RUTONG MACHINERY HANDLING TOOLS SPARE PART LIST
DRILL PIPE ELEVATOR
DDZ Series Central Latch Collar Type Elevator
Model DDZ Center Latch Elevators are suitable for handling 18°taper shoulder drill pipe, drilling tools and etc. The Elevators are designed and manufactured according to API Spec 8A/8C-Specification for Drilling and Production Hoisting Equipment.
Main Specification
| Model | Suitable Drill Pipe | 18º Type Elevator Bores | Rated Capacity | Weight | ||
| Drill Pipe style | Drill Pipe Size | Top Bore | Bottom Bore | ton | kg | |
| in | mm | |||||
| DDZ | IEU with 18o shoulder | 5” IEU | 181 | 133.4 | 250 | 278 |
| DDZ | IEU with 18o shoulder | 5” IEU | 181 | 133.4 | 150 | 142 |
| DDZ | EUE with 18o shoulder | 3.1/2 EUE | 139.7 | 120.7 | 150 | 142 |
Spare Parts List for DDZ DRILL PIPE ELEVATOR
| S/N | Part No | Description | Qty | Material | Weight(kg) |
| 1 | RT6501 | Left Body | 1 | High quality steel alloy | 34.8 |
| 2 | RT3903 | Latch Can | 1 | High quality steel alloy | 0.2 |
| 3 | RT3904 | Latch Spring | 1 | High-carbon steel | 0.3 |
| 4 | RT3902 | Latch | 1 | High quality steel alloy | 5.6 |
| 5 | RT3905 | Latch Pin | 1 | High quality steel alloy | 2.0 |
| 6 | GB119-86 | Column pin 8×50 | 1 | High quality steel alloy | 0.1 |
| 7 | RT3907 | Latch Lock Bolt | 1 | High quality steel alloy | 0.5 |
| 8 | RT3906 | Latch Lock | 1 | High quality steel alloy | 2.1 |
| 9 | RT6502 | Right Body | 2 | High quality steel alloy | 35.6 |
| 10 | RT1909 | Link Block | 2 | High quality steel alloy | 1.5 |
| 11 | RT1910 | Link Block Pin | 2 | High quality steel alloy | 0.3 |
| 12 | GB91-86 | Cotter Pin 4 x 40 | 2 | Carbon steel | 0.08 |
| 13 | GB6181-86 | Nut M20 | 2 | High quality steel alloy | 0.2 |
| 14 | GB31.1-88 | Bolt M20 x 75 | 2 | High quality steel alloy | 0.2 |
| 15 | RT3909 | Hinge Pin | 1 | High quality steel alloy | 3.5 |
| 16 | GB1152-74 | Grease Fitting M8 x1 | 1 | Copper | 0.02 |
DRILL COLLAR ELEVATOR
TA Series Central Latch Collar Type Elevator
Introduction
The TA series elevators are hoisting tools for handling tubing and drill pipe and drill collar in oil and gas fields. TA Series elevators are constructed in two halves of practically the same weight, providing balance and easier opening and closing. They are designed and manufactured according to API Spec 8A/8C－specification, made from high quality alloy steel , fully heat treated , equipped with easy operating handles, latch and safety lock combination, link ears in conformance to API Elevator links, handle at rear and properly balanced, light weight type. Used for drilling and production Hoisting Equipment.
