KJD20000 is completely interchangeable with FARR.
KJD 9625 9 5/8” casing tong ,MAIN tong complete with jaws from 4 1/2”-9 5/8” ( only jaws different from FARR, Others all same with FARR)
KHT 9625 9 5/8” casing tong is heavy duty updated from KJD9625 tong
KD13375 13 3/8” casing tong ,MAIN tong complete with jaws， VALVE,HYD MOTOR RANGE from 4 1/2”-13 3/8”
KHT13625 Casing power tong,WITHOUT BACKUP,interchangeable with MCCOY.Include lift cylinder, all jaws, auto control safety gate.
KHT5500 power tong（including Back up）
SE-16-25 POWER CASING TONG
SE-16-25 power casing tong is a copy of WEATHERFORD WFT 16-25 tong. It ranges from 4 -16inch.Standard size is 5 1/2- 13 3/8”. It provides 25000ft-lb torque capacity for running and pulling casing.
Please email us for more specification of our hyd casing power tong
hyd tubing tong
SE45 is a copy of the original BJTM RS chain driven tubing tong. All internal parts are interchangeable with BJTM RS family of tubing tongs. This makes replacement parts available from several sources; thus keeping the cost of replacement parts competitively priced. As well, replacement parts are more readily available.Jaw and bushing assemblies are not only interchangeable with BJTM, but also with the Oil CountryTM 45000 tubing tong. MS backup tong interchangeable as well. Same as RSX carter tong.
We are able to provide full line spare parts interchangeable with original for RSX,45000 tongs!
- Application Range:
(2) tubing (not for standard tongs): φ26mm (1.050″)、φ33mm(1.315″)
- Torque ranges available:
(1) standard: 1.6～6.3kN.m （1200～4650ft.lbs）
(2) high torque: 2.3～9kN.m （1700～6650ft.lbs）
- High and low rotating rates:
(1) standard: high: 83r/min;
(2)high-torque: high: 68r/min;
- System pressure: 14Mpa（2000psi）
- System oil supply: 50～120L/min（13～30gpm）
- Gross weight of tong: 350Kg（760lbs）
- Dimensions (length×width×height): 1300×680×380mm（511/4″×263/4″×15″）
SE58 Closed head Tubing Tong is with variable torque, hydraulic lift, Pressure oil bath lubrication, hardened internal gears, roller chain final drive and two-speed operation. Because they are closed head, the power tong stay on the pipe all the way up. You save time because you don’t have to remove and replace the tongs on the pipe after each joint is pulled. Every joint is gripped with a uniform, predetermined torque between 0.41～8.13kN.m (300～6000 ft. lbs), which is controlled by setting the pressure relief valve. It is interchangeable with foster tubing tong. We are able to provide same Jaw and bushing parts.
- Application Rang: 60～89mm (23/8″ ～ 5″） tubing
- Maximum passing diameter: 127mm (5″)
- Torque: 0.41～8.13kN.m (300～6000 ft. lbs)
- High Gear Rated Torque: 0.41～1.76kN.m (300～1300 ft. lbs)
- Low Gear Rated Torque: 8.13kN.m (6000 ft. lbs)
- High Gear Rated Speed: 126r/min Low Gear Rated Speed: 27r/min
- Total Length：1295mm (51″) Thickness of Master Tong: 242mm (91/2″)
High of Master Tong and Backup Tong: 425mm (163/4″)
- Maximum dimension of glide elevator: 762mm (30″)
- Versa dint of the knot tail rope: 930kg (2056lbs)
- Distance of between Tubing center and the knot tail rope: 762mm (30″)
- Weight： 456kg (1000lbs)
- Rated System Pressure: 13MPa (1880psi)
- Maximum Oil Supply: 126L/min (33.5gpm)
SE25 Sucker Rod Tong is a new pattern multi-purpose sucker rod hydraulic power tong. Inner Ring Assy’s & Backup wrenches interchangeable w/BJ M series rod tong.
1、Specially designed clamping mechanism to make up or break out fast and safely sucker rod or tubing of different sizes.
2、With the tong on the rod, adjust the leveling screw at the top of the hanger, so the tong hangs perfectly level while threading rods.
3、Advanced torque sensor system can actually display the right torque value when making up.
