Description
CANRIG 1275C TDS SPARE PARTS
| SUBSECTION 6B: TOP DRIVE | ||||
| Assembly | Description | Drawing | Rev | |
| AY10011 | CYLINDER, HYDRAULIC, GRIPPER, 7.7in BORE | AY10011 | A | |
| AY10013 | GAUGE PANEL ASSY | AY10013 | B | |
| AY10016-1 | LUBE PUMP ASSY, 2 HP, 575V | AY10016-X | A | |
| AY10032 | SPARK ARRESTOR ASSY | AY10032 | A | |
| AY10093 | BACK-UP WRENCH KIT, 650/750 TON | AY10093 | C | |
| AY10097 | LINK TILT KIT, 350/500/650/750 TON | AY10097 | 0 | |
| AY10100 | GEARBOX/MOTOR ASSY, HANDLER ROTATE | AY10100 | A | |
| AY10114 | ROTARY MANIFOLD ASSY, 650/750 TON | AY10114 | E | |
| AY10115 | LINK SUPPORT ASSY, 650/750 TON | AY10115 | B | |
| AY10117 | VIEW COVER ASSY, HR GEARCASE | AY10117 | B | |
| AY10118 | SPRING LIFT ASSY, RM, HR | AY10118 | A | |
| AY10147 | WASHPIPE ASSY, 4.00 BORE, 7.5 KSI | AY10147 | A | |
| AY10153 | LINK TILT ASSY, 650/750 TON | AY10153 | K | |
| AY10167 | BRAKE ASSY, 5 CALIPER, GE B20 AC | AY10167 | E | |
| AY10175 | GEARCASE ASSY, 6.81:1 GEAR RATIO | AY10175 | G | |
| AY10180 | TORQUE BOOST ASSY, 28T PINION | AY10180 | B | |
| AY10182 | TORQUE BOOST KIT, 28T, HIGH RATIO | AY10182 | C | |
| AY10183 | EXHAUST PLENUM ASSY, B20 AC MOTOR | AY10183 | H | |
| AY10185 | MOTOR ASSY, PRELIM, AC, 1150HP | AY10185 | F | |
| AY10195 | MOTOR/MAIN HOUSING KIT, HR | AY10195 | A | |
| AY10199 | HOSE ASSY, HYD, TD, 7.12:1 RATIO | AY10199 | D | |
| AY10250 | BEARING INSTL KIT, RM, 1275 | AY10250 | C | |
| AY10251 | HOUSING & SPINDLE ASSY, 1275 | AY10251 | B | |
| AY10319 | MOTOR/GEARBOX ASSY, TB, 269 cc | AY10319 | A | |
| AY10392-1 | HANDLER LOCK ASSY, LOCKING DOG, NEC/CSA | AY10392-X | D | |
| AY10484-1 | HANDLER LOCK SENSOR ASSY, NEC/CSA | AY10484-X | B | |
| AY10489 | HEATER ASSY, PLENUM, GE B20 MOTOR | AY10489 | D | |
| AY10860 | FRAME, UPPER ASSY, HR, FLEX | AY10860 | J | |
| AY10861 | FRAME BASE, INSTR ASSY, 500/650/750-AC | AY10861 | F | |
| AY10869 | MOTOR ASSY, AC, 1150HP, BRK, 26T | AY10869 | F | |
| AY10887 | MANIFOLD ASSY, BLOCK, HYDRAULIC | AY10887 | 0 | |
| AY10888 | MANIFOLD, BLOCK, HYD, 24V, LOCK DOG | AY10888 | D | |
| AY10928 | POSITIONER ASSY, BUW, 750 T, 43.25 | AY10928 | F | |
| AY10929 | BACK-UP WRENCH ASSY, 750 T, 43.25 STRK | AY10929 | H | |
| AY10962 | MANIFOLD ASSY, ALUM, LUBE SYSTEM | AY10962 | E | |
| AY10965 | GUARD ASSY, 500-750 TON, AC, 4 IN, 575V | AY10965 | H | |
| AY10981 | BACKPAN ASSY, TD PLC, DUAL FLEX | AY10981 | E | |
| AY11000 | ACTUATOR ASSY, BRAKE | AY11000 | 0 | |
| AY11148 | ENCODER ASSY, MODEL HS35F | AY11148 | G | |
| AY11250-750 | KIT, WARNING LABELS, TOP DRIVE, 750 TON | AY11250-750 | A | |
| AY11414-4 | KIT, TOP DRIVE LABELS | AY11414-4 | 0 | |
| AY11497 | BLOWER MOTOR SUPPORT ASSY | AY11497 | A | |
| AY11619 | KIT, J-BOX VIBRATION | AY11619 | B | |
| AY11792 | KIT, RETROFIT, OIL FILL EXTENDER | AY11792 | B | |
| AY12300 | COOLER ASSY, RECOVERY AIR, 750 TON, AC | AY12300 | B | |
| AY12329 | QUILL INSTL KIT, 750 TON, 4 BORE, 7 5/8 | AY12329 | 0 | |
| AY12380-TD | KIT, SENSOR, ECM, TD | AY12380 & -1 | G | |
| AY12382 | RTD ASSY, HYD VLV BANK,EQ COND.MONITOR’G | AY12382 | 0 | |
| AY12412 | BONNET ASSY, SL, 4 IN, 7500 PSI WP | AY12412 | B | |
| AY12413 | CARRIER ASSY, 4 IN, SL | AY12413 | A | |
| AY12414-1 | HIGH VIBRATION MOTOR J-BOX ASSEMBLY | AY12414-1 | B | |
| AY12436 | ELEC LAYOUT,TD,AC,1250/75,DOG,AUX.MTR.JB | AY12436-X | C | |
| AY12689 | DIE BLOCK ASSY, 5.75 – 9.00 | AY12689 | A | |
| AY12947 | FRAME ASSEMBLY, WELDED, BUW, 650/750 TON | AY12947 | A | |
| AY13272 | J-BOX, TD PLC, AC, DUAL FLEX | AY13272 | 0 | |
| AY13396 | TOP DRIVE, 1275AC-681, 4 BORE, 600V, 24V | AY13396 | B | |
| AY13631 | LUBE SYSTEM KIT, SL, ST, AC | AY13631 | A | |
| Part: AY10011 | ||||
| Description: CYLINDER, HYDRAULIC, GRIPPER, 7.7in BORE | ||||
| Drawing ID: AY10011 Rev No: A | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 588-03-0 | BODY |
| 02 | 1.00 | EA | 588-04-1 | GLAND |
| 03 | 1.00 | EA | 588-04-2 | SPRING RETAINER |
| 04 | 1.00 | EA | 588-04-3 | PISTON |
| 05 | 1.00 | EA | 588-05-1 | MOUNTING ROD |
| 06 | 1.00 | EA | 588-05-2 | ROD |
