BJtubingtong

	BJ Style Tubing Tongs
	BJ Style BTS Back up Assembly 2-3/8″ to 3.668″
Item #	Part Number	Description	Approx. Weight (lbs)	Qty Required
161	30420-112	MS Backup assembly, complete with 2-3/8 to 3.668 lug jaw assembly less Outer-Inner sleeve assembly.	30.50 lbs
162	30430-110	MS Backup assembly, complete with 2-3/8 to 3.668 lug jaw assembly with Outer-Inner sleeve assembly.	53.42 lbs
163	943667-18	Cotter Pin	0.01 lbs
164	5206	Latch Spring	0.02 lbs
165	1573832	Die with Slot	0.34 lbs
166	6267	Short Jaw	3.20 lbs
167	–	Die Retainer Screw	0.01 lbs
168	939142-8	3/4″-10 Stover Nut	0.03 lbs
169	30421-1	Long Jaw Assembly	7.60 lbs
170	30572-1	Latch Arm	3.00 lbs
171	30573	Long Jaw Spring (Y)	0.12 lbs
172	30574	Short Jaw Spring (X)	0.13 lbs
173	30575	Long Hinge Pin, 3/4	0.60 lbs
174	–	MS Backup Hanger Leveling Bolt, 5/8″ x 7″	0.40 lbs
175	28622-5	Outer-Inner sleeve assembly	22.40 lbs
176	28622	Outer Sleeve	14.60 lbs
177	28623	Inner Sleeve	7.60 lbs
178	28624	Lever	8.00 lbs
179	945031-64	Suspension Spring	0.13 lbs
	BJ Style BTS Backup Assembly 3-1/2″ to 4-1/2″

Item #	Part Number	Description	Approx. Weight (lbs)
180	–	MS Backup assembly, complete with 3-1/2 to 4-1/2 lug jaw assembly less Outer-Inner sleeve assembly.	30.50 lbs
181	–	MS Backup assembly, complete with 3-1/2 to 4-1/2 lug jaw assembly with Outer-Inner sleeve assembly.	48.18 lbs
182	943667-18	Cotter Pin	0.01 lbs
183	5206	Latch Spring	0.02 lbs
184	1573832	Die with Slot	0.34 lbs
185	6267	Short Jaw	3.20 lbs
186	–	Die Retainer Screw	0.01 lbs
187	30359-1	Hex Head Bolt, 3/4″ x 3″	0.40 lbs
188	939142-8	3/4″-10 Stover Nut	0.03 lbs
189	30421-1	Long Jaw Assembly	7.60 lbs
190	30424-6	Lug Jaw Assembly, 3-1/2″ to 4-1/2″	2.99 lbs
191	13494	Short Hinge Pin, 3/4	0.40 lbs
192	30572-1	Latch Arm	3.00 lbs
193	30573	Long Jaw Spring (Y)	0.12 lbs
194	30574	Short Jaw Spring (X)	0.13 lbs
195	30575	Long Hinge Pin, 3/4	0.60 lbs
196	–	MS Backup Hanger Leveling Bolt, 5/8″ x 7″	0.40 lbs
197	28622-5	Outer-Inner sleeve assembly	22.40 lbs
198	28622	Outer Sleeve	14.60 lbs
199	28623	Inner Sleeve	7.60 lbs
200	28624	Lever	8.00 lbs
201	945031-64	Suspension Spring	0.13 lbs

	BJ Style BTS Tubing Tong
Item #	Part Number	Description	Approx. Weight (lbs)
1	30072	Hydraulic Powered Tubing Tong 30072-X	442.00 lbs
2	30072-12	Hydraulic Powered Tubing Tong 30072-XHT	444.00 lbs
3	–	Frame Weldment, model BTSX only	140.00 lbs
4	–	Case Shoulder Bolt, 3/4″ X 7-1/2″	1.00 lbs
5	939352-6	3/4″ Lockwasher	0.02 lbs
6	939142-8	Stover Nut, 3/4″-10	0.05 lbs
7	34898	Frame Cover	82.00 lbs
8	–	Frame Cover, model BTSX only	82.00 lbs
9	35129	Brake Band Cover, models RSX & BTSX only	9.63 lbs
10	35129-1	Brake Band Cover, model CTS only	9.63 lbs
11	939084-3	Capscrew, Brake Band Cover	0.01 lbs
12	939349-3	Lock Washer, Brake Band Cover Capscrew	0.01 lbs
13	–	Dowel Pin, 1/2″ x 3/4″	0.01 lbs
14	939067-55	Frame Cover Bolt, 5/8″ x 2″	0.02 lbs
15	939207-6	Frame Cover Nut, 5/8	0.01 lbs
16	939644-11	Frame Cover Lock Washer, 5/8	0.01 lbs
17	943631-70	Frame Cover Dowel Pin, 3/4″ x 2″	0.20 lbs
18	30837	Guard Assembly, Top Half (PN. 72-5, 72-11, 72-12)	6.20 lbs
19	30871	Guard, Top Half	5.40 lbs
20	30872	Guard, Bottom Half	3.00 lbs
21	15495-1	Top Guard Nut	0.60 lbs
22	15495-2	Bottom Guard Nut	0.40 lbs
23	939067-44	Guard Capscrew, 1/2″ x 1-3/4	0.01 lbs
