Handlingtoolsparts1

Handling Tools & Replacement Parts
USA Brand Handling Tools / Parts
Slips & Bowls Page
Ortco Slip & Bowl, 5-1/2” . . . . . . . . . . . . 1
Ortco Slip & Bowl, 4-1/2” . . . . . . . . . . . . 2
TS 100 Slip & Bowl, 3-1/2”. . . . . . . . . . . . 3
Rotary Slips
• Baash Ross DU Slips
DU Regular & Long, 4-1/2” . . . . . . . . . . 4
DU Regular & Long, 5-1/2” . . . . . . . . . . 5
DU Regular & Long, 7” . . . . . . . . . . . . 6
• Varco Rotary Slips
SDS, 3-1/2″ & 4-1/2″ . . . . . . . . . . . . . 7
SDML, 3-1/2″, 4-1/2″, 5″ & 5-1/2″ . . . . . . . 8
SDXL, 4-1/2″, 5″ & 5-1/2″ . . . . . . . . . . . 9
• Woolley Rotary Slips
Type B, 4-1/2″ Short & Long. . . . . . . . . 10
Type B, 5-1/2″ Slip. . . . . . . . . . . . . . 10
Type XL Slip . . . . . . . . . . . . . . . . . 10
Manual Tongs
• BJ Tongs
SDD Tong . . . . . . . . . . . . . . . . . . 11
DB Tong . . . . . . . . . . . . . . . . . . . 12
B Tong . . . . . . . . . . . . . . . . . . . . 13
C Tong . . . . . . . . . . . . . . . . . . . . 14
• Web Wilson Tongs
AAX Tong . . . . . . . . . . . . . . . . . . 15
AAX Casing Tong . . . . . . . . . . . . . . 15
H, B, C & D Tongs . . . . . . . . . . . . . . 15
Elevators
• BJ Elevators
TA-35, TA-65, TA-100, TA-150. . . . . . .16-17
MG, RG, MGG, GG . . . . . . . . . . . .18-20
SLX-100, 150, 350, 500 . . . . . . . . . . . 21
Elevator Bore Code Chart . . . . . . . . . . 22
Slip Type Elevator Page
• BJ Slip Type Elevator
LYT Slip Elevator . . . . . . . . . . . . . . 23
MYT Slip Elevator . . . . . . . . . . . . . . 24
YT Slip Elevator . . . . . . . . . . . . . . . 25
YC Slip Elevator . . . . . . . . . . . . . .26-27
Casing Slips
• Baash Ross UC-3 & UC-4 . . . . . . . . . . . 28
• Varco CMS-XL . . . . . . . . . . . . . . . . 29
Drill Collar Slips
• Baash Ross C & C-1 . . . . . . . . . . . . . 30
• Varco DCS-S, DCS-R, DCS-L . . . . . . . . . 31
• Woolley Type A Drill Collar Slip . . . . . . . . 31
Safety Clamps.
• Baash Ross Type C . . . . . . . . . . . . . . 32
• Baash Ross Type T . . . . . . . . . . . . . . 33
• Varco MP-S, MP-R, MP-M, MP-L, MP-XL . . . 34
• Varco MP Replacement Parts . . . . . . . . . 35
Tubing Spiders
• BJ
50 Ton . . . . . . . . . . . . . . . . . . . . 37
100 Ton . . . . . . . . . . . . . . . . . . . 37
• Cavins
Model B . . . . . . . . . . . . . . . . . .38-39
Model C . . . . . . . . . . . . . . . . . .38-39
• GS-60 . . . . . . . . . . . . . . . . . . . .40-42
Guiberson T-60 (F-1) . . . . . . . . . . . . . 43
Oil Country Type G . . . . . . . . . . . . . . 44
Sucker Rod Elevators
• Solid & Plate Type Rod Elevator. . . . . . . . 45

Ortco 5-1/2” Bowl & Slip
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Bowl & Slip Assemblies
010-0200N/ABowl, 5-1/2”213.01A/R
010-1010N/ASlip Assembly, 5-1/2” (Less Inserts)70.01A/R
Replacement Parts
010-1210N/ASlip Handle Assembly21.01A/R
010-1410N/ASlip Segment (Set of 6)8.01A/R
010-1800N/AInsert Retainer Screw0.26A/R
010-9710N/ASegment Retainer Screw0.36A/R
010-1100N/AHinge Pin4.01A/R
010-7910N/APull Pin with Chain4.51A/R
Replacement Inserts
12-2908N/AInsert for Slips, 5-1/2″ x 2-7/8″2.81212
12-2909N/AInsert for Slips, 5-1/2″ x 3″2.81212
12-2910N/AInsert for Slips, 5-1/2″ x 3-1/8″2.51212
12-2911N/AInsert for Slips, 5-1/2″ x 3-1/4″2.11212
12-29137613-E-82Insert for Slips, 5-1/2″ x 3-1/2″2.31212
12-2915N/AInsert for Slips, 5-1/2″ x 3-3/4″2.21212
12-29177613-D-81Insert for Slips, 5-1/2″ x 4″2.01212
12-2918N/AInsert for Slips, 5-1/2″ x 4-1/8″2.11212
12-2919N/AInsert for Slips, 5-1/2″ x 4-1/4″2.01212
12-2920N/AInsert for Slips, 5-1/2″ x 4-3/8″2.01212
12-29217613-E-81Insert for Slips, 5-1/2″ x 4-1/2″2.01212
12-29237613-F-81Insert for Slips, 5-1/2″ x 4-3/4″2.01212
12-29257613-G-81Insert for Slips, 5-1/2″ x 5″1.51212
12-29297613-H-81Insert for Slips, 5-1/2″ x 5-1/2″1.01212
Ortco 4-1/2” Bowl & Slip
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Bowl & Slip Assemblies
020-0200N/ABowl, 4-1/2”155.01A/R
020-1400N/ASlip Assembly, 4-1/2” (Less Inserts)60.01A/R
Replacement Parts
020-1200N/ASlip Handle Assembly, 4-1/2″20.01A/R
020-1400N/ASlip Segments (Set of 6)40.01A/R
020-1800N/AInsert Retainer Pin with Cotter0.26A/R
020-9700N/ASegment Retainer Screw0.26A/R
020-1100N/AHinge Pin for 4-1/2″ Slip3.51A/R
020-7900N/APull Pin with Chain3.81A/R
Replacement Inserts
12-21047613-H-82Insert for Slips, 4-1/2″ x 1-1/2″2.71212
12-21057613-N-82Insert for Slips, 4-1/2″ x 2″2.51212
12-21067613-M-82Insert for Slips, 4-1/2″ x 2-1/16″2.51212
12-21077613-A-82Insert for Slips, 4-1/2″ x 2-3/8″2.21212
12-21087613-B-82Insert for Slips, 4-1/2″ x 2-7/8″2.01212
12-2110N/AInsert for Slips, 4-1/2″ x 3-1/8″1.51212
12-21137613-C-82Insert for Slips, 4-1/2″ x 3-1/2″1.51212
12-2115N/AInsert for Slips, 4-1/2″ x 3-3/4″1.51212
12-21177613-FF-81Insert for Slips, 4-1/2″ x 4″1.01212
12-21217613-A-81Insert for Slips, 4-1/2″ x 4-1/2″0.71212
3-1/2” (TS-100) Bowl & Slip
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Bowl & Slips Assemblies
030-02007502-100Tubing Spider Bowl, 3-1/2”187.01A/R
030-10007502-104Slip Assembly, 3-1/2” (Less Inserts)51.01A/R
Replacement Parts
030-14007502-C-217Right Segment13.01A/R
030-14057502-B-217Center Segment13.01A/R
030-14107502-A-217Left Segment13.01A/R
030-11007502-A-216Hinge Pin with Cotter0.42A/R
030-79007502-D-203Lock Pin with Bail & Chain5.01A/R
030-11057502-A-202Hinge Pin for Bowl2.01A/R
030-20007502-A-207Latch0.51A/R
030-12007502-A-214Latch Handle3.01A/R
030-79057502-B-207Latch Pin with Cotter0.51A/R
030-95007502-C-207Latch Spring0.22A/R
030-18007502-B-216Liner Retainer Pin with Cotter0.23A/R
030-17007502-203-XRetaining Ring for Bowl Hinge Pin0.51A/R
Replacement Inserts
030-13017502-A-5077Insert for Slips, 3-1/2″ x 3/4″2.199
030-13027502-A-5076Insert for Slips, 3-1/2″ x 1″2.799
030-13037502-A-5075Insert for Slips, 3-1/2″ x 1-1/4″2.599
030-13047502-A-5074Insert for Slips, 3-1/2″ x 1-1/2″2.299
030-13057502-A-5073Insert for Slips, 3-1/2″ x 2″2.099
030-13067502-A-5072Insert for Slips, 3-1/2″ x 2-1/16″2.099
030-13077502-A-5071Insert for Slips, 3-1/2″ x 2-3/8″1.799
030-13087502-A-5070Insert for Slips, 3-1/2″ x 2-7/8″1.599
030-1309N/AInsert for Slips, 3-1/2″ x 3″1.299
030-1310N/AInsert for Slips, 3-1/2″ x 3-1/8″1.199
030-1311N/AInsert for Slips, 3-1/2″ x 3-1/4″1.199
030-1312N/AInsert for Slips, 3-1/2″ x 3-3/8″1.299
030-13137502-A-5069Insert for Slips, 3-1/2″ x 3-1/2″1.299
Baash Ross 4-1/2” DU Regular & Long Rotary Slips
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
4-1/2” Rotary Slips
100-10007613-59DU Regular Slip with Steel Handles (Less Inserts), 4-1/2”123.01A/R
100-10057613-5041DU Regular Slip with Safety Handles (Less Inserts), 4-1/2123.01A/R
101-10007613-64DU Long Slip with Steel Handles (Less Inserts), 4-1/2”150.01A/R
101-10107613-5044DU Long Slip with Safety Handle (Less Inserts), 4-1/2”150.01A/R
Replacement Parts
12-1200-17613-A-157Universal Handle for DU Slips4.01A/R
12-1200-27613-5187Front Handle4.02A/R
12-1200-37613-5195Stirrup (Rear) Handle4.01A/R
12-1205-037613-5190Set, Universal Safety Flex Handles (3 pcs)18.1A/R
12-13007613-B-12Handle Pin, Front0.22A/R
12-13057613-C-12Handle Pin, Rear3.71A/R
12-11057613-A-12Hinge Pin with Cotter1.22A/R
12-95007613-211Hinge Spring Assembly1.22A/R
12-1800*7613-A-52Liner Retainer Key for DU Regular Slips1.53A/R
12-1810*7613-A-67Liner Retainer Key for DU Long Slip1.73A/R
‘Oversized Liner Keys available in .010”, .020” & .030”.
Replacement Inserts
12-2103N/AInsert for Slips, 4-1/2″ x 1-1/4″2.818 Reg / 24 LongA/R
12-21047613-H-82Insert for Slips, 4-1/2″ x 1-1/2″2.718 Reg / 24 LongA/R
12-21057613-N-82Insert for Slips, 4-1/2″ x 2″2.518 Reg / 24 LongA/R
12-21067613-M-82Insert for Slips, 4-1/2″ x 2-1/16″2.518 Reg / 24 LongA/R
12-21077613-A-82Insert for Slips, 4-1/2″ x 2-3/8″2.218 Reg / 24 LongA/R
12-21087613-B-82Insert for Slips, 4-1/2″ x 2-7/8″2.018 Reg / 24 LongA/R
12-2110N/AInsert for Slips, 4-1/2″ x 3-1/8″1.518 Reg / 24 LongA/R
12-21137613-C-82Insert for Slips, 4-1/2″ x 3-1/2″1.518 Reg / 24 LongA/R
12-21177613-FF-81Insert for Slips, 4-1/2″ x 4″1.018 Reg / 24 LongA/R
12-2119N/AInsert for Slips, 4-1/2″ x 4-1/4″0.818 Reg / 24 LongA/R
12-21217613-A-81Insert for Slips, 4-1/2″ x 4-1/2″0.718 Reg / 24 LongA/R
Baash Ross 5-1/2” DU Regular & Long Rotary Slips
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Parts
12-1200-17613-A-157Universal Handle4.01A/R
12-1200-27613-5187Front Handle4.02A/R
12-1200-37613-5159Stirrup (Rear) Handle4.01A/R
12-1205-037613-5190Set, Universal Safety Flex Handles (3 pcs)18.1A/R
12-13007613-B-12Handle Pin, Front0.22A/R
12-13057613-C-12Handle Pin, Rear0.31A/R
12-11057613-A-12Hinge Pin with Cotter1.22A/R
12-95007613-211Hinge Spring Assembly1.22A/R
12-1800*7613-A-52Liner Retainer Key For DU Regular Slips1.53A/R
12-1810*7613-A-67Liner Retainer Key For DU Long Slip1.73A/R
‘Oversized Liner Keys available in .010”, .020” & .030”.
Replacement Inserts
12-2908N/AInsert for Slips, 5-1/2″ x 2-7/8″2.818 Reg / 24 Long18/24
12-2909N/AInsert for Slips, 5-1/2″ x 3″2.818 Reg / 24 LongA/R
12-2910N/AInsert for Slips, 5-1/2″ x 3-1/8″2.518 Reg / 24 LongA/R
12-2911N/AInsert for Slips, 5-1/2″ x 3-1/4″2.118 Reg / 24 LongA/R
12-29137613-E-82Insert for Slips, 5-1/2″ x 3-1/2″2.218 Reg / 24 LongA/R
12-2915N/AInsert for Slips, 5-1/2″ x 3-3/4″2.118 Reg / 24 LongA/R
12-29177613-D-81Insert for Slips, 5-1/2″ x 4″2.118 Reg / 24 LongA/R
12-2918N/AInsert for Slips, 5-1/2″ x 4-1/8″2.118 Reg / 24 LongA/R
12-2919N/AInsert for Slips, 5-1/2″ x 4-1/4″2.018 Reg / 24 LongA/R
12-2920N/AInsert for Slips, 5-1/2″ x 4-3/8″2.018 Reg / 24 LongA/R
12-29217613-E-81Insert for Slips, 5-1/2″ x 4-1/2″2.018 Reg / 24 LongA/R
12-29237613-F-81Insert for Slips, 5-1/2″ x 4-3/4″2.018 Reg / 24 LongA/R
12-29257613-G-81Insert for Slips, 5-1/2″ x 5″1.518 Reg / 24 LongA/R
12-29297613-H-81Insert for Slips, 5-1/2″ x 5-1/2″1.018 Reg / 24 LongA/R
Baash Ross 7” DU Regular & Long Rotary Slips
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Parts
12-1200-17613-A-157Universal Handle4.01A/R
12-1200-27613-5187Front Handle4.02A/R
12-1200-37613-5159Stirrup (Rear) Handle4.01A/R
12-1205-037613-5190Set, Universal Safety Flex Handles (3 pcs)18.1A/R
12-13007613-B-12Handle Pin, Front0.22A/R
12-13057613-C-12Handle Pin, Rear0.31A/R
12-95007613-211Hinge Spring Assembly1.22A/R
12-11057613-A-12Hinge Pin with Cotter1.22A/R
12-1800*7613-A-52Liner Retainer Key For DU Regular Slips1.53A/R
12-1810*7613-A-67Liner Retainer Key For DU Long Slip1.73A/R
‘Oversized Liner Keys available in .010”, .020” & .030”.