| 07 | 1.00 | EA | 738-12-0 | VALVE, PO CHECK, ALUMINUM |
| 07A | 0.00 | EA | S01-1121-01N | O-RING |
| 08 | 1.00 | EA | 829-26-0 | HYDR TUBE, 1/2, BUW |
| 09 | 1.00 | EA | H15-090109B-12 | PLUG, SOC HEX, 3/4 ORB |
| 10 | 1.00 | EA | H15-090136-12-08 | REDUCER, MALE 3/4 ORB, FEMALE 1/2 ORB |
| 11 | 1.00 | EA | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB |
| 12 | 1.00 | EA | H15-520220-08-12 | ELL 90°, MALE 1/2 ORFS, MALE 3/4 ORB |
| 13 | 1.00 | EA | H15-520429-08 | TEE, MALE 1/2 ORB BRANCH, MALE 1/2 ORFS |
| 14 | 1.00 | EA | H22-1000-010 | TEST STATION, #4 SAE |
| 15 | 2.00 | EA | M12-1000-010 | GREASE NIPPLE, 1/8 NPT, STRAIGHT |
| 16 | 1.00 | EA | M14-1000-010 | SPRING |
| 17 | 1.00 | EA | S05-1000-030 | PISTON SEAL |
| 18 | 1.00 | EA | S05-1001-010 | GLAND SEAL |
| 19 | 1.00 | EA | S05-1003-010 | SEAL |
| 20 | 1.00 | EA | S04-1002-020 | BRG RING, OUTSIDE |
| 21 | 1.00 | EA | S04-1003-020 | WIPER RING |
| 22 | 1.00 | EA | S04-1006-020 | BEARING RING, INSIDE |
| 23 | 1.00 | EA | S01-1345-01N | O-RING |
| 24 | 1.00 | EA | S01-1367-01N | O-RING |
| 25 | 8.00 | EA | SH-1000NC-0200-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.00 |
| 26 | 2.00 | EA | SH-0500NC-0225-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 2.25 |
| Part: AY10013 | ||||
| Description: GAUGE PANEL ASSY | ||||
| Drawing ID: AY10013 Rev No: B | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 669-22-0-7 | LABELS, LUBE OIL PRESSURE |
| 02 | 1.00 | EA | 669-22-0-9 | LABELS, HYDRAULIC SYSTEM PRESSURE |
| 03 | 1.00 | EA | 669-22-0-11 | LABELS, HYDRAULIC SYSTEM RETURN … |
| 04 | 1.00 | EA | 694-49-0 | GAUGE PANEL, 3 HOLE |
| 05 | 1.00 | EA | N01-1003-010 | GAUGE, PRESSURE, 0 – 3000 PSI, SS |
| 06 | 1.00 | EA | N10185 | GAUGE, PRESSURE, 0 – 300 PSI, SS |
| 07 | 15.00 | EA | BH-6-32-0050-SS | CAPSCR, BUTTON HD SOC, 6-32 UNC x 0.50 |
| 08 | 15.00 | EA | LN-6-32NC-SS | LOCKNUT, # 6-32UNC, STAINLESS |
| 09 | 1.00 | EA | N10098 | GAUGE, PRESSURE, 0 – 1000 PSI, SS |
| Part: AY10016-1 | ||||
| Description: LUBE PUMP ASSY, 2 HP, 575V | ||||
| Drawing ID: AY10016-X Rev No: A | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | E01-1029-010 | MOTOR, AC, 2 HP, 575V, 1750 RPM |
| 02 | 1.00 | EA | H01-1001-010 | LUBE PUMP |
| 03 | 2.00 | EA | M03-1000-020 | COUPLING HALF |
| 04 | 1.00 | EA | M03-1002-020 | COUPLING ELEMENT |
| 05 | 1.00 | EA | M18-1000-010 | BELL HOUSING |
| 06 | 4.00 | EA | HH-0375NC-0100-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8 |
| 07 | 6.00 | EA | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH |
| 08 | 2.00 | EA | HH-0375NC-0125-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.25, GR8, W |
| 09 | 40.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 10 | 4.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| Part: AY10032 | ||||
| Description: SPARK ARRESTOR ASSY | ||||
| Drawing ID: AY10032 Rev No: A | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 37.50 | FT | S07-1001-010 | WEATHERSTRIP |
| 02 | 1.00 | EA | 696-34-0 | SPARK ARRESTOR |
| 03 | 1.00 | EA | P08-1002-010 | BREATHER/DRAIN, 3/8 NPT, MALE |
| 04 | 18.00 | EA | HH-0375NC-0125-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.25, GR8, W |
| 05 | 18.00 | EA | LN-0375NC-GR8 | LOCKNUT, 3/8-16UNC, GR8, STOVER |
| 06 | 18.00 | EA | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH |
| 07 | 1.00 | EA | AY12394 | SPARK ARRESTER DROP SCREEN ASSY, HR |
| Part: AY10093 | ||||
| Description: BACK-UP WRENCH KIT, 650/750 TON | ||||
| Drawing ID: AY10093 Rev No: C | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 829-56-0-650 | MOUNTING BRACKET |
| 02 | 6.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 03 | 4.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 04 | 3.00 | EA | SH-0750NC-0150-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 1.50 |
| 05 | 7.00 | EA | LW-0750-IT | LOCKWASHER, 3/4 INT TOOTH |
| 06 | 4.00 | EA | SH-0750NC-0225-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 2.25 |
| Part: AY10097 | ||||
| Description: LINK TILT KIT, 350/500/650/750 TON | ||||
| Drawing ID: AY10097 | ||||
| Item | Qty | Units | Part ID | |
