Handlingtools9

Posted on by
DIES AND INSERTS
 

While running in or pulling out tubular at oil rigs the joints (tool joints) are tightened or loosened with the help of manual tongs or power tongs.
Dies are the principal element in the manual tongs or power tongs which carry out the job of gripping the tool joints, before torque application. (Rollers or chain are also used for gripping of tubular while using pipe spinners)
SHINEQUIP manufactures tong dies out of best quality alloy steel. The dies are case hardened to a desired depth, while leaving the inner portion (core) ductile. The hardened surface is highly resistant to wear and exhibits quality gripping of tool joints. The inner ductile core absorbs the shock of sudden impact and heavy torque. The combined effect is efficient operation in the long run. We make dies and inserts meet OEM specifications.

Full Circle Slip Inserts are available for Canvins “Advance” Spiders, Models

“B”, “C”, “C-HD”, “E”, and “G”

OEM PN#SIZE
65622-1003 1/2” slip body assembly
65652-12 3/8” insert
65652-22 7/8” insert
65652-33 1/2” insert
65623-1004 1/2” SLIP BODY assembly
65653-13 1/2” insert(tubing)
65653-24”insert(tubing)
65653-34 1/2”insert(tubing)
65624-4.754 3/4” Solid slip body assembly
65624-15” Solid slip body assembly
65624-25 1/2” Solid slip body assembly

 TONG DIES AND INSERT PACKAGE PARAMETERS

ITEMPN#TypeWEIGHT(KG)Amount per PLY Wooden case（piece）GW (KGS)Dimension of case (mm)Volume（m³）
145293А2 3/8″ А0.451000462570×500×4600.13
245293В  2 7/8″ В0.441000452570×500×4600.13
345293С  3 1/2″ С, 102 4″ Е0.163000492570×500×4600.13
445209452090.0726000444570×500×4600.13
565652-1   2 3/8″59.42204420570×500×460
665652-2  2 7/8″57.41.65252427.8570×500×460
765652-3   3 1/2″54.41.05405437.25570×500×460
845209 4520917.70.0726000444570×500×460
95517750-48-1     

CURVED-FACE DIES FOR POWER ROD TONGS

Rod SizeType DiePart No.Size InthesWEIGHTS
Each oz.Per Doz.In Lbs.
1.050”Buttress307263/8×1×1 7/1632
1.315”Buttress307243/8×1×1 7/1632
1.660”Buttress307233/8×1 3/4×1 7/1632
1.900”Buttress307213/8×1 1/4×1 7/1632

CURVED-FACE DIES FOR POWER TUBING TONGS

Tubing SizeType DiePart No.Size InthesWEIGHTS
Each oz.Per Doz.In Lbs.
2  7/8”9T-Buttress27498-13/4×2×3 7/8 

16

12
11T-Buttress  27498-2
2  3/8”9T-Buttress27494-13/4×2×3 7/8 

16

12
11T-Buttress27494-2
2  1/16”-2”8T-Buttress293113/4×1 5/8×3 7/8129
1.900”7T-Buttress293123/4×1 5/8×3 7/8129
1.660”5T-Buttress293131/2×1 1/4×3 7/886
1.315”4T-Buttress293781/2×1 ×3 7/864 1/2

CURVED-FACE DIES FOR POWER CASING TONGS

Casing Tong and SizeType DiePart No.Size InthesWEIGHTS
Each oz.Per Doz.In Lbs.
“CTS”:3 1/2”Plain309233/8×1×3 7/864 1/2
“CTS”:4”Plain308463/8×1×3 7/864 1/2
“CTS”:4 1/2”Plain311753/8×1 ×1 7/1532 1/4
“CTS”:4 1/2”

(Jaw)

Plain308473/8×1×2 5/843
“CTS”:4 1/2”

(Bush)

Plain308483/8×1×3 7/864 1/2
“CTS”:5”

(Jaw)

Plain308493/8×1×2 5/843
“CTS”:5”

(Bush)

Plain308503/8×1×3 7/864 1/2
“CTS”:5 1/2”

(Jaw)

