Rig maintenance parts list

HT-400, Plunger Size 4.0″
NO	PART DESCRIPTION	PART NUMBER	HAL-PART NO	QTY	Unit price	Remarks
1	Retainer, Stop and Spring, HT400, No. 3 Suction Valve, Mach. Cast.	100058419	316.22977	6
2	Boot, Suction and Stop, HT400^TM, No. 3, 4 and 5 Frac	100002972	316.25233	12
3	Spring, Lock, Suction Stop, No. 3, HT400	100002841	316.2125	6
4	Pin, Cotter, 1/8 x 1 1/2 inch, HT-400^TM	100002079	70.35717	12
5	Liner, Two Piece Bushing, Valve Guide, HT400, No. 4 Frac, Brass	100002868	316.22005	12
6	Insert, Two Piece Bushing, Valve Guide, Special, HT-400^TM, No 4 Frac	100002867	316.22004	12
7	Spring, Valve, HT400, No. 4 inch	100002837	316.2108	12
8	Valve, HT400,4 inch, Frac	100002824	316.21007	12
9	Insert, Valve, HT400, No. 3 Frac, Urethane, Standard Service (Brown)	100002823	316.21006	12
10	Seat Valve, HT400, No. 3 Frac, Tapered	100002825	316.21008	12
11	O-ring, 90 Duro, 4 x 3 3/4 x 1/8, 568-240	100000968	8.34037	12
12	Retainer, Guide Bushing, HT400, 4 inch Tapered Seat Bore	100002838	316.21096	12
13	Retainer, Cover, HT-400^TM, 4.0 in	100007820	316.2202	6
14	Cover, Discharge, Double Guided Valve, HT-400^TM, 4 in	100002938	316.23091	6
15	Gasket, Discharge Valve & Cylinder Head Cover, No. 4, HT-400^TM	100002878	316.22052	6
16	Ring, Spacer, Discharge Valve & Cylinder Head Cover, No. 4, HT-400^TM	100002877	316.22051	6
17	Liner, Two Piece Bushing, Valve Guide, HT400, No. 4 Frac, Brass	100002868	316.22005	12
18	Insert, Two piece Bushing, Valve Guide, Special, HT-400^TM, No. 4 Frac	100002867	316.22004	12
19	Spring, Valve, HT400, No. 4 Inch	100002837	316.2108	6
20	Valve, HT400, 4.0 In, Frac	100002824	316.21007	6
21	Insert, Valve, HT400, No. 3 Frac, Urethane, Standard Service (Brown)	100002823	316.21006	6
22	Seat Valve, HT400, No. 3 Frac, Tapered	100002825	316.21008	6
23	O-ring, 90 Duro, 4 x 3 3/4 x 1/8, 568-240	100000968	8.34037	6
24	Retainer, Guide Bushing, HT400, 4.0 Inch, Tapered Seat Bore	100002838	316.21096	6
25	Pin Groove, ¹/₂-in x 1¹/₄-in, Type 5	100002081	–	6
26	Sleeve, Wiper Gland, HCLE, 4.0 inch	100002016	–	6
27	Nut, Packing Adjustment, HCLE, 4.0 inch	101328001	–	6
28	Seal, Packing Lube, 4.000, WS-Seal, CDI	101377657	–	6
29	O-ring, 9- Duro, 5 x 4 3/4 x 1/8 568-248	100002016	–	6
30	Carrier, Seal, 4.000, CDI	101377656	–	6
31	Adaptor, Female, 4.000, PEEK, CDI	101377652	–	6
32	Packing, 4.000, CDI, WSP1, PTFE	101377641	–	6
33	Header Ring, 4.000, HNBR, CDI	101377640	–	6
34	Spacer, Fluid End, CDI	101377638	–	6
35	Retainer, Protective Cylinder Head Cover, 4.0 in	100011711	316.22606	6
36	Cover, Protective Cylinder Head, 4.0 in	100002902	316.22605	6
37	Gasket, 3 Discharge Valve & Cylinder Head Cover, 3 3/8 in	100002830	316.21052	12
38	Ring, Spacer, #3 Discharge Valve & Cylinder Head Cover. 3 3/8	100002829	316.21051	12
39	Nose, Plunger, HT-400^TM, 4.0 in	100002885	316.2231	6
40	Seal, Plunge Nose Assembly, HT-400^TM, 4.0	100002884	316.223	6
41	Plunger, 4.0 in, Hard Surface, L-Spacer, HT-400^TM	100002883	316.22294	6
42	Tie Rod, Plunger, HT-400^TM, 4.0 in	100002827	316.21928	6
43	Adaptor, Pushrod, HT-400^TM, 4.0 in, Two Piece Nose	100011706	316.22302	6
44	VALVE, CHECK, 1/8, FEMALE INLET, MALE OUTLET, WITH 70 DURO O-RING	100000592	1.131	6
45	FILTER,HYDRAULIC, OIL, ELEMENT, 25 MICRON	100001698	70.20831	24
46	ELEMENT, OIL FILTER, 0.027 DIA PERFORATIONS, WITH MAGNETS, FOR LF-SKB-G267-3 STRAINER	100001696	70.20813	24
HALLIBURTON C-PUMP 4 X 4 X 12 MIX WATER.
