| LANZHOU LS-NATIONAL OIL WELL PETROLEUM ENGINEERING CO. LTD. | |
| LANZHOU LSNOI HOOK DG450, DG350 DG315, DG250 DG225 PARTS LIST | |
| DG450 HOOK PARTS LIST | |
| DESCRIPTION | PART NO. |
| Hook | 103.06.00 |
| Bail | 103.07.01 |
| Shank | 103.07.01.01 |
| Pin, bai 1 | 103.07.02 |
| Screw with head-holes | GB32.1-88 (Ml 6×45) |
| Wire | 4ยป1.5 |
| Sea 1, o i1 | D7-1-67 (180x220x15) |
| Retainer, seal | 103.04.04 |
| Positioner | 103.04.05 |
| Spring, positioner | 103.04.06 |
| Bushing,barrel (upper) | 103.04.07 |
| Support,bai1 | 103.06.06 |
| Nut,thin | 103.04.09 |
| Screw, hex soc. hd | GB70-85 (Ml 2×25) |
| Washer,spring | GB93-87 (12) |
| Barrel (upper) | 103.04.38 |
| Barrel (lower) | 103.07.04 |
| Pin | 103.04.12 |
| Spring,shank | 103.04.13 |
| Spring,shank | 103.04.14 |
| 0-Ring | 103.04.15 (455×8.6) |
| Bushing,barrel (lower) | 103.04.16 |
| Support,spring | 103.04.17 |
| Key, lock | 103.04.18 |
| Lock assembly | 103.04.01.00 |
| Latch, tongue | 103.04.19 |
| Plunger,tongue latch | 103.04.20 |
| Spring tongue latch | 103.04.21 |
| Hook | 103.06.00 |
| Arm,lower locking | 103.04.22 |
| Pin,tongue | 103.04.23 |
| Body | 103.06.02 |
| Pin, cotter | GB91-86 (10X160) |
| Nut,thin hex sloted | 103.04.33 (M90x3) |
| Key, lock | 103.04.25 |
| Plug | 103.04.34 |
| Plate, I.D | 103.06.05 |
| Screw | GB67-85 (M4X8) |
| Plate,fixed | 103.04.27 |
| Screw, hex soc hd | GB70-85 (Ml 6×40) |
| Washer,spring | GB93-87 (16) |
| Nut,shank bearing | 103.04.05.02 |
| Pin, 1 ink (lower) | 103.04.42-1 (30×158) |
| Pin, 1 ink (upper) | |
| Link | 103.04.29 |
| Pin, 1 ink (upper) | 103.04.30 |
| Ring, lock | 103.04.31 |
| Ring, stop | 103.04.32 |
| Bearing | 7549436 |
| Grease fitting | GB1152-89 (Ml 0X1) |
| Plate, lock | 103.07.07 |
| Screw | 103.07.08 (M24x50) |
| Hook | 103.06.00 |
| Rod operating | 103K.04.10.00 |
| Lock assembly | 103.04.01.00 |
| 0-Ring | D4-4-66 (28X3.5) |
| Hous i ng | 103.04.01.05 |
| 0-Ring | D4-4-66 (100X5.7) |
| Spring, latch | 103.04.01.06 |
| Spring, pawl | 103.04.01.07 |
| 0-Ring | D4-4-66 (90X5.7) |
| Shaft, pawl | 103.04.03.00 |
| Lever | 103.04.02.01 |
| Shaft | 103.04.03.01 |
| Lock block | 103.04.03.02 |
| Pin | 103.04.03.03 |
| Shaft,Latch | 103.04.02.00 |
| Lever | 103.04.02.01 |
| Shaft | 103.04.02.02 |
| Latch | 103.04.02.03 |
| Pin | 103.04.02.04 (8×35) |
| DG315 HOOK PARTS LIST | |
| DESCRIPTION | PART NO. |
| Hook | 103.07.00 |
| Bail | 103.07.01 |
| Shank | 103.07.01.01 |
| Pin, bai 1 | 103.07.02 |
| Screw with head-holes | GB32.1-88 (Ml 6×45) |
| Wire | 4*1.5 |
| Sea 1, o i1 | D7-1-67 (180x220x15) |
| Retainer, seal | 103.04.04 |
| Positioner | 103.04.05 |
| Spring, positioner | 103.04.06 |
| Bushing,barrel (upper) | 103.04.07 |
| Support,bai1 | 103.07.12 |
