1) O RING SIZE 230*7 5303100580
qty. 2 pcs
2) O RING SIZE 155*5.3 5303100540
qty. 2 pcs
3) CYLINDER ROLLER BEARING (NJ318) 4301000820
Qty. 2 pcs
4) CYLINDER ROLLER BEARING (NU2318) 4301000830
Qty. 2 pcs
5) O-RING (195*7) 5303100500
Qty. 2 pcs
6) O-RING (160*7) 5303100510
Qty. 2 pcs
7) HEXAGONAL HEAD BOLTS (M10*65 4202000970
Qty. 24 pcs
8) HEXAGONAL BOLTS WITH WIRE HOLE ON HEAD (M12*50) 4202000472
Qty. 32 pcs
9) O-RING (265*5.3) 5303101200
Qty. 6 pcs
10) O-RING (475*7) 5303100590
Qty. 6 pcs
11) O-RING (425*7) 530310058
1) Regulator pneumatic 1/4″ NPTF SS313, Range 0-125 PSI
P/N-R36402CKSS – Make: WATTS
Qty: 02nos
2) GCM-B-BBT-BBB 360 Sec, he, Module for Gas Chromatograph,
Part No: 2103220-501 – Make: WATTS
Qty: 02nos
| Sl | Description | P/N | Mfr / Brand | Qty | Unit |
| 1 | Support, Torque Cylinder | 30160381 | NOV | 1 | Ea |
| 2 | Support, Torque Cylinder | 30160381-1 | NOV | 1 | Ea |
| 3 | Modified Auxilary Link | R-30171608M | NOV | 1 | Ea |
| 4 | Tie Rod Assy | R-30171627 | NOV | 1 | Ea |
| 5 | Trunnion, Auxilary Link | 30172735 | NOV | 2 | Ea |
| 6 | Cylinder, Dampner, 300mm Stroke | 30179558 | NOV | 2 | Ea |
| 7 | Assy, Clamp Cylinder ST80 | 30160444 | NOV | 1 | Ea |
| 8 | Duplex Cylinder ST80 | 30171606 | NOV | 1 | Ea |
| 9 | Seal Kit | 30171606-SK | NOV | 1 | Ea |
| 10 | Gland Kit | Magic# ST841282717- | NOV | 2 | Ea |
| 11 | Rod, Duplex Cylinder | Magic# ST841282717-1A | NOV | 1 | Ea |
| 12 | Rod, Duplex Cylinder | Magic# ST841282717-1B | NOV | 1 | Ea |
| 13 | Rod, Duplex Cylinder | Magic# ST841282717-1C | NOV | 1 | Ea |
| 14 | Screw, Cap-Hex Hea | 50014-32-C8D | NOV | 4 | Ea |
| 15 | Pin, Dowel | 51212-16 | NOV | 2 | Ea |
| 16 | Bolt, Hex-Drilled | 50012-15-C5D | NOV | 8 | Ea |
| Sr | Description | Part No | Qty | Unit |
| 1 | PIN:SAFETY 6 MM DIA X 120 MM LG (CLIP STYLE RETAINING PINS COILED) | HHBZ.03 | 25 | Ea |
| 2 | PIN :SAFETY 4 MM DIA X 65 MM LG (CLIP STYLE RETAINING PINS COILED) | HHBZ.02 | 25 | Ea |
| 3 | PIN : SAFETY 3 MM DIA X 50 MM LG (CLIP STYLE RETAINING PINS COILED) | HHBZ.01 | 25 | Ea |
| 4 | PIN: COTTER 1/8″ X 2-1/2″ | 100 | Ea | |
| 5 | PIN: COTTER 5/32″ X 2-1/2″ | 50 | Ea | |
| 6 | PIN: COTTER 3/16″ X 2″ TYPE 316 STAINLESS STEEL 10/PACK | 98355A250 | 10 | PAC |
| 7 | PIN: COTTER 1/16″ X 1″ TYPE 316 STAINLESS STEEL 100/PACK | 98355A030 | 1 | PAC |
| 8 | PIN: SAFETY ( COIL TENSION ) USABLE LENGTH 1-11/16″ OVERALL LENGTH 2-3/4″ (25EA / PACK) | 5 | PAC | |
