Description
Mongoose mud cleaner Parts list
| Mongoose PT Mud Cleaner | |
| 9671901-01 | |
| 9671902-01, -02 | |
| 9671903-01, -02 | |
| 9671904-01, -02 | |
| 9671905-01, -02, -03, -04, -05 | |
| Mud Cleaner GA Drawing per Assembly 9671901-01 | |
| Mud Cleaner GA Drawing per Assembly 9671902-01 | |
| Mud Cleaner GA Drawing per Assembly 9671902-02 | |
| Mud Cleaner GA Drawing per Assembly 9671903-01 | |
| Mud Cleaner GA Drawing per Assembly 9671903-02 | |
| Mud Cleaner GA Drawing per Assembly 9671904-01 | |
| Mud Cleaner GA Drawing per Assembly 9671904-02 | |
| Mud Cleaner GA Drawing per Assembly 9671905-01 | |
| Mud Cleaner GA Drawing per Assembly 9671905-02 | |
| Mud Cleaner GA Drawing per Assembly 9671905-03 | |
| Mud Cleaner GA Drawing per Assembly 9671905-04 | |
| Mud Cleaner GA Drawing per Assembly 9671905-05 | |
| Mongoose Mud Cleaner per Ass’y 9671901-01 | |
| Mongoose Mud Cleaner per Ass’y 9671902-01 | |
| Mongoose Mud Cleaner per Ass’y 9671902-02 | |
| Mongoose Mud Cleaner per Ass’y 9671903-01 | |
| Mongoose Mud Cleaner per Ass’y 9671903-02 | |
| Mongoose Mud Cleaner per Ass’y 9671904-01 | |
| Mongoose Mud Cleaner per Ass’y 9671904-02 | |
| Mongoose Mud Cleaner per Ass’y 9671905-01 | |
| Mongoose Mud Cleaner per Ass’y 9671905-02 | |
| Electrical (Motors) | |
| Three Phase Induction Motor | 60 CDX18-5900 |
| Three Phase Induction Motor | 60 CDX18-2100 |
| Screen Selection Chart | |
| Part numbers for screens available for the Mongoose PT Shaker are provided below. | |
| Mesh | Part Number |
| 10 | JMONMK010P |
| 20 | JMONMK020P |
| 30 | JMONMK030P |
| 40 | JMONMK040P |
| 24 | JMONMK024P |
| 38 | JMONMK038P |
| 50 | JMONMK050P |
| 70 | JMONMK070P |
| 84 | JMONMG084P |
| 110 | JMONMG110P |
| 140 | JMONMG140P |
| 175 | JMONMG175P |
| 210 | JMONMG210P |
| 250 | JMONMG250P |
| 84 | JMONMX084P |
| 110 | JMONMX110P |
| 140 | JMONMX140P |
| 175 | JMONMX175P |
| 210 | JMONMX210P |
| 250 | JMONMX250P |
| 84 | JMONHC084P |
| 110 | JMONHC110P |
| 140 | JMONHC140P |
| 175 | JMONHC175P |
| 210 | JMONHC210P |
| 250 | JMONHC250Pj |
| 325 | JMONHC325P |
| Control Panel 3 Motor 380V/50 Hz Parts List (MI-Swaco #: 6930007) | |
| Description | MI-Swaco |
| Reset Buttons | 7573290 |
| Selector Switch | 7573106 |
| E-Stop “Push-Pull” | 7573105 |
| Transformer (380V) | 7790016 |
| Fuse Block | 7519002 |
| Timer | 7117005 |
| Overload Blocks | 7150002 |
| Contactors- Non. Rev. | 7150001 |
| Contactor-Reversing | 6930009 |
| Mechanical Push Rod | 8071702 |
| Overload Heaters | 7152606 |
| Overload Heaters | 7152605 |
| Fuse | 7518022 |
| Fuses | 7518020 |
| Large Motor | |
| Description | MI-Swaco P/N |
| HHCS M20-1.5 x 120 mm lg., Grade 10.9 Yellow Chromate | 1407169 |
| Motor Washer | BM6S80043-01 |
| Lockwasher Schnorr M20 | 05-244 |
| Nut, Hex M20-1.5, Grade 10.9 Yellow Chromate | 1305055 |
| Small Motor | |
| HHCS M16-1.5 x 100 mm lg., Grade 10.9 Yellow Chromate | 1407144 |
| Washer, 16 mm Motor | 9671682 |
| Lockwasher Schnorr M16 | 05-248 |
| Nut, Hex M16-1.5, Grade 10.9 Yellow Chromate | 1305040 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9671901-01 (Shaker Mongoose PT 10T4 Mud Cleaner 3 Mtr. 380V, 50 Hz) | |
| Description | MI-Swaco P/N |
| Shaker Mongoose PT Effluent Skid Less Motor, Controls | 9671843 |
| Control Ass’y Kit Mongoose PT (3) Mtr. 380V, 50 Hz | 9671688-02 |
| Mtr. 1.75 Hp 220-240/380-415V, 50/3/1500 | EM3C00010 |
| Mtr. 220/380V 0.60 Hp 50 Hz XP Vibrator | 6905003 |
| 10T4 D-Silter Ass’y w/ Header Box Mongoose PT Mud | 9671906 |
| Cleaner | |
| Nameplate ID Product M-I Swaco | 9650360 |
| Pop Rivet 1/8” D 3/16-1/4 Grip, 304 SS | 07-409 |
| Bracket Shipping D-Silter, D-Sander Mongoose PT | 9671809 |
| Plate, Cover 10T4 D-Silter PT Mongoose Mud Cleaner | 9671839 |
| Drawings and Parts List Control Assembly Kit (9671688-02) | |
| Description | MI-Swaco P/N |
| Plate, Control Panel Mounting Adapter | 9671689 |
| Starter Assembly 380 V, 50 Hz | 6930007 |
| Mount Vibration Donut | 5859378 |
| Lockwasher, 1” | 05-110 |
| Conduit Locknut, %” NPT | 01-184 |
| Cord Grip Straight | 01-106 |
| Reducer Bushing, %” MPT x ^ FPT | 5008937 |
| Cable Connector, NPT .51-.81 Dia. Armored | 6560030 |
| Conduit Elbow, 90 Deg. % x % FPT | 5030937 |
| Tie Cable | 8087255 |
| Decal, Arrow Rotation | 9650367 |
| Cable Armored 4 Conductor, UL Approved | 7906218 |
| Flatwasher, M12 Regular, SST | 05-305 |
| Lockwasher, M12 Regular, SST | 05-306 |
| Hex Nut, M12, SST | 03-415 |
| HHCS, M12 x 80 mm Lg., SST | 04-1147 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9671843 (Mongoose PT Effluent Skid Less Motors and Controls) | |
| Description | MI-Swaco P/N |
| Skid Weldment Mongoose Effluent | 9671790 |
| Basket Assembly, Mongoose PT | 9671738-01 |
| HHCS M12 x 45 mm, SS | 04-1270 |
| Jack Assembly Lifting | 9671681 |
| Nut Hex Plt. M20-1.5 Grade 10.9, Yellow Chromate | 1305055 |
| Screw Hex Hd. Plt. M20-1.5 x 120 mm, Yellow Chromate | 1407169 |
| Gate, Skid Slide Mongoose Effluent Design | 9671815 |
| Bracket, Shipping Metric | 9671742 |
| Flatwasher M20 Metric, SS | 05-296 |
| Lockwasher M20 Metric, SS | 05-307 |
| Screw Hex Hd, SS, M20 x 45 mm | 1493215 |
| Flatwasher M12 Metric, SS | 05-305 |
| Lockwasher M12 Split, SS | 05-306 |
| Decal MI-Swaco | 8420202 |
| Hex Nut M12 Metric, SS, M12 x 1.75, SS | 03-415 |
| Weldment, Spring Spool Mongoose Flat Panel | 9671679 |
| Indicator Pointer Mongoose PT Bolt Flg. Design | 9671683 |
| Plate, Right Indicator | 9671744 |
| Plate, Left Indicator | 9671745 |
| CVR/Plug- I/O 6” Dia. | S48K00827-NL |
| Spring Coil 7 inch Inline Shaker | 9360007 |
| Lockwasher Schnorr M20 Metric Motor Washer | 05-244 |
| Motor Washer, SS | BM6Y80043-01XB |
| Washer, 16 mm Motor | 9671682 |
| Lockwasher Schnorr, M16 Metric Motor Washer | 05-248 |
| Screw Hex HD Plt. M16-1.5 x 100 mm, Grd. 10.9 Yellow | 1407144 |
| Chromate | |
| Washer Spring Isolation High Grade Nitrile 70 Shore A | 5895002 |
| Nut Hex Plt. M16-1.5, Grd. 10.9 Yellow Chromate | 1305040 |
| Nameplate MI-Swaco | 9650360 |
| Pop Rivet 1/8” D 3/16-1/4” Grip | 07-409 |
| Cover, Weld Flange 10” PT Mongoose | 9671652-01 |
| Gasket Ring ANSI Flng RF 150 LB 10 in | 3916067 |
| HHCS M24-3.0 x 90 mm MS, Yellow Chromate, GR 8.8 | 1493003 |
| Hex Nut M24, Metric, SS | 03-412 |
| Flatwasher M24, Metric, SS | 05-308 |
| Lockwasher M24 Split, SS | 05-309 |
| Label, Lift Point | BM6K80098 |
| Label, “PE” Protective Earth | BM6K80097 |
| Boot, Spring | 5804004 |
| Decal Shipping Bracket Position | 9650511 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9671738-01 (Basket Assembly, Mongoose PT MS Basket / 304 SS HDW (Metric) | |
| Description | MI-Swaco P/N |
| Basket Weldment Mongoose PT | 9671610 |
| Cover, Removable Mongoose Flat Panel | 9671637-02 |
| Wedge Screen Clamping Mongoose 75 Shore D Polyurethane Black | 5895001 |
| Flatwasher M10 Metric, SS | 05-277 |
| HHCS M10 x 30 Metric, SS | 04-1103 |
| Lockwasher M10 Split, SS | 05-270 |
| Hex Nut M10 Metric, SS | 03-229 |
| Bar, Skirt Retainer | 9671638-02 |
| Skirt Mongoose Feed End High Grade Nitrile 80 Shore A | 5873004 |
| Gasket Compression “P” Screen Bed Mongoose | 5837001 |
| Weldment, Screen Gasket Hold Down Bar | 9671640 |
| Drip Lip Basket Mongoose | 9671925 |
| Grommet Screw .273 Sq. Panel Hole, Panel Thk. 0.31-.156 | 07-415 |
| Screw Flat HD CRSK Sheet Metal 8-32 x 1” Lg., | 1441471 |
| SS,Sq. Head | |
| Label, Crush Hands | BM6K80100 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9671906 ( 10T4 D-Silter Assy w/ Header Box Mongoose PT Mud Cleaner) | |
