| HILUYA ZHENGZHOU HSB-S Series centrifugal pump | ||||
| HSB10×8×14 | ||||
| HSB10×8×14 | ||||
| HSB10×8×14 | ||||
| HSB8×6×14 | ||||
| HSB8×6×14 | ||||
| HSB8×6×14 | ||||
| HSB8×6×14 | ||||
| HSB8×6×11 | ||||
| HSB8×6×11 | ||||
| HSB8×6×11 | ||||
| HSB8×6×11 | ||||
| HSB8×6×11 | ||||
| HSB6×5×14 | ||||
| HSB6×5×14 | ||||
| HSB6×5×14 | ||||
| HSB6×5×14 | ||||
| HSB6×5×14 | ||||
| HSB6×5×11 | ||||
| HSB6×5×11 | ||||
| HSB6×5×11 | ||||
| HSB5×4×14 | ||||
| HSB5×4×14 | ||||
| HSB5×4×14 | ||||
| HSB5×4×14 | ||||
| HSB4×3×13 | ||||
| HSB4×3×13 | ||||
| HSB4×3×13 | ||||
| HSB4×3×13 | ||||
| HSB3×2×13 | ||||
| HSB3×2×13 | ||||
| HSB3×2×13 | ||||
| HSB3×2×13 | ||||
| HSB-S Series centrifugal pump parts list | ||||
| Part name | Part No | HLY part # | ||
| Pump Casing | See the table | See the table | ||
| Sealing washer | 10399-46-1 | HSB-10399-46-1 | ||
| Tension nut 3/4 | 3932-61 | HSB-3932-61 | ||
| Tension bolt 3/4X85 | 3862-76 | HSB-3862-76 | ||
| Square block 3/8 | 2412519 | HSB-8505-04-01 | ||
| Square block 1/2 | 2412519 | HSB-8505-04-01 | ||
| Impeller | See the table | See the table | ||
| O washer46.2X1.8 | 19110-72 | HSB-19110-72 | ||
| Impeller lock ring | HSB-7300239 | |||
| Impeller lock bolt | HSB-7415648 | |||
| Mechanical seal box | 22223-01-30 | HSB-22223-01-30 | ||
| Packing seal | 20614-01-30 | HSB-20614-01-30 | ||
| Mechanical seal box tension bolt | 3861-117 | HSB-3861-117 | ||
| vent M10X1 | 19368-01 | HSB-19368-01 | ||
| Packing sleeve | 20622A | HSB-20622A | ||
| Mechanical seal | 22451-1 | HSB-22451-1 | ||
| Packing 12X12 | 25014-04M-B | HSB-25014-04M-B | ||
| Lbolt | B3701A | HSB-B3701A | ||
| shaft | HSB-20612-02-33-S | |||
| Wearing sleeve（mechanical seal） | 20943-21 | HSB-20943-21 | ||
| Wearing sleeve（packing seal） | 20613-21G-7A | HSB-20613-21G-7A | ||
| Key | 903022 | HSB-4372-5-21 | ||
| O ring 51.5X2.65 | 23444-01-72 | HSB-23444-01-72 | ||
| Water block ring | 22210-1A | HSB-22210-1A | ||
| Bearing frame | 20938-02-01 | HSB-20938-02-01 | ||
| Square block 1/2 | 2412549 | HSB-8505-05 | ||
| Breathing hole | 2325501 | HSB-8267-01 | ||
| Oil cup | B18JB/T9740.3-1995 | |||
| Bolt for pump casing | 2538-1A | HSB-2538-1A | ||
| Inner bearing cover | 20626 | HSB-20626 | ||
| Washer for inner bearing cover | 20625 | HSB-20625 | ||
| Oil seal | 20619-01 | HSB-20619-01 | ||
| Bolt for inner bearing cover | 716243 | HSB-3861-1 | ||
| Nut for inner bearing cover | 742205 | HSB-3932-2 | ||
| Oil mouse M10X1 | 21641-01 | HSB-21641-01 | ||
| Inner bearing NUP313E and oil block ring | N/A | HSB-661009010 | ||
| Axis adjusting sleeve | 20624-01-01 | HSB-20624-01-01 | ||
| O ring 140X3.55 | 7496-253 | HSB-7496-253 | ||
| Axis adjusting sleeve bolt | 3861-138 | HSB-3861-138 | ||
| Nut for axis adjusting sleeve | 3932-62 | HSB-3932-62 | ||
| Outer bearing cover | 20617-01-01 | HSB-20617-01-01 | ||
