Commandment of technical updates for the “Turkmenistan” state concert, which came into force in 2025 | ||||
No./p | Product name | Brand and GOST of the product | Unit of measurement | Quantity |
1 | 2 | 3 | 4 | 5 |
LOT #2 | ||||
Main drilling, power and technological equipment | ||||
1 | Drilling pump “F-1300” (China) | AH130101.00 | pcs | 4 |
2 | Drilling pump “F-1300” with diesel drive “WEICHAY” with a capacity of more than 1000 hp with a reduction gear 1.53 and a clutch LT-600-250 with a transmission belt, installation supervision (China) | k-t | 6 | |
3 | F-1600 drilling pump for ZJ-70 DB rig (BOMCO 2015) (China) | k-t | 4 | |
4 | F-1600 drilling pump with electric motor on frame for ZJ-70 DS installation, installation supervision (2002) (China) | k-t | 4 | |
5 | Drilling pump 3NB-1300F with diesel drive “WEICHAY” with the capacity of more than 1000 hp with reduction gear 1.53 and coupling LT-600-250 with transmission belt, installation supervision (China) | k-t | 4 | |
6 | Manifold of drilling pump “ZG-100×35-S” 35 MPa (ground type with manual drive with thread FIG-1003 (China) for drilling rig URALMASH-3D-76 | BC080112-5000 | k-t | 15 |
7 | Manifold of drilling pump MBU-2U or similar | k-t | 2 | |
8 | Circulation system ZYG-200m3 (capacity -240m3/hour, productivity -200m3/hour) (China) | k-t | 8 | |
9 | Swivel SL-450-5 (China) | 104.16.00 | k-t | 10 |
10 | Swivel XSL-225 (China) | XSL-225 | k-t | 3 |
11 | Auxiliary air winch (China) | XJFH5/35 | k-t | 6 |
12 | Winch LBU-1200 or similar | 4062.90.100 | k-t | 5 |
13 | Winch JC-70 DS (for installation ZJ-70DS 2002), installation supervision (China) | JC-70DS | k-t | 2 |
14 | Diesel engine “G12V190PZL1”, installation supervision (China) | «G12V190PZL1» | k-t | 8 |
15 | Diesel CO 1000F/30 (ser 190) (G12V190PZL) | pcs | 4 | |
16 | Diesel engine “SAT C-15” (oil), installation supervision (USA) | MCW1-Up | pcs | 2 |
17 | Diesel “SAT-3512V” RTM with a radiator core with a seal (4 cores with a seal 1 set) | k-t | 4 | |
18 | Doosan diesel engine for drilling rig drive (PU222TI588KW(800PS)/2100RPM) (South Korea) | k-t | 65 | |
Technical parameters and configuration for 1 (one) set of Doosan diesel engine: | ||||
18.1 | Power 588 (800)/2100(kw(ps)/rpm) | |||
18.2 | V12 cylinder four stroke diesel engine | |||
18.3 | Speed 1500 rpm. Displacement 21.927 | |||
18.4 | Engine with fan and radiator. Radiator for cooling will be supplied for each engine separately | |||
18.5 | SAE1 housing | |||
18.6 | Flywheel 14″ | |||
18.7 | Oil and fuel filter. Will be installed in every engine | |||
18.8 | Flexible exhaust pipe (for connection to mufflers). Will be supplied for each engine in individual packaging. | |||
18.9 | Fuel lift pump. Installed in every engine. | |||
18.10 | Starter 24V/7kW. Will be installed in each engine | |||
18.11 | Generator 24V/45A. Will be installed in each engine | |||
18.12 | Bosch high pressure fuel pump. Will be installed in every engine | |||
18.13 | Variable speed controller. Will be installed in each engine. | |||
18.14 | Electric control panel. Will be supplied in individual packaging for each engine. | |||
18.15 | Two silencers with spark arrestors, including mounting parts (counter flanges, seals, bolts and nuts). Will be supplied for each engine in individual packaging. | |||
18.16 | Additional coarse fuel filter. Will be supplied for each engine in individual packaging. | |||
18.17 | Hand pump for pumping out oil when changing it. Will be supplied for every 3 engine sets, 1 piece. | |||
18.18 | Vibration dampers (shock absorbers). 6 pieces will be supplied for each engine kit. | |||
18.19 | Coupling assembly (coupling, shaft, intermediate plate (flange) and other fastening devices). RM5000 Chinese version with the appropriate dimensions for the customer and for each 1 engine, 1 piece. | k-t | 65 | |
18.20 | Operation manual for every 5 diesel sets – 1 manual. In English and Russian | |||
Additional spare parts for diesel engine “DOOSAN PU 222 TI” | ||||
18.21 | Oil filter 65.05510-5020V (2 pcs in a set) | k-t | 65 | |
18.22 | Fuel filter 65.12503-5016B or 65.12503-5019 (2 pcs in a set) | k-t | 65 | |
18.23 | Motor oil, Antifreeze and battery by volume and quantity | |||
18.24 | Air filter 65.08304-6005 (2 pcs in a set) | k-t | 65 | |
19 | Diesel Generator 300KWawith engine “Doosan Korea” in a closed container, with a filter for 1 year (Korea) | pcs | 20 | |
20 | Rotor ZP-275, with sprocket Z=23 (China) | ZP 000000 AG275000100-SM | pcs | 10 |
21 | Rotor ZP-375 (China) | 105.08.00 | pcs | 8 |
22 | Rotor P-700, with sprocket Z=19 or similar | 14016.45.000-01 | pcs | 10 |
23 | Air compressor “Sullair” with electric motor (China) | LS 12-50HHAC | k-t | 3 |
24 | Air compressor 4VU1-5/9 M4UHL4 or similar | GOST 2405-88 14040.70.150 | k-t | 11 |
25 | Compressor station VU1-5/9 M4UKHL4 or similar | 4062.70.600 | k-t | 4 |
26 | Air compressor, piston P=1.0 MPa (China) | pcs | 12 | |
27 | Degasser ZGQ 1/4 (China) | TU39-01-08-677-81 | pcs | 20 |
28 | Degasser “Cascade-40” or equivalent | pcs | 5 | |
29 | Transmission box “Allison-S5610H” (China or USA) | 29537462 | pcs | 2 |
30 | Transmission box “Allison-S5620AR” (China or USA) | 29537301 | pcs | 2 |
31 | Gearbox ZPCDX-00 for rotor drive ZP-275 “XJ-750” | Kerui Group | pcs | 2 |
32 | FKQ-8000-6 control station with flexible hydraulic lines (China) | pcs | 8 | |
33 | Control station СН6U-76 “Upetrom” 2-battery (Romania) | 430-32.00.00.00.0 | pcs | 2 |
34 | Pipe threading machine with extended bed 1N983. 16 kW or similar | GOST 631-79 | k-t | 3 |
35 | Screw-cutting lathe | 16K40 | k-t | 1 |
36 | Vertical drilling machine | 2N135 | k-t | 1 |
37 | Heavy-duty tracked vehicle TGP-70 or similar | TGP-70.02.01.000 | pcs | 30 |
38 | Transport trolley TP-35 or similar | TP-35.00.000 | pcs | 10 |
39 | Crane KPB-3M or equivalent | GOST 22584-77 | k-t | 15 |
40 | Rotary drilling crane, capacity 5t, height L=.6m (China) | k-t | 3 | |
41 | Vibrating sieve S250-1 (China) | k-t | 6 | |
42 | Vibrating sieve S250-2 (China) | pcs | 12 | |
43 | Clay mixer NJ-4m3 single-shaft (China) | k-t | 12 | |
44 | Travelling block YC-225 (China) | pcs | 4 | |
45 | Hook DG-225 (China) | pcs | 4 | |
46 | Vertical Slurry Pump (China) | 100YZS 150-700 | pcs | 10 |
Spare parts for JC70D drilling winch for ZJ70DS drilling rig (2002) (lot indivisible) | ||||
47 | Auxiliary Winch Brake Control System JC-70D (China) | k-t | 1 | |
48 | Electromagnetic brake (hydromat) for winch JС-70DS (2002) (China) | FC 020000 | k-t | 9 |
49 | Electrodynamic brake disc JC-70D (China) | P.S. 060000 | pcs | 2 |
50 | Surge arrester valve M12x1.5 | pcs | 1 | |
51 | Relief valve (3/4NPT) | pcs | 1 | |
52 | Main drive shaft assembly | 106.16.37.00 | k-t | 2 |
53 | Intermediate shaft assembly | 106.16.40.00 (106.23.40.00) | k-t | 2 |
54 | Friction reel for winch | JC-70 | pcs | 2 |
55 | Gear oil pump for lubrication of winch SВ100 | ZX09 | pcs | 24 |
56 | Oil pump chain for power unit drive | pcs | 2 | |
57 | 2-way valve of the driller’s control panel | pcs | 20 | |
58 | Drive chain, roller, 10 meters | 32S-2x | pcs | 5 |
59 | Drive chain, roller, 10 meters | 32S-4x | pcs | 5 |
60 | Drive chain, roller, 10 meters | 24S-6x | pcs | 5 |
61 | Drive chain, roller, 10 meters | 24S-3x | pcs | 5 |
62 | Brake band JC-70DS | pcs | 4 | |
Spare parts for drilling winch JC70DB for drilling rig ZJ70D (2010) ZJ70DB (2015) | ||||
63 | Water-cooled brake disc for winch JC-70D (2010) (BOMСO) | pcs | 12 | |
64 | Hydraulic pump of the brake system of the winch JC-70D (2010) | Rexroth D-72150 Horb 10V | pcs | 60 |
65 | Splined connection between electric motor and gearbox for winch JC-70DB | k-t | 9 | |
