Handlingtoolsparts1

AOT#	SLIP BODY SIZE	TYPE	REF#	WT.
03-114	41/2”	DU/REGULAR	7613-59	123.00
03-115	41/2”	DU/LONG	7613-64	150.00
03-116	51/2”	DU/REGULAR	7613-60	128.00
03-117	51/2”	DU/LONG	7613-65	162.00
03-118	7”	DU/REGULAR	7613-62	132.00
03-119	7”	DU/LONG	7313-66	192.00


REPLACEMENT PARTS FOR AOT “DU” REGULAR ROTARY SLIPS

AOT#	ITEM#	DESCRIPTION	•SPARES	#REQ.	REF.#	WT.
03-102	1	REAR HANDLE	1	1	7613-5195	5.00
03-105	2	HINGE PIN	2	2	7613-A-12	1.25
03-101	3	FRONT HANDLE	2	2	7613-A-157	4.00
03-104	4	LINER RETAINER KEY	3	3	7613-A-52	1.50
03-106	6	FRONT HANDLE PIN	2	2	7613-B-12	.25
03-107	7	REAR HANDLE PIN	1	1	7613-C-12	.38
03-108	8	HINGE SPRING ASSY.	2	2	7613-211	1.25
	9	INSERTS F/DU SEE PAGE 4		18
03-300	10	SAFETY FLEX HANDLE (UNIVERSAL)		3		5.00
	REPLACEMENT PARTS FOR AOT		“DU” LONG ROTARY SLIPS
AOT#	ITEM#	DESCRIPTION	•SPARES	#REQ.	REF.#	WT.
03-102	1	REAR HANDLE	1	1	7613-5195	5.00
03-105	2	HINGE PIN	2	2	7613-A-12	1.25
03-101	3	FRONT HANDLE	2	2	7613-A-157	4.00
03-103	5	LINER RETAINER KEY	3	3	7613-A-67	1.75
03-106	6	FRONT HANDLE PIN	2	2	7613-B-12	.25
03-107	7	REAR HANDLE PIN	1	1	7613-C-12	.38
03-108	8	HINGE SPRING ASSY.	2	2	7613-211	1.25
	9	INSERTS F/DU SEE PAGE 4		24
03-300	10	SAFETY FLEX HANDLE (UNIVERSAL)		3		5.00

★RECOMMENDED SPARE PARTS FOR 1 YEAR OPERATION
INSERTS FOR 4 1/2” “DU” ROTARY TYPE SLIPS AND FOR 4 1/2” “TS-100” SPIDER SLIPS

AOT #	DESCRIPTION	REF.#	WT.	AOT # (SPECIAL FULL FACE INSERTS)
03-120	4 1/2” X 4 1/2”	7613-A-81	.75	03-210
	4 1/2” X 4 3/8”	N/A	.80	03-213
	4 1/2” X 4 1/4”	N/A	.85	03-216
	4 1/2” X 4 1/8”	N/A	.90	03-219
03-121	4 1/2” X 4”	7613-FF-81	1.00	03-221
	4 1/2” X 3 3/4”	N/A	1.75	03-224
03-122	4 1/2” X 3 1/2”	7613-C-82	1.50	03-227
	4 1/2” X 3 3/8”	N/A	1.65	03-229
	4 1/2” X 3 1/4”	N/A	1.75	03-228
	4 1/2” X 3 1/8”	N/A	1.85	03-230
	4 1/2” X 3”	N/A	1.90	03-231
03-123	4 1/2” X 2 7/8”	7613-B-82	2.00	03-233
03-124	4 1/2” X 2 3/8”	7613-A-82	2.25	03-236
03-125	4 1/2” X 2 1/16”	7613-M-82	2.50	03-237
03-126	4 1/2” X 1.900”	7613-H-82	2.75	03-238
03-127	4 1/2” X 1.660”	N/A	2.80	03-239
INSERTS FOR 5 1/2”		“DU” ROTARY TYPE SLIPS AND 5 1/2” “TS-100” SLIPS
AOT#	DESCRIPTION	REF. #	WT.	AOT # (SPECIAL FULL FACE INSERTS)
	5 1/2” X 5 3/4”	N/A	.85	03-241
03-130	5 1/2” X 5 1/2”	7613-H-81	1.00	03-240
03-131	5 1/2” X 5”	7613-G-81	1.50	03-243
	5 1/2” X 4 3/4”	N/A	1.75	03-246
03-132	5 1/2” X 4 1/2”	7613-E-81	2.00	03-249
	5 1/2” X4 3/8”	N/A	2.10	03-247
	5 1/2” X 4 1/4”	N/A	2.15	03-252
	5 1/2” X 4 1/8”	N/A	2.20	03-255
03-133	5 1/2” X 4”	N/A	2.25	03-258
	5 1/2” X 3 3/4”	N/A	2.28	03-261
03-134	5 1/2” X 3 1/2”	7613-E-82	2.31	03-264
	5 1/2” X 3 1/4”	N/A	2.38	03-266
	5 1/2” X 3 1/8”	N/A	2.45	03-268
	5 1/2” X 3”	N/A	2.52	03-270
	5 1/2” X 2 7/8”	N/A	2.60	03-275
	5 1/2” X 2 3/8”	N/A	2.80	03-277
	INSERTS FOR 7” “DU”		ROTARY TYPE SLIPS
AOT#	DESCRIPTION	REF. #	WT.
03-140	7” X 7”	7613-EE-81	1.25
03-141	7” X 6 5/8”	7613-DD-81	1.75
03-146	7” X 5 7/8”	N/A	3.00
03-142	7” X 5 1/2”	7613-Z-81	3.25
03-143	7” X 5”	7613-Y-81	3.75
03-144	7” X 4 1/2”	7613-W-81	4.00

NOTE: “DU” REGULAR REQUIRES 18 INSERTS PER SET
“DU” LONG REQUIRES 24 INSERTS PER SET
4 1/2” & 5 1/2” “TS-100” SLIPS REQUIRE 12 INSERTS PER SET
1 SET INSERTS PER PIPE SIZE RECOMMENDED FOR 1 YEAR SPARES

All Access “SDML” and “SDXL” Slips are made of alloy steel and heat-treated for strength and long life.
These slips are then machined by strict quality control procedures for use in API standard bowls.

AOT “SD” TYPE ROTARY SLIPS LESS INSERTS

AOT#	SLIP BODY SIZE	TYPE	REF#	WT.
23-100	3 1/2” O.D.	SDML	15522-1	153.00
23-200	4 1/2” O.D.	SDML	15565-1	173.00
23-300	5” O.D.	SDML	15569-1	170.00
24-200	4 1/2” O.D.	SDXL	15562	182.00
24-100	5” O.D.	SDXL	15566	193.00
24-300	5 1/2” O.D.	SDXL	15570	190.00

AOT “SD” TYPE ROTARY SLIPS WITH INSERTS

AOT#	SLIP SIZE/PIPE SIZE	TYPE	REF#	WT.
23-135	31/2” x 3 1/2”	SDML	15522	180.00
23-127	31/2” x 27/8”	SDML	15523	188.00
23-123	31/2” x 23/8”	SDML	15524	193.00
23-245	41/2” x 4 1/2”	SDML	15565	188.00
23-240	41/2” x 4”	SDML	15564	199.00
23-235	41/2” x 3 1/2”	SDML	15563	207.00
23-500	5” x 5”	SDML	15569	185.00
23-545	5” x 41/2”	SDML	15568	196.00
23-540	5” x 4”	SDML	15567	204.00
23-455	51/2” x 5 1/2”	SDML	15573	181.00
23-450	51/2” x 5”	SDML	15572	192.00
23-445	51/2” x 4 1/2”	SDML	15571	200.00
24-245	41/2” x 4 1/2”	SDXL	15513	205.00
24-240	41/2” x 4”	SDXL	15514	219.00
24-235	41/2” x 3 1/2”	SDXL	15515	229.00
24-150	5” x 5”	SDXL	15516	213.00
24-145	5” x 4 1/2”	SDXL	15517	227.00
24-140	5” x 4”	SDXL	15518	237.00
24-355	51/2” x 5 1/2”	SDXL	15519	210.00
24-350	51/2” x 5”	SDXL	15520	224.00
24-345	51/2” x 4 1/2”	SDXL	15521	234.00

