PIN 4 4 .01
T11520-1 NP REMOVABLE HINGE PIN NA 2.75
T20000-SH-2 35 SAFETY HANDLE KIT (fits all AOT tongs) 3 3 3.25

NOTE： ADD -SH TO END OF LONG JAW, LATCH JAW, OR LATCH LUG JAWS FOR SAFETY HANDLES
www.accessoiltools.com

AOT TYPE “B” TONG COMPLETE
AOT# DESCRIPTION WT.
T30114 TYPE 巳 TONG COMPLETE W/STANDARD LEVER LESS LUG JAWS 395.00
T30114-1 TYPE 巳 TONG COMPLETE W/SHORT LEVER LESS LUG JAWS 386.00

NOTE: ADD —ST TO END OF TONG P/N FOR TONG WITH
SAFETY HANDLES & SET-BACK HANGER

LUG JAW ASSEMBLIES FOR TYPE “B” TONG

AOT # ITEM# DESCRIPTION TORQUE RATING WT.
T11765-1 41 3 1/2 -5 LUG JAW ASSEMBLY 55,000 ft. lbs. 30.00
T11196-3 41 4 1/4 -6 3/4 LUG JAW ASSEMBLY 55,000 ft. lbs. 42.00
T11196-2 41 6 5/8 – 一 9 LUG JAW ASSEMBLY 55,000 ft. lbs. 53.00
T11297-1 41 9 — 10 3/4 LUG JAW ASSEMBLY 40,000 ft. lbs. 60.00
T13285-1 41 11 3/4 LUG JAW ASSEMBLY 40,000 ft. lbs. 61.00
T24592-3 41 12 3/4 —13 LUG JAW ASSEMBLY 30,000 ft. lbs. 65.00
T24592-1 41 13 3/8 LUG JAW ASSEMBLY 30,000 ft. lbs. 28.00
NOTE: ADD – SH TO END OF LUG JAW P/N FOR JAWS W/SAFETY HANDLES *Lug Jaw Assemblies include Jaw, and any required Tong Dies, Die Retainer Pins, Cotter Pins, & Grease Fittings
REPLACEMENT PARTS FOR TYPE “B” TONG
AOT # ITEM # DESCRIPTION ** SPARES # REQ. WT.
T12434-2 1-4 STANDARD LEVER ASSY. F/TYPE B TONG 1 133.00
T12434 1 STANDARD LEVER ONLY F/TYPE B TONG 1 124.00
T9568-1 1-4 SHORT LEVER ASSY. F/TYPE B TONG 1 124.00
T9568 1-4 SHORT LEVER ONLY F/TYPE B TONG 1 113.00
T2005682 2 NAME PLATE 1 .10
T53301-4-3 3 NAME PLATE SCREWS 4 .05
T53201 4 GREASE FITTING 2 .05
T9574 5 TONG LINE PIN F/TYPE B TONG 1 1 6.00
T25468 6 TONG LINE PIN RETAINER 2 1 1.00
T26782 7-14 HANGER ASSY. F/TYPE B TONG 1 56.00
T26783 7 HANGER ONLY F/TYPE B TONG 1 47.00
T26782-SH 7-14 SET BACK HANGER ASSY. F/TYPE B TONG 1 64.00
T26783-SH 7 SET BACK HANGER ONLY F/TYPE B TONG 1 55.00
T12586 8 BALANCING SCREW 1 2.75
T939099-596 9 BALANCING SCREW BOLT 1 2.10
T939484-8 10 BALANCING SCREW BOLT NUT 1 .40
T51402-14 11 COTTER PIN 1 .08
T12863 12 SUSPENSION RING 1 1.50
T939168-133 13 HANGER ADJUSTMENT SCREW 1 .75
T939248-8 14 HANGER JAM NUT 2 .25
T939097-556 15 HANGER BOLT 1 1 1 .40
T940985-8 16 HANGER BOLT NUT 1 1 .25
T51402-16 17 COTTER PIN 1 1 .05
T11194-1 18-30 LONG JAW ASSY. F/TYPE B TONG 1 98.00
T11194 18 LONG JAW F/TYPE B TONG 1 95.00
T11139 19 ADJUSTABLE STOP 1 .75
T11144 20 ADJUSTABLE STOP PLUNGER 1 .15
T11192 21 ADJUSTABLE STOP SPRING 1 .15
T11191 22 ADJUSTABLE STOP BOLT 1 .55
T8150 23 ADJUSTABLE STOP BOLT NUT 1 .20
T51402-14 24 COTTER PIN AS REQ. .03
T11228 25 BOOSTER PLUNGER 1 .25
T11229 26 BOOSTER PLUNGER SPRING 1 .25
T940968-6 27 BOOSTER PLUNGER RETAINER PLUG 1 .25
T16402-2 28 1/2 X 1 1/4 X 5 7/8 TONG DIE 144 AS REQ. .75
T17194 29 TONG DIE RETAINER PIN 32 AS REQ. .03
T51402-6 30 COTTER PIN 32 AS REQ. .01
T11142 31 HINGE PIN NUT 5 5 .35
T51506-8 40 GROOVE PIN F/HINGE PIN NUT 10 10 .05
T11197-1 32,28-30 SHORT JAW ASSY. 1 44.00
T11971 32 SHORT JAW ONLY 1 41.00
T11195-2 33, 28-30,4 LATCH JAW ASSY. 1 37.00
T11195 33 LATCH JAW ONLY 1 34.00
T11138-1 34, 31, & 40 LATCH ASSY. 1 1 28.00
T9561 35 LATCH SPRING 12 2 .10
T9572 36 LEVER HINGE PIN BLOCK 1 1 1.75
T11141 37 THREADED HINGE PIN 5 5 4.75
T11199 38 DOWELL PIN 5 5 .05
T51402-6 39 COTTER PIN 5 5 .01
T11140 NP REMOVABLE HINGE PIN NA 4.20
T20000-SH-2 42 SAFETY HANDLE KIT (fits all AOT tongs) 3 3 3.25