| Nut,thin | 103.04.09 |
| Screw, hex soc. hd | GB70-85(Ml 2×25) |
| Washer,spring | GB93-87 (12) |
| Barrel (upper) | 103.04.38 |
| Barrel (lower) | 103.07.04 |
| Pin | 103.04.12 |
| Spring,shank | 103.04.13 |
| Spring,shank | 103.04.14 |
| 0-Ring | 103.04.15 (455×8.6) |
| Bushing,barrel (lower) | 103.04.16 |
| Support,spring | 103.04.17 |
| Key, lock | 103.04.18 |
| Lock assembly | 103.04.01.00 |
| Latch, tongue | 103.04.19 |
| Plunger,tongue latch | 103.04.20 |
| Spring tongue latch | 103.04.21 |
| Hook | 103.07.00 |
| Arm,lower locking | 103.04.22 |
| Pin,tongue | 103.04.23 |
| Body | 103.07.05 |
| Pin, cotter | GB91-86 (10X160) |
| Nut,thin hex sloted | 103.04.33 (M90x3) |
| Key, lock | 103.04.25 |
| Plug | 103.04.34 |
| Plate, I.D | 103.07.11 |
| Screw | GB67-85 (M4X8) |
| Plate,fixed | 103.04.27 |
| Screw, hex soc hd | GB70-85 (Ml 6×40) |
| Washer,spring | GB93-87 (16) |
| Nut,shank bearing | 103.04.05.02 |
| Pin, 1 ink (lower) | 103.04.42-1 (30×158) |
| Pin, 1 ink (upper) | |
| Link | 103.04.29 |
| Pin, 1 ink (upper) | 103.04.30 |
| Ring, lock | 103.04.31 |
| Ring, stop | 103.04.32 |
| Bearing | 7549436 |
| Grease fitting | GB1152-89 (Ml 0X1) |
| Plate, lock | 103.07.07 |
| Screw | 103.07.08 (M24x50) |
| Hook | 103.07.00 |
| Rod operating | 103K. 04.10.00 |
| Lock assembly | 103.04.01.00 |
| 0-Ring | D4-4-66 (28X3.5) |
| Hous i ng | 103.04.01.05 |
| 0-Ring | D4-4-66 (100X5.7) |
| Spring, latch | 103.04.01.06 |
| Spring, pawl | 103.04.01.07 |
| 0-Ring | D4-4-66 (90X5.7) |
| Shaft, pawl | 103.04.03.00 |
| Lever | 103.04.02.01 |
| Shaft | 103.04.03.01 |
| Lock block | 103.04.03.02 |
| Pin | 103.04.03.03 |
| Shaft,Latch | 103.04.02.00 |
| Lever | 103.04.02.01 |
| Shaft | 103.04.02.02 |
| Latch | 103.04.02.03 |
| Pin | 103.04.02.04 (8×35) |
| DG350 HOOK PARTS LIST | |
| DESCRIPTION | PART NO. |
| Hook | 103.04.00-1 |
| Bail | 103.04.35 |
| Shank | 103.04.05.01 |
| Pin, bai 1 | 103.04.03 |
| Screw with head-holes | GB32.1-88 (Ml 6×45) |
| Wire | 4)1.5 |
| Sea 1, o i1 | D7-1-67 (180x220x15) |
| Retainer, seal | 103.04.04 |
| Positioner | 103.04.05 |
| Spring, positioner | 103.04.06 |
| Bushing,barrel (upper) | 103.04.07 |
| Support,bai1 | 103.04.44 |
| Nut,thin | 103.04.09 |
| Screw, hex soc. hd | GB70-85 (Ml 2×25) |
| Washer,spring | GB93-87 (12) |
| Barrel (upper) | 103.04.38 |
| Barrel (lower) | 103.07.11 |
| Pin | 103.04.12 |
| Spring,shank | 103.04.13 |
| Spring,shank | 103.04.14 |
| 0-Ring | 103.04.15 (455×8.6) |
| Bushing,barrel (lower) | 103.04.16 |
| Support,spring | 103.04.17 |
| Key, lock | 103.04.18 |
| Lock assembly | 103.04.01.00 |
| Latch, tongue | 103.04.19 |
| Plunger,tongue latch | 103.04.20 |
| Spring tongue latch | 103.04.21 |
| Hook | 103.04.00-1 |
| Arm,lower locking | 103.04.22 |