47	IMPELLER, 12 INCH DIAMETER, HALLIBURTON 4 X 4 X 12 CENTRFUGAL PUMP	100003127	350.20501	1
48	SLEEVE, SHAFT, METCO 136F, PUMP, CENTRIFUGAL, HALLIBURTON	100003087	350.12435	3
49	O-RING, 70 DURO, 2 1/8 X 2 X 1/16 568-033, SPEC 70.33000 SPEC, 70.72000	100002400	70.80609	6
50	O-RING, 70 DURO, 12 1/2 X 12 X 1/4 568-453, SPEC 70.33000 SPEC, 70.72000	100001993	70.34019	6
51	O-RING, 70 DURO, 2 X 1 7/8 X 1/16 568-032, SPEC 70.33000 SPEC, 70.72000	100002399	70.80608	6
52	SEAL, OIL, 21159, 2.125 B X 3.000 OD X 0.250 W, CHROME ONLY	100013140	70.80603	4
53	SEAL, OIL, 21163, 2.125 B X 3.000 OD X 0.375 W, CHROME OR 472015 NATIONAL ONLY	100002396	70.80604	4
54	SEAL, OIL, 9189 LPD, 1.875 B X 2.750 OD X 0.375W, JOHNS MANVILLE ONLY	100002397	70.80606	4
55	GASKET, 4 IN NOM, 125 STANDARD FLANGE 1/16 NEOPRENE FULL FACE, 3-M DEMING PUMP	100011821	350.16675	3
56	SCREW, SET, 3/4-10 UNC-3A X 2, CUP PORT, HEX SOCKET, HEAT TREATED ALLOY STEEL, ZINC PLATED, 40 RC MAX, HOLOKROME ONLY, SPEC	100013143	70.80614	6
57	SCREW, SET, 3/4-10 UNC-3A X 3, CUP PORT, HEX SOCKET, HEAT TREATED ALLOY STEEL, ZINC PLATED, 40 RC MAX, HOLLOKROME ONLY, SPEC	100013142	70.80613	6
58	SEAL, OIL, 2.500 B X 3.500 OD X 0.437 W	100002398	70.80607	15
59	BEARING, BALL, RADIAL, 2.165 ID X 5.512 OD X 1.299 THK, SINGLE ROW, HEAVY SERIES,SIMPLEX, 411	100002395	70.80602	1
60	BEARING, BALL, 1/2 PAIR, 2.165 ID X 4.724 OD X 1.141 THK, SINGLE ROW, MEDIUM SERIES, DUPLEX, PART NO 7311	100001442	70.04136	2
HALLIBURTON C-PUMP 6 X 5 X 11 SLURRY .
