Description
CANRIG 8050AC TDS PARTS LIST
| Part: AY10011 | ||||
| Description: CYLINDER, HYDRAULIC, GRIPPER, 7.7in BORE | ||||
| Drawing ID: AY10011 Rev No: A | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 588-03-0 | BODY |
| 02 | 1.00 | EA | 588-04-1 | GLAND |
| 03 | 1.00 | EA | 588-04-2 | SPRING RETAINER |
| 04 | 1.00 | EA | 588-04-3 | PISTON |
| 05 | 1.00 | EA | 588-05-1 | MOUNTING ROD |
| 06 | 1.00 | EA | 588-05-2 | ROD |
| 07 | 1.00 | EA | 738-12-0 | VALVE, PO CHECK, ALUMINUM |
| 07A | 0.00 | EA | S01-1121-01N | O-RING |
| 08 | 1.00 | EA | 829-26-0 | HYDR TUBE, 1/2, BUW |
| 09 | 1.00 | EA | H15-090109B-12 | PLUG, SOC HEX, 3/4 ORB |
| 10 | 1.00 | EA | H15-090136-12-08 | REDUCER, MALE 3/4 ORB, FEMALE 1/2 ORB |
| 11 | 1.00 | EA | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB |
| 12 | 1.00 | EA | H15-520220-08-12 | ELL 90°, MALE 1/2 ORFS, MALE 3/4 ORB |
| 13 | 1.00 | EA | H15-520429-08 | TEE, MALE 1/2 ORB BRANCH, MALE 1/2 ORFS |
| 14 | 1.00 | EA | H22-1000-010 | TEST STATION, #4 SAE |
| 15 | 2.00 | EA | M12-1000-010 | GREASE NIPPLE, 1/8 NPT, STRAIGHT |
| 16 | 1.00 | EA | M14-1000-010 | SPRING |
| 17 | 1.00 | EA | S05-1000-030 | PISTON SEAL |
| 18 | 1.00 | EA | S05-1001-010 | GLAND SEAL |
| 19 | 1.00 | EA | S05-1003-010 | SEAL |
| 20 | 1.00 | EA | S04-1002-020 | BRG RING, OUTSIDE |
| 21 | 1.00 | EA | S04-1003-020 | WIPER RING |
| 22 | 1.00 | EA | S04-1006-020 | BEARING RING, INSIDE |
| 23 | 1.00 | EA | S01-1345-01N | O-RING |
| 24 | 1.00 | EA | S01-1367-01N | O-RING |
| 25 | 8.00 | EA | SH-1000NC-0200-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.00 |
| 26 | 2.00 | EA | SH-0500NC-0225-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 2.25 |
| Part: AY10013 | ||||
| Description: GAUGE PANEL ASSY | ||||
| Drawing ID: AY10013 Rev No: B | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 669-22-0-7 | LABELS, LUBE OIL PRESSURE |
| 02 | 1.00 | EA | 669-22-0-9 | LABELS, HYDRAULIC SYSTEM PRESSURE |
| 03 | 1.00 | EA | 669-22-0-11 | LABELS, HYDRAULIC SYSTEM RETURN … |
| 04 | 1.00 | EA | 694-49-0 | GAUGE PANEL, 3 HOLE |
| 05 | 1.00 | EA | N01-1003-010 | GAUGE, PRESSURE, 0 – 3000 PSI, SS |
| 06 | 1.00 | EA | N10185 | GAUGE, PRESSURE, 0 – 300 PSI, SS |
| 07 | 15.00 | EA | BH-6-32-0050-SS | CAPSCR, BUTTON HD SOC, 6-32 UNC x 0.50 |
| 08 | 15.00 | EA | LN-6-32NC-SS | LOCKNUT, # 6-32UNC, STAINLESS |
| 09 | 1.00 | EA | N10098 | GAUGE, PRESSURE, 0 – 1000 PSI, SS |
| Part: AY10016-1 | ||||
| Description: LUBE PUMP ASSY, 2 HP, 575V | ||||
| Drawing ID: AY10016-X Rev No: B | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | E01-1029-010 | MOTOR, AC, 2 HP, 575V, 1750 RPM |
| 02 | 1.00 | EA | H01-1001-010 | LUBE PUMP |
| 03 | 2.00 | EA | M03-1000-020 | COUPLING HALF |
| 04 | 1.00 | EA | M03-1002-020 | COUPLING ELEMENT |
| 05 | 1.00 | EA | M18-1000-010 | BELL HOUSING |
| 06 | 4.00 | EA | HH-0375NC-0100-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8 |
| 07 | 6.00 | EA | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH |
| 08 | 2.00 | EA | HH-0375NC-0125-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.25, GR8, W |
| 09 | 40.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 10 | 4.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| Part: AY10017 | ||||
| Description: LINK TILT ASSY, 1050 | ||||
| Drawing ID: AY10017 Rev No: J | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | F451JSJ9080808-44.79-X-42 | HOSE ASSY, 1/2, SWV STR, 90° SHT, 44.79 |
| 02 | 1.00 | EA | F451JSJS080808-30.8-X-28 | HOSE ASSY, 1/2, SWV STR, SWV STR, 30.8 |
| 03 | 1.00 | EA | F451JSJS080808-28.75-X-26 | HOSE ASSY, 1/2, SWV STR, SWV STR, 28.75 |
| 04 | 2.00 | EA | F451JSJS080808-24.8-X-22 | HOSE ASSY, 1/2, SWV STR, SWV STR, 24.8 |
| 05 | 2.00 | EA | 594-02-7 | LUG, ELEVATOR LINK, 500 TON, 4.70 BORE |
| 06 | 2.00 | EA | DT16242 | PIVOT PIN, LINK TILT |
| 07 | 1.00 | EA | 594-07-0 | MANIFOLD, HYDRAULIC, LINK TILT |
| 09 | 2.00 | EA | DT12642 | CYLINDER, LINK TILT |
| 09A | 0.00 | EA | H10242 | CYLINDER SEAL KIT |
| 09B | 0.00 | EA | H19-1004-010 | CYLINDER ROD EYE |
| 09C | 0.00 | EA | M04-1000-020 | BEARING, PLAIN RADIAL |
| 09D | 0.00 | EA | M11-1022-010 | RETAINING RING, INTERNAL |
| 09E | 0.00 | EA | DT13000 | SEAL KIT INSTRUCTIONS |
| 10 | 1.00 | EA | 689-16-0 | MOUNT, FLOW DIVIDER, LINK TILT |
| 13 | 1.00 | EA | DT14062 | MOUNT, CYL, LINK TILT, 500T |
| 14 | 1.00 | EA | H04-1012-010 | FLOW DIVIDER |
| 15 | 2.00 | EA | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB |
| 16 | 7.00 | EA | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB |
| 17 | 1.00 | EA | H15-520701-08 | ELL 90°, BULKHEAD, MALE 1/2 ORFS |
| 18 | 0.00 | EA | H15-520118-08 | LOCKNUT, BULKHEAD 1/2, 13/16-16UNF |
| 22 | 2.00 | EA | DT16240 | PIVOT PIN BOLT, LINK TILT |
| 25 | 2.00 | EA | SH-0312NC-0500-W | CAPSCR, HEX SOC HD, 5/16-18UNC x 5.00, W |
| 26 | 3.00 | EA | SH-0312NC-0100-W | CAPSCR, HEX SOC HD, 5/16-18UNC x 1.00 |
| 27 | 2.00 | EA | LN-0312NC-GR8 | LOCKNUT, 5/16-18UNC, GR8, STOVER |
| 28 | 2.00 | EA | HSN-0250NC-GR8 | HEX NUT, SLOTTED, 1/4-20UNC |
| 29 | 5.00 | EA | FW-0312-A | WASHER, F, 5/16, PLAIN, TYPE A |
| 31 | 1.00 | EA | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB |
| 32 | 2.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 33 | 4.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 35 | 2.00 | EA | DT14408 | RETAINING NUT WDMT, LINK TILT |
| 36 | 2.00 | EA | M24-3010-010 | COTTER PIN, 3/16 x 3.00 |
| 37 | 2.00 | EA | H15-520320-08 | ELL 45°, MALE 1/2 ORFS, MALE 1/2 ORB |
| 38 | 2.00 | EA | F451JSJ7080808-25.07-X-22 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 25.07 |
| 39 | 3.00 | FT | M10022 | WIRE ROPE, 1/8, STAINLESS, 7 X 19 |
| 40 | 4.00 | EA | M19-3009-010 | FERRULE, 1/8, OVAL, ALUMINIUM |
