| AOT MG (100 TON) BOTTLENECK ELEVATOR | |||||
| AOT# | RANGE | SIZE OF LINKS | WT. | ||
| E30157 | 2 3/8” – 3 1/2” | 1 3/4” – 2 3/4” | 308-296 | ||
| REPLACEMENT PARTS FOR MG ELEVATORS | |||||
| AOT# | ITEM # | DESCRIPTION **SPARES | # REQ. | WT. | |
| E26813 | 1 | HINGE PIN | * | 1 | 4.85 |
| E11763 | 2 | LATCH | 1 | 9.25 | |
| E26814 | 3 | LATCH PIN | * | 1 | .50 |
| E11766 | 4 | LATCH SPRING | 2 | 1 | .25 |
| E11581 | 5 | LATCH CAM | 1 | 1 | .75 |
| E11764 | 6 | LATCH LOCK | * | 1 | 3.00 |
| E11759 | 7 | LATCH LOCK PIN | 1 | 1 | .75 |
| E12529 | 8 | DOOR LUG PIN | 1 | .25 | |
| E8156 | 9 | LATCH PIN RETAINER | 1 | 1 | .25 |
| E26817 | 10 | LINK BLOCK | 2 | 3.50 | |
| E8151 | 11 | UPPER LINK BLOCK BOLT, NUT, & COT, | 2 | .45 | |
| E8145-2 | 12 | LOWER LINK BLOCK BOLT & NUT, & COT. | 2 | 2 | .75 |
| E939672-18 | 13 | COTTER PIN | 2 | 3 | .10 |
| E940308-1 | 14 | GREASE FITTING | 1 | .10 | |
| E940308-8 | 15 | GREASE FITTING | 1 | .10 | |
| 1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS | |||||
| AOT RG (150 TON) BOTTLENECK ELEVATOR | |||||
| AOT# | RANGE | SIZE OF LINKS | WT. | ||
| E30156 | 2 3/8” – 3 1/2” | 1 3/4” – 2 3/4” | 308-296 | ||
| REPLACEMENT PARTS FOR RG ELEVATORS | |||||
| AOT# | ITEM # | DESCRIPTION | SPARES | # REQ. | WT. |
| E23569 | 1 | HINGE PIN | * | 1 | 8.13 |
| E23543 | 2 | LATCH | 1 | 1 | 33.00 |
| E23544 | 3 | LATCH PIN | * | 1 | 3.90 |
| E23546 | 4 | LATCH SPRING | 2 | 1 | .75 |
| E23548 | 5 | LATCH SPRING STOP | 1 | 1 | .88 |
| E23729 | 6 | LATCH LOCK | * | 1 | 4.00 |
| E23553 | 7 | LATCH LOCK BOLT | 1 | 1 | 1.13 |
| E939484-8 | 8 | LATCH LOCK BOLT NUT | 1 | 1 | .20 |
| E13188 | 9 | LATCH LOCK SPRING | 2 | 1 | .30 |
| E23547 | 10 | DOOR LUG PIN | 1 | .25 | |
| E8156 | 11 | LATCH PIN RETAINER | 2 | 1 | .25 |
| E9519 | 12 | LINK BLOCK | 2 | 5.50 | |
| E8151 | 13 | UPPER LINK BLOCK BOLT, NUT & COT. 2 | 2 | .50 | |
| E8145-2 | 12 | LOWER LINK BLOCK BOLT & NUT & COT. 2 | 2 | .75 | |
| E939672-18 | 13 | COTTER PIN | 3 | .10 | |
| E940308-1 | 14 | GREASE FITTING | 1 | .10 | |
| 1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS | |||||
| AOT MGG (250 TON) BOTTLENECK ELEVATOR | |||||
| AOT# | RANGE | SIZE OF LINKS | WT. | ||
| E35005 | 3 1/2” – 5 1/2” | 2 1/4” – 3 1/2” | 600.00 | ||
| REPLACEMENT PARTS FOR MGG ELEVATORS | |||||
| AOT# | ITEM # | DESCRIPTION SPARES | # REQ. | WT. | |
| E34908 | 1 | HINGE PIN | * | 1 | 15.50 |
| E34906 | 2 | LATCH | 1 | 57.00 | |
| E34907 | 3 | LATCH PIN | * | 1 | 7.31 |
| E34909 | 4 | LATCH SPRING | 2 | 1 | 2.50 |
| E13185 | 5 | LATCH SPRING STOP | 1 | 1 | .94 |
| E13152 | 6 | LATCH LOCK | * | 1 | 4.00 |
| E15101 | 7 | LATCH LOCK BOLT | 2 | 1 | 1.30 |
| E939484-8 | 8 | LATCH LOCK BOLT NUT | 2 | 1 | .20 |
| E13188 | 9 | LATCH LOCK SPRING | 2 | 1 | .30 |
| E13190 | 10 | DOOR LUG PIN | 1 | .32 | |
| E34911 | 11 | LATCH PIN RETAINER | 2 | 1 | .13 |
| E12732 | n/p | DOOR CATCH ARM | 1 | 1.50 | |
| E12916 | n/p | DOOR CATCH ARM PIN | 1 | .13 | |
| E9561 | n/p | DOOR CATCH SPRING | * | 1 | .13 |
| E12734 | n/p | ROLLER | 1 | .50 | |
| E12735 | n/p | ROLLER PIN | 1 | .25 | |
| E9519 | 12 | LINK BLOCK | 2 | 5.50 | |
| E8151 | 13 | UPPER LINK BLOCK BOLT, NUT & COT. | 2 | .50 | |
| E8145-2 | 14 | LOWER LINK BLOCK BOLT & NUT | 2 | 2 | .75 |
| E939672-19 | 15 | COTTER PIN | 3 | .06 | |
| E940308-1 | 16 | GREASE FITTING | 1 | .10 | |
| E34910 | 17 | HINGE PIN RETAINER | 1 | .19 | |
| 1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS | |||||
| AOT GG (350 TON) BOTTLENECK ELEVATOR | |||||
| AOT# | RANGE | SIZE OF LINKS | WT. | ||
| E31068 | 3 1/2” – 5 1/2” | 2 1/4” – 3 1/2” | 715.00 | ||
| REPLACEMENT PARTS FOR GG ELEVATORS | |||||
| AOT# | ITEM # | DESCRIPTION | SPARES | # REQ. | WT. |
| E33998 | 1 | HINGE PIN | * | 1 | 18.38 |
| E31071 | 2 | LATCH | 1 | 50.00 | |
| E33999 | 3 | LATCH PIN | * | 1 | 10.38 |
| E18416 | 4 | LATCH SPRING | 2 | 1 | 2.25 |
| E13185 | 5 | LATCH SPRING STOP | 2 | 1 | .94 |
| E13152 | 6 | LATCH LOCK | * | 1 | 4.00 |
| E15101 | 7 | LATCH LOCK BOLT | 2 | 1 | 1.30 |
| E939484-8 | 8 | LATCH LOCK BOLT NUT | 2 | 1 | .20 |
| E13188 | 9 | LATCH LOCK SPRING | 2 | 1 | .30 |
| E13190 | 10 | DOOR LUG PIN | 1 | .32 | |
| E32892 | 11 | LATCH PIN RETAINER | 2 | 1 | .04 |
| E12732 | n/p | DOOR CATCH ARM | 1 | 1.50 | |
| E12916 | n/p | DOOR CATCH ARM PIN | 1 | .13 | |
| E9561 | n/p | DOOR CATCH SPRING | * | 1 | .13 |
| E12734 | n/p | ROLLER | 1 | .50 | |
| E12735 | n/p | ROLLER PIN | 1 | .25 | |
| E9519 | 12 | LINK BLOCK | 2 | 5.50 | |
| E8151 | 13 | UPPER LINK BLOCK BOLT, NUT & COT. | 2 | .50 | |
| E8145-2 | 14 | LINK BLOCK BOLT & NUT | 2 | 2 | .75 |
| E939672-19 | 15 | COTTER PIN | 3 | .06 | |
| E940308-1 | 16 | GREASE FITTING | 1 | .10 | |
| E31074 | 11 | HINGE PIN RETAINER | * | 1 | .50 |
| 1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS | |||||
| AOT HGG (350 TON) BOTTLENECK ELEVATOR | |||||
| AOT# | RANGE | SIZE OF LINKS | WT. | ||
| E70013 | 4” – 6 5/8” | 4” – 6 5/8” | 715.00 | ||
| AOT# | ITEM # | DESCRIPTION | SPARES | # REQ. | WT. |
| E30553 | 1 | HINGE PIN | * | 1 | 18.38 |
| E30460 | 2 | LATCH | 1 | 50.00 | |
| E30613 | 3 | LATCH PIN | * | 1 | 10.38 |
| E31228 | 4 | LATCH SPRING | 2 | 1 | 2.25 |
| E31215 | 5 | LATCH SPRING STOP | 2 | 1 | .94 |
| E13152-1 | 6 | LATCH LOCK | * | 1 | 4.00 |
| E31138 | 7 | LATCH LOCK BOLT | 2 | 1 | 1.30 |
| E939484-8 | 8 | LATCH LOCK BOLT NUT | 2 | 1 | .20 |
| E13188 | 9 | LATCH LOCK SPRING | 2 | 1 | .30 |
| E31216 | 10 | DOOR LUG PIN | 1 | .32 | |
| E32892 | 11 | LATCH PIN RETAINER | 2 | 1 | .04 |
| E12732 | n/p | DOOR CATCH ARM | 1 | 1.50 | |
| E12916 | n/p | DOOR CATCH ARM PIN | 1 | .13 | |
| E9561 | n/p | DOOR CATCH SPRING | * | 1 | .13 |
| E12734 | n/p | ROLLER | 1 | .50 | |
| E12735 | n/p | ROLLER PIN | 1 | .25 | |
| E30492 | 12 | LINK BLOCK | 2 | 5.50 | |
| E8151 | 13 | UPPER LINK BLOCK BOLT, NUT & COT. | 2 | .50 | |
| E8145-2 | 14 | LINK BLOCK BOLT & NUT | 2 | 2 | .75 |
| E939672-19 | 15 | COTTER PIN | 3 | .06 | |
| E940308-1 | 16 | GREASE FITTING | 1 | .10 | |