24	941439-5	Flexloc Nut	0.02 lbs
25	16448	Guard Spring	0.13 lbs
26	30874	Guard Spring Housing	0.40 lbs
27	16481	Guard Spring Housing Pin, 3/8″ x 2-1/4	0.03 lbs
28	939067-53	Guard Spring Bolt, 3/8″ x 2″	0.02 lbs
29	16355	Hanger Pin, 5/8″ x 3-1/8″	0.20 lbs
30	947128-140	Spiral Pin, (roll pin)	0.01 lbs
31	16683	Suspension Spring Housing	9.50 lbs
32	16378	Suspension Spring Shank	2.80 lbs
33	939484-8	Suspension Spring Shank Nut	0.08 lbs
34	939667-28	Cotter Pin	0.01 lbs
35	16446	Suspension Spring, Outer	8.68 lbs
36	27955	Suspension Spring, Inner	1.20 lbs
37	16682	Suspension Spring Washer	0.20 lbs
38	16379-1	Suspension Spring Housing Upper Cap with Eye Bolt and Nut	5.40 lbs
39	16380	Suspension Spring Housing Lower Cap	1.80 lbs
40	15495	Roller Shaft Alemite Nut	0.25 lbs
41	939537-61	Roller Shaft Elastic Stop Nut, 3/4″	0.20 lbs
42	939644-13	Roller Shaft Washer, 7/8″	0.10 lbs
43	16480	Idler Sprocket Adjustment Plate	0.60 lbs
44	939067-3	Idler Sprocket Adjustment Plate Capscrew, 3/8″ x 3/4″	0.02 lbs
45	30835	Front Idler Roller Assembly (PN. 72-35 thru 72-39)	6.05 lbs
46	15494-5	Front Idler Roller Shaft Assembly	1.45 lbs
47	30870	Idler Roller (Front)	1.80 lbs
48	15491	Idler Roller (Back)	2.40 lbs
49	979103-4	Idler Roller Bearing	1.40 lbs
50	941157-281	Idler Roller Bearing Retaining Ring	0.10 lbs
51	942685-118	Idler Roller Assembly Retaining Ring Set	0.01 lbs
52	30361	Back Idler Roller Assembly (PN. 72-41 and 72-36A thru 72-39)	5.05 lbs
53	30360-2	Back Idler Roller Shaft Assembly	1.50 lbs
54	940895-606	Key	0.01 lbs
55	15493-1	Idler Sprocket Assembly (PN. 72-43 thru 72-46)	6.53 lbs
56	15493	Idler Sprocket	5.13 lbs
57	942384-36	Outer Idler Sprocket Bearing	0.30 lbs
58	942394-42	Inner Idler Sprocket Bearing	0.20 lbs
59	15498	Idler Sprocket Bearing Retaining Washer	0.30 lbs
60	941157-231	Idler Sprocket Bearing Retaining Ring	0.10 lbs
61	15492-2	Idler Sprocket Roller Shaft Assembly (PN. 72-46A thru 72-50)	9.60 lbs
62	15496-5	Idler Sprocket Shaft Assembly	2.30 lbs
63	15492	Idler Sprocket Roller	4.75 lbs
64	979103-4	Idler Sprocket Roller Bearing	1.40 lbs
65	941157-281	Idler Sprocket Roller Bearing Retaining Ring	0.10 lbs
66	942685-114	Idler Sprocket Roller Assembly Retaining Ring	0.10 lbs
67	15500	Idler Sprocket Spacer	0.50 lbs
68	15533	Gear Shift Handle	1.50 lbs
69	15516	Gear Shift Handle Lock Pin	0.06 lbs
70	16977	Gear Shift Handle Lock Pin Spring	0.04 lbs
71	940323-4	Gear Shift Handle Grease Fitting	0.01 lbs
72	15534	Gear Shift Shaft	2.08 lbs
73	939484-5	Gear Shift Shaft Stover Nut, 5/8″	0.01 lbs
74	23056	Gear Shift Shaft Bushing	0.20 lbs
75	942271-11	Gear Shift Shaft “0” Ring	0.01 lbs
76	939995-812	Gear Shift Shaft Key	0.20 lbs
77	15501	Gear Shift Actuator Yoke	1.50 lbs
78	15502	Gear Shift Finger	0.35 lbs
79	15512	High Speed Driven Gear	4.00 lbs
80	15511-1	Low Speed Driven Gear Assembly (PN. 72-64 and 72-65)	9.35 lbs
81	15511	Low Speed Driven Gear	9.00 lbs
82	15537	Low Speed Driven Gear Bushing	0.25 lbs
83	15507	Low Speed Driven Gear Thrust Washer	0.50 lbs
84	979054-304	Sliding Gear Shaft Lower Bearing	0.40 lbs
85	979102-5304	Drive Shaft Lower Bearing	0.40 lbs
86	15505	Frame (Bottom) Gear Box Bearing Plate	0.40 lbs
87	16979	Frame (Bottom) Gear Box Bearing Plate Gasket	0.06 lbs
88	941271-25	Bearing Plate Capscrew, 1/4″ x 1/2″	0.02 lbs
