| NO | NAM OF GOODS | MODEL/ PART NUMBER | UNIT | QTY |
| 1 | 12-P-160 TRIPLEX MUD PUMP NATIONAL OILWELL | 12-P-160 | ||
| 1.1 | Fluid End Assembly (Section Thru Rod Chamber) 12-P-160 Triplex Piston Pump. Dwg. No: PL 1292000. Rev. U | |||
| 1.1.1 | Piston complete 6 1/4″ | 12180493 | pce | 15 |
| 1.1.2 | Rubber EAS 6 1/4” | 15180284 | pce | 15 |
| 1.1.3 | Liner 6 1/4″ | 5466625HP | pce | 21 |
| 1.2 | Fluid End Assembly (Section Thru Cylinder) 12-P-160 Triplex Piston Pump. Dwg. No: PL 1292000. Rev. U | |||
| 1.2.1 | G2 Valve complete with polyurethane disc | 1560985 | pce | 30 |
| 1.2.2 | Seat, valve. | 1561440 | pce | 20 |
| 1.2.3 | Retainer,seal-fast change screw type. | 1292350 | pce | 4 |
| 1.2.4 | Seal, valve Retainer | 1540127 | pce | 120 |
| 1.2.5 | Cover,valve | 1292352 | pce | 1 |
| 1.3 | Pulsation dampener K-20-5000 | K-20-5000 | ||
| 1.3.1 | Diaphragm for pulsation dampener K-20-5000.(230010) | 1005208 | pce | 2 |
| 1.3.2 | Stabilizer.(230020 OTECO) | 1005213 | pce | 4 |
| 1.3.3 | Stabilizer plate.(230030 OTECO) | 1005214 | pce | 4 |
| 1.3.4 | Screw ( 230040 OTECO ) | 1005215 | pce | 4 |
| 1.3.5 | Lockwasher ( 20050 OTECO ) | 20050 | pce | 4 |
| 1.3.6 | Bottom plate gasket (230080) | 230080 | pce | 4 |
| 1.4 | VALVE POT TOOLS | |||
| 1.4.1 | Puller for valve seat | M-1060 | set | 2 |
| 2 | D2000E DRECO DRAWWORKS SERIAL No: 80013, JOB No: C11891-C11900 | |||
| 2.1 | Wire line turnback roller Oteco G-20 4-1/2” OD x 10″ length w/bearing and shaft (PN 431204) | |||
| 2.1.1 | Wire line turnback roller Oteco G-20 4-1/2” OD x 10″ length w/bearing and shaft (PN 431204) | 431204 | pce | 5 |
| 2.2.2 | Oteco U-Bolt (set of 2) c/w Nut & LW | 421215 | set | 5 |
| 2.2 | Wireline guide | |||
| 2.2.1 | Wire line guide roller with shaff and bearings assembly 5″ OD x 5″ Length, Oteco G-10 УТК | 431111 | pce | 13 |
| 2.3 | Drum Brake Assembly. Drawworks D2000E. Dwg No: 6801-E-240. Rev. | |||
| 2.3.1 | Brake lining with screws and nuts | 50012AA2 | set | 2 |
| 2.3.2 | Pin | 6801C436 | pce | 1 |
| 2.3.3 | Pin | 6801C437 | pce | 1 |
| 2.4 | Brake cooling unit DRECO Model : 9011-E-1 | |||
| 2.4.1 | Descaler pencool-2000 (equal 208 litres/ pail) | 2000-05 | pail | 4 |
| 3 | AR3200CM MECHANIZED ROUGHNECK – VARCO | AR3200-CM | ||
| 3.1 | Jaw Assy. Torque Wrench. Doc. No: 86711 | |||
| 3.1.1 | Die, TW100 Torque Wrench | 81788 | pcs | 48 |
| 4 | Top Driver NOV PS2-500A | |||
| 4.1 | Washpipe complete, HVOF Top drive. Dwg No: 704044-DOS | 704044 | ||
| 4.1.1 | Washpipe packing set (5 rings per set) | 612984-U | set | 4 |
| 4.1.2 | Washpipe assembly HVOF | 654932-A | pce | 2 |
| 4.2 | 7-5/8 REG x 3″ ID Upper IBOP valve assy. Dwg No: 2028503-DOS | 202853 | ||
| 4.2.1 | Repair kit | 2027380-RK | set | 2 |
| 4.2.2 | Body, crossover, 7 5/8 reg box x NC50 pin | 2028042 | pce | 2 |
| 4.3 | NC50 Lower IBOP valve Top drive. Dwg No: 2033292-DOS | 2033292 | ||
| 4.3.1 | Repair kit | 2033238-RK | set | 2 |
| 5 | CENTRIFUGAL MISSION PUMP 1-7/8″ 6x 8R | |||
| 5.1 | Shaft , SUS416 | 601190135 | pce | 4 |
