| LANZHOU LS-NATIONAL OIL WELL PETROLEUM ENGINEERING CO. LTD TRAVELLING BLOCK | |
| LANZHOU LSNOI TRAVELLING BLOCK YG450, YG350, YC315, YC250,YC225, YC180, YG90 PARTS LIST | |
| YG135 TRAVELLING BLOCK PARTS LIST | |
| DESCRIPTION | PN |
| Hook blocks | 109.01.00-1 |
| Guard instalItion | 109.01.50.00 |
| Bolt | GB5781-86 (Ml 6×40) |
| Washer ,spring | GB93-87 (16) |
| Washer ,spring | |
| Pin | GB882-86 (10×45) |
| Pin | 109.01.36 |
| Link | 109.01.35 |
| Pin | 109.01.34 |
| Plate ident | 109.01.40-1 |
| Screw | GB66-76 (M4x8) |
| Plate .fixed | 109.01.25 |
| Barrel pin | 109.01.24 |
| Support Plate | 109.01.45.00 |
| Screw | GB70-85 (Ml 6×35) |
| Washer .spring | |
| Grease fitting | GB1152-89 (Ml 0x1) |
| Grease fitting | |
| Body | 109.01.14 |
| Screw | GB70-85 (M8x30) |
| Washer .spring | GB93-87 (8) |
| Nut | 109.01.29 |
| Screw | GB70-85 (Ml 6×45) |
| Link lock | 109.01.26 |
| Rotating ring | 109.01.37 |
| Roller ring | 109.01.27 |
| Plug | 109.01.10 |
| Steel ball | GB308-64 (4>18) |
| Steel ball | |
| Steel ball | |
| Right plate ass) | 109.01.40.00-1 |
| Pin | GB91-86 (8×100) |
| Pin | |
| Pin | |
| Nut | 109.01.33 |
| Bearing | 37836K |
| Bearing | |
| Adjusting shim | 109.01.22 |
| Adjusting shim | 109.01.23 |
| Gap pin | 109.01.01 |
| Cap | 109.01.39 |
| Hook blocks | 109.01.00-1 |
| Nut | 109.01.02 |
| Guard pin,hinge | 109.01.03 |
| Plug | 102.12.04 |
| Sheave | 109.01.42C4>29)/109.01.43(<t26) |
| Sheave | |
| Reating bearing | 101.15.03 |
| Reating bearing | |
| Shaft | 109.01.05 |
| Nut | 109.01.06 |
| Plate .fixed | 109.01.07 |
| Left side plate assy | 109.01.15.00-1 |
| Snubber assembly | 109.01.20.00 |
| Barrel | 109.01.41-1 |
| Spring | 109.01.08 |
| Shank | 109.01.12 |
| Support spring | 109.01.11 |
| Lock assembly | 109.01.30.00 |
| Bearing | 8248 |
| Roller assembly | 109.01.35.00 |
| Pinshaft | 109.01.13 |
| Plug | 109.01.38 |
| Shank pin | 109.01.15 |
| Nut | 109.01.16 |
| Pin | GB91-86 (8×120) |
| Pinshaft | 109.01.18 |
| Latch, tongue | 109.01.17 |
| Plunger .tongue latch | 109.01.19 |
| Spring | 109.01.20 |
| Arm, lower locking | 109.01.31 |
| Pinshaft | 109.01.21 |
| Pin | GB91-86 (3×16) |
| Pin | 109.01.28 |
| Plate .fixed | 109.01.30 |
| Pin | GB91-86 (6×80) |
| Grease fitting seat | |
| Counterweight | 109.01.04 |
| Screw | GB5781-86(M16x35) |
| Rod .operating | 103K. 04.10.00 |
| Hook blocks | 109.01.00-1 |
| Snubber assembly | 109.01.20.00 |
| Link assy | 109.01.25.00 |
| Discharge valve | 109.01.21.00 |
| Screw | JB1000-77 (M22x1.5) |
| Plate, end | 109.01.20.01 |
| Sea 1, o i1 | D7-1-67 (75x100x12) |
| Screw | GB70-85 (M8x16) |
| Washer ,spring | GB93-87 (8) |
| Plug | 109.01.20.02 |
| Screw | GB70-85 (M20x65) |
| Washer , spr i ng | GB93-87 (20) |
| Hydraulic cylinder | 109.01.28.00 |
| Link | 109.01.20.03 |
| Screw with head-holes | GB32.1-88 |
| Wire | 4*1.5 |
| Plate, end | 109.01.20.04 |
| Lock assembly | 109.01.30.00 |
| Grease fitting | GB1152-89 (Ml 0x1) |
| Link assy | 109.01.30.01 |
| Steel ball | GB308-64 (3/8″) |
| Lock bush | 109.01.30.02 |