89	940251-2	Gear Case Drain Plug, 1/4″	0.08 lbs
90	947915-11	Roller Chain Assembly with Connecting Link and Offset Link	21.00 lbs
91	17906-2	Outer Ring Assembly, (PN. 72-76 thru 72-80), models RSX & BTSX only	55.95 lbs
92	–	Outer Ring & Inner Ring Assembly, models RSX & BTSX only	81.00 lbs
93	17906	Outer Ring	41.00 lbs
94	17916	Outer Ring Large Roller	1.75 lbs
95	17917	Outer Ring Small Roller, qty 5 for model CTSX only	1.00 lbs
96	17918	Roller Bushing	0.50 lbs
97	17919	Roller Pin	0.80 lbs
98	940308-1	Grease Fitting	0.01 lbs
99	17921	Outer Ring Sprocket, 4-1/2 , models RSX & BTSX only	9.00 lbs
100	941237-75	Outer Ring Sprocket Bolt (Short) 1/2″ x 1-1/4″	0.10 lbs
101	941238-75S	Outer Ring Sprocket Bolt Set, models RSX & BTSX only	1.20 lbs
102	941237-108	Outer Ring Sprocket Bolt (Long) 1/2″ x 2″	0.30 lbs
103	941442-5	Lock Nut	0.10 lbs
104	943631-92	Outer Ring Sprocket Dowel Pin, 5/8″ x 3″	0.60 lbs
105	17907	Inner Ring, models RSX & BTSX only	15.00 lbs
106	30862	Brake Band Assembly, 5-1/2	2.80 lbs
107	15528	Brake Band Pin	0.60 lbs
108	939643-10	Star Washer	0.01 lbs
109	17920	Jaw and Bushing Pin, models RSX & BTSX only	0.75 lbs
110	943631-69	Gear Box Cover Dowel Pin, 5/8″ x 2″	0.30 lbs
111	32331-1	Front End Control Assembly, (Lever Style)	10.78 lbs
112	31312-1	Control Bracket Weldment, (Lever Style)	3.80 lbs
113	28019	Shift Bracket Weldment	1.80 lbs
114	28022	Shifter Rod Weldment	0.80 lbs
115	941439-2	Stover Locknut, 3/8	0.02 lbs
116	37078-1	Throttle Rod Weldment, (Lever Style) , model BTSX only	2.00 lbs
117	939370-9	Washer, 3/8″	0.01 lbs
118	939667-10	Cotter Pin	0.01 lbs
119	28020	Clamp Plate	0.40 lbs
120	28021	Shifter Lever	0.60 lbs
121	941271-93	Hex Head Capscrew, 3/8″ x 1-1/2″	0.05 lbs
122	941442-3	Lock Nut, 3/8″	0.03 lbs
123	941271-93	Allen Head Capscrew, 3/8″ x 1-1/2″	0.05 lbs
124	939369-9	High Collar Lockwasher	0.01 lbs
125	940584-86-1	Shoulder Screw, 3/4″ x 3″	0.60 lbs
126	941442-6	Nut-Shoulder Screw, 5/8″	0.03 lbs
127	–	2-3/8 Jaw (less insert)	5.00 lbs
128	27477-1	2-3/8 Jaw Assembly	6.00 lbs
129	–	2-7/8 Jaw (less insert)	5.00 lbs
130	27481-1	2-7/8 Jaw Assembly	6.00 lbs
131	–	4 Jaw (less insert)	3.40 lbs
132	23624-1	4 Jaw Assembly	3.80 lbs
133	–	4-1/2 Jaw (less insert)	2.60 lbs
134	24553-1	4-1/2 Jaw Assembly	3.00 lbs
135	–	2-3/8 Bushing (less inserts)	9.00 lbs
136	27645-1	2-3/8 Bushing Assembly	11.20 lbs
137	–	2-7/8 Bushing (less inserts)	8.80 lbs
138	27660-1	2-7/8 Bushing Assembly	10.20 lbs
139	–	3-1/2 Bushing (less inserts)	8.40 lbs
140	17913-1	3-1/2 Bushing Assembly	8.80 lbs
141	–	4 Bushing (less inserts)	6.80 lbs
142	23623-1	4 Bushing Assembly	7.20 lbs
143	–	4-1/2 Bushing (less inserts)	5.00 lbs
144	24552-1	4-1/2 Bushing Assembly	5.25 lbs
145	27494-1	2-3/8 Insert	1.00 lbs
146	–	2-3/8 x 1 (1.315) Reducer Insert	1.60 lbs
147	–	2-3/8 x 1-1/4 Reducer Insert	1.40 lbs
148	–	2-3/8 x 1-1/2 Reducer Insert	1.40 lbs
149	–	2-3/8 x 2-1/16 Reducer Insert	1.20 lbs
150	27498-1	2-7/8 Insert	0.80 lbs
151	–	2-7/8 x 1-1/4 Reducer Insert	1.80 lbs
152	–	2-7/8 x 1-1/2 Reducer Insert	1.80 lbs
153	–	2-7/8 x 2-1/16 Reducer Insert	1.60 lbs
154	–	2-7/8 x 2-3/8 Reducer Insert	1.40 lbs
155	6473	3-1/2 Insert	0.20 lbs
156	6473	4 Insert	0.20 lbs
157	24554	4-1/2 Insert	0.10 lbs
158	–	Insert Retainer, 1/4 x 1 roll pin	0.01 lbs