REPLACEMENT PARTS FOR “SD” TYPE ROTARY SLIPS


AOT#	ITEM#	DESCRIPTION	SIZE	#REQ.	REF.#	WT.	SPARES*
23-150	1	LEFT HANDLE	ALL	1	3768	3.50	1
14-103	2	REAR HANDLE	ALL	1	3766	4.00	1
23-151	3	RIGHT HANDLE	ALL	1	3767	3.50	1
14-105	4	HANDLE PIN w/WASHER & COTTER	ALL	3	3769	.50	3
23-104	5	INSERT RETAINER RING	3 1/2”	3	3738	1.00	3
23-105	5	INSERT RETAINER RING	4 1/2”	3	3739	1.00	3
23-106	5	INSERT RETAINER RING	5”	3	3741	1.00	3
23-107	5	INSERT RETAINER RING	5 1/2”	3	3740	1.00	3
23-108	5	INSERT RETAINER RING	7”	3	3742	1.00	3
23-109	6	INSERT RETAINER SCREW & NUT	ALL	6	3737	.02	12
23-110	7	INSERT SEE CHART
23-111	8	HINGE PINS w/COTTER	ALL	2	2192	1.20	2
23-112	9	SAFETY FLEX HANDLE	ALL	3	N/A	4.00

★RECOMMENDED SPARE PARTS FOR 1 YEAR SERVICE

	INSERTS FOR “SDML”		& “SDXL”	SLIPS
AOT#	SIZE	TYPE	REF#	WI//SEI SDML/SDXL
23-155	3 1/2” x 31/2”	BASIC	2162	10.00
23-156	3 1/2” x 2 7/8”	REDUCER	2161	15.00
23-157	3 1/2” x 23/8”	REDUCER	2160	20.00
23-158	4 1/2” x 41/2”	BASIC	2165	15.00	/	18.00
23-159	4 1/2” x 4”	REDUCER	2164	23.00	/	27.00
23-160	4 1/2” x 31/2”	REDUCER	2163	30.00	/	36.00
23-161	5” x 5”	BASIC	2167	15.00	/	18.00
23-162	5” x 4 1/2”	REDUCER	2166	23.00	/	27.0
23-163	5” x 4”	REDUCER	2168	30.00	/	36.00
23-164	5 1/2” x 51/2”	BASIC	2170	15.00	/	18.00
23-165	5 1/2” x 5”	REDUCER	2169	23.00	/	27.00
23-163	5 1/2” x 41/2”	REDUCER	2168	30.00	/	36.00
23-166	7” x 7”	BASIC	2173	20.00	/	26.00
23-167	7” x 6 5/8”	REDUCER	2172	25.00	/	41.00

ALL “SDXL” SLIPS EXCEPT 7” TAKE 54 INSERTS
3 1/2” “SDML “SLIPS TAKE 30 INSERTS
ALL OTHER “SDML” SLIPS EXCEPT 7” TAKE 45 INSERTS
7” “SDXL” SLIPS TAKE 72 INSERTS
7” “SDML” SLIPS TAKE 60 INSERTS

RECOMMENDED SPARES INCLUDE 3 SETS INSERTS FOR EACH PIPE SIZE TO BE RUN
REPLACEMENT PARTS FOR WOOLLEY® TYPE “A” DRILL COLLAR SLIPS

AOT#	ITEM#	DESCRIPTION	REF#	# REQ.	WT.
08-102	1	HANDLE	707-000-0200	3	2.5
08-103	2	HANDLE PIN	707-000-3000	3	.15
20-101	3	HINGE PIN	707-000-0100	•	1.15
20-102	4	INSERT RET. PIN	707-000-0600	_•	.40
20-103	5	INSERT	707-000-0500	_•	.25

REPLACEMENT PARTS FOR VARCO® PS-15 & PS-16 SLIPS

AOT#	DESCRIPTION	REF. #	# REQ.	WT.
34-700	3 1/2” GUIDE RING	79011-1	1	98.00
34-701	4” & 4 1/2” GUIDE RING	79011-2	1	106.00
34-702	5” GUIDE RING	79014-3	1	80.00
34-703	5 1/2” GUIDE RING	79014-4	1	72.00
REPLACEMENT PARTS FOR ACCESS TYPE “B” ROTARY SLIPS

AOT#	ITEM#	DESCRIPTION	REF#	# REQ.	WT.
19-101	1	HINGE PIN	737-000-0500	2	1.12
19-102	2	RIGHT HANDLE	737-000-0300	1	5.35
19-103	3	HANDLE PIN	737-000-0400	3	.25
19-104	4	REAR HANDLE	737-000-0200	1	5.50
19-105	5	LEFT HANDLE	737-000-0100	1	5.35
19-106	6	INSERT RET. PIN	737-000-0600	3	.30
		INSERTS FOR ACCESS TYPE “B”		ROTARY SLIP
AOT#		DESCRIPTION	REF#	# REQ.	WT.
19-250		4-1/2” X 4-1/2”	757-044-0144	*	.85
19-251		4-1/2” X 4”	757-044-0140		1.20
19-252		4-1/2” X 3-1/2”	757-044-0134		1.75
19-253		4-1/2” X 2-7/8”	757-044-0127		2.00
19-254		4-1/2” X 2-3/8”	757-044-0123		2.15
19-255		4-1/2” X 2-1/16”	N/A	*	2.45

* LONG REQUIRES 24 INSERTS PER SET
REGULAR REQUIRES 18 INSERTS PER SET
AOT “C1” TYPE DRILL COLLAR SLIP


The AOT “C-1” Drill Collar Slip has a multi-segment design that allows it to hinge so that it fits all drill collars within the slip’s
size range. The AOT “C-1” Slip Segments are made of alloy steel which are heat-treated for strength and wear resistance.

AOT TYPE “C-1” DRILL COLLAR SLIPS COMPLETE

AOT #	DRILL COLLAR SIZE / SLIP RECESS	REFERENCE	WT.
08-111	3” – 4 1/2”	7638-5104	112.
08-112	41/4” – 53/4”	7638-5105	122.
08-113	51/2” – 7”	7638-5106	134.
08-114	6 3/4” – 81/4”	7638-5107	118.
08-115	81/2” – 10”	7638-5108	98.
08-116*	10” – 11 1/4”	7638-5109	158.
08-117 **	11 1/4” – 12 3/4”	7638-5110	210.

ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® “C-1” DRILL COLLAR SLIPS

* FITS NO. 2 INSERT BOWL
** FITS NO. 1 INSERT BOWL
REPLACEMENT PARTS FOR “C-1” DRILL COLLAR SLIPS


AOT #	ITEM	#DESCRIPTION **	SPARES	SIZE	REQ*	REF. #	WT.
08-102	1	HANDLE	3	3” – 10”	3	7638-A-78	2.50
08-102	1	HANDLE	4	10” – 123/4”	4	7638-A-78	2.50
08-107	2	BODY SEGMENT (RIGHT HAND)		3” – 4 1/2”	1	7638-5099-11	10.75
08-120	2	BODY SEGMENT (RIGHT HAND)		4 1/4” – 5 3/4”	1	7638-5100-11	9.25
08-124	2	BODY SEGMENT (RIGHT HAND)		51/2” – 7”	1	7638-5101-11	8.25
08-129	2	BODY SEGMENT (RIGHT HAND)		6 3/4” – 8 1/4”	1	7638-5102-11	7.00
08-133	2	BODY SEGMENT (RIGHT HAND)		8 1/2” – 10”	1	7638-5103-11	5.75
08-129	2	BODY SEGMENT (RIGHT HAND)		10” – 11 1/4”	1	7638-5102-11	7.00
08-124	2	BODY SEGMENT (RIGHT HAND)		11 1/4” – 12 3/4”	1	7638-5101-11	8.25
08-108	3	BODY SEGMENT (INTERMEDIATE)		3” – 4 1/2”	6	7638-5099-10	10.75
08-121	3	BODY SEGMENT (INTERMEDIATE)		4 1/4” – 5 3/4”	8	7638-5100-10	9.25
08-125	3	BODY SEGMENT (INTERMEDIATE)		51/2” – 7”	10	7638-5101-10	8.25
08-130	3	BODY SEGMENT (INTERMEDIATE)		6 3/4” – 8 1/4”	10	7638-5102-10	7.00
08-134	3	BODY SEGMENT (INTERMEDIATE)		8 1/2” – 10”	10	7638-5103-10	5.75
08-130	3	BODY SEGMENT (INTERMEDIATE)		10” – 11 1/4”	15	7638-5102-10	7.00
08-125	3	BODY SEGMENT (INTERMEDIATE)		11 1/4” – 12 3/4”	17	7638-5101-10	8.25
08-109	4	BODY SEGMENT (LEFT HAND)		3” – 4 1/2”	1	7638-5099-12	10.75
08-122	4	BODY SEGMENT (LEFT HAND)		4 1/4” – 5 3/4”	1	7638-5100-12	9.25
08-126	4	BODY SEGMENT (LEFT HAND)		51/2” – 7”	1	7638-5101-12	8.25
08-131	4	BODY SEGMENT (LEFT HAND)		6 3/4” – 8 1/4”	1	7638-5102-12	7.00
08-135	4	BODY SEGMENT (LEFT HAND)		8 1/2” – 10”	1	7638-5103-12	5.75
08-131	4	BODY SEGMENT (LEFT HAND)		10” – 11 1/4”	1	7638-5102-12	7.00
08-126	4	BODY SEGMENT (LEFT HAND)		11 1/4” – 12 3/4”	1	7638-5101-12	8.25
08-103	5	HANDLE PIN w/COTTER	1	3” – 10”	3	7638-E-2	.15
08-103	5	HANDLE PIN w/COTTER	2	10” – 123/4”	4	7638-E-2	.15
08-104	6	LINER KEEPER w/BOLT & WASHER	4	3” – 4 1/2”	8	7638-5113	1.00
08-104	6	LINER KEEPER w/BOLT & WASHER	5	4 1/4” – 5 3/4”	10	7638-5113	1.00
08-104	6	LINER KEEPER w/BOLT & WASHER	6	5 1/2” – 10”	12	7638-5113	1.00
08-104	6	LINER KEEPER w/BOLT & WASHER	8	10” – 11 1/4”	17	7638-5113	1.00
08-104	6	LINER KEEPER w/BOLT & WASHER	9	11 1/4” – 12 3/4”	19	7638-5113	1.00
08-105	7	RENEWABLE LINER		3” – 12 3/4”	*	7638-116	1.00
08-101	8	HINGE PIN w/COTTER	3	3” – 4 1/2”	7	7638-B-59	1.15
08-101	8	HINGE PIN w/COTTER	3	4 1/4” – 5 3/4”	9	7638-B-59	1.15
08-101	8	HINGE PIN w/COTTER	3	5 1/2” – 8 1/4”	11	7638-B-59	1.15
08-106	8	HINGE PIN w/COTTER	3	8 1/2” – 10”	11	7638-B-59	.85
08-101	8	HINGE PIN w/COTTER	4	10” – 11 1/4”	16	7638-B-59	1.15
08-101	8	HINGE PIN w/COTTER	4	11 1/4” – 12 3/4”	18	7638-B-59	1.15
08-136	9	SAFETY FLEX HANDLE		ALL	A/R	N/A	5.00

ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® “C-1” DRILL COLLAR SLIPS
*SAME QUANTITY AS ITEM #6
AOT “DCS” TYPE DRILL COLLAR SLIPS


The AOT “DCS” Type Drill Collar Slip has a multi-segment design to give a full wrap-around to insure a proper slip setting.
The slips are made of alloy steel and heat-treated for strength and long life.

AOT “DCS” DRILL COLLAR SLIPS COMPLETE

AOT#	DRILL COLLAR SIZE/ SLIP RECESS	TYPE SLIP	REF#	TOTAL SEGMENTS	WT.
16-120	3” – 4”	DCS-S	2572	7	112
16-121	4” – 4 7/8”	DCS-S	2573	7	103
16-122	4 1/2” – 6”	DCS-R	2552	9	120
16-123	5 1/2” – 7”	DCS-R	2550	9	112
16-125	5 1/2” – 7”	DCS-L	2501	11	172
16-126	6 3/4” – 8 1/4”	DCS-L	2503	11	154
16-127	8” – 91/2”	DCS-L	2507	12	173
16-128	8 1/2” – 10”	DCS-L	2530	13	185
16-129	9 1/4” – 11 1/4”	DCS-L	2508	14	198
16-130	11” – 12 3/4”	DCS-L	2534	17	213
16-131	12” – 14”	DCS-L	2536	17	207

NOTE: SLIP SIZES 3” – 9 1/2” FOR USE IN API OR #3 BOWL
SLIP SIZES 8 1/2” – 11 1/4” FOR USE IN #2 BOWL
SLIP SIZES 11” – 14” FOR USE IN #1 BOWL

ALL PARTS ARE INTERCHANGEABLE WITH VARCO® “DCS” TYPE DRILL COLLAR SLIPS
REPLACEMENT PARTS FOR AOT “DCS” DRILL COLLAR SLIPS


AOT#	ITEM#	DESCRIPTION	* SPARES	SIZE	#REQ.	REF#.	WT.
14-104	1	FRONT HANDLE	2	3” – 14”	2	3765	3.50
16-102	2	LEFT HAND SEGMENT f/DCSS		3” – 4 7/8”	1	2569	11.00
16-105	2	LEFT HAND SEGMENT f/DCSR		4 1/2” – 7”	1	2555	10.00
16-108	2	LEFT HAND SEGMENT f/DCSL		5 1/2” – 14”	1	2511	12.00
16-103	3	INTERMEDIATE SEGMENT f/DCSL		3” – 4 7/8”	5	2570	11.00
16-106	3	INTERMEDIATE SEGMENT f/DCSR		4 1/2” – 7”	7	2556	10.00
16-109	3	INTERMEDIATE SEGMENT f/DCSL		5 1/2”-8 1/4”	9	2512	12.00
16-109	3	INTERMEDIATE SEGMENT f/DCSL		8” – 9 1/2”	10	2512	12.00
16-109	3	INTERMEDIATE SEGMENT f/DCSL		8 1/2” – 10”	11	2512	12.00
16-109	3	INTERMEDIATE SEGMENT f/DCSL		9 1/4” – 11 1/4”	12	2512	12.00
16-109	3	INTERMEDIATE SEGMENT f/DCSL		11-14”	15	2512	12.00
16-104	4	RIGHT HAND SEGMENT f/DCSS		3” – 4 7/8”	1	2568	11.00
16-107	4	RIGHT HAND SEGMENT f/DCSR		4 1/2” – 7”	1	2554	10.00
16-110	4	RIGHT HAND SEGMENT f/DCSL		5 1/2” – 14”	1	2510	12.00
14-103	5	REAR HANDLE	1	3” – 10”	1	3766	4.00
14-103	5	REAR HANDLE	1	9 1/4” – 14”	2	3766	4.00
14-105	6	HANDLE PIN	3	3” – 10”	3	3769	.50
14-105	6	HANDLE PIN	3	9 1/4” – 14”	4	3769	.50
14-106	7	HINGE PIN f/DCSS	4	3” – 4 7/8”	6	2525	.70
14-106	7	HINGE PIN f/DCSR	4	4 1/2” – 7”	8	2525	.70
16-112	7	HINGE PIN f/DCSL	4	5 1/2”-8 1/4”	10	2520	.70
16-112	7	HINGE PIN f/DCSR	4	8” – 9 1/2”	11	2520	.70
16-112	7	HINGE PIN f/DCSR	4	8 1/2” – 10”	12	2520	.70
16-112	7	HINGE PIN f/DCSR	4	9 1/4” – 11 1/4”	13	2520	.70
16-112	7	HINGE PIN f/DCSR	4	11” – 14”	16	2520	.70
23-112	8	SAFETY FLEX HANDLE	3	ALL	A/R	N/A	4.00