| 9 | PIN: SAFETY ( COIL TENSION ) USABLE LENGTH 3-3/4″ OVERALL LENGTH 5-3/4″ WIRE DIA: 0.148″ (10EA / PK) | 5 | PAC | |
| 10 | PIN: SAFETY ( COIL TENSION ) WIRE DIA: 3/16″ DIMENSION:A=2-3/4, B=1-1/2″, C=5-1/2 HIGH QUALITY COATED SPRING STEEL (25 PC / PK) | 6 | PAC |
| ITEM | QTY. | PART NO. | MANUFACTURER | DESCRIPTION | UNIT. PRICE |
| 1 | 2 | 15518-FH | NOV | 4″ SDXL 500 Tons Rotary Hand Slips, complete with Flex Handles & dressed with Dies. | |
| 2 | 6 | 2168-54 | NOV | 4″ Die Insert Sets for 4″ SDXL 500 Tons Rotary Hand Slips | |
| 3 | 2 | 202278-400 | NOV | 4″ Slip Assy / Insert Carrier for PS-30 | |
| 4 | 2 | 51202278-400 | NOV | 4″ Dressing Kit for PS-30 | |
| 5 | 120 | 2165 | NOV | 4″ Die Inserts for PS-30 | |
| 6 | 6 | 50004573-6 | NOV | 4″ Load Ring for PS-30 | |
| 7 | 2 | 202346-400 | NOV | 4″ Ram / Ram Inserts for PS-30 | |
| 8 | 2 | 50000675Y777 | NOV | 4″ IU Bushing Insert Sets for BX-4 Eevator | |
| 9 | 2 | 50000675Y778 | NOV | 4″ EU Bushing Insert Sets for BX-4 Eevator | |
| 10 | 2 | 200009Y400 | NOV | 4″ Single Joint Elevator SPL 18° | |
| 11 | 4 | No P/N available | NOV | 4″ XT39 Lifting Caps | |
| 12 | 1 | No P/N available | VARCO | 9 3/4″ – 4″ Adapter Plate Assembly for PRS-4i | |
| 13 | 1 | No P/N available | VARCO | 4″ Flipper Adapter – Left for PRS-4i | |
| 14 | 1 | No P/N available | VARCO | 4″ Flipper Adapter – Right for PRS-4i | |
| 15 | 2 | No P/N available | VARCO | 1″ Screw : Cap – Hex Head for 9 3/4″ – 4″ Adapter Plate for PRS-4i | |
| 16 | 2 | No P/N available | VARCO | 1″ Nut : Hex for 9 3/4″ – 4″ Adapter Plate for PRS-4i | |
| 17 | 4 | No P/N available | VARCO | 5/8″ Screw : Cap – Hex Head for 4″ Flipper Adapters for PRS-4i |
| S/N | Description | Qty | Manufacturer | Part Number |
| 1 | Kit, Repair, Major | 2 | Koomey | 75150999 |
| 2 | Valve, HYD, 4-way, 1″ Selector | 1 | Koomey | 75150100 |
| 3 | Kit, Repair, Minor | 2 | Koomey | 75150998 |
| S/NO | ITEM DESCRIPTION | QTY | RATE |
| SUPPLY OF SPINNER PARTS | |||
| 1 | 545.00LH.2.0.00002 BLADE, ROTOR, FOR SSW 40 PNEUMATIC C SPINNING WRENCH , VARCO SYSTEMS, P/N 14694-39 | 2 | |
| 2 | 545.00LH.2.0.00019 SCREW, HEX HEAD CAP SCREW, FOR SSW-40 SPINNING WRENCH. P/N 50006-7-C8, MFG. NOV, VARCO | 2 | |
| 3 | 545.00LH.2.0.00024 BEARING, BALL, DEEP GROOVE, DOUBLE SHIELD, STANDARD/C3 MAX 2: MIN 1, VARCO SCN: 00131091, NOV, P/N 73090 | 2 | |
| 4 | 545.00LH.2.0.00026 BEARING, RETAINER, VARCO SCN: 00183276, NOV, P/N 201523 | 2 | |