| Description | MI-Swaco P/N |
| Nut Hex Plt. 5/8-11 NC | 1305041 |
| Washer Flat Plt. 5/8 in x 1.31 OD | 1345041 |
| Washer Lock Split Plt. 5/8 in | 1345344 |
| Screw Hex Hd Cap Plt. 5/8-11 NC x 2 | 1407139 |
| Drs #4 x 5/16 304 SS | 1492031 |
| Gauge 0-60 PSI/0-400 KPA 2-1/12 in 1/4 NPT LM | 2422177 |
| Gasket Ring ANSI Flng RF 150 LB. 10 in | 3916067 |
| Cap Grooved End 6 in | 5010134 |
| Cap Grooved End 8 in | 5010135 |
| Cuplng Grooved End 6 in Bolt T-Gskt 1000 PSI | 5015029 |
| Cuplng Grooved End 8 in Bolt T-Gskt 800 PSI | 5015030 |
| Cuplng Grooved End 10 in Bolt T-Gskt 800 PSI | 5015031 |
| Cuplng Grooved End 2 in Snap T-Gskt 300 PSI | 5015052 |
| Cuplng Grooved End 2-1/2 in Snap T-Gskt | 5015053 |
| Plug SQ Hd. Galv. 150 PSI 1 NPT | 5068261 |
| Decal MI-Swaco | 8420200 |
| Clone Twin 4 Urethane Complete w/ 1/2 Apex | 9622220 |
| Manfld Feed D-Silter 10T4 w/o Flange | 9622532 |
| Manfld Overflow D-Silter 10T4 / ALS Mud Cleaner | 9622585 |
| Elbow D-Silter 10T4 Poly 2 in Grooved End | 9622595 |
| Nameplate ID Product | 9650360 |
| Cover, MS Weld Flange 10” PT Mongoose | 9671652-01 |
| Weldment, 10T4 Header Box w/o Flange Mud Cleaner | 9671907 |
| Weldment, Leg Header Box D-Silter 10T4 | 9671914 |
| Weldment, Leg Header Box D-Silter 10T4 | 9671915 |
| Weldment Leg HDR Box Mud Cleaner w/o Bolt on Flange | 9671926 |
| Weldment Leg HDR Box Mud Cleaner w/o Bolt on Flange | 9671927 |
| Plate, Slider Bypass D-Silter PT Mongoose Mud Cleaner | 9671941 |
| Nipple Stub Grooved End 8 in x 5 in Lg. | 9697001-13 |
| Nipple Stub Grooved End 10 in x 5 in Lg. | 9697001-14 |
| Flatwasher M12 Metric 304 SS | 05-305 |
| Flatwasher M24 Metric 304 SS | 05-308 |
| Hex Nut M12 Metric, 304 SS, M12 x 1.75 | 03-415 |
| Hex Nut M24 Metric, 304 SS | 03-412 |
| HHCS M12 x 35 Metric, 304 SS | 04-1105 |
| HHCS M12 x 40 Metric, 304 SS | 04-1106 |
| HHCS M24-3.0 x 90 mm MS, Yellow Chromate Plt. Gr. 10.9 Full Thread | 1493003 |
| CVR/Plug-I/O 6” Dia. High Grade Nitrile 45-70 Shore A Hardiness | S48K00827-NL |
| Lockwasher M12 Split 304 SS | 05-306 |
| Lockwasher M24 Split 304 SS | 05-309 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9622220 (Clone Twin 4” Urethane Complete w/ 1/2” Apex) | |
| Description | MI-Swaco P/N |
| Liner Feed Urethane | 9622221 |
| Valve Apex 1/2” | 9622312 |
| Recommended Spare Parts for 9671901-01 Configuration | |
| Description | MI-Swaco P/N |
| Screen Mesh 10 | JMONMK010P |
| Screen Mesh 20 | JMONMK020P |
| Screen Mesh 30 | JMONMK030P |
| Screen Mesh 40 | JMONMK040P |
| Screen Mesh 24 | JMONMK024P |
| Screen Mesh 38 | JMONMK038P |
| Screen Mesh 50 | JMONMK050P |
| Screen Mesh 70 | JMONMK070P |
| Screen Mesh 84 MAGNUM | JMONMG084P |
| Screen Mesh 110 MAGNUM | JMONMG110P |
| Screen Mesh 140 MAGNUM | JMONMG140P |
| Screen Mesh 175 MAGNUM | JMONMG175P |
| Screen Mesh 210 MAGNUM | JMONMG210P |
| Screen Mesh 250 MAGNUM | JMONMG250P |
| Screen Mesh 84 MX | JMONMX084P |
| Screen Mesh 110 MX | JMONMX110P |
| Screen Mesh 140 MX | JMONMX140P |
| Screen Mesh 175 MX | JMONMX175P |
| Screen Mesh 210 MX | JMONMX210P |
| Screen Mesh 250 MX | JMONMX250P |
| Screen Mesh 84 HC-MAGNUM | JMONHC084P |
| Screen Mesh 110 HC-MAGNUM | JMONHC110P |
| Screen Mesh 140 HC-MAGNUM | JMONHC140P |
| Screen Mesh 175 HC-MAGNUM | JMONHC175P |
| Screen Mesh 210 HC-MAGNUM | JMONHC210P |
| Screen Mesh 250 HC-MAGNUM | JMONHC250P |
| Screen Mesh 325 HC-MAGNUM | JMONHC325P |
| Reset Buttons | 7573290 |
| Selector Switch | 7573106 |
| E-Stop “Push-Pull” | 7573105 |
| Transformer (380V) | 7790016 |
| Fuse Block | 7519002 |
| Timer | 7117005 |
| Overload Blocks | 7150002 |
| Contactors- Non. Rev. | 7150001 |
| Contactor-Reversing | 6930009 |
| Mechanical Push Rod | 8071702 |
| Overload Heaters | 7152606 |
| Description | Ml-Swaco P/N |
| Overload Heaters | 7152605 |
| Fuse | 7518022 |
| Fuses | 7518020 |
| Mtr. 1.75 Hp 220-240/380-415V, 50/3/1500 | EM3C00010 |
| Mtr. 220/380V, 0.60, 50/3/1500 | 6905003 |
| Lockwasher 1 SHKPRF Ext. MS | 05-110 |
| Locknut Electrical 3/4 | 01-184 |
| Cord Grip 3/4 NPT St. .625-.750 Range Alum. Male | 01-106 |
| Bushing Conduit Redcr. EP 3/4 MPT x 1/2 FPT | 5008937 |
| Cnectr Cable EP 1/2 NPT, .51-.81 Dia. Armored | 6560030 |
| Ell. Conduit EP 90 3/4 MPT x 3/4 FPT | 5030937 |
| Cable Armored 4 Cond. 12 AWG w\ Jacket | 7906218 |
| Jack Assembly Lifting | 9671681 |
| Nut Hex Plt. M20-1.5 Grade 10.9, Yellow Chromate | 1305055 |
| Screw Hex Hd. Plt. M20-1.5 x 120 mm, Yellow Chromate | 1407169 |
| CVR/Plug- I/O 6” Dia. | S48K00827-NL |
| Spring Coil 7 inch Inline Shaker | 9360007 |
| Lockwasher Schnorr M20 Metric Motor Washer | 05-244 |
| Motor Washer, SS | BM6Y80043-01XB |
| Washer, 16 mm Motor | 9671682 |
| Lockwasher Schnorr, M16 Metric Motor Washer | 05-248 |
| Screw Hex HD Plt. M16-1.5 x 100 mm, Grd. 10.9 Yellow Chromate | 1407144 |
| Washer Spring Isolation High Grade Nitrile 70 Shore A | 5895002 |
| Nut Hex Plt. M16-1.5, Grd. 10.9 Yellow Chromate | 1305040 |
| Gasket Ring ANSI Flng RF 150 LB 10 in | 3916067 |
| Boot, Spring | 5804004 |
| Wedge Screen Clamping Mongoose 75 Shore D Polyurethane Black | 5895001 |
| Skirt Mongoose Feed End High Grade Nitrile 80 Shore A | 5873004 |
| Gasket Compression “P” Screen Bed Mongoose | 5837001 |
| Weldment, Screen Gasket Hold Down Bar | 9671640 |
| Grommet Screw .273 Sq. Panel Hole, Panel Thk. 0.31-.156 | 07-415 |
| Screw Flat HD CRSK Sheet Metal 8-32 x 1” Lg., SS, Sq. Head | 1447471 |
| Gauge 0-60 PSI / 0-400 KPa 2-1/2 in 1/4 NPT LM | 2422177 |
| Gasket Ring ANSI Flng RF 150 LB, 10 in | 3916067 |
| Cap Grooved End 6 in | 5010134 |
| Cap Grooved End 8 in | 5010135 |
| Cuplng Grooved End 6 in Bolt T-Gskt 1000 psi | 5015029 |
| Cuplng Grooved End 8 in Bolt T-Gskt 800 psi | 5015030 |
| Cuplng Grooved End 10 in Bolt T-Gskt 800 psi | 5015031 |
| Cuplng Grooved End 2 in Bolt T-Gskt 300 psi | 5015052 |
| Cuplng Grooved End 2-1/2 in Snap T-Gskt | 5015053 |
| Plug SQ Hd. Galv. 150 psi 1 NPT | 5068261 |
| Clone Twin 4 Urethane Complete w/ 1/2 Apex | 9622220 |
| Manfld Feed D-Silter 10T4 w/o Flng | 9622532 |
| Manfld Overflow D-Silter 10T4 / ALS Mud Cleaner | 9622585 |
| Elbow D-Silter 10T4 Poly 2 in Grooved End | 9622595 |
| Nipple Stub Grooved End 6 in x 5 in Lg. | 9697001-12 |
| Nipple Stub Grooved End 8 in x 5 in Lg. | 9697001-13 |
| CVR/Plug – I/O 6” Dia. | S48K00827-NL |
| Liner Feed Urethane | 9622221 |
| Valve Apex 1/2” | 9622312 |
| Assembly 9671902-01: | Shaker Mongoose PT 2-12/10T4 Mud Cleaner |
| 3 Motor 380V, 50 Hz | |
| Assembly 9671902-02: | Shaker Mongoose PT 3-12/10T4 Mud Cleaner |
| 3 Motor 380V, 50 Hz | |
| Assembly 9671902-01 (Shaker Mongoose PT 2-12/10T4 Mud Cleaner 3 Mtr. 380V, 50 Hz) | |
| Description | MI-Swaco P/N |
| Shaker Mongoose PT Effluent Skid Less Motor, Controls | 9671843 |
| Control Assembly Kit Mongoose PT (3) Mtr. 380V, 50 Hz | 9671688-02 |
| Mtr. 1.75 Hp 220-240/380-415V, 50/3/1500 | EM3C00010 |
| Mtr. 220/380V 0.60 Hp 50 Hz XP Vibrator | 6905003 |
| 10T4 D-Silter Assembly w/ Header Box Mongoose PT Mud Cleaner | 9671906 |
| 2-12, D-Sander Assembly Mongoose PT Mud Cleaner | 9671947 |
| Nameplate ID Product M-I Swaco | 9650360 |
| Pop Rivet 1/8” D 3/16-1/4 Grip, 304 SS | 07-409 |
| Bracket Shipping D-Silter, D-Sander Mongoose PT | 9671809 |
| Weldment, Trough 2-12 D-Sander PT Mongoose Mud Cleaner | 9671955 |
| Assembly 9671902-02 (Shaker Mongoose PT 3-12/10T4 Mud Cleaner 3 Mtr. 380V, 50 Hz) | |
| Description | MI-Swaco P/N |
| Shaker Mongoose PT Effluent Skid Less Motor, Controls | 9671843 |