Plain309253/8×1×2 5/843
“CTS”:5 1/2”

(Bush)

Plain309243/8×1×3 7/864 1/2
“CTS”:4 1/2-5”-5 〞-51/2”Plain308693/8×1×2 5/843

Including BJ Model “CTS”Casing and Tubing Tong, oil country 45000,RS, RSX TUBING TONG,

 

Place of use

 

Type of

Die

 

Part No

 

Size ,Inches

WEIQHTS
Each OzPer Doz.In Lbs.
BJ Type B Tongs

BJ Type DB Tongs made In 1965 and latter

Blue

Diamond

16402-61/2×1 1/4×5 7/8 

12

 

9

pyramid16402-2
BJ Types SOD ,C,F and LF Tongs

Type DB Tongs Mid

Prior to 1965;

BJ power Casing Tong(4 1/2”-13 3/8”);Lamb power Casing Tong

Blue Diamond16401-61/2×1 1/4×596 3/4
Pyramid16401-2
plain16401
Short Die for BJ Type B Tongs with 1 1/4 ” Slot: BJ Power Drill pipe Tong:

Echols Power Casing Tong

Pyramld24768-21/2×1 1/4×3 7/886
Coarse24768-8
plain24768
Half Die for BJ Type B Tong with 1 1/4” Slot or Short Die for BJ Types SOD, OB C F,LF Tongs with 1 1/4”SlotsPyramld24770-21/2×1 1/4×2 7/8 4 1/2
  6
 
Half Die for BJ Types SOD,DB ,C F and LF Tongs with 1 3/4 SlotPyramld24769-21/2×1 1/4 ×2 7/1653 3/4
  
Die Spacer for All Tongs with 1 1/4” SlotBlank247717/15×1 1/4×243
Tongs with 1”Slot”plain125123/8×1×5 3/486
Tongs with 1”Slot”plain156683/8×1×575 1/4
Tongs with 1”Slot”plain262123/8×1×4 1/464 3/4
BJ WilsonType ; Type MS and MS Back –upplain62093/8×1×1 15/1632
BJ Powalrmatic(142 and up): Super.Powalrmatic & Hydratorc Tongs 1.315”-4”w/1”Slotsplain64733/8×1×3 7/864 1/2
4 1/8”-4 1/2”Pipe sizes of above power tongspyramid24554-23/8×1×1 7/1632
plain245543/8×1×1 7/1532
BJ Types S and WS Tongsplain64723/8×5/8×1 15/161 1/21 1/4
BJ Type T Tongsplain116071/2×1/2×2 1/432
BJ Snapon Tubing Tongs; 1.660”-1.900”plain11607-41/2×1/2×1 5/821 1/2
2 3/8”-3 1/2”plain11607-31/2×1/2×221 3/4

Note: Die Gripping surface is made is following configurations and can be manufactured as per customer requirements. Add suffix for your requirement after basic part No.