66 | Splined connection between electric motor and gearbox for rotor ZP-375 | k-t | 5 | |
67 | Splined connection between electric motor and pulley for F-1600 pump | k-t | 9 | |
68 | Toothed oil pump | YB040013 | pcs | 6 |
69 | Axial piston pump JGBOY-BL | YB040013 | pcs | 15 |
70 | Chain wheel Z=34, P=38.1 3-row | ZZ070004 | pcs | 2 |
71 | Brake disc for winch JC-70DB (2015) without water cooling | pcs | 20 | |
72 | Pneumatic compensators for the control panel of the hydraulic pump of the brake system with valves for the ZJ-70DV installation for the JC-70DV winch (2015) | pcs | 60 | |
73 | Brake slave cylinder (caliper) for winch JC 70 DB | PS010000 | pcs | 50 |
74 | Safety brake cylinder (support) for winch JC 70 DB | PS020000 | pcs | 40 |
75 | Explosion-proof oil pump unit LWBZ-200 | JC110100 | pcs | 6 |
76 | Brake band | ZQ050100 | pcs | 6 |
77 | Ballonet | ZQ030025 | pcs | 2 |
78 | Ballonet | ZQ030043 | pcs | 2 |
Top drive DQ 70BS-JH (2015) (lot is indivisible) | ||||
79 | Thrust tapered roller bearing | W0106234 max3 | pcs | 6 |
80 | Thrust tapered roller bearing | W0106292 | pcs | 9 |
81 | Cylindrical roller bearing(3520) | W0101100 | pcs | 22 |
82 | Spherical roller bearing (24122) | W0102110 | pcs | 25 |
83 | Cylindrical roller bearing | W0101220 | pcs | 14 |
84 | Cylindrical roller thrust bearing | W0103181 | pcs | 7 |
85 | Cylindrical roller thrust bearing | W0103260 | pcs | 14 |
86 | Cylindrical roller bearing | W0101180 | pcs | 14 |
87 | Rotary seal gland 180x210x15 | M09180 | pcs | 70 |
88 | Rotary seal gland 210x240x15 | M09210 | pcs | 100 |
89 | Seal of mud pipe 127×95 | NT75401030 810 | pcs | 650 |
90 | Central pipe 95×250 | NT754010308-VI | pcs | 70 |
91 | Flushing pipe assembly 35 mPa | NT7540103 08 | k-t | 28 |
92 | Sling 350 t | W03350108 | pcs | 5 |
93 | Pipe clamp jaw | T7540205081 | k-t | 9 |
94 | Carrier roller assembly | T7503153201 | pcs | 130 |
95 | Hydraulic pump unit YB015.537 | M2JA132 M6B B35 A37-FR-O1-H-SK | k-t | 6 |
96 | Hydraulic motor with gear | YBO3315+06 | k-t | 4 |
97 | Bell-shaped casing | YB0701 | pcs | 2 |
98 | Coupling | YB0801+A9 | k-t | 1 |
99 | Coupling | YB0803 | k-t | 2 |
100 | Skating rink | YB0703 | pcs | 2 |
101 | Lubrication motor complete with gear pump YB021.140 | M2JA90LM6A+HGP-3A-F40R | k-t | 6 |
102 | Return oil filter | YQ0203160100 | pcs | 20 |
103 | Return oil filter housing | YQ020316 01002 | pcs | 6 |
104 | Transmission oil filter | YQ0103160 | pcs | 52 |
105 | High pressure filter for hydraulic oil | YQ0102063 | pcs | 52 |
106 | First leading gear | 70010401 | pcs | 8 |
107 | Second drive gear assembly | 70010403 | k-t | 13 |
108 | Second driven gear | 700104013 | pcs | 11 |
109 | Small gear of the rotating adapter | T75020106 | pcs | 6 |
110 | Seal for main shaft (ø210х78) | T7540104082 | pcs | 28 |
111 | Seal for main shaft (ø210х164) | T7540104060 | pcs | 28 |
112 | Under the dense envelope – lower sealing sleeve (ø210×60) | 700104311 | pcs | 13 |
113 | Under the dense envelope – lower sealing sleeve (ø210×70) | 700104312 | pcs | 13 |
114 | Hydraulic cylinder for tilting the link assembly | DQ70BS-GZ-03 | k-t | 1 |
115 | Locking device assembly | DQ70BS-GZ-04 | k-t | 1 |
116 | Stopper die | T75020403 | pcs | 15 |
117 | IBOP Management | DQ70BS-GZ-06 | k-t | 2 |
118 | Plunger pump | YB05037 37cm3/r | pcs | 1 |
119 | Gear pump | HGP-3A-F30R-2B | pcs | 2 |
120 | Gear pump | HGP-3A-F40R | pcs | 2 |
121 | Ball bearing 480x380x46 | W0104380 | pcs | 6 |
122 | Hydraulic auxiliary system valve block | YFT754BOOO | pcs | 4 |
123 | Mud hose with thread 4”x35mPa -23m FIG-1003 | 20130613006 | pcs | 4 |
Spare parts for drilling pump F-1300, F-1600 (lot indivisible) | ||||
124 | Cylinder bushing ø130 mm | AH000003031200 | pcs | 150 |
125 | Cylinder bushing ø140 mm | AH000003031300 | pcs | 150 |
126 | Cylinder bushing ø150 mm | AH000003031400 | pcs | 450 |
127 | Cylinder bushing ø160 mm | AH000003031500 | pcs | 450 |
128 | Cylinder bushing ø170 mm | AH000003031600 | pcs | 350 |
129 | Cylinder bushing ø180 mm | AH000003031700 | pcs | 350 |
130 | Piston polyurethane ø130 mm | AH 0000040300 | pcs | 225 |
131 | Piston polyurethane ø140 mm | AH 0000040500 | pcs | 225 |
132 | Piston polyurethane ø150 mm | AH 0000040600 | pcs | 675 |
133 | Piston polyurethane ø160 mm | AH 0000040700 | pcs | 675 |
134 | Piston polyurethane ø170 mm | AH 0000040800 | pcs | 525 |
135 | Piston polyurethane ø180 mm | AH 0000040900 | pcs | 525 |
136 | Runner rod | AH 1301010516 107.11.01.02 | pcs | 30 |
137 | Valve body | 107.11.140.00 | pcs | 2500 |
138 | Valve seat | 107.11.140.04 | pcs | 2000 |
139 | Valve rubber polyurethane (plate) | pcs | 3000 | |
140 | Valve holder (upper) | AH 36001-05A04.00 | pcs | 250 |
141 | Valve holder (lower) | AH 130101050 500 | pcs | 250 |
142 | Bronze insert valve holder upper | pcs | 1000 | |
143 | Crosshead rod seal | F-1300, F-1600 | pcs | 200 |
144 | Crosshead lining | RS 11309.04.012 | pcs | 10 |
145 | Crosshead bearing | RS 11309.04.015 | pcs | 50 |
146 | Diaphragm of pneumatic compensator KW-75 | AK 75350100 | pcs | 30 |
147 | AVB coupling cylinder 600×250 semicircular shape | W190C300A9 | pcs | 20 |
148 | Cylinder block 600×250 (overlay) | pcs | 50 | |
149 | Hydraulic Cylinder Assembly (F-1600) | AH130102050100 | pcs | 25 |
150 | Piston rod with clamp assembly | 107.11.110.39 NB050015 | k-t | 60 |
151 | Half-rod seal | 107.11.96.00 | pcs | 20 |
152 | Cylinder Liner Seal (F-1600) | 107,11,110.42 | pcs | 300 |
153 | Valve Cover Seal (F-1600) | 107,11,330.00 | pcs | 300 |
154 | Hydraulic cover seal (front) polyurethane | pcs | 400 | |
155 | Pneumatic swivel QFS-15 | pcs | 30 | |
156 | Surge arrester KRJa-1.15 | pcs | 20 | |
157 | V-belt A3708 L=8000mm | HGT-2819 | k-t | 13 |
158 | Gear oil pump LWBZ-40/6 (50HZ) | BZ040100 | pcs | 20 |
159 | Clay solution gate valve (forging) | BZ080100 | pcs | 20 |
160 | V-shaped tubular filter VWU-100x180J | BZ040013 | pcs | 10 |
161 | Shear pin safety valve JA-3 (flanged) | NB110000 | pcs | 20 |
162 | Vibration-resistant pressure gauge 60 mPa, 8700 PSI (21/16-5000) | NB000032 | pcs | 10 |
163 | Valve spring (F-1300, F-1600) | NB050007 | pcs | 200 |
164 | Ferrule | AH1301010513 XC2013075 | pcs | 10 |
165 | Eccentric bearing NUP46477Q4/C9YA4 | NB020020 | k-t | 28 |
166 | Main Bearing 24060CA/CAW33 | NB02010021 | k-t | 22 |
167 | Bearing NU3044x3M/CA | NB030014 | k-t | 6 |
168 | Leading bearing | RS 11310.04.008 | pcs | 2 |
169 | Leading Bearing Box (Left) | RS 11310.01.005 | pcs | 1 |
170 | Leading bearing box (right) | RS 11310.01.001 | pcs | 1 |
171 | Bearing 4G312844H | RS 11309/03/012 | pcs | 2 |
172 | Bearing 32338 W33 transmission shaft (F-1300) | pcs | 6 | |
173 | Bearing 32848 W33 lower (F-1300/1600) | NU2148X3M/C9 | pcs | 9 |
Spare parts for drilling pump F-800, F-1000 (lot indivisible) | ||||
174 | Cylinder bushing ø 150 mm | pcs | 70 | |
175 | Cylinder bushing ø160 mm | pcs | 70 | |
176 | Cylinder bushing ø170 mm | pcs | 30 | |
177 | Piston ø150 mm | pcs | 105 | |
178 | Piston ø160 mm | pcs | 105 | |
179 | Piston ø170 mm | pcs | 45 | |
180 | Hydraulic cylinder assembly F-800,F-1000 | pcs | 12 | |
181 | F-1000 Crosshead Half Rod Seal | RS 11306.04.007 | pcs | 35 |
182 | Crosshead rod seal 4x5x0.5mm ass. | FR0801010414 | pcs | 35 |
183 | Crosshead ram rod F-800, F-1000 | pcs | 8 | |
184 | Valve seat | pcs | 200 | |
185 | Valve plate | pcs | 400 | |
186 | Rubber valve element | pcs | 150 | |
187 | Piston rod F-800, F-1000 | RS 11306.05.017 | pcs | 15 |
188 | Valve holder (upper) | RS 11.308.05.010 | pcs | 35 |
189 | Valve holder (lower) | RS 11308.05.026.01 | pcs | 35 |
190 | F-1000 Runner Rod Seal Holder Cover | RS 11308.05.04.003 | pcs | 12 |
