Description
| TDS-11SA Top Drive Drilling System Technical Drawings TDP0020-TOC | |||||
| Technical Drawings | |||||
| Drawings by assembly | |||||
| General Arrangement | 128920 | ||||
| Guide Beam Kit | 124519 | ||||
| Hydraulic Kit | 121403 | ||||
| Pre-fill Valve Assembly | 111712 | ||||
| Hydraulic Schematic | 109550 | ||||
| Intermediate Tieback | 122333 | ||||
| Software Package, Siemens | 125619 | ||||
| Software Package, IDM | 141685 | ||||
| Universal Tieback Kit | 117977 | ||||
| Top Drive | |||||
| Bail Package | 121442 | ||||
| Carriage Package | 124540 | ||||
| Carriage Assembly (Left) | 124538 | ||||
| Carriage Assembly (Right) | 124539 | ||||
| Counterbalance Package | 112190 | ||||
| Cylinder Assembly | 110703 | ||||
| Cylinder Assembly | 110704 | ||||
| Motor Housing Assembly | 120900 | ||||
| AC Drill Motor Assembly (Helical) | 118217 | ||||
| Washpipe Assembly | 123290 | ||||
| Lube Pump Assembly | 117603 | ||||
| Hydraulic Oil Reservoir Assembly | 110068 | ||||
| Rotating Link Adapter Assembly | 121341 | ||||
| Shot Pin Assembly | 118173 | ||||
| S-Pipe Package | 120037 | ||||
| Pipe Handler | |||||
| PH-50 Tool Joint Adapter Kit | 122747 | ||||
| Pipe Handler Package, PH-50 | 117820 | ||||
| Hydraulic Cylinder Assembly | 119592 | ||||
| IBOP, Lower | 114706 | ||||
| IBOP, Upper | 110103 | ||||
| IBOP (External) Crank Assembly | 98898 | ||||
| Jaw Assembly (4-5″ OD OD Tool Joint) | 80492 | ||||
| Jaw Assembly (5.25-6.63″ OD OD Tool Joint, 4 1/2 NC50) | 85786-2 | ||||
| Jaw Assembly (6.65-7.50″ OD OD Tool Joint) | 122109 | ||||
| Link Tilt Crank Assembly | 119545 | ||||
| Manifold Link Tilt Cylinder | 118463 | ||||
| Stabbing Guide Assembly (4-5″ OD OD Tool Joint) | 118250 | ||||
| Stabbing Guide Assembly (5.25-6.63″ OD Tool Joint) | 118249 | ||||
| Stabbing Guide Assembly (6.65-7.50″ OD OD Tool Joint) | 123114 | ||||
| Torque Wrench Assembly | 117821 | ||||
| Clamp Cylinder Manifold Assembly | 118511 | ||||
| Cylinder Assembly, Clamp | 117941 | ||||
| Cylinder Assembly, IBOP Actuator | 118510 | ||||
| Pipe Handler Kit, PH-50 | 119054 | ||||
| Cabling | |||||
| Incoming Power Cable Kit | 125274 | ||||
| Rig Cabling Diagram | 128919 | ||||
| Control System | |||||
| Control House Assembly | 124221 | ||||
| VDC Cable | 122443 | ||||
| Filter/Regulator Assembly | 88550 | ||||
| Siemens Drive Parameters | 124965 | ||||
| IDM Drive Parameters | 128544 | ||||
| Rigging | |||||
| Guide Beam Support Bracket (Padeye) | 106046 | ||||
| Traveling Equipment Attachment Kit | 118244 | ||||
| Grounding Rod Kit | 116004 | ||||
| Shipping Package | 124972 | ||||
| Optional/Auxiliary Equipment | |||||
| Fluids/Lubrication Kit | 92643 | ||||
| Master Bushing ID Wear Guide | 85974 | ||||
| Wireline Adapter Bracket Assembly | 114032 | ||||
| Additional drawings for: | |||||
| UL, Single Loop, Portable | |||||
| System Schematic, Siemens | 124222 | ||||
| System Schematic, IDM | 128215 | ||||
| Electrical Package | 128923 | ||||
| Manifold Assembly | 114174 | ||||
| Pump/Motor Assembly | 114113 | ||||
| Service Loop Kit (4 x 777) | 128927 | ||||
| Derrick Loop Kit | 128929 | ||||
| Jumper Cable Kit (House to Derrick Loop) | 124977 | ||||
| Derrick Termination Kit | 126815 | ||||
| Varco Driller’s Control (VDC) Kit with Pigtails | 120546 | ||||
| Driller’s Recorder Transducer Kit | 80149 | ||||
| Drawing list (numeric order) | |||||
| Driller’s Recorder Transducer Kit | 80149 | ||||
| Jaw Assembly (4-5″ OD OD Tool Joint) | 80492 | ||||
| Jaw Assembly (5.25-6.63″ OD OD Tool Joint, 4 1/2 NC50) | 85786-2 | ||||
| Master Bushing ID Wear Guide | 85974 | ||||
| Filter/Regulator Assembly | 88550 | ||||
| Fluids/Lubrication Kit | 92643 | ||||
| IBOP (External) Crank Assembly | 98898 | ||||
| Guide Beam Support Bracket (Padeye) | 106046 | ||||
| Hydraulic Schematic | 109550 | ||||
| Hydraulic Oil Reservoir Assembly | 110068 | ||||
| IBOP, Upper | 110103 | ||||
| Cylinder Assembly | 110703 | ||||
| Cylinder Assembly | 110704 | ||||
| Pre-fill Valve Assembly | 111712 | ||||
| Counterbalance Package | 112190 | ||||
| Wireline Adapter Bracket Assembly | 114032 | ||||
| Pump/Motor Assembly | 114113 | ||||
| Manifold Assembly | 114174 | ||||
| IBOP, Lower | 114706 | ||||
| Grounding Rod Kit | 116004 | ||||
| Lube Pump Assembly | 117603 | ||||
| Pipe Handler Package, PH-50 | 117820 | ||||
| Torque Wrench Assembly | 117821 | ||||
| Cylinder Assembly, Clamp | 117941 | ||||
| Universal Tieback Kit | 117977 | ||||
| Shot Pin Assembly | 118173 | ||||
| AC Drill Motor Assembly (Helical) | 118217 | ||||
| Traveling Equipment Attachment Kit | 118244 | ||||
| Stabbing Guide Assembly (5.25-6.63″ OD Tool Joint) | 118249 | ||||
| Stabbing Guide Assembly (4-5″ OD OD Tool Joint) | 118250 | ||||
| Manifold Link Tilt Cylinder | 118463 | ||||
| Cylinder Assembly, IBOP Actuator | 118510 | ||||
| Clamp Cylinder Manifold Assembly | 118511 | ||||
| Pipe Handler Kit, PH-50 | 119054 | ||||
| Link Tilt Crank Assembly | 119545 | ||||
| Hydraulic Cylinder Assembly | 119592 | ||||
| S-Pipe Package | 120037 | ||||
| Varco Driller’s Control (VDC) Kit with Pigtails | 120546 | ||||
| Motor Housing Assembly | 120900 | ||||
| Rotating Link Adapter Assembly | 121341 | ||||
| Hydraulic Kit | 121403 | ||||
| Bail Package | 121442 | ||||
| Jaw Assembly (6.65-7.50″ OD OD Tool Joint) | 122109 | ||||
| Intermediate Tieback | 122333 | ||||
| VDC Cable | 122443 | ||||
| PH-50 Tool Joint Adapter Kit | 122747 | ||||
| Stabbing Guide Assembly (6.65-7.50″ OD OD Tool Joint) | 123114 | ||||
| Washpipe Assembly | 123290 | ||||
| Control House Assembly | 124221 | ||||
| System Schematic, Siemens | 124222 | ||||
| Guide Beam Kit | 124519 | ||||
| Carriage Assembly (Left) | 124538 | ||||
| Carriage Assembly (Right) | 124539 | ||||
| Carriage Package | 124540 | ||||
| Siemens Drive Parameters | 124965 | ||||
| Shipping Package | 124972 | ||||
| Jumper Cable Kit (House to Derrick Loop) | 124977 | ||||
| Incoming Power Cable Kit | 125274 | ||||
| Software Package, Siemens | 125619 | ||||
| Derrick Termination Kit | 126815 | ||||
| System Schematic, IDM | 128215 | ||||
| IDM Drive Parameters | 128544 | ||||
| Rig Cabling Diagram | 128919 | ||||
| General Arrangement | 128920 | ||||
| Electrical Package | 128923 | ||||
| Service Loop Kit (4 x 777) | 128927 | ||||
| Derrick Loop Kit | 128929 | ||||
| Software Package, IDM | 141685 | ||||
| 80492 | Jaw Assembly (4-5″ OD OD Tool Joint) | ||||
| 51435-16-S | PIN, COTTER | ||||
| 50514-C | NUT, HEX HD | ||||
| 16781 | DIE, TONG | ||||
| 76444-2 | BOLT | ||||
| 76444-1 | BOLT | ||||
| 78051 | DIE RETAINER | ||||
| 79859 | JAW | ||||
| 85786 | JAW ASSY (4 1/2 NC50) | ||||
| 73342-1 | JAW | ||||
| 73342-3 | JAW | ||||
| 51435-16-S | PIN, COTTER | ||||
| 50514-C | NUT, HEX HD | ||||
| 76444-2 | BOLT, RETAINER | ||||
| 76444-1 | BOLT, RETAINER | ||||
| 76406 | PETAINDER, DIE | ||||
| 73342 | JAW | ||||
| 16401-2 | DIE, TONG | ||||
| 85974 | MASTER BUSHING ID WEAR GUIDE | ||||
| 85982-502 | BASE WELDMENT | ||||
| Z60001 | LOCKWIRE, Φ.051 | ||||
| 92045-1 | BUSHING, GUIDE-6 5/8“ PIPE ID=8.63 | ||||
| 92045 | BUSHING, GUIDE-5” PIPE ID=7.50 | ||||
| 51205-11 | RETAINING PIN | ||||
| 3696 | ECCENTRIC PIN | ||||
| 3698 | LOCK | ||||
| 85982-501 | BASE WELDMENT | ||||
| 80740-1 | BUSHING, GUIDE-6 5/8” DRILL PIPE ID=8.63 | ||||
| 53201 | FITTING GREASE | ||||
| 80740 | BUSHING, GUIDE-5” DRILL PIPE ID=7.50 | ||||
| 51403-12-S | PIN, COTTER | ||||
| 50512-C | NUT, HEX SLOTTED | ||||
| 78983 | SCREW, CAP HEX HD | ||||
| 80770 | CAP, HINGE PIN | ||||
| 50912-C | WASHER, LOCK | ||||
| 50012-26-C5 | SCREW, CAP HEX HD | ||||
| 80741-500 | PLATE, HINGED BUSHING REX | ||||
| 80741-501 | PLATE, HINGED BUSHING RET. | ||||
| 85982 | BASE WELDMENT | ||||
| 88550 | FIT, REGULATOR ASSY | ||||
| 5390B-8R | NIPPLE, CLOSE 1/2NPT | ||||
| 88549 | REGULATOR, AIR 1/2 PORT 5-125PSIS | ||||
| 88548 | FILTER, AIR-OIL REMOVAL 1/2 PORT | ||||
| 88547 | FILTER, AIR 50UM MICRON 1/2 PORT | ||||
| 92643 | Fluids Lubrication Kit | ||||
| 56521-12-8 | ADAPTER, INT PIPE/37° | ||||
| 56506-12-8 | ELBOW,90S EXT PIPE/37° | ||||