| 01 | 1.00 | EA | M19-3006-010 | |
| 02 | 36.00 | IN | M21-2000-010 | |
| 03 | 10.00 | EA | SH-0750NC-0200-W | |
| 04 | 10.00 | EA | LW-0750-IT | |
| Part: AY10100 | ||||
| Description: GEARBOX/MOTOR ASSY, HANDLER ROTATE | ||||
| Drawing ID: AY10100 Rev No: A | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 602-40-0 | GASKET, MOTOR/GEARBOX |
| 02 | 1.00 | EA | H02-1003-030 | HYDRAULIC MOTOR |
| 02A | 2.00 | EA | H15-520220-08-10 | ELL 90°, MALE 1/2 ORFS, MALE 5/8 ORB |
| 02B | 2.00 | EA | H15-520112-08 | CAP, 1/2 ORFS |
| 03 | 1.00 | EA | M15-1002-010 | GEARBOX |
| 03B | 0.00 | EA | M15-1002-01C | KIT, BEARING – 301 GEARBOX |
| 03C | 0.00 | EA | M15-1002-01B | GEARBOX SEAL KIT |
| 04 | 2.00 | EA | HH-12MM-35MM-GR8-W | CAPSCR, HEX HD, M12 x 35, GR8.8 |
| 05 | 2.00 | EA | FW-M12-A | WASHER, F, 12MM, DIN 125A, ZINC PLATED |
| 06 | 2.00 | EA | LW-12MM-ET | LOCKWASHER, 12 MM EXTERNAL TOOTH |
| 06 | 1.50 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 07 | 3.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 41 | 12.00 | PAIR | LW-0500-NL | |
| 42 | 1.00 | EA | LW-0375-IT | |
| 43 | 1.00 | EA | LW-12MM-IT | |
| Part: AY10114 | ||||
| Description: ROTARY MANIFOLD ASSY, 650/750 TON | ||||
| Drawing ID: AY10114 Rev No: E | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | AY10100 | GEARBOX/MOTOR ASSEMBLY |
| 02 | 1.00 | EA | AY10115 | LINK SUPPORT ASSY, 650/750 TON |
| 03 | 1.00 | EA | 596-07-0 | KEY |
| 04 | 1.00 | EA | 682-28-0 | BRG RING, OUTSIDE |
| 05 | 1.00 | EA | 691-14-0 | SPACER, PINION/MOTOR |
| 06 | 1.00 | EA | 691-15-0 | PINION RETAINER |
| 07 | 1.00 | EA | 742-11-0 | GUIDE, GEARCASE |
| 08 | 1.00 | EA | DT12159 | INNER SLEEVE |
| 09 | 2.00 | EA | 742-14-0 | BRG RING, OUTSIDE |
| 10 | 1.00 | EA | 912-10-0 | SLEEVE, OUTER, 650T |
| 11 | 1.00 | EA | 912-12-0 | MOUNTING PLATE |
| 12 | 2.00 | EA | 912-16-0 | PAD, PRESSURE, 650 TON |
| 13 | 1.00 | EA | 912-17-0 | THRUST WASHER ROTARY MANIFOLD |
| 14 | 1.00 | EA | 921-11-0 | GEAR, PINION, 76T |
| 15 | 1.00 | EA | 921-12-0 | GUARD, PINION, HANDLER ROTATE |
| 16 | 1.00 | EA | 921-13-0 | FLANGE, MOUNTING, GEAR, HR |
| 17 | 1.00 | EA | 921-14-0 | GEAR, HANDLER ROTATE ASSY, 418T |
| 18 | 13.00 | EA | H15-090109B-06 | PLUG, SOC HEX, 3/8 ORB |
| 19 | 14.00 | EA | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB |
| 20 | 13.00 | EA | H15-520112-08 | CAP, 1/2 ORFS |
| 21 | 13.00 | EA | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB |
| 22 | 1.00 | EA | M17-1005-010 | ROLL PIN, 1/2 x 1.75 |
| 23 | 1.00 | EA | M17-1006-010 | ROLL PIN, 1/2 x 1.00 |
| 24 | 1.00 | EA | M17-1007-010 | ROLL PIN, 1/2 x 1.25 |
| 25 | 4.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 26 | 24.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 27 | 13.00 | EA | S01-1111-01VS | O-RING |
| 28 | 2.00 | EA | S01-1279-01N | O-RING |
| 29 | 1.00 | EA | S03-1019-010 | POLYPAK |
| 30 | 14.00 | EA | S05-1033-010 | SEAL |
| 31 | 8.00 | EA | HH-0375NC-0100-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8 |
| 32 | 3.00 | EA | HH-0375NC-0050-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 0.50, GR8, W |
| 33 | 4.00 | EA | SH-0750NC-0175-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 1.75 |
| 34 | 12.00 | EA | SH-0500NC-0300-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 3.00, W |
| 35 | 12.00 | EA | SH-0500NC-0200-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 2.00, W |
| 36 | 12.00 | EA | SH-0500NC-0075-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 0.75 |
| 37 | 1.00 | EA | SH-0375NC-0075-W | CAPSCR, HEX SOC HD, 3/8-16UNC x 0.75 |
| 38 | 1.00 | EA | SH-12MM-40MM-GR10-W | CAPSCR, HEX SOC HD, M12 x 40, GR10.9 |
| 39 | 11.00 | EA | LW-0375-ET | LOCKWASHER, 3/8 EXTERNAL TOOTH |
| 40 | 4.00 | EA | LW-0750-IT | LOCKWASHER, 3/4 INT TOOTH |
| Part: AY10115 | ||||
| Description: LINK SUPPORT ASSY, 650/750 TON | ||||
| Drawing ID: AY10115 Rev No: B | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 2.00 | EA | 683-14-0 | PISTON, CBAL CYL, 2.50 DIA |
| 02 | 2.00 | EA | 683-15-0 | ROD, CBAL CYL, 1.75 DIA |
| 03 | 2.00 | EA | 683-16-0 | GLAND, CBALANCE CYL |