159	–	Insert Retainer, 1/4 x 3/4 roll pin	0.01 lbs
160	–	Set Screw, 1/4-20 x 1/2	0.01 lbs

	BJ Style CTSX Tubing Tong
Item #	Part Number	Description	Approx. Weight (lbs)

	35089	Hydraulic Powered Tubing Tong 35089-X	466 lbs
	35089-1	Hydraulic Powered Tubing Tong 35089-XHT	468 lbs
1	–	Frame Weldment, (Model CTSX only)	139.50 lbs
2	–	Case Shoulder Bolt, 3/4″ x 7-1/2″	1.00 lbs
3	939352-6	3/4″ Lockwasher	0.02 lbs
4	93142-8	Stover Nut 3/4″ x 10	0.05 lbs
5	34898	Frame Cover	82.00 lbs
6	–	Frame Cover (Model CTSX only)	81.50 lbs
7	35129-1	Brake Band Cover (Model CTS Only)	9.63 lbs
8	939084-3	Capscrew, Brake Band Cover	0.01 lbs
9	939349-3	Lock Washer, Brake Band Cover Capscrew	0.01 lbs
10	–	Dowel Pin 1/2″ x 3/4″	0.01 lbs
11	939067-55	Frame Cover Bolt 5/8″ x 2″	0.02 lbs
12	939207-6	Frame Cover Bolt 5/8″ x 2″	0.01 lbs
13	939644-11	Frame Cover Lock Washer 5/8″	0.01 lbs
14	943631-70	Frame Cover Dowel Pin 3/4″ x 2″	0.20 lbs
15	30837	Guard Assembly, Top Half	6.20 lbs
16	30871	Guard, Top Half	5.40 lbs
17	30872	Guard, Bottom Half	3.00 lbs
18	15495-1	Top Guard Nut	0.60 lbs
19	15495-2	Bottom Guard Nut	0.40 lbs
20	939067-44	Guard Capscrew 1/2″ x 3/4″	0.01 lbs
21	941439-5	Flexloc Nut	0.02 lbs
22	16448	Guard Spring	0.13 lbs
23	30874	Guard Spring Housing	0.40 lbs
24	16481	Guard Spring Housing Pin 3/8″ x 2-1/4″	0.03 lbs
25	939067-53	Guard Spring Bolt 3/8″ x 2″	0.02 lbs
26	16355	Hanger Pin 5/8″ x 3-1/8″	0.20 lbs
27	947128-140	Spiral Pin (Roll Pin)	0.01 lbs
28	16683	Suspension Spring Housing	9.50 lbs
29	16378	Suspension Spring Shank	2.80 lbs
30	939484-8	Suspension Spring Shank Nut	0.08 lbs
31	939667-28	Cotter Pin	0.01 lbs
32	16446	Suspension Spring, Outer	8.68 lbs
33	27955	Suspension Spring, Inner	1.20 lbs
34	16682	Suspension Spring Washer	0.20 lbs
35	16379-1	Suspension Spring Housing Upper Cap with Eye Bolt	5.40 lbs
36	16380	Suspension Spring Housing Lower Cap	1.80 lbs
37	15495	Roller Shaft Alemite Nut	0.25 lbs
38	939537-61	Roller Shaft Elastic Stop Nut 3/4″	0.20 lbs
39	939644-13	Roller Shaft Washer 7/8″	0.10 lbs
40	16480	Idler Sprocket Adjusment Plate	0.60 lbs
41	939067-3	Idler Sprocket Adjusment Plate Capscrew 3/8″ x 3/4″	0.02 lbs
42	30835	Front Idler Roller Assembly	6.05 lbs
43	15494-5	Front Roller Shaft Assembly	1.45 lbs
44	30870	Idler Roller (Front)	1.80 lbs
45	15491	Idler Roller (Back)	2.40 lbs
46	979103-4	Idler Roller Bearing	1.40 lbs
47	941157-281	Idler Roller Bearing Retaining Ring Set	0.10 lbs
48	942685-118	Idler Roller Assembly Retaining Ring Set	0.01 lbs
49	30361	Back Idler Roller Assembly	5.05 lbs
50	30360-2	Back Idler Roller Assembly	1.50 lbs
51	940895-606	Key	0.01 lbs
52	15493-1	Idler Sprocket Assembly	6.53 lbs
53	15493	Idler Sprocket	5.13 lbs
54	942384-36	Outer Idler Sprocket Bearing	0.30 lbs
55	942394-42	Inner Idler Sprocket Bearing	0.20 lbs
56	15498	Idler Sprocket Bearing Retaining Washer	0.30 lbs
57	941157-231	Idler Sprocket Bearing Retaining Ring	0.10 lbs
58	15492-2	Idler Sprocket Roller Shaft Assembly	9.60 lbs
59	15496-5	Idler Sprocket Shaft Assembly	2.30 lbs
60	15492	Idler Sprocket Roller	4.75 lbs
61	979103-4	Idler Sprocket Roller Bearing	1.40 lbs
62	941157-281	Idler Sprocket Roller Bearing Retaining Ring	0.10 lbs
63	942685-114	Idler Sprocket Roller Assembly Retaining Ring	0.10 lbs