| 41 | 2.00 | EA | M10241 | FERRULE, 1/8, STOP, ALUMINIUM |
| 42 | 2.00 | EA | M24-3012-010 | COTTER PIN, 1/16 x 1 LG |
| Part: AY10018 | ||||
| Description: LINK SUPPORT ASSY, 500 TON | ||||
| Drawing ID: AY10018 Rev No: B | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 2.00 | EA | 683-14-0 | PISTON, CBAL CYL, 2.50 DIA |
| 02 | 2.00 | EA | 683-15-0 | ROD, CBAL CYL, 1.75 DIA |
| 03 | 2.00 | EA | 683-16-0 | GLAND, CBALANCE CYL |
| 04 | 1.00 | EA | 743-10-0 | LINK SUPPORT |
| 07 | 2.00 | EA | 743-11-0 | LUG, RETAINING, LINK SUPPORT, 500 TON |
| 08 | 2.00 | EA | 743-13-0 | BRG RING,INSIDE WITH WIPER 16.92 DIA |
| 10 | 2.00 | EA | H15-520112-08 | CAP, 1/2 ORFS |
| 11 | 2.00 | EA | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB |
| 12 | 2.00 | EA | M11-1006-010 | RETNG RING, INT |
| 13 | 8.00 | EA | M12-1000-010 | GREASE NIPPLE, 1/8 NPT, STRAIGHT |
| 14 | 2.00 | EA | S01-1141-01N | O-RING |
| 15 | 2.00 | EA | S02-1004-010 | WIPER |
| 16 | 2.00 | EA | S03-1008-010 | POLYPAK |
| 19 | 2.00 | EA | SS-10-24-0038 | SETSCREW, #10-24UNC x 0.38, CUP POINT |
| 21 | 48.00 | IN | M10022 | WIRE ROPE, 1/8, STAINLESS, 7 X 19 |
| 22 | 4.00 | EA | M19-3009-010 | FERRULE, 1/8, OVAL, ALUMINIUM |
| 23 | 2.00 | EA | DT15985 | LOWER PIN, LINK SUPPORT |
| 24 | 2.00 | EA | DT15984 | UPPER PIN, LINK SUPPORT |
| 25 | 4.00 | EA | DT15988 | BOLT, KEEPER HOLE, 1/2-13 X 2 LG, GR8-W |
| 26 | 4.00 | EA | HSN-0500NC-GR5 | HEX NUT, SLOTTED, 1/2-13UNC, GR5 |
| 27 | 4.00 | EA | M10190 | COTTER PIN, 1/8 X 1.25 |
| 28 | 48.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 29 | 4.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| Part: AY10024 | ||||
| Description: BEARING INSTL KIT, RM, 500T | ||||
| Drawing ID: AY10024 Rev No: A | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 742-18-0 | SLEEVE, SEAL/BEARING, RM |
| 02 | 1.00 | EA | 742-19-0 | SPLIT RING |
| 03 | 1.00 | EA | 742-20-0 | RETAINER, SPLIT RING |
| 04 | 1.00 | EA | 742-52-0 | BEARING INNER RACE |
| 05 | 12.00 | EA | H22-1002-010 | TEST STATION, #6 SAE |
| 06 | 1.00 | EA | M01-1036-010 | BEARING, NEEDLE ROLLER |
| 07 | 1.00 | EA | M11-1026-010 | RETAINING RING, INT |
| 08 | 1.00 | EA | M11-1027-010 | RETAINING RING, EXT |
| 09 | 1.00 | EA | S01-1275-01N | O-RING |
| 10 | 1.00 | EA | S01-5074-01N | O-RING |
| 11 | 3.00 | EA | S05-1035-010 | SEAL |
| 12 | 2.00 | EA | SH-0312NC-0100-W | CAPSCR, HEX SOC HD, 5/16-18UNC x 1.00 |
| 13 | 1.00 | EA | H15-090109B-06 | PLUG, SOC HEX, 3/8 ORB |
| Part: AY10031 | ||||
| Description: WASHPIPE ASSY, 3.00 BORE, 5 K WASHPIPE | ||||
| Drawing ID: AY10031 Rev No: A | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 722-10-0 | WASHPIPE, 3.00 BORE, 5000 PSI |
| 02 | 1.00 | EA | R01-1000-010 | HOLDING NUT |
| 03 | 1.00 | EA | R01-1001-010 | HOLDING RING |
| 04 | 1.00 | EA | R01-1002-010 | PACKING, 3 IN |
| 05 | 1.00 | EA | R01-1003-010 | SPACER ASSEMBLY |
| 06 | 1.00 | EA | R01-1003-01A | GREASE NIPPLE |
| 07 | 2.00 | EA | R01-1004-010 | MIDDLE SPACER |
| 08 | 1.00 | EA | R01-1005-010 | PACKING BOX |
| 09 | 1.00 | EA | R01-1005-01A | SOCKET HEAD SCREW |
| 10 | 1.00 | EA | R01-1006-010 | LOWER SPACER |
| 11 | 0.00 | EA | R01-1007-010 | RETAINING RING |
| 12 | 0.00 | EA | S01-1348-01N | O-RING |
| Part: AY10032 | ||||
| Description: SPARK ARRESTOR ASSY | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 37.50 | FT | S07-1001-010 | WEATHERSTRIP |
| 02 | 1.00 | EA | 696-34-0 | SPARK ARRESTOR |
| 03 | 1.00 | EA | P08-1002-010 | BREATHER/DRAIN, 3/8 NPT, MALE |
| 04 | 18.00 | EA | HH-0375NC-0125-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.25, GR8, W |
| 05 | 18.00 | EA | LN-0375NC-GR8 | LOCKNUT, 3/8-16UNC, GR8, STOVER |
| 06 | 18.00 | EA | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH |
| 07 | 1.00 | EA | AY12394 | SPARK ARRESTER DROP SCREEN ASSY, HR |
| Part: AY10094 | ||||
| Description: BACK-UP WRENCH KIT, 500 TON | ||||
| Drawing ID: AY10094 Rev No: B | ||||
| Item | Qty | Units | Part ID | Description |
| 4.00 | EA | DT10905 | SLEEVE, BACK-UP WRENCH MOUNTING | |
| 01 | 1.00 | EA | 829-56-0-500 | MOUNTING BRACKET |
| 02 | 6.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 03 | 4.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 04 | 3.00 | EA | SH-0750NC-0150-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 1.50 |
| 05 | 7.00 | EA | LW-0750-IT | LOCKWASHER, 3/4 INT TOOTH |
| 06 | 4.00 | EA | SH-0750NC-0225-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 2.25 |
| Part: AY10097 | ||||
| Description: LINK TILT KIT, 350/500/650/750 TON | ||||
| Drawing ID: AY10097 | ||||
| Item | Qty | Units | Part ID | |
| 01 | 1.00 | EA | M19-3006-010 | |
| 02 | 36.00 | IN | M21-2000-010 | |
| 03 | 10.00 | EA | SH-0750NC-0200-W | |
| 04 | 10.00 | EA | LW-0750-IT | |
| Part: AY10100 | ||||
| Description: GEARBOX/MOTOR ASSY, HANDLER ROTATE | ||||
| Drawing ID: AY10100 Rev No: A | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 602-40-0 | GASKET, MOTOR/GEARBOX |
| 02 | 1.00 | EA | H02-1003-030 | HYDRAULIC MOTOR |
| 02A | 2.00 | EA | H15-520220-08-10 | ELL 90°, MALE 1/2 ORFS, MALE 5/8 ORB |
| 02B | 2.00 | EA | H15-520112-08 | CAP, 1/2 ORFS |
| 03 | 1.00 | EA | M15-1002-010 | GEARBOX |
| 03B | 0.00 | EA | M15-1002-01C | KIT, BEARING – 301 GEARBOX |
| 03C | 0.00 | EA | M15-1002-01B | GEARBOX SEAL KIT |
| 04 | 2.00 | EA | HH-12MM-35MM-GR8-W | CAPSCR, HEX HD, M12 x 35, GR8.8 |
| 05 | 2.00 | EA | FW-M12-A | WASHER, F, 12MM, DIN 125A, ZINC PLATED |
| 06 | 1.50 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 06 | 2.00 | EA | LW-12MM-ET | LOCKWASHER, 12 MM EXTERNAL TOOTH |
| 07 | 3.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| Part: AY10117 | ||||
| Description: VIEW COVER ASSY, HR GEARCASE | ||||