| 5 | 545.00LH.2.3.00026 BEARING, BALL, AIR MOTOR ASSY, FOR PIPE SPINNER SSW 40, NOV, P/N 14694-37 | 2 | |
| 6 | 545.00LH.2.3.00034 BEARING, SPHERICAL ROLLER, LUBRICATION GROOVE WITHOUT HOLES IN OUTER RING DIRT EXCLUSION REVERSE DOUBLE SCN: 00106034, VARCO, NOV, P/N 73091 | 8 | |
| 7 | 545.00LH.2.3.00074 WASHER, THRUST, FOR SSW 40, PNEUMATIC SPINNING WRENCH SCN: 00106036, VARCO, NOV, P/N 73093 | 6 | |
| 8 | 545.00LH.2.3.00086 GASKET, GEAR COVER, FOR SSW 40, NOV, P/N 73092 | 2 | |
| 9 | 545.00LH.2.3.00100 GASKET, HOUSING TO COVER, FOR AIR MOTOR, FOR SSW 40 PNEUMATIC SPINNING WRENCH, NOV, P/N 74555-27 | 2 | |
| 10 | 545.00LH.2.3.00101 GASKET, HOUSING, MOTOR TO GEAR FOR AIR MOTOR ON PNEUMATIC SPINNING WRENCH MODEL SSW-40, VARCO, NOV, P/N 74555-8 | 2 | |
| 11 | 545.00LH.2.3.00150 SHAFT,ROLLER, DRIVE, VARCO, P/N:75244 | 3 |
| Item | Description | Origin/ Manufacturer | Unit | Q-ty | ||
| 1 | Ring, Plastic Packing P/N:SU287019 for 11″ 5000 PSI BOP MFG:Yancheng Sanyi Petrochemical Machinery | MFG:Yancheng Sanyi Petrochemical Machinery | EA | 24 | ||
| 2 | Ring Back-up P/N:SU287017 for 11″ 5000 PSI BOP MFG:Yancheng Sanyi Petrochemical Machinery | MFG:Yancheng Sanyi Petrochemical Machinery | EA | 60 | ||
| 3 | Seal Ring, Connecting Rod P/N:112-331 for 11″ 5000 PSI BOP MFG:Yancheng Sanyi Petrochemical Machinery | MFG:Yancheng Sanyi Petrochemical Machinery | EA | 24 | ||
| 4 | Washer P/N:SU287020 for 11″ 5000 PSI BOP MFG:Yancheng Sanyi Petrochemical Machinery | MFG:Yancheng Sanyi Petrochemical Machinery | EA | 24 | ||
| 5 | Seal Bonnet P/N:SU287006 for 11″ 5000 PSI BOP MFG:Yancheng Sanyi Petrochemical Machinery | MFG:Yancheng Sanyi Petrochemical Machinery | EA | 24 | ||
| 6 | Pin, Ram Guide P/N:SU287022 for 11″ 5000 PSI BOP MFG:Yancheng Sanyi Petrochemical Machinery | MFG:Yancheng Sanyi Petrochemical Machinery | EA | 60 | ||
| 7 | O-Ring, Operating Piston Rod to Int Flg P/N:1185-7.8 for 11″ 5000 PSI BOP MFG:Yancheng Sanyi Petrochemical Machinery | MFG:Yancheng Sanyi Petrochemical Machinery | EA | 24 | ||
| 8 | Ring Retainer P/N:SU287021 for 11″ 5000 PSI BOP MFG:Yancheng Sanyi Petrochemical Machinery | MFG:Yancheng Sanyi Petrochemical Machinery | EA | 24 | ||
| 9 | Sealing Element Nitrile P/N:SB2835E for 11″ 5000 PSI BOP MFG:Yancheng Sanyi Petrochemical Machinery | MFG:Yancheng Sanyi Petrochemical Machinery | EA | 4 | ||