Replacement Inserts
12-38217613-W-81Insert for Slips, 7″ x 4-1/2″4.218 Reg / 24 LongA/R
12-38257613-Y-81Insert for Slips, 7″ x 5″3.718 Reg / 24 LongA/R
12-38297613-Z-81Insert for Slips, 7″ x 5-1/2″3.218 Reg / 24 LongA/R
12-38317613-BB-81Insert for Slips, 7″ x 5-3/4″3.118 Reg / 24 LongA/R
12-38337613-CC-81Insert for Slips, 7″ x 6″2.518 Reg / 24 LongA/R
12-38357613-DD-81Insert for Slips, 7″ x 6-5/8″1.718 Reg / 24 LongA/R
12-38387613-EE-81Insert for Slips, 7″ x 7″1.218 Reg / 24 LongA/R
Varco SDS Rotary Slips
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
3-1/2” Rotary Slips
110-10003912SDS Slip Complete (Less Inserts), 3-1/2”1 09.01A/R
110-10073901SDS Slip Complete (with Inserts), 3-1/2″ x 2-3/8″117.01A/R
110-10083903SDS Slip Complete (with Inserts), 3-1/2″ x 2-7/8″111.01A/R
110-10133905SDS Slip Complete (with Inserts), 3-1/2″ x 3-1/2″117.01A/R
4-1/2”Rotary Slips
111-10003906SDS Slip Complete (Less Inserts), 4-1/2″115.01A/R
111-10133907SDS Slip Complete (with Inserts), 4-1/2″ x 3-1/2″143.01A/R
111-10173909SDS Slip Complete (with Inserts), 4-1/2″ x 4″136.01A/R
111-10213911SDS Slip Complete (with Inserts), 4-1/2″ x 4-1/2″127.01A/R
Replacement Parts
36-37673767Right Handle3.51A/R
36-37663766Center/Rear Handle4.01A/R
36-37683768Left Handle3.51A/R
36-1200-03NASet, Safety Flex Handles (3 pcs)12.1A/R
36-37693769Handle Pin with Cotter & Washer0.53A/R
36-21902190Hinge Pin with Cotter Pin1.22A/R
36-37383738Insert Retainer Ring, 3-1/2”1.03A/R
36-37393739Insert Retainer Ring, 4-1/2”1.03A/R
36-37373737Kit, 6 Bolts & Nuts & 1 Allen Wrench0.21A/R
3-1/2” Replacement Inserts
36-21602160Insert for Varco Slips, 3-1/2″ x 2-3/8″0.92424
36-21612161Insert for Varco Slips, 3-1/2″ x 2-7/8″0.62424
36-21622162Insert for Varco Slips, 3-1/2″ x 3-1/2″0.42424
4-1/2” Replacement Inserts
36-21632163Insert for Varco Slips, 4-1/2″ x 3-1/2″0.93636
36-21642164Insert for Varco Slips, 4-1/2″ x 4″0.63636
36-21652165Insert for Varco Slips, 4-1/2″ x 4-1/2″0.43636
Varco SDML Rotary Slips
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
3-1/2”, 4-1/2”, 5” and 5-1/2” Rotary Sips
112-100015522-1SDML Slip Complete (Less Inserts), 3-1/2”170.01A/R
112-100715524SDML Slip Complete (with Inserts), 3-1/2″ x 2-3/8″193.01A/R
112-100815523SDML Slip Complete (with Inserts), 3-1/2″ x 2-7/8″188.01A/R
112-101315522SDML Slip Complete (with Inserts), 3-1/2″ x 3-1/2″180.01A/R
113-100015565-1SDML Slip Complete (Less Inserts), 4-1/2″1 73.01A/R
113-101315563SDML Slip Complete (with Inserts), 4-1/2″ x 3-1/2″207.01A/R
113-101715564SDML Slip Complete (with Inserts), 4-1/2″ x 4″199.01A/R
113-102115565SDML Slip Complete (with Inserts), 4-1/2″ x 4-1/2″188.01A/R
114-100015569-1SDML Slip Complete (Less Inserts), 5”1 70.01A/R
114-101715567SDML Slip Complete (with Inserts), 5″ x 4″204.01A/R
114-102115568SDML Slip Complete (with Inserts), 5″ x 4-1/2″196.01A/R
114-102515569SDML Slip Complete (with Inserts), 5″ x 5″204.01A/R
115-100015573-1SDML Slip Complete (Less Inserts), 5-1/2″1 66.01A/R
115-102115571SDML Slip Complete (with Inserts), 5-1/2″ x 4-1/2″200.01A/R
115-102515572SDML Slip Complete (with Inserts), 5-1/2″ x 5″192.01A/R
115-102915573SDML Slip Complete (with Inserts), 5-1/2″ x 5-1/2″181.01A/R
Replacement Parts
36-37673767Right Handle3.51A/R
36-37663766Center/Rear Handle4.01A/R
36-37683768Left Handle3.51A/R
36-1200-03NASet, Safety Flex Handles (3 pcs)12.1A/R
36-37693769Handle Pin with Cotter & Washer0.53A/R
36-21922192Hinge Pin with Cotter1.22A/R
36-37383738Insert Retainer Ring, 3-1/2′1.03A/R
36-37393739Insert Retainer Ring, 4-1/2”1.03A/R
36-37413741Insert Retainer Ring, 5”1.03A/R
36-37403740Insert Retainer Ring, 5-1/2”1.23A/R
36-37453745Insert Retainer Screw with Washer0.36A/R
36-37373737Kit, 6 Bolts & Nuts & 1 Allen Wrench0.31A/R
3-1/2” Replacement Inserts
36-21602160Insert for Slips, 3-1/2″ x 2-3/8″0.93030
36-21612161Insert for Slips, 3-1/2″ x 2-7/8″0.63030
36-21622162Insert for Slips, 3-1/2″ x 3-1/2″0.43030
4-1/2” Replacement Inserts
36-21632163Insert for Slips, 4-1/2″ x 3-1/2″0.94545
36-21642164Insert for Slips, 4-1/2″ x 4″0.64545
36-21652165Insert for Slips, 4-1/2″ x 4-1/2″0.44545
5” & 5-1/2” Replacement Inserts
36-21682168Insert for Slips, 5″ x 4″0.94545
36-21662166Insert for Slips, 5″ x 4-1/2″0.64545
36-21672167Insert for Slips, 5″ x 5″0.44545
36-21682168Insert for Slips, 5-1/2″ x 4-1/2″0.94545
36-21692169Insert for Slips, 5-1/2″ x 5″0.64545
36-21702170Insert for Slips, 5-1/2″ x 5-1/2″0.44545
Varco SDXL Rotary Slips
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
4-1/2”, 5” and 5-1/2” Rotary Sips
116-100015562SDXL Slips Complete (Less Inserts), 4-1/2”182.01A/R
116-101315515VSDXL Slips Complete (with Inserts), 4-1/2″ x 3-1/2″229.01A/R
116-101715514SDXL Slips Complete (with Inserts), 4-1/2″ x 4″219.01A/R
116-102115513VSDXL Slips Complete (with Inserts), 4-1/2″ x 4-1/2″205.01A/R
117-100015566SDXL Slips Complete (Less Inserts), 5″193.01A/R
117-101715518SDXL Slips Complete (with Inserts), 5″ x 4″237.01A/R
117-102115517SDXL Slips Complete (with Inserts), 5″ x 4-1/2″227.01A/R
117-102515516VSDXL Slips Complete (with Inserts), 5″ x 5″213.01A/R
118-100015570SDXL Slips Complete (Less Inserts), 5-1/2″193.01A/R
118-101715521SDXL Slips Complete (with Inserts), 5-1/2″ x 4-1/2″234.01A/R
118-102515520SDXL Slips Complete (with Inserts), 5-1/2″ x 5″221.01A/R
118-102915519VSDXL Slips Complete (with Inserts), 5-1/2″ x 5-1/2″210.01A/R
Replacement Parts
36-37673767Right Handle3.51A/R
36-37663766Center/Rear Handle4.01A/R
36-37683768Left Handle3.51A/R
36-1200-03NASet, Safety Flex Handles (3 pcs)12.1A/R
36-37693769Handle Pin with Cotter & Washer0.53A/R
36-21922192Hinge Pin with Cotter1.22A/R
36-37393739Insert Retainer Ring, 4-1/2”1.03A/R
36-37413741Insert Retainer Ring, 5”1.03A/R
36-37403740Insert Retainer Ring, 5-1/2”1.23A/R
36-37453745Insert Retainer Screw with Washer0.36A/R
36-37373737Kit, 6 Bolts & Nuts & 1 Allen Wrench0.31A/R
4-1/2” Replacement Inserts
36-21632163Insert for Varco Slips, 4-1/2″ x 3-1/2″0.95454
36-21642164Insert for Varco Slips, 4-1/2″ x 4″0.65454
36-21652165Insert for Varco Slips, 4-1/2″ x 4-1/2″0.45454
5” Replacement Inserts
36-21682168Insert for Varco Slips, 5″ x 4″0.95454
36-21662166Insert for Varco Slips, 5″ x 4-1/2″0.65454
36-21672167Insert for Varco Slips, 5″ x 5″0.45454
5-1/2” Replacement Inserts
36-21682168Insert for Varco Slips, 5-1/2″ x 4-1/2″0.95454
36-21692169Insert for Varco Slips, 5-1/2″ x 5″0.65454
36-21702170Insert for Varco Slips, 5-1/2″ x 5-1/2″0.45454
4-1/2” & 5-1/2” Woolley B Rotary Slips
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
4-1/2” Rotary Slips
120-1000738-144-0100Short Slip, 4-1/2” Complete (Less Inserts)99.01A/R
121-1000N/ALong Slip, 4-1/2” Complete (Less Inserts)114.01A/R
4-1/2” & 5-1/2” Replacement Parts
42-1200737-000-0300Right Handle for 4-1/2″ & 5-1/2″ B Slips5.01A/R
42-1205737-000-0200Center Handle for 4-1/2″ & 5-1/2″ B Slips5.01A/R
42-1210737-000-0100Left Handle for 4-1/2″ & 5-1/2″ B Slips5.01A/R
42-1250-03737-100-0203Set, Safety Flex Handles (3 pcs)15.1A/R
42-1100737-000-0500Hinge Pin for 4-1/2″ & 5-1/2″ B Slips1.02A/R
42-1300737-000-0400Handle Pin for 4-1/2″ & 5-1/2″ B Slips0.23A/R
42-1800737-000-0600Insert Retainer Pin for 4-1/2″ & 5-1/2″ B Slips0.23A/R
4-1/2” Replacement Inserts
120-2106N/AInsert for Woolley Type B, 4-1/2″ x 2-1/16″2.518 Reg / 24 LongA/R
120-2107757-044-0123Insert for Woolley Type B, 4-1/2″ x 2-3/8″2.218 Reg / 24 LongA/R
120-2108757-044-0127Insert for Woolley Type B, 4-1/2″ x 2-7/8″2.018 Reg / 24 LongA/R
120-2113757-044-0134Insert for Woolley Type B, 4-1/2″ x 3-1/2″1.618 Reg / 24 LongA/R
120-2117757-044-0140Insert for Woolley Type B, 4-1/2″ x 4″1.218 Reg / 24 LongA/R
120-2121757-044-0144Insert for Woolley Type B, 4-1/2″ x 4-1/2″0.818 Reg / 24 LongA/R
5-1/2” Replacement Inserts
122-2917757-054-0140Insert for Woolley Type B, 5-1/2″ x 4″3.02424
122-2921757-054-0144Insert for Woolley Type B, 5-1/2″ x 4-1/2″2.32424
122-2925757-054-0150Insert for Woolley Type B, 5-1/2″ x 5″2.02424
122-2929757-054-0154Insert for Woolley Type B, 5-1/2″ x 5-1/2″1.32424
4-1/2” & 5” Woolley XL Rotary Slips
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
4-1/2” & 5” Replacement Parts
42-1105737-344-0500Hinge Pin for Woolley XL Slips1.02A/R
42-1805737-000-1100Insert Retaining Pin0.53A/R
42-1230-03NASet, Safety Flex Handles (3 pcs)12.1A/R
4-1/2” Replacement Inserts
123-2113757-044-0334Insert, 4-1/2″ x 3-1/2″3.52424
123-2117757-044-0340Insert, 4-1/2″ x 4″1.82424
123-2121757-044-0344Insert, 4-1/2″ x 4-1/2″1.32424
5” Replacement Inserts
124-2517757-050-0340Insert, 5″ x 4″2.22424
124-2521757-050-0344Insert, 5″ x 4-1/2″1.82424
124-2525757-050-0350Insert, 5″ x 5″1.42424
SDD Manual Tong
The SDD Tong covers drill pipe or casing sizes from 4″ to 17″ OD. This Tong is made from alloy steel, heat treated and magnetic
particle inspected. All steel specifications are certified. The SDD Tong is rated for 100,000 FT/LBS. Torque.