| E30609 | 11 | HINGE PIN RETAINER | * | 1 | .50 |
| 1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS | |||||
| AOT TA-65 (65 TON) & TA-100 (100 TON) CENTER LATCH ELEVATORS | |||||
| AOT# | RANGE | DESCRIPTION | SIZE OF LINKS | WT. | |
| E32385 | 1.660 – 2 7/8” | TA-65 C. L. ELEVATOR | 1 3/4” – 2 3/4” | 65.00 | |
| E32386 | 3 1/2” – 4 1/2” | TA-65 C. L. ELEVATOR | 1 3/4” – 2 3/4” | 83.00 | |
| E32383 | 2 3/8” – 2 7/8” | TA-100 C. L. ELEVATOR | 1 3/4” – 2 3/4” | 119.00 | |
| E32384 | 3 1/2” – 4 1/2” | TA-100 C丄.ELEVATOR | 1 3/4” – 2 3/4” | 158.00 | |
| REPLACEMENT PARTS FOR TA-65 & TA-100 ELEVATORS | |||||
| AOT# | ITEM # | DESCRIPTION **SPARES # REQ. | WT. | ||
| E32916 | 3 | HINGE PIN (FRAME 32385) | 1 | 5.00 | |
| E32915 | 3 | HINGE PIN (FRAME 32386 & 32383) | 1 | 6.00 | |
| E32919 | 3 | HINGE PIN (FRAME 32384) | 1 | 3.00 | |
| E32380 | 4 | LATCH | 1 | 5.50 | |
| E32424-3 | 5 | LATCH PIN (FRAME 32385) | 1 | 1 | .75 |
| E50713 | 5 | LATCH PIN (FRAME 32386 & 32383) | 1 | 1 | 1.00 |
| E32424-1 | 5 | LATCH PIN (FRAME 32384) | 1 | 1 | 1.13 |
| E32470 | 6 | LATCH SPRING | 2 | 1 | .19 |
| E32381-1 | 7 | LATCH LOCK | 1 | 2.75 | |
| E36208 | 8 | LATCH LOCK PIN | 2 | 1 | .25 |
| E32469 | 9 | LATCH LOCK SPRING | 2 | 1 | .19 |
| E32382 | N/P | LATCH LOCK ASSY. | 1 | 8.69 | |
| E32892 | 10 | HINGE PIN RETAINER (FRAME 32385, 32386 & 32383) | 1 | .04 | |
| E32920 | 10 | HINGE PIN RETAINER | 1 | .06 | |
| E32430 | 11 | LINK BLOCK | 2 | 2.19 | |
| E29359 | 12 | USE P/N E939099-65 | 2 | .25 | |
| E939099-65 | 13 | UPPER & LOWER LINK BLOCK BOLT, NUT & COTTTER | 2 | 2 | .40 |
| E939484-7 | 14 | LINK BLOCK NUT | 2 | 2 | .10 |
| E939672-19 | 15 | COTTER PIN | 2 | 2 | .06 |
| E940308-1 | 16 | GREASE FITTING | 2 | .10 | |
| E944048-15 | 17 | EXPANSION PLUG (FRAME 32385) | 1 | .70 | |
| E944048-16 | 17 | EXPANSION PLUG (FRAME 32386 & 32384) | 1 | .70 | |
| E944048-19 | 17 | EXPANSION PLUG (FRAME 32383) | 1 | .70 | |
| RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO BE RUN | |||||
| AOT MAA (175 TON) CENTER LATCH ELEVATOR | |||||
| AOT# | RANGE | SIZE OF LINKS | WT. | ||
| E12526 | 2 3/8，，- 3 1/2” | 2 1/4”-3 1/2” | 88.00 | ||
| REPLACEMENT PARTS FOR MAA ELEVATORS | |||||
| AOT # ITEM # DESCRIPTION **SPARES # REQ. WT. | |||||
| E12704 | 1 | HINGE PIN | 1 | 5.00 | |
| E11763 | 2 | LATCH | 1 | 9.25 | |
| E11758 | 3 | LATCH PIN | 1 | 2.13 | |
| E11766 | 4 | LATCH SPRING | 2 | 1 | .50 |
| E11581 | 5 | LATCH CAM | 1 | 1 | 1.00 |
| E11764 | 6 | LATCH LOCK | 1 | 3.00 | |
| E11759 | 7 | LATCH LOCK PIN | 2 | 1 | .57 |
| E12529 | 8 | DOOR LUG PIN | 1 | .19 | |
| E8156 | 9 | LATCH RETAINER PIN | 2 | 1 | .06 |
| E9519 | 10 | LINK BLOCK | 2 | 5.50 | |
| E8151 | 11 | UPPER LINK BLOCK BOLT, NUT , & COTTER | 2 | 2 | .50 |
| E8145-2 | 12 | LINK BLOCK BOLT | 2 | 2 | .80 |
| E8150 | N/P | LINK BLOCK NUT | 2 | 2 | .39 |
| E9519-1 | N/P | LINK BLOCK ASSY. | 2 | 7.00 | |
| E8145-2 | N/P | LINK BLOCK BOLT ASSY. | 2 | 1.19 | |
| E939672-18 | 13 | COTTER PIN | 2 | 2 | .10 |
| E940308-1 | 14 | GREASE FITTING | 1 | .10 | |
| E940308-8 | 15 | GREASE FITTING | 1 | .10 | |
| RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO BE RUN | |||||
| AOT MRA (150 TON) SQUARE SHOULDER ELEVATOR | |||||
| AOT # RANGE SIZE OF LINKS WT. | |||||
| E30158 2 3/8” – 5” 1 3/4” – 2 3/4” 210-185 | |||||
| REPLACEMENT PARTS FOR MRA ELEVATORS | |||||
| AOT # | ITEM # | DESCRIPTION | ^”SPARES | # REQ. | WT. |
| E26813 | 1 | HINGE PIN | * | 1 | 4.85 |
| E11763 | 2 | LATCH | 1 | 9.25 | |
| E26814 | 3 | LATCH PIN | * | 1 | .50 |
| E11766 | 4 | LATCH SPRING | 2 | 1 | .25 |
| E11581 | 5 | LATCH CAM | 1 | 1 | .75 |
| E11764 | 6 | LATCH LOCK | * | 1 | 3.00 |
| E11759 | 7 | LATCH LOCK PIN | 1 | 1 | .75 |
| E12529 | 8 | DOOR LUG PIN | 1 | .25 | |
| E8156 | 9 | LATCH PIN RETAINER | 1 | 1 | .25 |
| E26817 | 10 | LINK BLOCK | 2 | 3.50 | |
| E8031 | 11 | LINK BLOCK PIN | 2 | .45 | |
| E8145-2 | 12 | LINK BLOCK BOLT, & NUT & | 2 | 2 | .75 |
| E939672-18 | 13 | COTTER PIN | 2 | 3 | .10 |
| E940308-1 | 14 | GREASE FITTING | 1 | .10 | |
| E940308-8 | 15 | GREASE FITTING | 1 | .10 | |
| 1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * | ^ THESE ITEMS | ||||
| AOT SINGLE JOINT ELEVATORS | |||||
| AOT# | RANGE | WT. | |||
| E39-039 | 2 3/8” – 5 1/2” | 51.00 | |||
| E39-200 | 2 3/8” – 3 1/2” | 63.00 | |||
| E39-210 | 4” – 5 3/4” | 63.00 | |||
| E39-040 | 5 3/4” – 7 5/8” | 69.00 | |||
| E39-041 | 8” – 10 3/4” | 98.00 | |||
| E39-042 | 11 3/4” – 13 3/8” | 130.00 | |||
| E39-043 | 14” – 20” | 213.00 | |||
| REPLACEMENT PARTS FOR SINGLE JOINT ELEVATORS | |||||
| AOT # | ITEM # | DESCRIPTION | **SPARES | # REQ. | WT. |
| E39-034 | 1 | 2 3/8” – 20” LATCH SPRING | 2 | 1 | .08 |
| E39-035 | 2 | 2 3/8” – 13 3/8” LATCH | 1 | 5.50 | |
| E39-050 | 3 | 2 3/8” – 20” LATCH PIN | 1 | .35 | |
| E39-051 | 4 | 2 3/8” – 20” LATCH RET PIN ASSY. | 1 | 1 | .65 |
| E39-052 | 5 | 2 3/8” – 13 3/8” HINGE PIN | 1 | .75 | |
| E39-054 | 2 | 14” – 20” LATCH | 1 | 7.00 | |
| E39-053 | 5 | 14” – 20” HINGE PIN | 1 | 1.00 | |
| E39-055 | 6 | 2 3/8” – 20” HINGE PIN RETAINING PIN | 1 | .08 | |
| E34568 | N/P | SWIVEL SUSPENSION ASSEMBLY | 1 | 19.00 | |
| AOT SLX – 65 TON SIDE DOOR ELEVATOR | |||||
| AOT# | RANGE | WT. | |||
| E38-045 | 3 1/2” – 5 1/2” | 160.00 | |||
| E38-067 | 5 3/4” – 8 5/8” | 190.00 | |||
| E38-809 | 9” – 10 3/4” | 218.00 | |||
| E38-137 | 11” – 14 1/4” | 275.00 | |||
| © 0 0 | |||||
| REPLACEMENT PARTS FOR SLX- 65 ELEVATORS | |||||
| AOT# | ITEM # | DESCRIPTION | **SPARES # REQ. | WT. | |
| E33812 | 1 | LATCH LOCK (3 1/2” – 5 1/2”） | 1 | 3.38 | |
| E33813 | 2 | LATCH (3 1/2” – 5 1/2”） | 1 | 3.44 | |
| E33816 | 3 | LATCH LOCK SPRING (3 1/2” – 5 1/2”） | 2 | 1 | .25 |
| E34612 | 4 | HINGE PIN (3 1/2” – 8 5/8”） | 1 | 2.00 | |
| E29980-3 | 5 | LATCH PIN (3 1/2” – 5 1/2”） | 1 | .83 | |
| E29980-3 | 9 | LATCH LOCK PIN (3 1/2” – 5 1/2”） | 1 | .83 | |
| E33818 | 6 | LATCH SPRING (3 1/2” – 5 1/2”） | 2 | 1 | .19 |
| E33817 | 7 | ROLLER | 1 | .25 | |