61	IMPELLER, 10 DIA, PUMP CENTRIFUGAL, 6 X 5 X 10 X 10, HALLIBURTON	100003083	350.12414	2
62	SLEEVE, SHAFT, METCO 136F, PUMP, CENTRIFUGAL, HALLIBURTON	100003087	350.12435	3
63	O-RING, 70 DURO, 2 1/8 X 2 X 1/16 568-033, SPEC 70.33000 SPEC, 70.72000	100002400	70.80609	6
64	O-RING, 70 DURO, 12 1/2 X 12 X 1/4 568-453, SPEC 70.33000 SPEC, 70.72000	100001993	70.34019	6
65	O-RING, 70 DURO, 2 X 1 7/8 X 1/16 568-032, SPEC 70.33000 SPEC, 70.72000	100002399	70.80608	6
66	SEAL, OIL, 21159, 2.125 B X 3.000 OD X 0.250 W, CHROME ONLY	100013140	70.80603	4
67	SEAL, OIL, 21163, 2.125 B X 3.000 OD X 0.375 W, CHROME OR 472015 NATIONAL ONLY	100002396	70.80604	4
68	SEAL, OIL, 9189 LPD, 1.875 B X 2.750 OD X 0.375W, JOHNS MANVILLE ONLY	100002397	70.80606	4
69	GASKET, 6 IN NOM, 125 STANDARD FLANGE -1/16 NEOPRENE FULL FACE, 3-M DEMING PUMP	100008200	350.16677	6
70	GASKET, 5 IN NOM, 125 STANDARD FLANGE -1/16 NEOPRENE FULL FACE, 3-M DEMING PUMP	100011822	350.16676	6
71	SCREW, SET, 3/4-10 UNC-3A X 2, CUP PORT, HEX SOCKET, HEAT TREATED ALLOY STEEL, ZINC PLATED, 40 RC MAX, HOLOKROME ONLY, SPEC	100013143	70.80614	6
72	SCREW, SET, 3/4-10 UNC-3A X 3, CUP PORT, HEX SOCKET, HEAT TREATED ALLOY STEEL, ZINC PLATED, 40 RC MAX, HOLLOKROME ONLY, SPEC	100013142	70.80613	6
73	SEAL, OIL, 2.500 B X 3.500 OD X 0.437 W	100002398	70.80607	15
74	BEARING, BALL, RADIAL, 2.165 ID X 5.512 OD X 1.299 THK, SINGLE ROW, HEAVY SERIES,SIMPLEX, 411	100002395	70.80602	1
75	BEARING, BALL, 1/2 PAIR, 2.165 ID X 4.724 OD X 1.141 THK, SINGLE ROW, MEDIUM SERIES, DUPLEX, PART NO 7311	100001442	70.04136	2
PARTS FOR WOODS COUPLING – HALLIBURTON CENTRIFUGAL PUMP
76	SLEEVE, COUPLING, WOODS 8H, HYTREL	100002395	70.80602	2
77	RING, RETAINING, N5000-112, INTERNAL	100002395	70.80602	1
GM8V71 – ALLISON HT-750 TRANSMISSION
78	FILTER,HYDRAULIC, OIL, ELEMENT, 25 MICRON	100001698	70.20831	4
79	SEAL, SHAFT SHIFTER, FOR ALLISON TRANSMISSION HT-750	100046390	102.29420	2
80	SEAL, 6773311, OIL OUTPUT SHAFT, ALLISON TRANS 4460	100047441	130.04145	2
81	KIT, GASKET	100048276	195.22918	2
82	NUT, OUTPUT FLANGE, SELF-LOCKING, HT-750 DRD	100048288	195.22962	2
83	O-RING, 70 DURO, 4 7/8 X 4 1/2 X 3/16 568-349, SPEC 70.33000 SPEC, 70.72000	100001891	70.33432	4
84	ACCUMULATOR, HYDRAULIC, 15 CUBIC INCH, NOMINAL VOLUME, PRECHARGED TO 20 PSI, SPEC	100020448	70.00136	2
85	O-RING, PICKUP TUBE, GM	100046372	102.28408	2
86	SCREEN ASSEMBLY, FILTER, HT750 DRD, FOR 7 IN DEEP OIL PAN, AFTER SERIAL NUMBER25100-35716, INCLUDES SCREEN, SPACER, O-RING SEAL, AND PAN GASKET	100048295	195.23001	1