* RECOMMENDED SPARE PARTS FOR 1 YEAR OF OPERATION

BUTTON INSERTS FOR AOT “DCS” DRILL COLLAR SLIPS

AOT#	SLIP TYPE	SIZE	REF#.	WT/SET	QTY.
14-628	DCS S	3” – 4”	2628	13.00	49
14-620	DCS S	4”- 41/2”	2620	8.00	49
14-628	DCS R	41/2” – 6”	2628	16.00	63
14-620	DCS R	51/2” – 7”	2620	11.00	63
14-513	DCS L	51/2” – 7”	2513	19.00	88
14-630	DCS L	6 3/4” – 9 1/2”	2630	15.00	88
14-630	DCS L	8”- 91/2”	2630	16.00	96
14-627	DCS L	81/2” – 10”	2627	26.00	104
14-630	DCS L	91/4” – 11 1/4”	2630	19.00	112
14-625	DCS L	11” – 12 3/4”	2625	20.00	136
14-630	DCS L	12” – 14”	2630	22.00	136

rev 805

ALL PARTS ARE INTERCHANGEABLE WITH VARCO® “DCS” DRILL COLLAR SLIPS
RECOMMENDED SPARE PARTS INCLUDE 2 SETS OF INSERTS FOR EACH SLIP SIZE

AOT “UC-3” CASING SLIPS


The AOT “UC-3” Type Casing Slip has a 3” taper designed with a single liner per segment and a liner keeper assembly
with bolt and washer. It has a size range of 9-5/8” through 42” and is accomplished with 2 sizes of slips – 9-5/8” through

10-3/4” and

AOT#	SLIP 纽ZE	W / INSERTS FOR O.D.	INTER. SEG. / PN	R.H. SEG. / PN	L.H. SEG. / PN	WT. LBS.
7704-5028	10 3/4”	10 3/4” O.D.	8 / 7704-A-31	1 / 7704-A-32	1 / 7704-A-33	160
7704-5029	10 3/4	9 5/8” O.D	8 / 7704-A-31	1 / 7704-A-32	1 / 7704-A-33	180
7704-103	10 3/4”	LESS LINERS	8 / 7704-A-31	1 / 7704-A-32	1 / 7704-A-33	130
7704-5025	13 3/8”	13 3/8” O.D.	10 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	195
7704-5026	13 3/8”	12 3/4” O.D.	10 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	222
7704-5027	13 3/8”	11 3/4” O.D.	10 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	228
7704-104	13 3/8”	LESS LINERS	10 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	153
7704-5036	16”	16” O.D.	12 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	226
7704-106	16”	LESS LINERS	12 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	176
7704-5034	20”	20” O.D.	15 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	283
7704-5035	20”	18 5/8” O.D.	15 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	325
7704-110	20”	LESS LINERS	15 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	223
7704-5001	24”	24” O.D.	17 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	312
7704-5002	24”	22 1/2” O.D.	17 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	359
7704-5009	24”	LESS LINERS	17 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	246
7704-5006	26”	26” O.D.	19 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	325
7704-5010	26”	LESS LINERS	19 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	252
7704-5005	30”	30” O.D.	22 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	367
7704-5011	30”	LESS LINERS	22 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	283
7704-5007	36”	36” O.D.	26 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	437
7704-5013	36”	LESS LINERS	26 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	340
7704-5019	42”	42” O.D.	30 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	495
7704-5018	42”	LESS LINERS	30 / 7704-A-35	1 / 7704-A-36	1 / 7704-A-37	375

REPLACEMENT PARTS FOR “UC-3” CASING SLIPS

SLIP SIZE	10 3/4，， NO.	13 3/8，， NO.	16” 20” NO. NO.	24” 26” NO. NO.	30” 36” NO. NO.	42” NO.	PART WT. NO. LBS.
HANDLE	3	4	4 4	4 4	4 6	6	7704-A-17 5.5
HANDLE PIN W/COTTER	3	4	4 4	4 4	4 6	6	7704-A-16 .5
HINGE PIN W/COTTER	9	11	13 16	18 20	23 27	31	7704-B-16 .375
KEEPER ASSY. W/BOLT & WAS. 10		12	14 17	19 21	24 28	32	7704-5024 .25
BOLT & WASHER F/KEEPER			AS REQUIRED				7704-5024-B .08
LINER RETAINER W/COTTER			NOT REQUIRED FOR AOT UC-3 SEGMENT				7704-A-29 .25
LINERS FOR UC-3 & UC-4 CASING SLIPS
SLIP SIZE	PIPE SIZE WT. LBS.	P/N	PIPE SIZE WT. LBS.	P/N	PIPE SIZE WT. LBS.	P/N	# REQ.
10 3/4”	10 3/4” 3 LBS.	7704-A-8	9 5/8” 5 LBS.	7704-A-9			10
13 3/8”	13 3/8”	7704-A-38 3.5 LBS.	12 3/4” 5.75 LBS.	7704-A-92	11 3/4” 6.25 LBS.	7704-A-39 12
16”	16” 3.5 LBS.	7704-A-99					14
20”	20” 3.5 LBS.	7704-A-99	18 5/8” 6 LBS.	7704-A-5000			17
24”	24” 3.5 LBS.	7704-A-99	22 1/2” 6 LBS.	7704-A-5000			19
26”-42”	26” -42” 3.5 LBS	7704-A-100					AS REQUIRED

AOT TYPE “CMSXL” & “CMS-3” CASING SLIPS


The AOT “CMSXL” & “CMS-3” Casing Slips have a multi-segment design which gives a full wrap-around to help prevent
damage to casing. By adding or subtracting segments & inserts the slip can accommodate 6 5/8” – 30” O.D. casing. The
segments are made of alloy steel and are heat-treated for strength and wear resistance, then machined to strict quality

controlled standards.

