Description
SICHUAN HONG HUA MUD PUMP HH MUD PUMP | ||
GH3101.00 HHF-1000 Drilling pump Parts list | ||
CONTENTS | ||
I GH3101-00 HHF-1000 General drawing of drilling pump | 2 | |
II Parts drawings of drilling pump | 7 | |
1 GH3101-01.00Frame assembly | 7 | |
2 GH3101-02.00 Crankshaft assembly | 9 | |
3 GH3101-03.00 Pinion shaft assembly | 12 | |
4 GH3101-04.00 Crosshead assembly | 14 | |
5 GH3101-05.00 Fluid end assembly | 16 | |
6 GH3101-06.00 End cover | 19 | |
7 GH3101-08.00Liner spraying assembly | 22 | |
8 GH3101-10.00 Breather cap | 24 | |
9 GH3101-15.00Oil level gauge | 25 | |
10 GH3101-17.00Clean out cover | 26 | |
11 GH3101-22.00Draining filter assembly | 28 | |
12 GH3101-27.00 KB-75Surge damper | 29 | |
13 GH3101-28.00A JA-3 Relieve valve | 32 | |
GH3161-22.00BElbow assembly | 35 | |
HHF-1000 Drilling pump parts list | ||
I GH3101-00 HHF-1000 General drawing of drilling pump | ||
GH3101-00 HHF-1000 drilling pump | ||
No. | Drawing No. | Name |
1 | GH3101-01.00 | Frame assembly |
2 | GH3101-02.00 | Crankshaft assembly |
3 | GH3101-03.00 | Pinion shaft assembly |
4 | GH3101-04.00 | Crosshead assembly |
5 | GH3101-05.00 | Fluid end assembly |
6 | American standard (item 6) | Screw :8 (0.164)-32UNC-2AX10 |
7 | GH3101-06.00 | Power end lube assembly |
8 | GH3101-07.00 | substructure |
9 | GH3101-08.00 | spraying pump assembly |
10 | GH3101-09 | Seal gasket |
11 | GH3101-10.00 | Breather cap |
12 | GH3101-11A | Nameplate |
13 | GH3101-12.00 | Cover plate assembly |
14 | American standard (item 14) | Bolt:1/2-13UNC-2AX35 |
15 | GB/T97.1-1985 | Washer : 14 |
16 | GH3101-13 | Seal pad |
17 | GH3101-14 | Indication plate |
18 | GH3101-15.00 | Oil level gauge |
19 | GH3101-16 | Adjusting gasket |
20 | GH3101-17.00 | Clean out cover |
21 | GB/T97.1-1985 | Washer : 16 |
22 | American standard (item 14) | Bolt:1/2-13UNC-2AX35 |
23 | GH3101-18 | Seal gasket |
24 | GH3101-19 | Screw plug:R1 1/2 |
25 | GH3101-20 | Cover, crosshead hole |
26 | American standard (item 26) | Bolt:5/8-11UNC-2AX45 |
27 | GH3101-21 | Seal pad |
28 | GH3101-22.00 | Draining filter assembly |
29 | American standard (item 29) | Bolt:1-8UNC-2AX90 |
30 | GH3101-23 | Ring gasket R44 |
31 | GH3161-22.00B | Elbow assembly |
32 | GH3101-25.00 | Special tools |
33 | GH3101-26 | Flange:5 1/8X35 |
34 | American standard (item 26) | Bolt:5/8-11UNC-2AX45 |
35 | GH3101-27.00 | KB-75Surge damper |
36 | GH3101-28.00A | JA-3Relieve valve |
37 | GH3101-29.00 | Spare parts delivered with |
38 | GH3101-30.00 | Cover plates assembly |