87	FILTER,ENGINE, FUEL, SECONDARY, SPIN ON, DDC 6-71 -6V & 8V-71 & 6V & 8V-92 ENGINES	100001711	70.21793	6
88	FILTER,ENGINE, FUEL, PRIMARY, SPIN ON, 6V AND 8V AND 92 SERIES DETROIT DIESEL, 6-71, 4-71, 8.2	100001712	70.21801	12
89	FILTER, ENGINE, FUEL, SPIN ON, SECONDARY,FOR GM 3,4-53, DET 3-53, 4-71,6-71	100002641	102.25876	3
90	FILTER,ENGINE, FUEL, SPIN ON, PRIMARY, FOR GM 3,4-53, DET 6-71, DET 3-53, 4-71	100002640	102.25875	6
91	BELT, V, 31/64 IN W, 67 3/8 IN LG, 36 DEG, MATCHED SET OF 3	100021611	70.07299	4
92	PICKUP, MAGNETIC, INTRINSICALLY SAFE, POWER OUTPUT, 5/8-18-21 UN, 2.5 IN THREAD LG, USED WITH MTH-103D TACHOMETER/HOURMETER	100009327	70.14602	6
93	RECEIVER, HYDRAULIC THROTTLE CONTROL, MODEL 52, COLUMBIAN	100001658	70.17812	6
94	GAUGE, WATER TEMPERATURE, 100-250 DEGREE F, ENGINE, 288 INCH CAPILLARY TUBE, SPEC, MURPHY DRAWING 10-35-0125	100001752	70.24181	6
95	GAUGE, OIL PRESSURE, 0-100 PSI, GENERAL MOTORS ENGINE, SPEC, MURPHY DRAWING 05-35-0094	100001758	70.24244	6
96	GAUGE, OIL PRESSURE, 0-300 PSI, SPEC, MURPHY DRAWING 05-35-0415	100001741	70.24028	4
97	GAUGE, OIL TEMPERATURE, 150-300 DEGREE F, 336 INCH TUBE, SPEC, MURPHY DRAWING 10-35-0708	100013089	70.71408	4
98	TACHOMETER, DIGITAL, 4 DIGIT, LCD, INTRINSICALLY SAFE, 3.375 DIAMETER HOLE, MAGNETIC PICKUP ENERGIZED CSA, LR45322-9	100032707	70.79370	3
99	Service Kit, Air Starter IR 150LFPE88R54-020	100049770		1
DETROIT 4-71 ENGINE (Auxilary)
100	CAP, OIL FILLER	100022466	70.12707	2
101	FILTER,ENGINE, AIR, PRECLEANER AND PANEL FILTER ASSEMBLY<br>FOR FA-240-PLHD FILTER ASSEMBLY (70.22544 OR 70.22548 ASSEMBLIES)	100001692	70.20744	1
102	FILTER, ENGINE, AIR, ELEMENT, PRECLEANER, SECONDARY, GENERAL EQUIPMENT	100001694	70.20799	3
103	ELEMENT, WATER FILTER, DCA 4 WATER SERVICE, SPIN ON, 4 DCA UNITS	100001704	70.21014	2
104	FILTER,ENGINE, FUEL, SECONDARY, SPIN ON, DDC 6-71 -6V & 8V-71 & 6V & 8V-92 ENGINES	100001711	70.21793	4
105	FILTER,ENGINE, FUEL, PRIMARY, SPIN ON, 6V AND 8V AND 92 SERIES DETROIT DIESEL, 6-71, 4-71, 8.2	100001712	70.21801	4
106	THERMOSTAT, 170 DEG OPEN, GM	100046210	102.25804	2
107	PUMP, WATER, 8V-71, GM	100046212	102.25806	1
108	FILTER, ENGINE, OIL, SPIN ON, DETROIT DIESEL 2 CYCLE ENGINES	100011062	102.25874	4
109	PUMP, 5199560, FUEL, GM 8V-71	100046292	102.27487	1
110	GASKET, 5104081, ROCKER COVER, 71 & 92 SERIES, GM	100046235	102.25903	2
111	GAUGE, WATER TEMPERATURE, 100-250 DEGREE F, ENGINE, 144 INCH CAPILLARY TUBE, SPEC, MURPHY DRAWING 10-35-0154	100001753	70.24189	1