| Oil mouse M10X1 | HSB-661010020 | |||
| O ring 120X3.55 | 7496-26 | HSB-7496-26 | ||
| Oil seal 47.63X69.85X9.525 | 20619-02 | HSB-20619-02 | ||
| Bolt outer bearing cover | 3861-139 | HSB-3861-139 | ||
| Bearing 7311B/DB | N/A | HSB-648408201S | ||
| Lock washer | 1542877 | HSB-6124-4 | ||
| Lock nut | 1542511 | HSB-6123-4 | ||
| casing | ||||
| Pump casing, 3x2x13 | 19203-01-30A | HSB-19203-01-30A | ||
| Pump casing , 4x3x13 | 19205-01-30A | HSB-19205-01-30A | ||
| Pump casing , 5x4x11 | 19222-01-30A | HSB-19222-01-30A | ||
| Pump casing , 6x5x11 | 19122-01-30A | HSB-19122-01-30A | ||
| Pump casing , 6x5x14 | 19123-01-30A | HSB-19123-01-30A | ||
| Pump casing , 8x6x11 | 19763-01-30A | HSB-19763-01-30A | ||
| Pump casing , 8x6x14 | 19117-01-30A | HSB-19117-01-30A | ||
| Pump casing , 10x8x14 | 20937-01-30A | HSB-20937-01-30A | ||
| Impeller | ||||
| Impeller for 3x2x13 | 19204-XX-30 | HSB-19204-XX-30 | ||
| Impeller for 4x3x13 | 19206-XX-30 | HSB-19206-XX-30 | ||
| Impeller for 5x4x14 | 19224-XX-30 | HSB-19224-XX-30 | ||
| Impeller for 6x5x11 | 19121-XX-30 | HSB-19121-XX-30 | ||
| Impeller for 6x5x14 | 19121-XX-30 | HSB-19121-XX-30 | ||
| Impeller for 8x6x11 | 19121-XX-30 | HSB-19121-XX-30 | ||
| Impeller for 8x6x14 | 19116-XX-30 | HSB-19116-XX-30 | ||
| Impeller for 10x8x14 | 21867-XX-30 | HSB-21867-XX-30 | ||
| HSB-S series structured | ||||
| Part name | Part No | HLY part # | ||
| Pump Casing | See the table | See the table | ||
| Sealing washer | 10399-46-1 | HSB-10399-46-1 | ||
| Tension nut 3/4 | 3932-61 | HSB-3932-61 | ||
| Tension bolt 3/4X85 | 3862-76 | HSB-3862-76 | ||
| Square block 3/8 | 2412519 | HSB-8505-04-01 | ||
| Square block 1/2 | 2412519 | HSB-8505-04-01 | ||
| Impeller | See the table | See the table | ||
| O washer46.2X1.8 | 19110-72 | HSB-19110-72 | ||
| Impeller lock ring | HSB-7300239 | |||
| Impeller lock bolt | HSB-7415648 | |||
| Mechanical seal box | 22223-01-30 | HSB-22223-01-30 | ||
| Packing seal | 20614-01-30 | HSB-20614-01-30 | ||
| Mechanical seal box tension bolt | 3861-117 | HSB-3861-117 | ||
| vent M10X1 | 19368-01 | HSB-19368-01 | ||
| Packing sleeve | 20622A | HSB-20622A | ||
| Mechanical seal | 22451-1 | HSB-22451-1 | ||
| Packing 12X12 | 25014-04M-B | HSB-25014-04M-B | ||
| Lbolt | B3701A | HSB-B3701A | ||
| shaft | HSB-20612-02-33-S | |||
| Wearing sleeve（mechanical seal） | 20943-21 | HSB-20943-21 | ||
| Wearing sleeve（packing seal） | 20613-21G-7A | HSB-20613-21G-7A | ||
| Key | 903022 | HSB-4372-5-21 | ||
| O ring 51.5X2.65 | 23444-01-72 | HSB-23444-01-72 | ||
| Water block ring | 22210-1A | HSB-22210-1A | ||
| Bearing frame | 20938-02-01 | HSB-20938-02-01 | ||
| Square block 1/2 | 2412549 | HSB-8505-05 | ||
| Breathing hole | 2325501 | HSB-8267-01 | ||
| Oil cup | B18JB/T9740.3-1995 | |||