| Drawing ID: AY10117 Rev No: B | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 911-13-0 | GEARCASE VIEWCOVER |
| 02 | 1.00 | EA | 911-12-0 | VIEWCOVER RETAINER |
| 03 | 1.00 | EA | 911-14-0 | VIEWCOVER GASKET |
| 04 | 8.00 | EA | HH-0375NC-0100-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8 |
| 05 | 8.00 | EA | LW-0375-IT | LOCKWASHER, 3/8 INT TOOTH |
| 06 | 36.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 07 | 4.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| Part: AY10118 | ||||
| Drawing ID: AY10118 Rev No: A | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 4.00 | EA | 914-12-0 | GUIDE BUSHING ROTARY MANIFOLD |
| 02 | 8.00 | EA | 914-13-0 | SCREW, SHOULDER, 7/8-9UNC x 6.03 |
| 03 | 4.00 | EA | 914-14-0 | SCREW, SHOULDER, 7/8-9UNC x 6.77 |
| 04 | 2.00 | EA | 914-15-0 | ROTARY MANIFOLD LIFT PLATE |
| 06 | 12.00 | EA | M14-1013-010 | SPRING, COMPRESSION, 1 ID X 2 OD X 5 L |
| 07 | 6.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 08 | 10.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 09 | 8.00 | EA | HH-1000NC-0150-GR8-W | CAPSCR, HEX HD, 1-8UNC x 1.50, GR8, WIRE |
| 10 | 24.00 | EA | FW-1000-A | WASHER, F, 1, PLAIN, TYPE A |
| 11 | 4.00 | EA | DT15413 | SHIM, 0.060, PLATE, SPRING LIFT |
| Part: AY10119 | ||||
| Description: TORQUE BOOST ASSY, 27T PINION, HT | ||||
| Drawing ID: AY10119 Rev No: D | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | AY 10319 | MOTOR/GEARBOX ASSEMBLY |
| 02 | 1.00 | EA | 602-04-0 | PISTON/JAW CLUTCH, TORQUE BOOST |
| 03 | 1.00 | EA | 602-08 | RETAINER, UPPER SPRING |
| 04 | 1.00 | EA | 602-12-0 | GLAND, TORQUE BOOST |
| 05 | 1.00 | EA | 602-14 | SPLINED SHAFT |
| 06 | 1.00 | EA | 602-19-0 | GEAR, PINION, 27T, TORQUE BOOST |
| 07 | 1.00 | EA | 602-26-0 | SPRING |
| 08 | 1.00 | EA | 602-29-0 | SHAFT, GEAR/JAW CLUTCH, TB |
| 09 | 1.00 | EA | 602-30-0 | FLINGER, LOWER BEARING, TORQUE BOOST |
| 10 | 1.00 | EA | 602-31-0 | SPACER, BEARING/RETAINING RING. |
| 11 | 1.00 | EA | 602-35-0 | BELL HOUSING, TORQUE BOOST |
| 12 | 1.00 | EA | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB |
| 13 | 1.00 | EA | M01-1009-010 | BEARING, SPHERICAL ROLLER |
| 14 | 1.00 | EA | M01-1012-010 | TAPERED ROLLER BEARING |
| 15 | 1.00 | EA | M01-1023-010 | ROLLER BEARINGL |
| 16 | 1.00 | EA | M11-1002-010 | RETAINING RING, EXT |
| 17 | 1.00 | EA | M11-1007-010 | RETAINING RING, EXT |
| 18 | 1.00 | EA | M11-1020-010 | RETAINING RING, INT |
| 19 | 1.00 | EA | M14-1009-010 | SPRING |
| 20 | 1.00 | EA | M17-1002-010 | ROLL PIN, 3/8 x 0.75 |
| 21 | 1.00 | EA | M17-1003-010 | BALL, STEEL, 7/16 |
| 22 | 1.00 | EA | S01-1254-01N | O-RING |
| 23 | 1.00 | EA | S01-1266-01N | O-RING |
| 24 | 2.00 | EA | S05-1009-010 | SEAL |
| 24A | 0.00 | EA | S01-1157-01N | O-RING |
| 25 | 1.00 | EA | S05-1010-010 | SEAL |
| 25A | 0.00 | EA | S01-1159-01N | O-RING |
| 26 | 12.00 | EA | SH-0500NC-0175-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.75 |
| 27 | 1.00 | EA | SS-0625NC-0050 | SETSCREW 5/8-11UNC x 0.50 FLAT POINT |
| 28 | 12.00 | EA | LW-0500-IT | LOCKWASHER, 1/2 INT TOOTH |
| 29 | 40.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 30 | 2.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 31 | 0.00 | EA | S08-1031-010 | SEAL KIT, TORQUE BOOST, UNIVERSAL |
| R01 | 2.00 | EA | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB |
| R02 | 2.00 | EA | H15-520220-08-10 | ELL 90°, MALE 1/2 ORFS, MALE 5/8 ORB |
| R03 | 4.00 | EA | H15-520112-08 | CAP, 1/2 ORFS |
| R04 | 1.00 | EA | H15-520109-08 | PLUG, HEX HD, 1/2 ORFS |
| R05 | 2.00 | EA | H15-520220-04-04 | ELL 90°, MALE 1/4 ORFS, MALE 1/4 ORB |
| R06 | 2.00 | EA | H15-520112-04 | CAP, 1/4 ORFS |
| Part: AY10120 | ||||
| Description: TORQUE BOOST KIT, 27T, HIGH RATIO | ||||
| Drawing ID: AY10120 Rev No: C | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | AY10119 | TORQUE BOOST ASSY, 27T PINION, HT |
| 02 | 1.00 | EA | 602-37-0 | SLEEVE, BELL HOUSING |
| 03 | 1.00 | EA | S01-1267-01N | O-RING |
| 04 | 1.00 | EA | S01-1272-01N | O-RING |
| 05 | 2.00 | EA | SH-1000NC-0175-W | CAPSCR, HEX SOC HD, 1-8UNC x 1.75, WIRED |
| 06 | 2.00 | EA | LW-1000-IT | LOCKWASHER, 1 INT TOOTH |
| 07 | 0.00 | EA | DT12152 | GASKET, COVER PLATE, TORQUE BOOST |
| 08 | 0.00 | EA | DT12151 | PLATE, COVER, TORQUE BOOST |
| 09 | 40.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 10 | 2.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 41 | 12.00 | PAIR | LW-0500-NL | |
| 42 | 1.00 | EA | LW-0375-IT | |
| 43 | 1.00 | EA | LW-12MM-IT | |
| Part: AY10133 | ||||
| Description: ROTARY MANIFOLD ASSY, 500 HT | ||||
| Drawing ID: AY10133 Rev No: D | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | AY10018 | LINK SUPPORT ASSY, 500 TON |
| 02 | 1.00 | EA | AY10100 | GEARBOX/MOTOR ASSEMBLY |
| 03 | 1.00 | EA | 596-07-0 | KEY |
| 04 | 1.00 | EA | 682-28-0 | BRG RING, OUTSIDE |
| 05 | 1.00 | EA | 691-14-0 | SPACER, PINION/MOTOR |
| 06 | 1.00 | EA | 691-15-0 | PINION RETAINER |
| 07 | 1.00 | EA | 742-10-0 | OUTER SLEEVE |
| 08 | 1.00 | EA | 742-11-0 | GUIDE, GEARCASE |
| 09 | 1.00 | EA | DT12159 | INNER SLEEVE |
| 10 | 2.00 | EA | 742-14-0 | BRG RING, OUTSIDE |
| 11 | 1.00 | EA | 742-17-0 | THRUST WASHER |
| 12 | 2.00 | EA | 742-21-0 | PRESSURE PAD |
| 13 | 1.00 | EA | 912-12-0 | MOUNTING PLATE |
| 14 | 1.00 | EA | 921-10-0 | GEAR, HANDLER ROTATE ASSY, 418T |
| 15 | 1.00 | EA | 921-11-0 | GEAR, PINION, 76T |
| 16 | 1.00 | EA | 921-12-0 | GUARD, PINION, HANDLER ROTATE |
| 17 | 1.00 | EA | 921-13-0 | FLANGE, MOUNTING, GEAR, HR |
| 18 | 13.00 | EA | H15-090109B-06 | PLUG, SOC HEX, 3/8 ORB |
| 19 | 14.00 | EA | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB |
| 20 | 13.00 | EA | H15-520112-08 | CAP, 1/2 ORFS |
| 21 | 13.00 | EA | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB |
| 22 | 1.00 | EA | M17-1005-010 | ROLL PIN, 1/2 x 1.75 |
| 23 | 1.00 | EA | M17-1006-010 | ROLL PIN, 1/2 x 1.00 |
| 24 | 1.00 | EA | M17-1007-010 | ROLL PIN, 1/2 x 1.25 |
| 25 | 2.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 26 | 24.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 27 | 13.00 | EA | S01-1111-01VS | O-RING |
| 28 | 2.00 | EA | S01-1279-01N | O-RING |
| 29 | 1.00 | EA | S03-1019-010 | POLYPAK |
| 30 | 14.00 | EA | S05-1033-010 | SEAL |
| 31 | 8.00 | EA | HH-0375NC-0100-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8 |
| 32 | 3.00 | EA | HH-0375NC-0050-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 0.50, GR8, W |
| 33 | 4.00 | EA | SH-0750NC-0175-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 1.75 |
| 34 | 12.00 | EA | SH-0500NC-0300-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 3.00, W |
| 35 | 12.00 | EA | SH-0500NC-0200-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 2.00, W |
| 36 | 12.00 | EA | SH-0500NC-0075-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 0.75 |
| 37 | 1.00 | EA | SH-0375NC-0075-W | CAPSCR, HEX SOC HD, 3/8-16UNC x 0.75 |
| 38 | 1.00 | EA | SH-12MM-35MM-GR10-W | CAPSCR, HEX SOC HD, M12 x 35, GR10.9 |
| 39 | 11.00 | EA | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH |
| 40 | 4.00 | PAIR | LW-0750-NLS | LOCKWASHER, 3/4 NORD-LOCK SMALL |
| Part: AY10167 | ||||
| Description: BRAKE ASSY, 5 CALIPER, GE B20 AC | ||||
| Drawing ID: AY10167 Rev No: E | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 686-32-0 | CALIPER MOUNTING PLATE |
| 02 | 1.00 | EA | 686-11-0 | BRAKE DISC |
| 04A | 2.00 | EA | 686-13-0-005 | SHIM, 0.005, DISC BRAKE |
| 04B | 2.00 | EA | 686-13-0-010 | SHIM, 0.010, DISC BRAKE |
| 04C | 2.00 | EA | 686-13-0-030 | SHIM, 0.030, DISC BRAKE |
| 04D | 2.00 | EA | 686-13-0-050 | SHIM, 0.050, DISC BRAKE |
| 05 | 2.00 | EA | 686-16-0 | BRACKET, DISC LOCKING |
| 05A | 4.00 | EA | HH-0500NC-0100-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.00, GR8, W |
| 05B | 4.00 | EA | LW-0500-NL | LOCKWASHER, 1/2 NORD-LOCK |
| 06 | 2.00 | EA | HH-0500NC-0175-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.75, GR8 |
| 07 | 2.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| 08 | 5.00 | EA | M16-1000-010 | CALIPER, BRAKE |
| 08A | 0.00 | EA | M16-1000-01A | PAD, FRICTION SHOE, DISC BRAKE |
| 08B | 0.00 | EA | M16-1000-01B | SEAL KIT, DISC BRAKE |
| 11 | 4.00 | EA | SH-0750NC-0225-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 2.25 |
| 12 | 8.00 | EA | SH-1000NC-0200-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.00 |
| 18 | 3.00 | EA | M19-5005-010 | EYEBOLT, SHLD TYPE, 1-8UNC x 2 1/2 |
| 19 | 4.00 | EA | H15-520220-04-04 | ELL 90°, MALE 1/4 ORFS, MALE 1/4 ORB |
| 25 | 4.00 | PAIR | LW-0750-NL | LOCKWASHER, 3/4 NORD-LOCK |
| 26 | 8.00 | EA | LW-1000-IT | LOCKWASHER, 1 INT TOOTH |
| 28 | 3.00 | EA | LW-1000-IT | LOCKWASHER, 1 INT TOOTH |
| 29 | 168.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 30 | 26.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 31 | 1.00 | EA | DT11324 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 32 | 1.00 | EA | DT11325 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 33 | 1.00 | EA | DT11326 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 34 | 1.00 | EA | DT11327 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 35 | 1.00 | EA | DT11328 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 36 | 1.00 | EA | DT11329 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 37 | 1.00 | EA | DT11330 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 38 | 7.00 | EA | H15-2000-04-02 | ELL 90°, MALE 1/4 ORFS, MALE 1/8 NPT |
| 39 | 3.00 | EA | H15-2001-04-02 | ADAPTER, MALE 1/4 ORFS, MALE 1/8 NPT |
| 40 | 4.00 | EA | H15-520120-04-04 | CONNECTOR, MALE 1/4 ORFS, MALE 1/4 ORB |
| 41 | 7.00 | EA | H15-090109B-04 | PLUG, SOC HEX, 1/4 ORB |
| Part: AY10183 | ||||
| Description: EXHAUST PLENUM ASSY, B20 AC MOTOR | ||||
| Drawing ID: AY10183 Rev No: H | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | DT10119 | EXHAUST PLENUM |
| 02 | 1.00 | EA | H15-140109E-06 | PLUG, HEX HD, 3/8 NPT |
| 03 | 7.50 | FT | S07-1001-010 | WEATHERSTRIP |
| 04 | 4.00 | PAIR | LW-0500-NL | LOCKWASHER, 1/2 NORD-LOCK |
| 05 | 4.00 | EA | SH-0500NC-0125 | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.25 |
| 06 | 4.00 | EA | FS-0500NC-0400 | CAPSCR, FLAT HD SOC, 1/2-13UNC x 4.00 |
| 07 | 8.00 | EA | FS-0312NC-0063 | CAPSCR, FLAT HD SOC, 5/16-18UNC x 0.63 |
| 08 | 1.00 | EA | AY10489 | HEATER ASSY, PLENUM, GE B20 MOTOR |
| 09 | 3.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 10 | 4.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 11 | 8.00 | EA | SH-0250NC-0100-W | CAPSCR, HEX SOC HD, 1/4-20UNC x 1.00, W |
| 12 | 8.00 | EA | LW-0250-ET | LOCKWASHER, 1/4, EXTERNAL TOOTH |
| 13 | 1.00 | EA | H15-140109P-04 | PLUG, SOC HEX, 1/4 NPT |
| 14 | 1.00 | EA | DT15427 | MODIFICATION, TUBING, GREASE, B20 MOTOR |
| Part: AY10185 | ||||
| Description: MOTOR ASSY, PRELIM, AC, 1150HP | ||||
| Drawing ID: AY10185 Rev No: F | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 685-12-0 | SEAL RING |
| 02 | 1.00 | EA | DT12485 | SEAL HOUSING |
| 04 | 1.00 | EA | DT10022 | DRILLING MOTOR, AC |
| 06 | 1.00 | EA | 685-24-0 | OIL SHIELD |
| 07 | 1.00 | EA | H15-2000-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 NPT |
| 08 | 1.00 | EA | 696-12-0 | ADAPTER MOUNTING PLATE AIR DUC |
| 09 | 4.00 | EA | FS-0500NC-0100 | CAPSCR, FLAT HD SOC, 1/2-13UNC x 1.00 |
| 11 | 1.00 | EA | M11-1025-010 | RETAINING RING, INTERNAL |
| 12 | 3.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 13 | 120.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 14 | 1.00 | EA | S01-1256-01V | O-RING |