191 | V-belt 5ZV25J-8000 mm F-800 | k-t | 8 | |
192 | V-belt 5ZV25J-8500 mm F-1000 | BZ000004 | k-t | 8 |
193 | Main bearing 3G3003748H (F-800/F-1000) | NB020023 | pcs | 2 |
194 | Eccentric bearing 928x508QU | (F-800/F-1000) | pcs | 2 |
195 | Transmission shaft bearing (F-800/F-1000) | NB030012 | pcs | 2 |
196 | Crosshead bearing (F-800/F-1000) | NB040021 | pcs | 2 |
197 | Lower bearing (F-800/F-1000) | pcs | 2 | |
Spare parts for drilling pump 3NB-1600 (lot indivisible) | ||||
198 | Nest | 107.11.140.04 | pcs | 100 |
199 | Valve | NB050400 | pcs | 200 |
200 | Valve rubber polyurethane (plate) | pcs | 300 | |
201 | Compensator | 3NB-1600 | pcs | 4 |
202 | Oil pump with electric motor | 3NB-1600 | pcs | 2 |
203 | Water pump with electric motor | 3NB-1600 | pcs | 2 |
204 | Valve holder (lower) | 3NB-1600 | pcs | 20 |
205 | Hydraulic cylinder | 3NB-1600 | pcs | 3 |
206 | Cylinder liner seal | 3NB-1600 | pcs | 40 |
207 | V-belt | 3NB-1600 | k-t | 2 |
208 | Half-rod seal | 107.11.96.00 | k-t | 20 |
209 | cylinder bushings f 140 mm. | 107.11.110.27 | pcs | 18 |
210 | cylinder bushings f 150 mm. | 107.11.110.28 | pcs | 24 |
211 | cylinder bushings f 160 mm. | pcs | 24 | |
212 | cylinder bushings f 170 mm. | pcs | 24 | |
213 | cylinder bushings f 180 mm. | pcs | 24 | |
214 | cylinder bushings f 190 mm. | pcs | 15 | |
215 | piston f 140 | 107.11.00 | pcs | 27 |
216 | piston f 150 | 107.11.00 | pcs | 36 |
217 | piston f 160 | 107.11.00 | pcs | 36 |
218 | piston f 170 | 107.11.00 | pcs | 36 |
219 | piston f 180 | 107.11.00 | pcs | 36 |
220 | piston f 190 | pcs | 22 | |
Spare parts for swivel SL-450-5 (lot indivisible) | ||||
221 | Main bearing 270x550x130 (19954EQ) | SL 000036 | pcs | 45 |
222 | Upper bearing 200x310x70 (2007140) GB/T-297 | SL 000031 | pcs | 35 |
223 | Lower bearing 240x360x56 (32148) GB/T-283 | SL 000039 | pcs | 35 |
224 | Mud pipe cuff | 104.05.30.08 | pcs | 1500 |
225 | Mud pipe assembly | 104.05.30.00 | k-t | 30 |
226 | Feeding tube | 104.05.30.03 | pcs | 300 |
227 | Spring O-ring (upper) PD220x260x18 mm | HG4-692-67 | pcs | 200 |
228 | Spring sealing ring (lower) PD250x290x18 mm | HG4-692-67 | pcs | 350 |
229 | Feeding tube sealing ring (upper) | 104.05.30.01-1 | pcs | 50 |
230 | Feeding tube sealing ring (lower) | 104.05.30.06-1 | pcs | 50 |
231 | Gasket – washer | 104.05.15-1 | pcs | 10 |
232 | Upper bushing for swivel SL-450 | AD 4500010506 | pcs | 80 |
233 | Bottom bushing for swivel SL-450 | AD 4500010508 | pcs | 100 |
Spare parts for swivel SL-225 (lot indivisible) | ||||
234 | Main bearing 9019456Q | SL 225-29.00 | pcs | 5 |
235 | Upper bearing 32040X2 (SL 000014) | GB/T-297-94 | pcs | 5 |
236 | Lower bearing NU240 (SL 000018) | GB/T283-2007 | pcs | 5 |
Spare parts for rotor ZP-375 (lot indivisible) | ||||
237 | Rotor drive shaft ZP-375 | k-t | 4 | |
238 | Input shaft assembly | ZP030000 | pcs | 4 |
239 | Seal SG180x210x15 | ZP030018 | pcs | 4 |
240 | Seal SG180x220x18 | SG180x220x18 | pcs | 8 |
241 | Seal PG150x180x16 | ZZ040234 | pcs | 8 |
242 | O-ring 1049.5×8.6 | ZP030005 | pcs | 8 |
243 | O-ring 407×8.6 | ZP050002 | pcs | 8 |
244 | Small umbrella gear | ZP030001 | pcs | 1 |
245 | Stainless steel wire ø1.6 | ZP000039 | meter | 10 |
246 | bearing NU2330M/C3 | ZP030019 | pcs | 5 |
247 | bearing 22330CA/C3W33 | ZP030020 | pcs | 5 |
248 | bearing 2687/1049 | ZP010009 | pcs | 5 |
Spare parts for rotor ZP-275 (lot indivisible) | ||||
249 | Rotor drive shaft ZP-275 Chain wheel P=50.8 Z=23 | k-t | 4 | |
250 | Chain wheel P=50.8 Z=21 | ZP000012 | pcs | 5 |
251 | Chain wheel P=50.8 Z=23 | pcs | 10 | |
252 | Chain wheel (sprocket) P=50.8 Z=25 | ZP00000 | pcs | 2 |
Spare parts for diesel engine “G12V190PZL1” (lot indivisible) | ||||
253 | Water cooling radiator | JC2112-1301-199-200 | pcs | 8 |
254 | Step-down gearbox 1.53, 900 kV, 1500-1 (1275x1085x980) | JS-1200 | pcs | 2 |
255 | Pneumatic starter (pneumatic motor) | 12VB.46.120F | pcs | 8 |
256 | Pneumatic fuel pre-supply pump | 12VB.54.00С | pcs | 2 |
257 | Pneumatically controlled valve “JDEC” G12V190PZL1″ | 12VB.46.300.10 | pcs | 4 |
258 | Oil controller bushing “JDEC” G12V190PZL1″ | Z12V.12.40.01 | pcs | 30 |
259 | Spring “JDEC” G12V190PZL1″ | Z12V.12.12.14A | pcs | 80 |
260 | Washer “JDEC” G12V190PZL1″ | Z12V.12.01A | pcs | 30 |
261 | Setting automatic brakes for low oil pressure | 12VB.34.00A | pcs | 2 |
262 | Fuel pump regulator “JDEC”G12V190PZL1” | T300/750Z | pcs | 2 |
263 | Tachometer with sensor “JDEC” G12V190PZL1″ | 12VB.32.00D | pcs | 3 |
264 | Water pump | 12VB.22.00V | pcs | 14 |
265 | Fuel pump | ВН6Z140ZP | pcs | 16 |
266 | Injector with sprayer assembly | 12 VВ.16.20E | k-t | 80 |
267 | Oil filter | 12 VB.18.10B | pcs | 800 |
268 | Fuel filter | 12 V.10.30.03 | pcs | 200 |
269 | Air filter (upper) | 12 V.36M.40 | pcs | 70 |
270 | Air filter (lower) | 12 V.36M.50 | pcs | 70 |
271 | Cardan clutch assembly | W51.5×870 | pcs | 1 |
272 | Turbocharger | J170-1 20GJ.00E | pcs | 16 |
273 | Cylinder head gasket (sealing ring II) | 12VB.03.12A | pcs | 35 |
274 | Fuel Pump Plunger Spring Clutch | Z12V.12.20 | pcs | 60 |
275 | Clutch plunger with fuel pump spring | Z12V.12.30 | pcs | 60 |
276 | Super Speed Safety Assembly | 12VB.37.00 | k-t | 2 |
277 | Plunger pair complete with spring | k-t | 48 | |
Drilling rig ZJ-30T. Spare parts for winch JS-30OC (lot indivisible) | ||||
278 | JC-30 winch lifting shaft | ZJ-30T | pcs | 2 |
279 | Auxiliary winch XJFH-5×35 | JC-30 | pcs | 1 |
280 | Combined transfer case for power system | DL 050000 | pcs | 1 |
281 | Oil pump assembly for the “Allison-S5610NR” gearbox | 6880125 | k-t | 4 |
282 | Hydraulic pump NS with power take-off assembly | ZJ-30T | k-t | 10 |
283 | Drive chain, roller 44.45 mm 10 meters | 28S-2 | k-t | 6 |
284 | Connecting cylinder W31-20-901DDW1057 410010020 90 | ZJ-30T,XJ-750 | pcs | 10 |
Spare parts for lifting unit XJ-750 (lot indivisible) | ||||
285 | Oil pump for the Allison-M5620R gearbox | 6880125 | pcs | 4 |
286 | XJ-750 Mast Lifting Hydraulic Cylinder | YGQB-262/1900 | pcs | 2 |
287 | Hydraulic pump “PARKER” PMD Çhemnitz Germany Part (НШ-XJ-750) | 7049112042 | pcs | 4 |
288 | Cardan shaft SС ВН-YMZG180С-1355 +60 21KN | JB/T5513-2006 | k-t | 2 |
289 | Cardan shaft SWC VN-YMZG180С-1370 +60 21KN | JB/T5513-2006 | k-t | 2 |
290 | Cardan shaft SС ВН-YMZG180С-1600 +60 21KN | JB/T5513-2006 | k-t | 2 |
291 | Cardan shaft SС ВН-YMZG180С-1755 +100 21KN | JB/T5513-2006 | k-t | 2 |
292 | Cardan shaft SС ВН-YMZG180С-18750 +60 21KN | JB/T5513-2006 | k-t | 2 |
293 | Cardan shaft cross fork of rotor drive | SWC 180 (21KN) | pcs | 10 |
294 | Winch lifting shaft JC-28/11 | XJ-750 | pcs | 2 |
Spare parts for the circulation system (lot indivisible) | ||||
295 | Double-leaf valve FD DN80 1.0 MPa | pcs | 50 | |
296 | Double-leaf valve FD DN100 1.0 MPa | pcs | 50 | |
297 | Double-leaf valve FD DN150 1.0 MPa | pcs | 55 | |
298 | Double-leaf valve FD DN200 1.0 MPa | pcs | 55 | |
299 | Double-leaf valve FD DN250 1.0 MPa | pcs | 55 | |
300 | Double-leaf valve FD DN300 1.0 MPa | pcs | 40 | |
301 | Soft rubber connection KHT-DN100 | pcs | 40 | |
302 | Soft rubber connection KHT-DN150 | BZ070023 | pcs | 100 |
303 | Soft rubber connection KHT-DN200 | BZ070024 | pcs | 100 |
304 | Soft rubber connection KHT-DN250 | pcs | 40 | |
305 | Soft rubber connection KHT-DN300 | pcs | 40 | |
306 | Seal of the drilling manifold connection ZG-100×35 mPa | GK 010022 | pcs | 50 |
307 | Stirrer HMG-80 with gearbox, without electric motor | GK 010100 | k-t | 5 |
308 | Mixing device 11 kW, without electric motor | JQ110000 | pcs. | 15 |
Spare parts for high pressure drilling manifold ZG 102-35 (lot indivisible) | ||||