NOTE: ADD -SH TO END OF LATCH JAW ASSEMBLY, LATCH OR LATCH LUG JAWS FOR SAFETY HANDLES

**RECOMMENDED SPARE PARTS FOR 1 YEAR

AOT TYPE “HT-65” TONG COMPLETE

AOT# DESCRIPTION WT.
T200540 TYPE HT-65 TONG COMPLETE LESS LUG JAWS 440.00

NOTE: ADD —ST TO END OF TONG P/N FOR TONG WITH
SAFETY HANDLES & SET-BACK HANGER
HINGE & LUG JAW ASSEMBLIES FOR TYPE “HT-65” TONG

AOT # ITEM# DESCRIPTION TORQUE RATING WT.
T200546-1 34 3 1/2 -8 1/4 LUG JAW ASSEMBLY 65,000 ft. lbs. 82.00
T200547-1 34 8—111/4 LUG JAW ASSEMBLY 65,000 ft. lbs. 97.00
T200548 34 11 3/4 —14 3/8 LUG JAW ASSEMBLY 40,000 ft. lbs. 71.00
T200549 34 16 -17 LUG JAW ASSEMBLY 40,000 ft. lbs. 83.00
T200545-1 NP 11 3/4 —17 HINGEJAW ASSEMBLY 40,000 ft. lbs. 56.00

NOTE: ADD – SH TO END OF LUG JAW P/N FOR JAWS W/SAFETY HANDLES

*Lug & Hinge Jaw Assemblies include Jaw, and any required Tong Dies, Die Retainer Pins, Cotter Pins, & Grease Fittings