| Plug | 109.01.30.03 |
| Spring | 109.01.30.04 |
| Pin | 109.01.30.05 |
| Pin shaft | 109.01.30.06 |
| YG90 TRAVELLING BLOCK PARTS LIST | |
| DESCRIPTION | PN |
| Hook blocks | 109.03.00-1 |
| Guard instalItion | 109.03.10.00 |
| Bolt | GB5781-86 (Ml 2×40) |
| Washer ,spring | |
| Washer ,spring | GB93-87 (12) |
| Pin | GB882-86 (10×50) |
| Pin | 109.03.29 |
| Link | 109.03.01 |
| Pin | 109.03.14 |
| Plate ident | 109.03.3H |
| Screw | GB66-76 (M4x8) |
| Plate .fixed | 109.01.25 |
| Barrel pin | 109.03.03 |
| Support Plate | 109.03.15.00 |
| Screw | GB70-85 (Ml 6×30) |
| Washer .spring | GB93-87 (16) |
| Grease fitting | GB1152-89 (Ml 0x1) |
| Grease fitting | |
| Body | 109.03.04 |
| Screw | GB70-85 (M8x30) |
| Washer .spring | GB93-87 (8) |
| Nut | 109.03.05 |
| Screw | GB70-85 (Ml 2×45) |
| Link lock | 109.03.06 |
| Rotating ring | 109.03.07 |
| Roller ring | 109.03.08 |
| Plug | 109.03.09 |
| Steel ball | |
| Steel ball | |
| Steel ball | GB308-64 (4>15) |
| Right plate ass) | 109.03.20.00-1 |
| Pin | |
| Pin | GB91-86 (6×100) |
| Pin | |
| Nut | 109.03.10 |
| Bearing | 37830K |
| Bearing | |
| Adjusting shim | 109.03.11 |
| Adjusting shim | 109.03.12 |
| Gap pin | 109.03.13 |
| Cap | 109.03.34 |
| Hook blocks | 109.03.00-1 |
| Nut | 109.01.02 |
| Guard pin,hinge | 109.03.15 |
| Plug | 102.12.04 |
| Sheave | 109.03.33-1 (4)26) |
| Sheave | |
| Reating bearing | 109.03.17 |
| Reating bearing | |
| Shaft | 109.03.18 |
| Nut | 109.03.19 |
| Plate .fixed | 109.01.07 |
| Left side plate assy | 109.03.30.00-1 |
| Snubber assembly | 109.03.35.00 |
| Barrel | 109.03.32-1 |
| Spring | 109.03.21 |
| Shank | 109.03.22 |
| Support spring | 109.03.23 |
| Lock assembly | 109.01.30.00 |
| Bearing | 8238 |
| Roller assembly | 109.01.35.00 |
| Pinshaft | 109.04.22 |
| Plug | 109.04.21 |
| Shank pin | 109.03.25 |
| Nut | 109.03.26 |
| Pin | GB91-86 (8×100) |
| Pinshaft | 109.01.18 |
| Latch, tongue | 109.01.17 |
| Plunger .tongue latch | 109.03.24 |
| Spring | 109.01.20 |
| Arm, lower locking | 109.03.27 |
| Pinshaft | 109.03.28 |
| Pin | GB91-86 (3×16) |
| Pin | 109.03.30 |
| Plate .fixed | 109.01.30 |
| Pin | |
| Grease fitting seat | |
| Counterweight | |
| Screw | |
| Rod .operating | 103K.04.10.00 |
| Hook blocks | 109.03.00-1 |
| Snubber assembly | 109.03.35.00 |
| Link assy | 109.03.36.00 |
| Discharge valve | 109.01.21.00 |
| Screw | JB1000-77 (M22x1.5) |
| Plate, end | 109.03.35.01 |
| Sea 1, o i1 | D7-1-67 (50x75x10) |
| Screw | GB70-85 (M8x16) |
| Washer ,spring | GB93-87 (8) |
| Plug | 109.01.20.02 |
| Screw | GB70-85 (Ml 6×60) |
| Washer , spr i ng | GB93-87 (16) |
| Hydraulic cylinder | 109.03.37.00 |
| Link | 109.03.35.02 |
| Screw with head-holes | 109.03.35.03 |
| Wire | 4*1.5 |
| Plate, end | 109.01.20.04 |
| Lock assembly | 109.01.30.00 |
| Grease fitting | GB1152-89 (Ml 0x1) |
| Link assy | 109.01.30.01 |
| Steel ball | GB308-64 (3/8″) |
| Lock bush | 109.01.30.02 |
| Plug | 109.01.30.03 |
| Spring | 109.01.30.04 |
| Pin | 109.01.30.05 |
| Pin shaft | 109.01.30.06 |
| YG170 TRAVELLING BLOCK PARTS LIST | |