309 | High pressure gate valve 2” x35 MPa FIG -1002 | JC 150000 | pcs | 35 |
310 | High pressure gate valve 3” x35 MPa FIG-1003 | JC 020000 | pcs | 30 |
311 | High pressure gate valve 4” x35 MPa FIG -1003 | JC 100000 | pcs | 80 |
312 | Drilling hose 4” x35 mPa FIG-1003, 17.5 meter FIG-1003 | pcs | 10 | |
313 | Drilling hose 4” x35 MPa FIG-1003, 19 meter FIG-1003 | pcs | 20 | |
314 | Drilling hose 4” x35 MPa FIG-1003, 23 meter FIG-1003 | pcs | 10 | |
315 | Ground sleeve 4″*35 MPa -5m FIG-1003 | GH0000019 | pcs | 20 |
Spare parts for the compressor “Sullair” (lot is indivisible) | ||||
316 | Oil filter | 02250054-605 | pcs | 80 |
317 | Water separating filter | 02250100-753 | pcs | 45 |
318 | Secondary filter | 02250100-754 | pcs | 25 |
319 | Air filter | 12P/N 049301 | pcs | 60 |
320 | Dehumidifier “SULLAIR” of air pneumatic system | QK000000»50N (37 kV) | pcs | 6 |
Spare parts for diesel engine “Doosan” PU 222TI (lot indivisible) | ||||
321 | Cylinder assembly “DOOSAN” PU222TI | 65.01201-0312C | pcs | 120 |
322 | Pipe loader “DOOSAN” | 65.09100-7052 | pcs | 40 |
323 | Pipe loader “DOOSAN” | 65.09100-7153 | pcs | 40 |
324 | Generator 24V | 65.26101-7153B | pcs | 40 |
325 | Starter 24V | 65.26201-7074 | pcs | 40 |
326 | Cylinder head gasket “DOOSAN” | 65.03901-0069 | pcs | 1000 |
327 | Water pump assembly | 65.06500-6148С | pcs | 80 |
328 | Shaft with bearing of water pump | 65.93410-0087 | pcs | 80 |
329 | Water pump mechanical seal | 65.06520-6007 | pcs | 80 |
330 | Fan belt (V-BELT) L=1425х9.5 | pcs | 100 | |
331 | Fan belt (V-BELT) L=1450х12,5 | pcs | 100 | |
332 | Fan belt L=1350×9.5 | pcs | 100 | |
333 | Alternator belt (V-BELT) L=1285х9.5 | pcs | 100 | |
334 | Alternator belt (V-BELT) L=1300х12.5 | pcs | 100 | |
335 | Oil filter element | 65.05510-5020B | pcs | 4500 |
336 | Fine fuel filter “DOOSAN” PU 222 TI | 65.12503-5016B | pcs | 800 |
337 | Oil radiator | 65.05601-7135 | pcs | 30 |
338 | Water radiator “DOOSAN” PU 222 TI | 440211-00193 | pcs | 15 |
339 | Water radiator “DOOSAN” PU 222 TI 060/TBA | 65.06100-8032 | pcs | 35 |
340 | Injector with sprayer assembly | 65.10101-7053 | pcs | 120 |
341 | Water pump gasket | 65.06901A0074 | pcs | 80 |
342 | Piston “DOOSAN” PU 222 TI | 65.02501-0708 | pcs | 120 |
343 | Piston rings | 65.02503-0131 | k-t | 120 |
344 | Connecting rod “DOOSAN” PU 222 TI | 65.02401-0012 | pcs | 60 |
345 | Main shaft insert | 65.01110-6529 | k-t | 10 |
346 | Crankshaft assembly | 65.02101-7112 | pcs | 10 |
347 | Connecting rod insert “DOOSAN” PU 222 TI | 65.02410-0100 | pcs | 120 |
348 | Connecting rod insert “DOOSAN” PU 222 TI | 65.02410-0200 | pcs | 120 |
349 | High pressure fuel pump assembly | 65.11101-7334 | pcs | 20 |
350 | Oil pump “DOOSAN” PU 222 TI | 65.05100-6043A | pcs | 5 |
351 | Air filter element | 65.08304-6005 | pcs | 800 |
352 | Cooling thermostat “DOOSAN” PU222T | 65.06402-0006 | pcs | 30 |
353 | Oil cooler seal “DOOSAN” PU 222 TI | 65.05901-0014 | pcs | 50 |
354 | Control panel of devices “DOOSAN” PU222TI | 65.061700-6031B | pcs | 20 |
355 | Diesel engine sensor “DOOSAN” PU222TI | 65.27161-6001 | pcs | 10 |
356 | Tachometer sensor (on the flywheel) “DOOSAN” PU222TI | 65.27103-7007 | pcs | 10 |
357 | Oil pressure sensor “DOOSAN” PU 222 TI | 65.27431-6004 | pcs | 10 |
358 | DOOSAN piston pin” PU222TI | 65.02502-0081 | pcs | 12 |
359 | Connecting rod bushing DOOSAN” PU222TI | 65.02405-1008 | pcs | 60 |
Spare parts for power drive (analogue is considered) (lot is indivisible) | ||||
360 | Cardan shaft clutch “VOITH” 12502463210 | K060.199.1034.N50 | pcs | 50 |
361 | Cardan shaft 125.024605100A | G040 1644 | k-t | 62 |
362 | Friction ring 125.01869110 | K060.057.0020 | k-t | 45 |
363 | Friction disc 125.0175580001 | K060.055.0021 | k-t | 45 |
364 | Highly elastic coupling 125.0157030001 | K060.152.0415.N50 | k-t | 45 |
365 | Connecting element 125.0079620001 | K060.050.1037 | k-t | 60 |
366 | Cardan crosspiece with clutch bearing “VOITH” | DIN 71412 | pcs | 50 |
Spare parts for the power unit of the ASDU or similar (lot is indivisible) | ||||
367 | Power reducer (step-down) RCS-1.53 rpm-1500 | 4062.38.000 | pcs | 80 |
368 | I-st shaft of the power reducer RCS-1.53 | 4062.38.010 | pcs | 70 |
369 | II-nd shaft of the power reducer RCS-1.53 | 4062.38.012 | pcs | 70 |
370 | Drive shaft KPZ-900-D N III in sb | pcs | 15 | |
371 | Driven shaft KPZ-900-D N IV in the collection | pcs | 15 | |
372 | Shaft KPZ-900-D NI in sb | pcs | 15 | |
373 | Gearbox KPZ-900-U1 3D | 4062.10.500 | pcs | 10 |
374 | Oil pump KPZ-900-D with drive to the gearbox | type G11-25 | pcs | 20 |
375 | Twin transmission pulley (shaft) from the power unit ASDU-2SH-KP-U2 | 4062.08.000-1 | pcs | 20 |
376 | Single transmission pulley (shaft) from the power unit ASDU-1SHK-500-U2 | 4062.17.200 | pcs | 20 |
377 | Single transmission pulley (shaft) from power unit ASDU-2SH-500/580-U2 or equivalent | 4062.15.100 | pcs | 20 |
378 | Single transmission pulley (shaft) from power ASDU-2SH-500/580-U2 unit | 4062.15.200 | pcs | 20 |
379 | Hub of the KPZ | 4062.10.795 | pcs | 30 |
380 | Leading half coupling | 4020.06.06-4 | pcs | 10 |
381 | Hub seal for gearbox-ZD ø115mm | pcs | 12 | |
382 | Gearbox hub hub seal ø135mm | pcs | 12 | |
383 | Hub seal for gearbox-ZD ø140mm | pcs | 12 | |
384 | Seal of reduction gear 1.2x105x38-3 | GOST 6678-72 | pcs | 100 |
385 | Faceplate | 4062.38.303 | pcs | 25 |
Blowout preventer (BOP) (lot is indivisible) | ||||
386 | Blowout preventer equipment 13 5/8” x 10000 PSI, with annular preventer 13 5/8” x 5000 PSI PSI, the set includes: double ram preventer 13 5/8” x 10000 PS with pipe rams 5”, 1-annular preventer 13 5/8” x 5000 PSI, killing and choke manifold, discharge line with connecting flanges – 200 m, hydraulic control, rams Ø-5 “(127 mm) -4 pcs, Ø-5 1/2″ (140 mm) -4 pcs; blind -2 pcs, Ø-6 5/8″ (168 mm) -2 pcs; Ø-9 5/8″ (245 mm) -2 pcs; annular preventer element -2 pcs; adapter flange 13 5/8″ x 10000 PSI -13 5/8″ x 5000 PSI -1 pc; adapter flange 13 5/8″ x 10000 PSI -11” x 10000 PSI-1 pc; for servicing spare parts. | k-t | 1 | |
387 | Manifold throttling block 80×350 (China) | pcs | 2 | |
388 | Manifold throttling block 80×700 (China) | pcs | 2 | |
389 | Manifold muffler block 80×350 (China) | pcs | 2 | |
390 | Manifold muffler block 80×700 (China) | pcs | 2 | |
391 | Adapter flange 13.5/8-5000 PSI x 13.5/8-10000 PSI with studs, nuts and sealing rings | k-t | 1 | |
392 | Adapter flange 11″-10000 PSI x 13.5/8-10000 PSI with studs, nuts and sealing rings | k-t | 1 | |
393 | Test pump manual, hydraulic PSH-11 7 mPa (China) | 0534-2618906 (2616805) | k-t | 10 |
Spare parts for air defense equipment (2015) China | ||||
394 | Crosspiece | FS350-70 mPa | pcs | 4 |
395 | Double ram preventer | 2FZ350x70 mPa | pcs | 4 |
396 | Universal preventer | FH-350/35 MPa | pcs | 4 |
397 | Adapter coil, height 700 mm 13 5/8×70 mPa x13 5/8×70 mPa | pcs | 2 | |
398 | Adapter 13 5/8×35 mPa X 13 5/8×70 mPa | pcs | 2 | |
399 | Adapter 11-70mPa X 13 5/8×70 mPa | pcs | 2 | |
400 | Pipe dies 127 mm | FZ350x70 mPa | pcs | 12 |
401 | Pipe dies 140 mm | FZ350x70 mPa | pcs | 6 |
402 | Pipe dies 168 mm | FZ350x70 mPa | pcs | 4 |
403 | Spherical rubber rod | F35.11.00 | pcs | 6 |
404 | Small O-ring for back-up ring | F751A.13.03 | pcs | 10 |
405 | Large O-ring for support ring | F35.13 | pcs | 10 |
406 | Sealing ring for support ring | F35.14.00 | pcs | 10 |
407 | Wear ring for support ring | F35.12.02 | pcs | 10 |
408 | Sealing ring for housing | F35.16.00 | pcs | 10 |
409 | Sealing ring for piston | F35.19.00 | pcs | 10 |
410 | Wear-resistant ring for piston | F35.20.02 | pcs | 10 |