39 | GH3101-31 | Nut:1-8UNC-2B(SPL) |
40 | GH3101-32 | Nut:5/8-8UNC-2B(SPL) |
41 | GB/T93-1987 | Washer :27 |
42 | GB/T827-1986 | rivet:3X10 |
43 | Rubber:30X10X4880 | |
44 | YK-150 | Pressure gauge: 0—40MPa(0—5800psi) |
45 | American standard (item 45) | Bolt:1-8UNC-2AX70 |
II Parts drawings of drilling pump | ||
1 GH3101-01.00Frame assembly | ||
No. | Drawing No. | Name |
1 | GH3101-01.01.00 | frame |
2 | GH3101-01.02 | Main bearing cover |
3 | GH3101-01.03 | Shim set |
4 | GH3101-01.04 | Connector :NPT3/4-NPT3/4 |
5 | GH3101-01.05 | Screw plug:NPT3/4 |
2 GH3101-02.00 Crankshaft assembly | ||
No. | Drawing No. | Name |
1 | GH3101-02.01.00 | Cover, main bearing |
2 | GH3101-02.02 | Sleeve, main bearing (right) |
3 | GH3101-02.03 | Seal gasket |
4 | GH3101-02.04 | Insider retainer |
5 | GH3101-02.05.00 | Outside retainer |
6 | GH3101-02.06 | Connecting rod |
7 | GH3101-02.07 | Locating ring(I) |
8 | GH3101-02.08.00 | Crankshaft |
9 | GH3101-02.09 | Locating ring(II) |
10 | GH3101-02.10B | Bull gear(widened) |
11 | GH3101-02.11 | Bolt:1 1/4-8UN-2AX108 |
12 | GH3101-02.12.00 | Nut:1 1/4-8UN-2B |
13 | GH3101-02.13 | retainer ring |
14 | GH3101-02.14 | Sleeve, main bearing (left) |
15 | GH3101-02.15 | Plug |
16 | GH3101-02.16 | Bolt:5/8-11UNC-2AX45 |
17 | GH3101-02.17 | Baffle |
18 | GH3101-02.18 | Bolt, main bearing:2 1/2-8UN-3A |
19 | GH3101-02.19.00 | Shim set |
20 | GH3101-02.20 | Screw : 5/8-11UNC-2AX100 |
21 | GH3101-02.21 | Eccentric wheel Bearing: 929/558.8QU |
22 | GH3101-02.22 | Main bearing:3G4053156H |
23 | GB/T343-1994 | Locking wire:SZ-1.50 |
24 | GB/T343-1994 | Locking wire:SZ-3.00 |
25 | 242 | Threaded Sealant |
26 | GB/T848-1985 | Washer: 16 |
3 GH3101-03.00 Pinion shaft assembly | ||
No. | Drawing No. | Name |
1 | GH3101-03.01 | key:2″X2″X203 |
2 | GH3101-03.02B | Pinion Shaft(widened) |
3 | GH3101-03.03 | Sleeve |
4 | GH3101-03.04 | End cover |
5 | GH3101-03.05 | Seal gasket |
6 | GH3101-03.06 | Seal gasket |
7 | GH3101-03.07 | Bearing Housing |
8 | GH3101-03.08 | Retainer ring |
9 | GH3101-03.09 | Seal gasket |
10 | GH3101-03.10.00 | Oil trough |
11 | American standard (item 11) | Bolt:1/2-13UNC-2AX35 |
12 | American standard (item 12) | Bolt:7/8-9UNC-2AX52 |
13 | GH3101-03.11 | Oil seal:8.5″X10.5″X0.625″ |
14 | GH3101-03.12 | Bearing:4G32840H |
15 | GB/T93-1987 | Washer :22 |
16 | GB/T93-1987 | Washer : 14 |
17 | GH3101-03.13 | Flange |
18 | American standard (item 18) | Bolt:5/8-11UNC-2AX50 |
19 | GB/T93-1987 | Washer : 16 |