** Hinge Jaw Assembly required for sizes greater than 11 1/4

REPLACEMENT PARTS FOR TYPE “HT-65” TONG

AOT # ITEM # DESCRIPTION ** SPARES # REQ. WT.
T200541-1 1-8 LEVER ASSY. F/TYPE HT-65 TONG 1 139.00
T200541 1 STANDARD LEVER ONLY F/TYPE HT-65 TONG 1 134.00
T200551 2 NAME PLATE 1 .10
T53301-4-3 3 NAME PLATE SCREWS 4 .05
T53201 4 GREASE FITTING 2 .05
T24529 5 TONG LINE RETAINER 1 1 3.65
T24249 6 TONG LINE RETAINER BOLT 1 1 1.08
T50809-N-C 7 WASHER F/RETAINER BOLT 1 1 .05
T51402-8 8 COTTER PIN 1 1 .04
T200668-2 9-16 HANGER ASSY. F/TYPE HT-65 TONG 1 56.00
T200668 9 HANGER ONLY F/TYPE HT-65 TONG 1 47.00
T200668-2-SH 9-16 SETBACKHANGERASSY. F/TYPE HT-65 TONG 1 64.00
T200668-SH 9 HANGER ONLY F/TYPE HT-65 TONG 1 55.00
T12586 10 BALANCING SCREW 1 2.75
T939099-596 11 BALANCING SCREW BOLT 1 2.1 0
T50512-C 12 BALANCING SCREW BOLT NUT 1 .40
T51402-16 13 COTTER PIN 1 .08
T12863 14 SUSPENSION RING 1 1.50
T939168-133 15 HANGER ADJUSTMENT SCREW 1 .75
T50314-C 16 HANGER JAM NUT 2 .25
T939099-556 17 HANGER BOLT 1 1 1.40
T50512-C 12 HANGER BOLT NUT 1 1 .25
T51402-16 13 COTTER PIN 1 1 .05
T200542-1 18-21 LONG JAW ASSY. F/TYPE HT-65 TONG 1 118.00
T200542 18 LONG JAW F/TYPE HT-65 TONG 1 111.00
T16402-2 19 1/2 X 1 1/4 X 5 7/8 TONG DIE 144 AS REQ. .75
T17194 20 TONG DIE RETAINER PIN 24 AS REQ. .03
T51402-6 21 COTTER PIN 36 AS REQ. .01
T200543-1 22-26, 19-21 SHORT JAW ASSY. F/TYPE HT-65 TONG 1 51.00
T200543 22 SHORT JAW ONLY F/TYPE HT-65 TONG 1 47.00
T25864 23 SHORT HANDLE JAW 1 2.75
T50012-52-C8 24 BOLT 1 .75
T50212-C 25 NUT 1 .35
T50912-C 26 LOCKWASHER 1 .04
T200544-1 27-29, 4 LATCH ASSY. 1 1 36.00
T200544 27 LATCH 1 34.00
T24526 28 LATCH SPING PLUNGER 1 1.75
T24530 29 PLUNGER PIN 1 .25
T24525 30 LATCH SPRING 12 1 .50
T200550 31 HINGE PIN 4,5 4,5 5.00
T24528 32 HINGE PIN NUT 4,5 4,5 .75
T51405-20 33 COTTER PIN 4,5 4,5 .03
T2000-SH-2 35 SAFETY HANDLE KIT (fits all AOT tongs) 4 4 3.25
T24529-TLB-MU 36 TONG LINE BLOCK, MAKE-UP (Right Hand) A/R 31.00
T24529-TLB-BO 36 TONG LINE BLOCK, BREAK OUT (Left Hand) A/R 31.00
*RECOMMENDED SPARE PARTS FOR 1 YEAR

AOT TYPE “HT-100” TONG COMPLETE

AOT# DESCRIPTION WT.
T200071 TYPE HT-100 TONG COMPLETE LESS LUG JAWS 533.00

NOTE: ADD —ST TO END OF TONG P/N FOR TONG WITH
SAFETY HANDLES & SET-BACK HANGER

HINGE & LUG JAW ASSEMBLIES FOR TYPE “HT-100” TONG

AOT # ITEM# DESCRIPTION TORQUE RATING WT.
T200663-1 35 4 -8 1/2 LUG JAW ASSEMBLY 100,000 ft. lbs. 135.00
T200664 35 81/2—12 LUGJAW ASSEMBLY 100,000 ft. lbs. 102.00
T200665 35 12 —15 LUG JAW ASSEMBLY 75,000 ft. lbs. 140.00
T200666 35 15 3/4 LUG JAW ASSEMBLY 100,000 ft. lbs. 162.00
T200667 35 16 —17 LUG JAW ASSEMBLY 60,000 ft. lbs. 140.00
T200662-1 NP 8 1/2 —17 HINGEJAW ASSEMBLY 100,000 ft. lbs. 112.00