Spare parts for preventer 2FZ-350×350 (PPG) (lot indivisible) | ||||
411 | Set of dies ø127 | FZ 897.21.06.00 | k-t | 4 |
412 | Set of dies ø140 | FZ 897.21.07.00 | k-t | 4 |
413 | Upper plate seal | FZ 897.21.01.01 | pcs | 4 |
414 | Mechanical seal ø127 | RS 11148.09.04.02 | pcs | 4 |
415 | Mechanical seal ø140 | RS 11148.09.05.02 | pcs | 4 |
416 | Side door sealing ring | FZ 897.1.03B | pcs | 8 |
417 | Sealing ring “0” 230×5.9 mm | FZ 897.22 | pcs | 4 |
418 | Piston sealing ring | FZ 897.1.8 | pcs | 8 |
419 | Die shaft seal | GB 12.35-76 | pcs | 8 |
420 | Locking shaft seal | F 751.14.20 | pcs | 4 |
421 | Sealing ring “O” 110×5.7 mm | GB 12.35-76 | pcs | 4 |
Spare parts for the preventer FH-350×350 (PUG) (indivisible lot) | ||||
422 | Ball rubber core | F35.11 | k-t | 4 |
423 | Sealing ring “O” of the inner support ring | F 751A. 13.03 | k-t | 4 |
424 | Sealing ring “O” outside of the support ring | F 35.13 | pcs | 8 |
425 | Sealing ring for support ring | F 35.14 | pcs | 8 |
426 | Wear ring for support ring | F 35.15 | pcs | 8 |
427 | Wear-resistant ring for the housing | F 35.17 | pcs | 8 |
428 | Wear-resistant ring for piston | F 35.18 | pcs | 8 |
429 | Piston sealing ring | F 35.19 | pcs | 8 |
Spare parts for preventer 2FZ-350×350 (PPG) (lot indivisible) | ||||
430 | Set of dies ø127 | k-t | 4 | |
431 | Set of dies ø140 | k-t | 4 | |
432 | Upper plate seal | pcs | 4 | |
433 | Mechanical seal ø127 | pcs | 4 | |
434 | Mechanical seal ø140 | pcs | 4 | |
435 | Side door sealing ring | pcs | 8 | |
Spare parts for the preventer FH-350x350D (PUG) (indivisible lot) | ||||
436 | Ball rubber core | pcs | 4 | |
437 | Sealing ring “O” of the inner support ring | pcs | 8 | |
438 | Sealing ring “O” outside of the support ring | pcs | 8 | |
439 | Sealing ring for support ring | pcs | 8 | |
440 | Wear ring for support ring | pcs | 8 | |
441 | Wear-resistant ring for the housing | pcs | 8 | |
Spare parts for preventer 13⅝”x70 UZD 02 “UZTEL” (Romania) (indivisible lot) | ||||
442 | Die Block 6⅝” (168 mm) | 305100050437 | pcs | 6 |
443 | Die Block 5½” (140 mm) | 305100043366 | pcs | 6 |
444 | Die block 5″ (127 mm) | 305100048778 | pcs | 6 |
445 | Blowout Preventer Piston Rod 11×35 | 305100049677 | pcs | 6 |
446 | Replacement bushing ø90 mm | 305100027143 | pcs | 6 |
447 | Replacement bushing ø120 mm | 305100048624 | pcs | 6 |
448 | Lid sealing gasket | 305100043421 | pcs | 6 |
449 | Sealing gasket ø70 | 450030300002 | pcs | 6 |
450 | Sealing gasket for rod ø90 | 716014511002 | pcs | 6 |
451 | Sealing gasket for rod ø120 | 716014623004 | pcs | 6 |
452 | Ring “0”-53007100 | 714101157005 | pcs | 6 |
453 | Ring “0”-53009000 | 714101165008 | pcs | 6 |
454 | Ring “0”-70012200 | 714101596008 | pcs | 6 |
Spare parts for preventer 13⅝”x70 UZ 03 “UZTEL” (Romania) (lot indivisible) | ||||
455 | Ring die | 305100048079 | pcs | 3 |
456 | Sealing bag 683 | 716001329003 | pcs | 3 |
457 | Sealing bag 646 | 716001332004 | pcs | 3 |
458 | Sealing bag 746 | 716001335007 | pcs | 3 |
Spare parts for air defense manifold “UZTEL” (Romania) (lot indivisible) | ||||
459 | Adjustable nipple | Series 924 | pcs | 10 |
460 | Wedge gate valve with threaded end | Series 810, 811 | pcs | 5 |
461 | Wedge gate valve with flanged end | Series 810, 811 | pcs | 5 |
462 | Wedge gate valve with flanged end | Series 813 | pcs | 5 |
463 | Hydraulically operated gate valve | HM 810, 811 Series | pcs | 5 |
464 | Gate valve with hydraulic-manual drive | HM 810, 811 Series | pcs | 5 |
Spare parts for the PPG preventer 16¾”x21 “UPETROM” (Romania) (indivisible lot) | ||||
465 | Die Block 5½” (140 mm) | pcs | 3 | |
466 | Die block 5″ (127 mm) | pcs | 3 | |
467 | Upper seal | pcs | 3 | |
468 | End seal die ø127 mm | pcs | 3 | |
469 | End seal die ø140 mm | pcs | 3 | |
470 | Door seal | pcs | 3 | |
Spare parts for the PUG preventer 16¾”x21 “UPETROM” (Romania) (indivisible lot) | ||||
471 | Sealing cuff | k-t | 3 | |
472 | Ring element | pcs | 2 | |
Steel rope | ||||
473 | Steel rope ø12 mm | tn | 20 | |
474 | Steel rope ø15 mm | tn | 20 | |
475 | Steel rope ø16.5 mm | tn | 12 | |
476 | Steel rope ø19.5 mm | tn | 10 | |
Pumps are different | ||||
477 | Pump 32-PL for cooling rods, vertical with electric motor | 12VB.22.00B (F-1600/F-1300) | k-t | 10 |
478 | Centrifugal 32-B180J- 2.2 kW(50Hz) spray pump, without electric motor | BZ030100 | pcs | 40 |
479 | Centrifugal pump, top-up 11 kW, without electric motor | SB4″x3″-9.5″ | pcs | 5 |
480 | Centrifugal pump for funnel 75 kW, without electric motor | SB8x6х12-1/2″ | pcs | 5 |
481 | Centrifugal pump 55 kW without electric motor | SB8x6J-12-12,5″ | pcs | 4 |
482 | Cutting pump 55 kW, without electric motor | JQ6x5J-10 | pcs. | 5 |
483 | Booster pump 55 kW, without electric motor | SB8x6x12 | pcs | 10 |
484 | Gear pump 2S | NB060300 | pcs | 5 |
485 | Gear oil pump LWBZ-40/6 (50HZ) | BZ040100 | pcs | 15 |
486 | Sand pump SB-5″x60-12½″ without electric motor | SB568100 | pcs | 2 |
487 | Sand pump SB-2″x2J-8″; SB-2‴х3J-8‴ (80 m3/hour) without electric motor | SB230100 | pcs | 4 |
488 | Slurry pump SB-5‴х6J-12½‴ (155 m3/hour) without electric motor | SB 560100 | pcs | 2 |
Spare parts for drilling winch LBU-1200 or similar(lot is indivisible) | ||||
489 | Lifting shaft | 4062.78.150 | pcs | 10 |
490 | 5th speed transmission shaft | 4062.79.000 | pcs | 8 |
491 | Rotor transmission | 4062.92.000 | k-t | 12 |
492 | Spool friction shaft | 4062.80.000 | pcs | 2 |
493 | Spool shaft | 4062.92.00 | pcs | 8 |
494 | Friction reel | 4062.80.100 | pcs | 12 |
495 | Winch gearbox shaft I | 4062.91.151 | pcs | 4 |
496 | Winch gearbox shaft II | 4062.99.104 | pcs | 4 |
497 | Winch gearbox RL-11000 | 4062.99.150 | pcs | 2 |
498 | Brake pulley | 4062.78.136 | pcs | 66 |
499 | Cardan shaft with hook (L=2680 mm)01.052.200-03 | 4062.90.600 Sat | pcs | 26 |
500 | Glass of GUKs | pcs | 150 | |
501 | Cardan shaft crosspiece splined | 4062.90.517 | pcs | 40 |
502 | Cardan shaft crosspiece keyed | 4062.90.518 | pcs | 25 |
503 | Double swivel, 2-cantilever | 4062.39.100 | pcs | 50 |
504 | Swivel 4-10 03.2067.002 | 4062.97.200 | pcs | 50 |
505 | Flanged swivel 2-16 (single) | 03.2067.002 | pcs | 160 |
506 | 2-valve tap | 4008.71.500-2 | pcs | 100 |
507 | 4-valve tap | 4003.71.220-10 | pcs | 80 |
508 | 4 valve valve | 4008.71.243 | pcs | 100 |
509 | Surge arrester valve | 4062.71.070 | pcs | 60 |
510 | Distributor REP 1-1-20 1.0 MPa | 14088.95.250-01 | pcs | 40 |
511 | Friction reel pulley | 4062.80.121 | pcs | 16 |
512 | Drag reel brake | 4062.84.200 | pcs | 12 |
513 | Friction reel tape | 4062.84.201sb | pcs | 40 |
514 | Friction reel lining | 4066.43.127 | meter | 600 |
515 | Brake band | 4062.81.000 | pcs | 20 |
516 | Rotor transmission cam clutch | 4062.92.008 | pcs | 80 |
517 | Driller’s control panel | 4062.95.050 | pcs | 10 |
518 | Hydrodynamic brake unit UTG-1450 | 4062.76.100 | pcs | 10 |
519 | Hydrodynamic brake tank UTG-1450+A566 | 4062.97.160 | pcs | 10 |
520 | Pneumatic fastener | 4062.85.000 | pcs | 18 |
521 | Chain Puller | 4085.08.450 | pcs | 20 |
522 | Roller guide insert assembly | 4062.45.450 Sat. | k-t | 30 |
523 | Cardan rubber or similar | pcs | 500 | |
Tyre-pneumatic coupling or similar (lot indivisible) | ||||
524 | Tyre pneumatic coupling 300×100 | pcs | 50 | |
525 | Tyre pneumatic coupling 500×125 | pcs | 220 | |
526 | Tyre pneumatic coupling 700×200 | pcs | 20 | |
527 | Tyre pneumatic coupling 1070×200 | pcs | 130 | |
Spare parts for drilling pump UNB-600 or similar (lot indivisible) | ||||
528 | Hydraulic box (left) | 4045.53.811 | pcs | 16 |
529 | Hydraulic box (right) | 4045.53.812 | pcs | 16 |
530 | Cylinder bushing ø130 mm | 4045.53.501-07 | pcs | 220 |