CAT. #OEM #DESCRIPTIONQTY REQWT/LBS
131-100031054Tong Complete with Long Lever (Less Lug Jaws)1528.00
Item #Cat #Ref #DescriptionQtyWt/ LbsItem #Cat #Ref #DescriptionQtyWt/Lbs
131-210031055-1Lever Assembly1191.01210-9940N/AClevis Assembly (BVM – Optional)12.00
1131-210531055Lever1183.0131-200531058-1Latch Assembly148.0
210-192024529Tong Line Retainer (BJ – Woolley)11.6013131-200031058Latch147.0
10-240024249Tong Line Retainer Bolt (BJ – Woolley)11.201410-791024526Latch Spring Plunger11.20
2131-970055653Tong Line Pin (BVM)17.001510-792024530Latch Spring Plunger Pin10.50
3131-970555654Tong Line Pin Nut & Bolt11.001610-951024525Latch Spring10.20
10-680026782Hanger Assembly156.017131-551531057-1Short Jaw Assembly188.0
410-681026783Hanger145.018131-551031056-1Long Jaw Assembly1140.0
510-970012586Hanger Balancing Screw13.001952-017016401-2Tong Die, 1/2″ x 1-1/4″ x 530.75
610-990012863Suspension Ring11.002010-180017194Tong Die Retainer Pin60.10
710-9760939055-576Hanger Balancing Screw Bolt10.5021131-560031059-1Lug Jaw, 4″ to 8-1/2″1138.0
10-9725939484-8Hanger Balancing Screw Bolt Nut10.3022131-560531060Lug Jaw, 8-1/2″ to 12″197.0
897-35-2824-33939107-551Hanger Bolt11.0023131-561031061Lug Jaw, 12″ to 15″1130.0
97-44-2800-33940985-8Hanger Bolt Nut10.5024131-561531063Lug Jaw, 15-3/4″1156.0
997-87-2828-33939168-133Hanger Adjustment Screw10.8025131-562031062Lug Jaw, 16″ to 17″1120.0
97-46-2800-33939248-8Hanger Jam Nut20.30131-550531065-1*Hinge Jaw Assembly198.0
10131-110531064Threaded Hinge Pin46.00(*Required for Jaw Sizes of 8-1/2″ to 17″) –
1110-120024528Hinge Pin Nut41.00110-991524747Tong Pull Back (optional)12.50 |
DB Manual Tong
The DB Tong covers drill pipe or casing sizes from 3-1/2″ to 17″ OD. This Tong is made from alloy steel, heat treated and
magnetic particle inspected. All steel specifications are certified. The DB Tong is rated for 65,000 FT/LBS. Torque.
CAT. #OEM #DESCRIPTIONQTY REQWT/LBS
134-100030111Tong Complete with Long Lever (Less Lug Jaws)1412.0
Item #Cat #Ref #DescriptionQtyWt/LbsItem #Cat #Ref #DescriptionQtyWt/Lbs
134-210025854-1Lever Assembly1140.01210-9940N/AClevis Assembly (BVM – Optional)12.00
1134-210525854Lever1135.0134-200025853-1Latch Assembly137.0
210-192024529Tong Line Retainer (BJ – Woolley)11.6013134-200525853Latch135.0
310-240024249Tong Line Ret. Bolt (BJ – Woolley)11.201410-791024526Latch Spring Plunger11.20
2134-970055653Tong Line Pin (BVM)17.001510-792024530Latch Spring Plunger Pin10.50
3134-970555654Tong Line Pin Nut & Bolt (BVM)11.001610-951024525Latch Spring10.10
10-680026782Hanger Assembly156.017134-550030065-2Short Jaw Assembly152.0
410-681026783Hanger145.018134-550530064-2Long Jaw Assembly1119.0
510-970012586Hanger Balancing Screw13.001952-017116402-2Tong Die, 1/2” x 1-1/4″ x 5-7/8″55.00
610-990012863Suspension Ring11.002010-180017194Die Retainer Pin100.10
710-9760939055-576Hanger Balancing Screw10.5097-90-0406939667-16Die Retainer Cotter Pin100.06
10-9725939484-8Hanger Balancing Screw Nut10.3022134-562030062-2Lug Jaw, 3-1/2″ to 8-1/4″185.0
897-35-2824-33939107-551Hanger Bolt11.0023134-563030066-2Casing Lug Jaw 8″ to 11-3/4″1124.0
97-44-2800-33940985-8Hanger Bolt Nut10.5023134-567030707-1H.D. Lug Jaw, 8” to 11-1/4” (Optional)166.0
997-87-2828-33939168-133Hanger Adjustment Screw10.8024134-564030067Lug Jaw, 11-3/4″ to 14-3/8″166.0
97-46-2800-33939248-8Hanger Jam Nut20.3025134-565030069Lug Jaw, 16″ to 17″177.0
10134-110025860Threaded Hinge Pin46.0026134-5515*30068-3Hinge Jaw, 11-3/4″ to 17″153.0
1110-120024528Hinge Pin Nut41.00*Required for Sizes Greater than 11-3/4” |
DB Manual Tong
The B Tong covers drill pipe or casing sizes from 3-1/2″ to 13-3/8″ OD. The B Tong can also be ordered with a 36″ Lever. This
Tong is made from alloy steel, heat treated and magnetic particle inspected. All steel specifications are certified. The B Tong
is rated for 55,000 FT/LBS. Torque.
CAT. #    OEM #    DESCRIPTION    QTY REQ    WT/LBS
132-100030114 Tong Complete with Long Lever (Less Lug Jaws)1460.0
Item #Cat #Ref #DescriptionQtyWt/LbsItem #Cat #Ref #DescriptionQtyWt/Lbs
1132-210012434-2Lever Assembly, 48″1130.013132-110511141Hinge Pin, Threaded45.0
1132-21109568-1Lever Assembly, 36″1120.014132-111011142Hinge Pin Nut40.5
1132-210512434Lever, 48″1124.01597-90-1032939667-77Hinge Pin Retainer Pin50.2
1132-21159568Lever, 361114.016132-991011228Booster Plunger Assembly11.0
2132-98009574Tong Line Pin16.017132-990011139Adjustable Stop Assembly11.0
10-993525468Tong Line Pin Ret/ (BJ & Woolley)11.0181 0-95009561Latch Spring20.1
3132-970067270Tong Line Pin Nut & Bolt11.01952-017116402-2Tong Die, 1/2″ x 1-1/4″ x 5-7/8″55.0
4132-99309572Lever Pin Block13.52010-180017194Die Retainer Pin100.1
10-680026782Hanger Assembly145.0132-561511195-2Latch Jaw Assembly137.0
510-681026783Hanger138.02210-202511138-1Latch Assembly131.0
610-970012586Hanger Balancing Screw13.023132-202011138Latch127.0
710-990012863Suspension Ring11.024132-560011765-1Lug Jaw, 3-1/2″ to 5″130.0
810-9760939055-576Hanger Balancing Screw Bolt10.525132-562511196-3Lug Jaw, 4-1/4″ to 6-3/4″143.0
10-9725939484-8Hanger Balancing Screw Nut10.526132-560611196-2Lug Jaw, 6-5/8″ to 9″161.0
997-35-2824-33939107-551Hanger Bolt11.027132-560811297-1Lug Jaw, 9″ to 10-3/4″167.0
97-44-2800-33940985-8Hanger Bolt Nut10.328132-561011285-1Lug Jaw, 11-3/4”168.0
1097-87-2828-33939168-133Hanger Adjustment Screw10.529132-562424592-1Lug Jaw, 13-3/8″177.0
97-46-2800-33939248-8Hanger Jam Nut20.332132-551011197-1Short Jaw Assembly149.0
31132-550011194-1Long Jaw Ass’y (Items 12 to 29)1108.03310-9940N/AClevis Assembly (BVM-Optional)12.0
12132-110011140Hinge Pin, Removable15.010-991524747Tong Pull Back (Optional)12.0
C Manual Tong
The C Tong covers drill pipe or casing sizes from 2-3/8″ to 10-3/4″ OD. The C Tong can also be ordered with a 30-7/8” Lever.
This Tong is made from alloy steel, heat treated and magnetic particle inspected. All steel specifications are certified. The C
Tong is rated for 35,000 FT/LBS. Torque.
CAT. #    OEM #    DESCRIPTION    QTY REQ    WT/LBS
133-1000    30117    Tong Complete with Long Lever (Less Lug Jaws)    1    276.0
Item #Cat #Ref #DescriptionQtyWtLbsItem # Cat #Ref #DescriptionQtyWt/Lbs
1133-210511516-2Lever Assembly, 40-1/2″1130.013133-111511522Hinge Pin Nut40.5
133-210011516Long Lever, 40-1/2″1120.01510-95009561Latch Spring20.1
133-211011883Short Lever, 30-1/2″1120.01652-017016401-2Tong Die, 1/2″ x 1-1/4″ x 5″5.75
2133-190511517-1Tong Line Pin14.01710-180017194Die Retainer Pin100.1
3133-9700939061-98Tong Line Bolt11.019133-562011941-1Latch Jaw Ass’y, 7″ to 8-5/8″ (#21 & #28)161.0
4133-990011523Lever Pin Block12.020133-562613799-1Latch Jaw Ass’y, 9-5/8″ to 10-3/4″176.0
133-680013264-1Hanger Assembly144.021133-563011942-1Hinge Jaw Only, 7″ to 8-5/8″129.0
510-680513264Hanger138.022133-564013798-1Hinge Jaw Only, 9-5/8″ to 10-3/4″137.0
610-970012586Hanger Balancing Screw13.023133-560030728-1Lug Jaw, 2-3/8″ to 3.668″133.0
710-990012863Suspension Ring11.024133-560530727-1Lug Jaw, 2-7/8″ to 4-1/4″134.0
8133-970530321Hanger Balancing Screw Ass’y12.325133-561011939-4Lug Jaw, 3-1/2″ to 5-1/4″131.0
10-9760939055-576Hanger Balancing Screw12.026133-564511943-1Lug Jaw, 4-1/2″ to 6-1/2″138.0
10-9725939484-8Hanger Balancing Screw Nut10.327133-561511940-2Lug Jaw, 5-1/4″ to 7″151.0
9133-971030329Hanger Bolt Assembly11.528133-562511941-2Latch Lug Jaw, 7″ to 8-5/8″128.0
97-35-2856-33939107-515Hanger Bolt11.329133-563513799Latch Lug Jaw, 9-5/8″ to 10-3/4″139.0
97-44-2800-33940985-8Hanger Bolt Nut10.230133-550011511-1Long Jaw Ass’y (w/ #16 & #17)165.0
1097-87-2828-33939168-133Hanger Adjustment Screw10.531133-565011513-1Short Jaw Ass’y (w/ #16 & #17)130.0
97-46-2800-33939248-8Hanger Jam Nut20.332133-200511933-2Latch129.0
11133-110011520-1Hinge Pin, Removable15.03310-9940N/AClevis Assembly (BVM-Optional)12.0
12133-110511521-1Hinge Pin, Threaded45.010-991524747Tong Pull Back (Optional)12.0
Web Wilson Manual Tong
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
AAX Tong Replacement Parts
40-95104510Tong Spring0.251A/R
40-11004611Hinge Pin4.504A/R
52-01714731Tong Dies, 1/2” x 1-1/4” x 5-7/8”1.004A/R
AAX Casing Tong Replacement Parts
40-95104510Tong Spring0.251A/R
40-11004611Hinge Pin4.504A/R
52-01714731Tong Dies, 1/2” x 1-1/4” x 5-7/8”1.00312
H Tong Replacement Parts
145-95004705Tong Spring0.252A/R
145-11004706Hinge Pin5.504A/R
52-01714731Tong Dies, 1/2” x 1-1/4” x 5-7/8”1.00412
B Tong Replacement Parts
40-95104510Tong Spring0.252A/R
146-11004411Hinge Pin3.254A/R
52-01674521Tong Dies, 3/8” x 1” x 5-3/4”0.50312
C Tong Replacement Parts
40-95004210Tong Spring0.122A/R
147-11004211Hinge Pin2.004A/R
52-01654321Tong Dies, 3/8” x 1” x 4-1/4”0.38312
D Tong Replacement Parts
40-95004210Tong Spring0.122A/R
148-1100409Hinge Pin1.004A/R
52-01654321Tong Dies, 3/8” x 1” x 4-1/4”0.38212
“A” Series Center Latch Elevators
TA-35, TA-65, TA-100, TA-150
Purpose: Center Latch Collar Elevators pro-
vides superior handling of collar-type drill pipe, cas-
ing and tubing.
Special features: Proper balance for easier han-
dling: latch and safety latch lock combination; operator
safety features.
Safety features include guarded operating
handles to help prevent accidents to operators and
an extra handle at the rear of the elevator for easier,
safer operation. All Type A elevators are equipped with
a latch and safety latch lock combination.
All Elevators are made from alloy steel, heat
treated and magnetic particle inspected. All steel
specifications are certified.
Elevator Assemblies
Cat. #Ref. #DescriptionWt. Ea.
TA-35 Elevator
180-100032387-*TA-35 Center Latch Elevator, 3/4” (1.050″) to 2-7/839-0
TA-65 Elevator
181-100032385-*TA-65 Center Latch Elevator, 1-1/4” (1.660″) to 2-7/8″65-0
181-200032386-*TA-65 Center Latch Elevator, 3-1/2″ to 4-1/2″65-0
TA-100 Elevator
182-100032383-*TA-100 Center Latch Elevator, 2-3/8″ to 2-7/8″100-0
182-200032384-*TA-100 Center Latch Elevator, 3-1/2″ to 4-1/2″158-0
184-100029960-*SLA-100 Ton Center Latch Elevator, 5-1/2″ to 8-5/8″350-0
TA-150 Elevator
183-100032754-*TA-150 Center Latch Elevator, 5-1/2″ to 8-5/8″430-0
“A” Series Center Latch Elevators Replacement Parts
No.Req.Part NameTA-35TA-65TA-100TA-150SLA-100
3/4”to 2-7/8”1-1/4”to 2-7/8”3-1/2”to 4-1/2”2-3/8”to 2-7/8”3-1/2”to 4-1/2”5-1/2”to 8-5/8”5-1/2”to 8-5/8”
Cat.#Cat.#Cat.#Cat.#Cat.#Cat.#Cat.#
OEM #OEM #OEM #OEM #OEM #OEM #OEM #
(Wt. Ea.)(Wt. Ea.)(Wt. Ea.)(Wt. Ea.)(Wt. Ea.)(Wt. Ea.)(Wt. Ea.)