112	HOSE, WATER, 1 IN ID, SGL BRAID 19-B	100060141	426.6003	1
113	BELT, V, 31/64 IN W, 41-3/8 IN LG, 36 DEG	100027203	70.35710	4
114	FILTER, ENGINE, OIL, SPIN ON, DETROIT DIESEL 2 CYCLE ENGINES	100011062	102.25874	4
115	Service Kit, Air starter Ingersol Rand 5BM	100049768		1
80 CF STEADY FLOW (Surge Tank)
116	REGULATOR, AIR, 1 IN HPT, 0-30 PSI, PILOT OPERATED, NORGREN, WITH BRACKET,18-001-073, WITH O GAUGE	100035265	70.93412	1
117	GAUGE, PRESSURE, 0-60 PSI, 0-400 KPA, 3 1/2 OR 4 IN, 2%, BRDN TB/BRONZE, 1/4 NPT LM, STEM MOUNT, GLY FILLED, BACK CASE RELIEF	100003355	441.3132	1
118	GAUGE, AIR PRESSURE, 0-50 PSI, SPEC, MURPHY DRAWING 05-35-0714	100001746	70.24058	1
119	WASHER, RUBBER, 3.00 OD X 1.34 ID X 0.5 THK, AERATION CARTRIDGE, SPEC SPEC, 70.72000	100079033	940.04069	6
120	CARTRIDGE, AERATION, 60 DEG CONE, 1/4 CIRCLE, 19.5 WIDE, EXTERNAL NIPPLE	100078930	940.03290	6
121	VALVE, HORIZONTAL CHECK, 1 IN, BRONZE 150, WATER, OIL OR GAS, SPECIAL 70.71972	100000922	6.304	1
122	VALVE, CHECK, 1 IN, FPT, 3000 PSI	100015336	6.7765	1
123	VALVE, BALL, 1 INCH, 1500 CWP, FNPT, BRASS BODY, STAINLESS STEEL TRIM, REINFORCED TFE SEAT & STEM SEAL, VITON BODY SEAL, REG. PART, 3 PIECE SWING OUT BODY, SPEC	100000923	6.4404	1
124	VALVE, WORCESTOR, 2 IN, WITH ADAPTER TO PIPE EXTENSION	100015557	9.40154	1
125	VALVE, RELIEF, SET AT 44 PSI, SIDE FEMALE OUTLET, MALE INLET, 2 X 2, BRONZE BODY & TRIM, WITH LEVER	100014088	9.40918	1
126	VALVE, CHECK, 1 IN FPT	100000926	6.9906	1
127	VALVE, BUTTERFLY, 10 IN, D D H NAO-12-RED RUBBER SEAT-DI DISC-DI BODY, 410 STAINLESS STEEL 7/8 IN, SQUARE STEM-50# WP, DRY SERVICE, BA100 0120 D D H NAO	100016227	13.20596	1
128	HANDLE, OPERATING, 8 & 10 IN BUTTERFLY VALVE, SPECIAL	100016217	13.20371	1
129	SPRING, AIR, RUBBER, 6.0 OD MAXIMUM, 1/4 NPT, FIRESTONE, MODEL 16	100033498	70.83105	3
130	SEAL, RUBBER, RELIEF VALVE, STEADY FLOW SEPARATOR, 6 IN VENT, SPEC, SPEC, 70.72000	100002388	70.79375	3
131	GLASS, SIGHT, STEADY FLOW BIN	100078436	935.49538	9
132	LENS, SIGHT GLASS, STEADY FLOW SEPARATOR	100078439	935.49543	9
133	O-RING – 90D – 4-7/8 X 4-5/8 X 1/8 – 568-247 – SPEC 8.33001 SPEC – 70.72000	100000973	8.34044	5
134	O-RING, 90 DURO, 5 X 4 3/4 X 1/8, 568-248, SPEC 8.33001 SPEC, 70.72000	100000974	8.34045	5
HIGH PRESSURE MANIFOLD SPARES
135	VALVE, PLUG, LO-TORC, 1.75 BORE, 15000 PSI WP, 22500 PSI TEST, WITH 2 IN, MALE & FEMALE 1502 UNION ENDS	100001014	9.126	3
136	RING, SEAL, WITH BACK-UP RING, 2 IN 1502 UNION	100001276	38.09472	25