| Control Assembly Kit Mongoose PT (3) Mtr. 380V, 50 Hz | 9671688-02 |
| Mtr. 1.75 Hp 220-240/380-415V, 50/3/1500 | EM3C00010 |
| Mtr. 220/380V 0.60 Hp 50 Hz XP Vibrator | 6905003 |
| 10T4 D-Silter Assembly w/ Header Box Mongoose PT Mud | 9671906 |
| Cleaner | |
| D-Sander 3-12 Stand w/ Clones Mongoose PT Mud Cleaner | 9671954 |
| Nameplate ID Product M-I Swaco | 9650360 |
| Pop Rivet 1/8” D 3/16-1/4 Grip, 304 SS | 07-409 |
| Bracket Shipping D-Silter, D-Sander Mongoose PT | 9671809 |
| Weldment, Trough 3-12 D-Sander PT Mongoose Mud Cleaner | 9671960 |
| Drawings and Parts List Control Assembly Kit (9671688-02) | |
| Description | MI-Swaco P/N |
| Plate, Control Panel Mounting Adapter | 9671689 |
| Starter Assembly 380 V, 50 Hz | 6930007 |
| Mount Vibration Donut | 5859378 |
| Lockwasher, 1” | 05-110 |
| Conduit Locknut, %” NPT | 01-184 |
| Cord Grip Straight | 01-106 |
| Reducer Bushing, %” MPT x FPT | 5008937 |
| Cable Connector, ^ NPT .51-.81 Dia. Armored | 6560030 |
| Conduit Elbow, 90 Deg. % x % FPT | 5030937 |
| Tie Cable | 8087255 |
| Decal, Arrow Rotation | 9650367 |
| Cable Armored 4 Conductor, UL Approved | 7906218 |
| Flatwasher, M12 Regular, SST | 05-305 |
| Lockwasher, M12 Regular, SST | 05-306 |
| Hex Nut, M12, SST | 03-415 |
| HHCS, M12 x 80 mm Lg., SST | 04-1147 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9671843 (Mongoose PT Effluent Skid Less Motors and Controls) | |
| Description | MI-Swaco P/N |
| Skid Weldment Mongoose Effluent | 9671790 |
| Basket Assembly, Mongoose PT | 9671738-01 |
| HHCS M12 x 45 mm, SS | 04-1270 |
| Jack Assembly Lifting | 9671681 |
| Nut Hex Plt. M20-1.5 Grade 10.9, Yellow Chromate | 1305055 |
| Screw Hex Hd. Plt. M20-1.5 x 120 mm, Yellow Chromate | 1407169 |
| Gate, Skid Slide Mongoose Effluent Design | 9671815 |
| Bracket, Shipping Metric | 9671742 |
| Flatwasher M20 Metric, SS | 05-296 |
| Lockwasher M20 Metric, SS | 05-307 |
| Screw Hex Hd, SS, M20 x 45 mm | 1493215 |
| Flatwasher M12 Metric, SS | 05-305 |
| Lockwasher M12 Split, SS | 05-306 |
| Decal MI-Swaco | 8420202 |
| Hex Nut M12 Metric, SS, M12 x 1.75, SS | 03-415 |
| Weldment, Spring Spool Mongoose Flat Panel | 9671679 |
| Indicator Pointer Mongoose PT Bolt Flg. Design | 9671683 |
| Plate, Right Indicator | 9671744 |
| Plate, Left Indicator | 9671745 |
| CVR/Plug- I/O 6” Dia. | S48K00827-NL |
| Spring Coil 7 inch Inline Shaker | 9360007 |
| Lockwasher Schnorr M20 Metric Motor Washer | 05-244 |
| Motor Washer, SS | BM6Y80043-01XB |
| Washer, 16 mm Motor | 9671682 |
| Lockwasher Schnorr, M16 Metric Motor Washer | 05-248 |
| Screw Hex HD Plt. M16-1.5 x 100 mm, Grd. 10.9 Yellow | 1407144 |
| Chromate | |
| Washer Spring Isolation High Grade Nitrile 70 Shore A | 5895002 |
| Nut Hex Plt. M16-1.5, Grd. 10.9 Yellow Chromate | 1305040 |
| Nameplate MI-Swaco | 9650360 |
| Pop Rivet 1/8” D 3/16-1/4” Grip | 07-409 |
| Cover, Weld Flange 10” PT Mongoose | 9671652-01 |
| Gasket Ring ANSI Flange RF 150 LB 10 in | 3916067 |
| HHCS M24-3.0 x 90 mm MS, Yellow Chromate, GR 8.8 | 1493003 |
| Hex Nut M24, Metric, SS | 03-412 |
| Flatwasher M24, Metric, SS | 05-308 |
| Lockwasher M24 Split, SS | 05-309 |
| Label, Lift Point | BM6K80098 |
| Label, “PE” Protective Earth | BM6K80097 |
| Boot, Spring | 5804004 |
| Decal Shipping Bracket Position | 9650511 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9671738-01 (Basket Assembly, Mongoose PT MS Basket / 304 SS HDW (Metric) | |
| Description | MI-Swaco P/N |
| Basket Weldment Mongoose PT | 9671610 |
| Cover, Removable Mongoose Flat Panel | 9671637-02 |
| Wedge Screen Clamping Mongoose 75 Shore D Polyurethane Black | 5895001 |
| Flatwasher M10 Metric, SS | 05-277 |
| HHCS M10 x 30 Metric, SS | 04-1103 |
| Lockwasher M10 Split, SS | 05-270 |
| Hex Nut M10 Metric, SS | 03-229 |
| Bar, Skirt Retainer | 9671638-02 |
| Skirt Mongoose Feed End High Grade Nitrile 80 Shore A | 5873004 |
| Gasket Compression “P” Screen Bed Mongoose | 5837001 |
| Weldment, Screen Gasket Hold Down Bar | 9671640 |
| Drip Lip Basket Mongoose | 9671925 |
| Grommet Screw .273 Sq. Panel Hole, Panel Thk. 0.31-.156 | 07-415 |
| Screw Flat HD CRSK Sheet Metal 8-32 x 1” Lg., SS, Sq. Head | 1441471 |
| Label, Crush Hands | BM6K80100 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9671906 (10T4 D-Silter Assembly w/ Header Box Mongoose PT Mud Cleaner) | |
| Description | MI-Swaco P/N |
| Nut Hex Plt. 5/8-11 NC | 1305041 |
| Washer Flat Plt. 5/8 in x 1.31 OD | 1345041 |
| Washer Lock Split Plt. 5/8 in | 1345344 |
| Screw Hex Hd Cap Plt. 5/8-11 NC x 2 | 1407139 |
| Drs #4 x 5/16 304 SS | 1492031 |
| Gauge 0-60 PSI/0-400 KPA 2-1/12 in 1/4 NPT LM | 2422177 |
| Gasket Ring ANSI Flange RF 150 LB. 10 in | 3916067 |
| Cap Grooved End 6 in | 5010134 |
| Cap Grooved End 8 in | 5010135 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 PSI | 5015029 |
| Cuplng Grooved End 8 in Bolt T-Gasket 800 PSI | 5015030 |
| Cuplng Grooved End 10 in Bolt T-Gasket 800 PSI | 5015031 |
| Cuplng Grooved End 2 in Snap T-Gasket 300 PSI | 5015052 |
| Cuplng Grooved End 2-1/2 in Snap T-Gasket | 5015053 |
| Plug SQ Hd. Galv. 150 PSI 1 NPT | 5068261 |
| Decal MI-Swaco | 8420200 |
| Clone Twin 4 Urethane Complete w/ 1/2 Apex | 9622220 |
| Manifold Feed D-Silter 10T4 w/o Flange | 9622532 |
| Manifold Overflow D-Silter 10T4 / ALS Mud Cleaner | 9622585 |
| Elbow D-Silter 10T4 Poly 2 in Grooved End | 9622595 |
| Nameplate ID Product | 9650360 |
| Cover, MS Weld Flange 10” PT Mongoose | 9671652-01 |
| Weldment, 10T4 Header Box w/o Flange Mud Cleaner | 9671907 |
| Weldment, Leg Header Box D-Silter 10T4 | 9671914 |
| Weldment, Leg Header Box D-Silter 10T4 | 9671915 |
| Weldment Leg HDR Box Mud Cleaner w/o Bolt on Flange | 9671926 |
| Weldment Leg HDR Box Mud Cleaner w/o Bolt on Flange | 9671927 |
| Plate, Slider Bypass D-Silter PT Mongoose Mud Cleaner | 9671941 |
| Nipple Stub Grooved End 8 in x 5 in Lg. | 9697001-13 |
| Nipple Stub Grooved End 10 in x 5 in Lg. | 9697001-14 |
| Flatwasher M12 Metric 304 SS | 05-305 |
| Flatwasher M24 Metric 304 SS | 05-308 |
| Hex Nut M12 Metric, 304 SS, M12 x 1.75 | 03-415 |
| Hex Nut M24 Metric, 304 SS | 03-412 |
| HHCS M12 x 35 Metric, 304 SS | 04-1105 |
| HHCS M12 x 40 Metric, 304 SS | 04-1106 |
| HHCS M24-3.0 x 90 mm MS, Yellow Chromate Plt. Gr. 10.9 Full Thread | 1493003 |
| CVR/Plug-I/O 6” Dia. High Grade Nitrile 45-70 Shore A Hardiness | S48K00827-NL |
| Lockwasher M12 Split 304 SS | 05-306 |
| Lockwasher M24 Split 304 SS | 05-309 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9622220 (Clone Twin 4” Urethane Complete w/ 1/2” Apex) | |
| Description | Part Number |
| Liner Feed Urethane | 9622221 |
| Valve Apex 1/2” | 9622312 |
| Valve Apex 3/8” = 9622338 Valve Apex 5/8” = 9622358 | |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assemblies 9671947 and 9671954 | |
| 2-12 D-Sander Assembly Mongoose PT Mud Cleaner; Applies to main assembly 9671902-01 | Assembly 9671947: |
| 3-12 D-Sander Stand w/ Clones Mongoose PT Mud Cleaner; Applies to main assembly 9671902-02 | Assembly 9671954: |
| Assembly 9671947 (2-12 D-Sander Assembly Mongoose PT Mud Cleaner) | |
| Description | MI-Swaco P/N |
| Clamping Unit, 5/8” Hose OD, 3 Hose Clamp | 00-1614 |
| U-Bolt CS 8 in Pipe 5/8-11 NC x 11.37 Lg. w/ Nuts | 1289105 |
| U-Bolt CS 10 in Pipe 3/4-10 NC x 13.75 Lg. w/ Nuts | 1289140 |
| DRS #4 x 5/8, 304 SS | 1492031 |
| Gauge 0-60/0-400 KPA 2-1/2 in 1/4 NPT LM | 2422177 |
| Cuplng Grooved End 4 in Bolt T-Gasket 1000 PSI | 5015026 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 PSI | 5015029 |
