| ZDPE ROTARY TABLE PARTS LIST | ||
| ZP-375 Rotary Table (ZDPE) Parts list | ||
| Description | PN | |
| 1 | Lock pawl-left | 105.06.01 |
| 2 | Lock pawl-right | 105.06.02 |
| 3 | Pin, handle lock pawl | 105.06.03-1 |
| 4 | Grease fitting | GB1152-89-M10×1 |
| 5 | Pin, lock pawl | 105.08.10-1 |
| 6 | Plug | 105.06.05(1/8″) |
| 7 | Screw, hex soc hd | 105.06.10.00 |
| 8 | Grease fitting | GB70-85-M24×75 |
| 9 | Plate, l .D | 105.08.20 |
| 10 | Screw | GB67-85-M4×8 |
| 11 | Dipstick, oil | 105.08.30.00 |
| 12 | Plug | 105.06.07(1 1/2″) |
| 13 | Housing | 105.08.20.00 |
| 14 | Tongue | 105.06.08 |
| 15 | Cover | 105.08.10.00 |
| 18 | Table installation | 105.08.40.00 |
| 18.1 | Ring gear (spiral teeth) | 105.08.40.11 |
| 18.2 | Table | 105.08.40.02 |
| 18.3 | Bearing | 2687/1049 |
| 18.4 | Columnar pin | 105.08.40.03 |
| 18.5 | Support, bearing | 105.08.40.04 |
| 18.6 | O-Ring | 105.08.40.05 |
| 18.7 | Screw | GB70-85-M24×60 |
| 18.9 | Washer, spring | GB93-87-24 |
| 18.10 | Shim | 105.08.40.06 |
| 18.11 | Shim | 105.08.40.07 |
| 18.12 | Shim | 105.08.40.08 |
| 19 | Lock pawl | 105.08.02 |
| 20 | Pin | 105.05.19 |
| 21 | Pin, cotter 5×36 | GB91-86-5×36 |
| 22 | Kelly bushing installation | 105.54.00(23/8〞～85/8〞) |
| 22.1 | Kelly bushing | 105.54.01 |
| 22.2 | Board | 105.54.02 |
| 24 | Pin | 105.54.03 |
| 25 | Shim | 105.08.08 |
| 26 | Pinion shaft assembly | 105.08.50.00 |
| 35 | Screw | GB5783-86-M16×35 |
| 36 | Washer, spring 16 | GB93-87-16 |
| 37 | Slinger | 105.08.09 |
| 40 | Sprocket retainer | 105.08.14 |
| 41 | Flange | 105.08.15 |
| 42 | Main Kelly bushing installation | 105.08.07.00 |
| 42.1 | Main Kelly bushing | 105.08.70.04 |
| 42.2 | Spacer | 105.08.70.02 |
| 42.3 | Board | 105.08.70.03 |
| 43 | Screw | 105.08.03 |
| 44 | Nut | 105.08.04 |
| 45 | Washer, spring 28×35×2 | D3-3-67-28×35×2 |
| 46 | Valve DN32(11/4〞) | GB8465.1-87-DN32 |
| 47 | Joint R11/4 | GB3289.26-82(R11/4) |
| 2.Pinion Shaft Assembly | ||
| No. | Denomination | Drawing No. |
| Pinion Shaft Assembly | 105.08.50.00 | |
| 1 | Pinion (spiral teeth) | 105.08.12 |
| 2 | End-plate of bearing | 105.08.50.09 |
| 3 | Bearing | GB283-64-32630) |
| 4 | O-Ring | 105.08.50.02-470×8.6 |
| 5 | Spacer | 105.08.50.04 |
| 6 | Drain plug 1〞 | 105.08.60.00 |
| 6.1 | Drain plug 1〞 | 105.08.60.01(1〞) |
| 6.2 | Magnet | 105.08.60.02 |
| 6.3 | Pin, cotter 2×12 | GB91-86(2×12) |
| 7 | Shaft, pinion | 105.08.50.03 |
| 8 | Bearing | GB286-64-3630 |
| 9 | ScrewX | GB5783-86-M20×60 |
| 10 | Washer, spring 20 | GB893-87-20 |
| 11 | Shim | 105.08.50.05 |
| 12 | Capsule | 105.08.51.00 |
| 13 | Shim | 105.08.50.06 |
| 14 | Seal, oil | D7-1-67-180×220×15 |
| 15 | Retainer, pinion end | 105.08.50.07 |
| 16 | Pinion shaft housing | 105.08.50.10 |
| 17 | Key | 105.08.50.08 |
| 18 | Sprocket retainer | 105.08.50.11-150 |
| 19 | Screw with head holes | GB32.1-88-M16×35 |
| 23 | Screw with head holes | GB32.1-88-M20×45 |
Rotarytableparts4
Posted in InventoryList.