| 06 | 1.00 | EA | 913-10-0 | LINK SUPPORT, 650/750 TON |
| 07 | 2.00 | EA | 913-11-0 | LUG, RETAINING, LINK SUPPORT, 650 TON |
| 08 | 2.00 | EA | 913-12-0 | BRG RING, INSIDE, LINK SUPPORT |
| 09 | 2.00 | EA | H15-520112-08 | CAP, 1/2 ORFS |
| 10 | 2.00 | EA | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB |
| 11 | 2.00 | EA | M11-1006-010 | RETNG RING, INT |
| 12 | 8.00 | EA | M12-1000-010 | GREASE NIPPLE, 1/8 NPT, STRAIGHT |
| 13 | 2.00 | EA | S01-1141-01N | O-RING |
| 14 | 2.00 | EA | S02-1004-010 | WIPER |
| 15 | 2.00 | EA | S03-1008-010 | POLYPAK |
| 18 | 2.00 | EA | SS-10-24-0038 | SETSCREW, #10-24UNC x 0.38, CUP POINT |
| 21 | 48.00 | EA | M10022 | WIRE ROPE, 1/8, STAINLESS, 7 X 19 |
| 22 | 4.00 | EA | M19-3009-010 | FERRULE, 1/8, OVAL, ALUMINIUM |
| 23 | 2.00 | EA | DT15985 | LOWER PIN, LINK SUPPORT |
| 24 | 2.00 | EA | DT15984 | UPPER PIN, LINK SUPPORT |
| 25 | 4.00 | EA | DT15988 | BOLT, KEEPER HOLE, 1/2-13 X 2 LG, GR8-W |
| 26 | 4.00 | EA | HSN-0500NC-GR5 | HEX NUT, SLOTTED, 1/2-13UNC, GR5 |
| 27 | 4.00 | EA | M10190 | COTTER PIN, 1/8 X 1.25 |
| 28 | 48.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 29 | 4.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| Part: AY10117 | ||||
| Description: VIEW COVER ASSY, HR GEARCASE | ||||
| Drawing ID: AY10117 Rev No: B | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 911-13-0 | GEARCASE VIEWCOVER |
| 02 | 1.00 | EA | 911-12-0 | VIEWCOVER RETAINER |
| 03 | 1.00 | EA | 911-14-0 | VIEWCOVER GASKET |
| 04 | 8.00 | EA | HH-0375NC-0100-GR8-W | CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8 |
| 05 | 8.00 | EA | LW-0375-IT | LOCKWASHER, 3/8 INT TOOTH |
| 06 | 36.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 07 | 4.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| Part: AY10118 | ||||
| Description: SPRING LIFT ASSY, RM, HR | ||||
| Drawing ID: AY10118 Rev No: A | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 4.00 | EA | 914-12-0 | GUIDE BUSHING ROTARY MANIFOLD |
| 02 | 8.00 | EA | 914-13-0 | SCREW, SHOULDER, 7/8-9UNC x 6.03 |
| 03 | 4.00 | EA | 914-14-0 | SCREW, SHOULDER, 7/8-9UNC x 6.77 |
| 04 | 2.00 | EA | 914-15-0 | ROTARY MANIFOLD LIFT PLATE |
| 06 | 12.00 | EA | M14-1013-010 | SPRING, COMPRESSION, 1 ID X 2 OD X 5 L |
| 07 | 6.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 08 | 10.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 09 | 8.00 | EA | HH-1000NC-0150-GR8-W | CAPSCR, HEX HD, 1-8UNC x 1.50, GR8, WIRE |
| 10 | 24.00 | EA | FW-1000-A | WASHER, F, 1, PLAIN, TYPE A |
| 11 | 4.00 | EA | DT15413 | SHIM, 0.060, PLATE, SPRING LIFT |
| Part: AY10147 | ||||
| Description: WASHPIPE ASSY, 4.00 BORE, 7.5 KSI | ||||
| Drawing ID: AY10147 Rev No: A | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 325-14-0 | WASHPIPE, 4 BORE, 7500 PSI |
| 02 | 1.00 | EA | R01-3007-010 | HOLDING NUT |
| 03 | 1.00 | EA | R01-3008-010 | HOLDING RING |
| 04 | 1.00 | EA | R01-3003-010 | WASHPIPE PACKING |
| 05 | 1.00 | EA | R01-3002-010 | SPACER ASSEMBLY |
| 06 | 1.00 | EA | R01-1003-01A | GREASE NIPPLE |
| 07 | 2.00 | EA | R01-3006-010 | MIDDLE SPACER |
| 08 | 1.00 | EA | R01-3001-010 | PACKING BOX |
| 09 | 1.00 | EA | R01-3016-010 | SCREW, RETAINING, 4 IN PACKING ASSY |
| 10 | 1.00 | EA | R01-3005-010 | LOWER SPACER |
| 11 | 0.00 | EA | R01-3009-010 | RETAINING RING |
| 12 | 2.00 | EA | S01-1359-01N | O-RING |
| Part: AY10153 | ||||
| Description: LINK TILT ASSY, 650/750 TON | ||||
| Drawing ID: AY10153 Rev No: K | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | F451JSJ9080808-44.79-X-42 | HOSE ASSY, 1/2, SWV STR, 90° SHT, 44.79 |
| 02 | 1.00 | EA | F451JSJS080808-30.8-X-28 | HOSE ASSY, 1/2, SWV STR, SWV STR, 30.8 |
| 03 | 1.00 | EA | F451JSJS080808-28.75-X-26 | HOSE ASSY, 1/2, SWV STR, SWV STR, 28.75 |
| 04 | 2.00 | EA | F451JSJS080808-24.8-X-22 | HOSE ASSY, 1/2, SWV STR, SWV STR, 24.8 |
| 05 | 2.00 | EA | 594-02-6 | LUG, ELEVATOR LINK, 750 TON |
| 06 | 2.00 | EA | DT16242 | PIVOT PIN, LINK TILT |
| 07 | 1.00 | EA | 594-07-0 | MANIFOLD, HYDRAULIC, LINK TILT |
| 09 | 2.00 | EA | DT12642 | CYLINDER, LINK TILT |
| 09A | 0.00 | EA | H10242 | CYLINDER SEAL KIT |