| E31584 | 8 | ROLLER PIN | 1 | .10 | |
| E34X6 | 10 | LINK BLOCK BOLT (3 1/2” – 5 1/2”） | 2 | 2 | .75 |
| E53201 | 11 | GREASE FITTING | 2 | .10 | |
| E31332 | 1 | LATCH LOCK (5 3/4” – 14 1/4”） | 1 | 3.50 | |
| E31331 | 2 | LATCH (5 3/4” – 14 1/4”） | 1 | 4.50 | |
| E34611 | 4 | HINGE PIN (9 5/8” – 14 1/4”） | 1 | 2.00 | |
| E32424-3 | 5 | LATCH PIN (5 3/4” – 14 1/4”） | 1 | .83 | |
| E29980-4 | 9 | LATCH LOCK PIN (5 3/4” – 14 1/4”） | 1 | .50 | |
| E31383 | 6 | LATCH SPRING (5 3/4” – 14 1/4”） | 2 | 1 | .45 |
| E31404 | 3 | LATCH LOCK SPRING ( 5 3/4” – 14 1/4”） | 2 | 1 | .19 |
| E34X7 | 10 | LINK BLOCK BOLT (5 3/4”-14 1/4”） | 2 | 2 | 1.00 |
| E34614 | 12 | HINGE PIN RETAINER | 1 | .06 | |
| 1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS | |||||
| AOT SLX – 150 (150 TON) SIDE DOOR ELEVATORS | |||||
| AOT# | RANGE | WT. | |||
| E31239 | 5 1/2” – 8 5/8” | 300.00 | |||
| E33950 | 9 5/8” – 10 3/4” | 420.00 | |||
| E33982 | 11 3/4” – 13 3/8” | 475.00 | |||
| E33632 | 16” – 20” | 720.00 | |||
| REPLACEMENT PARTS FOR SLX-150 ELEVATORS | |||||
| AOT # | ITEM # | DESCRIPTION | **SPARES # REQ. | WT. | |
| E34611 | 3 | HINGE PIN ( 5 1/2” – 8 5/8”） | 1 | 4.44 | |
| E33953 | 3 | HINGE PIN ( 9 5/8” – 10 3/4”） | 1 | 6.25 | |
| E33985 | 3 | HINGE PIN ( 11 3/4” – 13 3/8”） | 1 | 8.50 | |
| E33646 | 3 | HINGE PIN (16” – 20”） | 1 | 10.00 | |
| E31331 | 4 | LATCH (5 1/2” – 13 3/8”） | 1 | 4.50 | |
| E33634 | 4 | LATCH ( 16” – 20”） | 1 | 6.00 | |
| E32424-3 | 5 | LATCH PIN (5 1/2” – 13 3/8”） | 1 | 1 | .75 |
| E33645 | 5 | LATCH PIN (16” – 20”） | 1 | 1 | 2.00 |
| E31383 | 6 | LATCH SPRING (5 1/2” – 13 3/8”） | 2 | 1 | .44 |
| E33657 | 6 | LATCH SPRING (16” – 20”） | 2 | 1 | .50 |
| E31332 | 7 | LATCH LOCK (5 1/2” – 13 3/8”） | 1 | 3.50 | |
| E33635 | 7 | LATCH LOCK (16” – 20”） | 1 | 5.00 | |
| E29980-4 | 8 | LATCH LOCK PIN (5 1/2” – 13 3/8”） | 1 | 1 | .50 |
| E50713 | 8 | LATCH LOCK PIN (16” – 20”） | 1 | 1 | 1.00 |
| E31404 | 9 | LATCH LOCK SPRING (5 1/2” – 13 3/8”） | 2 | 1 | .19 |
| E33658 | 9 | LATCH LOCK SPRING (16” – 20”） | 2 | 1 | .50 |
| E31407 | 10 | ROLLER | 1 | .38 | |
| E31584 | 11 | ROLLER PIN | 1 | .13 | |
| E34614 | 12 | HINGE PIN RETAINER (5 1/2” – 8 5/8”） | 1 | .06 | |
| E32918 | 12 | HINGE PIN RETAINER (9 5/8” – 10 3/4”） | 1 | .06 | |
| E32892 | 12 | HINGE PIN RETAINER (11 3 /4” – 20”） | 1 | .04 | |
| E9519 | 13 | LINK BLOCK | 2 | 5.50 | |
| E8151 | 14 | LINK BLOCK PIN | 2 | 2 | .50 |
| E8145 | 15 | LINK BLOCK BOLT | 2 | 2 | .50 |
| E8150 | 16 | LINK BLOCK NUT | 2 | 2 | .13 |
| E939672-20 | 17 | COTTER PIN | 2 | 2 | .06 |
| E940308-1 | 18 | GREASE FITTING | .10 | ||
| L ACCESS | |||||
| AOT 3-1/2” “TS-100” MANUAL TUBING SPIDER | |||||
| The 3-1/2” TS-100 tubing spider and slip assembly can handle | |||||
| tubing sizes 3/4” thru 3-1/2” O.D. by changing 9 removable | |||||
| inserts. The spider and slip are made of alloy steel and heat | |||||
| treated for strength. All come with full certification and data | |||||
| books are available upon request. | |||||
| AOT# | ITEM # | DESCRIPTION | REF# | *SPARES | # REQ. |
| 17-300 | 3-1/2” SPIDER COMPLETE LESS INSERTS | N/A | 1 | ||
| 17-301 | SLIP ASSY. LESS INSERTS | 7502-104 | 1 | ||
| 17-302 | 3-1/2” TS-100 BOWL ONLY | 7502-100 | 1 | ||
| 17-101 | 3 | RIGHT HAND SEGMENT | 7502-C-217 | 1 | |
| 17-102 | 4 | CENTER SEGMENT | 7502-B-217 | 1 | |
| 17-103 | 5 | LEFT HAND SEGMENT | 7502-A-217 | 1 | |
| 17-104 | 6 | LATCH HANDLE | 7502-A-214 | 1 | |
| 17-105 | LATCH | 7502-A-207 | 1 | ||
| 17-108 | 8 | LATCH PIN W/COTTER | 7502-B-207 | 2 | 1 |
| 17-109 | 9 | LATCH SPRING | 7502-C-207 | 2 | 1 |
| 17-110 | 10 | HINGE PIN F/SLIP W/COTTER | 7502-A-216 | 2 | |
| 17-111 | 11 | LINE KEEPER W/COTTER | 7502-B-216 | 6 | 3 |
| 17-112 | 12 | HINGE PIN F/BOWL | 7502-A-202 | 1 | |
| 17-113 | 13 | LOCK PIN W/BAIL & CHAIN | 7502-D-203 | 1 | |
| 17-114 | 14 | SNAP RING | 7502-103-X | 1 | 1 |
| * RECOMMENDED SPARE PARTS F/1 YEAR OPERATION | |||||
| INSERTS FOR 3-1/2” | “TS-100” | SPIDER | |||
| AOT# | DESCRIPTION | REF# | # REQ. | ||
| 21-101 | 3-1/2” X 3-1/2” | 7502-A-5069 | 9 | ||
| 21-110 | 3-1/2” X 3-3/8” | N/A | 9 | ||
| 21-102 | 3-1/2” X 3-1/8” | N/A | 9 | ||
| 21-103 | 3-1/2” X 2-7/8” | 7502-A-5070 | 9 | ||
| 21-104 | 3-1/2” X 2-3/8” | 7502-A-5071 | 9 | ||
| 21-105 | 3-1/2” X 2-1/16” | 7502-A-5072 | 9 | ||
| 21-111 | 3-1/2” X 2” | N/A | 9 | ||
| 21-106 | 3-1/2” X 1-1/2” | 7502-A-5074 | 9 | ||
| 21-107 | 3-1/2” X 1-1/4” | 7502-A-5075 | 9 | ||
| 21-108 | 3-1/2” X 1” | 7502-A-5076 | 9 | ||
| 21-109 | 3-1/2” X 3/4” | 7502-A-5077 | 9 | ||
| AOT 4-1/2” & 5-1/2” “TS-100” MANUAL SPIDER | |||||
| The 4-1/2” spider and slip uses the 4-1/2” “DU” rotary slip | |||||
| insert and has a range of 1.660” thru 4-1/2” O.D. by changing | |||||
| the 12 inserts. The 5-1/2” spider and slip uses the 5-1/2” “D”U | |||||
| rotary slip insert and has a range of 2-7/8” thru 5-1/2” O.D. by | |||||
| changing the 12 inserts. The 5-1/2” spider is specifically | |||||
| designed to run the Reda or Kobe cable. Both spiders and slip | |||||
| assemblies are designed for heavy duty use. Both are made of | |||||
| alloy steel and heat treated for strength and wear resistance. | |||||
| Both spiders are rated for 100 ton capacity. | |||||
| COMPLETE SPIDER ASSEMBLIES | |||||
| AOT# | DESCRIPTION | # REQ. | WT. | ||
| 18-450 | 4-1/2” TS-100 SPIDER COMPLETE W/SLIPS LESS INSERTS | 1 | 249.0 | ||
| 18-550 | 5-1/2” TS-100 SPIDER COMPLETE W/SLIPS LESS INSERTS | 1 | 303.0 | ||
| REPLACEMENT PARTS FOR 4-1/2” & 5-1/2” “TS-100” SPIDER | |||||
| AOT# | ITEM# | DESCRIPTION *SPARES | # REQ. | WT. | |
| 18-451 | 1 | 4-1/2” BOWL ONLY | 1 | 155.0 | |
| 18-452 | 2 | 4-1/2” SLIP ASSY. COMPLETE LESS INSERTS | 1 | 60.0 | |
| 18-453 | 3 | 4-1/2” SLIP HANDLES ONLY (SET) | 1 | 20.0 | |
| 18-454 | 4 | 4-1/2” SLIP SEGMENTS EACH | 1 | 6.80 | |
| 18-457 | 7 | 4-1/2” HINGE PIN | 1 | 3.50 | |
| 18-458 | 8 | 4-1/2” REMOVEABLE HINGE PIN | 1 | 3.75 | |
| 18-455 | 5 | 4-1/2” & 5-1/2” INSERT RETAINER PIN | 12 | 1 | .20 |