NOTE： ADD – SH TO END OF LUG JAW P/N FOR JAWS W/SAFETY HANDLES

*Lug & Hinge Jaw Assemblies include Jaw, and any required Tong Dies, Die Retainer Pins, Cotter Pins, & Grease Fittings

** Hinge Jaw Assembly required for sizes greater than 8 1/2

REPLACEMENT PARTS FOR TYPE “HT-100” TONG

AOT # ITEM # DESCRIPTION ** SPARES # REQ. WT.
T200661-1 1-8 LEVER ASSY. F/TYPE HT-100 TONG 1 191.00
T200661 1 STANDARD LEVER ONLY F/TYPE HT-100 TONG 1 186.00
T200669 2 NAME PLATE 1 .10
T53301-4-3 3 NAME PLATE SCREWS 4 .05
T53201 4 GREASE FITTING 2 .05
T24529 5 TONG LINE RETAINER 1 1 3.65
T24249 6 TONG LINE RETAINER BOLT 1 1 1.08
T50809-N-C 7 WASHER F/RETAINER BOLT 1 1 .05
T51402-8 8 COTTER PIN 1 1 .04
T200668-2 9-16 HANGER ASSY. F/HT-100 & HT-65 TONG 1 56.00
T200668 9 HANGER ONLY F/HT-100 & HT-65 TONG 1 47.00
T200668-2-SH 9-16 SETBACKHANGERASSY. F/HT-100 & HT-65 TONG 1 64.00
T200668-SH 9 SET BACK HANGER ONLY F/HT-100 & HT-65 TONG 1 55.00
T12586 10 BALANCING SCREW 1 2.75
T939099-596 11 BALANCING SCREW BOLT 1 2.10
T50512-C 12 BALANCING SCREW BOLT NUT 1 .40
T51402-16 13 COTTER PIN 1 .08
T12863 14 SUSPENSION RING 1 1.50
T939168-133 15 HANGER ADJUSTMENT SCREW 1 .75
T50314-C 16 HANGER JAM NUT 2 .25
T939099-556 17 HANGER BOLT 1 1 1 .40
T50512-C 12 HANGER BOLT NUT 1 1 .25
T51402-16 13 COTTER PIN 1 1 .05
T200072-1 18-23 LONG JAW ASSY. F/TYPE HT-100 TONG 1 140.00
T200072 18 LONG JAW F/TYPE HT-100 TONG 1 128.00
T16401-2 19 1/2 X 1 1/4 X 5 TONG DIE 144 AS REQ. .75
T17194 20 TONG DIE RETAINER PIN 24 AS REQ. .03
T51402-6 21 COTTER PIN 36 AS REQ. .01
T50012-52-C8 22 BOLT F/LONG JAW 1 1.75
T50212-C 23 NUT 1 .30
T200074-1 24-27, 19-21 SHORT JAW ASSY. F/TYPE HT-100 TONG 1 87.00
T200074 24 SHORT JAW ONLY F/TYPE HT-100 TONG 1 77.00
T939107-516 25 BOLT 1 .75
T50214-C 26 NUT 1 .35
T50912-C 27 LOCKWASHER 1 .04
T200073-1 28-30,4 LATCH ASSY. 1 1 47.00
T200073 28 LATCH 1 43.00
T24526 29 LATCH SPRING PLUNGER 1 1.75
T24530 30 PLUNGER PIN 1 .25
T24525 31 LATCH SPRING 12 1 .50
T200204 32 HINGE PIN 4,5 4,5 5.00
T24528 33 HINGE PIN NUT 4,5 4,5 .75
T51405-20 34 COTTER PIN 4,5 4,5 .03
T20000-SH-2 36 SAFETY HANDLE KIT (fits all AOT tongs) 3 3 3.25
T24529-TLB-MU 37 TONG LINE BLOCK, MAKE-UP (Right Hand) A/R 31.00
T24529-TLB-BO 37 TONG LINE BLOCK, BREAK OUT (Left Hand) A/R 31.00