| 56501-12-8 | CONNECTOR, EXT PIPE/37° | ||||
| 58872P290180 | HOSE ASSY, 180°, 2 X3.4″-37° INT | ||||
| 55912-12-12 | VALVED COUPLER, QD, 3/4″ MALE NPT | ||||
| 55914-12 | PLUG, DUST, 3/4 | ||||
| 97507-1 | PUMP, LUBE OIL, 10GPM, 3/4 NPT DISCHARGE | ||||
| 56001 | OIL, HYDRAULIC, 55 GAL DRUM | ||||
| 53201 | FITTING, GREASE, STRAIGHT | ||||
| 56004-2 | OIL, GEAR, HIGH TEMP, ABOVE 38℃ 100ft | ||||
| 56004-1 | OIL, GEAR, LOW TEMP BELOW -20℃ | ||||
| 56004 | OIL, GEAR, STD TEMP -20℃ TO 38℃ | ||||
| 98898 | CRANK ASSEMBLY. IBOP | ||||
| 53200-271 | COMPOUND, LOCKING | ||||
| 51300-220-B | O-RING | ||||
| 53201 | FITTING, GREASE, STRAIGHT (.125-27 NPT) | ||||
| 79825 | ROLLER BEARING | ||||
| 79824 | CAM FOLLOWER | ||||
| 99168 | SPACER | ||||
| 98899 | ARM, CRANK (MACHINING) | ||||
| 98897 | CRANK HOUSING (MACHINING) | ||||
| 106046 | BRACKET, SUPPORT-GUIDE BEAM | ||||
| 106046-4 | PLATE, 3/4” THK | MS00017 | |||
| 106046-2 | PLATE | MS00010 | |||
| 106046-1 | PLATE | MS00006 | |||
| 109550 | HYDRAULIC SCHEMATIC TDS-9S/11S | ||||
| 110068 | RESERVOIR, HYDRAULIC OIL ASSEMBLY | ||||
| 110078-L18 | CABLE, SAFTY Φ.032 | ||||
| 110078-FL2 | CABLE, SAFETY FERRULE | ||||
| 56506-8-6-S | ELEBOW, 90° EXT/37° | ||||
| 56506-12-12S | ELEBOW, 90° EXT/37° | ||||
| 30113165 | VALVE, RELIEF-POPOFF | ||||
| 53000-12-S | PLUG, PIPE | ||||
| 108119-16B | SIGHT GAGE | ||||
| 71613 | RESERVOIR BREATHER | ||||
| 53418 | CAP, PLASTIC PIPE 1 5/16 SAE | ||||
| 53406 | CAP, PLASTIC PIPE 9/16 SAE | ||||
| 53415 | CAP, PLASTIC PIPE 1 1/16 SAE | ||||
| 56506-16-16S | ELEBOW, 90° EXT/37° | ||||
| 107865-16 | STRAINER, SUMP | ||||
| 50904-C | WASHER, LOCK-REGULAR | ||||
| 50004-5-SD | SCREW, CAP-HEX HEAD(UNC-2A) | ||||
| 50004-10-SD | SCREW, CAP-HEX HEAD(UNC-2A) | ||||
| 51300-038-B | O RING | ||||
| 110132 | GASKET | ||||
| 111915 | COVER TOP, RESERVOIR | ||||
| 110191-501 | BLADDER, RESERVIOR (5 GALLONS) | ||||
| 110191-500 | BLADDER, RESERVIOR (4 GALLONS) | ||||
| 110067 | RESERVOIR, HYDRAULIC OIL | ||||
| 110103 | ASSEMBLY, UPPER IBOP, 6 5/5″ X 6 5/5″ PH-50 | ||||
| -500, STD, 15 KSI | -501, NAM, 15 KSI | -502, H2S, 15 KSI | |||
| DESCRIPTION | BEST NO. | VARCO NO. | BEST NO. | VARCO NO. | BEST NO. |
| VALVE ASSY. | N/A | 110103-500 | N/A | 110103-501 | N/A |
| REPAIR KIT- COMPLETE | N/A | 114859 | N/A | 114859 | N/A |
| REPAIR KIT- SOFT SEALS | N/A | 114859-1 | N/A | 114859-1 | N/A |
| WRENCH- CRANK | 65021520 | 77408 | 65021520 | 77408 | 65021520 |
| PULLER- SEAT | 65021523 | 79489-14 | 65021523 | 79489-14 | 65021523 |
| WRENCH- NUT | 65060325 | 89141-18 | 65060325 | 89141-18 | 65060325 |
| PART NO. | DESCRIPTION | BEST PART NO. | |||
| 65020193 | THREAD PROTECTOR-6 5/8”（NOT SHOWN) | 77369-5 | |||
| 650210B0 | PLUG. PRESSURE | 91137-10 | |||
| 65060192 | RETAINING RING (H2S) | 89453-1 | |||
| 65060191 | RETAINING RING | 89141-1 | |||
| 6506049? | NYLON PLUG | 91137-12 | |||
| 65060199 | BACK-UP RING | 89453-17 | |||
| 65060197 | BACK-UP RING | 90441-10 | |||
| 65060198 | O-RING | 89453-16 | |||
| 65060196 | O-RING | 90441-9 | |||
| 65060696 | SEAL. U-CUP | 96439-1 | |||
| 65060695 | SEAL. U-CUP | 96439 | |||
| 96438 | STABILIZER. SEAL RING | 65060625 | |||
| 65021193 | BACK-UP RING | 89453-13 | |||
| 65021191 | BACK-UP RING | 89141-13 | |||
| 65021192 | O-RING | 89453-3 | |||
| 65021190 | O-RING | 89141-3 | |||
| 65021491 | SPRING. WAVE | 89453-9 | |||
| 65021490 | SPRING. WAVE | 89141-9 | |||
| 30177893 | SET. SEAT/BALL | ||||
| 30177204 | SET. SEAT/BALL | ||||
| 65060794 | BACK-UP RING | 89453-12 | |||
| 65060792 | BACK-UP RING | 89141-12 | |||
| 65060793 | O-RING | 89453-11 | |||
| 65060791 | O-RING | 89141-11 | |||
| 98895 | SLEEVE. CRANK | ||||
| 65060691 | SEAL. CROWN | 89453-8 | |||
| 65060690 | SEAL. CROWN | 89141-8 | |||
| 114901 | CRANK. OPER-L.H. | ||||
| 110128 | CRANK. OPER.-L.H. | ||||
| 30114902 | CRANK. OPER.-R.H. | ||||
| 110118 | CRANK. OPER.-R.H. M, | ||||
| BODY IBOP | |||||
| 110102 | BODY IBOP | ||||
| 110703 | CYLINDER ASSEMBLY, COUNTERBALANCE | ||||
| Z6001 | LOCKWIRE Φ.051 | ||||
| 50516-C | NUT, HEX SLOTTED | ||||
| 30172176-502 | PIN, CLEVIS, CYUNDER COUNTERBALANCE | ||||
| 110078-FL2 | CABLE, SAFETY, FERRULE Φ.032 | ||||
| 110078-L36 | CABLE, SAFETY, Φ.032 | ||||
| 51437-16-S | PIN, COTTER | ||||
| 50806-N-C | WASHER, FIAT | ||||
| 50006-20-C50 | SCREW, CAP-HEX HEAD (UNC-2A) | ||||
| 51300-214B | O-RING | ||||
| 56519-12-12S | ELBOW, 0-RING BOSS / 37° | ||||
| 87196-12-S | PLUG, SAE-12 HEX SOCKET | ||||
| 30172176-BSC | PIN, CLEVIS, CYUNDER COUNTERBALANCE | ||||
| 94522-21N | VALVE CMRIDGE, PRESSURE REUEF, DIRECT ACTING | ||||
| 111936 | TUBE, CYUNDER, COUNTERBALANCE | ||||
| 110716-2 | MANIFOLD, REUEF COUMIERBALANCE | ||||
| 111935 | CLEVIS, ROD END, CYUNDER, COUNTERBALANCE | ||||
| 110687 | CYLINDER, 4″, C*BAL | ||||
| 110704 | CYLINDER ASSEMBLY, COUNTERBALANCE | ||||
| 56519-12-12-S | ELBOW, O-RING BOSS/37° | ||||
| Z6001 | LOCKWIRE Φ.051 | ||||
| 50516-C | NUT, HEX SLOTTED | ||||
| 50906-C | LOCK WASHER | ||||
| 50006-12-C5D | SCREW | ||||
| 110078-FL2 | CABLE, SAFE1T, FERRULE Φ.032 | ||||
| 110078-L36 | CABLE, SAFETY, Φ.032 | ||||
| 51437-16-S | PIN, COTTER | ||||
| 87196-12-S | PLUG, SAE-12 HEX SOCKET | ||||
| 30172176-502 | PIN, CLEVIS, CYUNDER, COUNTERBALANCE | ||||
| 30172176-BSC | PIN, CLEVIS, CYLINDER, COUNTERBALANCE | ||||
| 94681-12 | BLIND FLANGE KIT, CODE 61 | ||||
| 111935 | CLEVIS, ROD END, CYUNDER, COUNTERBALANCE | ||||
| 110687 | CYLINDER, 4″, C*BAL | ||||
| 111712 | VALVE, ASSY, PRE-FILL | ||||
| 110078-FL2 | FERRULE, SAFETY | ||||
| 110078-L24 | TOOL, SAFETY CABLE | ||||
| 56529-12-12S | CONN., O-RING BOSS/37″ | ||||
| 56531-12-S | PLUG, O-RING BOSS | ||||
| 53200-242 | LOCKTITE, BLULOCK | ||||
| 56519-12-12S | SAE -12 ELBOW, O-RING BOSS/37° | ||||
| 56519-6-6-S | SAE -6 ELBOW, O-RING BOSS/37° | ||||
| NOT USED | |||||
| 56519-16-12S | SAE -16 ELBOW, 0-RING B0SS/37 | ||||
| 87196-4-S | SAE J514-4 HEX SOCKET PLUG | ||||
| 87196-2-S | SAE J514-2 HEX SOCKET PLUG | ||||
| 50108-14-BD | SOCKET CAP SCREW .50-13 X 1.75 | ||||
| 93024-4SAE | SAE -4 TEST FITTING | ||||
| 93019-19 | ORIFICE PLUG, .25-28 X .075 DIA. | ||||
| 94536-175N | CHECK VALVE, T-13A, 75 PSID | ||||
| 92654 | CHECK VALVE, .187 DIA. | ||||
| 109498-800D | LEE JET, 8000 LOHM | ||||
| 105643-12 | O-RING, 3-912 | ||||
| 53600-40 | RETAINING RING, EXTERNAL | ||||
| 53500-68 | RETAINING RING, INTERNAL | ||||
| 112825 | VALVE, MODIHED-LOGiC CARTRIDGE INSERT | ||||
| 111711 | GUIDE DISC | ||||
| 111710 | GUIDE ROD | ||||
| 111709 | PLUG, SAE J514-12 SPECIAL | ||||
| 111708 | COVER, 25 mm MODIFIED | ||||
| 111707-2 | VALVE BODY | ||||
| 112190 | PACKAGE COUNTERBALANCE 9S | ||||
| 81560 | TAG, WARNING | ||||
| 59144P290099 | HOSE ASSY, HYDRAULIC-HIGH PRESSURE | ||||
| 59124P290093 | HOSE ASSY, HYDRAULIC-HIGH PRESSURE | ||||
| 59143P290086 | HOSE ASSY, HYDRAULIC-HIGH PRESSURE | ||||
| 56519-12-12-S | ELBOW, O-RING BOSS/37° | ||||
| 76717 | UNK, PEAR | ||||
| 110704 | CYLINDER ASSEMBLY, COUNTERBALANCE | ||||
| 110703 | CYLINDER ASSEMBLY, COUNTERBALANCE | ||||
| 112190-BSC | USE WITH 98.5″&84″ BAILS ATTACHING TO HOOKS | ||||
| 112190-120H | USE WITH 120″ BAILS ATTACHING TO HOOKS | ||||
| 112190-120B | USE WITH 120″ BAILS ATTACHING TO BLOCKS | ||||
| 112190-120 | USE WITH UP TO 120″ BAILS FOR BOTH HOOKS & BLOCKS | ||||
| 114032 | BRACKET ASSY, WIRELINE ADAPTER | ||||
| 51219-6 | FERRULE, CABLE | ||||
| 51220-4 | CABLE, Φ.188 X24″ LG, NYLON COATED | ||||
| 114259 | PIN, SAFETY | ||||
| 114246 | PIN, ADAPTE | ||||
| 53201 | FITTING, GREASE | ||||
| Z6001 | WIRE, LOCK | ||||
| 50908-C | WASHER, LOCK, 1/2″ | ||||
| 50908-R-C | WASHER, FLAT, 1/2″ | ||||
| 50908-6-C5D | SCREW, CAP, HEX HD, 1/2 X 3/4 | ||||
| 89536 | SEAL, GREASE | ||||
| 51404-28-S | PIN, COTTER | ||||
| 55528-C | NUT, SLOTTED, 1 3/4″ | ||||
| 89535 | BEARING ASSY | ||||
| 89763 | PIN, WIRELIN ADAPTER | ||||
| 114033 | GUARD, WIRE ROPE | ||||
| 114041 | SHEAVE, WIRE ROPE | ||||
| 114034 | BRRACKET, WIRE ROPE ADAPTER | ||||
| 114113 | PUMP/MOTOR ASSY (UL-DIV I) | ||||
| TABULATION CHART | |||||
| VARCO | PART | VOLTAGE, | |||