| 09B | 0.00 | EA | H19-1004-010 | CYLINDER ROD EYE |
| 09C | 0.00 | EA | M04-1000-020 | BEARING, PLAIN RADIAL |
| 09D | 0.00 | EA | M11-1022-010 | RETAINING RING, INTERNAL |
| 09E | 0.00 | EA | DT13000 | SEAL KIT INSTRUCTIONS |
| 10 | 1.00 | EA | 689-16-0 | MOUNT, FLOW DIVIDER, LINK TILT |
| 13 | 1.00 | EA | DT14077 | MOUNT, CYL, LINK TILT, 650T |
| 14 | 1.00 | EA | H04-1012-010 | FLOW DIVIDER |
| 15 | 2.00 | EA | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB |
| 16 | 7.00 | EA | H15-520220-08-08 | ELL 90°, MALE 1/2 ORFS, MALE 1/2 ORB |
| 17 | 1.00 | EA | H15-520701-08 | ELL 90°, BULKHEAD, MALE 1/2 ORFS |
| 18 | 0.00 | EA | H15-520118-08 | LOCKNUT, BULKHEAD 1/2, 13/16-16UNF |
| 20 | 4.00 | EA | M19-3009-010 | FERRULE, 1/8, OVAL, ALUMINIUM |
| 21 | 3.00 | FT | M10022 | WIRE ROPE, 1/8, STAINLESS, 7 X 19 |
| 22 | 2.00 | EA | DT16240 | PIVOT PIN BOLT, LINK TILT |
| 25 | 2.00 | EA | SH-0312NC-0500-W | CAPSCR, HEX SOC HD, 5/16-18UNC x 5.00, W |
| 26 | 3.00 | EA | SH-0312NC-0100-W | CAPSCR, HEX SOC HD, 5/16-18UNC x 1.00 |
| 27 | 2.00 | EA | LN-0312NC-GR8 | LOCKNUT, 5/16-18UNC, GR8, STOVER |
| 28 | 2.00 | EA | HSN-0250NC-GR8 | HEX NUT, SLOTTED, 1/4-20UNC |
| 29 | 5.00 | EA | FW-0312-A | WASHER, F, 5/16, PLAIN, TYPE A |
| 33 | 1.00 | EA | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB |
| 35 | 2.00 | EA | DT14408 | RETAINING NUT WDMT, LINK TILT |
| 36 | 2.00 | EA | M24-3010-010 | COTTER PIN, 3/16 x 3.00 |
| 37 | 2.00 | EA | H15-520320-08 | ELL 45°, MALE 1/2 ORFS, MALE 1/2 ORB |
| 38 | 2.00 | EA | F451JSJ7080808-25.07-X-22 | HOSE ASSY, 1/2, SWV STR, 45° ELL, 25.07 |
| 39 | 2.00 | EA | M24-3012-010 | COTTER PIN, 1/16 x 1 LG |
| 40 | 2.00 | EA | M10241 | FERRULE, 1/8, STOP, ALUMINIUM |
| Part: AY10167 | ||||
| Description: BRAKE ASSY, 5 CALIPER, GE B20 AC | ||||
| Drawing ID: AY10167 Rev No: E | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | 686-32-0 | CALIPER MOUNTING PLATE |
| 02 | 1.00 | EA | 686-11-0 | BRAKE DISC |
| 04A | 2.00 | EA | 686-13-0-005 | SHIM, 0.005, DISC BRAKE |
| 04B | 2.00 | EA | 686-13-0-010 | SHIM, 0.010, DISC BRAKE |
| 04C | 2.00 | EA | 686-13-0-030 | SHIM, 0.030, DISC BRAKE |
| 04D | 2.00 | EA | 686-13-0-050 | SHIM, 0.050, DISC BRAKE |
| 05 | 2.00 | EA | 686-16-0 | BRACKET, DISC LOCKING |
| 05A | 4.00 | EA | HH-0500NC-0100-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.00, GR8, W |
| 05B | 4.00 | EA | LW-0500-NL | LOCKWASHER, 1/2 NORD-LOCK |
| 06 | 2.00 | EA | HH-0500NC-0175-GR8-W | CAPSCR, HEX HD, 1/2-13UNC x 1.75, GR8 |
| 07 | 2.00 | EA | LN-0500NC-GR8 | LOCKNUT, 1/2-13UNC, GR8, STOVER |
| 08 | 5.00 | EA | M16-1000-010 | CALIPER, BRAKE |
| 08A | 0.00 | EA | M16-1000-01A | PAD, FRICTION SHOE, DISC BRAKE |
| 08B | 0.00 | EA | M16-1000-01B | SEAL KIT, DISC BRAKE |
| 11 | 4.00 | EA | SH-0750NC-0225-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 2.25 |
| 12 | 8.00 | EA | SH-1000NC-0200-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.00 |
| 18 | 3.00 | EA | M19-5005-010 | EYEBOLT, SHLD TYPE, 1-8UNC x 2 1/2 |
| 19 | 4.00 | EA | H15-520220-04-04 | ELL 90°, MALE 1/4 ORFS, MALE 1/4 ORB |
| 25 | 4.00 | PAIR | LW-0750-NL | LOCKWASHER, 3/4 NORD-LOCK |
| 26 | 8.00 | EA | LW-1000-IT | LOCKWASHER, 1 INT TOOTH |
| 28 | 3.00 | EA | LW-1000-IT | LOCKWASHER, 1 INT TOOTH |
| 29 | 168.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 30 | 26.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 31 | 1.00 | EA | DT11324 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 32 | 1.00 | EA | DT11325 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 33 | 1.00 | EA | DT11326 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 34 | 1.00 | EA | DT11327 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 35 | 1.00 | EA | DT11328 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 36 | 1.00 | EA | DT11329 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 37 | 1.00 | EA | DT11330 | HYDRAULIC TUBE, 1/4, DISC BRAK |
| 38 | 7.00 | EA | H15-2000-04-02 | ELL 90°, MALE 1/4 ORFS, MALE 1/8 NPT |
| 39 | 3.00 | EA | H15-2001-04-02 | ADAPTER, MALE 1/4 ORFS, MALE 1/8 NPT |
