Description
| MI SWACO BALANCED ELLIPTICAL MOTION SHAKER MODEL: BEM3 PARTS LIST | |
| FINAL ASSEMBLY Refer to figures 5-1 through 5-7 for the parts lists and illustrations for the final assembly of a standard Balanced Elliptical Motion Shaker | |
| DESCRIPTION | PART NUMBER |
| Skid Weldment | EM3C20019-01 |
| Possum Belly Weldment | EM3C20014-01 |
| Left Hand Elevator Bracket | LM3C00247-01 |
| Right Hand Elevator Bracket Weldment | LM3C00248-01 |
| Spring Spool Bracket, Lower Front Opposite Motor Side | LM3C00252-01 |
| Spring Spool Bracket, Lower Front Motor Side | LM3C00251-01 |
| Elevator Bracket Weldment | LM3C00104 |
| Upper Spring Spool | RS3K80340 |
| Rear Spring Spool Weldment | LM3C00057 |
| Spring | LM3S00079 |
| Upper Spring Spool Weldment, Front Right | LM3C00096 |
| Upper Spring Spool Weldment, Front Left | LM3C00041 |
| Upper Spring Spool Weldment | RS3C90036-00AD |
| Discharge Gate | EM3C20034-01 |
| Basket Weldment | EM3C10527-02AE |
| Mounting Angle Bracket Weldment | EM3C20025-01 |
| Weir Gate Bar | LM3S10236-01 |
| Flatwasher, 3/4″, SST. | 05-160 |
| Cotter Pin, 1/8 X 1-1/2″ Long , SST | 06-113 |
| Weir Gate Weldment | LM3S10233 |
| Bearing, Type FB-16 (See Figure 5-4) | 09-544 |
| Elevator Rod Weldment (See Figure 5-4) | LM3S00131 |
| Rapid Action Tensioner | EM3S90150-01 |
| Cable Shield (See Figure 5-3) | EM3S90124-01 |
| Motor, 2 HP | See Sales Order |
| Skirt | LM3N10010 |
| Flatwasher, 3/8″, SST | 05-225 |
| Split Lockwasher, 3/8″, SST | 05-109 |
| Hex Nut, 3/8″, SST. | 03-144 |
| Hex Head Capscrew, 3/8-NC X 1-1/4″ Long, SST | 04-585 |
| Split Lockwasher, 3/4″, SST | 05-236 |
| Hex Nut, 3/4″, SST | 03-404 |
| Hex Head Capscrew, 3/4-NC X 2″ Long, SST | 04-1429 |
| Flatwasher, 1/2″, SST | 05-173 |
| Hex Head Capscrew, 1/2-NC x 1” Long SST | 04-1430 |
| Split Lockwasher, 1/2″, SST | 05-103 |
| Hex Nut, 1/2-NC, SST | 03-142 |
| Hex Head Capscrew, M20-1.5 X 90mm LG. Grade 10.9 (US equivalent Grade 8), MS | 04-1541 |
| Hex Nut, 5/8-NC, SST. | 03-145 |
| Square Head Bolt, 1/2″ X 1″ Long, SST. Cup Point | 04-1254 |
| Hex Head Capscrew, 1/2-NC X 2″ Long, SST | 04-1431 |
| – | – |
| Cross Screen Strip, SST | EM3S80122-01 |
| Side Screen Strip, Sst | EM3S80121-01 |
| Gasket Clip | 07-332 |
| Hex Head Capscrew 1/2-NC x 1-1/4″, SST | 04-1432 |
| Hex Nut, 1-5 Acme Thread (See Figure 5-7) | LM3K00148 |
| Rubber Crown, 34″ Long | LM3N00076 |
| Draw Bar Weldment | EM3S00005-01 |
| Safety Pendant | LM3C00103 |
| Handle Weldment (Shipped Loose) (See Figure 5-7) | LM3C02016 |
| – | – |
| Hex Head Capscrew 1-NC x 2-1/2″ Long, MS, Full Thread | 04-1422 |
| Flatwasher, 1″, SST | 05-220 |
| Shipping Bracket Rotating Plate | EM3C10547-01 |
| Electrical Installation Kit | LM3K00257 |
| Starter, Dual Motor | See Sales Order |
| Grommet | 00-1288 |
| Electrical Mounting Bracket | EM3C90123-01 |
| Hex Head Capscrew 3/8-NC x 1-1/2″ Long, SST | 04-485 |
| Skirt Strip (See Figure 5-1) | LM3S10009 |