| Cuplng Grooved End 8 in Bolt T-Gasket 800 PSI | 5015030 |
| Cuplng Grooved End 10 in Bolt T-Gasket 800 PSI | 5015031 |
| Ell Grooved End 90D MI SR Sch 40 6 in | 5030860 |
| Clone Assembly Urethane 12 in Grooved End | 9621280 |
| U-Bolt 7-3/8 in ID 5/8-11 NC x 8-3/4 in Lg. | 9621289 |
| Manifold Feed ALS Mounted 2-12 Slant D-Sander | 9621379 |
| Manifold Overflow ALS Mounted 2-12 Slant D-Sander | 9621380 |
| Nameplate ID Product | 9650360 |
| Weldment, 2-12, 3-12 D-Sander Stand PT Mongoose Mud Cleaner | 9671953 |
| Bracket, Adjustment D-Sander Clones PT Mongoose Mud Cleaner | 9671961 |
| Bracket, Mating 2-12 D-Sander PT Mongoose Mud Cleaner | 9671962 |
| Weldment, Upright D-Sander PT Mongoose Mud Cleaner | 9671964 |
| Weldment, Upright D-Sander PT Mongoose Mud Cleaner | 9671965 |
| Nipple Stub Grooved End 8 in x 5 in Lg. | 9671001-13 |
| Nipple Stub Grooved End 10 in x 5 in Lg. | 9697001-14 |
| Flatwasher M12 Metric 304 SS | 05-305 |
| Flatwasher M8 Metric 304 SS | 05-276 |
| Flatwasher 5/8 304 SS | 05-174 |
| Flatwasher 3/4 304 SS | 05-160 |
| Hex Nut M12 Metric 304 SS | 03-415 |
| Hex Nut M8 Metric 304 SS | 03-232 |
| Hex Nut 5/8-NC 304 SS | 03-145 |
| Hex Nut 3/4-NC 304 SS | 03-404 |
| HHCS M12 x 35 Metric 304 SS | 04-1105 |
| HHCS M12 x 40 Metric 304 SS | 04-1106 |
| HHCS M8 x 60 mm Metric 304 SST Hex Head Cap Screw | 04-1451 |
| Lockwasher M12 Split 304 SS | 05-306 |
| Lockwasher M8 Split 304 SS | 05-285 |
| Lockwasher 5/8 Split 304 SS | 05-176 |
| Lockwasher 3/4 Split 304 SST | 05-236 |
| Assembly 9671954 (3-12 D-Sander Sander with Clones Mongoose PT Mud Cleaner) | |
| Description | MI-Swaco P/N |
| Clamping Unit, 5/8” Hose OD, 3 Hose Clamp | 00-1614 |
| U-Bolt CS 10 in Pipe 3/4-10 NC x 13.75 Lg. w/ Nuts | 1289140 |
| U-Bolt CS 10 in Pipe 7/8-9 NC x 16.06 Lg. w/ Nuts | 1289171 |
| DRS #4 x 5/8, 304 SS | 1492031 |
| Gauge 0-60/0-400 KPA 2-1/2 in 1/4 NPT LM | 2422177 |
| Cuplng Grooved End 4 in Bolt T-Gasket 1000 PSI | 5015026 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 PSI | 5015029 |
| Cuplng Grooved End 10 in Bolt T-Gasket 800 PSI | 5015031 |
| Cuplng Grooved End 12 in Bolt T-Gasket 800 PSI | 5015032 |
| Ell Grooved End 90D MI SR Sch 40 6 in | 5030860 |
| Clone Assembly Urethane 12 in Grooved End | 9621280 |
| U-Bolt 7-3/8 in ID 5/8-11 NC x 8-3/4 in Lg. | 9621289 |
| Manifold Inlet 10” Diameter 3-12 Slant Mount D-Sander | 9621325 |
| Manifold 12” Diameter 3-12 Slant Mount D-Sander | 9621326 |
| Nameplate ID Product | 9650360 |
| Weldment, 2-12, 3-12 D-Sander Stand PT Mongoose Mud Cleaner | 9671953 |
| Bracket, Adjustment D-Sander Clones PT Mongoose Mud Cleaner | 9671961 |
| Bracket, Mating 3-12 D-Sander PT Mongoose Mud Cleaner | 9671963 |
| Weldment, Upright D-Sander PT Mongoose Mud Cleaner | 9671964 |
| Weldment, Upright D-Sander PT Mongoose Mud Cleaner | 9671965 |
| Nipple Stub Grooved End 8 in x 5 in Lg. | 9671001-13 |
| Nipple Stub Grooved End 10 in x 5 in Lg. | 9697001-14 |
| Flatwasher M12 Metric 304 SS | 05-305 |
| Flatwasher M8 Metric 304 SS | 05-276 |
| Flatwasher 5/8 304 SS | 05-174 |
| Flatwasher 3/4 304 SS | 05-160 |
| Flatwasher 7/8, 304 SS Type A Plain Narrow | 05-238 |
| Hex Nut M12 Metric 304 SS | 03-415 |
| Hex Nut M8 Metric 304 SS | 03-232 |
| Hex Nut 5/8-NC 304 SS | 03-145 |
| Hex Nut 3/4-NC 304 SS | 03-404 |
| Hex Nut 7/8-NC 304 SS | 03-405 |
| HHCS M12 x 35 Metric 304 SS | 04-1105 |
| HHCS M12 x 40 Metric 304 SS | 04-1106 |
| HHCS M8 x 60 mm Metric 304 SST Hex Head Cap Screw | 04-1451 |
| Lockwasher M12 Split 304 SS | 05-306 |
| Lockwasher M8 Split 304 SS | 05-285 |
| Lockwasher 5/8 Split 304 SS | 05-176 |
| Lockwasher 3/4 Split 304 SST | 05-236 |
| Lockwasher 7/8 Split 316 SS | 05-177 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9621280 (Clone Assembly Urethane 12 in Grooved End) | |
| Description | Part Number |
| Feed 12” Feed Section w/ Victaulic End | 9621281 |
| Body Main 12” Close Urethane | 9621173 |
| Body Mid 12” Clone Urethane | 9621175 |
| Valve 1-1/2” Apex Clone Urethane | 9621174 |
| Clamp V-Band 16.12 I.D., 12” Clone | 9621177 |
| Clamp V-Band 9.88 I.D., 12” Clone | 9621176 |
| Recommended Spare Parts for Assemblies 9671902-01 and 9671902-02 | |
| Description | MI-Swaco P/N |
| Screen Mesh 10 | JMONMK010P |
| Screen Mesh 20 | JMONMK020P |
| Screen Mesh 30 | JMONMK030P |
| Screen Mesh 40 | JMONMK040P |
| Screen Mesh 24 | JMONMK024P |
| Screen Mesh 38 | JMONMK038P |
| Screen Mesh 50 | JMONMK050P |
| Screen Mesh 70 | JMONMK070P |
| Screen Mesh 84 MAGNUM | JMONMG084P |
| Screen Mesh 110 MAGNUM | JMONMG110P |
| Screen Mesh 140 MAGNUM | JMONMG140P |
| Screen Mesh 175 MAGNUM | JMONMG175P |
| Screen Mesh 210 MAGNUM | JMONMG210P |
| Screen Mesh 250 MAGNUM | JMONMG250P |
| Screen Mesh 84 MX | JMONMX084P |
| Screen Mesh 110 MX | JMONMX110P |
| Screen Mesh 140 MX | JMONMX140P |
| Screen Mesh 175 MX | JMONMX175P |
| Screen Mesh 210 MX | JMONMX210P |
| Screen Mesh 250 MX | JMONMX250P |
| Screen Mesh 84 HC-MAGNUM | JMONHC084P |
| Screen Mesh 110 HC-MAGNUM | JMONHC110P |
| Screen Mesh 140 HC-MAGNUM | JMONHC140P |
| Screen Mesh 175 HC-MAGNUM | JMONHC175P |
| Screen Mesh 210 HC-MAGNUM | JMONHC210P |
| Screen Mesh 250 HC-MAGNUM | JMONHC250P |
| Screen Mesh 325 HC-MAGNUM | JMONHC325P |
| Reset Buttons | 7573290 |
| Selector Switch | 7573106 |
| E-Stop “Push-Pull” | 7573105 |
| Transformer (380V) | 7790016 |
| Fuse Block | 7519002 |
| Timer | 7117005 |
| Overload Blocks | 7150002 |
| Contactors- Non. Rev. | 7150001 |
| Contactor-Reversing | 6930009 |
| Mechanical Push Rod | 8071702 |
| Overload Heaters | 7152606 |
| Overload Heaters | 7152605 |
| Fuse | 7518022 |
| Fuses | 7518020 |
| Mtr. 1.75 Hp 220-240/380-415V, 50/3/1500 | EM3C00010 |
| Mtr. 220/380V, 0.60, 50/3/1500 | 6905003 |
| Lockwasher 1 SHKPRF Ext. MS | 05-110 |
| Locknut Electrical 3/4 | 01-184 |
| Cord Grip 3/4 NPT St. .625-.750 Range Alum. Male | 01-106 |
| Bushing Conduit Redcr. EP 3/4 MPT x 1/2 FPT | 5008937 |
| Connector Cable EP 1/2 NPT, .51-.81 Dia. Armored | 6560030 |
| Ell. Conduit EP 90 3/4 MPT x 3/4 FPT | 5030937 |
| Cable Armored 4 Cond. 12 AWG w\ Jacket | 7906218 |
| Jack Assembly Lifting | 9671681 |
| Nut Hex Plate M20-1.5 Grade 10.9, Yellow Chromate | 1305055 |
| Screw Hex Hd. Plate M20-1.5 x 120 mm, Yellow Chromate | 1407169 |
| CVR/Plug- I/O 6” Dia. | S48K00827-NL |
| Spring Coil 7 inch Inline Shaker | 9360007 |
| Lockwasher Schnorr M20 Metric Motor Washer | 05-244 |
| Motor Washer, SS | BM6Y80043-01XB |
| Washer, 16 mm Motor | 9671682 |
| Lockwasher Schnorr, M16 Metric Motor Washer | 05-248 |
| Screw Hex HD Plate M16-1.5 x 100 mm, Grd. 10.9 Yellow Chromate | 1407144 |
| Washer Spring Isolation High Grade Nitrile 70 Shore A | 5895002 |
| Nut Hex Plt. M16-1.5, Grd. 10.9 Yellow Chromate | 1305040 |
| Gasket Ring ANSI Flange RF 150 LB 10 in | 3916067 |
| Boot, Spring | 5804004 |
| Wedge Screen Clamping Mongoose 75 Shore D Polyurethane Black | 5895001 |
| Skirt Mongoose Feed End High Grade Nitrile 80 Shore A | 5873004 |
| Gasket Compression “P” Screen Bed Mongoose | 5837001 |
| Weldment, Screen Gasket Hold Down Bar | 9671640 |
| Grommet Screw .273 Sq. Panel Hole, Panel Thk. 0.31-.156 | 07-415 |
| Screw Flat HD CRSK Sheet Metal 8-32 x 1” Lg., SS, Sq. Head | 1447471 |
| Gauge 0-60 PSI / 0-400 KPa 2-1/2 in 1/4 NPT LM | 2422177 |
| Gasket Ring ANSI Flange RF 150 LB, 10 in | 3916067 |
| Cap Grooved End 6 in | 5010134 |
| Cap Grooved End 8 in | 5010135 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 psi | 5015029 |
