Serva Frac Pump
SERVA QPA 1000 Quintuplex Plunger Pumps are good for high-pressure well service. Each pump is equipped with a gear case. The Quintuplex Pump is designed to pump cement slurries, sand-laden fluids, crude oil, acids, mud and other oil well servicing fluids.
SPECIFICATIONS
POWER END
- Rated maximum brake horsepower: 1,000 bhp
- Maximum rod load: 100,000 lbs
- Stroke length: 6″
- Gear ratio: 4.6:1
- Plunger: 3″ to 4.5″
- Pump weight: 7,000 lbs
POWER END FEATURES
- Crankshaft construction
- Pressure-lubricated wrist pins through crankshaft
- Ground, honed crosshead guides
- Proprietary crosshead coating
- Left or right gearbox mounting
- 16 input drive positions
The TPA-2250 is a reciprocating, positive displacement, horizontal single-acting, triplex plunger pump which is rated at 2,250 brake horsepower input maximum. The pump is designed for severe-duty well service applications such as acidizing, fracturing, well killing, etc.
The TPA-2250 Pump consists of a power end assembly and a fluid end assembly. Four different fluid cylinders are available to accommodate several plunger sizes for a variety of pressures and volumes.
SPECIFICATIONS
POWER END
- Companion flange 1800 Series Spicer
- Input spline 3″–10″ (7.62 cm)
- Input speed w/18.4:1 or 8.6:1 gears 2,400 max rev/min
- Maximum input torque 7,215 ft-lb
- Maximum input horsepower 600 hp
- Maximum rod load 175,800 lbs
FLUID END
- Fluid-end type: Three-piece forged steel
- Plunger type: Hard-surfaced
- Valve type: Double stem guided, carburized
- Valve seats: Carburized
- High-performance pressure packing
- Discharge flange (1) Blank, straight with one outlet or (2) ell with two outlets
The heavy-duty QPA-2500 pump consists of a power end assembly and a fluid end assembly. Four different fluid cylinders are available to accommodate several plunger sizes for a variety of pressures and volumes.
SPECIFICATIONS
- Rated maximum brake horsepower 2,500 bhp (1,862 Kw)
- Maximum rod load 192,325 lbs (87,331.3 kg)
- Stroke length 8″ (203.2 mm)
- Gear ratio 6.353:1
- Length 85″ (2,160 mm)
- Width 74″ (1,880 mm)
- Height 43″ (1,092 mm)
- Weight dry (approximate) 15,000 lbs (6,804 kg)
The heavy-duty QPA-2500 pump consists of a power end assembly and a fluid end assembly. Four different fluid cylinders are available to accommodate several plunger sizes for a variety of pressures and volumes.
SPECIFICATIONS
- Rated maximum brake horsepower 2,500 bhp (1,862 Kw)
- Maximum rod load 192,325 lbs (87,331.3 kg)
- Stroke length 8″ (203.2 mm)
- Gear ratio 6.353:1
- Length 85″ (2,160 mm)
- Width 74″ (1,880 mm)
- Height 43″ (1,092 mm)
- Weight dry (approximate) 15,000 lbs (6,804 kg)