| DASH NO. | NO. | FREQUENCY & PHASE | |||
| BASIC | 109755 | 460, 60Hz, 30 | |||
| -1 | 109755-1 | 550, 60Hz, 30 | |||
| -2 | 109755-2 | 575, 60Hz, 30 | |||
| Z6000.8 | LOCKWIRE, .032# | ||||
| 50006-24-C8D | SCREW, CAP HEX-HEAD | ||||
| 50905-C | WASHER, LOCK REGULAR | ||||
| 50904-C | WASHER, LOCK REGULAR | ||||
| 55004-4-C50 | SCREW, CAP HEX-HEAD | ||||
| 50005-10-C50 | SCREW, CAP HEX-HEAD | ||||
| 50806-N-C | WASHER, RAT. 3/8″ | ||||
| 51300-152-B | O-RING | ||||
| 50906-C | WASHER, LOCK, 3/8″ | ||||
| 50006-12-C5D | SCREW. CAP. HEX. HD., 3/8-16 x 1.50 | ||||
| 53301-4-4 | DRIVE SCREWS | ||||
| 15230 | ROTATION ARROW | ||||
| Z6001 | LOCKWIRE, .051 DIA | ||||
| 51007-C | WASHER, LOCK, HEAVY. 7/16″ | ||||
| 51008-C | WASHER, LOCK, HEAVY, 1/2″ | ||||
| 50070-025F06 | SCREW, HEX. HD.f M10x1.5 x 25mm | ||||
| 50008-10-C50 | SCREW, HEX. HO.. 1/2-13 x 1.25 | ||||
| 110023 | FLEX COUPLING | ||||
| 112640 | ADAPTOR, PUMP/MOTOR | ||||
| 107783-5C11R | PUMP, HYD. VANE. 1.0 CU. IN/MIN | ||||
| 109542 | PUMP, HYO. PISTON. PRES. COMP. | ||||
| SEE CHART | AC-MOTOR, 10HP (EXPLOSION PROOF) | ||||
| 114174 | ASSY, MANIFOLD, UL | ||||
| 50103-16-B | SOCKET CAP SCREW 10-24 X 1 1/4 | ||||
| 56518-6-6-S | -6 FJIC / -6 MJIC, ELBOW | ||||
| 93018-18 | ORIFICE PLUG, 10-32 X .071 | ||||
| 56529-4-6-S | CONNECTOR | ||||
| 56544-8-S | CAP | ||||
| 128694-6-031 | FLOW CONTROL, -6 MORB/MJIC, 0.031 ORIRCE | ||||
| 56519-4-6-S | ELBOW | ||||
| 56519-6-4-S | ELBOW | ||||
| 56519-4-4-S | ELBOW | ||||
| 56529-8-8-S | CONNECTOR | ||||
| 56519-12-12-S | ELBOW | ||||
| 56519-10-8-S | ELBOW | ||||
| 56519-10-12-S | ELBOW | ||||
| 56529-8-6-S | CONNECTOR | ||||
| 56529-6-6-S | CONNECTOR | ||||
| 56529-10-8-S | CONNECTOR | ||||
| 56519-6-6-S | ELBOW | ||||
| 53200-242 | LOCTITE, BLULOCK | ||||
| 82226 | SEALANT, THREAD W/PTFE | ||||
| 110181 | NAMEPLATE, C’BALANCE MODE | ||||
| 53200-7471 | LOCTITE, ACTIVATOR | ||||
| 99838-1 | COVER, SUN CARTRIDGE, SERIES 1 | ||||
| 96079-A | COVER, PLATE, D03 | ||||
| 50103-16-B | SOCKET CAP SCREW 10-24 X 2.00 | ||||
| 56544-12-S | CAP, FEMALE 37°SEAT | ||||
| 56544-6-S | CAP, FEMALE 37° SEAT | ||||
| 56544-4-S | CAP, FEMALE 37° SEAT | ||||
| 53000-6-S | 3/8 NPT HEX SOCKET PLUG | ||||
| 53000-4-S | 1/4 NPT HEX SOCKET PLUG | ||||
| 53000-2-S | 1/8 NPT HEX SOCKET PLUG | ||||
| 53000-1-S | 1/16 NPT HEX SOCKET PLUG | ||||
| 87196-10-S | SAE J514-10 HEX SOCKET PLUG | ||||
| 87196-8-S | SAE J514-8 HEX SOCKET PLUG | ||||
| 87196-6-S | SAE J514-6 HEX SOCKET PLUG | ||||
| 87196-4-S | SAE J514-4 HEX SOCKET PLUG | ||||
| 87196-2-S | SAE J514-2 HEX SOCKET PLUG | ||||
| 110844-18 | ORIFICE PLUG, 1/4 NPT X .071 | ||||
| 93018-14 | ORIFICE PLUG, 10-32 X .055 | ||||
| 93018-08 | ORIFICE PLUG, 10-32 X .031 | ||||
| 93024-6SAE | TEST FITTING, SAE-6 | ||||
| 93024-4SAE | TEST FITTING, SAE-4 | ||||
| 111664-1EN | RELIEF VALVE, LOW FLOW | RBAC-LEN | |||
| 109858-1AN | REDUCING/RELIEVING VALVE | PRDB—LAN | |||
| 93667-M13 | CAVITY PLVG, T-13A SHORT | ||||
| 107031-1AN | RELIEF VALVE, VENTABLE | RVCA—LAN | |||
| 107029-175N | PILOT-TO-OPEN CHECK VALVE | CVCV-XEN | |||
| 107028-1ANB | DIFFERENTIAL UNLOADING VALVE | QCDB-LAN | |||
| 99353-1AN | REDUCING/RELIEVING VALVE | PVDA-LAN | |||
| 98402-800D | FLOW CONTROL VALVE | FCFA2810800D | |||
| 94537-130N | PILOT-TO-CLOSE CHECK VALVE | CODA—XCN | |||
| 94536-230N | CHECK VALVE | CXFA-XCN | |||
| 94536-14N | CHECK VALVE | CXDA-XAN | |||
| 94534-1CXN | LOGIC CARTRIDGE | LODC-XDN | |||
| 94520-1NN | RELIEF VALVE | RPEC-LNN | |||
| 93667-M11 | CAVITY PLUG, T-11A SHORT | XEOA-XXN | |||
| 30171921 | REWORK MANUAL VALVE, 3-POS. | 8453E6D2P | |||
| 127908-D2 | SOLENOID VALVE, 2-POS., 24 VDC | DHA/UL-0631/2/M 24DC/20 | |||
| 127908-J2 | SOLENOID VALVE, 3-POS., 24 VDC | DHA/UL—0713/M 24DC/20 | |||
| 109547-2 | MANIFOLD, TDS-9 (MACHINING) | ||||
| 114706 | ASSY, LOWER IBOP 6 5/* W/RELIEF GROOVE | ||||
| REFERENCE INFO. | 114706-500 | 114706-500 | 114706-501 | 114706-501 | 114706-502 |
| 15 KSI STD | 15KSI NAM | 15 KSI H2S | |||
| DESCRIPTION | BEST NO. | VARCO NO. | BEST NO. | VARCO NO. | BEST NO. |
| VALVE ASSY. | N/A | 114706-500 | N/A | 114706-501 | N/A |
| REPAIR Kn- COMPLETE | N/A | 99498-2 | N/A | 99498-2 | N/A |
| REPAIR KIT- SOFT SEALS | N/A | 99498-1 | N/A | 99498-1 | N/A |
| WRENCH- CRANK | 65021520 | 77408 | 65021520 | 77408 | 65021520 |
| PULLER- SEAT | 65021523 | 79489-14 | 65021523 | 79489-14 | 65021523 |
| WRENCH- NUT | 65060325 | 89141-18 | 65060325 | 89141-18 | 65060325 |
| 114791 | BODY, IBOP (GLAND POCKETS ONLY) | ||||
| 114792 | BODY, IBOP (NAM) | – | |||
| 77369-6 | THREAD PROTECTOR-PIN (NOT SHOWN) | – | |||
| 77369-5 | THREAD PROTECTOR-BOX (NOT SHOWN) | – | |||
| 89453-1 | RETAINING RING (H2S) | 65060192 | |||
| 89141-1 | RETAINING RING | 65060191 | |||
| 91137-12 | NYLON PLUG | 65060492 | |||
| 89453-17 | BACK-UP RING | 65060199 | |||
| 90441-10 | BACK-UP RING | 65060197 | |||
| 89453-16 | O-RING | 65060198 | |||
| 90441-9 | O-RING | 65060196 | |||
| 89453-13 | BACK-UP RING | 65021193 | |||
| 89141-13 | BACK-UP RING | 65021191 | |||
| 89453-3 | O-RING | 65021192 | |||
| 89141-3 | O-RING | 65021190 | |||
| 89453-9 | SPRING, WAVE | 65021491 | |||
| 89141-9 | SPRING, WAVE | 65021490 | |||
| 99501 | SET, SEAT/BALL (H2S) | – | |||
| 99497 | SET, SEAT/BALL | – | |||
| 89453-12 | BACK-UP RING | 65060794 | |||
| 89141-12 | BACK-UP RING | 65060792 | |||
| 89453-11 | O-RING | 65060793 | |||
| 89141-11 | O-RING | 65060791 | |||
| 90441-7 | SLEEVE, CRANK | 65060722 | |||
| 89453-8 | SEAL, CROWN A | 65060691 | |||
| 89141-8 | SEAL, CROWN A | 65060690 | |||
| 89453-7 | CRANK, OPER.-RH | 650606B1 | |||
| 89141-7 | CRANK, OPER.-RH | 650606B0 | |||
| 114705 | BODY, IBOP 5 1/4 SHOT | 一 | |||
| 116004 | KIT, GROUND ROD | ||||
| 116004-4 | CABLE LUG, COPPER W/HEX SCREW CLAMP 1/2″ BOLT TO 2/0 CABLE | ||||
| 116004-3 | WIRE, COPPER BARE OR INSUL 2/0-19 STRANDS | ||||
| 116004-2 | CLAMP, GROUND ROD Φ3/4″ TO 2/0 CABLE | ||||
| 116004-1 | ROD, STEEL, COPPER PLATED Φ3/4 | ||||
| 117603 | Pump Assembly Gearbox Lubrication | ||||
| Z6001 | LOCKWfRE (Φ.051) | ||||
| 53418 | PLUG, PLASTIC PIPE CLOSURE | ||||
| 53408 | PLUG, PLASTIC PIPE CLOSURE | ||||
| 50906-C | WASHER, LOCK-REGULAR | ||||
| 50010-40-C5D | SCREW, CAP-HEX HEAD | ||||
| 50006-10-C5D | SCREW, CAP-HEX HEAD | ||||
| 71033 | GASKET | ||||
| 53000-16-C | PLUG, EXT PiPE-C’SUNK HEX | ||||
| 56529-10-8-S | CONNECTOR, 0-RING BOSS /37* | ||||
| 56519-16-16-S | ELBOW, O-RING BOSS /37* | ||||
| 109579 | ADAPTER, MOTOR/PUMP | ||||
| 108119-16B | SIGHT GAGE | ||||
| 108465-24 | PLUG, SHIPPING SAE 0-RING PORT | ||||
| 50910-C | WASHER, LOCK-REGUIAR | ||||
| 109567-T | P50 PUMP (THRUST PLATE) | ||||
| 109567-S | P50 PUMP (BODY SEAL) | ||||
| 109567-E | P50 PUMP (END COVER) | ||||
| 109567-B | P50 PUMP (ROLLER BEARING) | ||||
| 109567-G20 | P50 PUMP (GEAR SET) | ||||
| 109567-H203 | P50 PUMP (GEAR HOUSING) | ||||
| 110161-49S | MOTOR, HYDRAULIC, LOW-SPEED/HIGH-TORQUE | ||||
| 117575-1 | AdAPTER PLATE, LUBE PUMP ALUM.ALLOY | ||||
| 117575 | AdAPTER PLATE, LUBE PUMP STEEL | ||||
| 117820 | SERVICE LOOP KIT TDS-9S(4X646) | ||||
| 56519-12-125 | ELBOW, O-RING BOSS/37° | ||||
| 114196-1 | WIRE ROPE ASSY | ||||
| 56416-28-C | CLEVIS PIN | ||||
| 120161 (TBD) | HOSE ASSY, HYDRAULIC CYL.-CRANK ASSY | ||||
| 125094 | TUBE ASSY, LINK ADAPTER/MANIFOLD | ||||
| 125097 | TUBE ASSY, LINK ADAPTER/MANIFOLD | ||||
| 120157(TBD) | HOSE ASSY, HYDRAULIC CYL.-CRANK ASSY | ||||
| 51435-20-S | PIN, COTTER | ||||
| 50906-C | WASHER, LOCK, REG | ||||
| 50006-08-C5D | SCREW, CAP, HEX HD. | ||||
| 123685 | BRACKET-MOUNTING, LINK TILT MANIFOLD | ||||
| 118463-2 | MANIFOLD, LINK TILT CYLINDER | ||||
| 51012-C | WASHER, LOCK-HEAVY | ||||
| 50412-C | NUT, HEX-HEAVY | ||||
| 125098 | TUBE ASSY, LINK ADAPTER/MANIFOLD | ||||
| 50816-R-C5 | WASHER, FLAT-REGULAR | ||||
| 51008-C | WASHER, LOCK-HEAVY | ||||
| 56416-32-C | CLEVIS PIN | ||||
| 119123 | LINK | ||||
| 50008-11-C5D | SCREW, CAP-HEX HEAD | ||||
| 118947 | BAR, RETAINING | ||||
| 51108-C | WASHER, HI-COLLAR | ||||
| 16532 | KEY | ||||
| 50008-14-C5D | SCREW, CAP, HEX HD, 1/2-13 X 1 3/4 | ||||