64	15500	Idler Sprocket Spacer	0.50 lbs
65	15533	Gear Shift Handle	1.50 lbs
66	15516	Gear Shift Handle Lock Pin	0.06 lbs
67	16977	Gear Shift Handle Lock Pin Spring	0.04 lbs
68	940323-4	Gear Shift Handle Grease Fitting	0.01 lbs
69	15534	Gear Shift Shaft	2.08 lbs
70	939484-5	Gear Shift Shaft Stover Nut 5/8″	0.01 lbs
71	23056	Gear Shift Shaft Bushing	0.20 lbs
72	942271-11	Gear Shift Shaft “O” Ring	0.01 lbs
73	939995-812	Gear Shift Shaft Key	0.20 lbs
74	15501	Gear Shift Actuator Yoke	1.50 lbs
75	15502	Gear Shift Finger	0.35 lbs
76	15512	High Speed Driven Gear	4.00 lbs
77	15511-1	Low Speed Driven Gear Assembly	9.35 lbs
78	15511	Low Speed Driven Gear	9.00 lbs
79	15537	Low Speed Driven Gear Bushing	0.25 lbs
80	15507	Low Speed Driven Gear Thrust Washer	0.50 lbs
81	979054-304	Sliding Gear Shaft Lower Bearing	0.40 lbs
82	979102-5304	Drive Shaft Lower Bearing	0.40 lbs
83	15505	Frame (Bottom) Gear Box Bearing Plate	0.40 lbs
84	16979	Frame (Bottom) Gear Box Bearing Plate Gasket	0.06 lbs
85	941271-25	Bearing Plate Capscrew 1/4″ x 1/2″	0.02 lbs
86	940251-2	Gear Case Drain Plug 1/4″	0.08 lbs
87	947915-11	Roller Chain Assembly with Connecting Link and Off	21.00 lbs
88	–	Outer Ring Assembly	55.00 lbs
89	35282	Outer Ring & Inner Ring Assembly	74.50 lbs
90	17906-3	Outer Ring (Model CTSX Only)	63.40 lbs
91	17917	Outer Ring Small Roller	1.00 lbs
92	17918	Roller Bushing	0.50 lbs
93	17919	Roller Pin	0.80 lbs
94	940308-1	Grease Fitting	0.01 lbs
95	30867	Outer Ring Sprocket 5-1/2″ (Model CTSX Only)	8.00 lbs
96	941237-75	Outer Ring Sprocket Bolt (Short) 1/2″ – 1-1/4″	0.10 lbs
97	941240-75	Outer Ring Sprocket Bolt (Short) 7/16″ x 1-1/4″ (Model CTSX only)	0.20 lbs
98	941238-75S-1	Outer Ring Sprocket Bolt Set	0.80 lbs
99	941442-5	Lock Nut	0.10 lbs
100	943631-92	Outer Ring Sprocket Dowel Pin 5/8″ x 3″	0.60 lbs
101	31656	Inner Ring (Model CTSX only)	14.50 lbs
102	30862	Brake Band Assembly 5-1/2″	2.80 lbs
103	15528	Brake Band Pin	0.60 lbs
104	939643-10	Star Washer	0.01 lbs
105	30868	Jaw and Bushing Pin (Model CTSX Only)	0.40 lbs
106	943631-69	Gear Box Cover Dowel Pin 5/8″ x 2″	0.30 lbs
107	32331-1	Front End Control Assembly (Lever Style)	10.78 lbs
108	31312-1	Control Bracket Weldment (Lever Style)	3.80 lbs
109	28019	Shift Bracket Weldment	1.80 lbs
110	28022	Shifter Rod Weldment	0.80 lbs
111	941439-2	Stover Locknut 3/8″	0.02 lbs
112	28023-1	Throttle Rod Weldment (Lever Style)	2.00 lbs
113	939370-9	Washer 3/8″	0.01 lbs
114	939667-10	Cotter Pin	0.01 lbs
115	28020	Clamp Plate	0.40 lbs
116	28021	Shifter Lever	0.60 lbs
117	941271-93	Hex Head Capscrew 3/8″ x 1-1/2″	0.05 lbs
118	941442-3	Lock Nut 3/8″	0.03 lbs
119	941271-93	Allen Head Capscrew 3/8″ x 1-1/2″	0.05 lbs
120	939369-9	High Collar Lockwasher	0.01 lbs
121	940584-86-1	Shoulder Screw 3/4″ x 3″	0.60 lbs
122	941442-6	Nut-Shoulder Screw 5/8″	0.03 lbs
123	34896	Hanger	7.40 lbs
124	34897	Hanger Adapter	11.80 lbs
125	939107-506	Hex Head Bolt 3/4″ x 6-1/2″	0.80 lbs
126	939168-131	Square Head Set Screw	0.20 lbs
127	–	Jam Nut	0.03 lbs
128	939053-156	Hex Head Bolt 3/4″ x 4″	0.40 lbs
129	939502-142	Clevis Pin 3/4″ x 2-1/2″	0.20 lbs
130	939142-8	Stover Nut 3/4″ x 10	0.50 lbs
131	939352-6	Lockwasher 3/4″	0.02 lbs
132	6473	3-1/2″ Insert	0.20 lbs
133	–	3-1/2″ Jaw (Less Insert)	4.40 lbs
134	–	3-1/2″ Bushing (Less Insert)	14.00 lbs