| Cuplng Grooved End 8 in Bolt T-Gasket 800 psi | 5015030 |
| Cuplng Grooved End 10 in Bolt T-Gasket 800 psi | 5015031 |
| Cuplng Grooved End 2 in Bolt T-Gasket 300 psi | 5015052 |
| Cuplng Grooved End 2-1/2 in Snap T-Gasket | 5015053 |
| Plug SQ Hd. Galv. 150 psi 1 NPT | 5068261 |
| Clone Twin 4 Urethane Complete w/ 1/2 Apex | 9622220 |
| Manifold Feed D-Silter 10T4 w/o Flange | 9622532 |
| Manifold Overflow D-Silter 10T4 / ALS Mud Cleaner | 9622585 |
| Elbow D-Silter 10T4 Poly 2 in Grooved End | 9622595 |
| Nipple Stub Grooved End 6 in x 5 in Lg. | 9697001-12 |
| Nipple Stub Grooved End 8 in x 5 in Lg. | 9697001-13 |
| CVR/Plug – I/O 6” Dia. | S48K00827-NL |
| Liner Feed Urethane | 9622221 |
| Valve Apex 1/2” | 9622312 |
| Clamping Unit, 5/8” Hose OD, 3 Hose Clamp | 00-1614 |
| U-Bolt CS 8 in Pipe 5/8-11 NC x 11.37 Lg. w/ Nuts | 1289105 |
| U-Bolt CS 10 in Pipe 3/4-10 NC x 13.75 Lg. w/ Nuts | 1289140 |
| Gauge 0-60/0-400 KPA 2-1/2 in 1/4 NPT LM | 2422177 |
| Cuplng Grooved End 4 in Bolt T-Gasket 1000 PSI | 5015026 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 PSI | 5015029 |
| Cuplng Grooved End 8 in Bolt T-Gasket 800 PSI | 5015030 |
| Cuplng Grooved End 10 in Bolt T-Gasket 800 PSI | 5015031 |
| Ell Grooved End 90D MI SR Sch 40 6 in | 5030860 |
| Clone Assembly Urethane 12 in Grooved End | 9621280 |
| U-Bolt 7-3/8 in ID 5/8-11 NC x 8-3/4 in Lg. | 9621289 |
| Manifold Feed ALS Mounted 2-12 Slant D-Sander | 9621379 |
| Manifold Overflow ALS Mounted 2-12 Slant D-Sander | 9621380 |
| Feed 12” Feed Section w/ Victaulic End | 9621281 |
| Body Main 12” Close Urethane | 9621173 |
| Body Mid 12” Clone Urethane | 9621175 |
| Valve 1-1/2” Apex Clone Urethane | 9621174 |
| Clamp V-Band 16.12 I.D., 12” Clone | 9621177 |
| Clamp V-Band 9.88 I.D., 12” Clone | 9621176 |
| Recommended Spare Parts for Assembly 9671902-02 | |
| Description | MI-Swaco P/N |
| Screen Mesh 10 | JMONMK010P |
| Screen Mesh 20 | JMONMK020P |
| Screen Mesh 30 | JMONMK030P |
| Screen Mesh 40 | JMONMK040P |
| Screen Mesh 24 | JMONMK024P |
| Screen Mesh 38 | JMONMK038P |
| Screen Mesh 50 | JMONMK050P |
| Screen Mesh 70 | JMONMK070P |
| Screen Mesh 84 MAGNUM | JMONMG084P |
| Screen Mesh 110 MAGNUM | JMONMG110P |
| Screen Mesh 140 MAGNUM | JMONMG140P |
| Screen Mesh 175 MAGNUM | JMONMG175P |
| Screen Mesh 210 MAGNUM | JMONMG210P |
| Screen Mesh 250 MAGNUM | JMONMG250P |
| Screen Mesh 84 MX | JMONMX084P |
| Screen Mesh 110 MX | JMONMX110P |
| Screen Mesh 140 MX | JMONMX140P |
| Screen Mesh 175 MX | JMONMX175P |
| Screen Mesh 210 MX | JMONMX210P |
| Screen Mesh 250 MX | JMONMX250P |
| Screen Mesh 84 HC-MAGNUM | JMONHC084P |
| Screen Mesh 110 HC-MAGNUM | JMONHC110P |
| Screen Mesh 140 HC-MAGNUM | JMONHC140P |
| Screen Mesh 175 HC-MAGNUM | JMONHC175P |
| Screen Mesh 210 HC-MAGNUM | JMONHC210P |
| Screen Mesh 250 HC-MAGNUM | JMONHC250P |
| Screen Mesh 325 HC-MAGNUM | JMONHC325P |
| Reset Buttons | 7573290 |
| Selector Switch | 7573106 |
| E-Stop “Push-Pull” | 7573105 |
| Transformer (380V) | 7790016 |
| Fuse Block | 7519002 |
| Timer | 7117005 |
| Overload Blocks | 7150002 |
| Contactors- Non. Rev. | 7150001 |
| Contactor-Reversing | 6930009 |
| Mechanical Push Rod | 8071702 |
| Overload Heaters | 7152606 |
| Description | Ml-Swaco P/N |
| Overload Heaters | 7152605 |
| Fuse | 7518022 |
| Fuses | 7518020 |
| Mtr. 1.75 Hp 220-240/380-415V, 50/3/1500 | EM3C00010 |
| Mtr. 220/380V, 0.60, 50/3/1500 | 6905003 |
| Lockwasher 1 SHKPRF Ext. MS | 05-110 |
| Locknut Electrical 3/4 | 01-184 |
| Cord Grip 3/4 NPT St. .625-.750 Range Alum. Male | 01-106 |
| Bushing Conduit Redcr. EP 3/4 MPT x 1/2 FPT | 5008937 |
| Connector Cable EP 1/2 NPT, .51-.81 Dia. Armored | 6560030 |
| Ell. Conduit EP 90 3/4 MPT x 3/4 FPT | 5030937 |
| Cable Armored 4 Cond. 12 AWG w\ Jacket | 7906218 |
| Jack Assembly Lifting | 9671681 |
| Nut Hex Plt. M20-1.5 Grade 10.9, Yellow Chromate | 1305055 |
| Screw Hex Hd. Plt. M20-1.5 x 120 mm, Yellow Chromate | 1407169 |
| CVR/Plug- I/O 6” Dia. | S48K00827-NL |
| Spring Coil 7 inch Inline Shaker | 9360007 |
| Lockwasher Schnorr M20 Metric Motor Washer | 05-244 |
| Motor Washer, SS | BM6Y80043-01XB |
| Washer, 16 mm Motor | 9671682 |
| Lockwasher Schnorr, M16 Metric Motor Washer | 05-248 |
| Screw Hex HD Plt. M16-1.5 x 100 mm, Grd. 10.9 Yellow Chromate | 1407144 |
| Washer Spring Isolation High Grade Nitrile 70 Shore A | 5895002 |
| Nut Hex Plate M16-1.5, Grd. 10.9 Yellow Chromate | 1305040 |
| Gasket Ring ANSI Flange RF 150 LB 10 in | 3916067 |
| Boot, Spring | 5804004 |
| Wedge Screen Clamping Mongoose 75 Shore D Polyurethane Black | 5895001 |
| Skirt Mongoose Feed End High Grade Nitrile 80 Shore A | 5873004 |
| Gasket Compression “P” Screen Bed Mongoose | 5837001 |
| Weldment, Screen Gasket Hold Down Bar | 9671640 |
| Grommet Screw .273 Sq. Panel Hole, Panel Thk. 0.31-.156 | 07-415 |
| Screw Flat HD CRSK Sheet Metal 8-32 x 1” Lg., SS, Sq. Head | 1447471 |
| Gauge 0-60 PSI / 0-400 KPa 2-1/2 in 1/4 NPT LM | 2422177 |
| Gasket Ring ANSI Flange RF 150 LB, 10 in | 3916067 |
| Cap Grooved End 6 in | 5010134 |
| Cap Grooved End 8 in | 5010135 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 psi | 5015029 |
| Cuplng Grooved End 8 in Bolt T-Gasket 800 psi | 5015030 |
| Cuplng Grooved End 10 in Bolt T-Gasket 800 psi | 5015031 |
| Cuplng Grooved End 2 in Bolt T-Gasket 300 psi | 5015052 |
| Cuplng Grooved End 2-1/2 in Snap T-Gasket | 5015053 |
| Plug SQ Hd. Galv. 150 psi 1 NPT | 5068261 |
| Description | Ml-Swaco P/N |
| Clone Twin 4 Urethane Complete w/ 1/2 Apex | 9622220 |
| Manifold Feed D-Silter 10T4 w/o Flange | 9622532 |
| Manifold Overflow D-Silter 10T4 / ALS Mud Cleaner | 9622585 |
| Elbow D-Silter 10T4 Poly 2 in Grooved End | 9622595 |
| Nipple Stub Grooved End 6 in x 5 in Lg. | 9697001-12 |
| Nipple Stub Grooved End 8 in x 5 in Lg. | 9697001-13 |
| CVR/Plug – I/O 6” Dia. | S48K00827-NL |
| Liner Feed Urethane | 9622221 |
| Valve Apex 1/2” | 9622312 |
| Clamping Unit, 5/8” Hose OD, 3 Hose Clamp | 00-1614 |
| U-Bolt CS 10 in Pipe 3/4-10 NC x 13.75 Lg w/ Nuts | 1289140 |
| U-Bolt CS 12 in Pipe 7/8-9 NC x 16.06 Lg. w/ Nuts | 1289171 |
| Gauge 0-60/0-400 KPA 2-1/2 in 1/4 NPT LM | 2422177 |
| Cuplng Grooved End 4 in Bolt T-Gasket 1000 PSI | 5015026 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 PSI | 5015029 |
| Cuplng Grooved End 10 in Bolt T-Gasket 800 PSI | 5015031 |
| Cuplng Grooved End 12 in Bolt T-Gasket 800 PSI | 5015032 |
| Ell Grooved End 90D MI SR Sch 40 6 in | 5030860 |
| Clone Assembly Urethane 12 in Grooved End | 9621280 |
| U-Bolt 7-3/8 in ID 5/8-11 NC x 8-3/4 in Lg. | 9621289 |
| Manifold Inlet 10” Diameter 3-12 Slant Mount D- Sander | 9621325 |
| Manifold 12” Diameter 3-12 Slant Mount D-Sander | 9621326 |
| Feed 12” Feed Section w/ Victaulic End | 9621281 |
| Body Main 12” Close Urethane | 9621173 |
| Body Mid 12” Clone Urethane | 9621175 |
| Valve 1-1/2” Apex Clone Urethane | 9621174 |
| Clamp V-Band 16.12 I.D., 12” Clone | 9621177 |
| Clamp V-Band 9.88 I.D., 12” Clone | 9621176 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assemblies 9671903-01 and 9671903-02 | |
| Assembly 9671903-01: 3 Motor 380V, 50 Hz | Shaker Mongoose PT 3-12/6T4 Mud Cleaner |
| Assembly 9671903-02: 3 Motor 380V, 50 Hz | Shaker Mongoose PT 3-12/8T4 Mud Cleaner |
| Assembly 9671903-01 (Shaker Mongoose PT 3-12/6T4 Mud Cleaner 3 Mtr. 380V, 50 Hz) | |
| Description | MI-Swaco P/N |
| Shaker Mongoose PT Effluent Skid Less Motor, Controls | 9671843 |