4、The master tong is equipped with an automatic safety-gate which has a function of safety and protection.
- Applicable range
(1) sucker rod： 5/8”-1 1/8”
(2) tubing φ26mm(1.050″) 、φ33mm(1.315″) 、
( Standard tong isn’t equipped with the tubing mechanism for making up or breaking out)
- maximum working torque：2.5KN·m (1850ft.lbs)
- Top speed of rotation：
4、maximum clamping tubing diameter： φ48 mm
5、working pressure： 7～12 MPa (1000～1700psi)
6、Oil supply of system：80～12 0L/min (20～30gpm)
7、Total weight of tong body ：170Kg(370 lbs)
8、Profile dimension (L×W×H):850×380×460mm (33.5″×15″×18″)
Hydraulic Power Unit
The hydraulic power unit mainly is to supply hydraulic source for power tong and its series. It also can cooperate with other hydraulic equipments. The power unit feathers such advantages as wide adjusting range, convenient adjusting and high generality, etc.
Hyd shift is a special tool to make up and break out drill pipe during drilling operation. It adapted durable roller type heavy duty chain to transfer power without changing any part during operation within application range.
|APLICATION RANGE||2 7/8-5 1/2”||2 7/8-9 1/2”|
|OUTPUT TORQUE RANGE||600-1085 FT-LB||600-1250 FT-LB|
|SPEED RANGE||70-130 RPM||39-130 RPM|
TQ series of hydraulic casing tongs are widely used for making-up or breaking-out of casings or pipes. The series of casing tongs are wholly hydraulic driven. The tongs are configured with a large-torque motor and perform mechanical gearchange. Structure is simple and operation is safe. The casing tongs can be supplied with torque device to perform computer monitoring and managing on pressure, torque and rounds. The casing tongs are designed and manufactured according to API Spec 7K standard.
|in||4-7||4-13 3/8||5 1/2-13 3/8||4-7||5 1/2-13 3/8||4-13 3/8||95/8″-20″|
|MAX PRESSURE OF HYD||mpa||18||16||18||18||17.2||18||20|
|Rated flow of hyd||L/min||114||114||114||114||120||114||170|
DRILL PIPE POWER TONGS
ZQ drill pipe power tong is an ideal well head tool for oil drilling, widely applied for making-up and breaking-out in offshore and onshore drilling operations and workover operations. Open-throat design of the ZQ series allows the tongs to escape from drilling pipe freely with high mobility. The tong is a combination of spinning tong and torque tong. It substitutes cathead, manual tong and rotary rope in making-up and breaking-out. The tongs are designed and manufactured according to API Spec 7K “Specification for Drilling Equipment”
|Speed (High gear)||rpm||65|
|Speed (Low gear0)||rpm||10.5|
|Speed (High gear)||rpm||60|
|Speed (Low gear0)||rpm||4.1|
|Speed (High gear)||rpm||40|
|Speed (Low gear0)||rpm||2.7|
|Speed (High gear)||rpm||40|
|Speed (Low gear0)||rpm||2.7|
ZQ162-50Ⅱ、ZQ203-100Ⅱ、ZQ203-125Ⅱ DRILL PIPE POWER TONGS
The type of drill pipe power tong marked with II means the the power tong is supplied with DS suspension device. The hanging height of the power tong can be adjusted by operating the manual control valve in the suspension device. It features the effect of safe, labor-saving, convenient, and reliable. ZQ203-125II drill pipe power tong is built with automatic door, and can realize combinated control on the clamping of the lower tong, the open and close of the door, and the moving of the tong body.
|Speed (High gear)||Rpm||60||40||40|
|Speed (Low gear0||Rpm||4.1||2.7||2.7|
ZQ203-100Ⅲ、ZQ203-125Ⅲ DRILL PIPE POWER TONGS and parts
ZQ series of drill pipe power tong marked with III are developed types from ZQ203-100 power tong. The power tong can be fixed on the accommodation track for front and back walk. It can pass across the well head and go to the mouse hole for working. Master tong can move upward and downward. Walk and lift of the tong can be remote controlled and automatically handled. Especially suitable for the location with small wellbay surface.
|Speed (High gear)||rpm||40||40|
|Speed (Low gear0||rpm||2.7||2.7|