SPARE PARTS MAIN PARTS
A series of fluid end parts could be provided, interchangeable with Mission Magnum I, and 2500 Supreme, halco 2500. The equivalent or same materials are selected to guarantee the unified quality.
| CASINGS ( including studs, nuts and gaskets) | |||||
| Item | Qty | MISSION Part No. | MISSION Processing# | Description | Material |
| 1* | 1 | 19203-01-30A | 641101753 | Casing,3×2×13 | QT600-3 |
| 1* | 1 | 19205-01-30A | 641101902 | Casing,4×3×13 | QT600-3 |
| 1* | 1 | 19122-01-30A | 641101456 | Casing,6×5×11 | QT600-3 |
| 1* | 1 | 19123-01-30A | 641101605 | Casing, 6×5×14 | QT600-3 |
| 1* | 1 | 19763-01-30A | 641102157 | Casing, 8×6×11 | QT600-3 |
| 1* | 1 | 19117-01-30A | 641101308 | Casing,8×6×14 | QT600-3 |
| 1* | 1 | 20937-01-30A | 641102322 | Casing,10×8×14 | QT600-3 |
| IMPELLERS | |||||
| Item | Qty | MISSION Part No. | Description | Material | Remarks |
| 2* | 1 | 19204-XX-30 | Impeller,3×2×13 | QT600-3 | 1. XX-Impeller code-First X equals dia.of impeller in inches minus 4.Therefore 10”=6,9”=5, etc…14”use lettet A; 2. Second X equals frational data in 1/8’s.Therefore 1/8”=1, 1/4”=2 ,etc…Thus a 10.5” impeller is coded as 64, 12” impeller is coded as 80, 13.25” impeller is coded as 92 etc… 3. YYY－the metric diameter of impeller, therefore 12” is coede as 305mm, 11” is coded as 280mm. |
| 2* | 1 | 19206-XX-30 | Impeller,4×3×13 | QT600-3 | |
| 2* | 1 | 19121-XX-30 | Impeller,6×5×11 | QT600-3 | |
| 2* | 1 | 19121-XX-30 | Impeller, 6×5×14 | QT600-3 | |
| 2* | 1 | 19121-XX-30 | Impeller, 8×6×11 | QT600-3 | |
| 2* | 1 | 19116-XX-30 | Impeller,8×6×14 | QT600-3 | |
| 2* | 1 | 21867-XX-30 | Impeller,10×8×14 | QT600-3 | |
| Spare Parts Data sheet | |||||
| Item | Qty | MISSION Part No. | MISSION Processing# | Description | Material |
| 1* | 1 | See below | See below | Casing | QT600-3 |
| 1A | 1 | 10399-46-1 | 648403012 | Gasket,casing | Vellumoid |
| 1B | 12 | 3932-61 | 648402014 | Nut,casing | Stl |
| 1C | 12 | 3862-76 | 648401115 | Stud,casing | Stl |
| 1D | 1 | 8505-04-01 | 86485503 | Plug,Casing Drain | Stl |
| 1E | 1 | 8505-04-01 | 646400507 | Plug,flush line | Stl |
| 2* | 1 | See below | See below | Impeller | QT600-3 |
| 2A | 1 | 19110-72 | 64845082 | Seal,impeller | Viton |
| 2B | 1 | 7300239 | Washer,impeller | Stl | |
| 2C | 1 | 7415648 | Bolt,impeler lock | Stl | |
| 3* | 1 | 22223-01-30 | 641116157 | Stuffing box,mech.seal | QT600-3 |
| 3* | 1 | 20614-01-30 | 643365042 | Stuffing box,packed | QT600-3 |
| 3A | 2 | 3861-117 | 648401016 | Bolt,stuffing box | Stl |
| 3B | 1 | 19368-01 | 601499403 | Grease fitting | Brass |
| 4 | 1 | 20622A | 641103338 | Gland assy,packing | Stl 304 |
| 5A# | 1 | 22451-1 | 648414308 | Seal,mechanical | Tungsten |
| 5A# | 3 | 25014-04M-B | 661007005 | Packing, Shaft | Kevlar |
| 6 | 2 | B3701A | 601102494 | Bolt assy,gland | Stl 304 |
| 7 | 1 | 20612-02-33 | 646490557 | Shaft | 42CrMo |
| 7A | 1 | 20943-21 | 641102182 | Sleeve,shaft,M.S. | 38CrMoAl |
| 7A | 1 | 20613-21G-7A | 641102181 | Sleeve,shaft,Pack | Stl |
| 7B | 1 | 4372-5-21 | 601212392 | Key,shaft | Stl |
| 7C | 1 | 23444-01-72 | 648415156 | Seal,shaft sleeve | Viton |
| 8 | 1 | 22210-1A | 641116108 | Deflector assembly | Composite |
| 9 | 1 | 20618-12-1 | 644302499 | Frame,grease lubricated | Cast iron |
| 9A | 1 | 8505-05 | 601474737 | Plug,oil drain | Stl |
| 9B | 3 | 2538-1H | Bolt,casing jack | stl | |
| 9C | 1 | 8505-05 | 601474737 | Plug, Frame Drain | Stl |
| 10A | 1 | 20626 | 644303109 | Cover,inboard bearing | Iron |
| 10B | 1 | 20625 | 648408706 | Gasket,I.B.Brg.Cover | Vegetable fiber |
| 10C | 1 | 20619-01 | 648408300 | Oil seal, I.B.Brg.Cover | Buna-n |
| 10D | 2 | 3861-1 | 601407505 | Bolt, I.B.Brg.Cover | Stl |
| 10E | 2 | 3932-2 | 601408560 | Nut, I.B.Brg.Cover | Stl |
| 10F | 1 | 21641-01 | 661010033 | Grease fitting | Brass |