| Bolt for pump casing | 2538-1A | HSB-2538-1A | ||
| Inner bearing cover | 20626 | HSB-20626 | ||
| Washer for inner bearing cover | 20625 | HSB-20625 | ||
| Oil seal | 20619-01 | HSB-20619-01 | ||
| Bolt for inner bearing cover | 716243 | HSB-3861-1 | ||
| Nut for inner bearing cover | 742205 | HSB-3932-2 | ||
| Oil mouse M10X1 | 21641-01 | HSB-21641-01 | ||
| Inner bearing NUP313E and oil block ring | N/A | HSB-661009010 | ||
| Axis adjusting sleeve | 20624-01-01 | HSB-20624-01-01 | ||
| O ring 140X3.55 | 7496-253 | HSB-7496-253 | ||
| Axis adjusting sleeve bolt | 3861-138 | HSB-3861-138 | ||
| Nut for axis adjusting sleeve | 3932-62 | HSB-3932-62 | ||
| Outer bearing cover | 20617-01-01 | HSB-20617-01-01 | ||
| Oil mouse M10X1 | HSB-661010020 | |||
| O ring 120X3.55 | 7496-26 | HSB-7496-26 | ||
| Oil seal 47.63X69.85X9.525 | 20619-02 | HSB-20619-02 | ||
| Bolt outer bearing cover | 3861-139 | HSB-3861-139 | ||
| Bearing 7311B/DB | N/A | HSB-648408201S | ||
| Lock washer | 1542877 | HSB-6124-4 | ||
| Lock nut | 1542511 | HSB-6123-4 | ||
| Casing | ||||
| Pump casing, 3x2x13 | 19203-01-30A | HSB-19203-01-30A | ||
| Pump casing , 4x3x13 | 19205-01-30A | HSB-19205-01-30A | ||
| Pump casing , 5x4x11 | 19222-01-30A | HSB-19222-01-30A | ||
| Pump casing , 6x5x11 | 19122-01-30A | HSB-19122-01-30A | ||
| Pump casing , 6x5x14 | 19123-01-30A | HSB-19123-01-30A | ||
| Pump casing , 8x6x11 | 19763-01-30A | HSB-19763-01-30A | ||
| Pump casing , 8x6x14 | 19117-01-30A | HSB-19117-01-30A | ||
| Pump casing , 10x8x14 | 20937-01-30A | HSB-20937-01-30A | ||
| Impeller | ||||
| Impeller for 3x2x13 | 19204-XX-30 | HSB-19204-XX-30 | ||
| Impeller for 4x3x13 | 19206-XX-30 | HSB-19206-XX-30 | ||
| Impeller for 5x4x14 | 19224-XX-30 | HSB-19224-XX-30 | ||
| Impeller for 6x5x11 | 19121-XX-30 | HSB-19121-XX-30 | ||
| Impeller for 6x5x14 | 19121-XX-30 | HSB-19121-XX-30 | ||
| Impeller for 8x6x11 | 19121-XX-30 | HSB-19121-XX-30 | ||
| Impeller for 8x6x14 | 19116-XX-30 | HSB-19116-XX-30 | ||
| Impeller for 10x8x14 | 21867-XX-30 | HSB-21867-XX-30 | ||
| Part list of hydraulic pressure connecting device | ||||
| Axis adjusting sleeve for hydraulic pressure motor | 22224-01-43 | HSB-22224-01-43 | ||
| Frame for hydraulic pressure motor | 22225-01-01 | HSB-22225-01-01 | ||
| Adjusting disc for hydraulic pressure motor | ||||
| Frame covering board | ||||
| Mounting bolt for covering board | ||||
| Mounting bolt for frame | ||||
| HSB-S Series centrifugal pump | ||||
| Recommended spare parts list for one to three years | ||||
| Part name | Part No | |||
| casing8×6×14 | HSB-19117-01-30A | |||
| casing 8×6×11 | HSB-19763-01-30A | |||
| casing 6×5×14 | HSB-19123-01-30A | |||
| casing 6×5×11 | HSB-19122-01-30A | |||
| casing 5×4×14 | HSB-19222-01-30A | |||
| casing 4×3×13 | HSB-19205-01-30A | |||
| casing 3×2×x13 | HSB-19203-01-30A | |||