AOT “CMSXL” CASING SLIPS COMPLETE

AOT#	CASING O.D.	REF.# WT.	COMP. TOTAL SEG.		HINGE PINS	INSERTS
14-111	6 5/8”	5315	196	12	11	14-628-144
14-112	7”	5301	184	12	11	14-619-144
14-113	7 5/8”	5303	166	12	11	14-630-144
14-114	8 5/8”	5305	181	13	12	14-630-156
14-115	9 5/8”	5307	192	14	13	14-630-168
14-116	10 3/4”	5309	209	15	14	14-630-180
14-117	11 3/4”	5311	260	17	16	14-627-204
14-118	13 3/8”	5313	247	18	17	14-630-216
14-119	16”	5325	308	21	20	14-631-252
14-120	18 5/8”	5333	367	25	24	14-626-300
14-121	20”	5329	383	26	25	14-631-312
14-122	24”	5331	443	30	29	14-631-360
14-123	26”	5346	486	33	32	14-631-396
14-124	30”	5342	546	37	36	14-631-444
	NOTE: ALL SLIPS 9 5/8” AND LARGER ARE FURNISHED WITH 4 HANDLES. ALL PARTS ARE INTERCHANGEABLE WITH VARCO® TYPE “CMSXL” CASING SLIPS.
		AOT “CMS-3”		TAPER CASING SLIPS
AOT#	CASING O.D.	WT. COMP.		TOTAL SEG.	HINGE PINS	INSERTS
14-134	9 5/8”	178		14	13	14-513-168
14-135	10 3/4”	194		15	14	14-630-180
14-136	11 3/4”	243		17	16	14-627-204
14-137	13 3/8”	229		18	17	14-630-216
14-138	16”	287		21	20	14-631-252
14-139	18 5/8”	342		25	24	14-626-300
14-140	20”	357		26	25	14-631-312
14-141	24”	413		30	29	14-631-360
14-142	26”	453		33	32	14-631-396
14-143	30”	509		37	36	14-631-444
		ALL PARTS ARE INTERCHANGEABLE W/”CMSXL”			EXCEPT SEGMENTS
					A	ACCESS

14-106	2	HINGE PIN w/COTTER	2525	2	.60
14-100	3	RIGHT HAND SEGMENT f/CMSXL SLIP	5320		12.00
14-148	3	RIGHT HAND SEGMENT f/CMS-3” SLIP	N/A		11.00
14-107	4	INTERMEDIATE SEGMENT f/CMSXL SLIP	5322		12.00
14-149	4	INTERMEDIATE SEGMENT f/CMS-3” SLIP N/A	N/A		11.00
14-101	5	LEFT HAND SEGMENT f/CMSXL SLIP	5321		12.00
14-150	5	LEFT HAND SEGMENT f/CMS-3” SLIP	N/A		11.00
14-104	6	FRONT HANDLE	3765	2	3.50
14-103	7	REAR HANDLE	3766	1	4.00
14-109	8	HINGE SPACER	11944		4.00

ALL PARTS ARE INTERCHANGEABLE WITH VARCO® TYPE “CMSXL” SLIPS
** RECOMMENDED SPARE PARTS FOR 1 YEAR OPERATION
*FOR RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE

AOT “CPS” CONDUCTOR PIPE SLIPS

AOT #	PIPE O.D.	WT. COMPLETE	TOTAL SEGMENTS	HINGE SPACERS	INSERTS
14-244	24，	276	13	12	14-631-156
14-266	26，	296	14	13	14-631-168
14-330	30，	319	16	15	14-631-192

NOTE: ALL PARTS ARE INTERCHANGEABLE WITH “CMSXL，，SLIP

REPLACEMENT PARTS FOR “LYT” SLIP TYPE ELEVATOR

AOT#	ITEM #	DESCRIPTION	# REQ.	WT.
E28786	1	INSERT RETAINER PLATE	4	.13
E28787	2	INSERT RETAINER SCREW	2	.13
E28785	3	SETTING PLATE BOLT	2	.25
E339369-13	4	SETTING PLATE WASHER	2	.06
E28760	5	SLIP BOLT	4	.25
E28761	6	SLIP SPRING	4	.15

SETTING PLATES
AOT #	ITEM #	DESCRIPTION	# REQ.	WT.
E28782	7	2 1/16” SETTING PLATE	1	2.25
E28737	7	2” SETTING PLATE	1	2.35
E28783	7	1 1/2”（1.900”）SETTING PLATE	1	3.00
E28784	7	1 1/4”（1.660”）SETTING PLATE	1	3.10
E28736	7	1”（1.315”）SETTING PLATE	1	3.15
E28735	7	3/4”（1.050”）SETTING PLATE	1	3.20

INSERTS
AOT #	ITEM #	DESCRIPTION	# REQ.	WT.
E28772	8	2 1/16” & 2” LYT INSERT	8	.25
E28775	8	1 1/2”（1.900”）LYT INSERT	8	.25
E28778	8	1 1/4”（1.660”）LYT INSERT	8	.25
E28749	8	1”（1.315”）LYT INSERT	8	.25
E29370	8	3/4”（1.050”）LYT INSERT	8	.25
	AOT 40 TON MYT SLIP TYPE ELEVATOR
AOT #	DESCRIPTION SIZE OF LINKS	WT.
E29328	MYT ELEVATOR COMPLETE LESS SLIP ASSEMBLY. 1 1/4” – 2 3/4”	148.00


MYT SLIP ASSEMBLIES

AOT#	DESCRIPTION	WT.
E29343-1	2 7/8” X 2 7/8” MYT SLIP ASSEMBLY	44.00
E29343-2	2 7/8” X 2 3/8” MYT SLIP ASSEMBLY	46.00
E29343-3	2 7/8” X 2 1/16” MYT SLIP ASSEMBLY	47.25
E29343-4	2 7/8” X 2” MYT SLIP ASSEMBLY	47.50
E29343-5	2 7/8” X 1 1/2”（1.900”）MYT SLIP ASSEMBLY	48.75
E29343-6	2 7/8” X 1 1/4”（1.660”）MYT SLIP ASSEMBLY	49.75
E29343-7	2 7/8” X 1”（1.315”）MYT SLIP ASSEMBLY	49.75
E29343-8	2 7/8” X 3/4”（1.050”）MYT SLIP ASSEMBLY.	51.00
E29343-10-S	2 7/8” MYT SLIP SEGMENTS ONLY (MATCHED SET OF 4)	31.00


rev 805	18	www.accessoiltools.com

MYT REPLACEMENT PARTS

AOT#	ITEM #	DESCRIPTION	**SPARES	# REQ.	WT.
E29333	3	HINGE PIN		1	4.00
E30652	4	LATCH		1	10.00
E29334	5	LATCH PIN		1	4.00
E29338	6	LATCH SPRING	2	1	.50
E30653	7	LATCH LOCK		1	2.00
E29335	8	LATCH LOCK PIN	2	1	.50
E29349	9	LATCH LOCK SPRING	2	1	.25
E30841	10	LATCH LOCK DOOR PIN		1	.50
E947128-120	11	LATCH PIN RETAINER	2	1	1.50
E947128-172	12	LATCH LOCK PIN RETAINER	2	1	.50
E940308-1	13	GREASE FITTING		1	.10
E30708	N/P	LATCH & LATCH LOCK ASSY.		1	12.88
E29337	14	LINK BLOCK		2	1.00
E29359	15	USE P/N E939009-65		2	.13
E939009-65	16	UPPER & LOWER LINK BLOCK PIN	2	2	.45
E939484-7	17	LINK BLOCK NUT	2	2	.20
E939672-18	18	COTTER PIN	2	2	.10
E29336	19	SLIP BOLT	4	4	.75
E29340	20	SLIP SPRING	8	4	.25
E29347	21	SETTING RING SCREW	4	2	.25
E939370-13	22	SETTING PLATE WASHER	4	2	.06
E939098-15	23	INSERT RETAINER SCREW	4	2	.13
E29344	25	INSERT RETAINER PLATE	4		.50

MYT INSERTS

AOT#	ITEM #	DESCRIPTION	# REQ.	WT.
E24773	24	2 7/8” X 2 7/8” INSERT	8	.75
E29255	24	2 7/8” X 2 3/8” INSERT	8	1.00
E29256	24	2 7/8” X 2 1/16” & 2” INSERT	8	1.13
E29257	24	2 7/8” X 1 1/2”（1.900”）INSERT	8	1.25
E29258	24	2 7/8” X 1 1/4”（1.660”）INSERT	8	1.38
E29259	24	2 7/8” X 1”（1.315”）INSERT	8	1.44
E29259-1	24	2 7/8” X 3/4”（1.050”）INSERT	8	1.50

RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO BE RUN

MYT SETTING RINGS

AOT#	ITEM #	DESCRIPTION	WT.
E29348	28	2 7/8” MYT SETTING RING	6.50
E29345	28	2 3/8” MYT SETTING RING	6.63
E29350	28	2 1/16” MYT SETTING RING	7.00
E29351	28	2” MYT SETTING RING	7.10
E29352	28	1 1/2”（1.900”）SETTING RING	7.35
E29353	28	1 1/4”（1.660”）MYT SETTING RING	7.50
E29354	28	1”（1.315”）MYT SETTING RING	7.90
E29354-1	28	3/4”（1.050”）MYT SETTING RING	8.05

RECOMMENDED SPARES INCLUDE 2 SETTING RINGS FOR EACH PIPE SIZE TO BE RUN

AOT YT 75 TON SLIP TYPE ELEVATOR

AOT#	DESCRIPTION	SIZE OF LINKS	WT.
E23105	YT ELEVATOR COMPLETE LESS SLIP ASSY.	2 1/4” – 2 3/4”	355.00


AOT#	DESCRIPTION	WT.
E23108-5	3 1/2” x 3 1/2” YT SLIP ASSEMBLY	64.00
E23108-3	3 1/2” x 2 7/8” YT SLIP ASSEMBLY	76.00
E23108-4	2 7/8” x 2 7/8” YT SLIP ASSEMBLY	76.00
E23108-6	2 7/8” x 2 3/8” YT SLIP ASSEMBLY	79.00
E23108-7	2 7/8” x 2 1/16” YT SLIP ASSEMBLY	81.00
E23108-8	2 7/8” x 2”（2.000”）YT SLIP ASSEMBLY	82.00
E23108-9	2 7/8” x 1 1/2”（1.900”）YT SLIP ASSEMBLY	83.50
E23108-10	2 7/8” x 1 1/4”（1.660”）YT SLIP ASSEMBLY	85.50
E23108-11	2 7/8” x 1”（1.315”）YT SLIP ASSEMBLY	86.50
E23108	3 1/2” YT SLIP SEGMENTS ONLY (MATCHED SET OF 4)	51.00
E23108-2	2 7/8” YT SLIP SEGMENTS ONLY (MATCHED SET OF 4)	51.00


YT REPLACEMENT PARTS

AOT#	ITEM #	DESCRIPTION **SPARES		# REQ.	WT.
E23116-1	3	HINGE PIN		1	4.13
E15348	4	LATCH		1	27.00
E24182	5	LATCH PIN		1	5.00
E12978	6	LATCH SPRING	2	1	.63
E12946	7	LATCH CAM		1	1.50
E12972	8	LATCH LOCK		1	3.50
E13530	9	LATCH LOCK PIN	2	1	.63
E12529	10	DOOR LUG PIN		1	.65
E29464	11	LATCH PIN RETAINER	2	1	.20
E940308-1	12	GREASE FITTING		1	.10
E940308-8	13	GREASE FITTING		1	.10
E9519	14	LINK BLOCK		2	5.50
E8151	15	UPPER LINK BLOCK PIN, NUT & COTTER		2	.50
E8145	16	LINK BLOCK BOLT	2	2	1.19
E8150	17	LINK BLOCK NUT	2	2	.25
E939672-19	18	COTTER PIN	2	2	.10
E23115	19	SLIP BOLT	4	4	1.25
E23113	20	SLIP SPRING	8	4	.25
E23630	21	GUIDE PLATE		1	4.00
E939098-75	22	GUIDE PLATE SCREW	2	2	.25
E939352-64	23	GUIDE PLATE LOCKWASHER	2	2	.15
E27697	24	SETTING PLATE BOLT	8	4	.25
E27532	25	INSERT RETAINER SCREW	8	4	.06
E27546	26	SETTING RING RETAINER (3 1/2”）	2	2	.13
E27507	26	SETTING RING RETAINER (2 7/8”）	2	2	.13
E27696	27	RUBBER BUSHING	8	4	.06
E24507	28	INSERT SPACER (3 1/2”）	8	8	.13
E24508	28	INSERT SPACER ( 2 7/8”）	4	4	.25
E27530	31	INSERT RETAINER (3 1/2”）		4	.13
E27451	31	INSERT RETAINER (2 7/8”）		4	.25
YT INSERTS
AOT#	ITEM #	DESCRIPTION		# REQ.	WT.
E24774	30	3 1/2” X 3 1/2” INSERT		24	.50
E30358	30	3 1/2” X 2 7/8” INSERT		24	.75
E24773	30	2 7/8” X 2 7/8” INSERT		12	.75
E29255	30	2 7/8” X 2 3/8” INSERT		12	1.00
E29256	30	2 7/8” X 2 1/16” & 2” INSERT		12	1.20
E29257	30	2 7/8” X 1 1/2”（1.900”）INSERT		12	1.25
E29258	30	2 7/8” X 1 1/4”（1.660”）INSERT		12	1.38
E29259	30	2 7/8” X 1”（1.315”）INSERT		12	1.45

RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO RUN

YT SETTING RINGS

AOT#	ITEM #	DESCRIPTION	WT.
E27813	33	3 1/2” YT SETTING RING	3.13
E27695	33	2 7/8” YT SETTING RING	3.56
E27694	33	2 3/8” YT SETTING RING	4.00
E27812	33	2 1/16” YT SETTING RING	4.25
E28821	33	2” YT SETTING RING	4.25
E27811	33	1 1/2”（1.900”）YT SETTING RING	4.31
E27810	33	1 1/4”（1.660”）YT SETTING RING	4.38
E29001	33	1”（1.315”）YT SETTING RING	4.75

RECOMMENDED SPARES INCLUDE 2 SETTING RINGS FOR EACH PIPE SIZE

	AOT HYT 150 TON SLIP TYPE ELEVATOR
AOT #	DESCRIPTION RANGE SIZE OF LINKS	WT.
E39284	HYT ELEVATOR COMPLETE L/SLIPS 2 3/8” – 3 1/2” 2 1/4” – 3 1/2”	740

HYT SLIP ASSEMBLIES
AOT #	DESCRIPTION		WT.
E39258-2	3 1/2” X 3 1/2” HYT SLIP ASSY.		170
E39258-4	3 1/2” X 2 7/8” HYT SLIP ASSY.		170
E39259-2	2 7/8” X 2 7/8” HYT SLIP ASSY.		170
E39259-4	2 7/8” X 2 3/8” HYT SLIP ASSY.		170
E39174	3 1/2” HYT SLIP SEGMENTS ONLY (MATCHED SET OF 4)		150
E39175	2 7/8” HYT SLIP SEGMENTS ONLY (MATCHED SET OF 4)		150