| Control Assembly Kit Mongoose PT (3) Mtr. 380V, 50 Hz | 9671688-02 |
| Mtr. 1.75 Hp 220-240/380-415V, 50/3/1500 | EM3C00010 |
| Mtr. 220/380V 0.60 Hp 50 Hz XP Vibrator | 6905003 |
| D-Silter 6T4 3-12 Assembly Header Box PT Mongoose | 9671919 |
| D-Sander 3-12 Stand w/ Clones Mongoose PT Mud Cleaner | 9671954 |
| Nameplate ID Product M-I Swaco | 9650360 |
| Pop Rivet 1/8” D 3/16-1/4 Grip, 304 SS | 07-409 |
| Bracket Shipping D-Silter, D-Sander Mongoose PT | 9671809 |
| Assembly 9671903-02 (Shaker Mongoose PT 3-12/8T4 Mud Cleaner 3 Mtr. 380V, 50 Hz) | |
| Description | MI-Swaco P/N |
| Shaker Mongoose PT Effluent Skid Less Motor, Controls | 9671843 |
| Control Assembly Kit Mongoose PT (3) Mtr. 380V, 50 Hz | 9671688-02 |
| Mtr. 1.75 Hp 220-240/380-415V, 50/3/1500 | EM3C00010 |
| Mtr. 220/380V 0.60 Hp 50 Hz XP Vibrator | 6905003 |
| D-Silter 8T4 3-12 Assembly Header Box PT Mongoose | 9671920 |
| D-Sander 3-12 Stand w/ Clones Mongoose PT Mud Cleaner | 9671954 |
| Nameplate ID Product M-I Swaco | 9650360 |
| Pop Rivet 1/8” D 3/16-1/4 Grip, 304 SS | 07-409 |
| Bracket Shipping D-Silter, D-Sander Mongoose PT | 9671809 |
| Drawings and Parts List Control Assembly Kit (9671688-02) | |
| Description | MI-Swaco P/N |
| Plate, Control Panel Mounting Adapter | 9671689 |
| Starter Assembly 380 V, 50 Hz | 6930007 |
| Mount Vibration Donut | 5859378 |
| Lockwasher, 1” | 05-110 |
| Conduit Locknut, %” NPT | 01-184 |
| Cord Grip Straight | 01-106 |
| Reducer Bushing, %” MPT x ^ FPT | 5008937 |
| Cable Connector, NPT .51-.81 Dia. Armored | 6560030 |
| Conduit Elbow, 90 Deg. % x % FPT | 5030937 |
| Tie Cable | 8087255 |
| Decal, Arrow Rotation | 9650367 |
| Cable Armored 4 Conductor, UL Approved | 7906218 |
| Flatwasher, M12 Regular, SST | 05-305 |
| Lockwasher, M12 Regular, SST | 05-306 |
| Hex Nut, M12, SST | 03-415 |
| HHCS, M12 x 80 mm Lg., SST | 04-1147 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9671843 (Mongoose PT Effluent Skid Less Motors and Controls) | |
| Description | MI-Swaco P/N |
| Skid Weldment Mongoose Effluent | 9671790 |
| Basket Assembly, Mongoose PT | 9671738-01 |
| HHCS M12 x 45 mm, SS | 04-1270 |
| Jack Assembly Lifting | 9671681 |
| Nut Hex Plt. M20-1.5 Grade 10.9, Yellow Chromate | 1305055 |
| Screw Hex Hd. Plt. M20-1.5 x 120 mm, Yellow Chromate | 1407169 |
| Gate, Skid Slide Mongoose Effluent Design | 9671815 |
| Bracket, Shipping Metric | 9671742 |
| Flatwasher M20 Metric, SS | 05-296 |
| Lockwasher M20 Metric, SS | 05-307 |
| Screw Hex Hd, SS, M20 x 45 mm | 1493215 |
| Flatwasher M12 Metric, SS | 05-305 |
| Lockwasher M12 Split, SS | 05-306 |
| Decal MI-Swaco | 8420202 |
| Hex Nut M12 Metric, SS, M12 x 1.75, SS | 03-415 |
| Weldment, Spring Spool Mongoose Flat Panel | 9671679 |
| Indicator Pointer Mongoose PT Bolt Flg. Design | 9671683 |
| Plate, Right Indicator | 9671744 |
| Plate, Left Indicator | 9671745 |
| CVR/Plug- I/O 6” Dia. | S48K00827-NL |
| Spring Coil 7 inch Inline Shaker | 9360007 |
| Lockwasher Schnorr M20 Metric Motor Washer | 05-244 |
| Motor Washer, SS | BM6Y80043-01XB |
| Washer, 16 mm Motor | 9671682 |
| Lockwasher Schnorr, M16 Metric Motor Washer | 05-248 |
| Screw Hex HD Plate M16-1.5 x 100 mm, Grd. 10.9 Yellow Chromate | 1407144 |
| Washer Spring Isolation High Grade Nitrile 70 Shore A | 5895002 |
| Nut Hex Plate M16-1.5, Grd. 10.9 Yellow Chromate | 1305040 |
| Nameplate MI-Swaco | 9650360 |
| Pop Rivet 1/8” D 3/16-1/4” Grip | 07-409 |
| Cover, Weld Flange 10” PT Mongoose | 9671652-01 |
| Gasket Ring ANSI Flange RF 150 LB 10 in | 3916067 |
| HHCS M24-3.0 x 90 mm MS, Yellow Chromate, GR 8.8 | 1493003 |
| Hex Nut M24, Metric, SS | 03-412 |
| Flatwasher M24, Metric, SS | 05-308 |
| Lockwasher M24 Split, SS | 05-309 |
| Label, Lift Point | BM6K80098 |
| Label, “PE” Protective Earth | BM6K80097 |
| Boot, Spring | 5804004 |
| Decal Shipping Bracket Position | 9650511 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9671738-01 (Basket Assembly, Mongoose PT MS Basket / 304 SS HDW (Metric) | |
| Description | MI-Swaco P/N |
| Basket Weldment Mongoose PT | 9671610 |
| Cover, Removable Mongoose Flat Panel | 9671637-02 |
| Wedge Screen Clamping Mongoose 75 Shore D Polyurethane Black | 5895001 |
| Flatwasher M10 Metric, SS | 05-277 |
| HHCS M10 x 30 Metric, SS | 04-1103 |
| Lockwasher M10 Split, SS | 05-270 |
| Hex Nut M10 Metric, SS | 03-229 |
| Bar, Skirt Retainer | 9671638-02 |
| Skirt Mongoose Feed End High Grade Nitrile 80 Shore A | 5873004 |
| Gasket Compression “P” Screen Bed Mongoose | 5837001 |
| Weldment, Screen Gasket Hold Down Bar | 9671640 |
| Drip Lip Basket Mongoose | 9671925 |
| Grommet Screw .273 Sq. Panel Hole, Panel Thk. 0.31-.156 | 07-415 |
| Screw Flat HD CRSK Sheet Metal 8-32 x 1” Lg., SS, Sq. Head | 1441471 |
| Label, Crush Hands | BM6K80100 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assemblies 9671919 and 9671920 | |
| Assembly 9671919:Cleaner; Applies to main assembly 9671903-01 | D-Silter 6T4 3-12 Assembly Header Box PT Mud |
| Assembly 9671920:Cleaner; Applies to main assembly 9671903-02 | D-Silter 8T4 3-12 Assembly Header Box PT Mud |
| Assembly 9671919 (D-Silter 6T4 3-12 Assembly Header Box PT Mud Cleaner) | |
| Description | MI-Swaco P/N |
| Nut Hex Plt. 5/8-11 NC | 1305041 |
| Washer Flat Plt. 5/8 in x 1.31 OD | 1345041 |
| Washer Lock Split Plt. 5/8 in | 1345344 |
| Screw Hex Hd Cap Plt. 5/8-11 NC x 2 | 1407139 |
| Drs #4 x 5/16 304 SS | 1492031 |
| Gauge 0-60 PSI/0-400 KPA 2-1/12 in 1/4 NPT LM | 2422177 |
| Gasket Ring ANSI Flange RF 150 LB. 10 in | 3916067 |
| Bushing Reducer Galv. 150 PSI 1/2 x 1/4 NPT | 5008417 |
| Cap Grooved End 6 in | 5010134 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 PSI | 5015029 |
| Cuplng Grooved End 8 in Bolt T-Gasket 800 PSI | 5015030 |
| Cuplng Grooved End 2 in Snap T-Gasket 300 PSI | 5015052 |
| Cuplng Grooved End 2-1/2 in Snap T-Gasket | 5015053 |
| Plug SQ Hd. Galv. 150 PSI 1 NPT | 5068261 |
| Decal MI-Swaco | 8420200 |
| Clone Twin 4 Urethane Complete w/ 1/2 Apex | 9622220 |
| Manifold Inlet 6T4 D-Silter ALS Mud Cleaner | 9622491 |
| Manifold OF 6T4 D-Silter ALS Mud Cleaner | 9622942 |
| Elbow Grooved End 90D Poly 2 in | 9622582 |
| Nameplate ID Product M-I Swaco | 9650360 |
| Cover, Weld Flange 10” PT Mongoose | 9671652-01 |
| Bracket, Mount D-Silter Mud Cleaner w/o Bolt on Flange | 9671853 |
| Weldment Leg HDR Box Mud Cleaner w/o Bolt on Flange | 9671926 |
| Weldment Leg HDR Box Mud Cleaner w/o Bolt on Flange | 9671927 |
| Weldment Leg Header Box Mud Cleaner w/o Bolt on Flange | 9671937 |
| Weldment Leg Header Box Mud Cleaner w/o Bolt on Flange | 9671938 |
| Plate, Slider Bypass D-Silter PT Mongoose Mud Cleaner | 9671941 |
| Weldment, 6T4-8T4 Header Box w/o Flange – Mud Cleaner | 9671945 |
| Weldment, Trough 3-12 D-Sander PT Mongoose Mud Cleaner | 9671960 |
| Nipple Stub Grooved End 6 in x 5 in Lg. | 9697001-12 |
| Nipple Stub Grooved End 8 in x 5 in Lg. | 9677001-13 |
| Label, Do Not Lift | BM6K80122 |
| Flatwasher, M12 Regular, SST | 05-305 |
| Flatwasher M24, Metric, SS | 05-308 |
| Hex Nut, M12, SST | 03-415 |
| Hex Nut M24, Metric, SS | 03-412 |
| HHCS M12 x 35 Metric, 304 SS | 04-1105 |
| HHCS M12 x 45 mm, SS | 04-1270 |
| HHCS M24-3.0 x 90 mm MS, Yellow Chromate, GR 8.8 | 1493003 |
| CVR/Plug- I/O 6” Dia. | S48K00827-NL |
| Lockwasher M12 Split, SS | 05-306 |
| Lockwasher M24 Split, SS | 05-309 |
| Assembly 9671920 (D-Silter 8T4 3-12 Assembly Header Box PT Mud Cleaner) | |
| Description | MI-Swaco P/N |
| Nut Hex Plt. 5/8-11 NC | 1305041 |
| Washer Flat Plt. 5/8 in x 1.31 OD | 1345041 |