Main Specification
| Model | Drill Collar O.D. | Size & Type of Connection of Drill Collar | Zip Lift Recess Dia of Drill Collar | Dia. of Bore(in) | Rated Capacity | Weight | |
| in | in | Top Bore +0-1/32” | Bottom Bore +1/16”-0 | tons | kg | ||
| TA9.1/2/150 | 9.1/2 | 7.5/8” API REGULAR | 8.5/8 | 8.7/8 | 9.5/8 | 150 | 216 |
| TA 8/150 | 8 | 6.5/8” API REGULAR | 7.1/4 | 7.7/16 | 8.1/8 | 150 | 187 |
| TA 8/100 | 8 | 6.5/8” API REGULAR | 7.1/4 | 7.7/16 | 8.1/8 | 100 | 187 |
| TA6.1/2/150 | 6.1/2 | 4” API IF(API NC46) | 5.7/8 | 6 | 6.5/8 | 150 | 187 |
| TA6.1/2/100 | 6.1/2 | 4” API IF(API NC46) | 5.7/8 | 6 | 6.5/8 | 150 | 187 |
| TA4.3/4/65 | 4.3/4 | 3.1/2” API IF(API NC38) | 4.1/4 | 4.3/8 | 4.7/8 | 65 | 77 |
Spare Parts List of TA Series Center Latch Collar Type Elevator
| S/N | Part No | Description | Qty | Material | Weight(kg) |
| 1 | RT-63-1-02 | Left Body | 1 | High quality steel alloy | 68.5 |
| 2 | RT-63-1-08 | Right Body | 1 | High quality steel alloy | 68.5 |
| 3 | RT-63-1-01 | Hinge Pin | 1 | High quality steel alloy | 6.4 |
| 4 | RT-63-1-04 | Latch | 1 | High quality steel alloy | 25.2 |
| 5 | RT-63-1-09 | Latch Pin | 1 | High quality steel alloy | 3.3 |
| 6 | RT-63-1-03 | Latch Spring | 1 | High-carbon steel | 0.8 |
| 7 | RT-63-1–07 | Latch Lock | 1 | High quality steel alloy | 5.2 |
| 8 | RT-63-1–06 | Latch Lock pin | 1 | High quality steel alloy | 2.1 |
| 9 | RT-63-1–05 | Latch Lock Spring | 1 | High-carbon steel | 0.6 |
| 10 | GB879-86 | Roll Pin | 1 | High quality steel alloy | 0.04 |
| 11 | RT-19-09 | Link Block | 2 | High quality steel alloy | 2.2 |
| 12 | RT-78-10 | Link Block Pin | 2 | High quality steel alloy | 0.25 |
| 13 | GB31.1-88 | Bolt | 2 | High quality steel alloy | 0.4 |
| 14 | GB6178-86 | Latch Lock Bolt Nut | 2 | High quality steel alloy | 0.3 |
| 15 | GB91-86 | Cotter Pin | 6 | Carbon steel | 0.05 |
| 16 | GB1152-74 | Grease Fitting | 2 | Copper | 0.02 |
CASING ELEVATOR
SLX Series Side Door Elevator
Introduction
The Elevators are hoisting tools for handling 90°shoulder drill pipe, casing, tubing and drill collar in oil and gas field. The Elevators are designed and manufactured according to API Spec 8A-Specification for Drilling and Production Hoisting Equipment.
Main Specification
| Type | Casing O.D. | Dia. of Bore | Max. load | Weight | ||
| in | mm | in | mm | tons | kg | |
| SLX20/250 | 20 | 508 | 20.7/32 | 513.56 | 250 | 475 |
| SLX18.5/8/250 | 18.5/8 | 473.08 | 18.23/32 | 475.46 | 250 | 475 |
| SLX13.3/8/250 | 13.3/8 | 339.73 | 13.17/32 | 343.69 | 250 | 290 |
| SLX13.3/8/150 | 13.3/8 | 339.73 | 13.17/32 | 343.69 | 150 | 240 |
| SLX9.5/8/250 | 9.5/8 | 244.48 | 9.3/4 | 247.65 | 250 | 187 |
| SLX9.5/8/150 | 9.5/8 | 244.48 | 9.3/4 | 247.65 | 150 | 170 |
| SLX7/250 | 7 | 177.8 | 7.3/32 | 180.18 | 250 | 180 |
| SLX7/150 | 7 | 177.8 | 7.3/32 | 180.18 | 150 | 160 |
| SLX5.1/2/250 | 5.1/2 | 139.7 | 5.19/32 | 142.08 | 250 | 170 |
| SLX5.1/2/150 | 5.1/2 | 139.7 | 5.19/32 | 142.08 | 150 | 160 |
| SLX5/250 | 5 | 127 | 5.3/32 | 129.38 | 250 | 180 |
Spare Parts List for SLX – Series Elevator
| S/N | Part No | Description | Qty | Material | Weight (kg) | Remark |
| 1 | RT1909 | Link Block | 2 | High quality steel alloy | 1.2 | |
| 2 | RT80011a | Body | 1 | High quality steel alloy | 123 | For 5.1/2 |
| 3 | RT80013c | Body | 1 | High quality steel alloy | 136 | For 9.5/8 |
| 4 | RT7902 | Latch Pin | 1 | High quality steel alloy | 0.3 | |
| 5 | RT7903 | Latch Spring | 1 | High quality steel alloy | 0.4 | |
| 6 | RT7905 | Roller Pin | 1 | High quality steel alloy | 0.1 | |
| 7 | RT7906 | Roller | 1 | High quality steel alloy | 0.1 | |
| 8 | GB1152-74 | Grease Fitting | 1 | High quality steel alloy | 0.02 | |
| 9 | RT8002 | Hinge Pin | 1 | High quality steel alloy | 2.7 | |
| 10 | GB879-8 | Retainer Pin | 1 | High Carbon steel | 0.1 | |
| 11 | RT1910 | Link Block Pin | 2 | High quality steel alloy | 0.2 | |
| 12 | GB578286 | Latch Lock Bolt | 2 | High quality steel alloy | 0.2 | |
| 12 | GB618186 | Latch Lock Nut | 2 | Copper | 0.2 | |
| 13 | GB9186 | Cotter Pin | 2 | High quality steel alloy | 0.2 | |
| 14 | RT80031a | Door | 1 | High quality steel alloy | 35 | For 5.1/2 |
| RT80033c | Door | 1 | High quality steel alloy | 39 | For 9.5/8 | |
| 15 | RT7910 | Latch Lock | 1 | High quality steel alloy | 1.9 | |
| 16 | RT7911 | Link Block Spring | 1 | High Carbon steel | 0.1 | |
| 17 | RT7908 | Latch | 1 | High quality steel alloy | 2.1 | |
| 18 | RT7904 | Latch Lock Spring | 1 | High Carbon steel | 0.2 |
Slips
SD Series Rotary Slip
Introduction
The Slips are suitable to handle the drill rods during the oil well drilling operations for the exploration of petroleum and natural gases. It is an essential for coupling and uncoupling.