	BJ Style RS Back Up Assembly 2-3/8″ to 3.668″
Item #	Part Number	Description	Approx. Weight (lbs)
160	30420-112	MS Backup assembly, complete with 2-3/8 to 3.668 lug jaw assembly less Outer-Inner sleeve assembly	30.50 lbs
161	30430-110	MS Backup assembly, complete with 2-3/8 to 3.668 lug jaw assembly with Outer-Inner sleeve assembly	53.42 lbs
162	943667-18	Cotter Pin	0.01 lbs
163	5206	Latch Spring	0.02 lbs
164	1573832	Die with Slot	0.34 lbs
165	6267	Short Jaw	3.20 lbs
166	–	Die Retainer Screw	0.01 lbs
167	939142-8	3/4″-10 Stover Nut	0.03 lbs
168	30421-1	Long Jaw Assembly	7.60 lbs
169	30572-1	Latch Arm	3.00 lbs
170	30573	Long Jaw Spring (Y)	0.12 lbs
171	30574	Short Jaw Spring (X)	0.13 lbs
172	30575	Long Hinge Pin, 3/4	0.60 lbs
173	–	MS Backup Hanger Leveling Bolt, 5/8″ x 7″	0.40 lbs
174	28622-5	Outer-Inner sleeve assembly	22.40 lbs
175	28622	Outer Sleeve	14.60 lbs
176	28623	Inner Sleeve	7.60 lbs
177	28624	Lever	8.00 lbs
178	945031-64	Suspension Spring	0.13 lbs
	BJ Style RS Back Up Assembly 3-1/2″ to 4-1/2″
Item #	Part Number	Description	Approx. Weight (lbs)

179	–	MS Backup assembly, complete with 3-1/2 to 4-1/2 lug jaw assembly less Outer-Inner sleeve assembly.	30.50 lbs
180	–	MS Backup assembly, complete with 3-1/2 to 4-1/2 lug jaw assembly with Outer-Inner sleeve assembly.	48.18 lbs
181	943667-18	Cotter Pin	0.01 lbs
182	5206	Latch Spring	0.02 lbs
183	1573832	Die with Slot	0.34 lbs
184	6267	Short Jaw	3.20 lbs
185	–	Die Retainer Screw	0.01 lbs
186	30359-1	Hex Head Bolt, 3/4″ x 3″	0.40 lbs
187	939142-8	3/4″-10 Stover Nut	0.03 lbs
188	30421-1	Long Jaw Assembly	7.60 lbs
189	30424-6	Lug Jaw Assembly, 3-1/2″ to 4-1/2″	2.99 lbs
190	13494	Short Hinge Pin, 3/4	0.40 lbs
191	30572-1	Latch Arm	3.00 lbs
192	30573	Long Jaw Spring (Y)	0.12 lbs
193	30574	Short Jaw Spring (X)	0.13 lbs
194	30575	Long Hinge Pin, 3/4	0.60 lbs
195	–	MS Backup Hanger Leveling Bolt, 5/8″ x 7″	0.40 lbs
196	28622-5	Outer-Inner sleeve assembly	22.40 lbs
197	28622	Outer Sleeve	14.60 lbs
198	28623	Inner Sleeve	7.60 lbs
199	28624	Lever	8.00 lbs
200	945031-64	Suspension Spring	0.13 lbs
	BJ Style RS Tubing Tong
Item #	Part Number	Description	Approx. Weight (lbs)

1	34891	Hydraulic Powered Tubing Tong 34891-X	452.00 lbs
2	34891-1	Hydraulic Powered Tubing Tong 34891-XHT	454.00 lbs
3	34893	Frame Weldment	140.00 lbs
4	–	Case Shoulder Bolt, 3/4″ X 7-1/2″	1.00 lbs
5	939352-6	3/4″ Lockwasher	0.02 lbs
6	939142-8	Stover Nut, 3/4″-10	0.05 lbs
7	34898	Frame Cover	82.00 lbs
8	35129	Brake Band Cover, models RSX & BTSX only	9.63 lbs
9	35129-1	Brake Band Cover, model CTS only	9.63 lbs
10	939084-3	Capscrew, Brake Band Cover	0.01 lbs
11	939349-3	Lock Washer, Brake Band Cover Capscrew	0.01 lbs
12	–	Dowel Pin, 1/2″ x 3/4″	0.01 lbs
13	939067-55	Frame Cover Bolt, 5/8″ x 2″	0.02 lbs
14	939207-6	Frame Cover Nut, 5/8	0.01 lbs
15	939644-11	Frame Cover Lock Washer, 5/8	0.01 lbs
16	943631-70	Frame Cover Dowel Pin, 3/4″ x 2″	0.20 lbs
17	30837	Guard Assembly, Top Half (PN. 72-5, 72-11, 72-12)	6.20 lbs
18	30871	Guard, Top Half	5.40 lbs
19	30872	Guard, Bottom Half	3.00 lbs
20	15495-1	Top Guard Nut	0.60 lbs
21	15495-2	Bottom Guard Nut	0.40 lbs
22	939067-44	Guard Capscrew, 1/2″ x 1-3/4	0.01 lbs
23	941439-5	Flexloc Nut	0.02 lbs
24	16448	Guard Spring	0.13 lbs
25	30874	Guard Spring Housing	0.40 lbs