4 GH3101-04.00 Crosshead assembly | ||
No. | Drawing No. | Name |
1 | GH3101.04.01 | Crosshead |
2 | GH3101.04.02 | Slide, Upper |
3 | American standard (item 3) | Bolt:1-8UNC-2AX55 |
4 | GH3101-04.03 | End cover |
5 | GB/T3452.1-1992 | O ring:175X3.55G |
6 | GH3101-04.04 | Stuffing box |
7 | GH3101-04.05 | Seal gasket |
8 | GH3101-04.06 | Oil Seal |
9 | GH3101-04.07 | Pipe joint:NPT3/8X50.8 |
10 | GH3101-04.08 | Mudguard |
11 | GH3101-04.09 | intermediate extension rod |
12 | GH3101-04.10 | Crosshead Pin |
13 | American standard (item 13) | Bolt:1-8UNC-2AX65 |
14 | GH3101-04.11 | Adjusting gasket |
15 | GH3101-04.12 | Slide, Lower |
16 | GH3101-04.13 | Fixing plate |
17 | GB/T3452.1-1992 | O ring:140X7.0G |
18 | American standard (item 18) | Bolt:3/8-16UNC-2AX35 |
19 | GB/T93-1987 | Washer :10 |
20 | GH3101-04.14 | Locking Spring |
21 | American standard (item 21) | Screw : 3/4-10UNC-2AX55 |
22 | GH3101-04.15 | Seal pad |
23 | GH3101-04.16 | Crosshead Pin Cap |
24 | GH3101-04.17 | Crosshead Bearing:5G254936Q |
25 | GH3101-04.18 | Oil Seal:4.5″X5.5″X0.5″ |
26 | GB/T4240-1993 | Stainless steel Wire : Φ 1.60 (L=300) |
27 | GB/T4240-1993 | Stainless steel Wire : Φ 1.60 (L=500) |
28 | GB/T4240-1993 | Stainless steel Wire : Φ 1.60 (L=400) |
29 | GH3101-04.19.00 | Shim set |
30 | 242 | Seal glue |
31 | GB/T3452.1-1992 | O ring:115X5.30G |
5 GH3101-05.00 Fluid end assembly | ||
No. | Drawing No. | Name |
1 | GH3101-05.01.00 | Cylinder assembly |
2 | GH3101-05.02 | Stick, liner cover flange |
3 | GH3101-05.03 | Stick, liner cover |
4 | GH3101-05.04 | Liner locking Ring |
5 | GH3101-05.05 | Cylinder cover plug |
6 | GH3101-05.06 | Puller & pusher |
7 | GB/T3452.1-1992 | O ring:97.5X3.55G |
8 | GH3101-05.07 | Closure plate, discharge let:5 1/8″ |
9 | GH3101-05.08 | Discharge manifold |
10 | GH3101-05.09 | Seal ring for valve cover |
11 | GH3101-05.10 | bolt:1 1/2-8UN-2AX262 |
12 | GH3101-05.01.03 | Nut:1 1/2-8UN-2B(SPL) |
13 | GH3101-05.11 | Valve cover |
14 | GH3101-05.12 | Valve rod guide device |
15 | GH3101-05.13.00 | Spring guide |
16 | GH3101-05.14 | Baffle |
17 | GH3101-05.15 | Bolt:3/8-16UNC-2AX20 |
18 | GB/T4240-1993 | Stainless steel Wire : Φ1.60 (L=1830) |
19 | GH3101-05.16 | Short connector |
20 | GH3101-05.17.00 | Valve assembly(API 6#) |
21 | GH3101-05.18.00 | Piston nut |
22 | GH3101-05.19.00A | Piston |
23 | GH3101-05.20 | Seal ring, piston |
24 | GH3101-05.21 | Piston rod |
25 | GH3101-05.22A GH3101-05.22 | Ordinary liner Double metal liner |
26 | GH3101-05.23.00 | Spraying pipe assembly |