1Latch Lock Assembly (Elev. Ass’y Only)180-220010-220010-220010-220010-2200183-220010-2008
32484 (8.7)32382 (8.7)32382 (8.7)32382 (8.7)32382 (8.7)32753 (21.8)30708 (12.9)
1Latch (Elev. Ass’y Only)180-200010-200010-200010-200010-2000183-230010-2009
32446 (5.5)32380 (5.5)32380 (5.5)32380 (5.5)32380 (5.5)32752-2 (15.0)30652 (10.0)
1Latch Lock (Elev. Ass’y Only)180-220110-220510-220510-220510-2205183-221010-2010
32447 (2.8)32381 (2.8)32381 (2.8)32381 (2.8)32381 (2.8)32757 (5.5)30653 (2.0)
1Latch Lock Pin180-790010-232010-232010-232010-2320183-232510-7903
36685362083620836208362083620729335
(.12)(.12)(.12)(.12)(.12)(.56)(.50)
1Latch Lock Spring180-950010-953010-953010-953010-9530183-952010-9503
32483324693246932469324693275829349
(.18)(.25)(.25)(.25)(.25)(.44)(.25)
1Hinge Pin180-1100181-110010-110010-1100182-1100183-1100184-1100
32917329163291532915329193292429963
(2.2)(2.2)(2.2)(2.2)(3.1)(16.0)(3.0)
1Latch Pin180-790510-790710-795010-7950182-2301183-790010-7975
32424-432424-332424-232424-232424-13276229334
(.62)(.62)(.62)(.62)(.62)(3.12)(.62)
1Latch Spring180-950510-951510-951510-951510-9515183-950010-9502
32482324703247032470324703276029338
(.18)(.18)(.18)(.18)(.18)(.44)(.19)
2Link Block10-271010-271510-271510-271510-271510-270510-2705
234043243032430324303243095199519
(1.0)(1.0)(1.0)(1.0)(1.0)(5.25)(5.25)
2Link Block Pin10-790010-794510-794510-794510-794510-792510-7925
234052935929359293592935981518151
(.25)(.25)(.25)(.25)(.25)(.56)(.56)
1Latch Lock Door Pin10-7915
30841
(.50)
1Latch Lock Retainer Pin10-7960
947128-172
(.12)
1Lockbar180-990010-991010-991010-9910182-0801183-9920
329183289232892328923292032925
(.12)(.12)(.12)(.12)(.12)(.12)
2Cotter Pin97-90-031697-90-031697-90-031697-90-031697-90-031697-90-031697-90-0316
939667-19939667-19939667-19939667-19939667-19939667-19939667-19
(.06)(.06)(.06)(.06)(.06)(.06)(.06)
2Link Block Bolt10-970310-973510-973510-973510-973510-977510-9775
23406939051-65939051-65939051-65939051-6581458145
(.13)(.25)(.25)(.25)(.25)(1.19)(1.19)
2Link Block Nut10-973010-973810-973810-973810-973810-978010-9780
939484-5939484-7939484-7939484-7939484-781508150
(.10)(.06)(.06)(.06)(.06)(.13)(.13)
2Grease Fitting97-85-040097-85-040097-85-040097-85-040097-85-040097-85-040097-85-0400
940308-1940308-1940308-1940308-1940308-1940308-1940308-1
(.06)(.06)(.06)(.06)(.06)(.06)(.06)
1Latch Pin Retainer183-1900184-1900
947128-22229341
(.50)(.50)
1Expansion Plug180-9910181-990010-990210-9902182-9900183-9900
944048-1944048-15944048-16944048-16944048-19944048-22
(.50)(.50)(.50)(.50)(.50)(.50)
“G” Series 18° Center Latch Elevators
Type MG / RG / MGG / GG
Purpose: Center Latch Collar Elevators for handling
18° external upset drill pipe and tubing. Similar in design
and construction to the A-Series, except they are bored to
fit the contour of 18° type drill pipe and tubing.
Special features: Proper balance for easier handling:
latch and safety latch lock combination; operator safety fea-
tures.
Safety features include guarded operating handles to
help prevent accidents to operators and an extra handle at
the rear of the elevator for easier, safer operation. All Type
A elevators are equipped with a latch and safety latch lock
combination.
All Elevators are made from alloy steel, heat treated
and magnetic particle inspected. All steel specifications are
certified.
Elevator Assemblies
Cat. #    Ref. #    Description    Wt. Ea.
MG Elevator – 100 Ton
188-1000    30157-*    MG 100 Ton Center Latch Elevator    238-0
2-3/8″, 2-7/8″, 3-1/2″, 4″, 4-1/2″ (Reg. & FH), 5″, 4-1/2″ (IF)
RG Elevator -150 Ton
189-1000    30156-*    RG 150 Ton Center Latch Elevator, 2-3/8” to 3-1/2″    308-0
MGG Elevator – 175 / 250 Ton
190-1000    13884-*    MGG 175 Ton Center Latch Elevator, 2-3/8″ to 2-7/8″    365-0
190-2000    35005-*    MGG 250 Ton Center Latch Elevator, 3-1/2″ to 4-1/2″    578-0
GG Elevator – 350 Ton
191-1000    31068-*    GG 350 Ton Center Latch Elevator, 4″ to 5-1/2″    715-0
*Order by Part Number followed by the bore code found in the bore code chart.
“G” Series Center Latch Elevators
Replacement Parts
No. Req.Part NameMGRGMGGGG
2-3/8”to 5”2-3/8”, 2-7/8”, 3-1/2”2-3/8”to 2-7/8”3-1/2”to 4-1/2”4”to 5-1/2”
Cat.#Cat.#Cat.#Cat.#Cat.#
OEM #OEM #OEM #OEM #OEM #
(Wt. Ea.)(Wt. Ea.)(Wt. Ea.)(Wt. Ea.)(Wt. Ea.)
1Latch (Elev. Ass’y Only)10-2003190-2090191-2000
11763 (9.25)23543 (33.0)13151 (40.0)34906 (57.0)31071 (50.0)
1Latch Lock (Elev. Ass’y Only)10-221010-225010-225010-2250
11764 (3.0)23729 (4.0)13152 (4.0)13152 (4.0)13152 (4.0)
1Latch Cam10-2007
11581
(.75)
2Link Block Assembly (Female)188-2700 26817-110-2700 9519-110-2700 9519-110-2700 9519-110-2700 9519-1
(4.75)(6.06)(7.0)(7.0)(7.0)
1Link Block188-275510-270510-270510-270510-2705
268179519951995199519
(3.8)(5.25)(5.25)(5.25)(5.25)
1Link Block Pin188-271010-792510-792510-792510-7925
80318151815181518151
(.31)(.56)(.56)(.56)(.56)
1Link Block Bolt Assembly10-971010-971010-971010-971010-9710
8145-28145-28145-28145-28145-2
(1.19)(1.19)(1.19)(1.19)(1.19)
1Hinge Pin188-1100190-1100190-1110203-1100
26813138883490831072
(4.56)(9.31)(15.8)(18.37)
1Hinge Pin Lockbar3491031074
(.50)
1Latch Spring10-9512189-950010-9545190-9550191-9500
1176623546131553490918416
(.31)(.87)(5.5)(2.37)(2.25)
1Latch Lock Spring10-952110-952110-952110-9521
13188131881318813188
(.25)(.25)(.25)(.25)
1Latch Lock Pin10-2305
11759
(.56)
1Latch Lock Bolt10-976510-976510-9765
151011510115101
(1.25)(1.25)(1.25)
1Latch Lock Nut10-972510-972510-9725
939484-8939484-8939484-8
(.18)(.18)(.18)
1Latch Pin188-2005190-2300190-2010
2681423544131543490731073
(2.56)(3.9)(6.0)(6.75)(10.38)
1Latch Pin Dowel131913491118608
(.12)(.25)(.12)
“G” Series Center Latch Elevators
Replacement Parts
No. Req.Part NameMGRGMGGGG
2-3/8”to 5”2-3/8”, 2-7/8”, 3-1/2”2-3/8”to 2-7/8”3-1/2”to 4-1/2”4”to 5-1/2”
Cat.# OEM # (Wt. Ea.)Cat.# OEM # (Wt. Ea.)Cat.# OEM # (Wt. Ea.)Cat.# OEM # (Wt. Ea.)Cat.# OEM # (Wt. Ea.)
10-794010-791210-791210-7912
1Door Lug Pin1252923547131901319013190
(.18)(.25)(.31)(.31)(.31)
10-794210-794210-7942
1Door Catch Arm Pin129161291612916
(.38)(.38)(.38)
10-950010-950010-9500
1Door Catch Spring956195619561
(.13)(.13)(.13)
10-250010-250010-2500
1Door Catch Arm138211382113821
Assembly(2.25)(2.25)(2.25)
97-90-0410
1Cotter Pin939667-18
(.06)
97-90-031697-90-031697-90-0316
1Cotter Pin939667-19939667-19939667-19
(.06)(.06)(.06)
97-85-040097-85-040097-85-0400
1Grease Fitting940308-1940308-1940308-1
(.06)(.06)(.06)
189-950210-790510-790510-7905
1Spring Stop23548131851318513185
(.87)(.94)(.94)(.94)
10-211310-211310-211310-2113
1Balancing Strap15320153201532015320
Assembly (Optional)(4.75)(4.75)(4.75)(4.75)
SLX Side Door Elevators
The Side Door Elevator is used for handling plain
or upset collar-type drill pipe, casing and tubing.
Sizes available from 4-1/2″ through 24-1/2″ OD, with
capacity of 100, 150, 250, 350 and 500 tons.
All Elevators are made from alloy steel, heat treat-
ed and magnetic particle inspected, all steel specifi-
cation are certified.
SLX Elevator Assemblies
Cat. #Ref. #DescriptionWt. Ea.
SLX – 100 Ton
198-300033854-*SLX-100 Ton Side Door Elevator, 4-1/2″ to 5-1/2″175-0
SLX – 150 Ton
199-100031239-*SLX-150 Ton Side Door Elevator, 6-5/8″ to 8-5/8″340-0
199-200033950-*SLX-150 Ton Side Door Elevator, 9-5/8″ to 10-3/4″420-0
199-300033982-*SLX-150 Ton Side Door Elevator, 11-3/4″ to 13-3/8″500-0
199-400034087-*SLX-150 Ton Side Door Elevator, 16″580-0
199-500033632-*SLX-150 Ton Side Door Elevator, 18-5/8″ to 20″700-0
SLX – 250 Ton
200-100043239-*SLX-250 Ton Side Door Elevator, 6-5/8” to 8-5/8”400-0
200-200043950-*SLX-250 Ton Side Door Elevator, 9-5/8” to 10-3/4”670-0
200-300043982-*SLX-250 Ton Side Door Elevator, 11-3/4” to 13-3/8”750-0
200-400043632-*SLX-250 Ton Side Door Elevator, 16” to 20”1000-0
200-500043175-*SLX-250 Ton Side Door Elevator, 24” to 30”1700-0
SX – 350 Ton
201-100022965-*SLX-350 Ton Side Door Elevator, 6-5/8″ to 13-3/8″1176-0
201-200029966-*SLX-350 Ton Side Door Elevator, 16” to 20”1200-0
SX – 500 Ton
202-100029964-*SLX-500 Ton Side Door Elevator, 9-5/8″ to 13-3/8″1180-0
202-200030729-*SLX-500 Ton Side Door Elevator, 16″ to 20”1250-0
Elevators Bore Code Charts
BORE CODE FOR DRILL PIPE
Drill Pipe DataTOOL JOINTBORE CODE
SIZETYPE UPSETSQUARE SHOULDER18° TAPERED SHOULDER
2-3/8″IUAPI REG109
EUWO OH SL-H90110116
2-7/8″IUAPI REG XH108117
EUNC31 (IF) WO OH SL-H90101118
3-1/2″IUAPI REG API FH102119
EUNC38 (IF) WO OH SL-H90103120
4″IUNC40 (FH) H90104121
EUNC50 (IF) WO OH105122
4-1/2″IU IEUNC45 (XH) WO OH105122
EUNC50 (IF) WO OH106123
5″IEUNC50 (XH) WO OH106123
5-1/2″IEUFH107124
BORE CODES FOR DRILL COLLARS
WITH ZIP LIFT RECESS
DRILL COLLAR O.D.BORE CODEDRILL COLLAR O.D.BORE CODE
4-1/8″1777-1/4″357
4-3/4″4357-1/2″188
5-1/4″1797-3/4″339
5-1/2″1808″336
5-3/4″1818-1/4″422
6″3628-1/2″426
6-1/4″3379″427
6-1/2″3739-1/2″370
6-3/4″38710″195
7″36111-1/4″196
BORE CODE FOR TUBING
TUBINGSTYLEBORETOPBOTTOM
SIZECODEBOREBORE
3/4″PLAIN1501-5/32″1-13/32″
(1.050″)UPSET1511-13/32″
1″PLAIN1521-13/32″1-19/32″
(1.315″)UPSET1531-19/32″
1-1/4″PLAIN1541-3/4″1-29/32″
(1.660″)UPSET1551-29/32″
1-1/2″PLAIN1562″2-3/16″
(1.900″)UPSET1572-3/16″
2-3/8″PLAIN1582-15/32″2-23/32′
UPSET1592-23/23″
2-7/8″PLAIN1602-31/32″3-7/32′
UPSET1613-7/32″
3-1/2″PLAIN1623-19/32″3-27/32″
UPSET1633-27/32″
4″PLAIN1644-3/32″4-11/32″
UPSET1654-11/32″
4-1/2″PLAIN1664-19/32″4-29/32″
UPSET1674-27/32″
A.P.I. CASING ELEVATOR
CASING SIZEBORE CODEELEVATOR BORE
4-1/2″1294-19/32″
4-3/4″1304-27/32″
5″1315-3/32″
5-1/2″1325-19/32″
5-3/4″1335-27/32″
6″1346-3/32″
6-5/8″1356-23/32″
7″1367-3/32″
7-5/8″1377-3/4″
8-5/8″1398-3/4″
9″1409-1/8″
9-5/8″1419-3/4″
10-3/4″14210-7/8″
11-3/4″14311-29/32″
13-3/8″14413-17/32″
16″14516-3/16″
18-5/8″14618-25/32″
20″14720-7/32″
21-1/2″14821-21/32″
24-1/2″14924-21/32″
LYT-20 Ton Slip Elevator
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Tool Assemblies
160-100028750LYT Elevator Complete (Less Slips)60.01A/R
160-140028745-1LYT Slip Body (Matched Set of 4)12.01A/R
Replacement Slip Assemblies
160-161028745-7Slip Assembly, 3/4” (1.050″)20.41A/R
160-162028745-2Slip Assembly, 1” (1.315″)20.41A/R
160-163028745-3Slip Assembly, 1-1/4” (1.660″)20.41A/R