| Washer Lock Split Plt. 5/8 in | 1345344 |
| Screw Hex Hd Cap Plt. 5/8-11 NC x 2 | 1407139 |
| Drs #4 x 5/16 304 SS | 1492031 |
| Gauge 0-60 PSI/0-400 KPA 2-1/12 in 1/4 NPT LM | 2422177 |
| Gasket Ring ANSI Flange RF 150 LB. 10 in | 3916067 |
| Bushing Reducer Galv. 150 PSI 1/2 x 1/4 NPT | 5008417 |
| Cap Grooved End 6 in | 5010134 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 PSI | 5015029 |
| Cuplng Grooved End 8 in Bolt T-Gasket 800 PSI | 5015030 |
| Cuplng Grooved End 2 in Snap T-Gasket 300 PSI | 5015052 |
| Cuplng Grooved End 2-1/2 in Snap T-Gasket | 5015053 |
| Plug SQ Hd. Galv. 150 PSI 1 NPT | 5068261 |
| Decal MI-Swaco | 8420200 |
| Clone Twin 4 Urethane Complete w/ 1/2 Apex | 9622220 |
| Manifold Overflow D-Silter | 9622485 |
| Elbow Grooved End 90D Poly 2 in | 9622582 |
| Manifold Inlet D-Silter | 9622605 |
| Nameplate ID Product M-I Swaco | 9650360 |
| Cover, Weld Flange 10” PT Mongoose | 9671652-01 |
| Bracket, Mount D-Silter Mud Cleaner w/o Bolt on Flange | 9671853 |
| Weldment Leg HDR Box Mud Cleaner w/o Bolt on Flange | 9671926 |
| Weldment Leg HDR Box Mud Cleaner w/o Bolt on Flange | 9671927 |
| Weldment Leg Header Box Mud Cleaner w/o Bolt on Flange | 9671937 |
| Weldment Leg Header Box Mud Cleaner w/o Bolt on Flange | 9671938 |
| Plate, Slider Bypass D-Silter PT Mongoose Mud Cleaner | 9671941 |
| Weldment, 6T4-8T4 Header Box w/o Flange – Mud Cleaner | 9671945 |
| Weldment, Trough 3-12 D-Sander PT Mongoose Mud Cleaner | 9671960 |
| Nipple Stub Grooved End 6 in x 5 in Lg. | 9697001-12 |
| Nipple Stub Grooved End 8 in x 5 in Lg. | 9677001-13 |
| Label, Do Not Lift | BM6K80122 |
| Flatwasher, M12 Regular, SST | 05-305 |
| Flatwasher M24, Metric, SS | 05-308 |
| Hex Nut, M12, SST | 03-415 |
| Hex Nut M24, Metric, SS | 03-412 |
| HHCS M12 x 35 Metric, 304 SS | 04-1105 |
| HHCS M12 x 45 mm, SS | 04-1270 |
| HHCS M24-3.0 x 90 mm MS, Yellow Chromate, GR 8.8 | 1493003 |
| CVR/Plug- I/O 6” Dia. | S48K00827-NL |
| Lockwasher M12 Split, SS | 05-306 |
| Lockwasher M24 Split, SS | 05-309 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9622220 (Clone Twin 4” Urethane Complete w/ 1/2” Apex) | |
| Description | MI-Swaco P/N |
| Liner Feed Urethane | 9622221 |
| Valve Apex 1/2” | 9622312 |
| Valve Apex 3/8” = 9622338 | |
| Valve Apex 5/8” = 9622358 | |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9671954 ( D-Sander 3-12 Stand w/ Clones Mongoose PT Mud Cleaner) | |
| Description | MI-Swaco P/N |
| Clamping Unit, 5/8” Hose OD, 3 Hose Clamp | 00-1614 |
| U-Bolt CS 10 in Pipe 3/4-10 NC x 13.75 Lg. w/ Nuts | 1289140 |
| U-Bolt CS 10 in Pipe 7/8-9 NC x 16.06 Lg. w/ Nuts | 1289171 |
| DRS #4 x 5/8, 304 SS | 1492031 |
| Gauge 0-60/0-400 KPA 2-1/2 in 1/4 NPT LM | 2422177 |
| Cuplng Grooved End 4 in Bolt T-Gasket 1000 PSI | 5015026 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 PSI | 5015029 |
| Cuplng Grooved End 10 in Bolt T-Gasket 800 PSI | 5015031 |
| Cuplng Grooved End 12 in Bolt T-Gasket 800 PSI | 5015032 |
| Ell Grooved End 90D MI SR Sch 40 6 in | 5030860 |
| Clone Assembly Urethane 12 in Grooved End | 9621280 |
| U-Bolt 7-3/8 in ID 5/8-11 NC x 8-3/4 in Lg. | 9621289 |
| Manifold Inlet 10” Diameter 3-12 Slant Mount D-Sander | 9621325 |
| Manifold 12” Diameter 3-12 Slant Mount D-Sander | 9621326 |
| Nameplate ID Product | 9650360 |
| Weldment, 2-12, 3-12 D-Sander Stand PT Mongoose Mud Cleaner | 9671953 |
| Bracket, Adjustment D-Sander Clones PT Mongoose Mud Cleaner | 9671961 |
| Bracket, Mating 3-12 D-Sander PT Mongoose Mud Cleaner | 9671963 |
| Weldment, Upright D-Sander PT Mongoose Mud Cleaner | 9671964 |
| Weldment, Upright D-Sander PT Mongoose Mud Cleaner | 9671965 |
| Nipple Stub Grooved End 8 in x 5 in Lg. | 9671001-13 |
| Nipple Stub Grooved End 10 in x 5 in Lg. | 9697001-14 |
| Flatwasher M12 Metric 304 SS | 05-305 |
| Flatwasher M8 Metric 304 SS | 05-276 |
| Flatwasher 5/8 304 SS | 05-174 |
| Flatwasher 3/4 304 SS | 05-160 |
| Flatwasher 7/8, 304 SS Type A Plain Narrow | 05-238 |
| Hex Nut M12 Metric 304 SS | 03-415 |
| Hex Nut M8 Metric 304 SS | 03-232 |
| Hex Nut 5/8-NC 304 SS | 03-145 |
| Hex Nut 3/4-NC 304 SS | 03-404 |
| Hex Nut 7/8-NC 304 SS | 03-405 |
| HHCS M12 x 35 Metric 304 SS | 04-1105 |
| HHCS M12 x 40 Metric 304 SS | 04-1106 |
| HHCS M8 x 60 mm Metric 304 SST Hex Head Cap Screw | 04-1451 |
| Lockwasher M12 Split 304 SS | 05-306 |
| Lockwasher M8 Split 304 SS | 05-285 |
| Lockwasher 5/8 Split 304 SS | 05-176 |
| Lockwasher 3/4 Split 304 SST | 05-236 |
| Lockwasher 7/8 Split 316 SS | 05-177 |
| Drawings and Parts List Mongoose PT Mud Cleaner per Assembly 9621280 (Clone Ass’y Urethane 12 in Grooved End ) | |
| Description | Part Number |
| Feed 12” Feed Section w/ Victaulic End | 9621281 |
| Body Main 12” Close Urethane | 9621173 |
| Body Mid 12” Clone Urethane | 9621175 |
| Valve 1-1/2” Apex Clone Urethane | 9621174 |
| Clamp V-Band 16.12 I.D., 12” Clone | 9621177 |
| Clamp V-Band 9.88 I.D., 12” Clone | 9621176 |
| Recommended Spare Parts for Assemblies 9671903-01 and 9671903-02 | |
| Description | MI-Swaco P/N |
| Screen Mesh 10 | JMONMK010P |
| Screen Mesh 20 | JMONMK020P |
| Screen Mesh 30 | JMONMK030P |
| Screen Mesh 40 | JMONMK040P |
| Screen Mesh 24 | JMONMK024P |
| Screen Mesh 38 | JMONMK038P |
| Screen Mesh 50 | JMONMK050P |
| Screen Mesh 70 | JMONMK070P |
| Screen Mesh 84 MAGNUM | JMONMG084P |
| Screen Mesh 110 MAGNUM | JMONMG110P |
| Screen Mesh 140 MAGNUM | JMONMG140P |
| Screen Mesh 175 MAGNUM | JMONMG175P |
| Screen Mesh 210 MAGNUM | JMONMG210P |
| Screen Mesh 250 MAGNUM | JMONMG250P |
| Screen Mesh 84 MX | JMONMX084P |
| Screen Mesh 110 MX | JMONMX110P |
| Screen Mesh 140 MX | JMONMX140P |
| Screen Mesh 175 MX | JMONMX175P |
| Screen Mesh 210 MX | JMONMX210P |
| Screen Mesh 250 MX | JMONMX250P |
| Screen Mesh 84 HC-MAGNUM | JMONHC084P |
| Screen Mesh 110 HC-MAGNUM | JMONHC110P |
| Screen Mesh 140 HC-MAGNUM | JMONHC140P |
| Screen Mesh 175 HC-MAGNUM | JMONHC175P |
| Screen Mesh 210 HC-MAGNUM | JMONHC210P |
| Screen Mesh 250 HC-MAGNUM | JMONHC250P |
| Screen Mesh 325 HC-MAGNUM | JMONHC325P |
| Reset Buttons | 7573290 |
| Selector Switch | 7573106 |
| E-Stop “Push-Pull” | 7573105 |
| Transformer (380V) | 7790016 |
| Fuse Block | 7519002 |
| Timer | 7117005 |
| Overload Blocks | 7150002 |
| Contactors- Non. Rev. | 7150001 |
| Contactor-Reversing | 6930009 |
| Mechanical Push Rod | 8071702 |
| Overload Heaters | 7152606 |
| Overload Heaters | 7152605 |
| Fuse | 7518022 |
| Fuses | 7518020 |
| Mtr. 1.75 Hp 220-240/380-415V, 50/3/1500 | EM3C00010 |
| Mtr. 220/380V, 0.60, 50/3/1500 | 6905003 |
| Lockwasher 1 SHKPRF Ext. MS | 05-110 |
| Locknut Electrical 3/4 | 01-184 |
| Cord Grip 3/4 NPT St. .625-.750 Range Alum. Male | 01-106 |
| Bushing Conduit Redcr. EP 3/4 MPT x 1/2 FPT | 5008937 |
| Connector Cable EP 1/2 NPT, .51-.81 Dia. Armored | 6560030 |
| Ell. Conduit EP 90 3/4 MPT x 3/4 FPT | 5030937 |
| Cable Armored 4 Cond. 12 AWG w\ Jacket | 7906218 |
| Jack Assembly Lifting | 9671681 |
| Nut Hex Plt. M20-1.5 Grade 10.9, Yellow Chromate | 1305055 |
| Screw Hex Hd. Plt. M20-1.5 x 120 mm, Yellow Chromate | 1407169 |
| CVR/Plug- I/O 6” Dia. | S48K00827-NL |
| Spring Coil 7 inch Inline Shaker | 9360007 |
| Lockwasher Schnorr M20 Metric Motor Washer | 05-244 |
| Motor Washer, SS | BM6Y80043-01XB |
| Washer, 16 mm Motor | 9671682 |
| Lockwasher Schnorr, M16 Metric Motor Washer | 05-248 |
| Screw Hex HD Plt. M16-1.5 x 100 mm, Grd. 10.9 Yellow Chromate | 1407144 |
| Washer Spring Isolation High Grade Nitrile 70 Shore A | 5895002 |