531 | Cylinder bushing ø140 mm | 4045.53.501-06 | pcs | 250 |
532 | Cylinder bushing ø150 mm | 4045.53.501-05 | pcs | 350 |
533 | Cylinder bushing ø160 mm | 4045.53.501-04 | pcs | 350 |
534 | Cylinder bushing ø170 mm | 4045.53.501-03 | pcs | 300 |
535 | Cylinder bushing ø180 mm | 4045.53.501-02 | pcs | 250 |
536 | Cylinder bushing ø200 mm | 4066.53.501 | pcs | 150 |
537 | Piston ø130 mm | 4045.53.230 | pcs | 330 |
538 | Piston ø140 mm | 4045.53.233 | pcs | 375 |
539 | Piston ø150 mm | pcs | 525 | |
540 | Piston ø160 mm | 4045.53.235 | pcs | 525 |
541 | Piston ø170 mm | pcs | 450 | |
542 | Piston ø180 mm | 4045.53.237 | pcs | 375 |
543 | Piston ø200 mm | 4045.53.239 | pcs | 225 |
544 | Bronze bushing | 4045.53.66-1 | pcs | 50 |
545 | Piston rod ШП-70 with nuts | 4066.53.520-SB | pcs | 1200 |
546 | Rod seal M-70 | 4066.53.53 | pcs | 5000 |
547 | Rod seal housing | pcs | 50 | |
548 | Valve cover cuff | 4066.53.212 | pcs | 2000 |
549 | K-9 valve assembly | 14023.53.090-2 | pcs | 1000 |
550 | Cylinder liner seal | 4066.53.578 | pcs | 3500 |
551 | Cylinder liner ring | 4066.53.586 | pcs | 3000 |
552 | Valve plate | 4066.53.615 | pcs | 2000 |
553 | Compensator diaphragm D-70 | 4045.53.230 | pcs | 50 |
554 | Crosshead pin | 4045.53.76-2 | pcs | 30 |
555 | Cylinder cover with bolts | 4045.53.259-3 | pcs | 10 |
556 | Valve cover | 4045.53.259-3 | pcs | 10 |
557 | Piston lock nut | 4045,53,511-1 | pcs | 20 |
558 | Crosshead guide (lower) | 4045.53.105.4 | pcs | 40 |
559 | Crosshead guide (upper) | 4045.53.106.4 | pcs | 40 |
560 | Membrane with a set of rings | 4066.53.271 4066.53.753 | k-t | 500 |
561 | Valve body of the box with nut | pcs | 50 | |
562 | Studs M42x200 with nuts | pcs | 200 | |
563 | Spacer ring | pcs | 4 | |
564 | Glass assembly (cylinder boxes) | pcs | 15 | |
565 | Crosshead lining (slider) | pcs | 30 | |
Spare parts for compressor “4VU 1-5/9M4UHL4” or analogue (lot indivisible) | ||||
566 | Crankshaft with bearing 302601033N | 302-601-03 3P 1 | pcs | 20 |
567 | I-stage piston assembly | 302-601-06-3/03-24 | k-t | 29 |
568 | II stage piston assembly | 302-601-06-3/03-25 | k-t | 29 |
569 | 1st stage cylinder block | pcs | 2 | |
570 | 2nd stage cylinder block | pcs | 2 | |
571 | Countershaft for mechanical compressor | 4062.70.050 | pcs | 2 |
572 | Piston ring, compression U-125 in assembly | 302-601-06-3/04-34 | k-t | 50 |
573 | Piston ring, oil scraper MP-125 in assembly | 31680/04-132 | k-t | 30 |
574 | Piston ring, compression U-210 in assembly | 302-601-06-3/04-31 | k-t | 40 |
575 | Piston ring, oil scraper MP-210 in assembly | 31677/04-130 | k-t | 60 |
576 | Retaining ring | pcs | 40 | |
577 | Connecting rod assembly | 302-601-04 A | k-t | 33 |
578 | Air swivel (left) for counter drive | 26007.3040.16 | pcs | 16 |
579 | 2nd stage valve head | pcs | 15 | |
580 | Piston pin | pcs | 10 | |
581 | 1st stage saddle | pcs | 10 | |
582 | 1st stage plate | pcs | 10 | |
583 | 2nd stage saddle | pcs | 10 | |
584 | 2nd stage plate | pcs | 10 | |
Spare parts for step-down gearbox JS-1200 (China) (lot indivisible) | ||||
585 | I-st shaft of the power reducer with bearings | pcs | 6 | |
586 | II-nd shaft of the power reducer with bearings | pcs | 6 | |
587 | Step-down gearbox (1.53)(900 kW)(1500 rpm) (1275x1085x980) | JS-1200 | k-t | 4 |
588 | Cardan clutch assembly | W51.5×870 | k-t | 4 |
Spare parts for rotor R-700 or analogue (lot indivisible) | ||||
589 | Drive shaft of the rotor R-700 | 14016.45.010 | pcs | 14 |
590 | Roller guide insert | 4062.45.450 | pcs | 20 |
591 | Rotor insert R-700 | 1416.45.270 | pcs | 6 |
592 | Rotor jaw R-560 | 4-8-41/82 | pcs | 6 |
593 | Star Z=19 P=50.8 | 4045.45.520 | pcs | 35 |
594 | Asterisk Z=21 P=50.8 | 4045.45.511 | pcs | 5 |
595 | Asterisk Z=23 P=50.8 | 4045.45.512 | 20 | |
596 | Bevel gear Z-18 | 14016.45.015 | pcs | 6 |
597 | Cord 4s ø8 mm. L=3.0 M. | pcs | 10 | |
598 | Cord 4s ø5 mm. L=6.0 M. | pcs | 10 | |
599 | Seal 210 | pcs | 20 | |
600 | Main support (bearing 1687/770) | pcs | 10 | |
601 | Auxiliary support (bearing 1688/770) | pcs | 10 | |
Spare parts for manifold “MV-2U” or similar | ||||
602 | Manifold gate valve ZPRM-100×400 | 00.00.000 | pcs | 12 |
603 | Manifold valve ZPRM-100×320 | 00.00.000 | pcs | 10 |
604 | Manifold gate valve ЗМ-80х35G (hydraulic) | M10.02.02.000 | pcs | 10 |
Spare parts for crane KP | ||||
605 | Crane rotation reducer with electric motor KPB-3M or similar | 01.00.000.SAT | k-t | 10 |
Lifting equipment | ||||
606 | Electric hoist 10 tons, height 8 meters | GOST22584-96 | pcs | 1 |
607 | Electric hoist 5 tons, height 6 meters | pcs | 25 | |
608 | Electric hoist 3.2 tons, height 6 meters | pcs | 55 | |
609 | Electric hoist 2 t, 6m high | pcs | 2 | |
610 | Hand hoist 1.5 t, 6 m high | pcs | 3 | |
Spare parts for hydraulic station CH6U-76«UPETROM» (Romania) | ||||
611 | Triple plunger pump 3RU-20 | 614.20-00.00.00.0 | pcs | 10 |
Electric gas welding equipment, tools and accessories | ||||
612 | Welding unit on chassis | pcs | 15 | |
613 | Welding transformer ВХ1-400 (China) | JB 3643-2000 | pcs | 10 |
614 | Welding unit without chassis | pcs | 9 | |
615 | Electrode “ANO” ø4 mm | kg | 12000 | |
616 | Electrode “UONI” ø4 mm | GOST9466-75 | kg | 5000 |
617 | Electrode “UONI” ø3 mm | kg | 1500 | |
618 | Manual cutting cutter RZP-902 or similar | RSR-106R | pcs | 80 |
619 | Propane reducer BPO 5-4 or similar | RED-907 | pcs | 80 |
620 | Oxygen reducer BKO 504 or similar | RED-905 | pcs | 80 |
621 | Oxygen cylinder valve VK-74 or similar | pcs | 100 | |
Rolling bearings (lot indivisible) | ||||
622 | Bearing 205 | GOST 7242-81 | pcs | 120 |
623 | Bearing 207 | GOST 8338-75 | pcs | 10 |
624 | Bearing 208 | GOST 8338-75 | pcs | 20 |
625 | Bearing 209 | GOST 8338-75 | pcs | 20 |
626 | Bearing 210 | GOST 8338-75 | pcs | 30 |
627 | Shaft bearing 214 | GOST 8338-75 | pcs | 22 |
628 | Shaft bearing 302 | GOST 8338-75 | pcs | 6 |
629 | Shaft bearing 305 | GOST 8338-75 | pcs | 30 |
630 | Shaft bearing 309 | GOST 8338-75 | pcs | 20 |
631 | Bearing 310 | GOST 8338-75 | pcs | 25 |
632 | Bearing 311 | GOST 8338-75 | pcs | 10 |
633 | Bearing 312 | GOST 8338-75 | pcs | 70 |
634 | Bearing 313 | GOST 8338-75 | pcs | 20 |
635 | Bearing 314 | pcs | 30 | |
636 | Bearing 317 | pcs | 10 | |
637 | Bearing 322 | pcs | 20 | |
638 | Bearing 1612 | GOST 5721-75 | pcs | 50 |
639 | Bearing 2236 | pcs | 10 | |
640 | Bearing 2322 | pcs | 20 | |
641 | Bearing 3518 (22218) | GOST 5721-75 | pcs | 50 |
642 | Bearing 3519 (22219) | GOST 5721-75 | pcs | 10 |
643 | Bearing 3520 (22220) | GOST153520 | pcs | 20 |
644 | Bearing 3522 (22222) | GOST 5721-75 | pcs | 130 |
645 | Bearing 3524 (22224) | GOST 5721-75 | pcs | 60 |
646 | Bearing 3528 (22228) | GOST 520-2011 | pcs | 20 |
647 | Bearing 3538 (22238) | GOST 8338-75 | pcs | 20 |
648 | Bearing 3530 (22230) | pcs | 10 | |
649 | Bearing 3612 (22312) | GOST 8338-75 | pcs | 70 |
650 | Bearing 3618 (22318) | GOST 5721-75 | pcs | 80 |
651 | Bearing 3622 (22322) | GOST 8338-75 | pcs | 10 |
652 | Bearing 3624 (22324) | GOST 8338-75 | pcs | 250 |
653 | Bearing 3628 (22328) | GOST 8338-75 | pcs | 60 |
654 | Bearing 3630 (22330) | GOST 8338-75 | pcs | 40 |
655 | Bearing 3634 (22334) | GOST 5721-75 | pcs | 20 |
656 | Bearing 3636 (22336) | GOST 5721-75 | pcs | 10 |
657 | Bearing 5692/800 | GOST31309-98 | pcs | 10 |
658 | Bearing 5691/800 | GOST31309-99 | pcs | 10 |
659 | Bearing 6228 | GOST 7372-89 | pcs | 10 |
660 | Bearing 6311 | GOST 7372-89 | 10 | |
661 | Bearing 7352 | GOST 333-79 | pcs | 12 |
662 | Bearing 7538 | GOST7372-89 | pcs | 28 |
663 | Bearing 51111 | GOST6874-75 | pcs | 20 |
664 | Bearing 10079/710 | GOST520-2011 | pcs | 22 |
665 | Bearing 8110 | pcs | 20 | |