26	16481	Guard Spring Housing Pin, 3/8″ x 2-1/4	0.03 lbs
27	939067-53	Guard Spring Bolt, 3/8″ x 2″	0.02 lbs
28	16355	Hanger Pin, 5/8″ x 3-1/8″	0.20 lbs
29	947128-140	Spiral Pin, (roll pin)	0.01 lbs
30	16683	Suspension Spring Housing	9.50 lbs
31	16378	Suspension Spring Shank	2.80 lbs
32	939484-8	Suspension Spring Shank Nut	0.08 lbs
33	939667-28	Cotter Pin	0.01 lbs
34	16446	Suspension Spring, Outer	8.68 lbs
35	27955	Suspension Spring, Inner	1.20 lbs
36	16682	Suspension Spring Washer	0.20 lbs
37	16379-1	Suspension Spring Housing Upper Cap with Eye Bolt and Nut	5.40 lbs
38	16380	Suspension Spring Housing Lower Cap	1.80 lbs
39	15495	Roller Shaft Alemite Nut	0.25 lbs
40	939537-61	Roller Shaft Elastic Stop Nut, 3/4″	0.20 lbs
41	939644-13	Roller Shaft Washer, 7/8″	0.10 lbs
42	16480	Idler Sprocket Adjustment Plate	0.60 lbs
43	939067-3	Idler Sprocket Adjustment Plate Capscrew, 3/8″ x 3/4″	0.02 lbs
44	30835	Front Idler Roller Assembly (PN. 72-35 thru 72-39)	6.05 lbs
45	15494-5	Front Idler Roller Shaft Assembly	1.45 lbs
46	30870	Idler Roller (Front)	1.80 lbs
47	15491	Idler Roller (Back)	2.40 lbs
48	979103-4	Idler Roller Bearing	1.40 lbs
49	941157-281	Idler Roller Bearing Retaining Ring	0.10 lbs
50	942685-118	Idler Roller Assembly Retaining Ring Set	0.01 lbs
51	30361	Back Idler Roller Assembly (PN. 72-41 and 72-36A thru 72-39)	5.05 lbs
52	30360-2	Back Idler Roller Shaft Assembly	1.50 lbs
53	940895-606	Key	0.01 lbs
54	15493-1	Idler Sprocket Assembly (PN. 72-43 thru 72-46)	6.53 lbs
55	15493	Idler Sprocket	5.13 lbs
56	942384-36	Outer Idler Sprocket Bearing	0.30 lbs
57	942394-42	Inner Idler Sprocket Bearing	0.20 lbs
58	15498	Idler Sprocket Bearing Retaining Washer	0.30 lbs
59	941157-231	Idler Sprocket Bearing Retaining Ring	0.10 lbs
60	15492-2	Idler Sprocket Roller Shaft Assembly (PN. 72-46A thru 72-50)	9.60 lbs
61	15496-5	Idler Sprocket Shaft Assembly	2.30 lbs
62	15492	Idler Sprocket Roller	4.75 lbs
63	979103-4	Idler Sprocket Roller Bearing	1.40 lbs
64	941157-281	Idler Sprocket Roller Bearing Retaining Ring	0.10 lbs
65	942685-114	Idler Sprocket Roller Assembly Retaining Ring	0.10 lbs
66	15500	Idler Sprocket Spacer	0.50 lbs
67	15533	Gear Shift Handle	1.50 lbs
68	15516	Gear Shift Handle Lock Pin	0.06 lbs
69	16977	Gear Shift Handle Lock Pin Spring	0.04 lbs
70	940323-4	Gear Shift Handle Grease Fitting	0.01 lbs
71	15534	Gear Shift Shaft	2.08 lbs
72	939484-5	Gear Shift Shaft Stover Nut, 5/8″	0.01 lbs
73	23056	Gear Shift Shaft Bushing	0.20 lbs
74	942271-11	Gear Shift Shaft “0” Ring	0.01 lbs
75	939995-812	Gear Shift Shaft Key	0.20 lbs
76	15501	Gear Shift Actuator Yoke	1.50 lbs
77	15502	Gear Shift Finger	0.35 lbs
78	15512	High Speed Driven Gear	4.00 lbs
79	15511-1	Low Speed Driven Gear Assembly (PN. 72-64 and 72-65)	9.35 lbs
80	15511	Low Speed Driven Gear	9.00 lbs
81	15537	Low Speed Driven Gear Bushing	0.25 lbs
82	15507	Low Speed Driven Gear Thrust Washer	0.50 lbs
83	979054-304	Sliding Gear Shaft Lower Bearing	0.40 lbs
84	979102-5304	Drive Shaft Lower Bearing	0.40 lbs
85	15505	Frame (Bottom) Gear Box Bearing Plate	0.40 lbs
86	16979	Frame (Bottom) Gear Box Bearing Plate Gasket	0.06 lbs
87	941271-25	Bearing Plate Capscrew, 1/4″ x 1/2″	0.02 lbs
88	940251-2	Gear Case Drain Plug, 1/4″	0.08 lbs