SLIP DIES

J-2160SDS/SDML Drill Pipe Slip Insert 3-1/2″ x 2-3/8″
J-2161SDS/SDML Drill Pipe Slip Insert 3-1/2″ x 2-7/8″
J-2162SDS/SDML Drill Pipe Slip Insert 3-1/2″ x 3-1/2″
J-2163SDS/SDML/SDXL Drill Pipe Slip Insert 4-1/2″ x 3-1/2″
J-2164SDS/SDML/SDXL Drill Pipe Slip Insert 4-1/2″ x 4″
J-2165SDS/SDML/SDXL Drill Pipe Slip Insert 4-1/2″ X 4-1/2″
J-2166SDML/SDXL Drill Pipe Slip Insert 5″ x 4-1/2″
J-2167SDML/SDXL Drill Pipe Slip Insert 5″ x 5″
J-2168SDML/SDXL Drill Pipe Slip Insert 5″ x 4″
J-2169SDML/SDXL Drill Pipe Slip Insert 5-1/2″ x 5″
J-2170SDML/SDXL Drill Pipe Slip Insert 5-1/2″ x 5-1/2″
J-2619CMSXL Circular Button
J-2620DCS Circular Button
J-2625DCS-L Circular Button 11″ – 12-3/4″
J-2626CMSXL Circular Button 18-5/8″
J-2627DCS-L/CMSXL Circular Button
J-2628DCS/CMSXL Circular Button
J-2630DCS-L/CMSXL Circular Button
J-2631CMSXL Circular Button
J-7624-A-4Slip Insert c/w Cotter Type C safey clamp
J-7624-A-21Slip Insert c/w Cotter Type T safety clamp
J-3310MP Grip Die c/w Cotter Pin
J-7613-A-81DU Slip Insert 4-1/2″ x 4-1/2″
J-7613-FF-81DU Slip Insert 4-1/2″ x 4″
J-7613-C-82DU Slip Insert 4-1/2″ x 3-1/2″
J-7613-B-82DU Slip Insert 4-1/2″ x 2-7/8″
J-7613-H-81DU Slip Insert 5-1/2″ x 5-1/2″
J-7613-G-81DU Slip Insert 5-1/2″ X 5″
J-7613-E-81DU Slip Insert 5-1/2″ x 4-1/2″
J-7613-EE-81DU Slip Insert 7″ x 7″
J-7613-DD-81DU Reducer Insert 7″ X 6-5/8″
J-7613-Z-81DU Slip Insert 7″ x 5-1/2″
J-7502-A-5069TS-100 Slip Insert 3-1/2″
J-7502-A-5070TS-100 Slip Insert 2-7/8″
J-7502-A-5071TS-100 Slip Insert 2-3/8″
J-7502-A-26TS-100 Slip Insert 5-1/2″
J-7502-D-26TS-100 Slip Insert 5″
J-7502-C-26TS-100 Slip Insert 4-1/2″
J-7502-G-26TS-100 Slip Insert 4″
J-7502-F-26TS-100 Slip Insert 3-1/2″

 Tong Dies Used for Power Tongs Specifications:

Use for ProductsPipe Size(in)
XQ89/3YB

XQ89/3YC

Thin89 (3-1/2″)
Middle-thick73 (2-7/8″)
Extra-thick60 (2-3/8″)
XY114/6YBBig arc89 – 141.5 (3-1/2″ – 4-1/2″)
Small arc73 – 78 (2-7/8″ – 3″)
XQ140/12YⅠ73 – 78
Ⅱ89 – 114
Ⅲ121 – 156

 

Used for ProductPipe Size (in)Use for ProductPipe Size (in)
W-SDS Rotary Slips2-3/8″ – 4-1/2”9″ Drill Collar Slips9″
W-SDML Rotary Slips2-3/8″ – 5-1/2”Casing Slips6-5/8″ – 30″
W-SDXL Rotary Slips3-1/2″ – 5-1/2”WA-C Safety Clamps3-1/2″ – 15-5/8″
3-1/2 – 5 Rotary Slips3-1/2″ – 5″WA-T Safety Clamps1-1/8″ – 4-1/2″
5 – 7 Rotary Slips5″ – 7″QQP60-89/585Pneumatic Spider2-3/8″ – 3-1/2″
W3-1/2 /75 (125) Rotary Slips2-3/8″, 2-7/8″, 3-1/2”QQP60-89/675Pneumatic Spider2-3/8″ – 3-1/2″
W5 /75 (125.200) Rotary Slips4″, 4-1/2″, 5″QQP60-127/900 Pneumatic Spider2-3/8″ – 5″
DCS-S Drill Collar Slips3″ – 4-7/8”Well Repair Manual Tongs2-3/8″ – 10-3/4″
DCS-R Drill Collar Slips4-1/2″ – 7″B Manual Tongs3-3/8″ – 12-3/4″
DCS-L Drill Collar Slips6-3/4″ – 14″DB Manual Tongs3-1/2″ – 17″
WT Drill Collar Slips4-1/2″ – 11-3/4″13-3/8 Casing Manual Tongs13-3/8″
8″ Drill Collar Slips8″Q13-3/8 – 30 Casing Manual Tongs13-3/8″ – 30
Posted in InventoryList.