| Zhongyuan Drill & Production Equipment Plant of ZPEB SWIVEL PARTS LIST | ||
| ZDPE SL-450, SL-350,SL-315, SL-250,SL175,SL135 SWIVEL | ||
| ZDPE XSL-450, XSL-350,XSL-315, XSL-250,XSL175,XSL135 SWIVEL | ||
| SL450-5 SWIVEL (ZDPE) PARTS LIST | ||
| 104.16.00 | Swivel | |
| 1 | 104.09.01 | Bail |
| 2 | 104.05.02 (2”) | Plug |
| 3 | 104.05.33 | Gooseneck |
| 4 | GB898-88-AG-M24×65-8.8 | Stud |
| 5 | GB6170-86-M24-8 | Nut |
| 6 | GB93-87-24 | Washer, spring |
| 7 | 104.07.01 | Support, gooseneck |
| 8 | 104.05.30.00 | Packing, assembly |
| 9 | 104.05.07 | Umbrella |
| 10 | 104.05.08-1 | Bushing (upper) |
| 11 | D7-1-67-220×260×18 | Spring Sealing Ring |
| 12 | 104.06.16 | Spacer |
| 13 | 104.05.24 | Snap, ring |
| 14 | GB297-84-2007140 | Bearing |
| 15 | 104.07.02 | Shim |
| 16 | GB5783-86-M20×40-8.8 | Bolt |
| 17 | GB93-87-12 | Washer, spring |
| 18 | 104.05.10.00 | Bumper |
| 19 | GB5781-86 -M20×60-8.8 | Bolt |
| 20 | GB93-87-20 | Washer, spring |
| 21 | GB97.1-85-20 | Washer, spring |
| 22 | 104.073.03 (m=5 z=110) | Gear-ring (disc) |
| 23 | 104.16.01 | Stem |
| 24 | GB67-85 -M4×8 | Screw |
| 25 | 104.16.05 | Plate, name |
| 26 | 104.002GG (19954EQ) | Bearing |
| 27 | 104.16.06 | Body |
| 28 | D4-5-73-560×8.6 | O-ring O |
| 29 | GB70-85-M24×65 | Screw, hex soc hd |
| 30 | GB283-81-32148 | Bearing |
| 31 | 104.05.27-1 | Retainer, oil seal |
| 32 | 104.05.19(1”) | Plug |
| 33 | 104.16.04-M12×1.25 | Screw |
| 34 | D3-4-67-12×20×2 | Gasket |
| 35 | D7-1-67-250×290×18 | Spring Sealing Ring |
| 36 | 104.05.15-1 | Spacer |
| 37 | 104.05.28-1 | Plate, end |
| 38 | GB70-85-M16×30 | Screw, hex soc hd |
| 39 | GB93-87-16 | Washer, spring |
| 40 | 104.05.17-1 | Bushing (lower) |
| 41 | D4-4-66-155×8.6 | O-ring |
| 42 | 104.05.38 | Coupling |
| 43 | 104.06.12 | Protector, thread |
| 44 | GB1152-89-M10×1 | Grease fitting |
| 45 | F11-1.8-93 | Connection body 14/R1/4 |
| 46 | GB3289.37-82 (Rc1 1/2) | Union pipe swing |
| 47 | 104.07.02.00-1 | Pipe |
| 48 | GB3763-83-M22×1.5 | Nut |
| 49 | 104.07.16 | Pipe nipple |
| 50 | 104.07.03.00-2 | Ф10 soft pipe assembly |
| 51 | 104.07.04.00-2 | Ф10 soft pipe assembly |
| 52 | GB897-88-AM16×65 | Stud |
| 53 | GB897-88-AM16×100 | Stud |
| 54 | GB6170-86-M16 | Nut |
| 55 | 104.07.06.00 | Pneumatic motor and drive system |
| 56 | 104.05.32 | Sleeve, hose union |
| 57 | D4-4-66-120×5.7 | O-ring |
| 58 | 104.05.04-1 | Nut, hose union |
| 59 | D4-4-66-165×8.6 | O-ring |
| 60 | 104.07.09 | Limit plate |
| 61 | JYPGH-01 | Retainer, Oil Seal |
| 62 | GB3289.2-82 (Rc1 1/2) | Elbow bend |
| 63 | GB3289.26-82 (R1 1/2) | Sleeve, hose union |
| 64 | 104.07.13 | Shim |
| 65 | FB-01 | Plate, stop (outside) |
| 66 | 104.07.50.00 | Connecting body 14/ |
| 67 | 104.07.12 | Limit Plate |
| 68 | 104.09.08 | Pin, bail |
| 69 | GB893.1-86-130 | Plate, stop (outside) |
| 70 | F11-1.11-93 | Connecting body 14/R1/4 |
| 2. Pneumatic motor and air drive system | ||
| No. | Drawing No. | Denomination |