HYT REPLACEMENT PARTS
AOT#	ITEM #	DESCRIPTION **SPARES		# REQ.	WT.
E39239	3	HINGE PIN		1	12.40
E39162	4	LATCH		1	22.00
E39238	5	LATCH PIN		1	6.00
E39240	6	LATCH SPRING	2	1	.70
E39161	7	LATCH LOCK	1	1	8.00
E39251	8	LATCH LOCK PIN	1	1	.80
E39241	9	LATCH LOCK SPRING	2	1	.70
E39253	10	HINGE PIN RETAINER		1	.10
E39254	11	LATCH PIN RETAINER		1	.40
E940308-1	12	GREASE FITTING		1	.10
E9519	13	LINK BLOCK		2	5.50
E8151	14	UPPER LINK BLOCK BOLT, NUT, & COT.		2	.50
E8145	15	LINK BLOCK BOLT	2	2	.50
E8150	16	LINK BLOCK NUT	2	2	.15
E939672-19	17	COTTER PIN	2	2	.10
E52321	18	SLIP BOLT	4	4	1.00
E52539-1	19	SLIP SPRING	8	4	.80
E51090	20	GUIDE PLATE		1	8.60
E939098-65	21	GUIDE PLATE SCREW	4	2	.10
E939352-64	22	GUIDE PLATE LOCKWASHER	4	2	.10
E94787923		LOCKWIRE		A/R	.10
E939098-96	24	HEX HEAD CAPSCREW		2	.65
E939352-6	25	LOCKWASHER		4	.10
E51089	26	SETTING RING BUSHING	4	2	.15
E939098-36	27	HEX HEAD CAPSCREW	4	2	.20
E39247	30	3 1/2” & 3 1/2” X 2 7/8” INSERT RET.	8	4	.25
E39246	30	2 7/8” & 2 7/8” X 2 3/8” INSERT RET.	8	4	.25

1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS

HYT INSERTS

AOT#	ITEM #	DESCRIPTION		# REQ.	WT.
E24774	29	3 1/2” X 3 1/2”	INSERT	32	.50
E30358	29	3 1/2” X 2 7/8”	INSERT	32	.75
E24773	29	2 7/8” X 2 7/8”	INSERT	16	.75
E29255	29	2 7/8” X 2 3/8”	INSERT	16	1.00

RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO BE RUN

HYT SETTING RINGS

AOT#	ITEM #	DESCRIPTION	# REQ.	WT.
E39214-3	31	3 1/2” HYT SETTING RING	1	11.00
E39214-2	31	2 7/8” HYT SETTING RING	1	11.00
E39214-1	31	2 3/8” HYT SETTING RING	1	13.00

rev 805

RECOMMENDED SPARES INCLUDE 2 SETTING RINGS FOR EACH PIPE SIZE TO BE RUN

REPLACEMENT PARTS FOR YC SLIP TYPE ELEVATOR

AOT#	ITEM #	DESCRIPTION	# REQ.	WT.
E30214	1	INSERT RET. RING 3 1/2” – 4 1/2”	4	2.75
E30224	1	INSERT RET. RING 5” & 5 /2”	4	2.13
E30230	1	INSERT RET. RING 6 5/8” & 7”	4	2.75
E941286-73	2	INSERT RET. SCREW	4	.13
E30211	3	SETTING PLATE BOLT	4	.25
E30213	4	RUBBER BUSHING	4	.06
E30216	5	SETTING RING RET.	2	.25
E24076	6	SLIP BOLT	4	1.05
E24049	7	SLIP SPRING	4	.38
E24075	8	GUIDE PLATE SCREW w/NUT	4	.40
E93948-8	9	GUIDE PLATE NUT	4	.10
E24506	10	INSERT SPACER	8	.25
SETTING PLATES
AOT #	ITEM #	DESCRIPTION	# REQ.	WT.
E34932	11	3 1/2” SETTING PLATE	1	8.00
E30209	11	4” SETTING PLATE	1	8.00
E30219	11	4 1/2” SETTING PLATE	1	7.00
E30220	11	5” SETTING PLATE	1	6.25
E30223	11	5 1/2” SETTING PLATE	1	6.13
E30226	11	6 5/8” SETTING PLATE	1	6.00
E30229	11	7” SETTING PLATE	1	5.50
BOTTOM GUIDE PLATES
AOT #	ITEM #	DESCRIPTION	# REQ.	WT.
E24071-2	12	7” BOTTOM GUIDE	2	3.75
E24071-3	12	6 5/8” BOTTOM GUIDE	2	4.50
E24071-1	12	5 1/2” BOTTOM GUIDE	2	5.50
E24071	12	5” BOTTOM GUIDE	2	7.75
E24071-4	12	4 1/2” BOTTOM GUIDE		8.50
E26827	12	4” BOTTOM GUIDE	2	8.50
E26827-1	12	3 1/2” BOTTOM GUIDE	2	8.00
			■應	ACCESS


AOT HYC 200 TON SLIP TYPE ELEVATOR

AOT#	DESCRIPTION	RANGESIZE OF LINKS	WT.
E55310	HYC ELEVATOR COMPLETE L/SLIPS & BOTTOM GUIDES	3 1/2” – 7 5/8” 2 1/4” – 3 1/2”	978.00

HYC SLIP ASSEMBLIES

AOT#	DESCRIPTION	WT.
E70009	7 5/8” X 7 5/8” HYC SLIP ASSY.	216
E55515	7” X 7” HYC SLIP ASSY.	224
E55514	7” X 6 5/8” HYC SLIP ASSY.	227
E55513	5 1/2” X 5 1/2” HYC SLIP ASSY.	243
E55512	5 1/2” X 5” HYC SLIP ASSY.	253
E55511	4 1/2” X 4 1/2” HYC SLIP ASSY.	265
E55510	4 1/2” X 4” HYC SLIP ASSY.	268
E55509	4 1/2” X 3 1/2” HYC SLIP ASSY.	274
E55305-1	7 5/8” HYC SLIP SEGMENTS ONLY (MATCHED SET OF 4)	176
E55305	7” HYC SLIP SEGMENTS ONLY (MATCHED SET OF 4)	184
E55304	5 1/2” HYC SLIP SEGMENTS ONLY (MATCHED SET OF4)	200
E55303	4 1/2” HYC SLIP SEGMENTS ONLY (MATCHED SET OF 4)	212

HYC REPLACEMENT PARTS
AOT#	ITEM #	DESCRIPTION **SPARES		# REQ.	WT.
E55311	1	HINGE PIN		1	25.00
E55503	2	LATCH		1	47.00
E55312	3	LATCH PIN		1	9.00
E34909	4	LATCH SPRING	2	1	1.50
E13185	5	LATCH SPRING STOP		1	.25
E13152	6	LATCH LOCK	1	1	4.00
E15101	7	LATCH LOCK BOLT	1	1	.75
E13188	8	LATCH LOCK SPRING	2	1	.25
E8150	9	LATCH LOCK BOLT NUT	1	1	.25
E939672-19	10	COTTER PIN	1	1	.10
E13190	11	DOOR LUG PIN		1	.65
E55504	12	HINGE PIN RETAINER		1	.35
E55505	13	LATCH PIN RETAINER		1	.20
E940308-1	14	GREASE FITTING		1	.10
E9519	15	LINK BLOCK		2	5.50
E8151	16	UPPER LINK BLOCK BOLT, NUT, & COT.	2	2	.50
E8145	17	LINK BLOCK BOLT	2	2	1.19
E8150	18	LINK BLOCK NUT	2	2	.25
E939672-19	19	COTTER PIN	2	2	.10
E24076	20	SLIP BOLT	4	4	1.00
E939354-6	21	LOCKWASHER	4	4	.25
E945044-2	22	SLIP SPRING	8	4	.35
E55508	23	GUIDE PLATE SCREW	8	4	.26
E939484-5	24	GUIDE PLATE NUT	8	4	.03
E939672-17	25	COTTER PIN	8	4	.10
E30216	26	SETTING RING RETAINER (3 1/2” – 7”）	2	2	.25
E70147	26	SETTING RING RETAINER ( 7 5/8”）	2	2	.30
E55501	27	SHOULDER SCREW	8	4	.41
E55502	28	RUBBER BUSHING	8	4	.04
E941286-73	29	INSERT RETAINER SCREW	4	4	.08
E947879	30	LOCK WIRE		A/R	.01
E70011	31	7 5/8” INSERT RETAINER		4	1.85
E30230	31	7” INSERT RETAINER		4	2.00
E30227	31	6 5/8” INSERT RETAINER		4	2.00
E30224	31	5 1/2” INSERT RETAINER		4	2.50
E30221	31	5” INSERT RETAINER		4	2.25
E30214	31	4 1/2” – 3 1/2” INSERT RETAINER		4	2.50

