Oilfieldchain20

Mud pumps Chain
Draw works Chain
Engine Compounds Chain
Transmission drives Chain
Rotary countershafts Chain
Rotary tables Chain
Low and high drum Chain
Tubing Injection Chain
Jacking pump Chain
Drilling rig Chain
Workover rig Chain

TABLE 4. 120-1 THROUGH 120-8, 121-1 THROUGH 121-3 (121 SERIES REPLACES 472 SERIES)

Chain No.	Pitch	Min . Roller Link Inside Width	Roller Dia.	Link Plate		Pin Dia.	Transverse Pitch	Pin					Average Tensile Strength Through-	Average Weight	Riveted	Cottered
	P	W	D	■H	T	d	E	L	L1	L2	L3	^L4	Hardened Pin
	in.	in.	in.	in.	in.	in.	in.	in.	in.	in.	in.	in.	lbf .	lbs ./ft.
120-1 through 120-8
120-1	1.500	1.000	0.875	1.425	0.187	0.437	–	1.955	1.119	1.071	1.119	0.989	45,100	4.14	STD	STD
120-2	1.500	1.000	0.875	1.425	0.187	0.437	1.789	3.767	1.119	1.071	1.119	0.989	90,200	8.27	STD	STD
120-3	1.500	1.000	0.875	1.425	0.187	0.437	1.789	5.556	1.119	1.071	1.119	0.989	135,300	12.10	MTO	STD
120-4	1.500	1.000	0.875	1.425	0.187	0.437	1.789	7.345	1.119	1.071	1.119	0.989	180,400	16.17	MTO	STD
120-5	1.500	1.000	0.875	1.425	0.187	0.437	1.789	9.134	1.119	1.071	1.119	0.989	225,500	20 24	MTO	STD
120-6	1.500	1.000	0.875	1.425	0.187	0.437	1.789	10.923	1.119	1.071	1.119	0.989	270,600	24 20	MTO	STD
120-8	1.500	1.000	0.875	1.425	0.187	0.437	1.789	14.501	1.119	1.071	1.119	0.989	360,800	32 27	MTO	STD

121-1 through 121-3
121-1	1.500	0.750	0.875	1.425	0.187	0.437	–	1.955	–	–	0.994	0.864	45,100	3.30	STD	STD
121-2	1.250	0.755	0.750	1.180	0.156	0.375	1.546	3.274	–	–	0.994	0.864	90,200	6.76	MTO	STD
121-3	1.250	0.755	0.750	1.180	0.156	0.375	1.546	4.820	–	–	0.994	0.864	135,300	10.08	MTO	STD

Dimensions are subject to change . Contact Timken Drives to obtain certified prints for design and construction .

TABLE 3. 80-1 THROUGH 80-8, 100-1 THROUGH 100-8

Chain No.	Pitch	Min . Roller Link Inside Width	Roller Dia.	Link Plate		Pin Dia.	Transverse Pitch	Pin					Average Tensile Strength Through-	Average Weight	Riveted	Cottered
	P	W	D	H	T	d	E	L	L1	L2	L3	^L4	Hardened Pin
	in.	in.	in.	in.	in.	in.	in.	in.	in.	in.	in.	in.	lbf.	lbs ./ft.
80-1 through 80-8
80-1	1.000	0.627	0.625	0.943	0.125	0.313	–	1.283	0.768	0.638	0.857	0.642	21,500	1.87	STD	STD
80-2	1.000	0.627	0.625	0.943	0.125	0.313	1.155	2.439	0.768	0.638	0.857	0.642	43,000	3.74	STD	STD
80-3	1.000	0.627	0.625	0.943	0.125	0.313	1.155	3.594	0.768	0.638	0.857	0.642	64,500	5.60	STD	STD
80-4	1.000	0.627	0.625	0.943	0.125	0.313	1.155	4.749	0.768	0.638	0.857	0.642	86,000	7.44	MTO	STD
80-5	1.000	0.627	0.625	0.943	0.125	0.313	1.155	5.904	0.768	0.638	0.857	0.642	107,500	9.03	MTO	STD
80-6	1.000	0.627	0.625	0.943	0.125	0.313	1.155	7.059	0.768	0.638	0.857	0.642	129,000	10 82	MTO	STD
80-8	1.000	0.627	0.625	0.943	0.125	0.313	1.155	9.369	0.768	0.638	0.857	0.642	172,000	14.43	MTO	STD