| 15 | 2.00 | EA | S05-1017-010 | SEAL |
| 17 | 12.00 | EA | HH-0500NC-0100-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.00, GR8, W |
| 18 | 8.00 | EA | FS-0625NC-0350 | CAPSCR, FLAT HD SOC, 5/8-11UNC x 3.50 |
| 19 | 1.00 | EA | H15-140140-16-08 | BUSH, HEX, MALE 1 NPT, FEM 1/2 NPT |
| 20 | 12.00 | EA | FW-0500-A | WASHER, F, 1/2, PLAIN, TYPE A |
| 21 | 34.50 | IN | S10075 | SEAL |
| 22 | 3.00 | EA | H15-140109P-08 | PLUG, SOC HEX, 1/2 NPT |
| 23 | 1.00 | EA | AY11149-B20 | GREASE TUBE CONFIG, B20 MOTOR |
| R01 | 0.00 | EA | C10125 | ADHESIVE, SILICONE, RTV, HIGH TEMP, RED |
| Part: AY10189 | ||||
| Description: GEARCASE ASSY, 500 TON, 7.12:1 | ||||
| Drawing ID: AY10189 Rev No: E | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 2.00 | EA | 681-25-0 | RETAINER, BEARING |
| 02 | 4.00 | EA | 681-29-0 | KEY, 0.75 DRIVE HUB/SPINDLE |
| 03 | 1.00 | EA | 741-22-0 | GEAR, BULL, 178 TEETH |
| 04 | 1.00 | EA | 741-28-0 | DRIVE HUB |
| 05 | 1.00 | EA | 911-20-0 | GEARCASE |
| 06 | 6.00 | EA | E03-2000-010 | CABLE TIE, 13.4 IN LG, 120 LB |
| 07 | 1.00 | EA | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB |
| 08 | 2.00 | EA | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB |
| 09 | 1.00 | EA | H15-140109P-08 | PLUG, SOC HEX, 1/2 NPT |
| 10 | 2.00 | EA | H15-140109P-12 | PLUG, SOC HEX, 3/4 NPT |
| 11 | 1.00 | EA | DT10240 | DRAIN ASSEMBLY |
| 12 | 1.00 | EA | M10117 | ROLLER BEARING |
| 13 | 2.00 | EA | M11-1028-010 | RETAINING RING, EXT |
| 14 | 1.00 | EA | M10035 | DOWEL PIN |
| 15 | 2.00 | EA | M17-1009-010 | DOWEL PIN, 3/8 x 1.50, GRD & HDNED |
| 16 | 12.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 17 | 240.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 18 | 1.00 | EA | M25-1001-010 | MAGNET, GEARCASE |
| 20 | 16.00 | EA | SH-1000NC-0200-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.00 |
| 21 | 29.00 | EA | SH-0750NC-0200-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 2.00 |
| 22 | 13.00 | EA | SH-0500NC-0150-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.50 |
| 23 | 12.00 | EA | SH-0375NC-0125-W | CAPSCR, HEX SOC HD, 3/8-16UNC x 1.25 |
| 24 | 2.00 | EA | SH-0250NC-0038-W | CAPSCR, HEX SOC HD, 1/4-20UNC x 0.38 |
| 25 | 17.00 | EA | BH-0500NC-0125 | CAPSCR, BUTTON HD SOC, 1/2-13UNC x 1.25 |
| 26 | 16.00 | EA | LW-1000-IT | LOCKWASHER, 1 INT TOOTH |
| 27 | 29.00 | EA | LW-0750-IT | LOCKWASHER, 3/4 INT TOOTH |
| 28 | 65.00 | EA | LW-0500-IT | LOCKWASHER, 1/2 INT TOOTH |
| 29 | 4.00 | EA | LW-0375-IT | LOCKWASHER, 3/8 INT TOOTH |
| 30 | 2.00 | EA | LW-0250-IT | LOCKWASHER, 1/4 INT TOOTH |
| 31 | 1.00 | EA | S01-1229-01N | O-RING |
| 33 | 1.00 | EA | H15-140109E-08 | PLUG, HEX HD, 1/2 NPT |
| 44 | 35.00 | EA | HH-0500NC-0125-GR8 | CAPSCR, HEX HD, 1/2-13UNC x 1.25, GR8 |
| Part: AY10195 | ||||
| Description: MOTOR/MAIN HOUSING KIT, HR | ||||
| AY10195 | ||||
| Item | Qty | Units | Part ID | Description |
| 01A | 4.00 | EA | 685-29-0-003 | SHIM, 0.003, DRILLING MOTOR |
| 01B | 4.00 | EA | 685-29-0-005 | SHIM, 0.005, DRILLING MOTOR |
| 01C | 4.00 | EA | 685-29-0-010 | SHIM, 0.010, DRILLING MOTOR |
| 01D | 4.00 | EA | 685-29-0-015 | SHIM, 0.015, DRILLING MOTOR |
| 01E | 4.00 | EA | 685-29-0-020 | SHIM, 0.020, DRILLING MOTOR |
| 01F | 4.00 | EA | 685-29-0-030 | SHIM, 0.030, DRILLING MOTOR |
| 01G | 4.00 | EA | 685-29-0-050 | SHIM, 0.050, DRILLING MOTOR |
| 01H | 4.00 | EA | 685-29-0-250 | SHIM, 0.250, DRILLING MOTOR |
| 02 | 24.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 03 | 4.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 04 | 3.00 | EA | SB12-1375NC-0400-W | SUPER BOLT, 1 3/8-6UNC x 4.00, SB12 |
| 05 | 1.00 | EA | SB12-1375NC-0300-W | SUPER BOLT, 1 3/8-6UNC x 3.00, SB12 |
| 43A | 2.00 | EA | H15-520320-04 | |
| 44 | 6.00 | EA | H15-520112-08 | |
| 45 | 0.00 | EA | H15-520220-08-10 | |
| 46 | 5.00 | EA | H15-520220-08-08 | |
| 47 | 2.00 | EA | H15-520220-12-12 | |
| 48 | 2.00 | EA | H15-520401-08 | |
| 49 | 3.00 | EA | H15-520429-08 | |
| 50 | 1.00 | EA | F301JSJ9040404-21.28-X-18.5 | |
| 51 | 1.00 | EA | F301JSJ1040404-29.83-X-27.25 | |
| 52 | 1.00 | EA | F301JSJ7040404-46.8-X-44 | |
| 53 | 1.00 | EA | F301JSJS040404-20.64-X-18 | |
| 54 | 2.00 | EA | H15-2000-04-02 | |
| 55 | 1.00 | EA | H15-520401-04 | |
| 56 | 1.00 | EA | H15-2000-04-04 | |
| 57 | 1.00 | EA | H06-1013-010 | |
| 60 | 2.00 | EA | H15-520220-12-10 | |
| 61 | 2.00 | EA | F301JSJ9040404-19.50-X-16.75 | |
| 62 | 1.00 | EA | AY11665 | |
| 63 | 1.00 | EA | F301JSJS080404-10.25-X-7.25 | |
| 64 | 1.00 | EA | F301JSJ5080404-16.00-X-13.00 | |
| Part: AY10199 | ||||
| Description: HOSE ASSY, HYD, TD, 7.12:1 RATIO | ||||
| Drawing ID: AY10199 Rev No: F | ||||
| Item | Qty | Units | Part ID | Description |
| 1.00 | EA | F301JSJ7040404-15.8-X-13 | HOSE ASSY, 1/4, SWV STR, 45° ELL, 15.8 | |
| 01 | 1.00 | EA | F381JS01121212-67.50-X-64 | HOSE ASSY, 3/4, SWV STR, MALE NPT, 67.50 |
| 02 | 1.00 | EA | F381JSJ7121212-49.26-X-46 | HOSE ASSY, 3/4, SWV STR, 45° ELL, 49.26 |
| 03 | 1.00 | EA | F381J701121212-109.51-X-106 | HOSE ASSY,3/4,45DEG ELL, MALE NPT 109.51 |
| 04 | 1.00 | EA | F301JSJS080404-44.61-X-41.75 | HOSE ASSY, 1/4, SWV STR, SWV STR, 44.61 |
| 05 | 1.00 | EA | F301JSJS080404-48.86-X-46 | HOSE ASSY, 1/4, SWV STR, SWV STR, 48.86 |
| 06 | 1.00 | EA | F451JSJ7080808-98.07-X-95 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 98.07 |
| 07 | 1.00 | EA | F451JSJ7080808-103.07-X-101 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 103.07 |
| 08 | 1.00 | EA | F451JSJS080808-31.8-X-29 | HOSE ASSY, 1/2, SWV STR, SWV STR, 31.8 |
| 10 | 1.00 | EA | F301JSJ7040404-15.8-X-13 | HOSE ASSY, 1/4, SWV STR, 45° ELL, 15.8 |
| 11 | 1.00 | EA | F301JSJ7040404-32.8-X-30 | HOSE ASSY, 1/4, SWV STR, 45° ELL, 32.8 |