| 18-456 | 6 | 4-1/2” & 5-1/2” SEGMENT RETAINER PIN | 6 | 1 | .25 |
| 18-551 | 1 | 5-1/2” BOWL ONLY | 1 | 213.0 | |
| 18-552 | 2 | 5-1/2” SLIP ASSY. COMPLETE LESS INSERTS | 1 | 70.0 | |
| 18-553 | 3 | 5-1/2” SLIP HANDLES ONLY (SET) | 1 | 21.0 | |
| 18-554 | 4 | 5-1/2” SLIP SEGMENTS EACH | 2 | 8.00 | |
| 18-557 | 7 | 5-1/2” HINGE PIN | 3 | 4.00 | |
| 18-558 | 8 | 5-1/2” REMOVABLE HINGE PIN | 1 | 4.25 | |
| PSR 1.625_1 5/8″ EXTERNAL SNAP RING | |||||
| RECOMMENDED SPARE PARTS F/1 YEAR OPERATION | |||||
| INSERTS FOR 4-1/2” – 5-1/2” SPIDER ON PAGE 4 | |||||
| AOT 8-5/8” “API” BOWL | |||||
| The AOT API BOWL has the same bore and taper (4” per ft.) | |||||
| as the API #3 split bowl. All API drill collar, drill pipe & casing | |||||
| slips can be used in this bowl. It has a range of 2-1/16” thru | |||||
| 10” F.J. and is rated for 100 tons. | |||||
| AOT# | DESCRIPTION | # REQ. | WT. | ||
| 17-850 | 8-5/8” API BOWL | 1 | 600.0 | ||
| 17-851 | REMOVABLE HINGE PIN W/CHAIN | 2 | 8.0 | ||
| AOT 200 TON HINGED CASING SPIDERS | |||||
| AOT# | DESCRIPTION | WT. | |||
| 30-303 | 30” 200 TON HINGED CASING SPIDER | 2200.00 | |||
| 30-203 | 20” 200 TON HINGED CASING SPIDER | 1625.00 | |||
| 30-133 | 13-3/8” 200 TON HINGED CASING SPIDER | 950.00 | |||
| NOTE: AOT “CMS-3” SLIPS FIT & BAASH ROSS® UC-3 SLIPS FIT ABOVE SPIDERS | |||||
| REDUCING BUSHINGS FOR 200 TON HINGED CASING SPIDERS | |||||
| AOT# | DESCRIPTION | WT. | |||
| 30-326 | 30” X 26” REDUCING BUSHING | 610.00 | |||
| 30-324 | 30” X 24” REDUCING BUSHING | 755.00 | |||
| 30-320 | 30” X 20” REDUCING BUSHING | 905.00 | |||
| 30-216 | 20” X 16” REDUCING BUSHING | 395.00 | |||
| 30-213 | 20” X13-3/8” REDUCING BUSHING | 480.00 | |||
| 30-190 | 20” X 10-3/4” REDUCING BUSHING | 525.00 | |||
| 30-195 | 13-3/8” X 10-3/4” REDUCING BUSHING | 165.00 | |||
| 30-188 | 13-3/8” X 8-5/8” REDUCING BUSHING | 265.00 | |||
| 30-201 | REMOVABLE HINGE PIN W/CHAIN FOR ALL SPIDERS | 18.00 | |||
| 30-202 | BUSHING HANDLE | 4.00 | |||
| 30-204 | BUSHING RETAINER BOLTS & NUTS | 1.00 | |||
| AOT DUAL SPIDER | |||||
| The AOT Dual Spider is designed to run dual strings of tubing at the same time or one at a time. The spider has | |||||
| a 100 ton rating. It has a size range of 1”（1.050”）thru 2 7/8” by simply changing inserts. | |||||
| The spider will run any two different sizes or the same two sizes at the same time. | |||||
| AOT# | DESCRIPTION | # REQ. | WT. | ||
| 17-860 | DUAL BOWL COMPLETE W/BUSHING & 2 SLIP ASSY/S，LESS INSERTS | 1 | 864.00 | ||
| 17-861 | DUAL BOWL COMPLETE W/BUSHING | ||||
| LESS SLIP ASSY/S | 1 | 794.00 | |||
| 17-862 | DUAL BUSHING ONLY | 1 | 194.00 | ||
| 17-863 | SLIP ASSY. LESS INSERTS | 2 | 35.00 | ||
| 17-864 | RIGHT HAND SEGMENT F/DUAL SLIP | 1 PER SLIP | 11.00 | ||
| 17-865 | CENTER SEGMENT F/DUAL SLIP | 1 PER SLIP | 13.00 | ||
| 17-866 | LEFT HAND SEGMENT F/DUAL SLIP | 1 PER SLIP | 11.00 | ||
| 17-110 | HINGE PIN F/SLIP W/COTTER | 2 PER SLIP | .25 | ||
| 17-111 | LINER KEEPER W/COTTER | 3 PER SLIP | .12 | ||
| 17-851 | REMOVABLE HINGE PIN W/CHAIN | 2 | 8.00 | ||
| 17-867 | BUSHING RETAINING BOLTS | 4 | .25 | ||
| 17-868 | BUSHING LIFTING EYES | 2 | .40 | ||
| INSERTS FOR DUAL SLIPS | |||||
| (NOTE EACH SLIP TAKES 6EA. INSERTS | |||||
| BELOW & 3 REGULAR 3 1/2” TS-100 INSERTS) | |||||
| AOT# | DESCRIPTION | # REQ. | WT. | ||
| 21-103-D | 2 7/8” X 2 7/8” INSERT F/DUAL SLIP | 6 | 1.50 | ||
| 21-104-D | 2 7/8” X 2 3/8” INSERT F/DUAL SLIP | 6 | 1.75 | ||
| 21-105-D | 2 7/8” X 2 1/16” INSERT F/DUAL SLIP | 6 | 2.00 | ||
| 21-106-D | 2 7/8” X 1 1/2”（1.900”）INSERT F/DUAL SLIP | 6 | 2.25 | ||
| 21-107-D | 2 7/8” X 1 1/4”（1.660”）INSERT F/DUAL SLIP | 6 | 2.50 | ||
| 21-108-D | 2 7/8” X 1”（1.315”）INSERT F/DUAL SLIP | 6 | 2.75 | ||
| 21-109-D | 2 7/8” X 3/4”（1.050”）INSERT F/DUAL SLIP | 6 | 2.87 | ||
| INSERTS (SETS) FOR DUAL BOWL | |||||
| AOT# | DESCRIPTION | # REQ. | WT. | ||
| 21-103-DSET | 2 7/8” X 2 7/8”（SET) INSERTS F/DUAL SLIP | 1 PER SLIP | 13.50 | ||
| 21-104-DSET | 2 7/8” X 2 3/8”（SET) INSERTS F/DUAL SLIP | 1 PER SLIP | 15.75 | ||
| 21-105-DSET | 2 7/8” X 2 1/16”（SET) INSERTS F/DUAL SLIP | 1 PER SLIP | 18.00 | ||
| 21-106-DSET | 2 7/8” X 1 1/2”（1.900” SET) INSERTS F/DUAL SLIP | 1 PER SLIP | 20.25 | ||
| 21-107-DSET | 2 7/8” X 1 1/4”（1.660” SET) INSERTS F/DUAL SLIP | 1 PER SLIP | 22.50 | ||
| 21-108-DSET | 2 7/8” X 1”（1.315” SET) INSERTS F/DUAL SLIP | 1 PER SLIP | 24.75 | ||
| 21-109-DSET | 2 7/8” X 3/4”（1.050” SET) INSERTS F/DUAL SLIP | 1 PER SLIP | 25.83 | ||
| AOT HYDRAULIC & PNEUMATIC TUBING SPIDERS | |||||
| The AOT 125 TON HYD/AIR tubing spider is designed for heavy duty use. It has a size range of 1.315” – 5 1/2” by | |||||
| changing out slip bodies & inserts. It is made of high alloy heat treated steel for strength & resistance to wear. | |||||
| The AOT 55 TON HYD/AIR tubing spider is designed for light to medium duty operations with a size range | |||||
| 1.315” – 3 1/2” by changing out the inserts. | |||||
| AOT HYDRAULIC/PNEUMATIC SPIDERS | |||||
| AOT # | DESCRIPTION | # REQ. | WT. | ||
| 34-550 | 55 TON ASSY. LESS SLIP, INSERTS, HOSES,FOOT CONTROL , AND AIR FILTER | 1 | 217.00 | ||
| 34-551 | 125 TON ASSY. LESS SLIP, INSERTS, HOSES, FOOT CONTROL, AND AIR FILTER | 1 | 345.00 | ||
| 34-121 | 3 1/2” SLIP ASSY. (1.315” – 3 1/2”）LESS INSERTS f/55 TON | 1 | 12.00 | ||
| 34-122 | 3 1/2” SLIP ASSY. (1.315” – 3 1/2”）LESS INSERTS f/125 TON | 1 | 12.00 | ||
| 34-123 | 4 1/2” SLIP ASSY. (3 1/2” – 4 1/2”）LESS INSERTS f/125 TON | 1 | 11.00 | ||
| 34-125 | 5” SLIP ASSY. w/MILL CUT TEETH f/125 TON | 1 | 12.00 | ||
| 34-126 | 5 1/2” SLIP ASSY. w/MILL CUT TEETH f/125 TON | 1 | 11.00 | ||
| 34-127 | AIR FILTER, PRESSURE REGULATOR, GAUGE ASSY. w/LUBRICATOR & QUICK CHANGE CONN | 1 | 15.68 | ||
| 34-132 | HYD. CONTROL VALVE ASSY. | 1 | 25.00 | ||
| 34-134 | HYD. FOOT VALVE ONLY | 1 | 10.00 | ||
| 34-133 | HYD. DUST PLUG | 4 | .25 | ||
| 34-128 | HYD. PRESSURE REDUCER WITH GAUGE ASSY. | 1 | 8.00 | ||