| Impeller 8×6 | HSB-19116-xx-30 | |||
| Impeller 6×5 | HSB-19121-xx-30 | |||
| Impeller 5×4 | HSB-19222-xx-30 | |||
| Impeller 4×3 | HSB-19206-xx-30 | |||
| Impeller 3×2 | HSB-19204-xx-30 | |||
| Pump shaft | HSB-20612-02-33 | |||
| Bearing base | HSB-20618-12-1 | |||
| Inner bearing cover | HSB-20626A | |||
| Outer bearing cover | HSB-20617A | |||
| Impeller lock bolt | HSB-7415648 | |||
| Wear sleeve | HSB-20943-04A | |||
| Axial adjustment set | HSB-20624-01-01 | |||
| Mechanical seal box | HSB-22223-01-30 | |||
| Mechanical seal | HSB-22451-1 | |||
| Packing 12×12 | HSB-25014-04M-B | |||
| Stuffing gland | HSB-20622A | |||
| Oil seal 63.5×88.9×9.53 | HSB-20619-01 | |||
| Oil seal 47.6×69.8×10 | HSB-20619-02 | |||
| Inner bearing NUP313E | HSB-250BIS | |||
| Outer bearing 7311B/DB | HSB-250BOB | |||
| Coupling φ47.6×220 | HSB-250CP-01 | |||
| Coupling φ47.6×165 | HSB-250CP-02 | |||
| Coupling rubber 80×200×28 | HSB-250CP-01A | |||
| Coupling rubber 75×145×27 | HSB-250CP-02A | |||
| Specification and weight of HSB Series parts | ||||
| Description | Description | MISSION Part No | HLY Part No # | |
| Casing | Casing | |||
| Gasket, Casing | Gasket | 10399-46-1 | HSB-10399-46-1 | |
| Nut, Casing | Tension nut 3/4 | 3932-61 | HSB-3932-61 | |
| Stud, Casing | Tension nut 3/4X85 | 3862-76 | HSB-3862-76 | |
| Plug, Casing Drain | plug 3/8 | 2412519 | HSB-8505-04-01 | |
| Plug, Flush Line | plug 1/2 | 2412519 | HSB-8505-04-01 | |
| Impeller Hard | Impeller | 见下表 | 见下表 | |
| Seal, Impeller | O ring 46.2X1.8 | 19110-72 | HSB-19110-72 | |
| Washer, Impeller | washer | HSB-7300239 | ||
| Bolt, Impeller Lock | Bolt, Impeller Lock | HSB-7415648 | ||
| Stuffing Box, Mech. Seal | Stuffing Box, Mech. Seal | 22223-01-30 | HSB-22223-01-30 | |
| Stuffing Box, Packed | Stuffing Box, Mech. Seal | 20614-01-30 | HSB-20614-01-30 | |
| Bolt, Stuffing Box | Bolt Stuffing Box, | 3861-117 | HSB-3861-117 | |
| Grease Fitting M10X1 | Grease fittingM10X1 | 19368-01 | HSB-19368-01 | |
| Gland Assy., Packing | Gland Assy., Packing | 20622A | HSB-20622A | |
| Seal, Mechanical | Seal, Mechanical | 22451-1 | HSB-22451-1 | |
| Packing, Shaft | Packing 12X12 | 25014-04M-B | HSB-25014-04M-B | |
| Bolt Assy, Gland | L bolt | B3701A | HSB-B3701A | |
| Shaft | shaft | 20612-02-33 | HSB-20612-02-33 | |
| Sleeve, Shaft (M.S. Pump) | Wearing sleeve（mechanical seal） | 20943-21 | HSB-20943-21 | |
| Sleeve, Shaft (Pack Pump) | Wearing sleeve（packing seal） | 20613-21G-7A | HSB-20613-21G-7A | |
| Key, Shaft | Key | 903022 | HSB-4372-5-21 | |
| Seal, Shaft Sleeve | O ring 51.5X2.65 | 23444-01-72 | HSB-23444-01-72 | |
| Deflector Assembly | deflector | 22210-1A | HSB-22210-1A | |
| Frame, Grease Lubricated | Bearing frame | 20618-12-1 | HSB-20618-12-1 | |
| 2412549 | HSB-8505-05 | |||
| 18471 | HSB-18471 | |||