| 8″ Pipe Flange Gasket (See Figure 5-6) | EM3N90126-01 |
| 8″ Blank Flange (See Figure 5-6) | EM3S90125-01 |
| Hex Head Capscrew 3/4-NC x 2-1/2″ Long, SST | 04-939 |
| (See Figure 5-6) | |
| Flatwasher, 1/4″, SSTot Shown) | 05-162 |
| Split Lockwasher, 1/4”, SST (Not Shown) | 0-235 |
| Hex Head Capscrew 1/4-NC x 1-1/4″ Long, SST | 04-1434 |
| (Not Shown) | |
| – | – |
| Split Lockwasher, 1″, SST | 05-265 |
| Weir Gate Stop Washer | EM3C90138-01 |
| Hex Head Capscrew 1/2-NC x 1-1/2″ Long, SST | 04-997 |
| Motor Rotation Label | EM3K00251 |
| Shipping Bracket Tag | RS3K91195 |
| Cable Strap | 01-1699 |
| Motor Mounting Washer | 05-244 |
| AVAILABLE SCREENS | |
| 24 Mesh Three Layer Screen | JBM3MK024L |
| 38 Mesh Three Layer Screen | JBM3MK038L |
| 50 Mesh Three Layer Screen | JBM3MK050L |
| 70 Mesh Three Layer Screen | JBM3MK070L |
| 84 Mesh Three Layer Screen | JBM3MK084L |
| 110 Mesh Three Layer Screen | JBM3MK110L |
| 140 Mesh Three Layer Screen | JBM3MK140L |
| 175 Mesh Three Layer Screen | JBM3MK175L |
| 210 Mesh Three Layer Screen | JBM3MK210L |
| 230 Mesh Three Layer Screen | JBM3MK230L |
| 250 Mesh Three Layer Screen | JBM3MK250L |
| 325 Mesh Three Layer Screen | JBM3MK325L |
| 84 XR Premium Mesh Screen | JBM3XR084L |
| 110 XR Premium Mesh Screen | JBM3XR110L |
| 140 XR Premium Mesh Screen | JBM3XR140L |
| 175 XR Premium Mesh Screen | JBM3XR175L |
| 210 XR Premium Mesh Screen | JBM3XR210L |
| 250 XR Premium Mesh Screen | JBM3XR250L |
| MI SWACO MONGOOSE PRO SHAKER PARTS LIST | |
| RIG CRITICAL SPARE PARTS LIST FOR MONGOOSE PRO SHALE SHAKER | |
| Description | Part Number |
| KIT, MOTOR 2.5 HP, FIXED WEIGHT (220-240/440-480V 60Hz/3/1800 70 FRAME) | 9870525 |
| KIT, MOTOR 2.5 HP, FIXED WEIGHT (220-240/380-415V 50/3/1500 70 FRAME) | 9870526 |
| KIT, MOTOR 2.5 HP, FIXED WEIGHT (575-600V 60/3/1800 70 FRAME) | 9870527 |
| SPRING COIL 7″ | 9360007 |
| SPRING SPOOL | BM6K80290 |
| GASKET, MONGOOSE FLAT PANEL SCREEN | 5837001 |
| WEDGE, MONGOOSE SCREEN CLAMPING | 5895001 |
| GROMMET RECT NYLON WHITE | 07-443 |
| #8 FLATHEAD SHEETMETAL SCREW W/SQUARE DRIVE | 1441471 |
| CONTACTOR, REVERSING | 7150018 |
| RELAY, THERMAL OVERLOAD (5.5-7.5A) 380V, 460V | 7152032 |
| RELAY, THERMAL OVERLOAD (3.5-4.8A) 575V | 7152033 |
| RELAY, THERMAL OVERLOAD (9.0-12.5A) 240V | 7152034 |
| TRANSFORMER | 7790017 |
| (460V) | |
| TRANSFORMER | 7790019 |
| (575V) | |
| TRANSFORMER | 7790018 |
| (380V) | |
| POWER DISTRIBUTION BLOCK | 7150014 |
| EMITTER PLASTIC VCI-105 (Not Shown in Drawing) | 8265105 |
| RELAY BASE | 7150016 |
| RELAY, DPDT 10A 120VAC | 7150015 |
| CIRCUIT BREAKER, 2 POLE, 1A | 7510037 |
| CIRCUIT BREAKER, 1 POLE, 3A | 7510038 |
| CIRCUIT BREAKER SIZE SO 5.5-8A [SIEMENS 3RV10 21 1HA10] (ATEX ONLY) | 7510024 |
| AUX CONTRACT BLOCK 1NO+1NC (ATEX ONLY) | 7573502 |
| TRANSFORMER I 0-400/440/460V II 0-110 100 VA 50/60 Hz (ATEX ONLY) | 7717020 |
| CONTACTOR 5.5kW 110 VAC (ATEX ONLY) | 7573503 |