| 34-129 | AIR CONTROL VALVE ASSY. FOOT OPERATED W/QUICK CHANGE COUPLING | 1 | 25.00 | ||
| 34-130 | 25J AIR HOSE | 2 | 5.00 | ||
| 34-131 | 25J AIR SUPPLY HOSE | 2 | 5.00 | ||
| 34-135 | 25J HYD. HOSE ASSEMBLY | 2 | 5.00 | ||
| 34-136 | 25J HYD. HOSE | 2 | 5.00 | ||
| FULL CIRCLE INSERTS | |||||
| 3 1/2” X 3 1/2” INSERTS (SET OF 4) | |||||
| 34-206 | 3 1/2” X 2 7/8” INSERTS (SET OF 4) | 1 | 14.00 | ||
| 34-207 | 3 1/2” X 2 3/8” INSERTS (SET OF 4) | 1 | 17.00 | ||
| 34-228 | 3 1/2” X 2 1/16” INSERTS (SET OF 4) | 1 | 18.50 | ||
| 34-229 | 3 1/2” X 1 1/2”（1.900”）INSERTS (SET OF 4) | 1 | 19.00 | ||
| 34-230 | 3 1/2” X 1 1/4”（1.660”）INSERTS (SET OF 4) | 1 | 19.50 | ||
| 34-231 | 3 1/2” X 1”（1.315”）INSERTS (SET OF 4) | 1 | 20.00 | ||
| 34-209 | 4 1/2” X 4 1/2” INSERTS (SET OF 4) | 1 | 10.00 | ||
| 34-210 | 4 1/2” X 4” INSERTS (SET OF 4) | 1 | 12.00 | ||
| 34-211 | 4 1/2” X 3 1/2” INSERTS (SET OF 4) | 1 | 14.00 | ||
| RECOMMENDED INSERTS FOR 1 YEAR ORDER 2 SETS FOR EACH SIZE TO BE RUN | |||||
| SLIP REPLACEMENT PARTS | |||||
| AOT# | DESCRIPTION | *SPARES | # REQ. | WT. | |
| 34-150 | SLIP BOLT | 4 | 4 | .50 | |
| 34-151 | NUT F/SLIP | 4 | 4 | .13 | |
| 34-152 | INSERT RETAINER PIN | 4 | 4 | .20 | |
| 34-153 | COTTER F/SLIP RETAINER PIN | 4 | 4 | .13 | |
| REPLACEMENT PARTS FOR | |||||
| 55 TON & 125 TON AOT SPIDERS | |||||
| AOT# 55 TON | AOT# 125 TON | DESCRIPTION WSPARES | #REQ. | WT. | |
| 34-501 | 34-601 | BODY ONLY | 1 | 283.00 | |
| 34-502 | 34-602 | GATE | 1 | 44.00 | |
| 34-503 | 34-603 | LINK | 1 | 5.50 | |
| 34-504 | 34-604 | SHAFT (LEFT HAND CRANK) | 1 | 8.00 | |
| 34-505 | 34-605 | SHAFT (RIGHT HAND CRANK) | 1 | 8.00 | |
| 34-506 | 34-606 | LIFTING ARM | 1 | 3.50 | |
| 34-607 | 34-607 | YOKE | 1 | 1 | 1.00 |
| 34-508 | 34-608 | SAFETY GUARD | 1 | 4.50 | |
| 34-609 | 34-609 | GREASE ZERT | 2 | 2 | .03 |
| 34-610 | 34-610 | BOLT | 1 | 1 | 3.30 |
| 34-611 | 34-611 | BOLT | 1 | 1 | 3.30 |
| 34-612 | 34-612 | NUT | 2 | 2 | 1.40 |
| 34-613 | 34-613 | BOLT W/LOCKWASHER | 4 | 4 | 6.30 |
| 34-514 | 34-614 | DOOR PIN W/CHAIN | 2 | 2.00 | |
| 34-615 | 34-615 | SET SCREW (FOR LIFTING ARM) | 2 | 2 | .15 |
| 34-616 | 34-616 | TAPER PIN (FOR LIFTING ARM)) | 4 | 4 | .50 |
| 34-517 | 34-617 | RETAINING CLIP | 2 | 2 | 1.00 |
| 34-618 | 34-618 | GREASE ZERT | 4 | 4 | .03 |
| 34-519 | 34-619 | CRANK BUSHING | 4 | 4 | 1.00 |
| 34-520 | 34-620 | LINK BUSHING | 2 | 2 | 8.80 |
| 34-521 | 34-621 | SPACER | 2 | 2.12 | |
| 34-628A | 34-628A | AIR COUPLING (MALE) | 2 | 2 | 3.25 |
| 34-628H | 34-628H | HYDRAULIC COUPLING (MALE) | 2 | 2 | 3.25 |
| 34-629 | 34-629 | SAFETY LATCH | 1 | 1 | 5.00 |
| 34-630 | 34-630 | SAFETY BOLT | 1 | 1 | 3.45 |
| 34-631 | 34-631 | AIR CYLINDER ASSY. | 1 | 14.00 | |
| 34-632 | 34-632 | HYDRAULIC CYLINDER ASSY. | 1 | 14.00 | |
| 34-633 | 34-633 | JAM NUT | 1 | 1 | 1.00 |
| 34-560 | 34-660 | SPARE PARTS KIT F/1YEAR L/INSERTS | 1 | 1 | 81.32 |
| rev 805 | |||||
| 1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS | |||||
| AOT “K-25” LIGHT WEIGHT TUBING TONG | |||||
| All tongs are pull-tested and complete documentation is available with each tong. | |||||
| AOT # | DESCRIPTION | WT. | |||
| 05-101 | K-25 TONG COMPLETE LESS DIES, ROPE GUIDE & HANGER | 16.50 | |||
| 05-102 | K-25 TONG COMPLETE LESS DIES w/ROPE GUIDE & HANGER | 21.00 | |||
| REPLACEMENT PARTS FOR “K-20” | & “K-25” | TUBING TONG | |||
| AOT# | ITEM# | DESCRIPTION | REF.# | #REQ. | WT.* |
| 05-103 | 1 | TONG HEAD PIN | 8527-5025 | 3 | .12 |
| 05-104 | 2 | TONG HANDLE PIN | 8527-5024 | 1 | .37 |
| 05-117 | 3 | SPRING LOCK FOR ALL PINS | 904685-71 | 8 | .03 |
| 05-105 | 4 | TONG DIE BUSHING & SCREW | N/A | 6 | .06 |
| 05-106 | 5 | K-25 HANDLE JAW | 8527-5032 | 1 | 2.12 |
| 05-107 | 6 | K-25 LATCH JAW | 8527-5034-03 | 1 | 2.12 |
| 05-108 | 7 | K-25 CENTER JAW | 8527-5033 | 1 | 1.75 |
| 05-109 | 8 | K-20 OR K-25 ROPE GUIDE | 8527-5023 | 1 | 2.75 |
| 05-110 | 9 | 3/4” HEX NUT f/ROPE GUIDE | 900645-50 | 1 | .06 |
| 05-113 | 10 | ROLLOVER HANGER COMPLETE | 8527-5018-03 | 1 | 1.75 |
| 05-111 | 11 | 3/8” x 2 1/4” HEX CAP SCREW | 900020-63 | 1 | .06 |
| 05-112 | 12 | 3/8” FLEXLOCK NUT | 902392-3 | 1 | .06 |
| 05-114 | 13 | TONG HANDLE f/K-25 OR K-20 | 8527-5024 | 1 | 9.75 |
| DIES FOR K-20 AND K-25 REFER TO PAGE 54 | |||||
| *RECOMMENDED SPARE PARTS FOR ONE YEAR | |||||
| RECOMMENDED DIES FOR ONE YEAR ORDER 3 FOR EACH SIZE REQUIRED | |||||
| ALL PARTS ARE INTERCHANGEABLE WITH KELCO** K-20 & K-25 TUBING TONGS | |||||
| AOT “K-30” MANUAL TUBING TONG | |||||
| The AOT K-30 Tubing Tong is Designed for heavy duty service of tubing 2.062” to 4.125” OD with a 5,000 ft.-lb. | |||||
| maximum torque rating. It has a wrap-around design with approximately a 300o die contact. This prevents cutting or | |||||
| crushing of thin wall tubing. All tongs are pull tested and complete documentation is available with each tong. | |||||
| AOT # | DESCRIPTION | REF# | WT. | ||
| 06-101 | K-30 TONG ASSEMBLY COMPLETE LESS HANGER & DIES | 8527-5035 | 48.00 | ||
| 06-102 | K-30 TONG ASSEMBLY COMPLETE LESS DIES w/STANDARD HANGER | 8527-5036 | 61.00 | ||
| 06-103 | K-30 TONG ASSEMBLY COMPLETE LESS DIES w/ROLLOVER HANGER | 8527-5037 | 64.00 | ||
| REPLACEMENT PARTS FOR “K-30” TUBING TONGS | |||||
| AOT# | ITEM# | DESCRIPTION | REF# | # REQ. | WT. |
| 06-104 | 1 | K-30 TONG HANDLE | 8527-5047 | 1 | 24.00 |
| 06-105 | 2 | K-30 HANDLE JAW | 8527-5045 | 1 | 8.00 |
| 06-106 | 3 | K-30 CENTER JAW | 8527-5049 | 1 | 5.50 |
| 06-107 | 4 | K-30 LATCH JAW | 8527-5050-03 | 1 | 5.75 |
| 06-108 | 5 | TONG HANDLE PIN | 8527-5052 1 | 1 | .75 |
| 06-109 | 6 | TONG HEAD PIN | 8527-5053 3 | 3 | .50 |
| 06-157 | 7 | 5/32” x 1” SPRINGLOCK | 904685-71 | 8 | .03 |
| 06-110 | 8 | TONG DIE BUSHING | 8527-5055 24 | 6 | .10 |
| 06-111 | 9 | TONG DIE SCREW | 902224-11348 | 6 | .06 |
| 06-112 | TONG ROLLOVER HANGER ASSY | 8527-5045 | 1 | 16.00 | |
| 06-113 | 10 | TONG HANGER | 8527-5042-03 | 1 | 13.00 |
| 06-155 | 11 | 1/2” x 2 1/2” HEX HD CAP SCREW | 900020-74 | 1 or 2 | .15 |