| 40 | 4.00 | EA | H15-520120-04-04 | CONNECTOR, MALE 1/4 ORFS, MALE 1/4 ORB |
| 41 | 7.00 | EA | H15-090109B-04 | PLUG, SOC HEX, 1/4 ORB |
| Part: AY10175 | ||||
| Description: GEARCASE ASSY, 6.81:1 GEAR RATIO | ||||
| Drawing ID: AY10175 Rev No: G | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 2.00 | EA | 681-25-0 | RETAINER, BEARING |
| 02 | 4.00 | EA | 681-29-0 | KEY, 0.75 DRIVE HUB/SPINDLE |
| 03 | 1.00 | EA | 315-11-0 | GEAR, BULL, 177T |
| 04 | 1.00 | EA | 911-18-0 | HUB, DRIVE, BULL GEAR |
| 05 | 1.00 | EA | 911-20-0 | GEARCASE |
| 06 | 6.00 | EA | E03-2000-010 | CABLE TIE, 13.4 IN LG, 120 LB |
| 07 | 1.00 | EA | H13-1005-010 | PLUG, MAGNETIC, 3/4 NPT |
| 08 | 2.00 | EA | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB |
| 09 | 1.00 | EA | H15-140109P-08 | PLUG, SOC HEX, 1/2 NPT |
| 10 | 2.00 | EA | H15-140109P-12 | PLUG, SOC HEX, 3/4 NPT |
| 11 | 1.00 | EA | DT10240 | DRAIN ASSEMBLY |
| 12 | 1.00 | EA | M10117 | ROLLER BEARING |
| 13 | 2.00 | EA | M11-1036-010 | RETNG RING, EXT |
| 14 | 1.00 | EA | M10035 | DOWEL PIN |
| 15 | 2.00 | EA | M17-1009-010 | DOWEL PIN, 3/8 x 1.50, GRD & HDNED |
| 16 | 20.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 17 | 25.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 18 | 1.00 | EA | M25-1001-010 | MAGNET, GEARCASE |
| 20 | 16.00 | EA | SH-1000NC-0200-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.00 |
| 21 | 29.00 | EA | SH-0750NC-0200-W | CAPSCR, HEX SOC HD, 3/4-10UNC x 2.00 |
| 22 | 13.00 | EA | SH-0500NC-0150-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.50 |
| 23 | 12.00 | EA | SH-0375NC-0125-W | CAPSCR, HEX SOC HD, 3/8-16UNC x 1.25 |
| 24 | 2.00 | EA | SH-0250NC-0038-W | CAPSCR, HEX SOC HD, 1/4-20UNC x 0.38 |
| 25 | 17.00 | EA | BH-0500NC-0150 | CAPSCR, BUTTON HD SOC, 1/2-13UNC x 1.50 |
| 26 | 16.00 | EA | LW-1000-IT | LOCKWASHER, 1 INT TOOTH |
| 27 | 29.00 | EA | LW-0750-IT | LOCKWASHER, 3/4 INT TOOTH |
| 29 | 4.00 | EA | LW-0375-IT | LOCKWASHER, 3/8 INT TOOTH |
| 30 | 2.00 | EA | LW-0250-IT | LOCKWASHER, 1/4 INT TOOTH |
| 31 | 1.00 | EA | S01-1229-01N | O-RING |
| 33 | 1.00 | EA | H15-140109E-08 | PLUG, HEX HD, 1/2 NPT |
| 34 | 35.00 | EA | HH-0500NC-0150-GR8 | CAPSCR, HEX HD, 1/2-13UNC x 1.50, GR8 |
| Part: AY10180 | ||||
| Description: TORQUE BOOST ASSY, 28T PINION | ||||
| Drawing ID: AY10180 Rev No: B | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | AY10319 | MOTOR/GEARBOX ASSEMBLY |
| 02 | 1.00 | EA | 602-04-0 | PISTON/JAW CLUTCH, TORQUE BOOST |
| 03 | 1.00 | EA | 602-08 | RETAINER, UPPER SPRING |
| 04 | 1.00 | EA | 602-12-0 | GLAND, TORQUE BOOST |
| 05 | 1.00 | EA | 602-14 | SPLINED SHAFT |
| 06 | 1.00 | EA | 315-12-0 | GEAR, PINION, 28T |
| 07 | 1.00 | EA | 602-26-0 | SPRING |
| 08 | 1.00 | EA | 602-29-0 | SHAFT, GEAR/JAW CLUTCH, TB |
| 09 | 1.00 | EA | 602-30-0 | FLINGER, LOWER BEARING, TORQUE BOOST |
| 10 | 1.00 | EA | 602-31-0 | SPACER, BEARING/RETAINING RING. |
| 11 | 1.00 | EA | 602-35-0 | BELL HOUSING, TORQUE BOOST |
| 12 | 1.00 | EA | H15-090109B-08 | PLUG, SOC HEX, 1/2 ORB |
| 13 | 1.00 | EA | M01-1009-010 | BEARING, SPHERICAL ROLLER |
| 14 | 1.00 | EA | M01-1012-010 | TAPERED ROLLER BEARING |
| 15 | 1.00 | EA | M01-1023-010 | ROLLER BEARINGL |
| 16 | 1.00 | EA | M11-1002-010 | RETAINING RING, EXT |
| 17 | 1.00 | EA | M11-1007-010 | RETAINING RING, EXT |
| 18 | 1.00 | EA | M11-1020-010 | RETAINING RING, INT |
| 19 | 1.00 | EA | M14-1009-010 | SPRING |
| 20 | 1.00 | EA | M17-1002-010 | ROLL PIN, 3/8 x 0.75 |
| 21 | 1.00 | EA | M17-1003-010 | BALL, STEEL, 7/16 |
| 22 | 1.00 | EA | S01-1254-01N | O-RING |
| 23 | 1.00 | EA | S01-1266-01N | O-RING |
| 24 | 2.00 | EA | S05-1009-010 | SEAL |
| 24A | 0.00 | EA | S01-1157-01N | O-RING |
| 25 | 1.00 | EA | S05-1010-010 | SEAL |
| 25A | 0.00 | EA | S01-1159-01N | O-RING |
| 26 | 12.00 | EA | SH-0500NC-0175-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.75 |
| 27 | 1.00 | EA | SS-0625NC-0050 | SETSCREW 5/8-11UNC x 0.50 FLAT POINT |
| 28 | 12.00 | EA | LW-0500-IT | LOCKWASHER, 1/2 INT TOOTH |