160-164028745-4Slip Assembly, 1-1/2” (1.900″)17.81A/R
160-165028745-5Slip Assembly, 2” (2.000″)17.81A/R
160-166028745-6Slip Assembly, 2-1/16′ (2.062″)17.81A/R
Replacement Setting Plates
160-150528735Setting Plate, 3/4″ (1.050″)4.01A/R
160-151028736Setting Plate, 1″ (1.315″)3.01A/R
160-151528784Setting Plate, 1-1/4″ (1.660″)3.01A/R
160-152528783Setting Plate, 1-1/2″ (1.900″)3.01A/R
160-153028737Setting Plate, 2″ (2.000″)2.21A/R
160-153528782Setting Plate, 2-1/16″ (2.062″)2.21A/R
Replacement Inserts
160-060129370Reducing Insert, 2-1/16” x 3/4” (1.050″)0.888
160-060228749Reducing Insert, 2-1/16” x 1” (1.315”)0.888
160-060328778Reducing Insert, 2-1/16” x 1-1/4” (1.660″)0.788
160-060428775Reducing Insert, 2-1/16” x 1-1/2” (1.900”)0.488
160-060628772Basic Insert, 2-1/16” x 2-1/16” (2.062″)0.488
Replacement Parts
Cat. #Ref. #DescriptionWt.QtyBxCat. #Ref. #DescriptionWt.QtyBx
160-180028786Insert Retainer Plate0.14A/R160-110028753Hinge Pin.081A/R
160-970028785Setting Plate Screw0.32A/R160-990028762-1Link Block Assembly1.72A/R
160-970528787Insert Retainer Plate Screw0.22A/R160-990528762Link Block1.01A/R
160-200530711Latch and Latch Lock Ass’y8.11A/R10-794328763Link Block Pin0.62A/R
97-61-2000939369-13Setting Ring Screw Washer0.12A/R160-991028764-1Link Block Bolt Ass’y0.31A/R
160-201030644Latch5.81A/R160-190528760Slip Retaining Pin0.44A/R
160-791028757Latch Pin0.21A/R160-951028761Slip Spring0.24A/R
160-950532486Latch Spring.061A/R160-7925941067-102Latch Lock Door Pin.011A/R
160-201530645Latch Lock2.71A/R160-1915947132-222Latch Pin Retaining Pin0.11A/R
160-950028769Latch Lock Spring0.41A/R97-90-0508939667-25Cotter Pin0.11A/R
160-790028767Latch Lock Pin0.21A/R97-85-0400940308-1Grease Fitting, 1/8″0.21A/R
10-7960947128-72Latch Lock Pin Retainer Pin.021A/R
MYT-40 Ton Slip Elevator
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Tool Assemblies
161-100029328MYT Elevator Complete (Less Slips)1481A/R
161-143529343-10Slip Body, 2-7/8” (Matched Set of 4)31.01A/R
Replacement Slip Assemblies
161-161029343-7Slip Assembly, 1” (1.315”)50.01A/R
161-162029343-6Slip Assembly, 1-1/4” (1.660″ )49.51A/R
161-163029343-5Slip Assembly, 1-1/2” (1.990″ )49.01A/R
161-164029343-4Slip Assembly, 2” (2.000”)47.81A/R
161-165029343-3Slip Assembly, 2-1/16”47.41A/R
161-166029343-2Slip Assembly, 2-3/8″46.01A/R
161-167029343-1Slip Assembly, 2-7/8″441A/R
Replacement Setting Plates
161-150729354Setting Plate, 1″ (1.315″)8.01A/R
161-150529353Setting Plate, 1-1/4″ (1.660″)7.51A/R
161-151029352Setting Plate, 1-1/2″ (1.900″)7.01A/R
161-151529351Setting Plate, 2″ (2.00″)7.01A/R
161-152029350Setting Plate, 2-1/16″7.01A/R
161-152529345Setting Plate, 2-3/8″6.51A/R
161-153029348Setting Plate, 2-7/8″6.51A/R
Replacement Inserts
10-0801N/AReducing Insert, 2-7/8″ x 3/4″ (1.050″)1.188
10-080229259Reducing Insert, 2-7/8″ x 1″ (1.315″)1.388
10-080329258Reducing Insert, 2-7/8″ x 1-1/4″ (1.660″)1.388
10-080429257Reducing Insert, 2-7/8″ x 1-1/2″ (1.900″)1.288
10-080629256Reducing Insert, 2-7/8″ x 2-1/16″ (2.062″)1.188
10-0807DM29255DMReducing Insert, 2-7/8″ x 2-3/8″ (Directional)1.088
10-0808DM24773DMBasic Insert, 2-7/8″ x 2-7/8″ (Directional)0.188
Replacement Parts
Cat. #Ref. #DescriptionWt.QtyBxCat. #Ref. #DescriptionWt.QtyBx
10-200830708Latch & Latch Lock Assembly12.11A/R161-991029337Link Block1.01A/R
10-200930652Latch12.11A/R10-794529359Link Block Pin0.21A/R
10-201030653Latch Lock2.01A/R161-971029358-1Link Block Bolt Assembly0.41A/R
10-790329335Latch Lock Pin0.51A/R161-970029336Slip Bolt0.74A/R
10-950329349Latch Lock Spring0.21A/R161-950029340Slip Spring0.44A/R
10-7960947128-172Latch Lock Pin Retainer Pin0.01A/R97-85-0400940308-1Grease Fitting, 1/8″0.21A/R
10-797529334Latch Pin4.01A/R161-180029344Insert Retainer Plate0.54A/R
10-950229338Latch Spring0.51A/R161-970529347Setting Plate Bolt0.42A/R
10-791530841Latch Lock Door Pin0.21A/R161-971529360Insert Retainer Plate Screw0.22A/R
161-110029333Hinge Pin4.01A/R97-61-2000939369-13Setting Ring Screw Washer0.12A/R
161-990029337-1Link Block Assembly4.02A/R
YT-75 Ton Slip Elevator
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Tool Assemblies
162-100023105YT Elevator Complete (Less Slips)355.01A/R
162-140023108-2Slip Segment, 2-7/8″ (Matched Set of 4)59.01A/R
162-1410S23108-SSlip Segment, 3-1/2″ (Matched Set of 4)51.01A/R
Replacement Slip Assemblies
162-160023108-11Slip Assembly, 2-7/8″ x 1” (1.315″)85.81A/R
162-161023108-10Slip Assembly, 2-7/8″ x 1-1/4” (1.660″)85.81A/R
162-162023108-9Slip Assembly, 2-7/8″ x 1-1/2” (1.900″)83.61A/R
162-163023108-8Slip Assembly, 2-7/8″ x 2″81.01A/R
162-164023108-7Slip Assembly, 2-7/8″ x 2-1/16″81.01A/R
162-165023108-6Slip Assembly, 2-7/8″ x 2-3/8″79.01A/R
162-166023108-4Slip Assembly, 2-7/8″ x 2-7/8″69.01A/R
162-167023108-3Slip Assembly, 3-1/2″ x 2-7/8″65.01A/R
162-168023108-5Slip Assembly, 3-1/2″ x 3-1/2″62.01A/R
Replacement Setting Plates
162-150029001Setting Plate, 1″4.801A/R
162-150527810Setting Plate, 1-1/4″4.501A/R
162-151027811Setting Plate, 1-1/2″4.251A/R
162-151528821Setting Plate, 2″4.251A/R
162-152027812Setting Plate, 2-1/16″4.251A/R
162-152527694Setting Plate, 2-3/8″4.251A/R
162-153027695Setting Plate, 2-7/8″4.251A/R
162-153527813Setting Plate, 3-1/2″4.251A/R
Replacement Inserts
10-0801N/AReducing Insert, 2-7/8′x 3/4″ (1.050″)1.101212
10-080229259Reducing Insert, 2-7/8″x 1″ (1.315″)1.301212
10-080329258Reducing Insert, 2-7/8″x 1-1/4″ (1.660″)1.301212
10-080429257Reducing Insert, 2-7/8″x 1-1/2″ (1.900″)1.201212
10-080629256Reducing Insert, 2-7/8″x 2-1/16″ (2.062″)1.101212
10-0807DM29255DMReducing Insert, 2-7/8″x 2-3/8″ (Directional)1.001212
10-0808DM24773DMBasic Insert, 2-7/8″ x 2-7/8 (Directional)0.701212
10-130830358Reducing Insert, 3-1/2″x 2-7/8″1.002424
10-1313DM24774DMBasic Insert, 3-1/2″ x 3-1/2″ (Directional)0.502424
Replacement Parts
Cat. #Ref. #DescriptionWt.Qty BxCat. #Ref. #DescriptionWt.QtyBx
162-940024508Insert Spacer, 1” to 2-7/8″ 0.254 A/R10-794012529Door Lug Pin0.401A/R
162-940624507Insert Spacer, 3-1/2″ 0.258 A/R10-27009519-1Link Block Assembly (fem.)6.102A/R
10-201515348Latch27.01 A/R10-27059519Link Block5.801A/R
10-796524182Latch Pin4.201 A/R10-79258151Link Block Pin0.801A/R
162-201012972Latch Lock3.801 A/R10-97108145-2Link Block Bolt Assembly0.101A/R
10-793013530Latch Lock Pin0.121 A/R162-971027532Insert Retainer Screw0.102A/R
10-200512946Latch Cam1.801 A/R162-971527697Setting Ring Retaining Screw0.304A/R
10-950512978Latch Spring0.801 A/R162-941027696Rubber Bushing0.064A/R
162-090023630-1Guide Plate3.001 A/R162-180027451Insert Retainer, 1” to 2-7/8”0.204A/R
162-970527533Guide Plate Screw0.252 A/R162-180527530Insert Retainer, 3-1/2”0.124A/R
162-950023113Slip Spring0.254 A/R162-181027507Setting Ring Retainer, 1′ to 2-7/8″0.202A/R
162-970023115Slip Retainer Bolt1.204 A/R162-181527546Setting Ring Retainer, 3-1/2”0.202A/R
162-110023116Hinge Pin4.201 A/R
YC -75 Ton Slip Elevator
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Tool Assemblies
163-100024140Type YC Elevator (Less Slips & Guide Plates)455.01A/R
Replacement Slips
163-140024072-4Slip Segment, 4-1/2″ (Matched Set of 4)23.01A/R
193-141024072Slip Segment, 5-1/2″ (Matched Set of 4)23.01A/R
163-142024077Slip Segment, 7” (Matched Set of 4)19.01A/R
Replacement Slip Assemblies
163-160034931Slip Assembly Complete, 4-1/2” x 3-1/2″130.01A/R
163-161026830Slip Assembly Complete, 4-1/2” x 4″120.01A/R
163-162024072-5Slip Assembly Complete, 4-1/2″ x 4-1/2”116.01A/R
163-163024072-7Slip Assembly Complete, 5-1/2” x 5″112.01A/R
163-164024072-2Slip Assembly Complete, 5-1/2″ x 5-1/2”108.01A/R
163-165024077-7Slip Assembly Complete, 7” x 6-5/8″108.01A/R
163-166024077-1Slip Assembly Complete, 7″ x 7”105.01A/R
Replacement Setting Plates
163-150034932Setting Plate, 3-1/2″8.01A/R
163-150530209Setting Plate, 4″5.01A/R
163-151030219Setting Plate, 4-1/2″7.01A/R
163-151530220Setting Plate, 5″6.21A/R
163-152030223Setting Plate, 5-1/2″6.01A/R
163-153030226Setting Plate, 6-5/8″6.01A/R
163-153530229Setting Plate, 7″5.21A/R
Replacement Guide Plates
163-090026827-1Bottom Guide Plates, 3-1/2”7.52A/R
163-092026827Bottom Guide Plates, 4”8.52A/R
163-093024071-4Bottom Guide Plates, 4-1/2”8.52A/R
163-094024071Bottom Guide Plates, 5”8.02A/R
163-095024071-1Bottom Guide Plates, 5-1/2”5.82A/R
163-096024071-3Bottom Guide Plates, 6-5/8”5.32A/R
163-097024071-2Bottom Guide Plates, 7”3.82A/R
Replacement Insert Retainers
163-180030214Insert Retainer, 3-1/2″, 4″ , 4-1/2″2.74A/R
163-181030221Insert Retainer, 5”2.24A/R
163-182030224Insert Retainer, 5-1/2″2.24A/R
163-183030227Insert Retainer, 6-5/8”2.24A/R
163-184030230Insert Retainer, 7″2.74A/R
YC-75 Ton Slip Elevator
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Inserts
10-2477924779Reducing Insert, 4-1/2″ x 3-1/2″1.11616
10-2478124781Reducing Insert, 4-1/2″ x 4″0.91616
10-1640816408Basic Insert, 4-1/2″ x 4-1/2″0.51616
10-2478524785Reducing Insert, 5-1/2″ x 4-1/2″1.11616
10-2478324783Reducing Insert, 5-1/2″ x 5″0.91616
10-1640716407Basic Insert, 5-1/2″ x 5-1/2″0.51616
10-2474824748Reducing Insert, 7″ x 6-5/8″.752424
10-1640716407Basic Insert, 7″ x 7″0.52424
Slip Assembly Replacement Parts
163-940524506Insert Spacer.258A/R
163-971030211Shoulder Screw0.34A/R
163-940030213Rubber Bushing0.24A/R
163-170030216Setting Ring Retainer0.22A/R
163-9705941271-73Insert Retaining Screw.154A/R
Setting Plate Assembly Replacement Parts
163-990025423Plug.102A/R
163-990525424Key.011A/R
97-90-0406939667-16Cotter Pin.022A/R
Replacement Parts
10-201515348Latch271A/R
162-201012972Latch Lock3.01A/R
10-200512946Latch Cam1.31A/R
10-950512978Latch Spring.101A/R
10-796524182Latch Pin5.01A/R
10-793013530Latch Lock Pin0.61A/R
10-794012529Door Lug Pin0.31A/R
163-110024181Hinge Pin8.51A/R
163-950524049Slip Spring0.44A/R
163-971524075Guide Plate Screw0.34A/R
10-9730939484-5Guide Plate Nut.014A/R
163-970024076Slip Bolt1.14A/R
10-27009519-1Link Block Assembly (Female)6.32A/R
10-2705951 9Link Block5.31A/R
10-79258151Link Block Pin0.31A/R
10-97108145-2Link Block Bolt Assembly0.81A/R
Baash Ross UC-3 & UC-4 Casing Slips
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Tool Assemblies
