567 and 645 EMD engine model injectors
Custom Built Injectors – UTEX
The following parts are replaced on every injector:
| New Nozzle Tip, Plunger & Barrel, filters, spring, seat, o-ring, gaskets, and any other worn or damaged parts. Injector is dis-assembled, cleaned, worn parts replaced, injector is rebuilt and then calibrated back to OEM specs. |
INJECTOR | UTEX P/N | TIP | P & B | ENGINE | OUTPUT |
5227852+ | 5228703 | 5227853 | LOW | ||
5228815 | 5228703 | 5227853 | |||
5228565+ | 5228713 | 5227853 | 567A, B, BC, C | ||
5228810 | 5228713 | 5227853 | |||
5229295* | 5229235 | 5227853 | |||
| |||||
5228230+ | 5228703 | 5228236 | MEDIUM | ||
5228805 | 5228703 | 5228236 | |||
5228540+ | 5228713 | 5228236 | 8-567CR | ||
5228800 | 5228713 | 5228236 | 16-567C, D1 | ||
5229290* | 8478048 | 5229235 | 5228236 | D2 | |
| |||||
5228605+ | 5228713 | 5228574 | 567, D3, D3A | HIGH | |
5228750 | 5228713 | 5228574 | D4, D5, D6, E | ||
5229285* | 5229235 | 5228574 | |||
5229305 | 5229260 | 5227853 | |||
| |||||
5228895 | 5228898 | 5228894 | 645E3 THRU E9 | EXTRA | |
5229250* | 8478046 | 5229230 | 5228894 | HIGH | |
5229280 | 5229260 | 5227853 | |||
5229315 | 8478052 | 5229235 | 5228894 | ||
5229320 | 8478053 | 5229265 | 5229011 | ||
5229325 | 8478054 | 5229270 | 5229011 | ||
5229335 | 8478055 | 5229275 | 5229011 | 645E3B | |
5229500 | 9081163 | 5229260 | 5227853 | ||
5229510 | 9081164 | 5229260 | 5228236 | ||
5229710 | 9333858 | 5229275 | 5229705 | 645E3A THRU 645F | |
5226210 | 9561950 | 5229275 | 5226464 | 645F3 | |
| |||||
|---|---|---|---|---|---|
IMPROVED PERFORMANCE 5 HOLE TIP | |||||
5228820+ | 5228813 | 5227853 | 567BC, C | LOW | |
5229300+* | 5229195 | 5227853 | |||
| |||||
5228830 | 5228813 | 5228236 | 567C, D1 | MEDIUM | |
5229200* | 5229195 | 5228236 | 645E, E1, E2 | ||
| |||||
5229310* | 8478051 | 5229235 | 5228574 | 567,D3 | HIGH |
SUPERSEDES | D3A,D4,D5 | ||||
5229285 | D6 | ||||