| Pin,tongue | 103.04.23 |
| Body | 103.04.24-1 |
| Pin, cotter | GB91-86 (10X160) |
| Nut,thin hex sloted | 103.04.33 (M90x3) |
| Key, lock | 103.04.25 |
| Plug | 103.04.34 |
| Plate, I.D | 103.04.43 |
| Screw | GB67-85 (M4X8) |
| Plate,fixed | 103.04.27 |
| Screw, hex soc hd | GB70-85 (M16x40) |
| Washer,spring | GB93-87 (16) |
| Nut,shank bearing | 103.04.05.02 |
| Pin, 1 ink (lower) | 103.04.42-1 (30×158) |
| Pin, 1 ink (upper) | |
| Link | 103.04.29 |
| Pin, 1 ink (upper) | 103.04.30 |
| Ring, lock | 103.04.31 |
| Ring, stop | 103.04.32 |
| Bearing | 7549436 |
| Grease fitting | GB1152-89 (Ml 0X1) |
| Plate, lock | |
| Screw | |
| Hook | 103.04.00-1 |
| Rod operating | 103K. 04.10.00 |
| Lock assembly | 103.04.01.00 |
| 0-Ring | D4-4-66 (28X3.5) |
| Hous i ng | 103.04.01.05 |
| 0-Ring | D4-4-66 (100X5.7) |
| Spring, latch | 103.04.01.06 |
| Spring, pawl | 103.04.01.07 |
| 0-Ring | D4-4-66 (90X5.7) |
| Shaft, pawl | 103.04.03.00 |
| Lever | 103.04.02.01 |
| Shaft | 103.04.03.01 |
| Lock block | 103.04.03.02 |
| Pin | 103.04.03.03 |
| Shaft,Latch | 103.04.02.00 |
| Lever | 103.04.02.01 |
| Shaft | 103.04.02.02 |
| Latch | 103.04.02.03 |
| Pin | 103.04.02.04 (8×35) |
| DG225 HOOK PARTS LIST | |
| DESCRIPTION | PART NO. |
| Hook | 103.08.00 |
| Bail | 103.08.01 |
| Shank | 103.08.10.01 |
| Pin, bai 1 | 103.08.02 |
| Screw with head-holes | GB32.1-88 (M16x45) |
| Wire | *1.5 |
| Sea 1, o i1 | D7-1-67 (160x190x15) |
| Retainer, seal | 103.05.05 |
| Positioner | 103.05.06 |
| Spring, positioner | 103.05.07 |
| Bushing,barrel (upper) | 103.05.08 |
| Support,bai1 | 103.08.10 |
| Nut,thin | 103.04.09 |
| Screw, hex soc. hd | GB70-85 (Ml 2×25) |
| Washer,spring | GB93-87 (12) |
| Barrel (upper) | 103.05.11 |
| Barrel (lower) | 103.08.04 |
| Pin | 103.05.13 |
| Spring,shank | 103.05.10 |
| Spring,shank | 103.05.09 |
| 0-Ring | 103.05.14 |
| Bushing,barrel (lower) | 103.05.15 |
| Support,spring | |
| Key, lock | 103.04.18 |
| Lock assembly | 103.04.01.00 |
| Latch, tongue | 103.05.18 |
| Plunger,tongue latch | 103.04.20 |
| Spring tongue latch | 103.04.21 |
| Hook | 103.08.00 |
| Arm,lower locking | 103.05.19 |
| Pin,tongue | 103.05.20 |
| Body | 103.08.05 |
| Pin, cotter | GB91-86 (10X160) |
| Nut,thin hex sloted | 103.05.22 |
| Key, lock | 103.04.25 |
| Plug | 103.04.34 |
| Plate, I.D | 103.08.09 |
| Screw | GB67-85 (M4X8) |
| Plate,fixed | 103.05.28 |
| Screw, hex soc hd | GB70-85 (M16x40) |
| Washer,spring | GB93-87 (16) |
| Nut,shank bearing | 103.05.05.02 |
| Pin, 1 ink (lower) | |
| Pin, 1 ink (upper) | 103.05.27 |
| Link | 103.05.26 |
| Pin, 1 ink (upper) | 103.05.24 |
| Ring, lock | 103.05.17 |
| Ring, stop | 103.05.16 |
| Bearing | 3-939 |
| Grease fitting | GB1152-89 (Ml 0X1) |
