Honghua HHF-2400 Mud pump Pinion shaft Crosshead assembly parts list
| Pinion shaft assembly NB001.03.00 | |||
| No. | Description | Drawing No. (code) | Qty. |
| 1 | Left-hand pinion | NB001.03.01 | 1 |
| 2 | Motor | HTB34 | 1 |
| 3 | Right-hand pinion | NB001.03.02 | 1 |
| Crosshead component NB005.04.00 | |||
| No. | Description | Drawing No. (code) | Qty. |
| 1 | Screw M12x60 | GB/T70.1-2000 | 16 |
| 2 | Liner | NB001.04.10 | 16 |
| 3 | Taper liner | NB001.04.05 | 16 |
| 4 | Upper slideway, crosshead | NB001.04.04 | 1 |
| 5 | O-ring | 335×3.55 | 1 |
| 6 | Mud guard | NB005.04.13 | 1 |
| 7 | Clamp plate, mud guard | NB005.04.12 | 1 |
| 8 | Bolt | M12x55 | 1 |
| 9 | Intermediate tie rod | NB001.04.08 | 1 |
| 10 | O-ring 160×3.55-G-S | GB/T3452.1-2005 | 6 |
| 11 | Two-lip seal | NB800M.04.22 | 2 |
| 12 | O-ring 103×5.3-G-S | GB/T3452.1-2005 | 1 |
| 13 | Sealing washer | NB800G.04.07 | 1 |
| 14 | Bolt M10x45 | GB/T5780-1986 | 4 |
| 15 | Washer 10 | GB/T93-1987 | 4 |
| 16 | End cover | NB800G.04.08 | 1 |
| 17 | Dust seal | CCK-1000 | 1 |
| 18 | Baffle ring | NB800G.04.11 | 1 |
| 19 | Oil seal ring | NB800G.04.05 | 1 |
| 20 | Packing box | NB800G.04.06 | 1 |
| 21 | Bolt M20x60 | GB/T32.1-1988 | 4 |
| 22 | Stainless steel wire ΦI.6 | GB/T4240-1993 | 1 |
| 23 | Crosshead assembly | NB001.04.01(03) | 1 |
| 24 | Rubber liner | NB005.04.15 | 6 |
| 25 | Lower slideway, crosshead | NB001.04.09 | 1 |
| 26 | Plug NPT3/8 | ZT085.23.05 | 2 |
| 27 | Fastening screw | NB001.04.07 | 1 |
| 28 | Sprialock nut M20x2 | DTF6177 | 2 |
| 29 | Conical head fastening screw | NB001.04.06 | 1 |
| 30 | Crosshead pin | NB001.04.02 | 1 |