| 104.07.06.00 | Pneumatic motor and drive system | |
| 1 | FMS-20 | Pneumatic motor |
| 2 | GB3289.26-82 (R2) | Sleeve, hose union |
| 3 | GB3289.2-82 (Rc2) | Elbow bend |
| 4 | GB5783-86-M16×35 | Bolt |
| 5 | GB93-87-16 | Washer, spring |
| 6 | 104.07.06.03 | Pedestal |
| 7 | 104.07.06.04 | Small gear |
| 8 | GB894.1-86-28 | Snap ring |
| 9 | 36110 | Bearing |
| 10 | D4-4-66-16×2.4 | O-ring |
| 11 | 104.07.06.05 | Spacer |
| 12 | 104.07.06.35 | Woolen ring |
| 13 | 8120 | Bearing |
| 14 | 104.07.06.06 | Out-join cover |
| 15 | 104.07.06.07 | Out-rub piece I |
| 16 | 104.07.06.08 | Out-rub piece II |
| 17 | 104.07.06.09 | Out-rub piece III |
| 18 | 104.07.06.10 | Out-rub piece IV |
| 19 | 104.07.06.11 | Out-rub piece V |
| 20 | 104.07.06.31 | Inner-rub piece I |
| 21 | 104.07.06.32 | Inner-rub piece II |
| 22 | 104.07.06.33 | Inner-rub piece III |
| 23 | 104.07.06.34 | Inner-join cover |
| 24 | 104.07.06.16 | Adding power cover |
| 25 | GB893.1-87-75 | Snap ring |
| 26 | 109 | Bearing |
| 27 | 104.07.06.17-1 | Spring |
| 28 | 8118 | Bearing |
| 29 | 104.07.06.18 | Spring seat |
| 30 | 104.07.06.19 | Drain plug |
| 31 | 104.07.06.20 | Clutch body |
| 32 | D4-4-66-175×8.6 | O-ring |
| 33 | D4-4-66-180×3.1 | O-ring |
| 34 | 104.07.06.21 | Shuck |
| 35 | 104.07.06.22 | Piston |
| 36 | D4-4-66-110×5.7 | O-ring |
| 37 | 104.07.06.23 | Cover |
| 38 | Gb893.1-87-90 | Snap ring |
| 39 | 32510 | Bearing |
| 40 | 104.07.06.24 | Gear shaft |
| 41 | GB5783-86-M12×30 | Bolt |
| 42 | 104.07.06.25-12n6×32 | Pin |
| 43 | 104.07.06.26 | Shim |
| 44 | GB1096-79-14×28 | Flat key |
| 45 | C6-3-92 (60) | Shaft and Plate |
| 46 | GB32.1-88-M8×16 | Bolt |
| 47 | Ф1×100 | Iron wire |
| 48 | GB70-85-M12×25 | Screw |
| 49 | GB93-87-12 | Washer |
| 50 | GB1096-79-14×36 | Flat key |
| 51 | 104.07.06.27 | Gear |
| 52 | 104.07.06.28 | Circle nu |
| 53 | GB858-88-48 | Washer |
| 54 | GB893.1-86-72 | Snap ring |
| 55 | 32207 | Bearing |
| 56 | 104.07.02.03 | Pipe |
| 57 | GB898-88-M12×30 | Stud |
| 58 | GB6170-86-M12 | Nu |
| 59 | GB5781-86-M12×10 | Bolt |
| 60 | QDHF-01 | Pneumatic commutator |
| 3. Packing assembly | ||
| No. | Drawing No. | Denomination |
| 104.05.30.00 | Packing, assembly | |
| 1 | 104.05.30.07 | Nut, upper packing gland |
| 2 | 104.05.30.01-1 | Housing, packing gland (upper) |
| 3 | 104.05.30.02-1 | Spacer, top packing |
| 4 | D4-4-66-135×5.7 | O-ring |
| 5 | 104.05.30.08 | Packing |
| 6 | 104.05.30.09 | Spacer, top |
| 7 | 104.05.30.03 | Wash pipe |
| 8 | 104.05.30.04-1 | Snap ring |
| 9 | 104.05.30.10 | Spacer, lower |
| 10 | 104.05.30.05-1 | Spacer |
| 11 | GB1152-89-M10×1 | Grease fitting |
| 12 | 104.05.30.06-1 | Housing, packing gland (lower) |
| 13 | 104.05.30.11 | Spacer, middle |
| 14 | 104.05.30.12 | Spacer, bottom packing |
| 15 | D4-4-66-120×5.7 | O-ring O |
| 16 | GB75-66-M10×12 | Screw |
| 17 | 104.05.30.13 | Nut, lower packing gland |
Swivelparts6
Posted in InventoryList.