89	947915-11	Roller Chain Assembly with Connecting Link and Offset Link	21.00 lbs
90	17906-2	Outer Ring Assembly, (PN. 72-76 thru 72-80), models RSX & BTSX only	55.95 lbs
91	–	Outer Ring & Inner Ring Assembly, models RSX & BTSX only	81.00 lbs
92	17906	Outer Ring	41.00 lbs
93	17916	Outer Ring Large Roller	1.75 lbs
94	17917	Outer Ring Small Roller, qty 5 for model CTSX only	1.00 lbs
95	17918	Roller Bushing	0.50 lbs
96	17919	Roller Pin	0.80 lbs
97	940308-1	Grease Fitting	0.01 lbs
98	17921	Outer Ring Sprocket, 4-1/2 , models RSX & BTSX only	9.00 lbs
99	941237-75	Outer Ring Sprocket Bolt (Short) 1/2″ x 1-1/4″	0.10 lbs
100	941238-75S	Outer Ring Sprocket Bolt Set, models RSX & BTSX only	1.20 lbs
101	941237-108	Outer Ring Sprocket Bolt (Long) 1/2″ x 2″	0.30 lbs
102	941442-5	Lock Nut	0.10 lbs
103	943631-92	Outer Ring Sprocket Dowel Pin, 5/8″ x 3″	0.60 lbs
104	17907	Inner Ring, models RSX & BTSX only	15.00 lbs
105	30862	Brake Band Assembly, 5-1/2	2.80 lbs
106	15528	Brake Band Pin	0.60 lbs
107	939643-10	Star Washer	0.01 lbs
108	17920	Jaw and Bushing Pin, models RSX & BTSX only	0.75 lbs
109	943631-69	Gear Box Cover Dowel Pin, 5/8″ x 2″	0.30 lbs
110	32331-1	Front End Control Assembly, (Lever Style)	10.78 lbs
111	31312-1	Control Bracket Weldment, (Lever Style)	3.80 lbs
112	28019	Shift Bracket Weldment	1.80 lbs
113	28022	Shifter Rod Weldment	0.80 lbs
114	941439-2	Stover Locknut, 3/8	0.02 lbs
115	28023-1	Throttle Rod Weldment, (Lever Style), models RSX & CTSX only	2.00 lbs
116	939370-9	Washer, 3/8″	0.01 lbs
117	939667-10	Cotter Pin	0.01 lbs
118	28020	Clamp Plate	0.40 lbs
119	28021	Shifter Lever	0.60 lbs
120	941271-93	Hex Head Capscrew, 3/8″ x 1-1/2″	0.05 lbs
121	941442-3	Lock Nut, 3/8″	0.03 lbs
122	941271-93	Allen Head Capscrew, 3/8″ x 1-1/2″	0.05 lbs
123	939369-9	High Collar Lockwasher	0.01 lbs
124	940584-86-1	Shoulder Screw, 3/4″ x 3″	0.60 lbs
125	941442-6	Nut-Shoulder Screw, 5/8″	0.03 lbs
126	–	2-3/8 Jaw (less insert)	5.00 lbs
127	27477-1	2-3/8 Jaw Assembly	6.00 lbs
128	–	2-7/8 Jaw (less insert)	5.00 lbs
129	27481-1	2-7/8 Jaw Assembly	6.00 lbs
130	–	4 Jaw (less insert)	3.40 lbs
131	23624-1	4 Jaw Assembly	3.80 lbs
132	–	4-1/2 Jaw (less insert)	2.60 lbs
133	24553-1	4-1/2 Jaw Assembly	3.00 lbs
134	–	2-3/8 Bushing (less inserts)	9.00 lbs
135	27645-1	2-3/8 Bushing Assembly	11.20 lbs
136	–	2-7/8 Bushing (less inserts)	8.80 lbs
137	27660-1	2-7/8 Bushing Assembly	10.20 lbs
138	–	3-1/2 Bushing (less inserts)	8.40 lbs
139	17913-1	3-1/2 Bushing Assembly	8.80 lbs
140	–	4 Bushing (less inserts)	6.80 lbs
141	23623-1	4 Bushing Assembly	7.20 lbs
142	–	4-1/2 Bushing (less inserts)	5.00 lbs
143	24552-1	4-1/2 Bushing Assembly	5.25 lbs
144	27494-1	2-3/8 Insert	1.00 lbs
145	–	2-3/8 x 1 (1.315) Reducer Insert	1.60 lbs
146	–	2-3/8 x 1-1/4 Reducer Insert	1.40 lbs
147	–	2-3/8 x 1-1/2 Reducer Insert	1.40 lbs
148	–	2-3/8 x 2-1/16 Reducer Insert	1.20 lbs
149	27498-1	2-7/8 Insert	0.80 lbs
150	–	2-7/8 x 1-1/4 Reducer Insert	1.80 lbs
151	–	2-7/8 x 1-1/2 Reducer Insert	1.80 lbs
152	–	2-7/8 x 2-1/16 Reducer Insert	1.60 lbs
153	–	2-7/8 x 2-3/8 Reducer Insert	1.40 lbs
154	6473	3-1/2 Insert	0.20 lbs
155	6473	4 Insert	0.20 lbs
156	24554	4-1/2 Insert	0.10 lbs
157	–	Insert Retainer, 1/4 x 1 roll pin	0.01 lbs
158	–	Insert Retainer, 1/4 x 3/4 roll pin	0.01 lbs
159	–	Set Screw, 1/4-20 x 1/2	0.01 lbs