| 06-156 | 12 | 1/2” HEX NUT | 900160-5 | 1 or 2 | .08 |
| 06-114 | 13 | ROLLOVER BLOCK | 8527-5038-03 | 1 | 2.50 |
| 06-115 | ROLLOVER LOCK PIN | 8527-5040-03 | 1 | .38 | |
| DIES FOR K-30 REFER TO PAGE 54 | |||||
| RECOMMENDED SPARE PARTS FOR 1 YEAR OPERATION | |||||
| RECOMMENDED DIES FOR 1 YEAR ORDER 3 FOR EACH SIZE PIPE TO BE RUN | |||||
| TONG ROLLOVER HANGER ASSY. CONSISTS OF: TONG HANGER, ROLLOVER BLOCK, LOCK PIN | |||||
| AND ALL BOLTS & NUTS | |||||
| ALL PARTS ARE INTERCHANGEABLE WITH KELCO® K-30 TONGS | |||||
| AOT “K-50” MANUAL TUBING TONG | |||||
| The AOT K-50 Manual Tubing Tong is designed for heavy duty service for tubing and casing. It has a size range of 2 7/8” – 5 | |||||
| 1/2” OD with a 7,500 ft.-lb. maximum torque rating. It has a wrap-around design with approximately 300o die contact to | |||||
| prevent cutting or crushing thin wall pipe. All tongs are pull tested and complete documentation is available. | |||||
| AOT # | DESCRIPTION | WT. | |||
| 06-501 | K-50 TONG ASSEMBLY COMPLETE LESS HANGER & DIES | 60.00 | |||
| 06-502 | K-50 TONG ASSEMBLY COMPLETE LESS DIES w/STANDARD HANGER | 75.00 | |||
| 06-503 | K-50 TONG ASSEMBLY COMPLETE LESS DIES w/ROLLOVER HANGER | 77.50 | |||
| REPLACEMENT – | |||||
| PARTS FOR “K-50” TUBING TONGS | |||||
| AOT# | ITEM# | DESCRIPTION | #REQ. | WT. | •SPARES |
| 06-504 | 1 | K-50 TONG HANDLE | 1 | 32.00 | |
| 06-505 | 2 | K-50 HANDLE JAW | 1 | 10.00 | |
| 06-506 | 3 | K-50 CENTER JAW | 1 | 8.00 | |
| 06-507 | 4 | K-50 LATCH JAW | 1 | 8.50 | |
| 06-508 | 5 | TONG HANDLE PIN | 1 | 2.00 | 1 |
| 06-509 | 6 | TONG HEAD PIN | 3 | 1.50 | 3 |
| 06-516 | 7 | 3/16” x 1 1/2” SPRING LOCK | 8 | .04 | 8 |
| 06-510 | 8 | TONG DIE BUSHING | 6 | .12 | 24 |
| 06-511 | 9 | TONG DIE SCREW | 6 | .06 | 48 |
| 06-112 | TONG ROLLOVER HANGER ASSEMBLY 1 | 16.00 | |||
| 06-113 | 10 | TONG HANGER | 1 | 13.00 | |
| 06-155 | 11 | 1/2” x 2 1/2” HEX HEAD CAP SCREW | 1 or 2 | .15 | 2 |
| 06-156 | 12 | 1/2” HEX NUT | 1 or 2 | .08 | 2 |
| 06-114 | 13 | ROLLOVER BLOCK | 1 | 2.50 | |
| 06-115 | ROLLOVER LOCK PIN | 1 | .38 | ||
| rev 805 | |||||
| DIES FOR K-50 REFER TO PAGE 54 | |||||
| *RECOMMENDED SPARE PARTS FOR 1 YEAR OPERATION | |||||
| RECOMMENDED DIES FOR 1 YEAR ORDER 3 FOR EACH SIZE PIPE TO BE RUN | |||||
| TONG ROLLOVER HANGER ASSY. CONSISTS OF: TONG HANGER, ROLLOVER BLOCK, | |||||
| LOCK PIN AND ALL BOLTS & NUTS | |||||
| AOT “K-50 HT” MANUAL TONG | |||||
| The AOT K-50 HT Manual Tong is designed for heavy duty service for tubing & casing. | |||||
| It has a size range of 2 3/8” – 5” OD with a 15,000 ft.-lb. maximum torque rating. | |||||
| It has a wrap-around design with approximately 300^ die contact to prevent cutting or crushing of thin wall pipe. | |||||
| All tongs are pull tested and complete documentation is available. | |||||
| AOT# | DESCRIPTION | WT. | |||
| 06-605 | K-50 HT TONG ASSY. COMPLETE LESS HANGER & DIES | 82 | |||
| 06-606 | K-50 HT TONG ASSY. COMPLETE LESS DIES WITH STD. HANGER | 98 | |||
| 06-607 | K-50 HT TONG ASSY. COMPLETE LESS DIES W/ROLLOVER HANGER | 100 | |||
| REPLACEMENT PARTS FOR “K-50 HT” MANUAL TONGS | |||||
| AOT# | ITEM # | DESCRIPTION | # REQ. | WT. | *SPARES |
| 06-704 | 1 | K-50 HT – K-70 TONG HANDLE | 1 | 40.00 | |
| 06-601 | 2 | K-50 HT HANDLE JAW | 1 | 14.00 | |
| 06-602 | 3 | K-50 HT CENTER JAW | 1 | 13.00 | |
| 06-603 | 4 | K-50 HT LATCH JAW | 1 | 13.00 | |
| 06-708 | 5 | TONG HANDLE PIN | 1 | .75 | 1 |
| 06-508 | 6 | TONG HEAD PIN | 3 | .50 | 3 |
| 06-516 | 7 | 3/16” X 1 1/2” SPRING LOCK | 8 | .04 | 8 |
| 06-510 | 8 | TONG DIE BUSHING | 6 | .12 | 24 |
| 06-511 | 9 | TONG DIE SCREW | 6 | .06 | 48 |
| 06-112 | TONG ROLLOVER HANGER ASSY. | 1 | 16.00 | ||
| 06-113 | 10 | TONG HANGER | 1 | 13.00 | |
| 06-155 | 11 | 1/2” X 2 1/2” HEX HEAD CAP SCREW | 1 OR 2 | .15 | 2 |
| 06-156 | 12 | 1/2” HEX NUT | 1 OR 2 | .08 | 2 |
| 06-114 | 13 | ROLLOVER BLOCK | 1 | 2.50 | |
| 06-115 | ROLLOVER LOCK PIN | 1 | .38 | ||
| DIES FOR K-50 HT SAME AS K-50 DIES PAGE 54 | |||||
| AOT “K-70” MANUAL TONG | |||||
| The AOT K-70 Manual Tong is designed for heavy duty service for tubing & casing. It has a size range of 3 1/2” | |||||
| 7” OD | |||||
| with a 12,500 ft.-lb. maximum torque rating. It has a wrap-around design with approximately 300^ die contact to prevent cutting | |||||
| or crushing of thin wall pipe. All tongs are pull tested and complete documentation is available. | |||||
| AOT# | DESCRIPTION | WT. | |||
| 06-701 | K-70 TONG ASSY. COMPLETE LESS HANGER & DIES | 82 | |||
| 06-702 | K-70 TONG ASSY. COMPLETE LESS DIES WITH STD. HANGER | 98 | |||
| 06-703 | K-70 TONG ASSY. COMPLETE LESS DIES W/ROLLOVER HANGER | 100 | |||
| REPLACEMENT PARTS FOR “K-70” MANUAL TONGS | |||||
| AOT# | ITEM # | DESCRIPTION | # REQ. | WT. *SPARES | |
| 06-704 | 1 | K-70 TONG HANDLE | 1 | 40.00 | |
| 06-705 | 2 | K-70 HANDLE JAW | 1 | 14.00 | |
| 06-706 | 3 | K-70 CENTER JAW | 1 | 13.00 | |
| 06-707 | 4 | K-70 LATCH JAW | 1 | 13.00 | |
| 06-708 | 5 | TONG HANDLE PIN | 1 | .75 | |
| 06-508 | 6 | TONG HEAD PIN | 3 | .50 | |
| 06-516 | 7 | 3/16” X 1 1/2” SPRING LOCK | 8 | .04 | |
| 06-510 | 8 | TONG DIE BUSHING | 6 | .12 | |
| 06-511 | 9 | TONG DIE SCREW | 6 | .06 | |
| 06-112 | TONG ROLLOVER HANGER ASSY. | 1 | 16.00 | ||
| 06-113 | 10 | TONG HANGER | 1 | 13.00 | |
| 06-155 | 11 | 1/2” X 2 1/2” HEX HEAD CAP SCREW | 1 OR 2 | .15 | |
| 06-156 | 12 | 1/2” HEX NUT | 1 OR 2 | .08 | |
| 06-114 | 13 | ROLLOVER BLOCK | 1 | 2.50 | |
| 06-115 | ROLLOVER LOCK PIN | 1 | .38 | ||
| DIES FOR “K-70” TONGS | |||||
| AOT# | DESCRIPTION | # REQ. | WT. | ||
| 06-758 | K-70 – 3 1/2” | 3 | 13.25 | ||
| 06-757 | K-70 – 4” | 3 | 12.00 | ||
| 06-756 | K-70 – 4 1/2” | 3 | 10.50 | ||
| 06-755 | K-70 – 4 3/4” | 3 | 10.25 | ||
| 06-754 | K-70 – 5” | 3 | 9.50 | ||
| 06-753 | K-70 – 5 1/2” | 3 | 8.00 | ||
| 06-759 | K-70 – 5 3/4” | 3 | 7.25 | ||
| 06-752 | K-70 – 6” | 3 | 6.25 | ||
| 06-751 | K-70 – 6 5/8” | 3 | 4.75 | ||