100-1 through 100-8

100-1	1.250	0.755	0.750	1.180	0.156	0.375	–	1.595	0.908	0.785	0.912	0.785	33,000	2.80	STD	STD
100-2	1.250	0.755	0.750	1.180	0.156	0.375	1.411	2.981	0.908	0.785	0.912	0.785	66,000	5.60	STD	STD
100-3	1.250	0.755	0.750	1.180	0.156	0.375	1.411	4.392	0.908	0.785	0.912	0.785	99,000	8.47	MTO	STD
100-4	1.250	0.755	0.750	1.180	0.156	0.375	1.411	5.803	0.908	0.785	0.912	0.785	132,000	11.11	MTO	STD
100-5	1.250	0.755	0.750	1.180	0.156	0.375	1.411	7.214	0.908	0.785	0.912	0.785	165,000	13.97	MTO	STD
100-6	1.250	0.755	0.750	1.180	0.156	0.375	1.411	8.625	0.908	0.785	0.912	0.785	198,000	16.72	MTO	STD
100-8	1.250	0.755	0.750	1.180	0.156	0.375	1.411	11.447	0.908	0.785	0.912	0.785	264,000	22 29	MTO	STD

Dimensions are subject to change . Contact Timken Drives to obtain certified prints for design and construction .Oilfield ChainTABLE 1. DRIVES ROLLER CHAIN

Chain No.	Pitch	Min . Roller Link Inside Width	Roller Diameter	Average Weight	Riveted	Cottered
Chain No.	P	W	D	Average Weight	Riveted	Cottered
		in.	in.	lbs.
35	0.375	0.189	0.200	0.141	STD	–
40	0.500	0.313	0.313	0.420	STD	–
50	0.625	0.376	0.400	0.713	STD	–
60	0.750	0.500	0.469	1.067	STD	STD
80	1.000	0.627	0.625	1.868	STD	STD
100	1.250	0.755	0.750	2.801	STD	STD
120	1.500	1.000	0.875	4.135	STD	STD
140	1.750	1.000	1.000	5.136	STD	STD
160	2.000	1.250	1.126	6.603	STD	STD
180	2.250	1.400	1.406	9.100	MTO	STD
200	2.500	1.490	1.562	10.900	MTO	STD
240	3.000	1.864	1.875	16.400	MTO	STD

TABLE 2. DRIVES CHAIN TABLE

Chain Drive	Rig Horsepower
Chain Drive	4000	3000	2000	1500	1000	750	500
	4000	3000	2000	1500	1000	750	500
1. Rotary Table	160-2	160-2	160-2	160-2	140-2	140-2	140-1
1. Rotary Table	160-2	264-1	160-2	140-2	160-1	160-1	120-1
2 . Rotary Countershaft	160-2	160-2	160-2	160-2	140-2	140-2	140-1
2 . Rotary Countershaft	160-2	264-1	160-2	140-2	160-1	160-1	120-1
3. High Drum	240-3	264-3	160-4	160-3	140-3 160-2	160-2 140-2	120-3 140-2
4. Low Drum	240-3	264-3	160-4	160-3	140-3	160-2	120-3
4. Low Drum	240-3	264-3	160-4	160-3	160-2	140-3	140-2
5 . Cat Shaft	160-2	160-2	160-2	160-1	160-1	160-1	140-1
5 . Cat Shaft	160-2	264-1	160-2	140-2	140-2	140-2	120-1
6 Transmission	140-8	160-4	160-4	160-3	160-2	140-2	120-2
6 Transmission	140-8	264-3	160-3	160-3	140-3	140-2	100-3
					120-3		100-3
7. Drawworks Input	140-8	120-8	120-6	120-4	120-4	100-4	100-4
8. Compound	140-8	120-8	120-6	120-4	120-3 120-4	100-4	100-3
9. & 10. Mud Pump Drives	140-8	120-8	120-8	120-6	120-4	100-6	100-4
9. & 10. Mud Pump Drives	140-8	120-8	120-6	120-4	120-3	100-4	100-3