| RIG CRITICAL SPARE PARTS LIST FOR DUAL MONGOOSE PRO SHALE SHAKERS | |
| Description | Part Number |
| RIG CRITICAL SPARE PARTS LIST FOR MONGOOSE PRO (DUAL QTY) | Refer to Table 7.1 |
| GASKET, FEEDER BOX COMMON POSSUM BELLY | 3914037 |
| GASKET, POSSUM BELLY TRANSITION DUAL SHAKER | 3914036 |
| ROLL PIN1/4″ DIAMETER X 1.50 LG | 06-247 |
| TABLE 7.3: RIG CRITICAL SPARE PARTS LIST FOR TRIPLE MONGOOSE PRO SHALE SHAKERS | |
| Description | Part Number |
| RIG CRITICAL SPARE PARTS LIST FOR MONGOOSE PRO (TRIPLE QTY) | Refer to Table 7.1 |
| ROLL PIN % DIAMETER X 1.50 LG | 06-247 |
| HHCS M12 X 70 MM LG WITH FULL THREADS | 04-1509 |
| GASKET, FULL FACE ANSI FLANGE, 150 LBS., 10″ | 3916067 |
| HHCS M24-3.0 X 90 MM, BLACK TRICHROMATE PLATED | 1493003 |
| HEX NUT M24 | 03-412 |
| GASKET, TRANSITION BYPASS POSSUM BELLY | 3914035 |
| GASKET, FEEDER BOX COMMON POSSUM BELLY | 3914037 |
| TABLE 7.4: RIG CRITICAL SPARE PARTS LIST FOR QUAD MONGOOSE PRO SHALE SHAKERS | |
| Description | Part Number |
| RIG CRITICAL SPARE PARTS LIST FOR MONGOOSE PRO (QUAD QTY) | Refer to Table 7.1 |
| FLAT WASHER M20 | 05-294 |
| HHCS M20-2.5 x 90 mm LG, GRADE 10.9, BLACK TRICHROMATE PLATED | 04-1684 |
| LOCK WASHER SCHNORR M20 MARTIN #513014 | 05-244 |
| HEX NUT M20-2.5 BLACK TRICHROMATE PLATED | 03-435 |
| GASKET, FULL FACE ANSI FLANGE 150 LBS., 10″ | 3916067 |
| BUTTERFLY VALVE 12″ WAFER BODY W/ HANDLE & 10 POSITION THROTTLE PLATE | 5647011 |
| BUTTERFLY VALVE 10″ WAFER BODY W/ HANDLE & 10 POSITION THROTTLE PLATE | 5644042 |
| FLAT WASHER M24 REGULAR | 05-308 |
| HHCS M24-3 X 110mm LG, GRADE 8.8, BLACK TRICHROMATE PLATED | 1493001 |
| SPLIT LOCK WASHER M24 | 05-309 |
| HEX NUT M24 | 03-412 |
| HHCS M24-3.0 X 180 MM, GRADE 8.8, BLACK TRICHROMATE PLATED | 1493002 |
| HHCS M24-3.0 X 90 MM, BLACK TRICHROMATE PLATED | 1493003 |
| TABLE 7.5: FIXED WEIGHT MOTOR KIT PARTS LIST* | |
| Description | Part Number |
| MOTOR 2.5 HP 220-240/440-480V, FIXED WEIGHT 60/3/1800 70 FRAME | 9870525 |
| MOTOR 2.5 HP 220-240/380-415V, FIXED WEIGHT 50/3/1500 70 FRAME | 9870526 |
| MOTOR 2.5 HP 575-600V, FIXED WEIGHT 60/3/1800 70 FRAME | 9870527 |
| LOCK WASHER SCHNORR M20 MARTIN #513014 | 05-244 |
| WASHER FLAT BLACKENED F436 X 1-15/32″ OD HARDENED | 1345015 |
| HHCS PLATED M20-1.5 X 120mm LG GRADE 10.9 | 04-1704 |
| NUT HEX PLTD M20 X 1.5, 35mm GRD 10.9 BLACK TRICHROMATE PLTD | 1305055 |
| TABLE 7.6: SWING WEIGHT MOTOR KIT PARTS LIST | |
| Description | Motor Kit Number |
| MOTOR 2.5 HP 220-240/440-480V, SWING WEIGHT 60/3/1800 70 FRAME | 9870528 |
| MOTOR 2.5 HP 220-240/380-415V, SWING WEIGHT 50/3/1500 70 FRAME | 9870529 |
| MOTOR 2.5 HP 575-600V, SWING WEIGHT 60/3/1800 70 FRAME | 9870530 |
| LOCK WASHER SCHNORR M20 MARTIN #513014 | 05-244 |
| WASHER FLAT BLACKENED F436 X 1-15/32″ OD HARDENED | 1345015 |
| HHCS PLATED M20-1.5 X 120mm LG GRADE 10.9 | 04-1704 |
| NUT HEX PLATED M20 X 1.5, 35mm GRD 10.9 BLACK TRICHROMATE PLTD | 1305055 |