27 | GH3101-05.24.00 | Clamp assembly |
28 | GH3101-05.25 | Liner end cover |
29 | GH3101-05.26 | Fixing clamp |
30 | GH3101-05.27.00 | Valve rod guide |
31 | GB/T3452.1-1992 | O ring:190X7.0G |
32 | American standard (item 32) | Bolt:7/8-9UNC-2AX55 |
33 | GH3101-05.28.00 | Suction manifold |
34 | GH3101-05.29.00 | Suction damper |
35 | GH3101-05.30.00 | Shim set |
36 | American standard (item 36) | Bolt:1 1/16-8UN-2AX90 |
37 | American standard (item 37) | Nut:1 1/16-8UN-2B(SPL) |
38 | GB/T3452.1-1992 | O ring:345X7.0G |
39 | GH3101-05.31 | Suction flange(I) |
40 | GH3101-05.32 | Suction flange(II) |
41 | GN3101-05.33 | Screw plug:NPT1 1/2 |
42 | GH3101-05.34 | Washer :39 |
43 | GH3101-05.35 | Plug, suction let:12″ |
44 | 277 | Sealant |
6 GH3101-06.00 End cover | ||
No. | Drawing No. | Name |
1 | GH3101-06.01.00 | clamp:Φ12 |
2 | GB/T1527-1997 | Copper tube:Φ10X1270 |
3 | GH3101-06.02 | Pipe joint |
4 | GH3101-06.03.00 | Dual pipe clamp:Φ8 |
5 | GH3101-06.04.00 | Support seat |
6 | GH3101-06.05.00 | Shim set |
7 | GH3101-06.06.00 | Gear oil pump |
8 | GH3101-06.07 | Pipe joint:NPT1/4-9/16-16UN-2B |
9 | Y60-Z | Pressure, gauge : (9/16-16UN-2B) 0~1.6MPa(0~230psi) |
10 | GH3101-06.08 | 90°pipe joint: 1/2-20UNF-2A-NPT1/4 |
11 | GH3101-06.09 | Pipe joint:1/2-20UNF-2A |
12 | GH3101-06.10 | 90 ° Pipe joint : 11/16-16UN-2A-NPT1/4 |
13 | GB/T1527-1997 | Copper tube:Φ12X610 |
14 | GB/T1527-1997 | Copper tube:Φ8X966 |
15 | GH3101-06.11.00 | clamp:Φ8 |
16 | GB/T1527-1997 | Copper tube:Φ12X230 |
17 | GH3101-06.12 | Nozzle |
18 | American standard (item 18) | Bolt:1/4-20UNC-2AX20 |
19 | GB/T93-1987 | Washer :6(d1min=6.4) |
20 | GB/T1527-1997 | Copper tube:Φ8X305 |
21 | GB/T1527-1997 | Copper tube:Φ8X838 |
22 | GB/T1527-1997 | Copper tube:Φ8X584 |
23 | GB/T1527-1997 | Copper tube:Φ8X940 |
24 | GB/T1527-1997 | Copper tube:Φ8X1016 |
25 | GB/T1527-1997 | Copper tube:Φ8X584 |
26 | GH3101-06.13 | Screw plug:NPT1/4 |
27 | GH3101-06.14 | Joint seat (I) |
28 | GB/T1527-1997 | Copper tube:Φ8X153 |
29 | GB/T1527-1997 | Copper tube:Φ8X737 |
30 | GB/T1527-1997 | Copper tube:Φ8X661 |
31 | GH3101-06.15 | 45°Pipe joint |
32 | GH3101-06.16 | 90 ° Pipe joint : 11/16-16UN-2A-NPT3/8 |
33 | GH3101-06.17 | 90 ° Pipe joint : |
15/16-16UN-2A-NPT1/2 | ||
34 | GB/T1527-1997 | Copper tube:Φ16X331 |
35 | GB/T1527-1997 | Copper tube:Φ16X686 |
36 | GH3101-06.18.00 | clamp(I) |
37 | GH3101-06.19.00 | Oil filter |
38 | GH3101-06.20 | Straight joint : 15/16-16UN-2A-NPT1/2 |