137	KIT, REPAIR, 1 IN TYPE CERT LO-TORC PLUG VALVE, STANDARD SERVICE, CORROSION RESISTANT ALLOY PLUG, IRON INSERTS, NITRILE SEALS	100015529	9.12794	6
138	KIT, REPAIR, 2 IN, STANDARD SERV, TYPE CERTIFIED, LO TORC PLUG VALVE, CORROSION RESISTANT ALLOY PLUG, IRON INSERTS, NITRILE SEALS	100015708	9.82604	6
139	SEAL, UNION, 2 IN FIGURE 602 & 1502	100001274	38.0947	25
STARTER MOTOR 150 BM IR & COLOMBIAN THROTTLE PARTS.
140	TUNE UP KIT REPAIR	FOR 150 BM		3
141	REAR END PLATE	10 BM-12		2
142	FRONT END PLATE	10 BM-11		2
143	COLUMBIAN THROTTLE REP KIT TRANSMITTER	MODEL-52		1
144	COLUMBIAN THROTTLE REP KIT RECEIVER	MODEL-52		1
RCM III
145	MIXER ASSEMBLY, CEMENT, LOW PROFILE	100011885	412.13700	2
146	INSERT, MIXER, LOW PROFILE, 4.5 IN ID, DEVLON, 7.5 INCHES LONG	100011886	412.13703	2
147	VALVE, BALL, 2 IN, STAINLESS STEEL BODY & STEM, PTFE SEAT, LEVER HANDLE	100013061	70.59014	2
148	VALVE ASSEMBLY, CEMENT THROTTLING, LOW PROFILE	100011884	412.13600	2
149	RING, WEAR, FOR 6 IN DIA ROD, 1/2 IN WIDE, 0.120/0.125 THK, REINFORCED NYLON	100013260	70.99262	4
150	O-RING, 90 DURO, 5 7/8 X 5 5/8 X 1/8 568-255, SPEC 599.33001 SPEC, 70.72000	100012954	70.34052	10
LOW PRESSURE BUTTERFLY VALVE. (FMC/WECO) & AIR ACTUATOR FOR 4″,5″ & 6″.
151	Actuator 2″ TO 5″ WECO	P526829		4
152	Actuator 6″ WECO	P526832		2
153	Repair Kit, Actuator 2″ TO 5″ WECO			10
154	VANE O-RING FOR 4″	3260273		20
155	B/F Valve 3″	3230052	11.7506	4
156	B/F Valve 4″	3229886	12.5082	4
157	B/F Valve 5″	3229887	13.1318	4
158	B/F Valve 6″	3229888	13.1919	2
159	SEAT, BUTTERFLY, V-3 IN, BNO-12N-NITRILE, SUPERSEDES 10.03466, BP030 012N, SEAT NIT	100001095	10.03465	6
160	DISC, BUTTERFLY, V-3 IN, D, 12-DUCTILE IRON SUPERSEDES 10.03472, BP030 0120, DISC DI	100001101	11.03461	6
161	O-RING, 70 DURO, 3/4 X 9/16 X 3/32, 568-113, SPEC 70.33000 SPEC, 70.72000	100001916	70.33817	12
162	PIN, ROLL, 79-040-187-1500, 3/16 X 1 1/2, STAINLESS STEEL	100002566	70.92142	6
163	SEAT, BUTTERFLY, V-4 IN, BNO-12-NITRILE, SUPERSEDES 12.50702, BP040 0120, SEAT BUNA-N	100001146	12.50695	12
164	DISC, BUTTERFLY, V-4 IN, D, 12-DUCTILE, IRON SUPERSEDES 12.50728, BP040 0120, DISC DI	100001147	12.50721	6
165	O-RING, 70 DURO, 3/4 X 9/16 X 3/32, 568-113, SPEC 70.33000 SPEC, 70.72000	100001916	70.33817	12
166	PIN, ROLL, 79-040-187-1750, 3/16 X 1 3/4, STAINLESS STEEL	100013228	70.92143	6
167	HANDLE, OPERATING, 4, 5 & 6 IN WECO, MODEL 12N BUTTERFLY VALVE	100001150	12.50821	10
168	HANDLE B/F VALVE 2-3″	3234078		3
POWER PACK & CONTROL PANEL PARTS.