210-10257704-111UC-3 Casing Slip, 8-5/8” (Less Inserts & Retaining Pins)10411
210-10387704-5033UC-3 Casing Slip, 8-5/8” (with 7” Inserts & Retaining Pins)13011
210-10457704-5031UC-3 Casing Slip, 8-5/8” (with 8-5/8”” Inserts & Retaining Pins)12011
Replacement Parts
210-1200-037704-A-17SFSet, Safety Flex Handles (3 pcs)12.61A/R
210-12107704-A-17Handle5.83A/R
210-13067704-A-16Handle Pin0.23A/R
210-11007704-B-16Hinge Pin0.39A/R
210-18007704-A-29Liner Retainer Pin0.2A/RA/R
Replacement Inserts
210-45387704-A-112Insert, 8-5/8″ x 7″4.51010
210-45407704-A-113Insert, 8-5/8″ x 7-5/8″4.01010
210-45457704-A-22Insert, 8-5/8″ x 8-5/8″2.01010
210-56487704-A-125Insert, 10-3/4″ x 9″6.51010
210-56507704-A-9Insert, 10-3/4″ x 9-5/8″5.01010
210-56567704-A-8Insert, 10-3/4” x 10-3/4″3.01010
210-69617704-A-39Insert, 13-3/8″ x 11-3/4″6.21212
210-69667704-A-92Insert, 13-3/8″ x 12 3/4″5.71212
210-69697704-A-38Insert, 13-3/8″ x 13-3/8″3.51212
210-75757704-A-45Insert, 16″ x 16″3.51414
210-77777704-A-99Insert, 20″ x 20″3.51414
210-85857704-A-100Insert, 26″ x 26″4.22121
210-85857704-A-100Insert, 30″ x 30″4.22424
210-85857704-A-100Insert, 33″ x 33″4.22626
210-85857704-A-100Insert, 36″ x 36″4.22828
210-85857704-A-100Insert, 42″ x 42″4.23232
Varco CMS-XL Casing Slips
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Tool Assemblies
212-10355315Casing Slip Complete (with Inserts), 6-5/8”196.01A/R
212-10385301Casing Slip Complete (with Inserts), 7”184.01A/R
212-10405303Casing Slip Complete (with Inserts), 7-5/8”166.01A/R
212-10455305Casing Slip Complete (with Inserts), 8-5/8″181.01A/R
212-10505307Casing Slip Complete (with Inserts), 9-5/8″192.01A/R
212-10565309Casing Slip Complete (with Inserts), 10-3/4″209.01A/R
212-10615311Casing Slip Complete (with Inserts), 11-3/4″260.01A/R
212-10695313Casing Slip Complete (with Inserts), 13-3/8″247.01A/R
212-10755325Casing Slip Complete (with Inserts), 16″308.01A/R
212-10765333Casing Slip Complete (with Inserts), 18-5/8″367.01A/R
212-10775329Casing Slip Complete (with Inserts), 20″383.01A/R
212-10785331Casing Slip Complete (with Inserts), 24″443.01A/R
212-10855346Casing Slip Complete (with Inserts), 26″486.01A/R
212-10905342Casing Slip Complete (with Inserts), 30″546.01A/R
Replacement Parts
36-53205320Segment Right End12.01A/R
36-53225322Segment Intermediate12.0A/RA/R
36-53215321Segment Left End12.01A/R
36-25252525Hinge Pin with Cotter Pin0.7A/RA/R
36-37653765Front Handle3.52A/R
36-37663766Center/Rear Handle4.01A/R
36-1200-03NASet, Safety Flex Handles (3 pcs)12.01A/R
36-37693769Handle Pin with Cotter & Washer0.5A/RA/R
Replacement Button Inserts
36-26282628Button Insert for Casing Slip, 6-5/8″0.2144144
36-26192619Button Insert for Casing Slip, 7″0.3144144
36-26302630Button Insert for Casing Slip, 7-5/8″0.1144144
36-26302630Button Insert for Casing Slip, 8-5/8″0.1156156
36-26302630Button Insert for Casing Slip, 9-5/8″0.1168168
36-26302630Button Insert for Casing Slip, 10-3/4″0.1180180
36-26272627Button Insert for Casing Slip, 11-3/4″0.2204204
36-26302630Button Insert for Casing Slip, 13-3/8″0.1216216
36-26312631Button Insert for Casing Slip, 16″0.4252252
36-26262626Button Insert for Casing Slip, 18-5/8″0.1300300
36-26312631Button Insert for Casing Slip, 20″0.4312312
36-26312631Button Insert for Casing Slip, 24″0.4360360
36-26312631Button Insert for Casing Slip, 26″0.4396396
36-26312631Button Insert for Casing Slip, 30″0.4444444
Baash Ross C-1 Drill Collar Slips
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Tool Assemblies
218-10007638-5104Drill Collar Slip Complete (with Liner Inserts), 3″ to 4-1/2″112.01A/R
218-10107638-5105Drill Collar Slip Complete (with Liner Inserts), 4-1/4″ to 5-3/4″123.01A/R
218-10207638-5106Drill Collar Slip Complete (with Liner Inserts), 5-1/2″ to 7″134.01A/R
218-10307638-5107Drill Collar Slip Complete (with Liner Inserts), 6-3/4″ to 8-1/4″119.01A/R
218-10407638-5108Drill Collar Slip Complete (with Liner Inserts), 8-1/2” to 10”99.01A/R
218-10507638-5109Drill Collar Slip Complete (with Liner Inserts), 10″ to 11-1/4″158.01A/R
218-10607638-5110Drill Collar Slip Complete (with Liner Inserts), 11-1/4″ to 12-3/4″210.01A/R
Body Segments
218-14047638-5099-11Right Hand Body Segment, 3″ to 4-1/2″10.81A/R
218-14107638-5100-11Right Hand Body Segment, 4-1/4″ to 5-3/4″9.31A/R
218-14167638-5101-11Right Hand Body Segment, 5-1/2″ to 7″8.31A/R
218-14227638-5102-11Right Hand Body Segment, 6-3/4″ to 8-1/4″7.01A/R
218-14287638-5103-11Right Hand Body Segment, 8-1/2″ to 10”5.81A/R
218-14227638-5102-11Right Hand Body Segment, 10” to 11-1/4”7.01A/R
218-14167638-5101-11Right Hand Body Segment, 11-1/4” to 12-3/4”8.31A/R
218-14027638-5099-10Intermediate Body Segment, 3″ to 4-1/2″10.866
218-14087638-5100-10Intermediate Body Segment, 4-1/4″ to 5-3/4″9.388
218-14147638-5101-10Intermediate Body Segment, 5-1/2″ to 7″8.31010
218-14207638-5102-10Intermediate Body Segment, 6-3/4″ to 8-1/4″7.01010
218-14267638-5103-10Intermediate Body Segment, 8-1/2″ to 10”5.81010
218-14207638-5102-10Intermediate Body Segment, 10” to 11-1/4”7.01515
218-14147638-5101-10Intermediate Body Segment, 11-1/4” to 12-3/4”8.31717
218-14007638-5099-12Left Hand Body Segment, 3″ to 4-1/2″10.81A/R
218-14067638-5100-12Left Hand Body Segment, 4-1/4″ to 5-3/4″9.31A/R
218-14127638-5101-12Left Hand Body Segment, 5-1/2″ to 7″8.31A/R
218-14187638-5102-12Left Hand Body Segment, 6-3/4″ to 8-1/4″7.01A/R
218-14247638-5103-12Left Hand Body Segment, 8-1/2″ to 10”5.81A/R
218-14187638-5102-12Left Hand Body Segment, 10” to 11-1/4”7.01A/R
218-14127638-5101-12Left Hand Body Segment, 11-1/4” to 12-3/4”8.31A/R
Replacement Parts
12-11077638-B-59Hinge Pin1.1A/RA/R
12-12107638-A-78Slip Handle2.53A/R
12-13107638-E-2Handle Pin0.13A/R
12-1215-03NASet, Safety Flex Handles (3 pcs)10.01A/R
218-18007638-5113Liner Keeper with Bolt & Washer0.3A/RA/R
Replacement Inserts
217-09217638-A-86Renewable Liner Insert, 3″ to 4-1/2″0.71212
217-19317638-B-81Renewable Liner Insert, 3-3/4″ to 5-1/4″1.01212
217-15277838-A-81Renewable Liner Insert, 4-1/4″ to 5-3/4″0.81212
12-29387638-A-116Renewable Liner Insert1.0A/RA/R
Varco Drill Collar Slips
Cat. #Ref. #DescriptionWt. Ea.Qty.Cat. #Ref. #DescriptionWt. Ea.Qty.
Replacement Assemblies
219-10252572DCS-S, 3″ to 4″1121221-10202507DCS-L, 8″ to 9-1/2″1731
219-10502573DCS-S, 4″ to 4-7/8″1031221-10302530DCS-L, 8-1/2″ to 10″1851
220-10252552DCS-R, 4-1/2″ to 6”1201221-10402508DCS-L, 9-1/4″ to 11-1/4″1981
220-10502550DCS-R, 5-1/2″ to 7″1121221-10502534DCS-L, 11″ to 12-3/4″2131
221-10002501DCS-L, 5-1/2” to 7”1631221-10602536DCS-L, 12″ to 14″2071
221-10102503DCS-L, 6-3/4″ to 8-1/4″1541
Replacement Parts
36-25682568Segment-Right End, DCS-S11.0136-25112511Segment-Left End, DCS-L12.01
36-25702570Segment-Intermediate, DCS-S11.0A/R36-25252525Hinge Pin with Cotter Pin0.706
36-25692569Segment-Left End, DCS-S11.0136-37653765Front Handle3.502
36-25542554Segment-Right End, DCS-R11.0136-37663766Center/Rear Handle4.001
36-25562556Segment-Intermediate, DCS-R11.0A/R36-37693769Handle Pin w/ Cotter & Washer0.503
36-25552555Segment-Left End, DCS-R11.0197-90-060871936Insert Cotter for DCS-S, DCS-R0.01A/R
36-25102510Segment-Right End, DCS-L12.0197-13353748Ret. Screw w/Washer for DCS-L0.20A/R
36-25122512Segment-Intermediate, DCS-L12.0A/R36-1200-03NASet, Safety Flex Handles (3 pcs)12.01
Button Inserts
36-26282628DCS-S Circular Button, 3” to 4”0.204936-26302630DCS-L Circular Button, 8” to 9-1/2”0.1096
36-26202620DCS-S Circular Button, 4” to 4-7/8”0.104936-26272627DCS-L Circular Button, 8-1/2” to 10”0.20104
36-26282628DCS-R Circular Button, 4-1/2” to 6”0.206336-26302630DCS-L Circular Button, 9-1/4” to 11-1/4”0.10112
36-26202620DCS-R Circular Button, 5-1/2” to 7”0.106336-26252625DCS-L Circular Button, 11” to 12-3/4”0.20136
36-25132513DCS-L Circular Button, 5-1/2” to 7”0.208836-26302630DCS-L Circular Button, 12” to 14”0.20136
36-26302630DCS-L Circular Button, 6-3/4” to 8-1/4”0.1088
Woolley A Drill Collar Slips Replacement Inserts & Parts
Drill Collar Size Range3” to 4-1/4”3-1/4” to 4-3/4”4-1/4” to 5-3/4”5-1/2” to 7”6-3/4” to 8-1/4”8-1/4” to 10”10” to 11-3/4”
Cat. #Ref. #DescriptionWt.Qty.Qty.Qty.Qty.Qty.Qty.Qty.
222-2938797-000-0000Renewable Insert0.2521242730333639
222-1100707-000-0100Hinge Pin0.506789101112
222-1200707-000-0200Handle2.003333333
222-1230-03707-000-0207Set, Safety Flex Handles9.001111111
222-1300707-000-0300Handle Pin0.253333333
117-005-0400Handle/Hinge Pin Cotter0.019101112131415
222-1800707-000-0600Insert Retainer Pin0.257891011
222-1805707-000-0700Insert Retainer Pin0.251215
117-005-0200Ret. Pin Cotter0.2578910111215
Baash Ross Type C Safety Clamps
Clamp with WrenchClamp & Box with WrenchDescription
Cat. #Ref. #Wt.Cat. #Ref. #Wt.
Type CR (Single Screw)
225-10077624-505550225-1007B7624-5007100Type C 7 Link CR, 3-3/4″ to 4-5/8″
225-10087624-505656225-1008B7624-5008106Type C 8 Link CR, 4-1/2″ to 5-5/8″
225-10097624-505761225-1009B7624-5009111Type C 9 Link CR, 5-1/2″ to 6-5/8″
225-10107624-505866225-1010B7624-5010116Type C 10 Link CR, 6-1/2″ to 7-5/8″
225-10117624-505972225-1011B7624-5011122Type C 11 Link CR, 7-1/2″ to 8-5/8″
225-10127624-506078225-1012B7624-5012128Type C 12 Link CR, 8-1/2″ to 9-5/8″
225-10137624-506184225-1013B7624-5013134Type C 13 Link CR, 9-1/2″ to 10-5/8″
Type CL (Single Screw)
225-10147624-506290225-1014B7624-5014150Type C 14 Link CL, 10-1/2″ to 11-5/8″
225-10157624-506396225-1015B7624-5015156Type C 15 Link CL, 11-1/2″ to 12-5/8″
225-10167624-5064102225-1016B7624-5016152Type C 16 Link CL, 12-1/2″ to 13-5/8″
225-10177624-5065108225-1017B7624-5017158Type C 17 Link CL, 13-1/2″ to 14-5/8″
225-1018-17624-5066114225-1018-1B 7624-5018164Type C 18 Link CL, 14-1/2″ to 15-5/8″
Type CXL (Double Screw)
225-1018-27624-5084120225-1018-2B 7624-5029170Type C 18 Link CXL, 15-1/2″ to 17″
225-10197624-5085126225-1019B7624-5030176Type C 19 Link CXL, 16-1/2″ to 18″
225-10207624-5086132225-1020B7624-5031182Type C 20 Link CXL, 17-1/2″ to 19″
225-10217624-5087138225-1021B7624-5032188Type C 21 Link CXL, 18-1/2″ to 20″
225-10227624-5089146225-1022B7624-5033196Type C 22 Link CXL, 19-1/2″ to 22″
Other Sizes Available on Request.