39 | GH3101-06.08 | 90°Pipe joint: 1/2-20UNF-2A-NPT1/4 |
40 | GH3101-06.21 | Straight joint: 1/2-20UNF-2A-NPT1/4 |
41 | GH3101-06.22 | Joint seat (II) |
42 | YYFJ-L20 | Relief valve |
43 | American standard (item 43) | Screw :5/16-18UNC-2AX40 |
44 | GB/T93-1987 | Washer :8 |
45 | 2S Gear oil pump | |
46 | GH3101-06.23 | Key : 3/16X3/16X25.4 |
47 | GB/T1527-1997 | Copper tube:Φ8X1016 |
48 | GB/T1527-1997 | Copper tube:Φ8X267 |
49 | GB/T1527-1997 | Copper tube:Φ8X1372 |
50 | GB/T1527-1997 | Copper tube:Φ8X2007 |
51 | GH3101-06.24 | 90°Pipe joint:5/8-16UN-2A-NPT1/4 |
52 | GB/T1527-1997 | Copper tube:Φ10X1651 |
53 | GB/T1527-1997 | Copper tube:Φ8X1651 |
54 | GH3101-06.25 | Seal gasket |
55 | GH3101-06.26 | Gasket |
56 | 609 or 680 | Sealant |
57 | GH3101-06.27 | Nut:1/2-20UNF-2B |
58 | GH3101-06.28 | Nut:5/8-16UN-2B |
59 | GH3101-06.29 | Nut:11/16-16UN-2B |
60 | GH3101-06.30 | Bolt, hollow |
61 | GH3101-06.31 | Nut:15/16-16UN-2B |
7 GH3101-08.00Liner spraying assembly | ||
No. | Drawing No. | Name |
1 | GH3101-08.01.00A GH3101-08.01.00 | shield |
2 | GH3101-08.02 | Belt pulley |
3 | GH3101-08.03.00 | Seat assembly |
4 | GH3101-08.04 | Short connector:NPT1-1-11 1/2NPSC |
5 | GH3101-08.05 | Connector :NPT1 |
6 | GH3101-08.06 | Connector : 1-11 1/2NPSC ( 1 1/4-12UNF-2A) |
7 | GH3101-08.07 | Connector :NPT2 1/2 |
8 | GH3101-08.08 | Short connector:NPT2 1/2 |
9 | Hose:L=1500 | |
10 | GH3101-08.09.00 | Hose joint:Φ22XΦ37 |
11 | GH3101-08.10 | 90°elbow NPT1 |
12 | GH3101-08.11 | Connection plate |
13 | GH3101-08.12.00 | Water case |
14 | GH3101-08.13.00 | Case cover |
15 | GH3101-08.03.04 | Nut:5/8-11UNC-2B(SPL) |
16 | GH3101-08.14 | Shim set |
17 | GH3101-08.15 | Flange NPT1 |
18 | American standard (item 18) | Holding Screw :5/16-18UNC-2AX25 |
19 | GB117-74 | V belt:A3150 |
20 | clamp:No:3 | |
21 | Hose:L=480 | |
22 | 90°elbow:NPT2 1/2 | |
23 | American standard (item 23) | Bolt:5/8-11UNC-2AX50 |
24 | GB/T93-1987 | Washer : 16 |
25 | GB/T848-1985 | Flat Washer : 16 |
26 | American standard (item 26) | Bolt:1/2-13UNC-2AX40 |
27 | GB/T93-1987 | Washer : 14 |
28 | GB/T96-1985 | Flat Washer : 14 |
29 | American standard (item 29) | Bolt:1/2-13UNC-2AX60 |
30 | American standard (item 30) | Nut:1/2-13UNC-2B |
31 | 32PL | Spraying pump |
32 | Q11F-16 | Internal thread ball valve : 1-11 1/2NPSC |
33 | GH3101-08.16.00 | Support |
8 GH3101-10.00 Breather cap | ||
No. | Drawing No. | Name |
1 | GH3101-10.01 | Baffle |
2 | GH3101-10.02 | Connector |
3 | GH3101-10.03 | Press plate for filter screen |