| 10 | Sealing Element Natural P/N:SB283506 for 11″ 5000 PSI BOP MFG:Yancheng Sanyi Petrochemical Machinery | MFG:Yancheng Sanyi Petrochemical Machinery | EA | 4 | ||
| Derrick Charging Pump parts, DE-CP Premium 250/ 8x6x14 , hp:125 | |||||
| Item | Description | Part No. | MAKE | QTY | UOM |
| 1 | Shaft | G0006002 | Derrick | 9 | Each |
| 2 | Outboard Bearing Housing | G0006003 | Derrick | 4 | Each |
| 3 | Packing Gland | G0006004 | Derrick | 33 | Each |
| 4 | Inboard Bearing | G0006005 | Derrick | 11 | Each |
| 5 | Inboard Bearing Cover | G0006007 | Derrick | 4 | Each |
| 6 | Outboard Bearing Cover | G0006008 | Derrick | 22 | Each |
| 7 | Outboard Bearing Cover | G0006009 | Derrick | 4 | Each |
| 8 | Mechanical Seal Repair Kit | G0006013 | Derrick | 30 | Each |
| 9 | Gland Bolt Assembly | G0006014 | Derrick | 22 | Each |
| 10 | Shaft Sleeve, Ceramic, Repair Kit | G0006015 | Derrick | 33 | Each |
| 11 | Stuffing Box Cover for Mechanical Seal | G0006017 | Derrick | 8 | Each |
| 12 | Housing Assembly, 4 x 3 x 13 | G0006026 | Derrick | 4 | Each |
| 13 | Housing Assembly, 5 x 5 x 14 | G0006029 | Derrick | 4 | Each |
| 14 | Housing Assembly, 8 x 6 x 14 | G0006031 | Derrick | 4 | Each |
| 15 | Fluid End Gasket Kit | G0006033 | Derrick | 18 | Each |
| 16 | Impeller Seal, O-Ring | G0006035 | Derrick | 6 | Each |
| 17 | Oil Seal Kit | G0006037 | Derrick | 10 | Each |
| 18 | Power End Gasket Kit | G0006041 | Derrick | 10 | Each |
| 19 | Bearing Lock Nut Kit | G0006045 | Derrick | 10 | Each |
| 20 | Casing Wear Plate, 4 x 3 x 13 | G0006047 | Derrick | 2 | Each |
| 21 | Casing Wear Plate, 6 x 5 x 14 | G0006050 | Derrick | 2 | Each |
| 22 | Casing Wear Plate 8 x 6 x 14 | G0006052 | Derrick | 4 | Each |
| 23 | Impeller ( 10.50″ ), 8 x 6 x 10.50″ | G0006217 | Derrick | 2 | Each |
| 24 | Impeller ( 11″ ), 8 x 6 x 11″ | G0006218 | Derrick | 2 | Each |
| 25 | Impeller ( 11.50″ ), 8 x 6 x 11.50″ | G0006219 | Derrick | 2 | Each |
| 26 | Outboard Bearing Housing Adjusting Bolt | G0006282 | Derrick | 14 | Each |
| 27 | Coupling Key | G0006283 | Derrick | 4 | Each |
| 28 | Outboard Bearing Housing Adjusting Nut | G0006316 | Derrick | 14 | Each |
| 29 | Gland Packing (Graphite) | G0006010 | Derrick | 18 | Each |
| 30 | Gland Packing (Teflon) | G0006012 | Derrick | 15 | Each |
| 31 | Shaft Sleeve (SS) | G0006311 | Derrick | 15 | Each |
| 32 | Shaft Sleeve Seal, O-Ring | G0006036 | Derrick | 30 | Each |
| 33 | Oil Dip Stick, Push in | G0006314 | Derrick | 15 | Each |