| Plate, lock | 103.08.07 |
| Screw | 103.07.08 (M24x50) |
| Hook | 103.08.00 |
| Rod operating | 103K.04.10.00 |
| Lock assembly | 103.04.01.00 |
| 0-Ring | D4-4-66 (28X3.5) |
| Hous i ng | 103.04.01.05 |
| 0-Ring | D4-4-66 (100X5.7) |
| Spring, latch | 103.04.01.06 |
| Spring, pawl | 103.04.01.07 |
| 0-Ring | D4-4-66 (90X5.7) |
| Shaft, pawl | 103.04.03.00 |
| Lever | 103.04.02.01 |
| Shaft | 103.04.03.01 |
| Lock block | 103.04.03.02 |
| Pin | 103.04.03.03 |
| Shaft,Latch | 103.04.02.00 |
| Lever | 103.04.02.01 |
| Shaft | 103.04.02.02 |
| Latch | 103.04.02.03 |
| Pin | 103.04.02.04 (8×35) |
| DG250 HOOK PARTS LIST | |
| DESCRIPTION | PART NO. |
| Hook | 103.05.00 |
| Bail | 103.05.01 |
| Shank | 103.05.05.01 |
| Pin, bai 1 | 103.05.03 |
| Screw with head-holes | GB32.1-88 (Ml 6×45) |
| Wire | *1.5 |
| Sea 1, o i1 | D7-1-67 (160x190x15) |
| Retainer, seal | 103.05.05 |
| Positioner | 103.05.06 |
| Spring, positioner | 103.05.07 |
| Bushing,barrel (upper) | 103.05.08 |
| Support,bai1 | 103.05.30 |
| Nut,thin | 103.04.09 |
| Screw, hex soc. hd | GB70-85 (Ml 2×25) |
| Washer,spring | GB93-87 (12) |
| Barrel (upper) | 103.05.11 |
| Barrel (lower) | 103.05.12 |
| Pin | 103.05.13 |
| Spring,shank | 103.05.10 |
| Spring,shank | 103.05.09 |
| 0-Ring | 103.05.14 |
| Bushing,barrel (lower) | 103.05.15 |
| Support,spring | |
| Key, lock | 103.04.18 |
| Lock assembly | 103.04.01.00 |
| Latch, tongue | 103.05.18 |
| Plunger,tongue latch | 103.04.20 |
| Spring tongue latch | 103.04.21 |
| Hook | 103.05.00 |
| Arm,lower locking | 103.05.19 |
| Pin,tongue | 103.05.20 |
| Body | 103.05.21 |
| Pin, cotter | GB91-86 (10X160) |
| Nut,thin hex sloted | 103.05.22 |
| Key, lock | 103.04.25 |
| Plug | 103.04.34 |
| Plate, I.D | 103.05.29 |
| Screw | GB67-85 (M4X8) |
| Plate,fixed | 103.05.28 |
| Screw, hex soc hd | GB70-85 (Ml 6×40) |
| Washer,spring | GB93-87 (16) |
| Nut,shank bearing | 103.05.05.02 |
| Pin, 1 ink (lower) | |
| Pin, 1 ink (upper) | 103.05.27 |
| Link | 103.05.26 |
| Pin, 1 ink (upper) | 103.05.24 |
| Ring, lock | 103.05.17 |
| Ring, stop | 103.05.16 |
| Bearing | 3-939 |
| Grease fitting | GB1152-89 (Ml 0X1) |
| Plate, lock | |
| Screw | |
| Hook | 103.05.00 |
| Rod operating | 103K. 04.10.00 |
| Lock assembly | 103.04.01.00 |
| 0-Ring | D4-4-66 (28X3.5) |
| Hous i ng | 103.04.01.05 |
| 0-Ring | D4-4-66 (100X5.7) |
| Spring, latch | 103.04.01.06 |
| Spring, pawl | 103.04.01.07 |
| 0-Ring | D4-4-66 (90X5.7) |
| Shaft, pawl | 103.04.03.00 |
| Lever | 103.04.02.01 |
| Shaft | 103.04.03.01 |
| Lock block | 103.04.03.02 |
| Pin | 103.04.03.03 |
| Shaft,Latch | 103.04.02.00 |
| Lever | 103.04.02.01 |
| Shaft | 103.04.02.02 |
| Latch | 103.04.02.03 |
| Pin | 103.04.02.04 (8×35) |
Hookparts3
Posted in InventoryList.