Main Specification
| TYPE | Body Size | Inset Size | Pipe OD | Inserts | Weight | ||
| in | in | in | mm | Part NO. | Qty | kg | |
| SDXL | 5.1/2 | 5 | 5 | 127 | 2167 | 54 | 110 |
| SDML | 5.1/2 | 5 | 5 | 127 | 2167 | 45 | 96 |
| SDML | 3.1/2 | 2.7/8 | 2.7/8 | 73 | 2161 | 30 | 83 |
| SDML | 3.1/2 | 3.1/2 | 3.1/2 | 88.9 | 2162 | 30 | 83 |
Spare Parts List for SD Rotary Slip
| S/N | Part No | Description | Qty | Material | Weight(kg) |
| 1 | RT 610101 | Handle-Right | 1 | High quality steel alloy | 1.5 |
| 2 | RT2D02 | Slip Segment-Right | 1 | High quality steel alloy | 17 |
| 3 | RT611D03 | Retaining Ring | 3 | High quality steel alloy | 0.3 |
| 4 | RT612D04 | Slip Segment-Left | 1 | High quality steel alloy | 17 |
| 5 | RT610105 | Handle-Left | 1 | High quality steel alloy | 1.5 |
| 6 | GB882-86 | Handle-Pin B18 x 55 | 3 | High quality steel alloy | 0.02 |
| 7 | RT610207 | Hinge Pin | 2 | High quality steel alloy | 0.5 |
| 8 | RT611C08C | 5” Insert | 54 | AISI8620 | 0.4 |
| RT611C08C | 5” Insert | 45 | AISI8620 | 0.4 | |
| RT611D08C | 2 7/8 Insert | 30 | AISI8620 | 0.3 | |
| RT611D08A | 3 1/2 Insert | 30 | AISI8620 | 0.2 | |
| 9 | RT612D09 | Slip Segment Center | 1 | High quality steel alloy | 18 |
| 10 | RT610110 | Handle –Center | 1 | High quality steel alloy | 1.5 |
| 11 | GB2673-86 | Bolt M10 | 6 | High quality steel alloy | 0.1 |
| 12 | GB889-86 | Nut M10 | 6 | High quality steel alloy | 0.05 |
| 13 | GB95-85 | Washer 20 | 3 | Common steel | 0.01 |
| 14 | GB91-86 | Cotter Pin 5 | 3 | Carbon steel | 0.01 |
| 15 | GB91-86 | Cotter PIN 8 | 2 | Carbon steel | 0.01 |
DCS Multi Segment Drill Slip
The Type DCS drill collar slips are designed and manufactured in API Spec 7K and SY5049-91 slips for well drilling. It is manufactured in a structure of multi-segment pieces with firm structure, light weight, and large holding range, which is easy to fit the changing of the external diameter of the drill collar due to wear and tear.