| Nut Hex Plt. M16-1.5, Grd. 10.9 Yellow Chromate | 1305040 |
| Gasket Ring ANSI Flange RF 150 LB 10 in | 3916067 |
| Boot, Spring | 5804004 |
| Wedge Screen Clamping Mongoose 75 Shore D Polyurethane Black | 5895001 |
| Skirt Mongoose Feed End High Grade Nitrile 80 Shore A | 5873004 |
| Gasket Compression “P” Screen Bed Mongoose | 5837001 |
| Weldment, Screen Gasket Hold Down Bar | 9671640 |
| Grommet Screw .273 Sq. Panel Hole, Panel Thk. 0.31-.156 | 07-415 |
| Screw Flat HD CRSK Sheet Metal 8-32 x 1” Lg., SS, Sq. Head | 1447471 |
| Gauge 0-60 PSI / 0-400 KPa 2-1/2 in 1/4 NPT LM | 2422177 |
| Gasket Ring ANSI Flange RF 150 LB, 10 in | 3916067 |
| Cap Grooved End 6 in | 5010134 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 psi | 5015029 |
| Cuplng Grooved End 8 in Bolt T-Gasket 800 psi | 5015030 |
| Cuplng Grooved End 2 in Bolt T-Gasket 300 psi | 5015052 |
| Cuplng Grooved End 2-1/2 in Snap T-Gasket | 5015053 |
| Plug SQ Hd. Galv. 150 psi 1 NPT | 5068261 |
| Clone Twin 4 Urethane Complete w/ 1/2 Apex | 9622220 |
| Manifold Inlet 6T4 D-Silter ALS Mud Cleaner | 9622491 |
| Manifold OF 6T4 D-Silter ALS Mud Cleaner | 9622942 |
| Elbow Grooved End 90 Poly 2 in | 9622582 |
| Nipple Stub Grooved End 6 in x 5 in Lg. | 9697001-12 |
| Nipple Stub Grooved End 8 in x 5 in Lg. | 9697001-13 |
| CVR/Plug – I/O 6” Dia. | S48K00827-NL |
| Liner Feed Urethane | 9622221 |
| Valve Apex 1/2” | 9622312 |
| Clamping Unit, 5/8” Hose OD, 3 Hose Clamp | 00-1614 |
| U-Bolt CS 10 in Pipe 3/4-10 NC x 13.75 Lg. w/ Nuts | 1289140 |
| U-Bolt CS 12 in Pipe 7/8-9 NC x 16.06 Lg. w/ Nuts | 1289171 |
| Gauge 0-60/0-400 KPA 2-1/2 in 1/4 NPT LM | 2422177 |
| Cuplng Grooved End 4 in Bolt T-Gasket 1000 PSI | 5015026 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 PSI | 5015029 |
| Cuplng Grooved End 10 in Bolt T-Gasket 800 PSI | 5015031 |
| Cuplng Grooved End 12 in Bolt T-Gasket 800 PSI | 5015032 |
| Ell Grooved End 90D MI SR Sch 40 6 in | 5030860 |
| Clone Assembly Urethane 12 in Grooved End | 9621280 |
| U-Bolt 7-3/8 in ID 5/8-11 NC x 8-3/4 in Lg. | 9621289 |
| Manifold Inlet 10” Diameter 3-12 Slant Mount D- Sander | 9621325 |
| Manifold 12” Diameter 3-12 Slant Mount D-Sander | 9621326 |
| Feed 12” Feed Section w/ Victaulic End | 9621281 |
| Body Main 12” Close Urethane | 9621173 |
| Body Mid 12” Clone Urethane | 9621175 |
| Valve 1-1/2” Apex Clone Urethane | 9621174 |
| Clamp V-Band 16.12 I.D., 12” Clone | 9621177 |
| Clamp V-Band 9.88 I.D., 12” Clone | 9621176 |
| Recommended Spare Parts for Assembly 9671903-02 | |
| Description | MI-Swaco P/N |
| Screen Mesh 10 | JMONMK010P |
| Screen Mesh 20 | JMONMK020P |
| Screen Mesh 30 | JMONMK030P |
| Screen Mesh 40 | JMONMK040P |
| Screen Mesh 24 | JMONMK024P |
| Screen Mesh 38 | JMONMK038P |
| Screen Mesh 50 | JMONMK050P |
| Screen Mesh 70 | JMONMK070P |
| Screen Mesh 84 MAGNUM | JMONMG084P |
| Screen Mesh 110 MAGNUM | JMONMG110P |
| Screen Mesh 140 MAGNUM | JMONMG140P |
| Screen Mesh 175 MAGNUM | JMONMG175P |
| Screen Mesh 210 MAGNUM | JMONMG210P |
| Screen Mesh 250 MAGNUM | JMONMG250P |
| Screen Mesh 84 MX | JMONMX084P |
| Screen Mesh 110 MX | JMONMX110P |
| Screen Mesh 140 MX | JMONMX140P |
| Screen Mesh 175 MX | JMONMX175P |
| Screen Mesh 210 MX | JMONMX210P |
| Screen Mesh 250 MX | JMONMX250P |
| Screen Mesh 84 HC-MAGNUM | JMONHC084P |
| Screen Mesh 110 HC-MAGNUM | JMONHC110P |
| Screen Mesh 140 HC-MAGNUM | JMONHC140P |
| Screen Mesh 175 HC-MAGNUM | JMONHC175P |
| Screen Mesh 210 HC-MAGNUM | JMONHC210P |
| Screen Mesh 250 HC-MAGNUM | JMONHC250P |
| Screen Mesh 325 HC-MAGNUM | JMONHC325P |
| Reset Buttons | 7573290 |
| Selector Switch | 7573106 |
| E-Stop “Push-Pull” | 7573105 |
| Transformer (380V) | 7790016 |
| Fuse Block | 7519002 |
| Timer | 7117005 |
| Overload Blocks | 7150002 |
| Contactors- Non. Rev. | 7150001 |
| Contactor-Reversing | 6930009 |
| Mechanical Push Rod | 8071702 |
| Overload Heaters | 7152606 |
| Overload Heaters | 7152605 |
| Fuse | 7518022 |
| Fuses | 7518020 |
| Mtr. 1.75 Hp 220-240/380-415V, 50/3/1500 | EM3C00010 |
| Mtr. 220/380V, 0.60, 50/3/1500 | 6905003 |
| Lockwasher 1 SHKPRF Ext. MS | 05-110 |
| Locknut Electrical 3/4 | 01-184 |
| Cord Grip 3/4 NPT St. .625-.750 Range Alum. Male | 01-106 |
| Bushing Conduit Redcr. EP 3/4 MPT x 1/2 FPT | 5008937 |
| Connector Cable EP 1/2 NPT, .51-.81 Dia. Armored | 6560030 |
| Ell. Conduit EP 90 3/4 MPT x 3/4 FPT | 5030937 |
| Cable Armored 4 Cond. 12 AWG w\ Jacket | 7906218 |
| Jack Assembly Lifting | 9671681 |
| Nut Hex Plt. M20-1.5 Grade 10.9, Yellow Chromate | 1305055 |
| Screw Hex Hd. Plt. M20-1.5 x 120 mm, Yellow Chromate | 1407169 |
| CVR/Plug- I/O 6” Dia. | S48K00827-NL |
| Spring Coil 7 inch Inline Shaker | 9360007 |
| Lockwasher Schnorr M20 Metric Motor Washer | 05-244 |
| Motor Washer, SS | BM6Y80043-01XB |
| Washer, 16 mm Motor | 9671682 |
| Lockwasher Schnorr, M16 Metric Motor Washer | 05-248 |
| Screw Hex HD Plt. M16-1.5 x 100 mm, Grd. 10.9 Yellow Chromate | 1407144 |
| Washer Spring Isolation High Grade Nitrile 70 Shore A | 5895002 |
| Nut Hex Plt. M16-1.5, Grd. 10.9 Yellow Chromate | 1305040 |
| Gasket Ring ANSI Flange RF 150 LB 10 in | 3916067 |
| Boot, Spring | 5804004 |
| Wedge Screen Clamping Mongoose 75 Shore D Polyurethane Black | 5895001 |
| Skirt Mongoose Feed End High Grade Nitrile 80 Shore A | 5873004 |
| Gasket Compression “P” Screen Bed Mongoose | 5837001 |
| Weldment, Screen Gasket Hold Down Bar | 9671640 |
| Grommet Screw .273 Sq. Panel Hole, Panel Thk. 0.31-.156 | 07-415 |
| Screw Flat HD CRSK Sheet Metal 8-32 x 1” Lg., SS, Sq. Head | 1447471 |
| Gauge 0-60 PSI / 0-400 KPa 2-1/2 in 1/4 NPT LM | 2422177 |
| Gasket Ring ANSI Flange RF 150 LB, 10 in | 3916067 |
| Cap Grooved End 6 in | 5010134 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 psi | 5015029 |
| Cuplng Grooved End 8 in Bolt T-Gasket 800 psi | 5015030 |
| Cuplng Grooved End 2 in Bolt T-Gasket 300 psi | 5015052 |
| Cuplng Grooved End 2-1/2 in Snap T-Gasket | 5015053 |
| Plug SQ Hd. Galv. 150 psi 1 NPT | 5068261 |
| Clone Twin 4 Urethane Complete w/ 1/2 Apex | 9622220 |
| Manifold Overflow D-Silter | 9622485 |
| Elbow Grooved End 90 Poly 2 in | 9622582 |
| Manifold Inlet D-Silter | 9622605 |
| Nipple Stub Grooved End 6 in x 5 in Lg. | 9697001-12 |
| Nipple Stub Grooved End 8 in x 5 in Lg. | 9697001-13 |
| CVR/Plug – I/O 6” Dia. | S48K00827-NL |
| Liner Feed Urethane | 9622221 |
| Valve Apex 1/2” | 9622312 |
| Clamping Unit, 5/8” Hose OD, 3 Hose Clamp | 00-1614 |
| U-Bolt CS 10 in Pipe 3/4-10 NC x 13.75 Lg. w/ Nuts | 1289140 |
| U-Bolt CS 12 in Pipe 7/8-9 NC x 16.06 Lg. w/ Nuts | 1289171 |
| Gauge 0-60/0-400 KPA 2-1/2 in 1/4 NPT LM | 2422177 |
| Cuplng Grooved End 4 in Bolt T-Gasket 1000 PSI | 5015026 |
| Cuplng Grooved End 6 in Bolt T-Gasket 1000 PSI | 5015029 |
| Cuplng Grooved End 10 in Bolt T-Gasket 800 PSI | 5015031 |
| Cuplng Grooved End 12 in Bolt T-Gasket 800 PSI | 5015032 |
| Ell Grooved End 90D MI SR Sch 40 6 in | 5030860 |
| Clone Assembly Urethane 12 in Grooved End | 9621280 |
| U-Bolt 7-3/8 in ID 5/8-11 NC x 8-3/4 in Lg. | 9621289 |
| Manifold Inlet 10” Diameter 3-12 Slant Mount D- Sander | 9621325 |
| Manifold 12” Diameter 3-12 Slant Mount D-Sander | 9621326 |
| Feed 12” Feed Section w/ Victaulic End | 9621281 |
| Body Main 12” Close Urethane | 9621173 |
| Body Mid 12” Clone Urethane | 9621175 |
| Valve 1-1/2” Apex Clone Urethane | 9621174 |
| Clamp V-Band 16.12 I.D., 12” Clone | 9621177 |
| Clamp V-Band 9.88 I.D., 12” Clone | 9621176 |