| 34 | Breather Plug | G0006160 | Derrick | 15 | Each |
| 35 | stuffing box F/Packing | G0006016 | Derrick | 3 | Each |
| 36 | Impeller 6x5x11.00 8x6x11.00 | G0006168 | Derrick | 3 | Each |
| 70004717 | 327.00GA.4.3.00134 | PLUG, VALVE F/MUD PUMP, IDECO MDL T-1600, P/N PLUG, VALVE FOR MUD PUMP, IDECO MODEL T-1600, P/N 4675-2 SCN: CC010692 | Each | 6 |
| 70004717 | 327.00GA.4.3.00151 | LINER, PUMP, 6-1/2″, CERAMIC, F/IDECO T-1600 MUD PUMP, P/N 07507650 | Each | 8 |
| 70004717 | 327.00GA.4.3.00152 | LINER, PUMP, 6″, CERAMIC, F/IDECO T-1600 MUD PUMP, P/N 07507600 | Each | 8 |
| 70004925 | 300.00EA.4.6.00001 | PLUG, PLUG, 1/2INCH THICK FOR IDECO E 3000 DRAWWORKS, for DRAWWORKS BRAKE BLOCK, MFR : IDECO , P/N : P/N 1PA-128 | Each | 180 |
| 70004925 | 300.00EA.4.8.00001 | SCREW, SCREW, 3/8 INCH-16UNC X 1- 1/8 INCH LNG,120 DEGREE TAPER FLAT HD BRASS MACH FOR IDECO E 3000 DRAWWORKS, for DRAWWORKS , MFR : IDECO , P/N : P/N1C-1834 | Each | 180 |
| 70004925 | 300.00EA.4.9.00001 | NUT, NUT, LOCK 3/8 NC FOR IDECO E 3000 DRAWWORKS, for DRAWWORKS , MFR : IDECO , P/N : N/A |
| ITEM | DESCRIPTION | QNTY |
| 1 | A167244 ECCENTRIC BEARING SHIMS | 6 |
| 2 | 9L-B164206 SHIM SET MAIN BRG 1 LB | 6 |
| 3 | A164453 CROSSHEAD SHIM SET | 6 |
| 4 | 9L-B164425 GASKET PLATE DIAPHRAM 1 LB | 1 |
| 5 | 9L-A164415 GASKET STUFFING BOX 1 LB | 3 |
| 6 | SEAL-STUFFING BOX, W2200 ES211 | 9 |
| 7 | BEARING WRITS PIN NP: B164402 | 9 |
| 8 | 10000002 ANTI ROTATION DOWEL PIN | 10 |
| 9 | 22002200 CAP SCREW | 4 |
| 10 | 72000200 CYLINDER COVER NUT | 2 |
| 11 | 16001600 CYLINDER COVER NUT | 1 |
| 12 | 22002300 DISC SPRING | 4 |
| 13 | 72000411 DUST CAP FOR PRESSURE FITTING | 2 |
| 14 | LINER 5 1/2″ NP EL220 | 7 |
| 15 | 0-RING .275 7.225 70D BU N 1 LB 9L-E0301 | 5 |
| 16 | 59000110 PINLET WITH ADAPTER | 2 |
| 17 | PISTON 5″ P/N EP159 LETOURNEAU | 8 |
| 18 | PISTON 6″ P/N EP117 LETOURNEAU | 12 |
| 19 | PISTON 7″ N/P EP150 | 2 |
| 20 | TS-UB-60-3-HT PISTON DE 6″ MARC: PATRIOT | 9 |
| 21 | 30008400 PISTON LINK PULLER | 1 |
| 22 | 22002400 PISTON ROD | 2 |
| 23 | 22001500 RETENTION NUT | 2 |
| 24 | 72000700 RETENTION NUT | 2 |
| 25 | 72000600 SMALL O RING | 2 |
| 26 | C164718 VALVE GUIDE W2200 SW 12P 5K | 3 |
| 27 | VALVE-SUCTION RELIEF 120 PSI N/P108-1029 | 3 |
| 28 | VALVE SPRING, F/MUD PUMP, PN:SW5710-115L | 8 |
| 29 | 601302524 WEAR PLATE | 8 |
| 30 | 9L-EG170 GASKET CC NEOPRN 3/4 X 1-3/4 | 296 |
| 31 | A164185 INSPECTION COVER GASKET (LARGE) | 3 |