| 06-750 | K-70 – 7” | 3 | 3.00 | ||
| DIES FOR “K-20”，“K-25”， | “K-30”，“K-50” | & “K-50HT” | TUBING TONGS | ||
| AOT# | DESCRIPTION | REF.# | # SET | WT. | |
| 04-119 | K-20 – 3/4”（1.050”） | 8527-5056-01 | 3 | 1.13 | |
| 04-120 | K-20 – 1”（1.315”） | 8527-5058-01 | 3 | 1.07 | |
| 04-121 | K-20 – 1-1/4”（1.660”） | 8527-5061-01 | 3 | .94 | |
| 04-122 | K-20 – 1-1/2”（1.900”） | 8527-5064-01 | 3 | .75 | |
| 04-123 | K-20 – 2-1/16” | 8527-5066-01 | 3 | .63 | |
| 04-124 | K-20 – 2-3/8” | 8527-5068-01 | 3 | .41 | |
| 05-129 | K-25 – 3/4”（1.050”） | N/A | 3 | 1.75 | |
| 05-120 | K-25 – 1”（1.315”） | 8527-5070-01 | 3 | 1.63 | |
| 05-121 | K-25 – 1-1/4”（1.660”） | 8527-5071-01 | 3 | 1.50 | |
| 05-122 | K-25 – 1-1/2”（1.900”） | 8527-5072-01 | 3 | 1.32 | |
| 05-123 | K-25 – 2-1/16” | 8527-5074-01 | 3 | 1.30 | |
| 05-124 | K-25 – 2-3/8” | 8527-5075-01 | 3 | 1.25 | |
| 05-125 | K-25 – 2-1/2” | 8527-5076-01 | 3 | .95 | |
| 05-126 | K-25 – 2.697” | 8527-5077-01 | 3 | .63 | |
| 05-127 | K-25 – 2.776” | N/A | 3 | .55 | |
| 05-128 | K-25 – 2-7/8” | 8527-5078-01 | 3 | .58 | |
| 06-132 | K-30 – 3/4” | N/A | 3 | 5.50 | |
| 06-136 | K-30 – 1” | N/A | 3 | 5.25 | |
| 06-133 | K-30 – 1-1/4”（1.660”） | N/A | 3 | 5.00 | |
| 06-134 | K-30 – 1-1/2”（1.900”） | N/A | 3 | 4.60 | |
| 06-119 | K-30 – 2-1/16” | 8527-5081-01 | 3 | 4.10 | |
| 06-120 | K-30 – 2-3/8 | 8527-5083-01 | 3 | 3.80 | |
| 06-121 | K-30 – 2-7/8” | 8527-5086-01 | 3 | 3.10 | |
| 06-135 | K-30 – 3” | N/A | 3 | 3.00 | |
| 06-122 | K-30 – 3-1/16” | 8527-5087-01 | 3 | 2.80 | |
| 06-123 | K-30 – 3-1/8” | N/A | 3 | 2.75 | |
| 06-124 | K-30 – 3-1/4” | 8527-5086-01 | 3 | 2.50 | |
| 06-130 | K-30 – 3-3/8” | N/A | 3 | 2.40 | |
| 06-125 | K-30 – 3-1/2” | 8527-5090-01 | 3 | 2.10 | |
| 06-126 | K-30 – 3.668” | 8527-5091-01 | 3 | 1.70 | |
| 06-127 | K-30 – 3-3/4” | 8527-5092-01 | 3 | 1.50 | |
| 06-131 | K-30 – 3-7/8” | N/A | 3 | 1.40 | |
| 06-128 | K-30 – 4-1/8” | 8527-5094-01 | 3 | .80 | |
| 06-575 | K-50 & K-50HT – 2-7/8” | N/A | 3 | 6.33 | |
| 06-576 | K-50 & K-50HT – 3-1/2” | N/A | 3 | 5.33 | |
| 06-577 | K-50 & K-50HT – 3-3/4” | N/A | 3 | 4.74 | |
| 06-578 | K-50 & K-50HT – 4” | N/A | 3 | 4.15 | |
| 06-579 | K-50 & K-50HT – 4-1/8” | N/A | 3 | 4.05 | |
| 06-580 | K-50 & K-50HT – 4-1/2” | N/A | 3 | 3.50 | |
| 06-581 | K-50 & K-50HT – 4-3/4” | N/A | 3 | 2.92 | |
| 06-582 | K-50 & K-50HT – 5” | N/A | 3 | 2.33 | |
| 06-583 | K-50 & K-50HT -5-1/2” | N/A | 3 | 1.17 | |
| AOT TYPE “C” SAFETY CLAMP | |||||
| The AOT Type “C” Safety Clamp is one of the most valuable tools on the Rig Floor. It helps guard against dropping flush-joint pipe, streamlined | |||||
| drill collars, etc. into the hole while making-up or breaking-out the string. These clamps are ideal as an emergency elevator shoulder for lifting | |||||
| prepacked gravel liners, flush-joint pipe, twisted-off fish and similar items which have no shoulders for attaching conventional elevators. The | |||||
| Type “C” Safety Clamp can be used as a “Slip and Elevator” combination when running large diameter surface casing or used for simplified | |||||
| handling of drilling risers and casing heads during installation. Literally, it has dozens of money and time-saving applications in oilfield work, | |||||
| in addition to giving increased protection against fishing jobs. | |||||
| The Safety Clamp consists of individual links, flexibly hinged together. Each link has a separate tapered slip which acts as a gripping member, | |||||
| much like a tapered rotary slip, and each slip is held in a retracted position on the taper by spring tension. When the clamp is tightened, each | |||||
| small slip takes a firm initial grip on the surface of the pipe. Should the pipe start to fall, or should load increase occur against the slips, the | |||||
| taper mounting causes each slip to wedge tighter against the surface of the pipe to increase the grip or lock the pipe against further | |||||
| movement. | |||||
| Gripping pressure is always uniform around the pipe so there is little danger of crushing thin-walled pipe or damaging the pipe surface. And, | |||||
| since each link, complete with tapered slip, is interchangeable as a unit, the Safety Clamp is readily adaptable to virtually any diameter. Each | |||||
| link changes the effective gripping diameter of the clamp one inch. All parts are made of alloy steel, heat-treated for strength and gripping | |||||
| ability. | |||||
| CLAMPS WITH HANDLES & WRENCH | |||||
| TYPE “CR”（SINGLE SCREW) | |||||
| AOT# | RANGE O.D. SIZE | REFERENCE | LINKS REQUIRED | WT. | |
| 12-127 | 3 3/4” – 4 5/8” | 7624-5103 | 7 | 46.00 | |
| 12-128 | 4 1/2” – 5 5/8” | 7624-5104 | 8 | 55.00 | |
| 12-129 | 5 1/2” – 6 5/8” | 7624-5105 | 9 | 60.00 | |
| 12-130 | 6 1/2” – 7 5/8” | 7624-5105 | 10 | 64.00 | |
| 12-131 | 7 1/2” – 8 5/8” | 7624-5105 | 11 | 69.00 | |
| 12-132 | 8 1/2” – 9 5/8” | 7624-5105 | 12 | 73.00 | |
| 12-133 | 9 1/2” – 10 5/8” | 7624-5105 | 13 | 78.00 | |
| TYPE “CL”（SINGLE SCREW) | |||||
| 12-134 | 10 1/2” – 11 5/8” | 7624-5103 | 14 | 82.00 | |
| 12-135 | 11 1/2” – 12 5/8” | 7624-5104 | 15 | 87.00 | |
| 12-136 | 12 1/2”-13 5/8” | 7624-5105 | 16 | 91.00 | |
| 12-137 | 13 1/2”-14 5/8” | 7624-5105 | 17 | 115.00 | |
| 12-138 | 14 1/2”-15 5/8” | 7624-5105 | 18 | 119.00 | |
| TYPE “C X L”（DOUBLE SCREW) | |||||
| 12-145 | 15 1/2” – 17” | 7624-5103 | 18 | 121.00 | |
| 12-146 | 16 1/2” – 18” | 7624-5104 | 19 | 125.00 | |
| 12-147 | 17 1/2” – 19” | 7624-5105 | 20 | 129.00 | |
| 12-148 | 18 1/2” – 20” | 7624-5105 | 21 | 134.00 | |
| ADD – “B” TO END OF PART NUMBER TO INCLUDE BOX | |||||
| CLAMPS WITH LIFTING CLEVIS | |||||
| _TYPE “CL”（SINGLE SCREW)_ | |||||
| AOT # | RANGE O.D. SIZE | REFERENCE # | LINKS REQUIRED | WT. | |
| 12-150 | 10 1/2” – 11 5/8” | 7624-5103 | 14 | 85.00 | |
| 12-151 | 11 1/2” – 12 5/8” | 7624-5104 | 15 | 89.00 | |
| 12-152 | 12 1/2”-13 5/8” | 7624-5105 | 16 | 94.00 | |
| 12-153 | 13 1/2”-14 5/8” | 7624-5105 | 17 | 99.00 | |
| 12-154 | 14 1/2”-15 5/8” | 7624-5105 | 18 | 104.00 | |