TABLE 5. 140-1 THROUGH 140-8, 160-1 THROUGH 160-8 AND 180-1 THROUGH 180-4

Chain No.	Pitch	Min . Roller Link Inside Width	Roller Dia.	Link Plate		Pin Dia.	Transverse Pitch	Pin					Average Tensile Strength Through-	Average Weight	Riveted	Cottered
	P	W	D	■H	T	d	E	L	L1	^L2	^L3	^L4	Hardened Pin
	in.	in.	in.	in.	in.	in.	in.	in.	in.	in.	in.	in.	lbf .	lbs ./ft.
140-1 through 140-8
140-1	1.750	1.000	1.000	1.663	0.220	0.500	–	2.136	1.253	1.150	1.253	1.068	57,450	5.14	STD	STD
140-2	1.750	1.000	1.000	1.663	0.220	0.500	1.924	4.060	1.253	1.150	1.253	1.068	114,900	10 27	STD	STD
140-3	1.750	1.000	1.000	1.663	0.220	0.500	1.924	5.984	1.253	1.150	1.253	1.068	172,350	15 29	MTO	STD
140-4	1.750	1.000	1.000	1.663	0.220	0.500	1.924	7.908	1.253	1.150	1.253	1.068	229,800	20.46	MTO	STD
140-5	1.750	1.000	1.000	1.663	0.220	0.500	1.924	9.832	1.253	1.150	1.253	1.068	287,250	25 52	MTO	STD
140-6	1.750	1.000	1.000	1.663	0.220	0.500	1.924	11.756	1.253	1.150	1.253	1.068	344,700	30.69	MTO	STD
140-8	1.750	1.000	1.000	1.663	0.220	0.500	1.924	15.604	1.253	1.150	1.253	1.068	459,600	40.92	MTO	STD

160-1 th	ough 161
160-1	2.000	1.250	1.126	1.899	0.252	0.563	–	2.538	1.454	1.370	1.454	1.269	72,800	6.60	STD	STD
160-2	2.000	1.250	1.126	1.899	0.252	0.563	2.305	4.843	1.454	1.370	1.454	1.269	145,600	13 21	STD	STD
160-3	2.000	1.250	1.126	1.899	0.252	0.563	2.305	7.148	1.454	1.370	1.454	1.269	218,400	20.79	MTO	STD
160-4	2.000	1.250	1.126	1.899	0.252	0.563	2.305	9.453	1.454	1.370	1.454	1.269	291,200	27.83	MTO	STD
160-5	2.000	1.250	1.126	1.899	0.252	0.563	2.305	11.758	1.454	1.370	1.454	1.269	364,000	34.76	MTO	STD
160-6	2.000	1.250	1.126	1.899	0.252	0.563	2.305	14.063	1.454	1.370	1.454	1.269	436,800	41.69	MTO	STD
160-8	2.000	1.250	1.126	1.899	0.252	0.563	2.305	18.673	1.454	1.370	1.454	1.269	582,400	55.50	MTO	STD

180-1 through 180-4

180-1	2.250	1.400	1.406	2.132	0.281	0.687	–	2.780	1 561	1 390	1.561	1 390	95,000	9.10	STD	STD
180-2	2.250	1.400	1.406	2.132	0.281	0.687	2.592	5.372	1.561	1.390	1.561	1.390	190,000	18.10	STD	STD
180-3	2.250	1.400	1.406	2.132	0.281	0.687	2.592	7.964	1.561	1.390	1.561	1.390	285,000	27.01	MTO	MTO
180-4	2.250	1.400	1.406	2.132	0.281	0.687	2.592	10.556	1.561	1.390	1.561	1.390	380,000	35.91	MTO	MTO

Dimensions are subject to change . Contact Timken Drives to obtain certified prints for design and construction .

TABLE 6. 200-1 THROUGH 200-4, 264-1 THROUGH 264-4, 240-1 THROUGH 240-4 AND 241-1

Chain No.	Pitch	Min . Roller Link Inside Width	Roller Dia.	Link Plate		Pin Dia.	Transverse Pitch	Pin					Average Tensile Strength Through-	Average Weight	Riveted	Cottered
	P	W	D	■H	T	d	E	L	L1	L2	L3	^L4	Hardened Pin
	in.	in.	in.	in.	in.	in.	in.	in.	in.	in.	in.	in.	lbf.	lbs . /ft .
200-1 through 200-4
200-1	2.500	1.500	1.562	2.312	0.312	0.781	–	3.088	1.889	1.544	1.889	1.544	100,000	10 90	STD	STD
200-2	2.500	1.500	1.562	2.312	0.312	0.781	2.817	5.905	1.889	1.544	1.889	1.544	200,000	21.00	STD	STD
200-3	2.500	1.500	1.562	2.312	0.312	0.781	2.817	8.722	1.889	1.544	1.889	1.544	300,000	31.50	MTO	STD
200-4	2.500	1.500	1.562	2.312	0.312	0.781	2.817	11.539	1.889	1.544	1.889	1.544	400,000	42 10	MTO	MTO
264-1 through 264-4
264-1	2.500	1.490	1.562	2.375	0.375	0.875	–	3.687	2.015	1.672	2.015	1.672	135,000	12 40	STD	STD
264-2	2.500	1.490	1.562	2.375	0.375	0.875	3.083	6.770	2.015	1.672	2.015	1.672	270,000	24.90	STD	STD
264-3	2.500	1.490	1.562	2.375	0.375	0.875	3.083	9.853	2.015	1.672	2.015	1.672	405,000	37.30	MTO	STD
264-4	2.500	1.490	1.562	2.375	0.375	0.875	3.083	12.936	2.015	1.672	2.015	1.672	540,000	49.80	MTO	STD
240-1 through 240-4
240-1	3.000	1.864	1.875	2.812	0.375	0.937	–	3.708	2.212	1.854	2.212	1.854	152,200	16 40	STD	STD
240-2	3.000	1.864	1.875	2.812	0.375	0.937	3.458	7.166	2.212	1.854	2.212	1.854	304,400	32.20	MTO	STD
240-3	3.000	1.864	1.875	2.812	0.375	0.937	3.458	2.780	2.212	1.854	2.212	1.854	456,600	49.40	MTO	STD
240-4	3.000	1.864	1.875	2.812	0.375	0.937	3.458	7.166	2.212	1.854	2.212	1.854	608,800	65.70	MTO	STD