| DESCRIPTION | PN |
| Hook blocks | 109.04.00-2 |
| Guard instalItion | 109.04.20.00 |
| Bolt | GB5781-86 (Ml 6×40) |
| Washer ,spring | GB93-87 (16) |
| Washer ,spring | |
| Pin | GB882-86 (10×45) |
| Pin | 109.01.36 |
| Link | 109.04.19 |
| Pin | 109.01.34 |
| Plate ident | 109.04.25-1 |
| Screw | GB66-76 (M4x8) |
| Plate .fixed | 109.04.10 |
| Barrel pin | 109.04.11 |
| Support Plate | |
| Screw | GB70-85 (Ml 6×40) |
| Washer .spring | |
| Grease fitting | |
| Grease fitting | GB1152-89 (Ml 0x1) |
| Body | 109.04.07 |
| Screw | GB70-85 (M8x30) |
| Washer .spring | GB93-87 (8) |
| Nut | 109.04.18 |
| Screw | GB70-85 (Ml 6×45) |
| Link lock | 109.04.06 |
| Rotating ring | 109.04.04 |
| Roller ring | 109.04.05 |
| Plug | 109.01.10 |
| Steel ball | |
| Steel ball | GB308-64 (4>18) |
| Steel ball | |
| Right plate ass) | 109.04.10.00-1 |
| Pin | |
| Pin | |
| Pin | GB91-86 (8×120) |
| Nut | 109.04.12 |
| Bearing | |
| Bearing | 37941K |
| Adjusting shim | 102.13.07 |
| Adjusting shim | 102.13.08 |
| Gap pin | 102.13.03 |
| Cap | 109.04.17 |
| Hook blocks | 109.04.00-2 |
| Nut | 102.13.02 |
| Guard pin,hinge | 102.13.04 |
| Plug | 102.12.04 |
| Sheave | |
| Sheave | t04.14-1(M)/1128(«) |
| Reating bearing | |
| Reating bearing | 101.04.03 |
| Shaft | 102.17.01 |
| Nut | 102.13.09 |
| Plate .fixed | 102.13.10 |
| Left side plate assy | 109.04.30.00-1 |
| Snubber assembly | 109.04.40.00 |
| Barrel | 109.04.26-1 |
| Spring | 109.04.02 |
| Shank | 109.04.09 |
| Support spring | 109.04.03 |
| Lock assembly | 109.01.30.00 |
| Bearing | 8256 |
| Roller assembly | 109.01.35.00 |
| Pinshaft | 109.04.22 |
| Plug | 109.04.21 |
| Shank pin | 109.04.08 |
| Nut | 109.01.16 |
| Pin | |
| Pinshaft | 109.01.18 |
| Latch, tongue | 109.01.17 |
| Plunger .tongue latch | 109.01.19 |
| Spring | 109.01.20 |
| Arm, lower locking | 109.04.16 |
| Pinshaft | 109.01.21 |
| Pin | GB91-86 (3.2×16) |
| Pin | 109.04.20 |
| Plate .fixed | 109.01.30 |
| Pin | GB91-86 (8×80) |
| Grease fitting seat | 102.10.17 |
| Counterweight | 109.04.15 |
| Screw | GB5781-86 (Ml 6×35) |
| Rod .operating | 103K.04.10.00 |
| Hook blocks | 109.04.00-2 |
| Snubber assembly | 109.04.40.00 |
| Link assy | 109.03.36.00 |
| Discharge valve | 109.01.21.00 |
| Screw | JB1000-77 (M22x1.5) |
| Plate, end | 109.03.35.01 |
| Sea 1, o i1 | D7-1-67 (50x75x10) |
| Screw | GB70-85 (M8x16) |
| Washer ,spring | GB93-87 (8) |
| Plug | 109.01.20.02 |
| Screw | GB70-85 (Ml 6×60) |
| Washer , spr i ng | GB93-87 (16) |
| Hydraulic cylinder | 109.03.37.00 |
| Link | 109.03.35.02 |
| Screw with head-holes | 109.03.35.03 |
| Wire | 4*1.5 |
| Plate, end | 109.01.20.04 |
| Lock assembly | 109.01.30.00 |
| Grease fitting | GB1152-89 (Ml 0x1) |
| Link assy | 109.01.30.01 |
| Steel ball | GB308-64 (3/8″) |
| Lock bush | 109.01.30.02 |
| Plug | 109.01.30.03 |
| Spring | 109.01.30.04 |
| Pin | 109.01.30.05 |
| Pin shaft | 109.01.30.06 |
| YG450 TRAVELLING BLOCK PARTS LIST | |
| DESCRIPTION | PN |
| Hook blocks | 109.02.00 |
| Nut | 103.04.09 |