| 32 | 9L-A162209 GASKET, INSPECTION COVER 0 LB | 3 |
| 33 | 9L-EG105 GUAGE PRESS CTR BACK MNT 1LB | 2 |
| 34 | RELIEF VALVE,15 PSI NP 108-1088 CAMERON | 3 |
| 35 | EC181 BOTTOM FLANGE CAPSCREW | 4 |
| 36 | 9L-EV215 VALVE-CHARGING, HP – PO | 1 |
| 37 | CHARGING VALVE O-RING EO190 | 3 |
| 38 | EN137 HEAVY HEX NUT 1.125 7NC A194-2H | 2 |
| 39 | EN132 HEAVY HEX NUT 2.25 8UN A194-2H | 2 |
| 40 | ES174 STUD 1.125 7NC 6.50 B7 | 2 |
| 41 | ES175 STUD 2.25 8UN 8.50 B7 | 2 |
| 42 | 9L-ES194 SEAL-OIL | 6 |
| 43 | EB120 PINION BEARING (CYLINDRICAL ROLL) | 2 |
| 44 | 9L-EG199 GASKET-RING,BX-169SS | 4 |
| 45 | 9L-EG130 GAUGE,PRESSURE, 0-60 PSI 1 LB | 3 |
| 46 | 9L-ES331 SEAL-MECHANICAL | 3 |
| 47 | SWITCH-LOW PRESSURE P/N 108-0764-HZ | 2 |
| 48 | SWITCH-LOW PRESSURE P/N ES452-HZ | 2 |
| 49 | SWITCH-LOW PRESSURE P/N 108-1324-HZ | 2 |
| 50 | 9L-108-0609-HZ COUNTER-STROKE,MAG MD T | 6 |
| 51 | A164191 STROKE COUNTER BRACKET GASKET | 3 |
| 52 | 9L-EG163 GASKET 150# RF FLANGE 12″ |
| Item | Code | Part Number | Quantity | Description |
| 1 | 481222 | 64LH01 | 160 | Southwest, description Piston rubber, dimension 6 |
| 2 | 481248 | 6278-25 | 160 | Southwest, description Piston rod |
| 3 | 481259 | P129 | 144 | Southwest, description HP Valve cover pulg seal |
| 4 | 481413 | SWTM | 2 | Southwest, description Hydraulic seat puller |
| 5 | 487405 | 2974-8 | 96 | Southwest, description Liner seal |
| 6 | 487406 | 62722CW | 96 | Southwest, description Rod clamp |
| 7 | 489250 | 8488-7 | 96 | Southwest, description Screw sleeves setting |
| 8 | 494574 | 1372G7 | 96 | Southwest, description Liner |
| 9 | 494575 | 8422-6 | 96 | Southwest, description Liner wearplate |
| 10 | 536169 | 87BFS | 96 | Southwest, description Failsafe triplex piston |
| 11 | 652869 | 1200H30 | 96 | Southwest, description Hose |
| 12 | 785342 | 773-1 | 288 | Southwest, description Full open valve |
| 13 | 785343 | 873-2 | 288 | Southwest, description Seat |
| 14 | 785344 | 951 | 96 | Southwest, description Spring |
| 15 | 785351 | 4790 | 96 | Southwest, description Upper valve guide retainer |
| 16 | 802364 | 8422A | 6 | Southwest, description Fluid end module complete assembly |
| 17 | 802446 | SWTM-4250 | 2 | Southwest, description Head seat puller |
| SR. NO. | DESCRIPTION | Part No. | QTY. | UNIT |
| 1 | COUPLING DISEGAGING “D-1″ ASY DRAWWORK ” NATIONAL ” IDEAL TYPE ’55’ | 622125-G | 1 | Number |