| 12 | 2.00 | EA | F451JSJS080808-98.3-X-95.5 | HOSE ASSY, 1/2, SWV STR, SWV STR, 98.3 |
| 13 | 1.00 | EA | F451JSJ7080808-91.00-X-88 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 91.00 |
| 14 | 1.00 | EA | F451JSJ7080808-89.07-X-86 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 89.07 |
| 15 | 1.00 | EA | F451JSJ7080808-66.00-X-63 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 66.00 |
| 16 | 1.00 | EA | F451JSJS080808-66.3-X-63.5 | HOSE ASSY, 1/2, SWV STR, SWV STR, 66.3 |
| 17 | 1.00 | EA | F451JSJ7080808-72.82-X-69.75 | HOSE ASSY, 1/2, SWV STR, 45 ELL, 72.82 |
| 18 | 1.00 | EA | F451JSJS080808-91.8-X-89 | HOSE ASSY, 1/2, SWV STR, SWV STR, 91.8 |
| 19 | 1.00 | EA | F451JSJS080808-89.3-X-86.5 | HOSE ASSY, 1/2, SWV STR, SWV STR, 89.3 |
| 20 | 2.00 | EA | F451JSJS080808-25.55-X-22.75 | HOSE ASSY, 1/2, SWV STR, SWV STR, 25.55 |
| 21 | 1.00 | EA | F451JSJS080808-26.8-X-24 | HOSE ASSY, 1/2, SWV STR, SWV STR, 26.8 |
| 22 | 1.00 | EA | F301JSJ5080404-133.29-X-130.25 | HOSE ASSY, 1/4, SWV STR, 90° MED, 130.25 |
| 23 | 1.00 | EA | F301JSJS080404-98.11 -X-95.25 | HOSE ASSY, 1/4, SWV STR, SWV STR, 98.11 |
| 24 | 1.00 | EA | F451JSJ5080808-96.35-X-93.5 | HOSE ASSY, 1/2, SWV STR, 90° MED, 96.35 |
| 25 | 1.00 | EA | F451JSJ1080808-96.85-X-94 | HOSE ASSY, 1/2, SWV STR, 90° LONG, 96.85 |
| 26 | 1.00 | EA | F451JSJS080808-78.8-X-76 | HOSE ASSY, 1/2, SWV STR, SWV STR, 78.8 |
| 27 | 1.00 | EA | F451JSJS080808-80.75-X-78 | HOSE ASSY, 1/2, SWV STR, SWV STR, 80.75 |
| 28 | 1.00 | EA | F451JSJ9080808-26.04-X-23.25 | HOSE ASSY, 1/2, SWV STR, 90° SHT, 26.04 |
| 29 | 1.00 | EA | F451JSJ9080808-27.04-X-24.25 | HOSE ASSY, 1/2, SWV STR, 90° SHT, 27.04 |
| 30 | 1.00 | EA | F451JSJ1080808-40.35-X-37.5 | HOSE ASSY, 1/2, SWV STR, 90° LONG, 40.35 |
| 34 | 1.00 | EA | H15-090136-12-08 | REDUCER, MALE 3/4 ORB, FEMALE 1/2 ORB |
| 35 | 1.00 | EA | H15-1027-010 | QUICK PRESS NIP, 3/4 BDY, FEM 3/4 NPT |
| 36 | 1.00 | EA | H15-1027-01A | CAP, BRASS, QUICK CPLER, 3/4 |
| 37 | 1.00 | EA | H15-1029-010 | QUICK PRESS NUT CPLER, FEM 3/4 NPT |
| 38 | 1.00 | EA | H15-1029-01A | PLUG, BRASS, QUICK CPLER, 3/4 |
| 39 | 2.00 | EA | H15-140338-04-04 | ELL 45°, FEM 1/4 NPT |
| 40 | 6.00 | EA | H15-2001-04-04 | ADAPTER, MALE 1/4 ORFS, MALE 1/4 NPT |
| 41 | 1.00 | EA | H15-2003-08 | ADAPTER, MALE 1/2 JIC, FEM SWV 1/2 ORFS |
| 42 | 0.00 | EA | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB |
| 43 | 25.00 | EA | H15-520320-08 | ELL 45°, MALE 1/2 ORFS, MALE 1/2 ORB |
| Part: AY10319 | ||||
| Description: MOTOR/GEARBOX ASSY, TB, 269 cc | ||||
| Drawing ID: AY10319 Rev No: A | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 602-40-0 | GASKET, MOTOR/GEARBOX |
| 02 | 1.00 | EA | H02-1004-010 | HYDRAULIC MOTOR |
| 03 | 1.00 | EA | M15-1001-010 | GEARBOX, DOUBLE REDUCTION |
| 03A | 0.00 | EA | M15-1001-01C | BEARING KIT – TORQUE BOOST GEARBOX |
| 03B | 0.00 | EA | M15-1001-01B | SEAL KIT – GEARBOX |
| 04 | 2.00 | EA | HH-12MM-35MM-GR8-W | CAPSCR, HEX HD, M12 x 35, GR8.8 |
| 05 | 2.00 | EA | FW-M12-A | WASHER, F, 12MM, DIN 125A, ZINC PLATED |
| 06 | 2.00 | EA | LW-12MM-ET | LOCKWASHER, 12 MM EXTERNAL TOOTH |
| 07 | 30.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 08 | 2.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| Part: AY10392-1 | ||||
| Description: HANDLER LOCK ASSY, LOCKING DOG, NEC/CSA | ||||
| Drawing ID: AY10392X Rev No: D | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 920-10-0 | LOCKING DOG |
| 02 | 1.00 | EA | 920-11-0 | LOCK CYLINDER |
| 03 | 1.00 | EA | 920-12-0 | SPACER |
| 04 | 1.00 | EA | 920-13-0 | BUSHING |
| 05 | 1.00 | EA | 920-16-0 | TRIP ARM |
| 07 | 1.00 | EA | AY10484-1 | SENSOR ASSEMBLY |
| 08 | 2.00 | EA | 1016-100-325 | PIN |
| 09 | 1.00 | EA | H07-1032-010 | CHECK VALVE |
| 10 | 2.00 | EA | H15-140140-08-04 | BUSH, HEX, MALE 1/2 NPT, FEM 1/4 NPT |
| 12 | 1.00 | EA | H15-2000-04-04 | ELL 90°, MALE 1/4 ORFS, MALE 1/4 NPT |
| 13 | 4.00 | EA | M11-1034-010 | RETAINING RING, EXT |
| 14 | 1.00 | EA | M11-1035-010 | RETAINING RING, EXT |
| 15 | 1.00 | EA | M13-1002-010 | SET-SCR BRASS TIP 1/4 NX x 0.50 |
| 16 | 3.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 17 | 3.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 18 | 2.00 | EA | HH-0375NC-0325-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 3.25, GR8, W |
| 19 | 1.00 | EA | HH-0375NF-0100-GR8-W | CAPSCR, HEX HD, 3/8-24UNF x 1.00, GR8, W |
| 22 | 3.00 | EA | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH |
| 24 | 2.00 | EA | HH-0312NC-0125-GR8-W | CAPSCR, HEX HD, 5/16-18UNC x 1.25, GR8,W |
| 25 | 2.00 | EA | FW-0312-A | WASHER, F, 5/16, PLAIN, TYPE A |
| 26 | 1.00 | EA | DT13955 | BRACKET, CHECK VALVE |
| Part: AY10484-1 | ||||
| Description: HANDLER LOCK SENSOR ASSY, NEC/CSA | ||||
| Drawing ID: AY10484-X Rev No: B | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | DT10432 | MOUNTING BRACKET |
| 02 | 1.00 | EA | DT10434 | J-BOX, HANDLER LOCK SENSOR |
| 03 | 2.00 | EA | HH-0375NC-0088-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 0.88, GR8, W |
| 04 | 2.00 | EA | RH-P-8-32-0075-SS | 8-32X3/4in PHILLPS R MACHINE SCREW, SS |
| 05 | 2.00 | EA | FW-0375-A | WASHER, F, 3/8, PLAIN, TYPE A |
| 06 | 2.00 | EA | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH |
| 07 | 1.00 | EA | N10057 | PROXIMITY SENSOR |
| 08 | 1.00 | EA | E16-1016-010 | TERMINAL STRIP, DIRECT MOUNT, 12 POLE |
| 09 | 1.00 | EA | E10380 | STRAIN RELIEF, M16 x 1.5, 5 MM – 10 MM |
| 10 | 1.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 11 | 2.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| Part: AY10489 | ||||
| Description: HEATER ASSY, PLENUM, GE B20 MOTOR | ||||
| Drawing ID: AY10489 Rev No: D | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | E10374 | HEATER |