| 5.2 | Packing assy., King type () | 661007009 | sets | 37 |
| 5.3 | Wear plate (3779-01-30) | 601205677 | pce | 9 |
| 6 | VARCO SLIP PS-16 | PS-16 | ||
| 6.1 | Insert set | 2169-16B-32 | set | 4 |
| 6.2 | Insert set | 2168-16B-32 | set | 4 |
| 6.3 | Gland Cartridge kits for air cylinder (2A, Class 1m Bore 6″, Rod 1-3/4″) | RG2AHL0171 | set | 6 |
| 7 | VARCO TUBING SPIDER, BJ-100 CONVERTIBLE TYPE A | BJ-100 | ||
| 7.1 | Inserts 2.7/8” | VBJ24773 | set | 3 |
| 7.2 | Inserts 3.1/2” | VBJ24774 | set | 3 |
| 8 | BRANDT SE-16 Desilter | |||
| 8.1 | Grooved vitaulic clamp w/gasket | 14A | set | 10 |
| 8.2 | Desilter bushing | 26AA | ea | 32 |
| 9 | SHALE SHAKER | |||
| 9.1 | Bolt assy. Sealing-rapid change w/BRT nut | 12048-00 | set | 18 |
| 9.2 | Cross support | 6417-06 | pce | 36 |
| 9.3 | Side support | 6417-01 | pce | 36 |
| 9.4 | Nut | NHHB-50-13 | pce | 144 |
| 9.5 | Hydraulic cylinder | 11293-30 | pce | 1 |
| 9.6 | Hydraulic hand pump | G0001992 | pce | 1 |
| NO | DESCRIPTION | Part number | UNIT | QTY |
| 1 | DRAWWORK 610 – EP. Model: NOV 610-EP (S/N: H3278) | Model: NOV 610-EP S/N: H3278 | ||
| 1.1 | Power Band Brake System Schematic Dwg No: 2302064-DOS | |||
| 1.1.1 | Accumulator 2.5 Gallon | 131357417 | pcs | 2 |
| 1.1.2 | Pump( Heypac GX40, 40:1 Ratio) | 7815320 | pcs | 1 |
| 1.2 | Drum Shaft Assembly. Dwg:703908 -DOS | |||
| 1.2.1 | Hose assembly | 626663 – 32A | pcs | 4 |
| 1.2.2 | Hose assembly | 651333 – A | pcs | 4 |
| 1.3 | Main Drive Clutch Assy. Drawing No: PL 7802537 Rev. A | |||
| 1.3.1 | Disc , 18 GIS Friction | 7802537-1 | pcs | 2 |
| 1.3.2 | Disc , 18 GIT Friction | 7802537-2 | pcs | 2 |
| 2 | Rotary slip | |||
| 2.1 | SDML Rotary slip 3-1/2” x 2-3/8”: 3-1/2” x 2-3/8” SDML Rotary slip c/w inserts | 15524 | pcs | 1 |
| 2.2 | SDML Rotary slip 3-1/2” x 2-7/8”: 3-1/2” x 2-7/8” SDML Rotary slip c/w inserts | 10019705-001 | pcs | 1 |
| 2.3 | SDML Rotary slip 3-1/2”: 3-1/2” SDML Rotary slip c/w inserts | 10019700-001 | pcs | 1 |
| 3 | Wafer Butterfly Valve KEYSTONE, Model F-1, Trim:CEE3, Type: Resilient seated, Pressure rating: 10 barg, End conn: ANSI 150, Cast iron body, seat: Buna N, disc and stem: SS316, (for Marine environment) Manufacturer: Keystone | |||
| 3.1 | Wafer Butterfly valve, size 3”, Operator: Lever | pcs | 10 | |
| 3.2 | Seat 3″ ( Buna N ) | pcs | 10 | |
| 3.3 | Wafer Butterfly valve, size 4”, Operator: Lever | pcs | 10 | |
| 3.4 | Seat 4″ ( Buna N ) | pcs | 10 | |
| 3.5 | Wafer Butterfly valve, size 5”, Operator: Lever | pcs | 10 | |
| 3.6 | Seat 5″ ( Buna N ) | pcs | 10 | |
| 3.7 | Wafer Butterfly valve, size 6”, Operator: Lever | pcs | 6 | |
| 3.8 | Seat 6″ ( Buna N ) | pcs | 6 | |
| 3.9 | Wafer Butterfly valve, size 8”, Operator: Gear | pcs | 5 | |
| 3.10 | Seat 8″ ( Buna N ) | pcs | 5 | |
| 1 | DRAWWORK 610 – EP. Model: NOV 610-EP (S/N: H3278) | Model: NOV 610-EP S/N: H3278 | ||
| 1.1 | Aux. Brake Installation Dwg No:703909 | |||
| 1.1.1 | Hose Assembly | 623051-A | pce | 4 |
| 1.2 | Schematic, Power Band Brake System Dwg No: 2303064 | |||