| 2 | CLUTCH ASSY., TYPE “C” ASY DRAWWORK ” NATIONAL ” IDEAL TYPE ’55’ | 703248-A | 1 | Number |
| 3 | SHIFTER ASSEMBY. ASY | 624141-AA1 | 1 | Number |
| 4 | BRAKE SPEAR ASSY DRAWWORK ” NATIONAL ” IDEAL TYPE ’55 | 624838-AA1 | 1 | Number |
| 5 | COUPLING SHIFTER BRACKET, ASSY DRAWWORK ” NATIONAL ” IDEAL TYPE ’55 | 624880-A | 2 | Number |
| 6 | COUPLING SLEEVE. ASSY FOR DRAWWORKS “NATIONAL ” IDEAL TYPE ’55’ | 621839-A | 1 | Number |
| 7 | AUXILERY BRAKE SHIFTER SHAFT, ASSY FOR DRAWWORKS “NATIONAL ” IDEAL TYPE ’55’ | 624944-A | 1 | Number |
| 8 | COUPLING HUB, ASSY FOR DRAWWORKS “NATIONAL ” IDEAL TYPE ’55’ | 619540 | 1 | Number |
| 9 | WATER SPEAR ASSEMBLY,ASSY FOR DRAWWORKS “NATIONAL ” IDEAL TYPE ’55’ | 624838-A | 1 | Number |
| 10 | RING, CLUTCH SHIFTER. ASSY DRAWWORKS “NATIONAL ” IDEAL TYPE ’55’ HYDROMATIC BRAKE INSTALLATION | 613112-A | 1 | Number |
| MODEL 1250AC-681 TOP DRIVE DRILLING SYSTEM;S/N 588 MANUAL_01 | ||||
| MFG:CANRIG | ||||
| 1 | Part ID: 694-22-0 Description: RUNNER. GUIDE. 102LG Item:1;Drawing ID: AY10008-X Rev No: F; | EA | 4 | CANRIG |
| 2 | Part ID: SH-1000NC-0300-W Description: CAPSCR, HEX SOC HD, 1-8UNC x 3.00 Item:15. Drawing ID: AY10008-X Rev No: F; | EA | 8 | CANRIG |
| 3 | Part ID:SH-1000NC-0275-W Description: CAPSCR.HEX SOC HEXSOC HD 1-8UNCx2.75.WIRED Item:16; Drawing ID: AY10008-X Rev No: F; | EA | 16 | CANRIG |
| 4 | Part ID:AY10028-4 Description: TELESCOPING TUBE ASSY Item:04; Drawing ID: AY11240 Rev No: F; | EA | 2 | CANRIG |
| 5 | Part ID:R02-1000-010 Description: GRIPPER DIE Item:02; Drawing ID: AY12689 Rev No: A; | EA | 2 | CANRIG |
| 6 | Part ID:F451JSJS080808-24.8-X-22 Description: HOSE ASSY,1/2,SWV STR SWVSTR,24.8 Item:24;Drawing ID: AY10498 Rev No: B; | EA | 4 | CANRIG |
| 7 | Part ID:F451JSJ7080808-85.07-X-82 Description: HOSE ASSY 1/2,SWV STR 45° ELL, 85.07 Item:32;Drawing ID: AY11920-3 Rev No: K; | EA | 4 | CANRIG |
| 8 | Part ID:F381JS01121212-67.50-X-64 Description: HOSE ASSY 3/4.SWV STR MALE NPT.67.50 Item:01;Drawing ID: AY10199 Rev No: D; | EA | 2 | CANRIG |
| 9 | Part ID:F381JSJ7121212-49.26-X-46 Description: HOSE ASSY, 3/4, SWV STR,45° ELL, 49.26 Item:02;Drawing ID: AY10199 Rev No: D; | EA | 2 | CANRIG |
| 10 | Part ID:F381J701121212-109.51-X-106 Description: HOSE ASSY,3/4,45DEG ELL, MALE NPT 109.51 Item: 03; Drawing ID: AY10199 Rev No: D; | EA | 2 | CANRIG |
| 11 | Part ID:F08-1003-010 Description: NIP CLOSE STD 1NPT.A106; Item:20;Drawing ID: AY10538 Rev No: G; | EA | 1 | CANRIG |