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Parts & Inserts
225-14107624-A-24Pivot End Link3.51A/R
12-99107624-A-5000Pivot Block1.51A/R
1 2-791 07624-D-5Pivot Pin0.52A/R
225-14157624-A-3Screw End Link4.51A/R
12-79157624-F-5Pin with Chain1.21A/R
12-97107624-A-5Screw for Screw End Link4.01A/R
12-97207624-B-5Nut for Screw End Link1.51A/R
12-99007624-A-25Wrench for Nut on Screw End Link4.01A/R
225-14007624-A-7Intermediate Link Assembly w/ Link Pin5.0A/RA/R
225-50007624-A-4Insert with Spring & Cotter0.7A/RA/R
225-951 07624-E-5Insert Spring0.1A/RA/R
97-90-0808900620-65Cotter Pin for Inserts0.1A/RA/R
12-79057624-C-5Link Pin0.7A/RA/R
97-90-0612900620-36Cotter Pin for Link Pins0..2A/RA/R
225-14057624-A-1Intermediate Link (Less Insert)3.7A/RA/R
225-12007624-5135Handle Kit4.0A/RA/R
36-33317624-A-97Storage Box, 6-1/2″ x 24″ x 17″50.01A/R
Baash Ross Type T Safety Clamps
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Safety Clamp Assemblies
226-10007624-5103Clamp Ass’y T’ 4 Link, 1-1/8″ to 2″351A/R
226-1000B7624-5044Clamp Ass’y T’ 4 Link, 1-1/8″ to 2″ with Box841A/R
226-10057624-5104Clamp Ass’y T’ 5 Link, 2-1/8″ to 3-1/4″401A/R
226-1005B7624-5045Clamp Ass’y T’ 5 Link, 2-1/8″ to 3-1/4″ with Box881A/R
226-10107624-5105Clamp Ass’y T’ 6 Link, 3-1/4″ to 4-1/2″441A/R
226-1010B7624-5046Clamp Ass’y T’ 6 Link, 3-1/4″ to 4-1/2″ with Box921A/R
Replacement Parts
226-14057624-A-19Pivot End Link3.51A/R
12-99107624-A-5000Pivot Block1.51A/R
1 2-791 07624-D-5Pivot Pin0.22A/R
226-14107624-A-20Screw End Link4.51A/R
12-79157624-F-5Pin with Chain1.21A/R
1 2-971 07624-A-5Screw4.01A/R
1 2-97207624-B-5Nut1.51A/R
1 2-99007624-A-25Wrench4.01A/R
226-14117624-B-7Intermediate Link Assembly4.2A/RA/R
226-50007624-A-21Insert with Spring & Cotter0.5A/RA/R
226-951 57624-B-21Insert Spring0.1A/RA/R
97-90-0808900620-65Cotter Pin for Inserts0.1A/RA/R
1 2-79057624-C-5Link Pin0.7A/RA/R
97-90-0612900620-36Cotter Pin for Link Pins0..2A/RA/R
226-14007624-A-18Intermediate Link (Less Insert)3.5A/RA/R
226-12057624-5138Handle Kit3.5A/RA/R
Varco MP Safety Clamps
Cat. #Ref. # Description# LksDiesWt.Cat. #Ref. # DescriptionLksDiesWt.
MP-S Safety ClampsMP-L Safety Clamps
227-100033030MP-S Clamp, 2-7/8” – 4-1/8”78125230-100033021MP-L Clamp, 15-7/8” – 17”1718215
227-101033031MP-S Clamp, 4” – 5”89133230-101033022MP-L Clamp, 17” – 18-1/2”1819223
MP-R Safety Clamps230-102033023MP-L Clamp, 18-1/8” – 19-3/8”1920231
228-100033011MP-R Clamp, 4-1/2” – 5-5/8”78123MP-XL Safety Clamps
228-101033012MP-R Clamp, 5-1/2” – 7”89131231-100033024MP-XL Clamp, 19-3/8” – 20-3/8”1920280
228-102033013MP-R Clamp, 6-3/4” – 8-1/4”910139231-101033025MP-XL Clamp, 20-3/8” – 21-1/2”2021288
228-103033014MP-R Clamp, 8” – 9-1/4”1011147231-102033032MP-XL Clamp, 21” – 22-5/8”2122296
228-104033015MP-R Clamp, 9-1/4” – 10-1/2”1112155231-103033033MP-XL Clamp, 22-5/8” – 23-3/4”2223304
MP-M Safety Clamps231-104033034MP-XL Clamp, 23-3/4” – 24-7/8”2324312
229-100033016MP-M Clamp, 10-1/2” – 11-1/2”1213163231-105033035MP-XL Clamp, 24-7/8” – 26”2425320
229-101033017MP-M Clamp, 11-1/2” – 12-1/2”1314171231-106033036MP-XL Clamp, 26” – 27-1/8”2526328
229-102033018MP-M Clamp, 12-1/2” – 13-5/8”1415179231-107033039MP-XL Clamp, 29-3/8” – 30-1/2”2829336
229-103033019MP-M Clamp, 13-5/8” – 14-3/4”1516187231-108033044MP-XL Clamp, 35” – 36-1/8”3334354
229-104033020MP-M Clamp, 14-3/4” – 15-7/8”1617195
MP Safety Clamp Parts
Item #DescriptionMP-SMP-RMP-MMP-LMP-XL
Cat. # Ref. ## Req. (Wt.)Cat. # Ref. ## Req. (Wt.)Cat. # Ref. ## Req. (Wt.)Cat. # Ref. ## Req. (Wt.)Cat. # Ref. ## Req. (Wt.)
1Complete Link Ass’y (Includes #2 thru #4)36-3335 3335AR (9.0)36-3319 33191 (8.8)36-3319 33191 (8.8)36-3319 33191 (8.8)36-3319 33191 (8.8)
2Link36-3306 33061 (4.5)36-3306 33061 (4.5)36-3306 33061 (4.5)36-3306 33061 (4.5)36-3306 33061 (4.5)
3Intermediate Pin (w/Cotter)36-3307 33071 (.80)36-3307 33071 (.80)36-3307 33071 (.80)36-3307 33071 (.80)36-3307 33071 (.80)
4Carrier Assembly (Includes #5 thru #9)36-3325 33251 (3.0)36-3324 33241 (2.5)36-3324 33241 (2.5)36-3324 33241 (2.5)36-3324 33241 (2.5)
5Die Grip36-3333 33331 (1.5)36-3310 33101 (.88)36-3310 33101 (.88)36-3310 33101 (.88)36-3310 33101 (.88)
6Carrier Die36-3309 33091 (3.0)36-3309 33091 (3.0)36-3309 33091 (3.0)36-3309 33091 (3.0)36-3309 33091 (3.0)
7Spring36-3311 33111 (.02)36-3311 33111 (.02)36-3311 33111 (.02)36-3311 33111 (.02)36-3311 33111 (.02)
8Roll Pin97-82-0818 51604-181 (.10)97-82-0818 51604-181 (.10)97-82-0818 51604-181 (.10)97-82-0818 51604-181 (.10)97-82-0818 51604-181 (.10)
9Cotter Pin for Carrier97-90-1030 51405-281 (.09)97-90-1030 51405-281 (.09)97-90-1030 51405-281 (.09)97-90-1030 51405-281 (.09)97-90-1030 51405-281 (.09)
10Dowell Pin, 3/8” x 7/8”36-9700 50060-07-01 (.03)36-9700 50060-07-01 (.03)36-9700 50060-07-01 (.03)36-9700 50060-07-01 (.03)36-9700 50060-07-01 (.03)
11Link Side Bars, Set of 236-3316 33161 (3.0)36-3316 33161 (3.0)36-3316 33161 (3.0)36-3316 33161 (3.0)36-3316 33161 (3.0)
12Latch Link36-3304 33041 (5.8)36-3304 33041 (5.8)36-3304 33041 (5.8)36-3304 33041 (5.8)36-3321 33211 (10)
13Screw Pin (w/Cotter)36-3308 33081 (.80)36-3308 33081 (.80)36-3308 33081 (.80)36-3308 33081 (.80)36-3308 33081 (.80)
14Screw Pin Bushing36-3315 33151 (.40)36-3315 33151 (.40)36-3315 33151 (.40)36-3315 33151 (.40)36-3315 33151 (.40)
15Cotter Pin for Link Pin97-90-1010 51405-10AR (.02)97-90-1010 51405-10AR (.02)97-90-1010 51405-10AR (.02)97-90-1010 51405-10AR (.02)97-90-1010 51405-10AR (.02)
16Screw36-3302 33021 (4.5)36-3302 33021 (4.5)36-3302 33021 (4.5)36-3302 33021 (4.5)36-3302 33021 (4.5)
17Thrust Washer36-2714 27141 (1.2)36-2714 27141 (1.2)36-2714 27141 (1.2)36-2714 27141 (1.2)36-2714 27141 (1.2)
18Nut36-3303 33031 (3.5)36-3303 33031 (3.5)36-3303 33031 (3.5)36-3303 33031 (3.5)36-3303 33031 (3.5)
19Handle36-3305 33052 (4.2)36-3305 33052 (4.2)36-3305 33052 (4.2)36-3305 33054 (4.2)36-3305 33054 (4.2)
20Wrench36-3320 33201 (4.9)36-3320 33201 (4.9)36-3320 33201 (4.9)36-3320 33201 (4.9)36-3320 33201 (4.9)
21Box (Optional) (Not Shown)36-3331 33311 (50)36-3331 33311 (50)36-3331 33311 (50)36-3331 33311 (50)36-3334 33341 (84)
22Holdown Lug (Optional) (Not Shown)36-3316 33162 (5.8)36-3316 33162 (5.8)36-3316 33162 (5.8)36-3316 33164 (5.8)36-3316 33164 (5.8)
23Lifting Eye (Not Shown)36-3317 33172 (4.8)36-3317 33172 (4.8)36-3317 33172 (4.8)36-3317 33174 (4.8)36-3317 33174 (4.8)
BJ 50 Ton Slip Spiders
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Slip Assemblies
250-160829693Slip Body Assembly with 2-7/8” Inserts55.01A/R
Replacement Parts
250-3925943485-17Air Cylinder6.01A/R
250-8400N/ARepair Kit for Air Cylinder1.51A/R
250-3900N/ACross Pin for Shaft0.11A/R
250-39051043Air Cylinder Piston Head0.11A/R
250-3910N/ABarrel2.01A/R
250-39151042Air Cylinder Piston Head0.21A/R
250-6400N/AStainless Steel Shaft2.01A/R
250-210029677Lifting Arm-Left1.01A/R
250-210529678Lifting Arm-Right1.01A/R
250-9700940585-66Shoulder Bolt, Arm Pivot Pin0.72A/R
250-110036179Hinge Pin1.52A/R
250-950030149Hinge Pin Spring0.22A/R
Replacement Slip Inserts, 2-7/8”
10-080229259Reducing Insert, 2-7/8″ x 1″ (1.315″)1.366
10-080429257Reducing Insert, 2-7/8″ x 1-1/2″ (1.900″)1.266
10-080329258Reducing Insert, 2-7/8″ x 1-1/4″ (1.660″)1.366
10-080629256Reducing Insert, 2-7/8″ x 2 -1/16″ (2.062″)1.166
10-0807DM29255Reducing Insert, 2-7/8″ x 2-3/8″ (Directional Machine)1.066
10-0808DM24773Basic Insert, 2-7/8″ x 2-7/8″ (Directional Machine)0.766
Replacement Slip Inserts, 3-1/2”
10-130830358Reducing Insert, 3-1/2″ x 2-7/8″1.01212
10-131324774Basic Insert, 3-1/2″ x 3-1/2″0.51212
10-1313DM24774DMBasic Insert, 3-1/2″ x 3-1/2″ (Directional Machine)0.51224
BJ 100 Ton Slip Spiders
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Slip Inserts, 2-7/8”
10-080229259Reducing Insert, 2-7/8″ x 1″ (1.315″)1.3912
10-080429257Reducing Insert, 2-7/8″ x 1-1/2″ (1.900″)1.2912
10-080329258Reducing Insert, 2-7/8″ x 1-1/4″ (1.660″)1.3912
10-080629256Reducing Insert, 2-7/8″ x 2-1/16″ (2.062″)1.1912
10-0807DM29255Reducing Insert, 2-7/8″ x 2-3/8″ (Directional Machine)1.0912
10-0808DM24773Basic Insert, 2-7/8″ x 2-7/8″ (Directional Machine)0.7912
Replacement Slip Inserts, 3-1/2
10-130830358Reducing Insert, 3-1/2″ x 2-7/8″1.01818
10-131324774Basic Insert, 3-1/2″ x 3-1/2″0.51818
Model B Cavins Tubing Spiders
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Model B Full Circle Replacement Inserts, 2-7/8” Body
260-0803TB-651-1-1/4FCI for Cavins Model B, 2-7/8″ x 1-1/4″14.444
260-0804TB-651-1-1/2FCI for Cavins Model B, 2-7/8″ x 1-1/2″13.844
260-0806TB-651-2-1/16FCI for Cavins Model B, 2-7/8″ x 2-1/16″3.2044
260-0807TB-651-2-3/8FCI for Cavins Model B, 2-7/8″ x 2-3/8″2.3044
260-0808TB-650-2-7/8FCI for Cavins Model B, 2-7/8″ x 2-7/8″1.6044
Model B Replacement Chevron Inserts (Set of 8 replaces 6 Left & 6 Right)
260-5007TB-160-2-3/8Chevron Insert for Cavins Model B, 2-3/8”0.2088
260-5008TB-160-2-7/8Chevron Insert for Cavins Model B, 2-7/8”0.2088
Model B & C Replacement Button Inserts
14-5107TB-156-2-3/8Button Insert for Cavins, 2-3/8″0.2024 (B) / 28 (C)24
14-5108TB-156-2-7/8Button Insert for Cavins, 2-7/8″0.2024 (B) / 28 (C)24
14-5113TB-156-3-1/2Button Insert for Cavins, 3-1/2″0.2024 (B) / 28 (C)24
14-5121TC-156-4-1/2Button Insert for Cavins, 4-1/2″0.2056 (C)56
Model C Cavins Tubin Spiders
Model C Tubing Spider & Slip Body Assemblies
261-1000TC100-CSpider Model C 82.5 Ton, 1” to 5-1/2” (Less Slip Body & Inserts)45711
261-1000HDTC-100-CHDSpider Model C-HD 125 Ton, 1” to 5-1/2” (Less Slip Body & Inserts)48511
261-1013TC101-CSpider Model C 82.5 Ton, with 3-1/2″ Slip Body (Less Inserts)46011
261-1013HDTC101-CHDSpider Model C-HD 125 Ton, with 3-1/2” Slip Body (Less Inserts)50511
261-1613TC600Slip Body Ass’y Model C, 3-1/2” (Less Inserts)45.011
261-1621N/ASlip Body Ass’y Model C, 4-1/2″ (Less Inserts)45.011
14-1800TC601Insert Retainer Pin0.304A/R
14-9700N/ABolt & Nylock Nut Kit Model B & C, 5/8” x 3-3/4”0.501A/R
Model C’ Replacement Inserts, 3-1/2” Slip Body
261-1303N/AFCI for Cavins Model C, 3-1/2″ x 1-1/4″5.244
261-1304N/AFCI for Cavins Model C, 3-1/2″ x 1-1/2″5.244
261-1306N/AFCI for Cavins Model C, 3-1/2″ x 2-1/16″5.044
261-1307TC-651-2-3/8FCI for Cavins Model C, 3-1/2″ x 2-3/8″4.044
261-1308TC-651-2-7/8FCI for Cavins Model C, 3-1/2″ x 2-7/8″3.544
261-1313TC-650-3-1/2FCI for Cavins Model C, 3-1/2″ x 3-1/2″2.244
Model C’ Replacement Inserts, 4-1/2” Slip Body
261-2113TC-651-4 1/2 x 3 1/2FCI for Cavins Model C 4-1/2” x 3-1/2”5.5044
261-2117TC-651-4 1/2 x 4”FCI for Cavins Model C 4-1/2” x 4”4.5044
261-2121TC-651-4 1/2 x 4-1/2”FCI for Cavins Model C 4-1/23.0044
Cavins Tubing Spiders Models C
Replacement Inserts
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Model C’ Replacement Inserts for 4-1/2” Slip Body
261-2113TC-651-3-1/2FCI for Cavins Model C, 4-1/2″ x 3-1/2″5.344
261-2117TC-651-4FCI for Cavins Model C, 4-1/2″ x 4″4.244
261-2121TC-650-4-1/2FCI for Cavins Model C, 4-1/2″ x 4-1/2″3.044
Cavins Tubing Spiders Replacement Parts
No. Req.Part Name/lodel B/lodel CModel C-HD
Cat. #OEM #Wt.Cat. #OEM #Wt.Cat. #OEM #Wt.