| 107052 | LOCK TAB | ||||
| 98898 | CRANK ASSEMBLY, IBOP | ||||
| 50912-C | WASHER, LOCK | ||||
| 50012-16-C5D | CAP SCREW, HEX HD DRILLED | ||||
| 110042 | SHELL, ACUTATOR, IBOP | ||||
| Z6001 | SAFETY WIRE (Φ.051) | ||||
| 114212 | CLIP, WIRE ROPE, 5/16” | ||||
| 118951 | HOSE ASSY, IBOP CYL, CLOSE | ||||
| 118950 | HOSE ASSY, IBOP CYL, OPEN | ||||
| 119387 | PIN, PIPE HANDLER | ||||
| 119592 | CYLINDER, HYDRAULIC ASSEMBLY | ||||
| 118949 | HOSE ASSY, CLAMP, ROD | ||||
| 118948 | HOSE ASSY, CLAMP, PISTON | ||||
| 119455 | PIN, CRANK | ||||
| 119545 | CRANK ASSEMBLY, LINK TILT | ||||
| 117821 | TORQUE WRENCH ASSEMBLY | ||||
| 120162(TBD) | U-BOLT, 250 TON | ||||
| 119139 | U-BOLT, 350 TON | ||||
| 122367 | U-BOLT, 500 TON | ||||
| 120164(TBD) | CLAMP, LINK TILT, 250 TON | ||||
| 119122 | CLAMP, LINK TILT, 350 TON | ||||
| 120165 | CLAMP, LINK TILT, 500 TON | ||||
| 50108-12-C | CAP SCREW, SOCKET HD | ||||
| 50108-20-C | CAP SCREW, SOCKET HD | ||||
| 50108-18-C | CAP SCREW, SOCKET HD | ||||
| 50108-16-C | CAP SCREW, SOCKET HD | ||||
| 118958 | JAW ASSY. 3.00-4.00 OD TOOL JOINT | ||||
| 85786-2 | JAW ASSY. 5.25-6.63 OD TOOL JOINT | ||||
| 80492 | JAW ASSY. 4.00-5.00 OD TOOL JOINT | ||||
| 122109 | JAW ASSY. 6.38-7.5 OD TOOL JOINT | ||||
| 118957 | GUIDE, STABBING, NC26 TOOL JOINT | ||||
| 118249 | GUIDE, STABBING. 5.25-6.63 OD TOOL JOINT | ||||
| 118250 | GUIDE, STABBING. 4.00-5.00 OD TOOL JOINT | ||||
| 123114 | GUIDE, STABBING. 6.38-7.5 OD TOOL JOINT | ||||
| 118956-1 | SAVER SUB, NC26 SHORT | ||||
| 118956 | SAVER SUB, NC26 LONG | ||||
| 118955-1 | SAVER SUB, NC31 SHORT | ||||
| 118955 | SAVER SUB, NC31 LONG | ||||
| 118954-1 | SAVER SUB, NC38 SHORT | ||||
| 118954 | SAVER SUB, NC38 LONG | ||||
| 118953-1 | SAVER SUB, HT40 SHORT | ||||
| 118953 | SAVER SUB, HT40 LONG | ||||
| 118952-1 | SAVER SUB, NC40 SHORT | ||||
| 118952 | SAVER SUB, NC40 LONG | ||||
| 78556-1 | SAVER SUB, NC46 SHORT | ||||
| 117812 | SAVER SUB, NC46 LONG | ||||
| 129089 | SAVER SUB, NT55-375 SHORT | ||||
| 76666-2 | SAVER SUB, NC50 SHORT | ||||
| 117811 | SAVER SUB, NC50 LONG | ||||
| 112848 | TOOL JOINT LOCK | ||||
| 114706-502 | IBOP, LOWER, H2S | ||||
| 110103-502 | IBOP, UPPER, H2S | ||||
| 114706-500 | IBOP, LOWER | ||||
| 110103-500 | IBOP, UPPER | ||||
| 50904-C | WASHER, LOCK-REGULAR | ||||
| 50004-B-C5D | SCREW, CAP | ||||
| 119731 | RETAINER | ||||
| 119546 | PIN | ||||
| 117821 | TORQUE WRENCH ASSEMBLY | ||||
| Z6001 | LOCKWIRE Φ.051 | ||||
| DELETED! | |||||
| DELETED! | |||||
| 55214-C | NUT, HEX-STANDARD | ||||
| 50914-C | WASHER, LOCK-REGULAR | ||||
| 51016—C | WASHER, LOCK-HEAVY | ||||
| 50905-C | WASHER, LOCK-REGULAR | ||||
| 50016-18-C5D | SCREW, CAP-HEX HEAD | ||||
| 50005-20-C5D | SCREW, CAP-HEX HEAD | ||||
| DELETED! | |||||
| 50812-R-C | FLAT WASHER | ||||
| DELETED! | |||||
| 119597-1 | SLEEVE, SPRING | ||||
| 118844-16-16 | BEARING,FIBERGLIDE JOURNAL | ||||
| 118844-22-30 | BEARING,FIBERGLIDE JOURNAL | ||||
| 118844-12-16 | BEARING,FIBERGLIDE JOURNAL | ||||
| 50822-R—C | FLATWASHER | ||||
| 51403-16 | PIN, COTTER | ||||
| 118336 | PIN, PIVOT | ||||
| 118531 | PIN, PIVOT | ||||
| 110074 | PIN, PIVOT | ||||
| 50832-N-C | SPACER, SPRING | ||||
| 71847 | ROLLER | ||||
| 117869-500 | END CAP, PIPE HANDLER | ||||
| 110083 | SPRING | ||||
| 118510 | CYLINDER ASSEMBLY, IBOP ACTUATOR | ||||
| 118511 | MANIFOLD ASSEMBLY, CLAMP CYLINDER | ||||
| 117853 | YOKE, IBOP ACTUATOR | ||||
| 117941 | CYLINDER ASSEMBLY, CLAMP | ||||
| 117822 | PIPE HANDLER, TORQUE ARRESTOR | ||||
| 117941 | CYLINDER ASSEMBLY, CLAMP | ||||
| 79179 | SPRING, DIE | ||||
| 50008-12-5C | SCREW, HEX HD, 1/2-13 UNC-2A X 1.50 LG | ||||
| 118367 | STABILIZER ASSY, REAR | ||||
| 50008-10-5C | SCREW, HEX HD, 1/2-13 UNC-2A X 1.25 LG | ||||
| 123313 | RETAINER, HINGE PIN | ||||
| 51403-14-C | PIN, COTTER | ||||
| 50816-N-5C | WASHER | ||||
| 50516C | NUT, HEX-SLOTTED | ||||
| 117989 | SCREW, HEX HD, DRILLED SHANK | ||||
| 118368 | STABILIZER ASSY, FRONT | ||||
| 53201 | FITTING, GREASE | ||||
| Z6001 | LOCKWIRE, .051 DIA. | ||||
| 107303-1-8 | FLANGE PROTECTOR, SAE J518 | ||||
| 50908-C | LOCKWASHER, 1/2 | ||||
| 50008-8-C5D | SCREW, HEX HD, 1/2-13UNC X 1 LG | ||||
| 110152 | BUSHING, WEAR, SST | ||||
| 72221 | RING, WIPER | ||||
| 72220 | SEAL, ROD | ||||
| 72219 | SEAL, PISTON | ||||
| 11085 | RING, CYLINDER HEAD | ||||
| 117991 | PIN, HINGE | ||||
| 11075 | CYLINDER HEAD | ||||
| 12820 | PISTON | ||||
| 118021 | GATE | ||||
| 118019 | BODY, CLAMP CYLINDER | ||||
| 117977 | TIEBACK KITS | ||||
| CONFIGURATION TABLE | WEIGHT | ||||
| BSC | STD CONFIGURATION (-100 & -101) | 3450 lb. | |||
| 117977-100 | UNIVERSAL TIEBACK KIT (LOWER TIEBACK KIT) | 650 lb. | |||
| 117977-101 | SPREADER BEAM KIT | 2800 lb. | |||
| 117977-102 | A-LEG SUPPORT KIT | 1000 lb. | |||
| 117977-103 | WIDE SPREADER KIT | 2925 lb. | |||
| 117977-104 | 32 FT. AUXILIARY SPREADER KIT | 1500 lb. | |||
| -23 | BEAM, W8X18 X 384.0 LG (32 FT) | MS00017 | |||
| 119973-2 | STRAP | ||||
| 117982-100 | PLATE, TIEBACK | ||||
| Z6001 | LOCKWIRE, .056 DIA. | ||||
| 50016-64-C5D | BOLT, 1.00-UNC X 8.0 LONG | ||||
| 119973 | STRAP | ||||
| 117977-101 | MAIN SPREADER BEAM ASSEMBLY | ||||
| 117977-100 | TIEBACK ASSEMBLY | ||||
| 117977-DWG | DRAWING, TIEBACK KIT | ||||
| 112893-1 | ROD, THREADED 1-8 X 36” LG | ||||
| 50816-R-C-5 | WASHER, FLAT-1” | ||||
| 117977-12 | PLATE, 1.00 THK | MS00017 | |||
| 50916-C | WASHER, LOCK-1” | ||||
| 50416-C | NUT, 1-8 UNO | ||||
| 117977-9 | BEAM, W12X72 X 384.0 LG | MS00017 | |||
| 117731 | FLANGE CLAMP | ||||
| 117982 | PLATE, TIEBACK | ||||
| 117701 | STRAP | ||||
| 117700-3 | STRAP | ||||
| 117700-2 | STRAP | ||||
| 117700-1 | STRAP | ||||
| 117977-2 | BEAM, W8X18 X 180.0 LG | MS00017 | |||
| 117976 | TIEBACK LINK | ||||
| 118173 | SHOT PIN ASSEMBLY | ||||
| 118157-1 | CAP, SHOT PIN | ||||
| 93024-4SAE | FITTING, TEST | ||||
| 56519-6-6-S | ELBOW, O-RING BOSS/37° | ||||
| 53000-1-S | PLUG, EXTERNAL PIPE C’SUNK HEX | ||||
| 51212-14 | PIN, DOWEL | ||||
| 50008-14-C5D | SCREW, CAP, HEX HEAD | ||||
| 56544-6-S | CAP, FEMALE 37° SEAT | ||||
| 94520-1AN | VALVE, RELIEF | ||||
| 56529-6-6-S | CONNECTOR, 0-RING BOSS /37° | ||||
| 110078-FL2 | CABLE, SAFETY (FERRULE) | ||||
| 110078-L18 | CABLE, SAFETY | ||||
| 51300-226-B | 0-RING | ||||
| 50904-C | WASHER, LOCK, REGULAR | ||||
| 50905-C | WACHER, LOCK, REGULAR | ||||
| 50005-20-C5D | SCREW, CAP, HEX HEAD | ||||
| Z6001 | LOCKWIRE .050 DIA | ||||
| 50004-06-C5D | SCREW, CAP, HEX HEAD | ||||
| 110163-2 | MANIFOLD, DIRECT MOTOR MOUNT, DUAL PORT | ||||
| 114375-1 | HYDRAULIC MOTOR | ||||
| 51402-10-S | PIN, COTTER | ||||
| 112626 | BEARING, SHOT PIN | ||||
| 118563 | SLEEVE, SHOT PIN | ||||
| 50908-C | WASHER, LOCK, REGULAR | ||||
| 50008-10-C5D | SCREW, CAP, HEX HEAD | ||||
| 110061 | ROD SEAL ASSEMBLY | ||||
| 112627 | COVER, SHOT PIN | ||||
| 110056 | ROD SEAL ASSEMBLY | ||||
| 117831 | SHOT PIN | ||||
| 118155 | BASE, SHOT PIN | ||||
| 118157 | CAP, SHOT PIN | ||||
| 117830 | GEAR, PINON | ||||
| 94522-1EN | VALVE, RELIEF | ||||
| 118217 | MOTOR ASSY, DRILL, AC (HELICAL) | ||||
| 50006-8-C5D | SCREW, CAP-HEX HD DRILLED | ||||
| 53300-526 | TIE, CABLE (TY-RAP) (NOT SHOWN) | ||||
| 50908-C | WASHER, LOCK-REGUU\R (1 NOT SHOWN) | ||||
| 50008-8-C5D | SCREW, CAP-HEX HD DRILLED (NOT SHOWN) | ||||
| 78736-14 | CLAMP, SUPPORT, 2.25 ID (NOT SHOWN) | ||||
| 53301-04-03-C | SCREW, DRIVE | ||||
| 30173795-1 | INSTRUCTIONS, HAZARDOUS AREA SAFETY | ||||
| 30173795-B5C | NAMEPLATE, CERIFICATION | ||||
| 53002-02-C | PLUG, PIPE-SQ HD | ||||
| 115040 | PINION INSTALLATION SUPPLIES | ||||
| 30113619 | SCREEN, LOUVER | ||||
| 110078-L18 | CABLE, SAFETY (0.032) (NOT SHOWN) | ||||
| 110078-FL2 | CABLE, SAFETY (FERRULE) (NOT SHOWN) | ||||
| 120995 | COVER, LOUVER, DRILL MOTOR | ||||
| 120994 | LOUVER, DRILL MOTOR | ||||
| 50005-6-C5D | SCREW, CAP-HEX HD | ||||
| 50905-C | WASHER, LOCK- REGULAR | ||||
| 109554 | HUB, BRAKE | ||||
| 117939 | PINION GEAR, HELICAL (MACHINING) | ||||
| 51208-14 | PIN, DOWEL | ||||
| DASH NO. | VARCO PART NO. | VENDOR PART NO. | HP | FLC @ 447 VAC | FLC © 550 VAC |