| 12 | Part ID:722-10-0 Description: WASHPIPE 3.00. BORE 5000PSI Item:01;Drawing ID: AY10031 Rev No: A; | EA | 3 | CANRIG |
| 13 | Part ID:DT12642 Description: CYLINDER, LINK TILT Item:09.Drawing ID: AY10017 Rev No: J; | EA | 2 | CANRIG |
| 14 | Part ID:593-43-0 Description: TJC ASSY,7.63-8.38-MALE HALF HT Item:02.Drawing ID: AY13244 Rev No: 0; | EA | 2 | CANRIG |
| 15 | Part ID:10210 Description: SIGHT GLASS Item:33; Drawing ID: AY10538 Rev No: G;MODEL 1250AC-681 TOP DRIVE DRILLING SYSTEM;S/N 588 MANUAL_01 | EA | 2 | CANRIG |
| 16 | Part ID:HH-0500NC-0100-GR8-W Description: CAPSCR. HEXHD.1/2-13UNCx1.00.GR8.W Item:17;Drawing ID: AY10518 Rev No: A; | EA | 8 | CANRIG |
| 17 | Part ID:LW-0500-NL-SP Description: LOCKWASHER 1/2-SP NORD-LOCK Item:04;Drawing ID: AY12689 Rev No: A; | EA | 8 | CANRIG |
| 18 | Part ID:R01-1003-01A Description: GREASE NIPPLE Item:06;Drawing ID: AY10031 Rev No: A; | EA | 20 | CANRIG |
| 19 | Part ID:AY10031 Description: WASHPIPE ASSY 3.0 BORE 5 K WASHPIPE ;Eng ID: 1;Drawing ID: AY10031 Rev No: A; | EA | 1 | CANRIG |
| 20 | Part ID:AY10100 Description: GEARBOX/MOTOR ASSY, HANDLER ROTATE;Eng ID:0;Drawing ID: AY10100 Rev No: A; | EA | 1 | CANRIG |
| 21 | Part ID:920-11-0 Description: LOCK CYLINDER; Item:02;Drawing ID: AY10392X Rev No: D; | EA | 2 | CANRIG |
| 22 | Part ID:M11-1034-010 Description: RETAINING RING ,EXT ;Item:13;Drawing ID: AY10392X Rev No: D; | EA | 20 | CANRIG |
| 23 | Part ID:1016-100-325 Description: PIN; Item:08;Drawing ID: AY10392X RevNo: D; | EA | 2 | CANRIG |
| 24 | Part ID:DT13705 Description: FRAME, SWING MOUNT, RECOVERY AIR, 750,AC Item:02;Drawing ID: AY12300 Rev No: B; | EA | 1 | CANRIG |
| 25 | Part ID: AY10518 Description: MORTOR/PUMP ASSY HPU,20HP,460V Eng ID: 0;Drawing ID: AY10518 Rev No: A; | EA | 1 | CANRIG |
| 26 | Part ID:H01-1008-010 Description: HYDRAULIC PUMP; Item:05; Drawing ID: AY10518 Rev No: A; | EA | 1 | CANRIG |
| 27 | Part ID:LW-0312-NL Description: LOCKWASHER, 5/16 NORD-LOCK Item:09; Drawing ID: AY12689 Rev No: A; | EA | 4 | CANRIG |
| 28 | Part ID:HH-0312NC-0075-GR8W Description: CAPSCR, HEX HD, 5/16-18UNC x .75, W Item:08; Drawing ID: AY12689 Rev No: A; | EA | 4 | CANRIG |
| 29 | Part ID:H07-1028-010 Description: CHECK VALVE Item:27; Drawing ID: AY10538 Rev No: G; | EA | 2 | CANRIG |
| 30 | Part ID:M03-1002-020 Description: COUPLING ELEMENT; Item:04;Drawing ID: AY10016-X Rev No: A; | EA | 2 | CANRIG |