1Link Assembly260-4995TB1035.00261-4995TC1035.00261-4995TC1035.00
1LinkTB103-1TC103-1TC103-1
2Grease Fitting260-9890TB1230.10260-9890TB1230.10260-9890TB1230.10
2Link Bushing14-9405TB1250.1014-9405TB1250.1014-9405TB1250.10
1Left Hand Shaft260-6405TB1047.00261-6405TC1047.00261-6405TC1047.00
1Right Hand Shaft260-6410TB1057.00261-6410TC1057.00261-6410TC1057.00
2Lift Arm260-7106TB1063.00261-7106TC1063.00261-7106TC1063.00
2Set Screw260-9750TB1180.10260-9750TB1180.10260-9750TB1180.10
1Lift Arm Bolt260-9760-1TB1160.50260-9760-1TB1160.50260-9760-1TB1160.50
1Lift Arm Nut260-9760-2TB1170.20260-9760-2TB1170.20260-9760-2TB1170.20
1Air Cylinder GuardTB108TC108TC108
5Guard ScrewTB113TB113TB113
1Gate Bolt260-9700TB1150.10261-9760TC1150.20261-9760TC1150.20
1Gate Bolt Nut260-9755TB1140.10261-9750TC1140.20261-9750TC1140.20
4Taper Pin261-7119TB1190.20261-7119TB1190.20261-7119TB1190.20
2Retaining Ring260-1990TB1220.20260-1990TB1220.20260-1990TB1220.20
4Grease Fitting260-9890TB1230.10260-9890TB1230.10260-9890TB1230.10
4Shaft Bushing260-9400TB1242.00261-9400TC1240.20261-9400TC1240.20
2Spacer260-9410TB1260.10261-9420TC1260.10261-9420TC1260.10
1Safety Latch14-2000TB1350.7514-2000TB1350.7514-2000TB1350.75
1Safety Latch Bolt261-9710TB1360.10261-9710TB1360.10261-9710TB1360.10
1Air Cylinder Ass’y (Bronze)261-3902TB140-N12.5261-3902TB140-N12.5261-3902TB140-N12.5
1Air Cylinder Repair Kit261-8400TB140-R1.50261-8400TB140-R1.50261-8400TB140-R1.50
1Male Q/C CouplingTB128TB128TB128
1Flow Control Q/C CoupTB130TB130TB130
Accessories
1AC Unit w/Valve, Pressure Regulator & Gauges261-9900TB410-P25.0261-9900TB410-P25.0261-9900TB410-P25.0
1Air Hose 25′ Q/DC261-9910TB4105.00261-9910TB4105.00261-9910TB4105.00
1Air Foot Control Valve261-9905NA10.0261-9905NA10.0261-9905NA10.0
Model GS-60 Tubing Spider Assembly P/N 26-1005
(Less Foot Valve, Slip Assembly and Inserts)
Air Cylinder Ass’y
P/N 26-1035
GS-60 Tubing Spider Assembly & Parts
(Less Slip Assembly & Inserts)
Ref.Part #OEMDescriptionQtWt.
26-1000Spider Ass’y, w/Plain Gate, Air Cylinder & Foot Valve Only1275
26-100561005-100Spider Ass’y w/Air Cylinder (Less Foot Valve & Slip Body)1260
326-101561000Spider Bowl with Tension Bushings Only1215
426-1015-2992550-01-01Steel Tension Bushing40.03
526-102061 01 0Lift Arm14.00
626-102561 01 5Gate115.6
26-103061022-100Gate Pin Assembly14.30
826-1030-161 01 3Gate Pin22.10
926-1030-261020Bendable Chain Loop20.07
1026-1030-3992445-04Double Loop Coil Chain, #2 Zinc Plated10.42
1226-103561024-100Air Cylinder Assembly15.50
1326-1035-161014Brass Cylinder Barrel1
1426-1035-261 01 6Cylinder End1
1526-1035-361 01 7Cylinder Cap1
1626-1035-461 01 8Cylinder Stem1
26-104061032-100Air Cylinder Repair Kit11.00
1897-90-0406992012-09Cotter Pin10.01
1926-1040-2992154-012O-Ring10.01
2026-1040-3992154-210O-Ring10.01
2126-1040-4992154-232O-Ring20.01
2297-61-1200992155-04Flat Washer10.01
2326-1040-6992213-06Finished Slotted Hex Nut10.25
2426-1040-7992224-61Button Head Capscrew60.05
2526-1040-8992548-23Piston & Seal Assembly10.01
2626-1040-9992549-01Wiper Seal10.01
26-104561025-100Mounting System1
2826-1045-191021-200Cylinder Housing112.2
2926-1045-261030-100Bolt Kit, Cylinder Mounting & Lift Arm1
3026-1045-361 01 2Pivot Pin10.17
3197-90-0416992011-98Cotter Pin for Pivot Pin20.02
3297-05-1628-2561 01 9Lift Arm Bolt10.12
3497-01-1240-21992033-18Hex Head Capscrew10.34
3597-42-1600-25992089-09Nut with Nylok10.04
3697-61-1200992155-04Flat Washer40.01
3797-60-1600992155-06SAE Flat Washer40.01
3897-12-1236-21992218-16Socket Head Shoulder Screw20.30
3997-41-1200-21992501-11Flex Lock Hex Nut30.02
4126-1050-1992349-004Pipe Nipple40.08
4226-1050-2M-Style Female Connector, 1/4”20.05
4326-1050-3992186-0490° Elbow20.11
Tubing Spider Foot Control Assembly
Ref.Part #OEMDescriptionQtyWt. Each
7026-105561038-100Foot Control Valve Ass’y with Cover, Hose & Regulator120.00
7126-1055-165200-100Cover with Pneumatic Foot Control Valve Assembly112.00
7226-1055-265300Pneumatic Hose Assembly (15 Foot)23.00
7326-1055-365410-100In-line Pneumatic Regulator with Filter Assembly12.00
Guiberson T-60 Tubing Spiders
The T-60 is rated at 60 tons. • Can handle 25,000 feet of 2-3/8” tubing. • Accommodates pipe from 1” (1.315”) to 4-1/2”.
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Tool Assemblies
265-100062454T-60 Spider w/Plain Gate, Foot Valve & 2-7/8” Slip Body (Less Ins.)3101NA
265-100567580T-60 Spider w/Plain Gate & 2-7/8” Slip Body Only (Less Inserts)2961NA
265-102062458T-60 Spider w/Plain Gate, Foot Valve & 3-1/2” Slip Body (Less Ins.)3101NA
265-1025NAT-60 Spider w/Plain Gate & 3-1/2” Slip Body Only (Less Inserts)2961NA
Replacement Slip Bodies
265-161562461Slip Body Ass’y, 2-7/8″ (Less Inserts)3611
265-162062462Slip Body Ass’y, 3-1/2” (Less Inserts)3611
Replacement Parts
265-840556812Slip Kit for T-60, 2 Bolt Ass’y with 2 Springs1.51AR
265-950554219Slip Spring0.32AR
265-9700NASlip Bolt Assembly0.72AR
97-12-1636-21NAShoulder Bolt, 4-1/2”0.41AR
97-60-1600NAWasher, Flat 1/2” SAE Z 10.11A/R
97-61-1200NAWasher, Flat 3/8” USS Z 10.11A/R
97-41-1200-21NANut, Hex 3/8”-16 Flexloc TP Z10.11A/R
Replacement Inserts
265-080262474Insert for Guiberson, 2-7/8″ x 1” (1.315″)0.751818
265-080362475Insert for Guiberson, 2-7/8″ x 1-1/4′ (1.660″)0.631818
265-080462476Insert for Guiberson, 2-7/8″ x 1-1/2” (1.900″)0.591818
265-080662478Insert for Guiberson, 2-7/8″ x 2-1/16” (2.062″)0.561818
265-080742586Insert for Guiberson, 2-7/8″ x 2-3/8″0.471818
265-080842587Insert for Guiberson, 2-7/8″ x 2-7/8″0.341818
265-131342588Insert for Guiberson, 3-1/2″ x 3-1/2″0.341818
97-90-1010NACotter Pin for Inserts0.0266
Oil Country Type G Tubing Spiders
Cat. #Ref. #DescriptionWt. Ea.Qty. Req.Box
Replacement Tool Assemblies
268-100061000-100Spider Ass’y w/Plain Gate, Foot Valve & 3-1/2” Slip Body (Less Ins.)3101NA
268-1005NASpider Ass’y w/Plain Gate & 3-1/2” Slip Body Only (Less Inserts)2961NA
268-1020NASpider Ass’y w/Plain Gate, Foot Valve & 4-1/2” Slip Body (Less Ins.)3101NA
268-1025NASpider Ass’y w/Plain Gate & 4-1/2” Slip Body Only (less inserts)2961NA
Replacement Slip Bodies
268-161361003-100Slip Body Oil Country G, 3-1/2” (Less Inserts)29.01A/R
268-162161039-100Slip Body Oil Country G, 4-1/2” (Less Inserts)40.01A/R
Replacement Parts
268-180061008Insert Retainer Pin0.051A/R
97-90-0510992012-43Cotter Pin for Inserts0.063A/R
268-9400N/AMounting Bolt Bushing0.501A/R
268-8450NASlip Body Bolt & Spring Kit2.001A/R
97-12-1636-21NAShoulder Bolt1 .002A/R
268-950061033Slip Body Spring, 3-1/2”0.502A/R
268-950561044Slip Body Spring, 4-1/2”0.502A/R
97-61-1200992155-04Flat Washer0.102A/R
97-41-1200-21992501-11Flex Lock Hex Nut0.2555A/R
Replacement Inserts – 3-1/2” Slip Body
268-130261041-02Insert For Oil Country G, 3-1/2” x 1” (1.315”)7.033
268-130361041-03Insert For Oil Country G, 3-1/2″ x 1-1/4” (1.660″)5.633
268-130461041-04Insert For Oil Country G, 3-1/2″ x 1-1/2” (1.900”)5.233
268-130661041-05Insert For Oil Country G, 3-1/2″ x 2-1/16”4.533
268-130761006-01Insert For Oil Country G, 3-1/2″ x 2-3/8”4.033
268-130861006-02Insert For Oil Country G, 3-1/2″ x 2-7/8”3.533
268-131361006-03Insert For Oil Country G, 3-1/2″ x 3-1/2”3.033
Replacement Inserts – 4-1/2” Slip Body
268-211361040-01Insert For Oil Country G, 4-1/2″ x 3-1/2”8.033
268-211761040-02Insert For Oil Country G, 4-1/2″ x 4”6.033
268-212161040-03Insert For Oil Country G, 4-1/2″ x 4-1/2”3.033
Solid & Plate Type Sucker Rod Elevator
Rod Elevators available to handle rod sizes from 1/2” through 1-1/8”. Elevator assemblies use a spring loaded latch and
the rod can only be released by the operator. The bail and body is made from alloy steel and heat treated for maximum
strength and durability. All steel specifications are certified and rod elevator is rated at 20 ton capacity.
Cat. #    Rod Size Wt. Lbs. Ea.
Solid Body Elevator Assembly
290-10005/8” to 3/4”30.0
290-10103/4” to 7/8”30.0
290-10201”30.0
Plate Type Elevator Assembly
290-1040    1/2” to 1-1/8”    30.0
Cat. #DescriptionQty. Req.Wt. Ea.
Replacement Parts
290-2000Back Latch20.50
290-2010Front Latch for 5/8” to 3/4”20.50
290-2020Front Latch for 3/4” to 7/8”20.50
290-2030Front Latch for 1”20.50
290-9500Spring20.10
290-9950Roll Pin40.10
290-1900Retainers20.10
Expendable Parts
290-9900Replacement Plate, 1/2”20.50
290-9905Replacement Plate, 5/8” to 3/4”20.50
290-9910Replacement Plate, 3/4” to 7/8”20.50
290-9915Replacement Plate, 1”20.50
290-9920Replacement Plate, 1-1/8”20.50
290-9700Screw for Plates40.20
Posted in InventoryList.