666 | Bearing 8222 | pcs | 20 | |
667 | Bearing 32617 | pcs | 20 | |
668 | Bearing 24122 | GOST4053722 | pcs | 20 |
669 | Bearing 32630 | ZP050018 | pcs | 20 |
High pressure hoses (lot indivisible) | ||||
670 | Rubber sleeve ø9 mm 2.0 mPa oxygen | GOST9356-75 | meter | 3200 |
671 | Rubber sleeve ø15 mm 2.0 mPa | GOST 18698-79 | meter | 450 |
672 | Rubber sleeve ø20 mm 2.0 mPa | GOST 18698-79 | meter | 250 |
673 | Rubber sleeve ø25 mm 2.0 mPa | meter | 120 | |
674 | Rubber sleeve ø32 mm 2.0 mPa | meter | 80 | |
675 | Rubber sleeve ø42 mm 2.0 mPa | meter | 80 | |
Sealing materials (lot is indivisible) | ||||
676 | Gland packing ø 8mm | 8x8mm | kg | 30 |
677 | Gland packing ø10 mm | 10x10mm | kg | 60 |
678 | Gland packing ø12 mm | 12x12mm | kg | 30 |
679 | Gland packing ø15 mm | 15x15mm | kg | 40 |
680 | Gland packing ø22 mm | 22x22mm | kg | 50 |
681 | Impregnated hemp gland packing | 14 x 14 mm | kg | 130 |
682 | Impregnated hemp gland packing | 16 x16 mm | kg | 200 |
683 | Impregnated hemp gland packing | 18 x 18 mm | kg | 200 |
684 | Impregnated hemp gland packing | 19 x 19 mm | kg | 200 |
685 | Oil and petrol resistant paronite | PMB-1 mm | kg | 100 |
686 | Oil and petrol resistant paronite | PMB-2 mm | kg | 200 |
687 | Oil and petrol resistant paronite | PMB-3 mm | kg | 400 |
688 | Oil and petrol resistant paronite | PMB-4 mm | kg | 400 |
689 | FUM tape 0.1-1.0 | 92480800011 | kg | 20 |
690 | FUM tape 0.08-1.5 | 92480800011 | kg | 20 |
Belts (lot indivisible) | ||||
691 | Belt A-1250 mm | GOST 1284.1-89 | pcs | 100 |
692 | Belt B-1250 mm | pcs | 20 | |
693 | Belt A-1330 mm | pcs | 50 | |
694 | Belt B-1400 mm | pcs | 50 | |
695 | Belt B-1650 mm | pcs | 50 | |
696 | Belt B-1600 mm | pcs | 50 | |
697 | Belt B-1800 mm | pcs | 12 | |
698 | Belt A-2000 mm | pcs | 50 | |
699 | Belt B-2000 mm | pcs | 50 | |
700 | Belt A-2120 mm | pcs | 22 | |
701 | Belt A-2240 mm | pcs | 82 | |
702 | Belt A-2800 mm | GOST 1284-80 | pcs | 125 |
703 | Belt C-4000 mm | GOST 1284.1-89 | pcs | 170 |
704 | Belt C(B)-4500 mm | GOST 1284.1-89 | pcs | 280 |
705 | Belt E(D)-5600 mm | GOST 1284.1-89 | pcs | 1100 |
706 | Belt E(D)-10000 mm | GOST 1284.1-89 | pcs | 1000 |
Wellhead equipment | ||||
707 | Column head complete with fountain fittings OKK-3-70 MPa 140x245x324x426 with AFC 6-80/65×70 MPaWELL HEAD CASING SIZES 16.3/4″ x 12.3/4″ x 9.5/8″ x 5.1/2″ x 10000 PSI AND X-MAS TREE ASSEMBLY 3.1/16″ x 2.9/16″ x 10000 PSI | k-t | 14 | |
708 | Column head complete with fountain fittings OKK-3-70 MPa 168x245x340x508 with AFC 6-80/65×70 MPa WELL HEAD CASING SIZES 20″ x 13.3/8″ x 9.5/8″ x 6.5/8″ x 10000 PSI AND X-MAS TREE ASSEMBLY 3.1/16″ x 2.9/16″ x 10000 PSI | k-t | 5 | |
709 | Column head complete with fountain fittings OKK-2-70 MPa-140x245x324 with AFK6-80/65×70 MPaWELL HEAD CASING SIZES 12.3/4″ x 9.5/8″ x 5.1/2″ x 10000 PSI AND X-MAS TREE ASSEMBLY 3.1/16″ x 2.9/16″ x10000 PSI | k-t | 5 | |
710 | Column head complete with fountain fittings OKK-2-70 MPa 140x245x340 with AFK6-80/65×70 MPa WELL HEAD CASING SIZES 13.3/8″ x 9.5/8″ x 5.1/2″ x 10000 PSI AND X-MAS TREE ASSEMBLY 3.1/16″x2.9/16″ x10000 PSI | k-t | 13 | |
711 | Column head complete with fountain fittings OKK-2-35 MPa-140x245x324 with AFK6-65×35 MPa WELL HEAD CASING SIZES 12.3/4″ x 9.5/8″ x 5.1/2″ x 5000 PSI AND X-MAS TREE ASSEMBLY 3.1/16″ x2.9/16″ x 5000 PSI | k-t | 12 | |
712 | Column head complete with fountain fittings OKK-2-35 MPa-168x245x340 with AFK6-65×35 MPaWELL HEAD CASING SIZES 13.3/8″ x 9.5/8″ x 6.5/8″ x 5000 PSI AND X-MAS TREE ASSEMBLY 3.1/16″ x2.9/16″ x 5000 PSI | k-t | 4 | |
713 | Column head complete with fountain fittings OKK-1×35 mPa-140×245 with AFK6-65×35 mPa WELL HEAD CASING SIZES 9.5/8″ x 5.1/2″ x 5000 PSI AND X-MAS TREE ASSEMBLY 3.1/16″ x2.9/16″ x 5000 PSI | k-t | 4 | |
Spare parts for wellhead equipment (lot indivisible) | ||||
714 | Wedge packer 16¾” x 12¾”-10000 PSI with top sealing cuff “R24” API | KYD 80-700 | k-t | 10 |
715 | Wedge Packer 13⅝” x 9⅝”-10000 PSI with API “R24” Upper Seal | KYD 80-700 | k-t | 10 |
716 | Wedge Packer 11″ x 5½”-10000 PSI with API “R24” Upper Seal | KYD 80-700 | k-t | 10 |
717 | Wedge Packer 9″ x 5½”-10000 PSI with API “R24” Upper Seal | KYD 80-700 | k-t | 10 |
718 | Sealing Gasket BX156 API | pcs | 10 | |
719 | Sealing Gasket BX153 API | pcs | 10 | |
Spare parts for diesel engine CAT-3512, CAT-3512B (lot indivisible) | ||||
720 | Oil filter (manufactured by CAT) | 1R-0726 | pcs | 1600 |
721 | Fuel filter (manufactured by CAT) | 1R-0756 | pcs | 1000 |
722 | Air filter (manufactured by CAT) | 4P-0710 | pcs | 200 |
723 | Air filter (manufactured by CAT) | 4P-0711 | pcs | 100 |
724 | Air filter (manufactured by CAT) | 8N6309 | pcs | 200 |
725 | Air filter (manufactured by CAT) | 8N2556 | pcs | 100 |
726 | Fan belt (6 V-belts) | 8N6700 | k-t | 20 |
727 | Fan blade assembly | pcs | 2 | |
728 | Main water pump | 2W-9729 | pcs | 4 |
729 | Pneumatic starter | INGERSOL(2015) | pcs | 2 |
730 | Water cooling radiator core with seal | 3215B (RTM) | pcs | 20 |
731 | Radiator core with sealing cuff | 3512 (RTN) 2W-0181 | pcs | 100 |
Spare parts for diesel engine CAT C-15 (lot indivisible) | ||||
732 | Air compressor “CAT” (256-6164) | 223-3637 | pcs | 4 |
733 | Oil filter (manufactured by CAT) | 1R0716 | pcs | 300 |
734 | Fuel filter (manufactured by CAT) | 1R0749 | pcs | 150 |
735 | Vee Belt-Fan | Vee Belt Fan | pcs | 12 |
736 | Air filter | 1890202 | pcs | 30 |
737 | Air filter | 9Y3879 | pcs | 30 |
738 | Water radiator “SAT” (256-6164) | 256-2674 | pcs | 2 |
739 | Water pump “CAT” (174-5986) | 161-5719 | pcs | 3 |
740 | Fuel supply pump “CAT” (2574-7275) | 191-5054 | pcs | 1 |
741 | Turbocharger “CAT” (239-9988) | 242-3492 | pcs | 4 |
742 | Electric starter 24V “CAT” (120-9100) | 237-1962 | pcs | 3 |
743 | Generator 28V “CAT” (317-3821) | 332-4696 | pcs | 4 |
744 | Fan Drive Belt “CAT” (197-4567) | 5N-2346 | pcs | 12 |
745 | Alternator Belt “CAT” (286-8179) | 7N-3949 | pcs | 9 |
Spare parts for diesel engine CAT-3508 (lot indivisible) | ||||
746 | Water radiator “CAT” (7E-7528) (PTN) (core) | 7C-4401 | k-t | 2 |
747 | Pneumatic starter «CAT» (7С-3371) INGERSOL (2010) | 7C-3372 | pcs | 4 |
748 | Fan drive belt | HG/T-2819 | pcs | 16 |
749 | Fuel pump “SAT” (8N-6151) | 169-8615 | pcs | 1 |
Spare parts for diesel engine CAT-3406, CAT-3408 (lot indivisible) | ||||
750 | Generator 24V “CAT” (5N-5692) | CAT-3406 JDK | pcs | 2 |
751 | Electric starter 24V (5N-4801) | CAT-3406 JDK | pcs | 2 |
752 | Oil filter (manufactured by CAT) | 1R-0716 | pcs | 200 |
753 | Fuel filter (manufactured by CAT) | 1R-0749 | pcs | 100 |
754 | Water radiator “CAT” (142-3318) | 142-1928 | pcs | 2 |
755 | Oil pump “CAT” | 161-4113 | pcs | 2 |
756 | Water pump “CAT” (9N-3288) | 135-4926 | pcs | 2 |
757 | Fuel pump “CAT” (2W-8543) | 4P-1385 | pcs | 2 |
758 | Turbocharger “CAT” (1W-4209) | 1W-3728 | pcs | 4 |
759 | Drive belt “CAT” (7N-8840) | 6N-6656 | pcs | 6 |
760 | Drive belt “CAT” (7 W-1340) | 4N-8216 | pcs | 6 |
Pumping equipment for the management of “Water supply” | ||||
761 | CNS 300×300 with electric motor 400 kW 1500 rpm not explosion-proof or similar | CNS 300×300 | k-t | 7 |
762 | CNS 300×240 with electric motor 315 kW 1500 rpm not explosion-proof or similar | CNS 300×240 | k-t | 5 |
763 | CNS 300×180 with electric motor 315 kW 1500 rpm not explosion-proof or similar | CNS 300×180 | k-t | 5 |
764 | CNS 180×255 with electric motor 250 kW 1500 rpm not explosion-proof or similar | CNS 180×255 | k-t | 3 |
765 | CNS 180×170 with electric motor 200 kW (6 kW) 1500 rpm not explosion-proof or similar | CNS 180×170 | k-t | 8 |