| 118217-35L46 | 30174875-35L46 | 350 | 407 | 331 | |
| 118217-35R46 | 30174875-35R46 | 350 | 407 | 331 | |
| 118217-35L60 | 30174875-35L60 | P40L6565 | 350 | 407 | 331 |
| 118217-35R60 | 30174875-35R60 | P40L7565 | 350 | 407 | 331 |
| 118217-40L60 | 30174875-40L60 | P40L7585 | 400 | N/A | N/A |
| 118217-40R60 | 30174875-40R60 | P40L6585 | 400 | N/A | N/A |
| 118217-40L60Z | 30174875-40L60 | P40L7585 | 400 | N/A | N/A |
| 118217-40R60Z | 30174875-40R60 | P40L6585 | 400 | N/A | N/A |
| 118244 | KIT, TRAVELLING EQUIPMENT ATTACHMENT | ||||
| 95030-DWG | DRAWING, COUNTERBALANCE PACKAGE (BECKET) | ||||
| 88484 | SHACKEL (13.5 TON) | ||||
| 80392 | LINK CONNECTING | ||||
| 80390 | CHAIN 9 LINK | ||||
| 112190-DWG | ORAWiNG, COUNTERBALANCE PACKAGE | ||||
| 117076 | BEAM, COUNTERBALANCE | ||||
| 76717 | PEAR LINK | ||||
| 51405-18-S | PIN, COTTER | ||||
| 118249 | GUIDE, STABBING. 5.25-6.63 OD TOOL JOINT | ||||
| Z6001 | LOCKWIRE Φ.051 DIA | ||||
| 51402-8-S | PIN, COTTER | ||||
| 50908-C | WASHER, LOCK | ||||
| 50810-N-C-5 | WAHSER, FLAT NARROW | ||||
| 50008-13-C5D | SCREW, CAP-HEX HEAD | ||||
| 76445 | RETAINER | ||||
| 76443 | SPRING | ||||
| 76442-1 | GUIDE, ARM | ||||
| 76398 | PIN | ||||
| 118066 | STABBING GUIDE, CLAMP CYLIDER, 5.25″-6.63″ MACHINING | ||||
| 118064 | STABBING GUIDE, GATE, 5.25″-6.63″ MACHINING | ||||
| 118463 | MANIFOLD LINK TILT CYLINDER | ||||
| 99838-1 | COVER, SUN CARTRIDGE, SERIES 1 | ||||
| 87196-8-S | PLUG, O-RING, -8 | ||||
| 112809-04 | CAP, SHIPPING, THREADED, -4 | ||||
| 53200-545 | LOCTITE, HYDRAULIC | ||||
| 112809-08 | CAP, SHIPPING, THREADED, -8 | ||||
| 56519-8-8-S | ELBOW, O-RING BOSS/37°, -8 | ||||
| 56529-8-8-S | CONNECTOR, O-RING BOSS/37°, 1/2” | ||||
| 87196-2-S | PLUG, O-RING, -2 | ||||
| 93018-08 | ORIFICE. #10—32UNF X Φ.031 | ||||
| 94042-36 | ORIFICE, 1/8NPT X Φ.142 | ||||
| 9302-4SAE | TEST FITTING, SAE-4 | ||||
| 56519-4-4-S | ELBOW, O-RING BOSS/37°, -4 | ||||
| 94518-13HN | VALVE, COUNTERBALANCE (CBCA-LHN) | ||||
| 93547-1B30N | CHECK VALVE, PILOT TO OPEN (CKCB-XCN) | ||||
| SEE TABLE | MANIFOLD, LINK TILT CYLINDER | ||||
| CONFIGURATION NO | PART NO. | ||||
| 118463-BSC | 118172-BSC | ||||
| 118463-1 | 118172-1 | ||||
| 118463-2 | 118172-2 | ||||
| 118510 | CYLINDER ASSEMBLY, IBOP ACTUATOR | ||||
| 119013 | TUBE ASSEMBLY, 3/8 O.D. | ||||
| 53406 | CAP, PLASTIC PIPE CLOSURE | ||||
| 103141-10 | CLEVIS, ROD | ||||
| 56519-6-6-S | ELBOW, O-RING BOSS/37° 3/8 | ||||
| 87196-2-S | PLUG, HEX SOCKET, SAE -2 | ||||
| 93024-6SAE | TEST FITTING | ||||
| 94534-1CXN | LOGIC CARTRIDGE (LODC-XCN) | ||||
| 93548-1S30N | CARTRIDGE, CHECK VALVE (CXCD-XCN) | ||||
| 56529-6-6-S | CONNECTOR, O-RING BOSS/37° | ||||
| 120008 | CYLINDER, HYDRAULIC, IBOP ACTUATOR | ||||
| 118511 | MANIFOLD ASSEMBLY, CLAMP CYLINDER | ||||
| 51300-210-B | O RING,SIZE 210 | ||||
| 107303-1-8 | FLANGE PROTECTOR, SAE J518 | ||||
| 53408 | PLUG, PLASTIC PIPE CLOSURE | ||||
| 87196-8-S | PLUG, SAE-8, HEX SOCKET | ||||
| 871 96-6-S | PLUG, SAE-6, HEX SOCKET | ||||
| 87196-2-S | PLUG, SAE-2, HEX SOCKET | ||||
| 56557-8-8-S | ELBOW, 45°O-RING BOSS/37° | ||||
| 109302-130NC | CARTRIDGE, FLOW CONTROL (CNCC-XCN-.047) | ||||
| 94537-130N | CARTRIDGE, CHECK (PILOT TO CLOSE) (CODA-XCN) | ||||
| 93024-4SAE | FITTING, TEST – SAE-4 | ||||
| 112489-2 | MANIFOLD, CLAMP CYLINDER | ||||
| 119054 | Pipe Handler Kit, PH-50 | ||||
| 129090-375 | CROSSOVER SUB, HT55-375 | ||||
| 129089-375 | SAVER SUB, HT55-375 (SHORT) | ||||
| 129090 | CROSSOVER SUB, HT55-400 | ||||
| 129089 | SAVER SUB, HT55-400 (SHORT) | ||||
| (TBD) | CROSSOVER SUB, NC26 | ||||
| 118956-1 | SAVER SUB, NC26 (SHORT) | ||||
| 118956 | SAVER SUB, NC26 (LONG) | ||||
| (TBD) | CROSSOVER SUB, NC31 | ||||
| 118955-1 | SAVER SUB, NC31 (SHORT) | ||||
| 118955 | SAVER SUB, NC31 (LONG) | ||||
| 110852 | CROSSOVER SUB, NC38 | ||||
| 118954-1 | SAVER SUB, NC38 (SHORT) | ||||
| 118954 | SAVER SUB, NC38 (LONG) | ||||
| 114542-600 | CROSSOVER SUB, HT40 | ||||
| 118953-1 | SAVER SUB, HT40 (SHORT) | ||||
| 118953 | SAVER SUB, HT40 (LONG) | ||||
| 120822 | CROSSOVER SUB, NC40 | ||||
| 118952-1 | SAVER SUB, NC40 (SHORT) | ||||
| 118952 | SAVER SUB, NC40 (LONG) | ||||
| 115595 | CROSSOVER SUB, 6 5/8 REG – NC46 | ||||
| 78656-1 | SAVER SUB, NC46 (SHORT) | ||||
| 117812 | SAVER SUB, NC46 (LONG) | ||||
| 79410-3 | CROSSOVER SUB, 6 5/8 REG – NC50 | ||||
| 76666-2 | SAVER SUB, NC50 (SHORT) | ||||
| 117811 | SAVER SUB, NC50 (LONG) | ||||
| 80098 | SPACER SUB | ||||
| 89141-18 | SEAT WRENCH | ||||
| 79489-14 | SEAT PULLER | ||||
| 77408 | WRENCH, .875 HEX | ||||
| 119545 | CRANK ASSEMBLY | ||||
| 118844-16-24 | BUSHING, FIBERGLIDE | ||||
| 119133 | CRANK (MACHINING) | ||||
| 119592 | CYLINDER, HYDRAULIC ASSEMBLY | ||||
| 53200-277 | LOCKING COMPOUND | ||||
| 119732 | CLEVIS | ||||
| 119416 | CYLINDER, HYDRAULIC | ||||
| 120037 | S-PIPE PACKAGE TDS-9S | ||||
| 84617-501 | ELBOW，S-PIPE, 4” FIG 1002, FEMALE | ||||
| 81153 | ELBOW, S-PIPE, 4” APL LPT END, FEMALE | ||||
| 81158 | WING NUT, 4” FIG 1002 | ||||
| 114833 | SEAL RING，4” FIG 1002 | ||||
| 50908-C | WASHER, LOCK-REGULAR | ||||
| 50008-16-C5D | SCREW, HEX HEAD HEX | ||||
| 50012-13-C5D | SCREW， HEX HEAD CAP | ||||
| 78002 | CLAMP, SERVICE LOOP 巳RACKET | ||||
| 107714 | MOUNT-COMPOSITE CABLE | ||||
| 50012-30-C5D | SCREW， HEX HEAD CAP | ||||
| 50012-16-C5D | SCREW, HEX HEAD CAP | ||||
| 50912-C | WASHER, LOCK-REGULAR | ||||
| Z6001 | LOCKWIRE 0.051 | ||||
| 50910-C | WASHER, LOCK -REGULAR | ||||
| 50010-18-C5D | SCREW， HEX HEAD CAP | ||||
| 91924 | WING NUT, 3″ FIG 1002 | ||||
| 91923 | SEAL RING, 3” FIG 1002 | ||||
| 91921 | PLUG, BUND, 3” FIG 1002 | ||||
| 56541-32 | KIT, FLANGE | ||||
| 50908-C | WASHER，LOCK-REGULAR | ||||
| 92426 | RUBBER, S-PIPE | ||||
| 114840 | MOUNT, S-PIPE, LH (OUTSIDE GUARD) | ||||
| 117061 | MOUNT, S-PIPE, RH (OUTSIDE GUARD) | ||||
| 117679 | MALE SUB，4” FIG 1002, 4” API LPT END | ||||
| 108870-1 | MOUNT, S-PIPE – BASE | ||||
| 108870-2 | MOUNT, S-PIPE – TOP | ||||
| 116411 | BRACKET, SERVICE LOOP/S-PIPE | ||||
| 116376 | WELDMENT, S-PIPE (HERCULES) | ||||
| 114855 | WELDMENT, S-PIPE, LH (OUTSIDE GUARD) | ||||
| 117063 | WELDMENT, S-PIPE, RH (OUTSIDE GUARD) | ||||
| 50008-30-C5D | SCREW, HEX HEAD CAP | ||||
| 108754 | WELDMENT, S-PIPE, RH (INSIDE GUARD) | ||||
| 120546 | DRILLER’S CONSOLE ASSEMBLY | ||||
| 55203-S | NUT, HEX, 10-32 | STAINLESS STEEL | |||
| 88650 | GREASE, LITHIUM BASED | ||||
| 53200-454 | COMPOUND, LOCKING (CLEAR) | ||||
| 53200-242 | COMPOUND, LOCKING (BLUE) | ||||
| 78910-BSC | RTV, 108, CLEAR | ||||
| 53227 | TEFLON TAPE | ||||
| 80430 | TUBING, 1/4 | POLYETHYLENE | |||
| 52002-12-B | NIPPLE, PIPE, 1/8 NPT X 1.5 LNG | ||||
| 88491 | ELBOW, MALE, 1/4 X 1/8 | ||||
| 88493 | ELBOW, FEMALE, 1/4 X 1/8 | ||||
| 81778 | SWITCH, DIFFERENTIAL PRESSURE | ||||
| 110869 | RIVET, SEALING, CLOSED END | STAINLESS STEEL | |||
| 96206-3 | LABEL, NFPA 496 Z PURGE | STAINLESS STEEL | |||
| 50202-B | NUT, HEX, 8-32 | BRASS | |||
| 50204-B | NUT, HEX, 1/4-20 | BRASS | |||
| 50604-6-S | SCREW, MACHINE, FLAT HD, 1/4-20 | STAINLESS STEEL | |||
| 50902-S | WASHER, LOCK, NO. 8 | STAINLESS STEEL | |||
| 50802-R-S | WASHER, FLAT, NO. 8 | STAINLESS STEEL | |||
| 50202-S | NUT, HEX, 8-32 | STAINLESS STEEL | |||
| 50903-S | WASHER, LOCK, NO. 10 | STAINLESS STEEL | |||
| 50803-R-S | WASHER, FLAT, NO. 10 | STAINLESS STEEL | |||
| 50649-61 | SCREW, MACHINE, PAN HD, 10-3 | STAINLESS STEEL | |||
| 50649-68 | SCREW, MACHINE, PAN HD, 10-3 | STAINLESS STEEL | |||
| 85145-6-021 | MARKERS, HORIZONTAL (#21-30) | ||||
| 85145-6-011 | MARKERS, HORIZONTAL (#11-20) | ||||
| 85145-6-001 | MARKERS, HORIZONTAL (#1-10) | ||||
| 90153 | END CLAMP | ||||
| 85039 | ENDPLATE, TERMINAL | ||||
| 85038-UL-2.5 | TERMINAL BLOCK | ||||
| 125041 | H-RAIL, 33 INCH | ||||
| 78317-25 | LOCKNUT, 25 MM | ||||
| 86872 -25-S | LOCKWASHER, INT STAR, 25 MM | ||||
| 86871-25 | WASHER, SEALING, 25 MM | ||||
| 83444-05 | GLAND, ARMORED CABLE | ||||
| 122443-9-H | CABLE PIGTAIL, 9 FT, 5 TSP | ||||
| 78725-05 | FERRULE, 12 AWG. | ||||
| 78725-03 | FERRULE, 18 AWG | ||||
| 78725-02 | FERRULE, 20 AWG | ||||