| 29 | 40.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 30 | 2.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| 31 | 0.00 | EA | S08-1031-010 | SEAL KIT, TORQUE BOOST, UNIVERSAL |
| Part: AY10182 | ||||
| Description: TORQUE BOOST KIT, 28T, HIGH RATIO | ||||
| Drawing ID: AY10182 Rev No: C | ||||
| Item | Qty | Units | Part ID | Description |
| 2.00 | EA | H15-520112-04 | CAP, 1/4 ORFS | |
| 4.00 | EA | H15-520112-08 | CAP, 1/2 ORFS | |
| 2.00 | EA | H15-520120-08-08 | ADAPTER, MALE 1/2 ORFS, MALE 1/2 ORB | |
| 2.00 | EA | H15-520220-04-04 | ELL 90°, MALE 1/4 ORFS, MALE 1/4 ORB | |
| 2.00 | EA | H15-520220-08-10 | ELL 90°, MALE 1/2 ORFS, MALE 5/8 ORB | |
| 01 | 1.00 | EA | AY10180 | TORQUE BOOST ASSY, 28T PINION |
| 02 | 1.00 | EA | 602-37-0 | SLEEVE, BELL HOUSING |
| 03 | 1.00 | EA | S01-1267-01N | O-RING |
| 04 | 1.00 | EA | S01-1272-01N | O-RING |
| 05 | 2.00 | EA | SH-1000NC-0200-W | CAPSCR, HEX SOC HD, 1-8UNC x 2.00 |
| 06 | 2.00 | EA | LW-1000-IT | LOCKWASHER, 1 INT TOOTH |
| 07 | 0.00 | EA | DT12152 | GASKET, COVER PLATE, TORQUE BOOST |
| 08 | 0.00 | EA | DT12151 | PLATE, COVER, TORQUE BOOST |
| 09 | 40.00 | IN | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 10 | 2.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| Part: AY10183 | ||||
| Description: EXHAUST PLENUM ASSY, B20 AC MOTOR | ||||
| Drawing ID: AY10183 Rev No: H | ||||
| Item | Qty | Units | Part ID | Description |
| 01 | 1.00 | EA | DT10119 | EXHAUST PLENUM |
| 02 | 1.00 | EA | H15-140109E-06 | PLUG, HEX HD, 3/8 NPT |
| 03 | 7.50 | FT | S07-1001-010 | WEATHERSTRIP |
| 04 | 4.00 | EA | LW-0500-IT | LOCKWASHER, 1/2 INT TOOTH |
| 05 | 4.00 | EA | SH-0500NC-0125-W | CAPSCR, HEX SOC HD, 1/2-13UNC x 1.25 |
| 06 | 4.00 | EA | FS-0500NC-0400 | CAPSCR, FLAT HD SOC, 1/2-13UNC x 4.00 |
| 07 | 8.00 | EA | FS-0312NC-0063 | CAPSCR, FLAT HD SOC, 5/16-18UNC x 0.63 |
| 08 | 1.00 | EA | AY10489 | HEATER ASSY, PLENUM, GE B20 MOTOR |
| 09 | 2.00 | FT | M21-2000-010 | WIRE ROPE, 1/16″ DIA |
| 10 | 2.00 | EA | M19-3006-010 | OVAL SLEEVE 1/16″ DIA ALUMINUM |
| PARTS FOR CANRIG TOP DRIVE MODEL:1275AC-681 | ||||
| ITEM | DESCRIPTION | PART NO. | QTY. | UNIT |
| 1 | PIN, DIE RETAINER | 588-26-0 | 4 | EA |
| 2 | ROD. SPRING GUIDE,STABBING BELL | 829-17-0 | 4 | EA |
| 3 | KIT, REPAIR, GRIPPER CYL,BUW | M23-1004-010 | 2 | EA |
| 4 | TONG DIE, 1/2 x 1 1/4×5 LONG | R02-1000-010 | 32 | EA |
| 5 | O-RING, 10 x 10 1/2 x 1/4 | S01-1449-01N | 2 | EA |
| 6 | O-RING, 15 x 15 1/2x 1/4 | S01-1459-01N | 2 | EA |
| 7 | SEAL, SINGLE LIP, 12.50×14.00×0.688 | S05-1040-010 | 6 | EA |
| 8 | O-RING, 8 1/2 x 8 11/16×3/32 | S01-1173-01N | 2 | EA |
| 9 | O-RING, 17 x 17 3/8 x 3/16 | S01-1386-01N | 2 | EA |
| 10 | SEAL, SINGLE LIP, 10.0×11.5×0.687 | S05-1048-010 | 4 | EA |
| 11 | ACTUATOR ASSY, BRAKE | AY11000 | 2 | EA |
| 12 | CYL, HYD, BORE 2.00, ROD1.38,STRK 3.75 | DT10715 | 4 | EA |
| 13 | SEAL KIT, CYL, 2 BORE, 1 3/8ROD | S08-1038-010 | 4 | EA |
| 14 | ELL 90°, MALE 1/2 JIC, MALE 3/8 ORB | H15-070220-08-06 | 4 | EA |
| 15 | PINION,18T, ACTUATOR,LWCV ,CDTL, 8.45 x 3.06 | DT15105 | 4 | EA |
| 16 | O-RING. 2 3/8 x 2 5/8 x 1/8 | S01-1229-01N | 2 | EA |
| 17 | CYL, HYD, STRK 1, HANDLER LOCK | 920-11-0 | 2 | EA |
| 18 | BREATHER, VENT | H13-1039-010 | 2 | EA |
| 19 | CPLG, SPIDER ELEMENT STYLE A NBR MAT | M03-1003-010 | 2 | EA |
| 20 | FILTER ELEMENT, 12 MICRON, CARTRIDGE | H11-1000-02A | 16 | EA |
| 21 | FILTER ELEMENT, 25 MICRON, SPIN-ON | H11-1000-01A | 16 | EA |
| 22 | ORIFICE, 4 mm | DT11431 | 2 | EA |
| 23 | VLV, HYD, PRESS RELIEF, DUAL SAND, D03 | H06-1006-010 | 2 | EA |
| 24 | VLV, HYD, PRESSURE REDUCING CARTRIDGE | H10052 | 2 | EA |
| 25 | VLV, HYD, DIR, 3 POS, 4 WAY,24V, D03 | H10053 | 2 | EA |
| 26 | VLV, HYD, FLOW CONTROL CARTRIDGE | H10054 | 2 | EA |
| 27 | VLV, HYD, CBAL, 4.5:1 RATIO,CARTRIDGE | H10055 | 2 | EA |
| 28 | VLV, HYD, PRESS RELIEF, PILOT, CARTRIDGE | H10056 | 2 | EA |
| 29 | CARTRIDGE, CHECK, NOSE-TO-SIDE | H10057 | 2 | EA |
| 30 | VLV, HYD, DIR, 3 POS, 4 WAY, 24V, D03 | H10059 | 2 | EA |
| 31 | CARTRIDGE, P.O. CHECK | H10071 | 2 | EA |
| 32 | CARTRIDGE, CHECK, SIDE TO NOSE | H10117 | 2 | EA |
| 33 | VLV, HYD, DIR, 2 POS, 4 WAY, 24V, D03 | H10142 | 2 | EA |