| 02 | 1.00 | EA | DT10459 | HEATER MOUNT |
| 03 | 1.00 | EA | E10455 | NIP, CLOSE, SCH 40, 1/2 NPT, GALVANIZED |
| 04 | 1.00 | EA | DT10458 | BRACKET, MOUNTING, PLENUM HEATER |
| 05 | 1.00 | EA | E04-2000-010 | STRAIN RELIEF, 1/2 NPT, 0.250 – 0.375 |
| 06 | 8.00 | EA | SH-0250NC-0100-W | CAPSCR, HEX SOC HD, 1/4-20UNC x 1.00, W |
| 07 | 6.00 | EA | HH-6MM-16MM-GR8-W | CAPSCR, HEX HD, M6 x 16, GR8.8, WIRED |
| 08 | 6.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 09 | 4.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 10 | 8.00 | EA | LW-0250-IT | LOCKWASHER, 1/4 INT TOOTH |
| 11 | 8.00 | EA | FW-0250-A | WASHER, F, 1/4, PLAIN, TYPE A |
| 12 | 2.00 | EA | HH-0500NC-0550-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 5.50, GR8, W |
| 12A | 2.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| 13 | 0.00 | EA | LW-0500-ET | LOCKWASHER, 1/2 EXTERNAL TOOTH |
| 14 | 4.00 | EA | FW-0500-A | WASHER, F, 1/2, PLAIN, TYPE A |
| 15 | 1.00 | EA | E08-1034-010 | OUTLET BODY, 2 5/8 OD, (2) 1/2 NPT HUBS |
| Part: AY10860 | ||||
| Description: FRAME, UPPER ASSY, HR, FLEX | ||||
| Drawing ID: AY10860 Rev No: J | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | AY10888 | HYDRAULIC MANIFOLD |
| 03 | 1.00 | EA | AY10962 | MANIFOLD ASSY, ALUM, LUBE SYSTEM |
| 11 | 1.00 | EA | H25-1014-010 | CLAMP, SINGLE, 1 IN DIA |
| 12 | 1.00 | FT | M20-1046-010 | RUBBER CHANNEL 1/4 in |
| 13 | 4.00 | EA | HH-0500NC-0100-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.00, GR8, W |
| 14 | 4.00 | EA | LW-0500-ET | LOCKWASHER, 1/2 EXTERNAL TOOTH |
| 15 | 2.00 | EA | HH-0312NC-0300-GR8-W | CAPSCR, HEX HD, 5/16-18UNC x 3.00, GR8,W |
| 16 | 2.00 | EA | HH-0250NC-0225-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 2.25, GR8, W |
| 18 | 2.00 | EA | LN-0312NC-GR8 | LOCKNUT, 5/16-18UNC, GR8, STOVER |
| 19 | 2.00 | EA | FW-0312-A | WASHER, F, 5/16, PLAIN, TYPE A |
| 20 | 2.00 | EA | FW-0250-A | WASHER, F, 1/4, PLAIN, TYPE A |
| 22 | 4.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 23 | 8.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 27 | 1.00 | EA | AY11619 | KIT, J-BOX VIBRATION |
| REF | 0.00 | EA | DT13844 | MOUNT, MCC J-BOX |
| REF | 0.00 | EA | DT13845 | MOUNT, PLC J-BOX |
| Part: AY10861 | ||||
| Description: FRAME BASE, INSTR ASSY, 500/650/750-AC | ||||
| Drawing ID: AY10861 Rev No: F | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | AY 10013 | GAUGE PANEL ASSY |
| 02 | 1.00 | EA | DT11292-1 | FRAME |
| 03 | 1.00 | EA | H10-1000-010 | ACCUMULATOR, CHARGED TO 1000 PSI |
| 04 | 1.00 | EA | H11-1000-030 | HYDRAULIC OIL FILTER |
| 04A | 0.00 | EA | H11-1000-02A | FILTER ELEMENT |
| 04B | 0.00 | EA | H11-1000-02D | VISUAL INDICATOR, BYPASS |
| 05 | 1.00 | EA | H11-1003-010 | LOW PRESSURE FILTER |
| 05B | 0.00 | EA | H11-1000-01C | VISUAL INDICATOR KIT |
| 06 | 1.00 | EA | N01-1013-010 | GAUGE, DIFFERENTIAL PRESSURE, 0-50 PSI |
| 07 | 4.00 | EA | HH-0375NC-0075-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 0.75, GR8 |
| 08 | 2.00 | EA | HH-0250NC-0063-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 0.63, GR8 |
| 09 | 4.00 | EA | BH-0375NC-0100 | CAPSCR, BUTTON HD SOC, 3/8-16UNC x 1.00 |
| 10 | 8.00 | EA | LN-0375NC-GR8 | LOCKNUT, 3/8-16UNC, GR8, STOVER |
| 11 | 4.00 | EA | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH |
| 12 | 3.00 | EA | HH-0312NC-0075-GR8-W | CAPSCR, HEX HD, 5/16-18UNC x 0.75,GR8, W |
| 13 | 3.00 | EA | LW-0312-ET | LOCKWASHER, 5/16 EXTERNAL TOOTH |
| 14 | 1.00 | EA | DT13844 | MOUNT, MCC J-BOX |
| 15 | 1.00 | EA | DT13845 | MOUNT, PLC J-BOX |
| 16 | 8.00 | EA | SH-0500NC-0075-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 0.75 |
| 17 | 8.00 | EA | LW-0500-IT | LOCKWASHER, 1/2 INT TOOTH |
| 18 | 2.00 | EA | DT12849 | TAP PAD, UPPER FRAME SUPPORT |
| 19 | 8.00 | EA | SH-0500NC-0100-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.00 |
| 20 | 8.00 | EA | FW-0500-A | WASHER, F, 1/2, PLAIN, TYPE A |
| 21 | 3.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 22 | 6.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 5A | 0.00 | EA | H11-1003-01A | FILTER ELEMENT, 25 MICRON |
| Part: AY10887 | ||||
| Description: MANIFOLD ASSY, BLOCK, HYDRAULIC | ||||
| Drawing ID: AY10887 Rev No: 0 | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 9.00 | EA | H10052 | PRESSURE REDUCING VALVE |
| 02 | 6.00 | EA | H10054 | FLOW CONTROL VALVE |
| 03 | 2.00 | EA | H10055 | COUNTERBALANCE VALVE |
| 04 | 5.00 | EA | H10056 | PRESSURE RELIEF VALVE |
| 05 | 1.00 | EA | H10057 | CHECK VALVE |
| 06 | 1.00 | EA | H10143 | MANIFOLD, 13 STATION, ALUMINUM |
| 07 | 1.00 | EA | H10094 | CAVITY PLUG |
| 08 | 3.00 | EA | H10071 | PO CHECK VALVE |
| 09 | 1.00 | EA | H10117 | CHECK VALVE |
| 10 | 20.00 | EA | H22-1000-010 | TEST STATION, #4 SAE |
| Part: AY10888 | ||||
| Description: MANIFOLD, BLOCK, HYD, 24V, LOCK DOG | ||||
| Drawing ID: AY10888 Rev No: D | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | AY10887 | BLOCK MANIFOLD |
| 02 | 4.00 | EA | H10059 | VLV, HYD, DIR, 3 POS, 4 WAY, 24V, D03 |
| 03 | 1.00 | EA | H10142 | VLV, HYD, DIR, 2 POS, 4 WAY, 24V, D03 |
| 04 | 3.00 | EA | H10053 | VLV, HYD, DIR, 3 POS, 4 WAY, 24V, D03 |
| 05 | 3.00 | EA | H12-1010-010 | COVER PLATE D03 |
| 06 | 32.00 | EA | SH-10-24-0200 | CAPSCR, HEX SOC HD, # 10-24UNC x 2.00 |
| 07 | 4.00 | EA | SH-10-24-0350 | CAPSCR, HEX SOC HD, # 10-24UNC x 3.50 |
| 08 | 0.00 | EA | H10151 | SOLENOID |
| 09 | 1.00 | EA | H06-1006-010 | PRESSURE RELIEF VALVE |
| 10 | 1.00 | EA | H10142 | VLV, HYD, DIR, 2 POS, 4 WAY, 24V, D03 |
| 11 | 1.00 | EA | H13-1017-010 | ORIFICE, 1.0mm, PUSH-IN |
| Part: AY10962 | ||||
| Description: MANIFOLD ASSY, ALUM, LUBE SYSTEM | ||||