| 56610-01 | TERMINAL, WIRE-SPADE | ||||
| 87975 | CABLE, TWISTED PAIR | ||||
| 56621-18-8 | WIRE, STRANDED, HOOK-UP | ||||
| 87708-44 | INDICATING LAMP, 2 WATT | ||||
| 87708-38 | INDICATING LIGHT, RED | ||||
| 87708-40 | INDICATING LIGHT, AMBER | ||||
| 87708-02 | SWITCH, PUSHBUTTON | ||||
| 87708-30 | SWITCH, SEL.-3 POS, SPRING RTN TO CENTER | ||||
| 87708-33 | SWITCH, SEL.-3 POS, SPRING RTN FROM RIGHT | ||||
| 87708-67 | PUSHBUTTON, E-STOP, MUSHROOM | ||||
| 87708-46 | POTENTIOMETER OPERATOR | ||||
| 81736-2 | POTENTIOMETER, 10K | ||||
| 116551 | RHEOSTAT ASSY, THROTTLE | ||||
| 96218-3 | METER, RPM, 0-10VDC (0-250 RPM) | ||||
| 96290 | REG. MODULE, +24VDC/+5VDC | ||||
| 122627-34 | BUS CONNECTOR (PROFIBUS) | ||||
| 122627-57 | REMOTE I/O BASE, ANALOG | ||||
| 122627-58 | REMOTE I/O BASE, DIGITAL | ||||
| 122627-47 | REMOTE 4 ANALOG OUTPUT | ||||
| 122627-45 | REMOTE 4 ANALOG INPUT | ||||
| 122627-46 | REMOTE 24 DI/8D0, 24VDC | ||||
| 121010-1 | GASKET, ENCLOSER | ||||
| 121732 | WELDMENT, ENCLOSURE | ||||
| 88050-200228 | GROMMET, 5/8 I.D. | ||||
| 88663 | J-BOX, HORN | ||||
| 87124 | HORN, 24 VDC | ||||
| 87708-26 | SWITCH, SEL.-2 POS, MAINTAINED | ||||
| 87708-36 | SWITCH, SEL.-3 POS, MAINTAINED | ||||
| 121239-4 | NAMEPLATE, VDC, WITH ELEVATOR AND STANDJUMP | ||||
| 121239-3 | NAMEPLATE, VDC, WITH STANDJUMP | ||||
| 121239-2 | NAMEPLATE, VDC, VERTICALLY MOUNTED | ||||
| 121239-BSC | NAMEPLATE, VDC, STANDARD | ||||
| 96219-11 | METER, TORQUE, TDS-9S/-11S (0-60K FT LB) | ||||
| 96219-10 | METER, TORQUE, TDS-10S (0-40K FT LB) | ||||
| 120900 | MOTOR/HOUSING ASSY, TDS-11S W/LOAD COLLAR | ||||
| 118377 | COLLAR, LANDING (SET) | ||||
| 118378 | RETAINER, LANDING COLLAR | ||||
| 110039 | PIN, DOWEL | ||||
| 109539 | SPACER, RING | ||||
| 118959 | SHIELD, BEARING (RP) | ||||
| 98290 | LINER, UPPER STEM | ||||
| 98291 | SEAL, POLYPAK | ||||
| 91250-1 | SEAL, OIL (RP) | ||||
| 77039 | SEAL (RP) | ||||
| 79153 | SEAL, HAMMER LUG UNION (RP) | ||||
| 96648-1 | RING, RETAINING | ||||
| 109538 | RING, RETAINING | ||||
| 117116 | TUBE ASSEMBLY, BRAKE | ||||
| 110172 | TUBE ASSEMBLY, BRAKE | ||||
| 110171 | TUBE ASSEMBLY, BRAKE | ||||
| 111827-2 | TUBE, HEAT EXCHANGER – 1/2” | ||||
| 111827-1 | TUBE, HEAT EXCHANGER – 1/2” | ||||
| 53002-12-S | PLUG, PIPE SQUARE HEAD | ||||
| 53304-152 | CLAMP, HOSE | ||||
| 110078-L18 | CABLE, SAFETY – Φ.032 x 18” | ||||
| 110078-L24 | CABLE, SAFETY – Φ.032 x 24” | ||||
| 110078-L36 | CABLE, SAFETY – Φ.032 x 36” | ||||
| 110078-FL2 | FERRULE, SAFETY CABLE 0.032 | ||||
| 118456 | BEARING ISOLATOR | ||||
| 6581 | FITTING, BREATHER | ||||
| 53902-B | NIPPLE, CLOSE | ||||
| 52102-B | COUPLING, STANDARD PIPE-COMMON | ||||
| 56531-2 | PLUG, O-RING BOSS(WITH O-RING) | ||||
| 110147-4 | SHIM, RESERVOIR MOUNTING (.031) | ||||
| 110147-3 | SHIM, RESERVOIR MOUNTING (.010) | ||||
| 110147-2 | SHIM, RESERVOIR MOUNTING (.005) | ||||
| 110147-1 | SHIM, RESERVOIR MOUNTING (.002) | ||||
| 109586-5 | SHIM, BEARING RETAINER | ||||
| 109586-4 | SHIM, BEARING RETAINER | ||||
| 109586-3 | SHIM, BEARING RETAINER | ||||
| 109586-2 | SHIM, BEARING RETAINER | ||||
| 109586-1 | SHIM, BEARING RETAINER | ||||
| 119977 | LABEL, WARNING | ||||
| 109523 | ADAPTER, S-PIPE | ||||
| 109566 | TUBE, UPPER BEARING LUBE | ||||
| 88990-10 | NOZZLE, SPRAY – FLAT PATTERN | ||||
| 88990-9 | NOZZLE, SPRAY – FLAT PATTERN | ||||
| 108216-12 | BALL VALVE | ||||
| 110116 | GASKET, DUCT/MOTOR | ||||
| 110110 | GASKET, DUCT/BLOWER | ||||
| 110017 | GASKET, BLOWER | ||||
| 110016 | GASKET, BLOWER | ||||
| 110015 | GASKET, BLOWER | ||||
| 110014 | GASKET, BLOWER | ||||
| 110011 | GASKET, ACCESS COVER | ||||
| 110010 | COVER, ACCESS | ||||
| 110004 | COVER, BLOWER | ||||
| 110003 | COVER, BLOWER | ||||
| 110002 | COVER, BLOWER | ||||
| 110001 | COVER, BLOWER | ||||
| 109592-2 | COVER, BLOWER SCROLL BRAKE | ||||
| 109592-1 | COVER, BLOWER SCROLL BRAKE | ||||
| 109563-2 | DUCT | ||||
| 109563-1 | DUCT | ||||
| 118217-40L60 | MOTOR ASSY, DRILL AC-575 VAC(L.H.)(400 HP) | ||||
| 118217-40R60 | MOTOR ASSY, DRILL AC-575 VAC(R.H.)(400 HP) | ||||
| 113246 | BRACKET, PRE-FILL VALVE | ||||
| 109561 | IMPELLER, BLOWER | ||||
| 115879 | MOUNT, CABLE | ||||
| 116661-1 | MOUNTING PLATE, MOTOR | ||||
| 109553 | ADAPTER PLATE, BRAKE | ||||
| 109555 | ROTOR, BRAKE | ||||
| 109528 | BRAKE, CALIPER DISC | ||||
| 109594-1 | COVER, BEARING | ||||
| 109594 | COVER, BEARING | ||||
| 109593 | RETAINER, BEARING | ||||
| 118668 | RETAINER, BEARING – UPPER STEM | ||||
| 109522 | BEARING, CYLINDRICAL ROLLER – COMPOUND UPPER | ||||
| 109521 | BEARING, CYLINDRICAL ROLLER – MAIN LOWER | ||||
| 120556 | BEARING, THRUST – TAPER ROLLER | ||||
| 109519 | BEARING, TAPER ROLLER | ||||
| 117987 | BEARING, SPHERICAL ROLLER – COMPOUND LOWER | ||||
| 91829-1 | SLEEVE, STEM | ||||
| 109591 | SLEEVE, WEAR | ||||
| 110040 | SLEEVE, MAIN SHAFT | ||||
| 123290-1000 | ASSEMBLY, WASH PIPE | ||||
| 117937 | GEAR, COMPOUND, HELICAL | ||||
| 117938 | GEAR, BULL, HELICAL | ||||
| 123290 | ASSEMBLY, WASH PIPE (RP) | ||||
| 118173 | ASSEMBLY, SHOT PIN | ||||
| 114237 | BRACKET, HEAT EXCHANGER | ||||
| 110170 | HEAT EXCHANGER, OIL | ||||
| 110013 | BRACKET, RESERVOIR | ||||
| 110068-2 | ASSEMBLY, RESERVOIR – HYDRAULIC OIL | ||||
| 117603-1 | PUMP ASSEMBLY, LUBE (ALUM) | ||||
| 109531 | BONNET | ||||
| 121341 | ROTATING LINK ADAPTER ASSY – 500 TON (CLP) | ||||
| 121131 | MAIN SHAFT W/LANDING COLLAR (CLP) | ||||
| 110125 | COVER, MAIN BODY (CLP) | ||||
| 121227 | BODY, MAIN – 500 TON (CLP) | ||||
| 50008-12-C5D | SCREW, HEX HEAD CAP | ||||
| 50008-11-C5D | SCREW, HEX HEAD CAP | ||||
| 50008-10-C5D | SCREW, HEX HEAD CAP | ||||
| 50008-9-C5D | SCREW, HEX HEAD CAP | ||||
| 50008-8-C5D | SCREW, HEX HEAD CAP | ||||
| 50006-10-C5D | SCREW, HEX HEAD CAP | ||||
| 50006-10-C5 | SCREW, HEX HEAD CAP | ||||
| 50006-6-C5D | SCREW, HEX HEAD CAP | ||||
| 50006-4-C5D | SCREW, HEX HEAD CAP | ||||
| 50005-12-C5D | SCREW, HEX HEAD CAP | ||||
| 50005-8-C5D | SCREW, HEX HEAD CAP | ||||
| 94269-2 | CLAMP, SINGLE PIPE/TUBE/HOSE | ||||
| 50004-6-C5D | SCREW, HEX HEAD CAP | ||||
| 50908-S | WASHER, LOCK-REGULAR SS | ||||
| 50008-12-SD | SCREW, CAP-HEX HD DRILLED | ||||
| Z6001 | LOCKWIRE, Φ.047 | ||||
| Z6000.9 | LOCKWIRE, Φ.051 | ||||
| 53200-242 | COMPOUND, LOCKING (BLUE) | ||||
| 50916-C | WASHER, LOCK – REGULAR | ||||
| 50912-C | WASHER, LOCK – REGULAR | ||||
| 50910-C | WASHER, LOCK – REGULAR | ||||
| 50908-C | WASHER, LOCK – REGULAR | ||||
| 50906-C | WASHER, LOCK – REGULAR | ||||
| 50905-C | WASHER, LOCK – REGULAR | ||||
| 109557 | WASHER | ||||
| 51217-18 | LOCKWASHER, BEARING | ||||
| 51218-18 | LOCKNUT, INTERNAL RETAINER | ||||
| 51806-C | NUT, SELF LOCKING | ||||
| 50006-12-C5D | SCREW, HEX HEAD CAP | ||||
| 50016-28-C5D | SCREW, HEX HEAD CAP | ||||
| 50016-24-C5D | SCREW, HEX HEAD CAP | ||||
| 50016-18-C5D | SCREW, HEX HEAD CAP | ||||
| 50012-26-C5D | SCREW, HEX HEAD CAP | ||||
| 50012-24-C5D | SCREW, HEX HEAD CAP | ||||
| 50012-20-C5D | SCREW, HEX HEAD CAP | ||||
| 50012-18-C5D | SCREW, HEX HEAD CAP | ||||
| 50012-16-C5D | SCREW, HEX HEAD CAP | ||||
| 50012-12-C5D | SCREW, HEX HEAD CAP | ||||
| 50010-18-C5D | SCREW, HEX HEAD CAP | ||||
| 50010-10-C5D | SCREW, HEX HEAD CAP | ||||
| 52824-12-B | BUSHING, PIPE REDUCING-COMMON | ||||
| 56506-6-4-S | ELBOW, 90° EXT PIPE/37° | ||||
| 56518-4-4-S | ELBOW, SWIVEL – INT IT/IT | ||||
| 56502-2-4-S | ELBOW, 45° O-RING BOSS/37° | ||||
| 56525-4-4-S | TEE, SWIVEL INT 37°/37°/37° | ||||
| 56529-8-8-S | CONNECTOR, O-RING BOSS/37° | ||||
| 56529-4-4-S | CONNECTOR, O-RING BOSS/37° | ||||
| 56501-12-8-S | CONNECTOR, EXT PIPE/37° | ||||
| 94821 | PLUG, MODIFIED – 3-8 NPT | ||||
| 56531-8-S | PLUG, O-RING BOSS (WITH O-RING) | ||||
| 56531-4-S | PLUG, O-RING BOSS (WITH O-RING) | ||||
| 53003-16 | PLUG, MAGNETIC | ||||
| 53002-32-C | PLUG, PIPE – SQUARE HEAD | ||||
| 53000-48-C | PLUG, EXT PIPE – COUNTERSUNK HEX | ||||
| 53000-12-C | PLUG, EXT PIPE – COUNTERSUNK HEX | ||||
| 53000-8-C | PLUG, EXT PIPE – COUNTERSUNK HEX | ||||
| 53000-6-C | PLUG, EXT PIPE – COUNTERSUNK HEX | ||||
| 53000-4-C | PLUG, EXT PIPE – COUNTERSUNK HEX | ||||