| 34 | SOLENOID, 24V | H10151 | 4 | EA |
| 35 | ORIFICE, 1.5mm, M6 THREAD | H13-1013-010 | 6 | EA |
| 36 | TEST STATION, #4 SAE | H22-1000-010 | 4 | EA |
| 37 | GLAND, CBALANCE CYL | 683-16-0 | 4 | EA |
| 38 | RETNG RING, INT, 3.00 BORE, 0.093 THK | M11-1006-010 | 4 | EA |
| 39 | O-RING, 2 5/16 x 2 1/2 x 3/32 | S01-1141-01N | 4 | EA |
| 40 | WIPER, 1 3/4×2 1/8×3/16 | S02-1004-010 | 4 | EA |
| 41 | POLYPAK, 1 3/4×2 1/8×3/16 | S03-1008-010 | 4 | EA |
| 42 | CYL, HYD, BORE 3 1/4, ROD 2, STRK 47.94 | DT12642 | 2 | EA |
| 43 | SEAL KIT, BORE 3.25, ROD 2 | H10242 | 4 | EA |
| 44 | CPLG, HALF, 7/8 BORE, 3/16 KEY | M03-1000-020 | 4 | EA |
| 45 | CPLG, SPIDER ELEMENT STYLE A NBR MAT | M03-1002-020 | 2 | EA |
| 46 | KIT, O-RING, TOP DRIVE | AY11701 | 2 | EA |
| 47 | KIT, HOSE & FITTINGS | H16-8001-010 | 2 | EA |
| 48 | GREASE NIPPLE, 1/8 NPT, STRAIGHT | M12-1000-010 | 4 | EA |
| 49 | KIT, BOLT, SPARES | M20-1030-010 | 2 | EA |
| 50 | CALIPER, MICO BRAKE | M16-1000-020 | 2 | EA |
| 51 | PAD, FRICTION SHOE, DISCBRAKE | M16-1000-02A | 20 | EA |
| 52 | SEAL KIT, DISC BRAKE | M16-1000-02B | 20 | EA |
| 53 | O-RING, 5.73 x 6.01 x 0.139, VITON | S01-1256-01V | 2 | EA |
| 54 | SEAL | S05-1017-010 | 4 | EA |
| 55 | SEAL, SILICONE FOAM RUBBER CORD, 1/2 DIA | S10075 | 6 | FT |
| 56 | BRG RING, OUTSIDE, 12.000 DIA | 681-20-0 | 6 | EA |
| 57 | MOD, BRG RING, QUILL INST | DT12450 | 18 | EA |
| 58 | POLYPAK, 8 1/4 x 9 x 5/8 | S03-1021-010 | 4 | EA |
| 59 | POLYPAK, 7 3/4 x 8 3/8 x 5/16 | S03-1029-010 | 4 | EA |
| 60 | KEY, 10mm x 8mm | 596-07-0 | 2 | EA |
| 61 | BRG RING, OUTSIDE, 14.00 DIA | 742-14-0 | 2 | EA |
| 62 | O-RING, 7/16 x 5/8 X 3/32 | S01-1111-01VS | 28 | EA |
| 63 | O-RING, 13 x 13 1/4 x 1/8 | S01-1279-01N | 4 | EA |
| 64 | SEAL, PISTON RING,14in x 13.5in | S05-1033-010 | 30 | EA |
| 65 | WTHRSTRP, 1/4 THK X 1 W, FOAM, ADHESIVE | S07-1001-010 | 600 | IN |
| 66 | INPUT, RTD, 8PT, FLEX I/O | N10007 | 2 | EA |
| 67 | SWITCH, DIFF PRESSURE, .2-5.6 IN WTR | N10161 | 2 | EA |
| 68 | PISTON/JAW CLUTCH, TORQUE BOOST | 602-04-0 | 2 | EA |
| 69 | GASKET, MOTOR/GEARBOX | 602-40-0 | 2 | EA |
| 70 | O-RING, 5 1/2×5 3/4×1/8 | S01-1254-01N | 2 | EA |
| 71 | SEAL KIT, TORQUE BOOST, UNIVERSAL | S08-1031-010 | 2 | EA |
| 72 | GASKET, VIEWCOVER, GRCASE, 12.25 x 5.25 | 911-14-0 | 2 | EA |
| 73 | WASHPIPE, 4 BORE, 7500 PSI | 325-14-0 | 6 | EA |
| 74 | GREASE NIPPLE, 1/8 NPTx 1 1/4 LONG | R01-1003-01A | 4 | EA |
| 75 | PACKING, 4 IN, WASHPIPE | R01-3003-030 | 12 | EA |
| 76 | O-RING, 5 3/4×6 1/8×3/16 | S01-1359-01N | 4 | EA |
| 77 | LWCV ASSY, MANUAL, 6 5/8REG x 6 5/8 REG | AY10495-2 | 2 | EA |
| 78 | KEY,1.250, SPINDLE/DRIVESPLINE | 681-26-0 | 2 | EA |
| 79 | PISTON, CBAL CYL, 2.50 DIA | 683-14-0 | 2 | EA |
| 80 | SPACER, PINION/MOTOR | 691-14-0 | 2 | EA |
| 81 | PINION RETAINER | 691-15-0 | 2 | EA |
| 82 | SPLIT RING, RETNG,GOOSENECK 4 BORE | DT10345 | 2 | EA |
| 83 | RING, UPPER SEAL, 4in, MACH | DT13122 | 4 | EA |
| 84 | PIN, BAIL, 750 TON, 4.75 DIA | DT13551 | 8 | EA |
| 85 | PIVOT PIN, LINK TILT | DT16242 | 4 | EA |
| 86 | UNION SEAL | F04-1002-040 | 4 | EA |
| 87 | HYDRAULIC OIL FILTER | H11-1000-030 | 2 | EA |
| 88 | LOW PRESSURE FILTER | H11-1000-010 | 2 | EA |
| 89 | ANTI-VIBRATION RUBBERMOUNT | M27-1001-010 | 8 | EA |
| 90 | AIR FILTER 250 PSI MAX WORK PRESSURE | P02-1010-010 | 2 | EA |
| 91 | SPACER ASSEMBLY | R01-3002-010 | 2 | EA |
| 92 | LOWER SPACER | R01-3005-010 | 4 | EA |
| 93 | MIDDLE SPACER | R01-3006-010 | 2 | EA |
| 94 | CYLINDER SEAL KIT | S08-1005-010 | 4 | EA |
| 95 | TELESCOPING TUBE ASSY, BUW, 43.25 | AY10028-4 | 2 | EA |
| 96 | DIE BLOCK, 5.75 – 9.00 IN DIA | DT14330 | 1 | EA |
| 97 | PUMP, HYD, GEAR, 0.73 CI/REV | H01-1001-040 | 1 | EA |
| 98 | WASHPIPE ASSY, 4.00 BORE, 7.5 KSI | AY10147 | 1 | EA |
| 99 | QUILL, 750 TON, 4.00 BORE, 7 5/8 ,COATED | DT10071 | 1 | EA |
| 100 | SERVICE LOOP, HYD, ASSY. , 89 FT | AY13546-11 | 1 | EA |
| 101 | SERVICE LOOP, EL, DUAL, POWER, 5″ 90 FT | AY17421 | 1 | EA |
| 102 | SERVICE LOOP, EL, DUAL, CONTROL, 4 IN | AY17422 | 1 | EA |
| 103 | SERVICE LOOP, EL, DUAL, AC, FLEX, 90 FT | AY17423 | 1 | EA |