169	WOOD COUPLING SLEEVE		70.81793	1
170	ELEMENT FILTER		70.81458	3
171	ELEMENT FILTER		71.20831	3
172	O-RING FOR ABOVE		70.33432	3
173	HYD OIL PRESSURE GAUGE 5000 PSI		441.3069	5
174	HYD OIL PRESSURE GAUGE 600 PSI		70.04696	3
175	TEMP GAUGE 100 TO 250 DEG F		70.24112	4
176	ELEMENT FILTER		70.0664	3
177	TANK BREATHER		70.76712	2
178	VALVE – SHUT-OFF – BARKSDALE – 133-R3-HM2 – 1/2 – 2-WAY		4.712	1
179	VALVE – NEEDLE – ALLOY STL – 3/4 FPT E11099 MARSH INSTRUMENT CO.FFG-N151	FFG-N1516	70.06874	2
180	VALVE – NEEDLE – ALLOY STL – 1/2 FPT E11099 MARSH INSTRUMENT CO.FFG-N151	FFG-N1514		2
181	VALVE		70.95017	2
182	TACHO METER		70.79370	2
183	VALVE ASSY 4 WAY AIR		70 93970	1
184	TRANSMITTER COLUMBIAN MODEL 52		70.17811	3
185	REGULATOR		70.38224	1
186	CONTROL HYDRAULIC		70.78059	3
ROTORY ACTUATOR 70.84839
187	PINION O- RING	R2-120-00		6
188	PISTON SEAL	RS-297		3
189	NYLON SLUG	B8457-19		6
190	ROCK BOLT	HTR 009R03		1
191	CYLINDER O-RING	R2-023-00		6
192	O-RING END CAP	R2-018-00		2
193	TIE ROD	CH-C02528-0225		4
194	ROCK BOLT O-RING	R2-009-00		6
195	BACK UP RING	RT8-009-0		6
196	RELIFE VALVE	B 8266		2
197	BEARING RETURNER O- RING	R2-136-00		6
198	DRIVE COUPLING	B 8368		2
199	GASKET	B 8481		4
200	DOWELL PIN	B 8370		2
CEMENT ACTUATOR PARTS 70.87220PARKER
201	O-RING PINION	R2-222-00		6
202	PISTON SEAL	RS-397		3
203	NYLON SLUG	B 8458-38		6
204	O-RING CYLINDER	R2-030-00		6
205	O-RING END CAP	R2-018-00		4
206	O-RING ROCK BOLT	R2-013-00		6
207	O-RING BEARING RETIENER	R2-231-00		6
MISCELLANEOUS PARTS
208	DONKEY DICK RUBBER DIAPHRAM		444.00909	4
209	RUBBER DIAPHRAM 1502		446.05415	4
210	SAFETY VALVE		160.65	2
211	TRANS OUT PUT SHAFT SEAL	6773311	130.04145	2
212	OUT PUT SHAFT NUT TRANS		195.22962	1
213	AIR REGULATOR 0 TO 30 PSI		70.24124	2
214	AIR REGULATOR 0 TO 60 PSI		441.00915	1
215	VICTALIC GASKET 2 INCH			6
216	VICTALIC GASKET 3 INCH			20
217	VICTALIC GASKET 4 INCH			20
218	VICTALIC GASKET 5 INCH			10
219	VICTALIC GASKET 6 INCH			10
220	VICTALIC Coupling 2 INCH (Model 75)			1
221	VICTALIC Coupling 3 INCH (Model 75)			13
222	VICTALIC Coupling 4 INCH (Model 75)			7
223	VICTALIC Coupling 5 INCH (Model 75)			5
224	VICTALIC Coupling 6 INCH (Model 75)			4
225	VICTALIC Coupling 2 INCH (Model 78)			2