| TYPE “C X L”（DOUBLE SCREW) | |||||
| 12-155 | 15 1/2” – 17” | 7624-5103 | 18 | 36.00 | |
| 12-156 | 16 1/2” – 18” | 7624-5104 | 19 | 40.00 | |
| 12-157 | 17 1/2” – 19” | 7624-5105 | 20 | 44.00 | |
| 12-158 | 18 1/2” – 20” | 7624-5105 | 21 | 44.00 | |
| 12-159 | 19 1/2” – 21” | 7624-5105 | 22 | 44.00 | |
| 12-160 | 21 1/8” – 23” | 7624-5103 | 24 | 36.00 | |
| 12-161 | 24 1/8” – 26” | 7624-5104 | 27 | 40.00 | |
| 12-162 | 29 1/2” – 31” | 7624-5105 | 32 | 44.00 | |
| 12-163 | 35 1/2” – 37” | 7624-5105 | 38 | 44.00 | |
| 12-164 | 41 1/2” – 47” | 7624-5105 | 44 | 44.00 | |
| ADD -B TO END OF PART # TO INCLUDE BOX | |||||
| REPLACEMENT PARTS FOR TYPE “C” SAFETY CLAMP | |||||
| AOT# | ITEM | DESCRIPTION | REFERENCE # | ** SPARES | WT. |
| 12-101 | 1 | LINK ASSY. COMPLETE | 7624-A-7 | 5.00 | |
| 12-102 | 2 | LINK INTERMEDIATE | 7624-A-1 | 6 | 3.75 |
| 12-103 | 3 | INSERT w/COTTER | 7624-A-4 | 1 SET | 1.12 |
| 12-104 | 5 | COTTER f/INSERT | 900620-65 | .06 | |
| 12-105 | 4 | SPRING f/INSERT | 7624-E-5 | 1 SET | .06 |
| 11-106 | 6 | LINK PIN w/COTTER | 7624-C-5 | 6 | .75 |
| 11-107 | 7 | COTTER f/LINK PIN | 900620-36 | .06 | |
| 11-108 | 8 | END LINK (SCREW) | 7624-A-3 | 4.50 | |
| 11-109 | 9 | END LINK (PIVOT BLOCK) | 7624-A-24 | 3.50 | |
| 11-110 | 10 | END LINK PIN w/CHAIN | 7624-F-5 | 1 | 1.25 |
| 11-111 | 11 | SCREW | 7624-A-5 | 4.00 | |
| 11-112 | 12 | NUT | 7624-B-5 | 1.50 | |
| 11-113 | 13 | PIVOT BLOCK | 7624-A-5000 | 1.50 | |
| 11-114 | 14 | PIVOT BLOCK PIN | 7624-D-5 | .25 | |
| 11-115 | 15 | NUT WRENCH | 7624-A-25 | 4.00 | |
| 11-116 | 16 | HANDLE (CAST STEEL) | 7624-A-6 | 3.00 | |
| 11-117 | 17 | HANDLE LINK PIN w/COTTER | 7624-G-5 | .75 | |
| 11-118 | 18 | HANDLE KIT | 7624-A-5135 | 4.00 | |
| 11-119 | 19 | PIVOT BLOCK PIN WRENCH | 900533-12 | .25 | |
| 11-120 | SAFETY CLAMP BOX | 7624-A-9 | 45.00 | ||
| 12-119 | LIFTING CLEVIS COMPLETE | 7624-29 | 15.00 | ||
| 12-120 | 21 | LIFTING CLEVIS ONLY | 7624-A-29 | 9.00 | |
| 12-121 | 21 | CLEVIS PIN & NUT | 7624-A-30 | 2.50 | |
| ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® TYPE “C” SAFETY CLAMPS | |||||
| AOT TYPE “T” SAFETY CLAMP | |||||
| The AOT Type “T” Safety Clamp is designed for small diameter pipe 1 1/8” – 4 1/2” | |||||
| O.D. Each link changes the effective working range approximately 1” in diameter. For | |||||
| sizes larger than 4 1/2” O.D., the Type “C” Safety Clamp should be used. | |||||
| The same positive automatic gripping principle is used as in the Type “C” Safety | |||||
| Clamp. It is ideal to help safeguard against dropping strings of flush joint tubing, to | |||||
| provide a shoulder to position strings of flush line pipe for welding, and manyother | |||||
| SAFETY CLAMP ASSEMBLIES COMPLETE – TYPE “T” | |||||
| AOT# | RANGE O.D. SIZE | REFERENCE | #LINK REQ，D | WT. | |
| 11-125 | 1 1/8” – 2” | 7624-5103 | 4 | 36.00 | |
| 11-126 | 2 1/8”-3 1/4” | 7624-5104 | 5 | 40.00 | |
| 11-127 | 3 1/2”-4 1/2” | 7624-5105 | 6 | 44.00 | |
| ADD -B TO END OF PART NUMBER TO INCLUDE BOX | |||||
| REPLACEMENT PARTS FOR TYPE “T” SAFETY CLAMP | |||||
| AOT # | ITEM | DESCRIPTION | REFERENCE # | 的 SPARES | WT. |
| 11-101 | 1 | LINK ASSY. COMPLETE | 7624-B-7 | 4.25 | |
| 11-102 | 2 | LINK INTERMEDIATE | 7624-A-18 | 3 | 3.25 |
| 11-103 | 3 | INSERT w/COTTER | 7624-A-21 | 6 | .25 |
| 11-104 | 4 | COTTER f/INSERT | 900620-52 | .06 | |
| 11-105 | 5 | SPRING f/INSERT | 7624-B-21 | 6 | .06 |
| 11-106 | 6 | LINK PIN w/COTTER | 7624-C-5 | 3 | .75 |
| 11-107 | 7 | COTTER f/LINK PIN | 900620-36 | .06 | |
| 11-108 | 8 | END LINK (SCREW) | 7624-A-20 | 4.50 | |
| 11-109 | 9 | END LINK (PIVOT BLOCK) | 7624-A-19 | 3.50 | |
| 11-110 | 10 | END LINK PIN w/CHAIN | 7624-F-5 | 1 | 1.25 |
| 11-111 | 11 | SCREW | 7624-A-5 | 4.00 | |
| 11-112 | 12 | NUT | 7624-B-5 | 1.50 | |
| 11-113 | 13 | PIVOT BLOCK | 7624-A-5000 | 1.50 | |
| 11-114 | 14 | PIVOT BLOCK PIN | 7624-D-5 | .25 | |
| 11-115 | 15 | NUT WRENCH | 7624-A-25 | 4.00 | |
| 11-116 | 16 | HANDLE (CAST STEEL) | 7624-A-22 | 3.00 | |
| 11-117 | 17 | HANDLE LINK PIN w/COTTER | 7624-G-5 | .75 | |
| 11-118 | 18 | HANDLE KIT | 7624-A-5138 | 4.00 | |
| 11-119 | 19 | PIVOT BLOCK PIN WRENCH | 900533-12 | .12 | |
| 11-120 | N/P | SAFETY CLAMP BOX | 7624-A-9 | 45.00 | |
| 11-121 | N/P | 1 YEAR SPARE PARTS KIT | N/A | 1 | 13.00 |
| rev 805 | |||||
| ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® TYPE “T” SAFETY CLAMPS | |||||
| ** RECOMMENDED SPARE PARTS FOR 1 YEARS SERVICE | |||||
| AOT TYPE “A-MP” SAFETY CLAMPS | |||||
| AOT# | RANGE | REFERENCE # | # LINKS | GRIPPING DIES | WT. |
| A-MP-S | |||||
| 31-009 | 2 7/8” – 4 1/8” | 33030 | 7 | 8 | 128.00 |
| 31-010 | 4” – 5” | 33031 | 8 | 9 | 133.00 |
| A-MP-R | |||||
| 31-011 | 4 1/2” – 5 5/8” | 33011 | 7 | 8 | 120.00 |
| 31-012 | 5 1/2”-7” | 33012 | 8 | 9 | 130.00 |
| 31-013 | 6 3/4” – 8 1/4” | 33013 | 9 | 10 | 138.00 |
| 31-014 | 8”- 91/4” | 33014 | 10 | 11 | 147.00 |
| 31-015 | 91/4” – 101/2” | 33015 | 11 | 12 | 155.00 |
| A-MP-M | |||||
| 31-016 | 10 1/2” – 11 1/2” | 33016 | 12 | 13 | 163.00 |
| 31-017 | 11 1/2” – 12 1/2” | 33017 | 13 | 14 | 171.00 |
| 31-018 | 12 1/2”-13 5/8” | 33018 | 14 | 15 | 179.00 |
| 31-019 | 13 5/8” – 14 3/4” | 33019 | 15 | 16 | 187.00 |
| 31-020 | 14 3/4” – 15 7/8” | 31020 | 16 | 17 | 195.00 |
| A-MP-L | |||||
| 31-021 | 15 7/8” – 17” | 33021 | 17 | 18 | 215.00 |
| 31-022 | 17” – 18 1/2” | 33022 | 18 | 19 | 223.00 |
| 31-023 | 18 1/8”-19 3/8” | 33023 | 19 | 20 | 231.00 |
| A-MP-XL | |||||
| 31-024 | 19 3/8” – 20 3/8” | 33024 | 19 | 20 | 280.00 |
| 31-025 | 20 3/8” – 21 1/2” | 33025 | 20 | 21 | 288.00 |
| 31-032 | 21” -22 5/8” | 33032 | 21 | 22 | 296.00 |
| 31-033 | 22 5/8” – 23 3/4” | 33033 | 22 | 23 | 304.00 |
| 31-034 | 23 3/4” – 24 7/8” | 33034 | 23 | 24 | 312.00 |
| 31-035 | 24 7/8” – 26” | 33035 | 24 | 25 | 320.00 |
| 31-036 | 26” – 27 1/8” | 33036 | 25 | 26 | 328.00 |
| 31-039 | 29 3/8” – 30 1/2” | 33039 | 28 | 29 | 336.00 |
Handlingtoolsparts2
Posted in InventoryList.