241-1 3.000 1.250 1. 875 2.812 0.375 0.937 – 3.094 – – 1.905 1. 547 152,200 16. 20 MTO MTO

Dimensions are subject to change . Contact Timken Drives to obtain certified prints for design and construction .

TABLE 7. A.P.I. 7F HEAVY-SERIES OIL FIELD ROLLER CHAIN PRODUCTS

Chain No.	Pitch	Min . Roller Link Inside Width	Roller Dia.	Link Plate		Pin. Dia.	Transverse Pitch	Pin			Average Tensile Strength Through- Hardened Pins	Average Weight	Riveted	Cottered
	P	W	D	H	T	d		L L3 L₄			Average Tensile Strength Through- Hardened Pins
in.		in.	in.	in.	in.	in.	in.	in.	in.	in.	lbf.	lbs ./ft.
60HZ-1	0.750	0.500	0.469	0.709	0.125	0.234	1.028	1.140	0.650	0.570	12,500	1.27	STD	MTO
80HZ-1	1.000	0.625	0.625	0.949	0.156	0.312	1.283	1.413	0.839	0.707	21,500	2.24	STD	STD
100HZ-1	1.250	0.750	0.750	1.186	0.187	0.375	1.539	1.725	0.993	0.863	33,000	3.28	STD	STD
120HZ-1	1.500	1.000	0.875	1.425	0.219	0.437	1.925	2.085	1.186	1.043	45,100	4.61	STD	STD
140HZ-1	1.750	1.000	1.000	1.663	0.250	0.500	2.055	2.260	1.313	1.130	57,450	5.80	STD	STD
160HZ-1	2.000	1.250	1.126	1.899	0.283	0.563	2.437	2.673	1.520	1.339	72,800	7.55	STD	STD
180HZ-1	2.250	1.400	1.406	2.132	0.312	0.687	2.716	2.968	1.641	1.484	95,000	10.25	MTO	MTO
264Z-1	2.500	1.490	1.562	2.375	0.375	0.875	3.083	3.344	2.015	1.672	135,000	12 40	MTO	STD
240HZ-1	3.000	1.875	1.875	2.850	0.500	0.937	3.984	4.265	2.453	2.157	217,000	19 57	MTO	MTO

Dimensions are subject to change . Contact Timken Drives to obtain certified prints for design and construction .

COIL TUBING INJECTOR CHAIN TO FIT OEM GRIPPER BLOCKS

Premium oil field chain features include:

All ballized plates .
Wide waisted link plates.
Through-hardened shotpeened pins .
Special hook cotter.
Coated T-pin .

Please call your nearest location for sales and service .
TABLE 9. COIL TUBE CHAIN KITS AVAILABLE

Manufacturer	Coiled Tube Unit Model	Chain Size
National Oilwell	RT10	120-3
National Oilwell	RT20	120-3
National Oilwell	RT30	120-3
National Oilwell	RT3238	120-3
National Oilwell	RT25	120-3
National Oilwell	RT60	160-4
National Oilwell	RT100	160-4
Hydra Rig	HR560/660	180-4
Hydra Rig	HR580/680	200-4
Hydra Rig	HR440	180-3
Hydra Rig	HR480	200-3
Hydra Rig	HR5100	180-6
Hydra Rig	HR635	140-5

TABLE 10. COIL TUBE CHAIN ASSEMBLIES AVAILABLE

Manufacturer	Coiled Tube Unit Model	Chain Size	Strand	Number of Strands Required
Stewart & Stevenson	Short unit	160-1 w/D3	14 pitch	8
Stewart & Stevenson	Long unit	160-1 w/D3	14 pitch	10
Stewart & Stevenson	Short unit	160H-1 w/D3	14 pitch	8
Stewart & Stevenson	Long unit	160H-1 w/D3	14 pitch	10