1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS


HYC INSERTS
AOT#	ITEM #	DESCRIPTION	# REQ.	WT.
E70010	32	7 5/8” X 7 5/8” INSERT	48	.50
E16407	32	7” X 7” INSERT	48	.50
E24748	32	7” X 6 5/8” INSERT	48	.75
E16407	32	5 1/2” X 5 1/2” INSERT	36	.50
E24783	32	5 1/2” X 5” INSERT	36	.80
E24785	32	5 1/2” X 4 1/2” INSERT	36	1.05
E16408	32	4 1/2” X 4 1/2” INSERT	24	.50
E24781	32	4 1/2” X 4” INSERT	24	.80
E24779	32	4 1/2” X 3 1/2” INSERT	24	1.00

RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO BE RUN

HYC SETTING RINGS

AOT#	ITEM #	DESCRIPTION	# REQ.	WT.
E70012	33	7 5/8” HYC SETTING RING	1	11.00
E55522	33	7” HYC SETTING RING	1	11.50
E55521	33	6 5/8” HYC SETTING RING	1	12.00
E55520	33	5 1/2” HYC SETTING RING	1	13.00
E55519	33	5” HYC SETTING RING	1	14.50
E55518	33	4 1/2” HYC SETTING RING	1	15.00
E55517	33	4” HYC SETTING RING	1	16.50
E55516	33	3 1/2” HYC SETTING RING	1	18.00

RECOMMENDED SPARES INCLUDE 2 SETTING RINGS FOR EACH PIPE SIZE TO BE RUN

HYC BOTTOM GUIDE PLATES

AOT#	ITEM #	DESCRIPTION	# REQ.		WT.
E24071-6	34	7 5/8” HYC BOTTOM GUIDE PLATES (SET)		1	5.02
E24071-2	34	7” BOTTOM GUIDE	2		3.75
E24071-3	34	6 5/8” BOTTOM GUIDE	2		4.50
E24071-1	34	5 1/2” BOTTOM GUIDE	2		5.50
E24071	34	5” BOTTOM GUIDE	2		7.75
E24071-4	34	4 1/2” BOTTOM GUIDE	2		8.50
E26827	34	4” BOTTOM GUIDE	2		8.50
E26827-1	34	3 1/2” BOTTOM GUIDE	2		8.00

RECOMMENDED SPARES INCLUDE 1 SET BOTTOM GUIDES FOR EACH PIPE SIZE TO BE RUN

BASIC TYPE INSERTS FOR BJ® ELEVATORS

YC THROUGH 1000 TON

AOT#	SLIP SIZE	PIPE SIZE (OD)	YC	7 5/8” 175 TON	NUMBER OF INSERTS REQ. 13 3/8” 13 3/8” 10 3/4” 14” 350 500 500 1000 TON TON TON TON				WT. EA.
E16441	31/2”	31/2”		18					.50
E16442	4”	4”	16						.50
E16408	41/2”	41/2”	16	27					.50
E16407	51/2”	51/2”	16	27	36	45	45		.50
E16407	7”	7”	24		48	60	60		.50
E16407	7 5/8”	7 5/8”		45	60	75	75		.50
E15660	8 5/8”	8 5/8”			60		75		.50
E15660	8 7/8”	8 7/8”						108	.50
E15660	9 5/8”	9 5/8”			72	90	90		.50
E15660	10 3/4”	10 3/4”			72		90		.50
E15660	10 7/8”	10 7/8”						126	.50
E15660	11 3/4”	11 3/4”			72	105			.50
E15660	12 1/2”	12 1/2”						144	.50
E15660	13 3/8”	13 3/8”			84	135			.50
E15660	14”	14”						162	.50

REDUCING INSERTS FOR BJ® ELEVATORS

YC THROUGH 1000 TON

AOT #	SLIP 纽ZE	PIPE 纽ZE (OD)	YC	7 5/8” 175 TON	NUMBER OF INSERTS REQ. ¹ 13 3/8”13 3/8”10 3/4”14” 350 500 500 1000 TON TON TON TON				WT. EA.
E25780	31/2”	2 7/8”		18					.85
E24777	31/2”	2 3/8”		18					1.20
E24781	41/2”	4”	16	27					.80
E24779	41/2”	31/2”	16	27					1.00
E24783	51/2”	5”	16	27	36	45	45		.80
E24785	51/2”	41/2”	16	27	36	45	45		1.05
E24748	7”	6 5/8”	24		48	60	60		.75
E25474	7 5/8”	6 5/8”		45	60	75	75		1.05
E26750	7 5/8”	7”		45	60	75	75		.90
E25474	8 5/8”	7 5/8”		45	60		75		1.05
E39290	8 7/8”	7 5/8^J						108	1.20
E39286	8 7/8”	8 5/8”						108	.65
E25474	9 5/8”	8 5/8”			72	90	90		1.05
E33249	10 3/4”	9 5/8”			72		90		1.15
E39290	10 7/8”	9 5/8”						126	1.30
E39285	10 7/8”	10 3/4”						126	.60
E25474	11 3/4”	10 3/4”			72	105		126	1.05
E39289	12 1/2”	11 3/4”						144	.90
E32700	14”	13 3/8”						162	.90


INSERTS FOR VARCO® ELEVATORS/SPIDERS

AOT#	DESCRIPTION	REF#	SLIP SIZE	PIPE SIZE (OD) 75/8”	200 TON 14，，	350 TON 14”	NUMBER OF INSERTS REQUIRED 500 750 1000 500 750 TON TON TON TON TON 14” 24”^ 24” 24”
23-157	REDUCER	2160	31/2”	2 3/8”	12/12B
23-156	REDUCER	2161	31/2”	2 7/8”	12/12B
23-155	BASIC	2162	31/2”	31/2”	24
23-160	REDUCER	2163	41/2”	31/2”	16/16B
23-159	REDUCER	2164	41/2”	4”	16/16B
23-158	BASIC	2165	41/2”	41/2”	32
23-163	REDUCER	2168	51/2”	41/2”	16/16B 24/16B		32/16B
23-165	REDUCER	2169	51/2”	5”	16/16B 24/16B		32/16B
23-164	BASIC	2170	51/2”	51/2”	32	40	48
23-168	REDUCER	2632	7 5/8”	6 5/8”	24/24B36/24B		48/24B	60/24B
23-169	REDUCER	2623	7 5/8”	7”	24/24B36/24B		48/24B	60/24B
23-170	BASIC	2633	7 5/8”	7 5/8”	48	60	72	84
23-171	REDUCER	2640	9 5/8”	8 5/8”		48/32B	64/32B80/32B		96/24B
23-170	BASIC	2633	9 5/8”	9 5/8”		48/32B	64/32B	80/32B	96/24B
23-171	REDUCER	2640	11 3/4”	10 3/4”		60/40B	80/40B	100/40B144/36B
23-172	BASIC	2637	11 3/4”	11 3/4”		100	120	140	180
23-172	BASIC	2637	13 3/8”	13 3/8”		100	120	140
23-173	REDUCER	2636	14”	13 3/8”		60/40B	80/40B	100/40B144/36B
23-174	BASIC	2635	14”	14”		100	120	140	180
23-174	BASIC	2635	16”	16”					240	180	210
23-175	REDUCER	13868	20”	18 5/8”					720	420	510
23-174	BASIC	2635	20”	20”					300	180	210
23-174	BASIC	2635	24”	24”						180	210