| 53000-2-C | PLUG, EXT PIPE – COUNTERSUNK HEX | ||||
| 110844-52 | ORIFICE, 1/4 NPT – Φ.205 | ||||
| 94042-12 | ORIFICE, 1/8 NPT – Φ.047 | ||||
| 94041-18 | ORIFICE, 1/16 NPT – Φ.071 | ||||
| 52212-B | ELBOW, 90”-COMMON (150LB) | ||||
| 53219-2 | FITTING, GREASE – STRAIGHT EXTENDED | .125-27 NPT | |||
| 53912-B | NIPPLE, CLOSE | ||||
| 51300-387-F | O-RING, MOTOR/COVER | (RP) | |||
| 51300-385-F | O-RING, MAIN BODY/STEM | (RP) | |||
| 51300-279-B | O-RING, MAIN BODY/OIL PUMP ADAPTER | (RP) | |||
| 51300-277-B | O-RING, COVER/BEARING RETAINER | (RP) | |||
| 51300-258-B | O-RING, MAIN BODY/BEARING COVER | (RP) | |||
| 51300-223-F | O-RING, MAIN BODY/OIL GALLERY | (RP) | |||
| 51300-016-B | O-RING, OIL LUBE TUBE | (RP) | |||
| 110008 | O-RING, MAIN BODY/COVER | (RP) | |||
| 51216-24 | PIN, DOWEL | ||||
| 121272-2 | TUBE ASSEMBLY, BREATHER | ||||
| 121272-1 | TUBE ASSEMBLY, BREATHER | ||||
| 121341 | ROTATING LINK ADAPTER ASSEMBLY, 500TON | ||||
| 53405 | CAP | ||||
| 53406 | CAP | ||||
| 56519-8-6-S | ELBOW, O-RING BOSS/37° | ||||
| 56529-8-4-S | CONNECTOR. O-RING BOSS/37° | ||||
| 56529-8-6-S | CONNECTOR. O-RING BOSS/37° | ||||
| 51437-20 | PIN, COTTER | ||||
| 50516-C | NUT, HEX-SLOTTED | ||||
| 50320-C | NUT, HEX-JAM | ||||
| 50020-32-C5 | SCREW, CAP-HEX HD | ||||
| 112754-116 | BUSHING, ELANGED | ||||
| 119124 | STOP | ||||
| 53200-271 | LOCKING, COMPOUND (RED) | ||||
| 51222-05-12 | PIN, SPIRAL | ||||
| 124029 | SHAFT, PIVOT-LOCKING PIN | ||||
| 119359 | RETAINER, OIL SEAL | ||||
| 53002-12-C | PLUG, PIPE, SQ. HEAD | ||||
| 112754-130 | BEARING, FLANGED | ||||
| 115176 | BUSHING | ||||
| 56531-8-S | PLUG, O-RING BOSS | ||||
| 53408 | CAP | ||||
| 56529-8-8-S | CONNECTOR, O-RING BOSS/37″ | ||||
| Z6001 | LOCKWIRE, 0.051 | ||||
| 53000-4-C | PLUG, PIPE, C’SUNK HEX | ||||
| 53201 | FITTING, GREASE | ||||
| 119358 | BUSHING, TURCITE | ||||
| 117775 | RETAINER RING | ||||
| 119547 | SEAL, WIPER | ||||
| 50912-C | WASHER, LOCK | ||||
| 50012-20-C5D | SCREW, HEX HD | ||||
| 51405-24 | PIN, COTTER | ||||
| 50820-R-C | WASHER, FLAT | ||||
| 50520-C | NUT, HEX-SLOTTED | ||||
| 114594 | BOLT, CATCH LINK | ||||
| 77039 | SEAL | ||||
| 118375 | GLYD RING ROTARY 10.000 ROD | ||||
| 119143 | GLYD RING ROTARY 11.500 ROD | ||||
| 117826 | PISTON RING | ||||
| 119357 | RING, THRUST | ||||
| 119319 | GLYD RING ROTARY 11.000 ROD | ||||
| 51300-381-B | O-RING | ||||
| 51300-273-B | O-RING | ||||
| 117829 | GEAR, ROTATING LINK ADAPTER | ||||
| 51216-14 | DOWEL 01.0 X 1.75 | ||||
| 117833-500 | STEM | ||||
| 121340 | ROTATING LINK ADAPTER 500 TON | ||||
| 121341 | ROTATING LINK ADAPTER ASSEMBLY, 500TON | ||||
| 121403 | HYDRAULIC KIT-TDS-11S | ||||
| 940315-20 | CUNNECTUR, STAUFF #TCM20 | ||||
| 94270-6 | CLAMP, DBL 1/2″ TUBE (NUT SHDWN) | ||||
| 94270-4 | CLAMP, DBL 3/8″ TUBE (NUT SHDWN) | ||||
| 94269-2 | CLAMP, SINGLE 1/4″ TUBE (NUT SHUWM) | ||||
| 56524-4-4-S | ELBOW, 90° EXT PIPE/37° | ||||
| 56162-4-4-S | PLUG, PIPE SQUARE HEAD | ||||
| 53002-12-S | TEE, PIPE, EXT/INT/INT | ||||
| 108216-12 | BALL VALVE | ||||
| 56501-24-16S | CUNNECTUR, EXT PIPE 37° | ||||
| 56530-16-16S | TEE, 37°/37° O-RING BOSS | ||||
| 56517-16-12S | REDUCER, O-RING BOSS | ||||
| 56517-16-6-S | REDUCER, INT 37°/37° | ||||
| 56700-24-16S | REDUCER, PIPE-EXT/INT | ||||
| 56524-8-8-S | CUNNECTUR, EXT PIPE/37° | ||||
| 50906-C | WASHER, LUCK-REGULAR | ||||
| TBD | BRACKET, FILTER | ||||
| 56537-12-12-S | TEE, EXT PIPE37° EXT PIPE | ||||
| 50006-28-C5D | SCREW, CAP-HEX HEAD | ||||
| 50006-06-C5D | SCREW, CAP-HEX HEAD | ||||
| 56519-8-6-S | ELBUW, O-RING BOSS/37° | ||||
| 56519-16-12-S | ELBUW, O-RING BOSS/37° | ||||
| 56501-4-4-S | CUNNECTUR, EXT PIPE/37° | ||||
| 56506-4-4-S | ELBUW, 90° EXT PIPE/37° | ||||
| 56506-16-16S | ELBUW, 90° EXT PIPE/37° | ||||
| 56555-4-4-S | TEE, 7°/37° O -RING BUSS | ||||
| TBD | TUBE ASSY, IBUP PRESS SW/MANIFOLD(l/4 | ||||
| 121512 | TUBE ASSY, QD/MANIFOLD (3/4″ | ||||
| 56519-6-6-S | ELBUW, O-RING BUSS/37° | ||||
| 56519-8-8-S | ELBUW, O-RING BUSS/37° | ||||
| TBD | TUBE ASSY, ACCUMULATOR/MANIEOLD (3/8″ | ||||
| 56556-12-6-S | REDUCER, O-RING BOSS | ||||
| 125100 | TUBE ASSY, LINK ADAPTER LIFT | ||||
| 56551-16-12S | CUNNECTDR, O-RING BOSS/INT PIPE | ||||
| 124191 | HDSE ASSY, PUMP PRESSURE/MANIFOLD | ||||
| 56161-12-S | TEE, INT PIPE | ||||
| 55915-12 | CAP, DUST-PLASTIC (QD) | ||||
| 55913-12-12 | VALVED NIPPLE, QD/EXT PIPE | ||||
| 121726 | TUBE ASSY, PUMP DRAIN/MANIFOLD | ||||
| 56513-12-S | TEE, BULKHEAD UNIUN 37° | ||||
| 56522-6-6-S | ELBOW, BULKHEAD 37°/37° | ||||
| 115918 | ADAPTER, PUMP INLET/DRAIN | ||||
| DELETED | |||||
| 56529-16-16S | CONNECTDR, O-RING BOSS/37° | ||||
| 121724 | TUBE ASSY, PUMP PRESSURE/MANIFOLD | ||||
| 125103 | TUBE ASSY, LUBE PUMP/FILTER | ||||
| 56529-8-8-S | CUNNECTDR, O-RING BOSS/37° | ||||
| 56529-6-6-S | CUNNECTDR, O-RING BOSS/37° | ||||
| 56519-4-4-S | ELBUW, O-RING BOSS/37° | ||||
| 56556-16-8-S | REDUCER, O-RING, BOSS | ||||
| 56541-12 | KIT, FLANGE | ||||
| 56541-16 | KIT, FLANGE | ||||
| 114090-502 | TUBE ASSY, ACCUMULATOR/C’BAL BULKHEAD | ||||
| 117019 | TUBE ASSY, BRAKE UNIUN | ||||
| 118409-500 | TUBE ASSY, LUBE /HEAT EXCHANGER | ||||
| 114087 | TUBE ASSY, MANIFOLD/PUMP | ||||
| 114086-500 | TUBE ASSY, PISTUN PUMP/RESERVDIR | ||||
| 114085-500 | TUBE ASSY, PRE-FILL BULKHD/MANIFOLD | ||||
| 121511 | TUBE ASSY, FILTER/QD | ||||
| 114083 | TUBE ASSY, MANIFULD/CASE DRAIN | ||||
| 125095 | TUBE ASSY, MANIFULD/SHOT PIN | ||||
| 115426 | TUBE ASSY, MANIFULD/LOAD STEM | ||||
| 125099 | TUBE ASSY, MANIFULD/SHOT PIN | ||||
| 125101 | TUBE ASSY, MANIFULD/SHOT PIN | ||||
| 125102 | TUBE ASSY, MANIFULD/SHOT PIN | ||||
| 125104 | TUBE ASSY, LUBE PUMP MANIFOLD/FILTEF | ||||
| 117091-500 | TUBE ASSY, RESERVOIR/VANE PUMP | ||||
| 113988 | TUBE ASSY, PRESS. SWITCH/AIR DUCT | ||||
| 121511-500 | TUBE ASSY, UIL FILTER/MANIFOLD | ||||
| 119029 | TUBE ASSY, UIL FILTER/PRE-FILL VALVI | ||||
| 113985 | TUBE ASSY, RESERVDIR/PRE-FILL MANIFOLD | ||||
| 113984 | TUBE ASSY, PRE-FILL/BULKHEAD | ||||
| 116690 | TUBE ASSY, C’BAL ACCUM/MANIFOLD | ||||
| 113982-500 | TUBE ASSY, CASE DRAIN/RESERVOIR | ||||
| 115425 | TUBE ASSY, MANIFOLD/LOAD STEM | ||||
| 117570 | TUBE ASSY, MANIFOLD/LOAD STEM | ||||
| 118410 | TUBE ASSY, ACCUMULATUR/LOAD STEM | ||||
| 115423 | TUBE ASSY, MANIFOLD/LOAD STEM | ||||
| 115422 | TUBE ASSY, MANIFOLD/LOAD STEM | ||||
| 115421 | TUBE ASSY, MANIFOLD/LOAD STEM | ||||
| 119028 | TUBE ASSY, HEAT EXCHANGE/FILTER | ||||
| 113974 | TUBE ASSY, LUBE MDTUR/MANIFULD | ||||
| 118405 | TUBE ASSY, MANIFOLD/LOAD STEM | ||||
| 125096 | TUBE ASSY, MANIFOLD/SHOT PIN | ||||
| 118408-500 | TUBE ASSY, MANIFOLD/BREAK | ||||
| 114416 | FILTER, HYDRAULIC | ||||
| 111013 | FILTER, ASSY, 60 MICRON, GEAR UIL | ||||
| 111712 | PRE-FILL VALVE ASSEMBLY | ||||
| 110564-1 | ACCUMULATOR, HYDRO-PNEUMATIC 2″ | ||||
| 110563-1 | ACCUMULATOR, HYDRO-PNEUMATIC 4″ | ||||
| 110562-1 | ACCUMULATOR, HYDRO-PNEUMATIC 6″ | ||||
| 121442 | Bail Package | ||||
| Z6001 | LOCKWIRE Φ.051 | ||||
| Z6000.9 | LOCKWIRE Φ.047 | ||||
| 110070 | BUTTON, COUNTERBALANCE | ||||
| 110077 | LUG, COUNTERBALANCE | ||||
| 50912-C | WASHER, LOCK-REGULAR | ||||
| 50908-C | WASHER, LOCK-REGULAR | ||||
| 50008-9-C5D | SCREW, HEX HEAD CAP | ||||
| 50012-20-C5D | SCREW, HEX HEAD CAP | ||||
| 53201 | FITTING, GREASE-. 125-27NPT | ||||
| 109507 | BUSHING, BAIL PIN | ||||
| 110123 | RETAINER, BAIL PIN (CARRIAGE) | ||||
| 109506 | PIN, BAIL (CARRIAGE) | ||||
| 121278-2 | BAIL, 500 TON-120.0” LONG | ||||
| 121278-1 | BAIL, 500 TON-88.0” LONG | ||||
| 122109 | JAW ASSY. 6.38-7.5 OD TOOL JOINT | ||||
| 51402-16-S | PIN, COTTER | ||||
| 50508-C | NUT, HEX SLOTTED | ||||
| 122112 | BOLT, RETAINER | ||||
| 122111 | RETAINER, DIE | ||||
| 122110 | JAW | ||||
| 16401-2 | DIE, TONG | ||||
| 122333 | KIT, INTERMEDIATE TIEBACK | ||||
| -500 | |||||
| 51435-11 | PIN, COTTER 5/32 (.156) | ||||
| 50912—C | WASHER, LOCK REGULAR | ||||
| 50512-C | NUT, HEX-SLTD | ||||
| 50312-C | NUT, HEX-JAM | ||||
| 80900-16 | TURNBUCKLE, 1.0 X 6.0 | ||||
| -5 | ROD, THRD, .75-10 UNC 2A | 112893-2 | |||
| -4 | TUBE | MS00022 | |||
| -3 | PLATE | MS00006 | |||