226	VICTALIC Coupling3 INCH (Model 78)			2
227	VICTALIC Coupling 4 INCH (Model 78)			11
228	VICTALIC Coupling 6 INCH (Model 78)			2
DATA MONITOR & MICRO MOTION DENSITOMETER
229	Micro Motion Coriolis F‐Series Sensor; 3‐inch; 316L Stainless Steel	F300S410F2BZEZZZZ		1
230	Micro Motion 5700 Micro Motion Field Mount Transmitter	5700R12ABZAZZZA AZZAMV		1
231	Supply, Erection, Installation, and commissioning of DATA Monitor (SYSTEM UPGRADATION)	RETROFIT		1

SPECIAL TOOLS USED ON HT-400
1	ADAPTER, TOOL, INSTALLATION STOP & SPRING RETAINER, CHANNEL, HT-400 FE	100002989	316.27265	1
2	WRENCH, TEE, STOP & SPRING RETAINER, 5 3/4 HT-400 FLUID END	100002983	316.2576	1
3	PUNCH, GUIDE BUSHING REMOVING, 4 IN HP HT-400 FLUID END	100002910	316.2277	1
4	INSERTING TOOL ASSEMBLY, INSERT, #3, #4 & #5 LOC, TAB VALVES, HT-400 FE	100009621	316.2234	1
5	TOOL, SEAL REMOVING, VALVE SEAT, HT-400, 3.38 IN	100002865	316.2180	1
6	GUARD, SAFETY CHAIN, HYDRAULIC VALVE SEAT PULLER 340.390	100003076	340.3908	1
7	RAM ASSEMBLY, HYDRAULIC, AC, VP, T-10, HT-400 & HQ-400 VALVE SEAT	100007829	340.39013	1
8	PULLER ASSEMBLY, #4 FRAC VALVE SEAT, 4 & 4 1/2 HT-400 FE		316.22715	1
9	TOOL, VALVE SEAT INSERTING, HT-400, 4.0, 4.5 IN	100011709	316.2259	1
10	WRENCH, SOCKET, PLUNGER TIE BOLT, HT-400 PUMP FLUID END	100002978	316.2555	1
11	PLUNGER REMOVING TOOL, HT-400 & T-10 FLUID END	100002979	316.25571	1
12	INSERTING TOOL, TIE ROD HALF, T-10 & HT-400 PUMP	100002803	315.90033	1
13	INSERTING TOOL, PLUNGER HALF, T-10 & HT-400 PUMP	100002802	315.90032	1
14	WRENCH, PACKING NUT ADJUSTING, 5 3/4 HT-400 FLUID END	100002977	316.2554	1
15	WRENCH, PACKING NUT ADJUSTING, CONSTANT TORQUE	100058527	316.25508	1
16	DRIVE, PACKING NUT ADJUSTING, 5 3/4 HT-400 FLUID END	100002985	316.2578	1
17	TOOL, PACKING INSERTING, HT-400, 3.38 IN	100002864	316.2174	1
18	WRENCH, BOX, 2 IN 12 POINT, STRIKING FACE	100030687	70.64058	1
19	BAR, TOOL, L/SPACER PLUNGER ADAPTER, HT-400	100058374	316.22173	1
20	WIPER TOOL ASSEMBLY, PUSH ROD, L-SPACER, HT-400	100002835	316.21068	1
21	WRENCH, LOCKNUT, HT-400 FLUID END & POWER END, FOR L-SPACER	100002982	316.25752	1
22	GUIDE, PLUNGER CENTERING, 4 1/2 X 5 1/2, HT-400		316.22518	1
23	TOOL, SLEEVE INSTALLING, HT-400, 4.0, 4.5 IN		316.22985	1