| Screw, hex soc. hd | GB70-85 (Ml 2×25) |
| Washer,spring | GB93-87 (12) |
| Pin shaft | 103.04.12 |
| Guard instalItion | 109.02.10.00 |
| Low guard | 109.02.01 |
| Screw, | GB5783-86 (M20x50) |
| Washer,spring | GB93-87(20) |
| Crosshead | 109.02.02-1 |
| Crosshead pin key | 109.02.03 |
| Screw, hex soc. hd | GB70-85 (M24x50) |
| Washer,spring | GB93-87 (24) |
| Crosshead pin | 109.02.04-1 |
| Shank assy | 109.02.20.00 |
| Screw with head-holes | GB32.1-88 (M16x45) |
| Wire | <1)1.5 |
| Retainer, seal | 103.04.04 |
| Sea 1,o i1 | D7-1-67 (180x220x15) |
| Positioner | 103.04.05 |
| Spring, positioner | 103.04.06 |
| Bushing, barrel(upper) | 103.04.07 |
| Barrel | 109.02.05 |
| Barrel (upper) | 103.04.38 |
| 0-Ring | 103.04.15 |
| Barrel (lower) | 103.07.04 |
| Shank spring-inner | 103.04.13 |
| Shank spring-outer | 103.04.14 |
| Hook blocks | 109.02.00 |
| Bushing, barrel(lower) | 103.04.16 |
| Support,spring | 103.04.17 |
| Lock assembly | 103.04.01.00 |
| Latch, tongue | 103.04.19 |
| Plunger,tongue latch | 103.04.20 |
| Spring tongue latch | 103.04.21 |
| Arm, lower locking | 103.04.22 |
| Body | 103.06.02 |
| Plate,fixed | 103.04.27 |
| Pin, 1 ink(lower) | 103.04.42-1 |
| Link | 103.04.29 |
| Pin | 103.04.30 |
| Lock ring | 103.04.31 |
| Ring, stop | 103.04.32 |
| Bear i ng | 7549436 |
| Plug | 103.04.34 |
| Key,lock | 103.04.25 |
| Grease fitting | GB1152-89 (Ml 0x1) |
| Side plate bushing | 109.02.08 |
| Right plate assy | 109.02.40.00 |
| Sheave | 109.02.10 {<b 35)/102.19.02 (<t» 38) |
| Adjusting shim | 102.12.10 |
| Adjusting shim | 102.12.11 |
| Shaft key | 102.12.12 |
| Screw | GB70-85 (Ml 6×40) |
| Washer,spring | GB93-87 (16) |
| Nut | 101.02.01 |
| Hook blocks | 109.02.00 |
| Grease fitting seat | 102.10.17 |
| Sheave shaft | 109.02.09 |
| Reating.bearing | 102.12.08 |
| Bearing | 37951K |
| Counterweight | 109.02.11 |
| Bolt | GB5781-86 (M16x35) |
| Guard hinge pin | 109.02.12 |
| Plug | 102.12.04 |
| Tie rod | 109.02.13 |
| Nut | 102.12.02 |
| Pin cotter | GB91-86 (10×120) |
| Cap | 109.02.14 |
| Screw | GB68-85 (M6x30) |
| Plate name | 109.02.07 |
| Plate ident | 109.02.06-1 |
| Screw | GB67-85 (M4x8) |
| Left side plate assy | 109.02.30.00 |
| Plate | 103.04.18 |
| Tongue Pin | 103.04.23 |
| Rod, operating | 103K.04.10.00 |
| Guard instalItion | 109.02.10.00 |
| Bushing | 102.12.15.01 |
| Hook blocks | 109.02.00 |
| Plate | 109.02.10.01 |
| Plate | 109.02.10.02 |
| Shank assy | 109.02.20.00 |
| Shank | 109.02.20.01-1 |
| Nut | 103.04.05.02 |
| Bush i ng | 109.02.20.02-1 |
| Lock assembly | 103.04.01.00 |
| 0-Ring | D4-4-66 (28×3.5) |
| Hous i ng | 103.04.01.05 |
| 0-Ring | D -4-664(100×5.7) |
| Spring, latch | 103.04.01.06 |
| Spring, pawl | 103.04.04.07 |
| 0-Ring | D4-4-66 (90×5.7) |
| Shaft, pawl | 103.04.03.00 |
| Lever | 103.04.02.01 |
| Shaft | 103.04.03.01 |
| Lock block | 103.04.03.02 |
| Pin | 103.04.03.03 |
| Shaft,latch | 103.04.02.00 |
| Lever | 103.04.02.01 |
| Shaft | 103.04.02.02 |
| Latch | 103.04.02.03 |
| Pin | 103.04.02.04 |
Travellingblockparts4
Posted in InventoryList.