| -2 | PLATE | MS00006 | |||
| -1 | PLATE | MS00006 | |||
| 122443 | CABLE ASSEMBLY-5 TSP (TDS-10S) | ||||
| 84514-16-1 | TUBING, HEAT SHRINK – CLR | ||||
| 84514-08-1 | TUBING, HEAT SHRINK – CLR | ||||
| 84514-96-1 | TUBING, HEAT SHRINK – CLR | ||||
| 77992-1080 | POTTING COMPOUND | ||||
| 56626-05 | CABLE, TWISTED PAIRS | ||||
| 114725 | LABEL | ||||
| 114729-SL-655-18 | CONNECTOR, INLINE SOCKET | ||||
| 114729-PL-655-18 | CONNECTOR, INLINE PIN | ||||
| 122747 | ADAPTER KIT, PH50 TOOL JOINT | ||||
| 129090 | CROSSOVER SUB 6 5/8 REG X HT55-400 | ||||
| 129089 | SAVER SUB, HT55-400(SHORT) | ||||
| 129090-375 | CROSSOVER SUB 6 5/8 REG X HT55-375 | ||||
| 129089-375 | SAVER SUB, HT55-375(SHORT) | ||||
| 16532 | KEY | ||||
| 51108-C | WASHER, LOCK – HIGH COLLAR 0.500 NOM | ||||
| 50108-12-C | SCREW, SOCKET HEAD CAP – .500-13 UNC X 1.50 LG | ||||
| 50108-16-C | SCREW, SOCKET HEAD CAP – .500-13 UNC X 2.00 LG | ||||
| 50108-18-C | SCREW, SOCKET HEAD CAP – .500-13 UNC X 2.25 LG | ||||
| 50108-20-C | SCREW, SOCKET HEAD CAP – .500-13 UNC X 2.50 LG | ||||
| (TBO) | CROSSOVER SUB, NC26 | ||||
| 118956-1 | SAVER SUB, NC26 (SHORT) | ||||
| 118956 | SAVER SUB, NC26 (LONG) | ||||
| (TBD) | CROSSOVER SUB, NC31 | ||||
| 118955—1 | SAVER SUB, NC31 (SHORT) | ||||
| 118955 | SAVER SUB, NC31 (LONG) | ||||
| (TBD) | CROSSOVER SUB, NC38 | ||||
| 118954-1 | SAVER SUB, NC38 (SHORT) | ||||
| 118954 | SAVER SUB, NC38 (LONG) | ||||
| 114542-600 | CROSSOVER SUB, HT40 | ||||
| 118953-1 | SAVER SUB, HT40 (SHORT) | ||||
| 118953 | SAVER SUB, HT40 (LONG) | ||||
| 120822 | CROSSOVER SUB, NC40 | ||||
| 118952-1 | SAVER SUB, NC40 (SHORT) | ||||
| 118952 | SAVER SUB, NC40 (LONG) | ||||
| 115595 | CROSSOVER SUB, 6 5/8 REG – NC46 | ||||
| 78656-1 | SAVER SUB, NC46 (SHORT) | ||||
| 117812 | SAVER SUB, NC46 (LONG) | ||||
| 79410-3 | CROSSOVER SUB, 6 5/8 REG – NC50 | ||||
| 76666-2 | SAVER SUB, NC50 (SHORT) | ||||
| 117811 | SAVER SUB, NC50 (LONG) | ||||
| 79410-4 | CROSSOVER SUB, 07 1/4 – 5 1/2 F.H. TOOL JOINT | ||||
| 123221-1 | SAVER SUB, 5 1/2 F. H. (SHORT) | ||||
| 123221 | SAVER SUB, 5 1/2 F. H. (LONG) | ||||
| 122109 | JAW ASSEMBLY, 06.63-07,50 O.D. TOOL JOINT | ||||
| 118958 | JAW ASSEMBLY, 03.00-04.00 O.D. NC26 TOOL JOINT | ||||
| 85786-2 | JAW ASSEMBLY, 05.25-06.63 O.D. TOOL JOINT | ||||
| 80492 | JAW ASSEMBLY, 04.00-05.00 O.D. TOOL JOINT | ||||
| 123114 | STABBING GUIDE ASSEMBLY, Φ7.00-07.50 O.D. TOOL JOINT | ||||
| 118957 (TBD) | STABBING GUIDE ASSEMBLY, NC26 TOOL JOINT | ||||
| 118249 | STABBING GUIDE ASSEMBLY, Φ5.25-06.63 O.D. TOOL JOINT | ||||
| 118250 | STABBING GUIDE ASSEMBLY, Φ4.00-05-00 O.D. TOOL JOINT | ||||
| 123114 | STABBING GUIDE ASSEMBLY, Φ7.00-07.50 O.D. TOOL JOINT | ||||
| Z6001 | LOCKWIRE | ||||
| 51402-8-S | PIN, COTTER | ||||
| 50910-N-C | WASHER, FLAT – NARROW | ||||
| 50908-C | WASHER, LOCK | ||||
| 50008-13-C5D | SCREW, CAP HEX HEAD | ||||
| 76445 | RETAINER | ||||
| 76443 | SPRING | ||||
| 76442-1 | GUIDE ARM | ||||
| 76398 | PIN | ||||
| 123520 (TBD) | STABBING GUIDE, GATE Φ7.00-Φ7.50 (MACH CSTG) | ||||
| 123519 (TBD) | STABBING GUIDE, CLAMP CYL. Φ7.00-Φ7.50 (MACH CSTG) | ||||
| 120051-2 | STABBING GUIDE, GATE Φ7.00-Φ7.50 (MACH WMT) | ||||
| 120051-1 | STABBING GUIDE, CLAMP CYL. Φ7.00-Φ7.50 (MACH WMT) | ||||
| 123290 | ASSEMBLY, WASH PIPE 3″ BORE | ||||
| 123292-3 | PACKING SEAL KIT (5 PER SET) | NITRILE/ARIMIDE | |||
| 123289-TC | PIPE, WASH – 3 IN. BORE (HARD) | TUNGSTEN COATED | |||
| 123290-DWG | DWG, 3” WASHPIPE ASSY | ||||
| 86268 | DESSICANT | (NOT SHOWN) | |||
| 56003 | GREASE, GENERAL PURPOSE | (NOT SHOWN) | |||
| 53303-14 | WRENCH, ALLEN-LONG ARM | (NOT SHOWN) | |||
| 123564 | SCREW, SOCKET HD-DOG NOSE | ||||
| 53219-1 | FITTING, GREASE- STRAIGHT EXT. | ||||
| 123562 | RING, SNAP | ||||
| 51300-348-F | O-RING | ||||
| 123292-2 | PACKING SEAL KIT (5 PER SET) | NITRILE/COTTON | |||
| 123289 | PIPE, WASH-3 INCH BORE | ||||
| 123288 | RING, HOLDING, 3” WASH PIPE | ||||
| 123287 | SPACER, LOWER, 3” WASH PIPE | ||||
| 123286 | SPACER, MIDDLE, 3” WASH PIPE | ||||
| 123285 | SPACER, UPPER, 3” WASH PIPE | ||||
| 123284 | NUT, 3″ WASH PIPE | ||||
| 123563 | BOX, PACKING ASSY, 3” WASH PIPE | ||||
| 124221 | HOUSE ASSEMBLY TDS-9S/11S | ||||
| 124221-12345 | |||||
| 121529 | IDM YASKOWA DRIVE (800 HP, 575VAC) | ||||
| 116199 | SIEMENS (800HP 600VAC) | ||||
| 124222 | SYSTEM INTERCONNECT | ||||
| 124519 | Guide Beam Kit | ||||
| 122399 | LINK, GUIDE BEAM HANG-OFF | ||||
| 117788-156 | LINK, HANG-OFF | ||||
| 117788-126 | LINK, HANG-OFF | ||||
| 124517 | GUIDE BEAM, INTERMEDIATE SECTION (18 FT) | ||||
| 124518 | GUIDE BEAM, BOTTOM SECTION (18 FT) | ||||
| 117788-152 | LINK, HANG-OFF | ||||
| 117788-147 | LINK, HANG-OFF | ||||
| 117788-142 | LINK, HANG-OFF | ||||
| 117788-136 | LINK, HANG-OFF | ||||
| 95523 | SHACKLE, 25 TON | ||||
| 117496-1 | PIN, LYNCH | ||||
| 117783 | PIN, RETAINER | ||||
| 117782 | PIN, JOINT | ||||
| 124517-500 | GUIDE BEAM, INTERMEDIATE SECTION (36 FT) | ||||
| 124518-500 | GUIDE BEAM, BOTTOM SECTION (36 FT) | ||||
| 124538 | CARRIAGE ASSEMBLY LEFT | ||||
| 51402-12-S | PIN, COTTER | ||||
| 124535-502 | CARRIAGE, (LEFT), 39.50” SETBACK | ||||
| 124535-500 | CARRIAGE, (LEFT), 33.75” SETBACK | ||||
| 50812-N-C | WASHER, FLAT | ||||
| 113370 | STRAP, ACCUMULATOR, Φ6” | ||||
| 50908-C | WASHER, LOCK-REGULAR | ||||
| 50008-10-C5D | SCREW, HEX HD. CAP, 1/2 UNC X 1.25 | ||||
| 50108-1O-CD | SCREW, CAP-SOCKET HD. 1/2 UNC X 1.25 | ||||
| 88710 | STRAP | ||||
| 125727-2 | PLATE | ||||
| 125727-1 | PLATE | ||||
| 51221 -6-M | PIN, DETENT, 01/2 X 3.50” LG. | ||||
| 125727-3 | FERRULE, BAR | ||||
| 51220-2 | CABLE, RETAINING, .063 DIA. 20” LG. | ||||
| 50906-C | WASHER, LOCK-REGULAR | ||||
| 50006-5-C5D | SCREW, HEX HD. CAP | ||||
| 129375 | BRACKET, ANGLE | ||||
| 51716-24-C | BOLT, SHOULDER SOCKET HD (UNC-3A) | ||||
| 80569 | NUT, JAM, 2”-12 UN-2B | ||||
| 50512-C | NUT, HEX SLOTTED | ||||
| 109944 | BUSHING, FLANGED, 2.75 ID | ||||
| 53000-2-C | PLUG, 1/8”-NPT | ||||
| 51132-C | WASHER, LOCK, HI-COLLAR, 2” DIA. | ||||
| 55224-C | NUT, 1.50-12 UNF | ||||
| 119001-04 | ROLLER, 4” DIA., CROWNED, MODIFIED | ||||
| 30155438 | CAM FOLLOWER 6” DIA | ||||
| 50924-C | WASHER, LOCK – 1.5” | ||||
| 124537 | BOGEY | ||||
| 112875 | PIN, BOGEY PIVOT | ||||
| 124535 | CARRIAGE, (LEFT), 30.00” SETBACK | ||||
| 30124539 | CARRIAGE ASSEMBLY, RIGHT | ||||
| 51402-12-S | PIN, COTTER | ||||
| 124536-502 | CARRIAGE, (RIGHT), 39.50” SETBACK | ||||
| 124536-500 | CARRIAGE, (RIGHT), 33.75” SETBACK | ||||
| 50812-N-C | WASHER, FLAT | ||||
| 125727-1 | PLATE | ||||
| 51221-6-M | PIN, DETENT, Φ1/2 X 3.5” LG. | ||||
| 125727-3 | FERRULE, BAR | ||||
| 51220-2 | CABLE, RETAINING, .063 DIA. 20” LG. | ||||
| 50512-C | NUT, HEX-SLOTTED (UNF-2B) | ||||
| 51716-24-C | BOLT, SHOULDER SOCKET HD (UNC-3A) | ||||
| 80569 | NUT, JAM, 2”-12 UN-2B | ||||
| 125727-2 | PLATE | ||||
| 109944 | BUSHING, FLANGED, 2.75 ID | ||||
| 53000-2-C | PLUG, 1/8” NPT | ||||
| 51 132-C | WASHER, LOCK, HI-COLLAR, 2” DIA. | ||||
| 55224-C | NUT, 1.50-12 UNF | ||||
| 119001-04 | ROLLER, 4” DIA., CROWNED, MODIFIED | ||||
| 30155438 | CAM FOLLOWER, 6” | ||||
| 50924—C | WASHER, LOCK – 1.5″ | ||||
| 124537 | BOGEY | ||||
| 112875 | PIN, BOGEY PIVOT | ||||
| 124536 | CARRIAGE, (RIGHT), 30.00” SETBACK | ||||
| DASH NO | SETBACK | DESCRIPTION | |||
| 30124539-BSC | 30.00 & 39.50 | USED WITH ADDITIONAL SPACER FOR SPECIAL 39.50″ SETBACK | |||
| 30124539-500 | 33.75 | ||||
| 30124539-502 | 39.5 | STD FOR 39.50” SETBACKS | |||
| 3012453-503 | 41 | ||||
| 30124540 | CARRIAGE, PACKAGE | ||||
| 124539-502 | CARRIAGE ASSY, RIGHT, 39.50” SETBACK | ||||
| 124538-502 | CARRIAGE ASSY, LEFT, 39.50” SETBACK | ||||
| 141510 | CARRIAGE SPACER, 39.50” SETBACK | ||||
| 124539-500 | CARRIAGE ASSEMBLY, RIGHT, 33.75” SETBACK | ||||
| 124538-500 | CARRIAGE ASSEMBLY, LEFT, 33.75” SETBACK | ||||
| Z6001 | LOCKWIRE Φ.051 | ||||
| 51212-16 | PIN, SPIRAL | ||||
| 50916-C | WASHER, LOCK REGULAR | ||||
| 50016-20-C5D | SCREW, CAP-HEX HEAD | ||||
| 124539 | CARRIAGE ASSY, RIGHT, 30.00” SETBACK | ||||
| 124538 | CARRIAGE ASSY, LEFT, 30.00” SETBACK |