Main Specification
| Type | DCS-L | DCS-L | DCS-R | DCS-S | DCS-S | |
| OD | in | 8-9.1/2 | 6.3/4-8.1/4 | 5.1/2-7 | 4-4.7/8 | 3-4 |
| mm | 203.2-241.3 | 171.45-209.55 | 139.7-177.8 | 101.6-123.8 | 76.2-101.6 | |
| Circular Buttons P/N | 2630-96 | 2630-88 | 2620-63 | 2620—49 | 2628-49 | |
| Total number of segments | 12 | 11 | 9 | 7 | 7 | |
| Weight | kg | 78 | 70 | 51 | 47 | 51 |
| lb | 173 | 154 | 112 | 103 | 112 | |
| Use in insert Bowl Number | API or No.3 | |||||
| Length of grip | 9” | 9” | 7.7/8 | 7.7/8 | 7.7/8 | |
Spare Parts List for DCS Multi Segment Drill Slip
| S/N | Part No | Description | Qty | Material | Weight(kg) |
| 1 | RT-69- | Slip Segment-R | 1 | High quality steel alloy | 4.5 |
| 2 | RT-11-01 | Handle-L&R | 1 | High quality steel alloy | 2.0 |
| 3 | GB91-76 | Cotter Pin | Common steel | 0.01 | |
| 4 | RT-69- | Slip Segment-L | 1 | High quality steel alloy | 4.5 |
| 5 | RT-11-05 | Hinge Pin | 6 | High quality steel alloy | 0.3 |
| 6 | RT-69- | Slip Segment-C | High quality steel alloy | 4.5 | |
| 7 | GB91-86 | Cotter Pin | 7 | High quality steel alloy | 0.01 |
| 8 | RT-61-01-10 | Handle-Intermediate | 1 | High quality steel alloy | 2.0 |
| 9 | GB882-86 | Handle Pin | 7 | High quality steel alloy | 0.1 |
| 10 | GB97.1-85 | Washer | 7 | High quality steel alloy | 0.01 |
| 11 | 2630-96 | Circular Button | 96 | AISI8620 | 0.07 |
| 2630-88 | 88 | AISI8620 | 0.07 | ||
| 2620-63 | 63 | AISI8620 | 0.07 | ||
| 2620-49 | 49 | AISI8620 | 0.07 | ||
| 2628-49 | 49 | AISI8620 | 0.07 | ||
| 12 | GB91-86 | Cotter Pin | 14 | Common steel | 0.01 |
CASING SLIP
Main Specification
| Casing OD | in | 20 | 9.5/8 | 7 | 5.1/2 | 5 | ||
| mm | 508 | 244.5 | 177.8 | 139.7 | 127 | |||
| Circular Buttons P/N | 2631-312 | 2630-168 | 2619-144 | 2620-108 | 2628-108 | |||
| Total number of segments | 26 | 14 | 12 | 9 | 9 | |||
| Weight | lb | 383 | 195 | 185 | 170 | 170 | ||
| kg | 174 | 88.6 | 84 | 77 | 77 | |||
| Min Length of Grip | in | 13.1/2 | 13.1/2 | 13.1/2 | 13.1/2 | 13.1/2 | ||
| No. of Handle Installed | 4 | 4 | 3 | 3 | 3 | |||
Spare Parts List for CASING SLIP
| SLIP TYPE | CMS-XL | |||
| Casing OD(in) | 5,5.1/2,7, 9.5/8, 20 | |||
| S/N | Description | PART NO | WEIGHT(kg) | Material |
| 1 | Slip Segment-R | RT1102a | 5.5 | High quality alloy steel |
| 2 | Handle-L&R | RT1101 | 1.5 | High quality alloy steel |
| 3 | Cotter Pin | GB91-76 | 0.01 | Common steel |
| 4 | Slip Segment-L | RT1103a | 5.5 | High quality alloy steel |
| 5 | Hinge Pin | RT-11-05 | 0.3 | High quality alloy steel |
| 6 | Slip Segment-C | RT1104a | 5.5 | High quality alloy steel |
| 7 | Cotter Pin | GB91-86 | 0.01 | High quality alloy steel |
| 8 | Handle-Intermediate | RT-61-01-10 | 2.0 | High quality alloy steel |
| 9 | Handle Pin | GB882-86 | 0.1 | High quality alloy steel |
| 10 | Washer | GB97.1-85 | 0.01 | High quality alloy steel |
| 11 | Circular Button | AISI8620 | ||
| 12 | Cotter Pin | GB91-86 | 0.01 | Common steel |
CIRCULAR BUTTONS FOR CMS-XL SLIPS
| SLIP SET | CASING OD(in) | CIRCULAR BUTTONS | |||
| PART NO. | WEIGHT | QTY | |||
| lb | kg | ||||
| CMS-XL | 20 | 2631-312 | 52 | 23.3 | 312 |
| 9.5/8 | 2630-168 | 28 | 13 | 168 | |
| 7 | 2619-144 | 36 | 16 | 144 | |
| 5.1/2 | 2620-108 | 19 | 8.6 | 108 | |
| 5 | 2628-108 | 29 | 13.2 | 108 | |