| Plug, Frame Drain | Plug 1/2 | 2412549 | HSB-8505-05 | |
| Breather | Breather | 2325501 | HSB-8267-01 | |
| A 662014131 | HSB-A662014131 | |||
| Bolt, Casing Jack | Bolt, Casing Jack | 2538-1H | HSB-2538-1H | |
| Cover, Inboard Bearing | Cover, Inboard Bearing | 20626 | HSB-20626 | |
| Gasket, I.B. Bearing Cover | Gasket, I.B. Bearing Cover | 20625 | HSB-20625 | |
| Oil Seal, I.B. Bearing Cover | Oil seal 88.9X63.5X9.525 | 20619-01 | HSB-20619-01 | |
| Bolt, I.B. Bearing Cover | Bolt, I.B. Bearing Cover | 716243 | HSB-3861-1 | |
| Nut, I.B. Brg. Cover | Nut, I.B. Brg. Cover | 742205 | HSB-3932-2 | |
| 20620-01 | HSB-20620-01 | |||
| Grease Fitting M10X1 | Grease Fitting M10X1 | 21641-01 | HSB-21641-01 | |
| Bearing, Inboard &spacer | Inner bearing | N/A | HSB-661009010 | |
| Housing, O.B. Bearing | Axis adjusting sleeve | 20624-01-01 | HSB-20624-01-01 | |
| Seal, O.B. Bearing Housing | Oring 140X3.55 | 7496-253 | HSB-7496-253 | |
| Bolts, O.B. Bearing Housing | Bolt for axis adjusting sleeve | 3861-138 | HSB-3861-138 | |
| Nut, O.B. Bearing Housing Jam | Nut, O.B. Bearing Housing Jam | 3932-62 | HSB-3932-62 | |
| Cover, O.B. Bearing | Outter bearing | 20617-01-01 | HSB-20617-01-01 | |
| Grease Zerk, O.B. Bearing Cvr. | Grease fittingM10X1 | HSB-661010020 | ||
| O-ring, O.B. Bearing Cover | Oring 120X3.55 | 7496-26 | HSB-7496-26 | |
| Oil Seal, O.B. Bearing Cover | Oil seal 47.63X69.85X9.525 | 20619-02 | HSB-20619-02 | |
| Bolt, O.B. Bearing Cover | Bolt, O.B. Bearing Cover | 3861-139 | HSB-3861-139 | |
| Bearing, O.B. (2 Req’d) | Bearing 7311B/DB | N/A | HSB-648408201S | |
| Lock washer | Lock washer | 1542877 | HSB-6124-4 | |
| Casings – Includes Studs, Nuts & Gasket | Locknut, O.B. Bearing | 1542511 | HSB-6123-4 | |
| Casing | ||||
| Casing, 3x2x13 | Casing, 3x2x13 | 19203-01-30A | HSB-19203-01-30A | |
| Casing, 4x3x13 | Casing, 4x3x13 | 19205-01-30A | HSB-19205-01-30A | |
| Casing, 6x5x11 | Casing, 6x5x11 | 19122-01-30A | HSB-19122-01-30A | |
| Casing, 6x5x14 | Casing, 6x5x14 | 19123-01-30A | HSB-19123-01-30A | |
| Casing, 8x6x11 | Casing, 8x6x11 | 19763-01-30A | HSB-19763-01-30A | |
| Casing, 8x6x14 | Casing, 8x6x14 | 19117-01-30A | HSB-19117-01-30A | |
| Casing, 10x8x14 | Casing, 10x8x14 | 20937-01-30A | HSB-20937-01-30A | |
| Impeller | ||||
| Impeller, 3x2x13 | Impeller, 3x2x13 | 19204-XX-30 | HSB-19204-XX-30 | |
| Impeller, 4x3x13 | Impeller, 4x3x13 | 19206-XX-30 | HSB-19206-XX-30 | |
| Impeller, 6x5x11 | Impeller, 6x5x11 | 19121-XX-30 | HSB-19121-XX-30 | |
| Impeller, 6x5x14 | Impeller, 6x5x14 | 19121-A0-30 | HSB-19121-A0-30 | |
| Impeller, 8x6x11 | Impeller, 8x6x11 | 19121-XX-30 | HSB-19121-XX-30 | |
| Impeller, 8x6x14 | Impeller, 8x6x14 | 19116-A0-30 | HSB-19116-A0-30 | |
| Impeller, 10x8x14 | Impeller, 10x8x14 | 21867-A0-30 | HSB-21867-A0-30 |
HSBcentrifugalpumpparts
Posted in InventoryList.