Yokogawa EJA210A EJA220A 

Yokogawa EJA210A EJA220A  Differential Pressure Transmitter Yokogawa EJA210A EJA220A 

Flange Mounted Differential Pressure Transmitters  Yokogawa Yokogawa EJA210A EJA220A Differential  Pressure Transmitter   with LCD display Vietnam Iran
The high performance flange mounted differential pressure transmitter models EJA210A and 220A can be used to measure levels of densities of solidifying or precipitating liquids. Both output a 4 to 20 mA DC signal corresponding to the measured differential pressure. Models EJA210A and 220A also feature remote setup and monitoring through communications with the BRAIN™ terminal and CENTUM CS™ or XL™ or HART® 275 host.

EJA210A-EMSA1F4C-9CDN/D4/*1 EJA220A-EMSA16J4C-9CDN/D4/*1/2 EJA220A-EHSA16J4C-9CDN/D4/*1/2
EJA210A-EMSA1F4C-9CDN/D4/*1 EJA220A-EMSA16J4C-9CDN/D4/*1/2
EJA220A-EHSA16J4C-9CDN/D4/*1/2 EJA210A-EHSA1F4C-9CDN/D4/*1 EJA210A-EMSA1F4C-9CDN/D4/*1
EJA210A-EHSA1F4C-9CDN/D4/*1 EJA210A-EHSA1F4C-9CDN/KF21/D4/*1 EJA210A-EHSA1F4C-9CDN/D4/*1/M13
EJA210A-DHSA1Z4B –92DN/FS1/D4/M13/T36 EJA210A-DHSA1Z4B–92DN/FS1/D4/M13/T36 EJA210A-EMSA1D2A-90DN/FF1


 EJA210A / EJA220A
Liquid Level Differential Pressure Transmitter
M CapsuleH Capsule
Range-100 to 100 kPa
(-400 to 400 inH2O)
-500 to 500 kPa
(-2000 to 2000 inH2O)
Span1 to 100 kPa
(4 to 400 inH2O)
5 to 500 kPa
(20 to 2000 inH2O)
Degrees of protectionIP67, NEMA 4X, and JIS C0920 immersion proof
Output4 to 20 mA DC or FOUNDATION™ fieldbus or PROFIBUS PA 2-wire system with digital communication
Supply voltageBRAIN and HART:10.5 to 42 V DC (10.5 to 30 V DC for Intrinsically safe type)
Fieldbus:9 to 32 V DC (9 to 24 V DC for Entity model and 9 to 17.5 V DC for FISCO model)
Ambient temperature-40 to 85 deg C (-40 to 185 deg F) (general use type)
-30 to 80 deg C (-22 to 176 deg F) (with integral indicator)
Process temperature-40 to 120 deg C (-40 to 248 deg F) (general use type)
Maximum working pressureFlange rating pressure
MountingFlange mounting
Process flange sizeEJA210A: 3-inch (80mm), 2-inch (50mm)
EJA220A: 4-inch (100mm), 3-inch (80mm)
Diaphragm material
(High side)
SUS316L, Hastelloy C-276, Tantalum
Process flange materialS25C, SUS304, SUS316
HousingCast aluminum alloy or SUS316 equivalent stainless steel (optional)
Posted in InventoryList.