| Drawing ID: AY10962 Rev No: E | ||||
| Item | Qty | Units | Part ID | Description |
| 02 | 1.00 | EA | 731-44-0 | LUBE OIL MANIFOLD |
| 05 | 1.00 | EA | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB |
| 06 | 1.00 | EA | H15-520220-04-04 | ELL 90°, MALE 1/4 ORFS, MALE 1/4 ORB |
| 07 | 3.00 | EA | H15-520120-04-04 | CONNECTOR, MALE 1/4 ORFS, MALE 1/4 ORB |
| 09 | 3.00 | EA | H13-1013-010 | ORIFICE, 1.5mm, M6 THREAD |
| 10 | 1.00 | EA | DT11431 | ORIFICE, 4 mm |
| 12 | 1.00 | EA | H22-1000-010 | TEST STATION, #4 SAE |
| 14 | 1.00 | EA | H15-520428-04 | TEE, MALE 1/4 ORB RUN, MALE 1/4 ORFS |
| 15 | 3.00 | EA | H15-520112-04 | CAP, 1/4 ORFS |
| 16 | 1.00 | EA | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB |
| 42 | 4.00 | EA | SH-0250NC-0100-W | |
| 43 | 8.00 | EA | FW-0250-A | |
| 44 | 4.00 | EA | LN-0250NC-GR8 | |
| 45 | 3.00 | EA | LW-0625-ET | |
| 46 | 6.00 | EA | FW-0625-A | |
| 47 | 1.00 | EA | 929-10-5 | |
| 48 | 1.00 | EA | DT14525 | |
| 49 | 1.00 | EA | DT14530 | |
| 50 | 2.00 | EA | DT14531 | |
| 51 | 3.00 | EA | HH-0500NC-0100-GR8-W | |
| 52 | 3.00 | EA | LW-0500-ET | |
| Part: AY10965-1 | ||||
| Description: GUARD ASSY, 500-750 TON, AC, 3 IN, 575V | ||||
| Drawing ID: AY10965-1 Rev No: C | ||||
| 01 | 1.00 | EA | DT11507-0 | GUARD |
| 02 | 1.00 | EA | DT11503 | BLOWER FRAME |
| 03 | 0.00 | EA | DT11506 | GUARD SPREADER |
| 04 | 1.00 | EA | DT14084-DS | MUDLINE MOUNT |
| 07 | 1.00 | EA | DT11233 | MUDLINE CLAMP |
| 08 | 1.00 | EA | DT14084-ODS | MUDLINE MOUNT |
| 09 | 1.00 | EA | DT11529 | NAME PLATE |
| 10 | 1.00 | EA | DT11530 | BACKING PLATE |
| 12 | 1.00 | EA | 929-17-0 | LUBE PUMP MOUNT GUARD ASSEMBLY |
| 13 | 2.00 | EA | AY11000 | ACTUATOR ASSY, BRAKE |
| 13A | 4.00 | EA | HH-0250NC-0050-GR8-W | CAPSCR, HEX HD, 1/4-20UNC x 0.50, GR8, W |
| 13B | 4.00 | EA | LW-0250-ET | LOCKWASHER, 1/4, EXTERNAL TOOTH |
| 14 | 2.00 | EA | HH-1000NC-0700-GR8-W | CAPSCR, HEX HD, 1-8UNC x 7.00, GR8, W |
| 15 | 4.00 | EA | LN-1000NC-GR8 | LOCKNUT, 1-8UNC, GR8, STOVER |
| 16 | 2.00 | EA | HH-0500NC-0400-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 4.00, GR8, W |
| 17 | 3.00 | EA | HH-0625NC-0200-GR8-W | CAPSCR, HEX HD, 5/8-11UNC x 2.00, GR8 |
| 18 | 12.00 | EA | LW-0750-ET | LOCKWASHER, 3/4 EXTERNAL TOOTH |
| 19 | 6.00 | EA | SH-0750NC-0150-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 1.50 |
| 20 | 6.00 | EA | SH-0500NC-0125-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.25 |
| 21 | 8.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| 22 | 6.00 | EA | LW-0500-ET | LOCKWASHER, 1/2 EXTERNAL TOOTH |
| 23 | 2.00 | EA | SH-1000NC-0400-W | CAPSCR, HEX SOC HD, 1-8UNC x 4.00, WIRED |
| 24 | 4.00 | EA | LW-1000-ET | LOCKWASHER, 1 EXTERNAL TOOTH |
| 25 | 4.00 | EA | BH-0375NC-0100-SS | CAPSCR, BUTTON HD SOC, 3/8-16UNC x 1.00 |
| 26 | 4.00 | EA | LN-0375NC-SS | LOCKNUT, 3/8-16UNC, SS |
| 27 | 2.00 | EA | LN-0750NC-GR8 | LOCKNUT, 3/4-10UNC, GR8, STOVER |
| 28 | 2.00 | EA | HH-0750NC-0400-GR8-W | CAPSCR, HEX HD, 3/4-10UNC x 4.00, GR8 |
| 32 | 8.00 | EA | SH-0375NC-0100-W | CAPSCR, HEX SOC HD, 3/8-16UNC x 1.00 |
| 33 | 8.00 | EA | LN-0375NC-GR8 | LOCKNUT, 3/8-16UNC, GR8, STOVER |
| 34 | 8.00 | EA | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH |
| 35 | 1.00 | EA | AY10016-1 | LUBE PUMP ASSY, 2 HP, 575V |
| 36 | 4.00 | EA | HH-0312NC-0175-GR8-W | CAPSCR, HEX HD, 5/16-18UNC x 1.75, GR8,W |
| 37 | 4.00 | EA | LN-0312NC-GR8 | LOCKNUT, 5/16-18UNC, GR8, STOVER |
| 38 | 4.00 | EA | LW-0312-ET | LOCKWASHER, 5/16 EXTERNAL TOOTH |
| 39 | 1.00 | EA | DT11759 | DEFLECTOR PLATE, BOTTOM, GUARD |
| 40A | 8.00 | EA | HH-0500NC-0150-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8, W |
| 40B | 8.00 | EA | FW-0500-A | WASHER, F, 1/2, PLAIN, TYPE A |
| 40C | 8.00 | EA | LW-0500-ET | LOCKWASHER, 1/2 EXTERNAL TOOTH |
| 41A | 100.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 41B | 6.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| PART | AY10981 | |||
| Description: BACKPAN ASSY, TD PLC,DUAL | ||||
| Drawing ID: AY10981 Rev No: E | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 909-02-3 | BACKPAN, PLC J-BOX |
| 02 | 4.00 | EA | LN-0312NC-GR8 | LOCKNUT, 5/16-18UNC, GR8, STOVER |
| 03 | 17.00 | IN | E35-3010-010 | WIRE DUCT, PLASTIC, WHITE, 1.5 x 4 |
| 04 | 17.00 | IN | E35-3009-010 | COVER, WIRE DUCT, PLASTIC, WHITE, 1.5 IN |
| 05 | 40.00 | IN | E16-1047-010 | RAIL, TS 35, STEEL, SLOTTED |
| 06 | 2.00 | EA | N21-1000-010 | ADAPTER, REMOTE I/O, FLEX I/O, 24 VDC |
| 07 | 1.00 | EA | N21-3000-010 | INPUT, DIGITAL, 16PT, 24VDC, FLX I/O |
| 08 | 3.00 | EA | N21-3001-010 | OUTPUT, DIGITAL, 8PT, 24VDC, FLEX I/O |
| 09 | 1.00 | EA | N21-3005-010 | INPUT, ANALOG, 4PT, V/I, FLEX I/O |
| 10 | 1.00 | EA | N10007 | INPUT, RTD, 8PT, FLEX I/O |
| 11 | 6.00 | EA | N21-1001-010 | TERMINAL BASE, 52 TERMINAL, SCREW CLAMP |
| 13 | 1.00 | EA | N21-1002-010 | TERMINAL BASE, FLEX I/O FREQUENCY MODULE |
| 14 | 9.00 | EA | E10536 | TERMINAL, GND, DBL, COMBI-FT, 24-12 AWG |
| 15 | 4.00 | EA | E10538 | END PLATE, UDK |
| 16 | 9.00 | EA | E10537 | TERMINAL, DUAL LVL, COMBI-FT, 22-10 AWG |
| 17 | 1.00 | EA | E10928 | JUMPER BARS, 10 POLE, UK 3 N, 5.2 MM |
| 18 | 2.00 | EA | N10074 | SURGE PROTECTION, RTD, 3 WIRE |
| 18A | 20.00 | EA | E10506 | SHIELD BEAD, 43 OHM,FERRITE CORE |
| 19 | 1.00 | EA | AY10906 | 0 DIODE ASSY, 35A, 45V |
| 20 | 1.00 | EA | AY11061 | 0 TERMINAL, RC CIRCUIT, COMBI-FOOT |
| 21 | 1.00 | EA | N10112 | MODULE, FILLER, DUMMY, FLEX |
| R01 | 8.00 | EA | RH-P-10-32-0050-SS | 10-32X1/2in PHILLPS R MACHINE SCREW, SS |
| R02 | 7.00 | EA | PH-P-10-32-0050 | PAN HD, MACH SCR, PHILLIPS #10-32 x 0.50 |
| R03 | 0.00 | EA | EP-1000173 | LOCITE #242, BLUE |
| R04 | 1.00 | EA | E10074 | RESISTOR, 150 OHM, 1/2 W, 5% |