766 | CNS 180×128 with electric motor 132 kW 1500 rpm not explosion-proof or similar | CNS 180×128 | k-t | 2 |
767 | CNS 180×85 with electric motor 75 kW 1500 rpm not explosion-proof or similar | CNS 180×85 | k-t | 2 |
768 | CNS 850×240 with an electric motor 800 kW 1500 rpm not explosion-proof or similar | CNS 850×240 | k-t | 2 |
769 | Pump D 200/36 with electric motor 45 kW 1500 rpm not explosion-proof or similar | D 200/36 | k-t | 6 |
770 | Pump OMEGA 250-800A or similar | k-t | 1 | |
771 | Pump K40x40 or similar | k-t | 4 | |
Spare parts for the pump CNS 850 (lot indivisible) | ||||
772 | CNS-850 Shaft | pcs | 2 | |
773 | CNS-850 Impeller 1 stage | MSG-7-01-118-1 | pcs | 5 |
774 | CNS-850 Impeller | MSG-7-01-178 | pcs | 10 |
775 | CNS-850 Distance bushing | MSG-7-01-126-1 | pcs | 5 |
776 | CNS-850 Water seal bushing | MSG-7-01-112 | pcs | 5 |
777 | CNS-850 Guide apparatus | MSG-7-01-119 | pcs | 10 |
778 | CNS-850 Protective bushing | pcs | 5 | |
779 | CNS-850 Bearing bushing | pcs | 5 | |
780 | CNS-850 1st stage guide vane | pcs | 6 | |
781 | TsNS-850 Bushing 190312 | MSG-7-01-102,00 | pcs | 5 |
782 | CNS-850 Nut 1904 | MSG-7-01-107 | pcs | 5 |
783 | TsNS-850 Bushing oil seal 1905 | MSG-7-01-108 | pcs | 5 |
784 | CNS-850 Shaft shirt 1906 | MSG-7-01-109,1 | pcs | 5 |
785 | CNS-850 Front bracket | MSG-7-01-114 | pcs | 5 |
786 | CNS-850 Suction cover 1909 | MSG-7-01-116 | pcs | 3 |
787 | CNS-850 Sealing ring 1st stage 1910 | MSG-7-01-117 | pcs | 8 |
788 | CNS-850 Working wheel 2nd stage 191112 | MSG-8-01-118-1 | pcs | 5 |
789 | CNS-850 Sealing ring 1913 | MSG-7-01-121 | pcs | 5 |
790 | CNS-850 Sealing ring 1914 | MSG-7-01-122 | pcs | 4 |
791 | CNS-850 Device for guiding when issuing 1915 | MSG-7-01-123 | pcs | 5 |
792 | CNS-850 Unloading Bushing 1916 | MSG-7-01-125-1 | pcs | 4 |
793 | CNS-850 Discharge cover 1918 | MSG-7-01-132-1 | pcs | 2 |
794 | CNS-850 Rear bracket 1919 | MSG-7-01-135-1 | pcs | 2 |
795 | CNS-850 Rotary Nut 1924 12 | MSG-7-01-142-1 | pcs | 3 |
796 | CNS-850-240 Shaft (2 stage) | pcs | 2 | |
Spare parts for the CNS 300 pump (lot indivisible) | ||||
797 | CNS-300 Rotor Nut | 8MS 7.01.07 | pcs | 10 |
798 | Body of the device guiding CNS 300-120-600 | 8MS 7.0119-2 | pcs | 20 |
799 | CNS-300 Guide ring | CNS 300-120 | pcs | 20 |
800 | CNS-300 Sealing cord for the guide apparatus housing | CNS 300-120 | pcs | 20 |
801 | CNS-300 Working wheel when issuing | 8MS 7.0118-1 | pcs | 5 |
802 | CNS-300 Sealing ring | 8MS 7.0120 | pcs | 14 |
803 | CNS-300 Sealing ring | 8MS 7.0121 | pcs | 14 |
804 | CNS-300 Unloading disk | 8MS 7.0109 | pcs | 16 |
805 | CNS-300 Shaft of 3-stage pump | CNS300-180 | pcs | 2 |
806 | CNS-300 Bearing bushing | pcs | 8 | |
807 | CNS-300 Cuff | GOST 87-52-79 | pcs | 20 |
808 | CNS-300 Throttling bushing | pcs | 10 | |
809 | CNS-300 working wheel | 8MS 7.0118 | pcs | 40 |
810 | CNS-300 impeller 1 stage | pcs | 10 | |
811 | CNS-300 shaft shirt | 8MS 7.0126 | pcs | 10 |
812 | CNS-300 Distance bushing | 8MS 7.0113 | pcs | 10 |
813 | CNS-300 Water seal bushing | CNSN-300-180.001 | pcs | 10 |
814 | CNS-300 Front bracket | 8MS 7.0129 | pcs | 10 |
815 | CNS-300 Rear bracket | 8MS 7.0103 | pcs | 10 |
816 | CNS-300 Unloading bushing | 8MS 7.0114 | pcs | 8 |
817 | CNS-300 Unloading ring | 8MS 7.0112 | pcs | 20 |
818 | CNS-300 Unloading ring | 8MS 7.0111 | pcs | 20 |
819 | CNS-300 Guide apparatus | 8MS 7.01.17-1 | pcs | 20 |
Spare parts for the pump CNS 180 (lot indivisible) | ||||
820 | CNS-180 Impeller I-stage | 180 x 255 | pcs | 13 |
821 | CNS-180 Shaft shirt | CNS 180-255.001 | pcs | 10 |
822 | CNS-180 Distance bushing | 6MS 6-0113 | pcs | 10 |
823 | CNS-180 Water seal bushing | 6MS 6-0126 | pcs | 10 |
824 | CNS-180 Unloading bushing | 6MS 6-0114 | pcs | 18 |
825 | CNS-180 Unloading ring | CNS 180-255 6 MS-0119 | pcs | 20 |
826 | CNS-180 Guide apparatus | 6MS 6-0117-1 | pcs | 20 |
827 | CNS-180 Throttling bushing | pcs | 10 | |
828 | CNS-180 Front bracket | pcs | 4 | |
829 | CNS-180 Rear bracket | pcs | 4 | |
830 | CNS-180 Bearing bushing | pcs | 8 | |
831 | CNS-180 Cuff | GOST 87-52-79 | pcs | 20 |
832 | CNS-180 Sealing ring | 6 MS 6-0121 | pcs | 14 |
833 | CNS-180 Sealing ring | 6 MS 6-0122-1-02 | pcs | 14 |
834 | CNS-180 Working wheel | 6 MS 6-0118 | pcs | 20 |
835 | CNS-180 Body of the guide apparatus | 6 MS 6-01.129 | pcs | 10 |
836 | CNS-180 Guide ring | CNS 180×85 85.1.425.01.009 | pcs | 20 |
837 | TsNS-180 Shaft of 3-stage pump | CNS 180×128 | pcs | 1 |
838 | CNS-180 5-stage pump shaft | CNS 180×212 | pcs | 1 |
Needs of the Repair and Mechanical Plant (RMZ) | ||||
Spare parts for pumps CNS-300÷120÷600 (lot indivisible) | ||||
839 | Support bracket | GOST R54804-2011 | pcs | 10 |
840 | Suction cover rear | pcs | 10 | |
841 | Rear support bracket | pcs | 10 | |
842 | Pressure cover rear | pcs | 10 | |
843 | Impeller | pcs | 50 | |
844 | Guide apparatus | pcs | 50 | |
845 | Guide vane section | pcs | 40 | |
846 | Shaft shirt | pcs | 10 | |
847 | Spacer sleeve | pcs | 10 | |
848 | Unloading disk | pcs | 10 | |
849 | Unloading ring | pcs | 20 | |
850 | Rotary nut | pcs | 10 | |
Spare parts for pumps CNS-180÷85÷425 (lot indivisible) | ||||
851 | Support bracket | GOST R54804-2011 | pcs | 10 |
852 | Suction cover front | pcs | 10 | |
853 | Rear support bracket | pcs | 10 | |
854 | Pressure cover rear | pcs | 10 | |
855 | Impeller | pcs | 50 | |
856 | Guide apparatus | pcs | 50 | |
857 | Guide vane section | pcs | 40 | |
858 | Shaft shirt | pcs | 10 | |
859 | Spacer sleeve | pcs | 10 | |
860 | Unloading disk | pcs | 10 | |
861 | Unloading ring | pcs | 20 | |
862 | Rotary nut | pcs | 10 | |
Oil and Gas Well Support Management Needs | ||||
Spare parts for cementing unit (lot indivisible) | ||||
863 | Plug valve d=50 P=70 (Pump SIN 64.00.100.000) | 2KMN | pcs | 80 |
864 | Articulated elbow d=50 P=70 (Pump SIN 64.00.100.000) | KS-70 | pcs | 851851 |
865 | Plunger d=100-7-72 (Pump SIN 64.00.100.000) | pcs | 84 | |
866 | Valve SP-507 tripleks pump 5S with proportional cover (Pump SP-507) | SP-507 tripleks | pcs | 180 |
867 | Valve seat SP-507 triplex pump | pcs | 60 | |
868 | Inlet hose d=100 L=4.5 (Pump NSP-32) | SIN 30.01.0700000 | pcs | 150 |
869 | Inlet hose d=75 L=3m (Pump NSP-32) | pcs | 20 | |
870 | High pressure hose P=35, L=10 (d=50)(Pump NSP-32) | pcs | 100 | |
871 | Discharge hose P=7, L=10 (d=50) (Pump NSP-32) | pcs | 100 | |
872 | Adjustable nozzle 2×1050 | pcs | 20 | |
873 | Articulated elbow 22 type R2”x1050 Bar (Pump SIN 64.00.100.000) | pcs | 50 | |
874 | Plug valve 2x2nkt 60 P=105 MPa (Pump SIN 64.00.100.000) | GOST 633-80 | pcs | 20 |
875 | Plug valve 2x1nkt 60 P=105 MPa (Pump SIN 64.00.100.000) | GOST 633-80 | pcs | 20 |
876 | Plug valve 2x1nkt 60 P=105 MPa | GOST 633-80 | pcs | 20 |
877 | Valve d=111 mm 9T.2.69 (Pump NPS-32) | 9T.2.69 | pcs | 360 |
878 | Valve seat d=111T.118A (NPS-32 pump) | T.118A | pcs | 120 |
879 | Cylinder sleeve d=100 (Pump NPS-32) | 6G-102 | pcs | 20 |
880 | Cylinder sleeve d=127 (Pump NPS-32) | 6G-104 | pcs | 20 |
881 | Gear pump NS-10 (Pump NPS-32) | pcs | 40 | |
882 | Gate valve d=100(4″) (Pump NPS-32) | SIN 100.13.000 | pcs | 125 |
883 | Worm NPS 01.029A (Pump NPS-32) | NPS 01.029A | pcs | 10 |
884 | Articulated knee KS-40 d=50 P=40 | KS-40(NPS-32) | pcs | 50 |
885 | Piston D=127 mm (Pump NPS-32) | 9T.2.34 | pcs | 100 |
886 | Cylinder sleeve D=115 (Pump NPS-32) | 6G-103 | pcs | 20 |
887 | Crosshead assembly (NPS-32 pump) | 9G.01.200 | pcs | 50 |
888 | Plunger d=85mm. | pcs. | 60 | |
889 | Plunger d=125mm. | pcs. | 50 | |
890 | Cuff 125x145mm. | pcs. | 1000 | |
891 | Plunger cuff Ø100mm. | pcs. | 2000 | |
892 | Plunger cuff Ø85mm. | pcs. | 1100 |
Turkmenistan rig spare parts list
Posted in InventoryList.