| 1.2.1 | Strainer, Tank | 4515-0100-00 | pce | 2 |
| 1.2.2 | Filter/Regulator | 7805835 | pce | 2 |
| 1.2.3 | Element, Filter Norgren | 7804370 | pce | 2 |
| 1.2.4 | Element, Filter | 7804858 | pce | 2 |
| 1.3 | Transmission Lubrication Assy Dwg No:M731000351 | |||
| 1.3.1 | Filter flow | 7805231 | pcs | 2 |
| 1.4 | Main Drive Clutch Assy. Drawing No: PL 7802537 Rev. A | |||
| 1.4.1 | Rotorseal assembly, 1/2″ integral | 7802537-5 | pcs | 1 |
| 1.4.2 | Tube, 18 HT Air | 7802537-15 | pcs | 1 |
| 1.4.3 | O ring | 7802537-6 | pcs | 10 |
| 1.5 | Plumbing, Diagram Dwg No: M731000362 | |||
| 1.5.1 | Valve, Quick release 3/8″ | 7500254 | pcs | 2 |
| 1.5.2 | Rotorseal, Type B3 | 6001855 | pcs | 4 |
| 2 | MUD PUMP | Model: SPM THB-550 | ||
| 2.1 | Packing Assy. Drawing No: 2L107468 | |||
| 2.1.1 | Header Ring | P100342HP | pcs | 20 |
| 2.1.2 | Pressure Ring | P100343HP | pcs | 20 |
| 2.1.3 | Wiper Ring | P101883HP | pcs | 20 |
| 2.1.4 | Lantern Ring | 4P100346 | pcs | 10 |
| 2.2 | Valve And Seat Assy. Dwg. No:2A109376PP (Page: 67/85) | |||
| 2.2.1 | Insert, Valve | 2P110357 | pcs | 24 |
| 2.2.2 | Valve Assy | 2A109538PP | pcs | 15 |
| 2.2.3 | Valve seat Assembly | 2A109542 | pcs | 9 |
| 2.3 | Power end Lube Assy Listing TWS 900 Dwg No :2L105879 | |||
| 2.3.1 | Rotary Union | P100064 | pcs | 2 |
| 2.4 | Fluid Cylinder Assy Listing 3 1/2″-4″ Drawing No: 4L104154 | |||
| 2.4.1 | Suction Cover Seal | P108291 | pcs | 15 |
| 2.4.2 | Plunger | 3P100772 | pcs | 2 |
| 3 | P-200 SWIVEL contact : info@geoteksas.lt | Model: P-200 | ||
| 3.1 | General Assembly P-200 Swivel Dwg No: PL 703687 | |||
| 3.1.1 | Wash Pipe Packing Spacer Assy. | 649358-A | set | 2 |
| 4 | POWER SLIPS Model: TF100-S | Model: TF 100-S | ||
| 4.1 | FCI inserts F/2-7/8 Pipe(4/Set) | TF651-3.500X2.875 | Set | 2 |
| 4.2 | FCI inserts F/2-3/8 Pipe(4/Set) | TF651-3.500X2.375 | Set | 2 |
| 4.3 | FCI Inserts F/3-1/2″ PIPE F/MDL ‘F’ Spider (4/Set) | TF650-3.500 | set | 2 |
| 4.4 | Type FCR Slips F/MDL “F” F/2-3/8” to 3-1/2” OD pipe less inserts w/ret. Ring pins | TF600-FCR-3.500 | ea | 1 |
| 5 | 2500 SUPREME PUMPS 3x4x13 | |||
| 5.1 | Seal, Impeller | H19110-72 | ea | 4 |
| 5.2 | Seal, Mechanical | H22451-1A | ea | 2 |
| 5.3 | Packing shaft | 8264-24-OB | ea | 8 |
| 5.4 | Labyrinth Seal, IB Bearing Cover | H2564-4 | ea | 4 |
| 5.5 | Seal, O.B. Bearing Housing | H7496-253 | ea | 4 |
| 5.6 | O-Ring, O.B. Bearing Cover | H7496-26 | ea | 4 |
| 5.7 | Labyrinth Seal, O.B Bearing Cover | H2564-3 | ea | 4 |
| 6 | Mission Magnum I Pumps, Size: 6x5x14 Page: 22/41 | |||
| 6.1 | Seal, Impeller | 19110-72 | ea | 6 |
| 6.2 | Gland Set | 20622A | ea | 8 |
| 6.3 | Packing Set | 25014-04MB | ea | 8 |
| 6.5 | Seal, Outboard Brg. Cover | 7496-26 | ea | 6 |
| 6.6 | Oil Seal, Outboard Brg Cover | 20619-02 | ea | 5 |
| 7 | Manual Rotary Slips SDML | |||
| 7.1 | 3-1/2 X 2-3/8 INS Kit, SDML | 2160-30 | set | 2 |
| 7.2 | 3-1/2 X 2-7/8 INS Kit, SDML | 2161 -30 | set | 4 |
| 7.3 | 3-1/2 Insert Kit, SDM/SDML | 2162-30 | set | 2 |