4 | GH3101-10.04 | Brass wire screen |
5 | GH3101-10.05 | Upper cover |
9 GH3101-15.00Oil level gauge | ||
No. | Drawing No. | Name |
1 | GH3101-15.01.00 | dipstick |
2 | GH3101-15.02 | Short connector:NPT 1/2 |
3 | GH3101-15.03 | elbow:NPT 1/2 |
10 GH3101-17.00Clean out cover | ||
No. | Drawing No. | Name |
1 | Cover plate assembly:Φ152.4X12.7 | |
2 | GH3101-17.01 | Connector :NPT3/4 |
3 | GH3101-17.02 | Screw plug:NPT3/4 |
11 GH3101-22.00Draining filter assembly | ||
No. | Drawing No. | Name |
1 | GH3101-22.01.00 | Filter screen assembly |
2 | GH3101-22.02 | shell |
3 | GB/T3452.1-1992 | O ring:165X7G |
4 | GH3101-22.03 | bolt:1 1/2-8UN (12UNF)-2AX128 |
5 | GH3101-22.04 | Nut:1 1/2-8UN-2B(SPL) |
12 GH3101-27.00 KB-75Surge damper | ||
No. | Drawing No. | Name |
1 | GH3101-27.01 | Ring gasket:R39 |
2 | GH3101-27.02 | Base plug |
3 | GH3101-27.03.00 | Air bag |
4 | GH3101-27.04.00 | Shell assembly |
5 | GH3101-27.05 | Cover |
6 | GH3101-27.06 | T-joint:NPT1/4 |
7 | GH3101-27.07 | Connector :NPT1/4 |
8 | GH3101-27.08.00 | Guard, pressure gauge |
9 | GH3101-27.09.00 | Bleeder valve |
10 | Y-60 | Pressure gauge: 0—25MPa(0—3630psi) |
11 | JZR3-L8 | Check valve |
12 | GH3101-27.10 | Washer |
13 | GH3101-27.11.00 | Charging Hose of Damper |
13 GH3101-28.00A JA-3 Relieve valve | ||
No. | Drawing No. | Name |
1 | GH3101-28.01 | Connector |
2 | GH3101-28.02 | Retainer ring |
3 | GH3101-28.03.00 | Piston assembly |
4 | GH3101-28.04 | Valve Body |
5 | GH3101-28.05 | Piston rod |
6 | GH3101-28.06 | Buffer pad |
7 | GH3101-28.07 | Elastic straight pin |
8 | GH3101-28.08 | Lock spring |
9 | GH3101-28.09 | Safety guard |
10 | GH3101-28.10 | Plate, shear pin |
11 | GH3101-28.11 | Shear pin |
12 | GH3101-28.12A | Warning plate |
13 | GH3101-28.13 | Pin |
14 | GH3101-28.14 | Spacer ring |
15 | GH3101-28.15A | Nameplate |
16 | GB/T91-1986 | pin:4X26 |
17 | American standard (item 17) | Screw :8 (0.164)-32UNC-2AX16 |
18 | American standard (item 18) | Nut:8(0.164)-32UNC-2B |
19 | American standard (item 19) | Bolt:3/8-16UNC-2AX110 |
20 | American standard (item 20) | Nut:3/8-16UNC-2B(SPL) |
21 | American standard (item 21) | Screw :5 (0.125)-40UNC-2AX8 |
14 GH3161-22.00BElbow assembly | ||
No. | Drawing No. | Name |
1 | GH3161-22.01.00A | Seat, pressure gauge |
2 | GH3161-22.02.00B | Safety valve seat |
3 | GH3161-22.03.00A | Discharging cross |
4 | GH3161-22.04 | bolt:1 1/16-8UN-2AX170 |
5 | GH3161-22.05 | Nut:1 1/16-8UN-2BCSPL) |
6 | GH3161-22.06 | Ring gasket:R27 |
7 | 277 | Sealant:277 |