ParkerHydraulicvalve1

Parker Hydraulic valve

Directional Control Valve - Series D1VW / D1VW*EE
Directional Control Valve – Series D1VW / D1VW*EE

The D1VW in NG06 (CETOP 03) is an on/off valve which provides high functional limits in combination with a very low, energy-saving pressure drop. It is optionally available with soft shift option or as explosion proof version according to ATEX and IECEx.

2-Way High-Response Valve - Series TDP
2-Way High-Response Valve – Series TDP

The pilot operated 2-way high response valves series TDP provide a precise control of high flows at maximum dynamics. Typical applications for these slip-in cartridge proportional throttle valves are die cast, injection molding and hydraulic presses.

Direct Operated Proportional Directional Control Valve - Series D1FP / D3FP
Direct Operated Proportional Directional Control Valve – Series D1FP / D3FP

Direct operated DFplus control valves D1FP in NG06 (CETOP 03) and D3FP in NG10 (CETOP 05) meet highest requirements in terms of dynamics combined with high flow, optionally with EtherCAT interface. The preferred choice for demanding hydraulic controls!

In-line Flow Control Valve – F Series
In-Line Flow Control Valve – F Series

Parker’s F Series valve is an economical, general purpose flow control valve that permits free flow in one direction and metered flow in the reverse direction in air, water and oil applications.

Pilot Operated Directional Control Valve - Series D31DW, D31NW, D41VW, D81/91VW, D111VW
Pilot Operated Directional Control Valve – Series D31DW, D31NW, D41VW, D81/91VW, D111VW

Setting standards for pilot operated on-/off valves in terms of functional limits and pressure drop, Parker’s series D31DW, D31NW, D*1VW are suitable for practically any industrial application. Optionally available as ex-proof version.

Ermeto DIN Non return valves
Ermeto DIN Non Return Valves

Parker non-return valves with nominal pressure ratings up to PN 420 bar offer a wide range of types, making them very flexible.

Ermeto DIN Ball Bearing Rotary Fittings
Ermeto DIN Ball Bearing Rotary Fittings

Parker Ball Bearing Rotary Fittings are used to connext a fixed point to a rotating, swinging or moving part via hoses. These products are used to prevent torsion and small hose radius.

2-Way Slip-In Cartridge Valve - Series CE, CP
2-Way Slip-In Cartridge Valve – Series CE, CP

2-way slip-in cartridge valves series CE and CP are hydraulically controlled seat valves which are universally applicable. The complete modular system covers all sizes.

Proportional Throttle Valve - Series TDA
Proportional Throttle Valve – Series TDA

The proven 2-way proportional throttle valves series TDA feature a precise control of large oil flows for an efficient, reliable operation.

Directional Control Valve - Series D3W
Directional Control Valve – Series D3W

The NG10 direct operated directional control valve series D3W provides high functional limits up to 150 l/min in combination with a low, energy saving pressure drop.

Direct Operated Proportional Directional Control Valve - Series D1FB / D3FB
Direct Operated Proportional Directional Control Valve – Series D1FB / D3FB

Parker’s proven direct operated proportional DC valves series D1FB (NG06) / D3FB (NG10) are universally applicable, provide high repeatability and low hysteresis. The D1FB*EE with explosion proof solenoids allows the usage in hazardous environments.

Pilot Operated Check Valve - Series CPOM
Pilot Operated Check Valve – Series CPOM

Parker’s pilot operated check valves series CPOM in sandwich design ensure an easy configuration of stack systems and provide a very good price-performance ratio.

Pilot Operated Proportional Directional Control Valve - Series D31FB OBE / D41FB OBE / D91FB OBE / D111FB OBE
Pilot Operated Proportional Directional Control Valve – Series D31FB OBE / D41FB OBE / D91FB OBE / D111FB OBE

Parker’s proven standard performance pilot operated proportional DC valves series D*1FB with onboard electronics are universally applicable and feature progressive flow characteristics for sensitive flow rate adjustment.

2 Way Poppet Type Solenoid Valve
2 Way Poppet Type Solenoid Valve

Parker’s 2-way poppet solenoid valves check flow in one direction with very low leakage and free flow opposite; normally-open or normally-closed configurations available. Capable of pressures up to 350 bar (5000 psi) and flows up to 260 lpm (70 gpm).

In-Line General Purpose Check Valve – C Series
In-Line General Purpose Check Valve – C Series

Parker’s C series check valve offers superior construction and high versatility due to its variety of materials, sizes and port styles. It can be used in hydraulic, pneumatic and water applications in both the mobile and industrial markets.

1/2
1/2″ Super Coil

Parker’s broad range of solenoid and proportional cartridge valves are complemented by a wide selection of options in the Super Coil series of IP69K DC and AC coils. Multiple voltage and termination styles are standard cataloged options.

Proportional Throttle Valve with Shut-Off Valve - Series TEA
Proportional Throttle Valve With Shut-Off Valve – Series TEA

With flow rates up to 9500 l/min and fast response times, proportional throttle valves series TEA are predestined for injection molding and die cast applications. The directional valve integrated in the pilot circuit provides the safety function.

Parker 2-way ball valves
Parker 2-Way Ball Valves

2/2-way ball valves interrupt or facilitate the medium flow. These valves, available worldwide, can be optionally equipped with a locking device to avoid unauthorized opening and shut-off; they support the safety of the entire system.

In-Line General Purpose Needle Valve – N Series
In-Line General Purpose Needle Valve – N Series

Parker’s N series valve is a general purpose adjustable needle valve that meters flow in both directions or provide a reliable shut off. This valve can be used in air, water and oil applications and has standard and fine metering options.

Direct Operated Proportional Directional Control Valve - Series D1FB OBE / D3FB OBE
Direct Operated Proportional Directional Control Valve – Series D1FB OBE / D3FB OBE

Parker’s proven direct operated proportional directional control valves series D1FB OBE (NG06) / D3FB OBE (NG10) are universally applicable. The standard performance valves with onboard electronics provide high repeatability and low hysteresis.

Throttle Check Valve - Series FM
Throttle Check Valve – Series FM

Parker double-throttle check valves series FM in sandwich design offer an easy configuration of stack systems and provide a very good price-performance ratio. They are optionally available with a cylindrical needle for fine adjustment in NG06 and NG10.

Pilot Operated Servo Proportional Directional Control Valve - Series D31FP / D41FP / D81FP / D91FP / D111FP
Pilot Operated Servo Proportional Directional Control Valve – Series D31FP / D41FP / D81FP / D91FP / D111FP

Parker’s pilot operated servo proportional directional control valve series D*1FP is the ultimate choice for demanding hydraulic applications. The valves are optionally available with energy-saving regenerative/hybrid function and EtherCAT® interface.

Standard Pilot Assisted Load Control Valves
Standard Pilot Assisted Load Control Valves

Parker’s piloted load control valves are designed to operate independent of downstream pressure to prevent runaway loads under dynamic conditions using a pilot signal, handling pressures up to 420 bar (6000 psi) and flows up to 350 lpm (90 gpm).

Hard Seat In-Line Check Valves (up to 5000 psi) - Compact One Piece Body, Male Fitting Ends - DT Series
Hard Seat In-Line Check Valves (Up To 5000 Psi) – Compact One Piece Body, Male Fitting Ends – DT Series

Parker check valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure.

Pilot Operated Proportional Directional Control Valve - Series D31FB / D41FB / D91FB / D111FB
Pilot Operated Proportional Directional Control Valve – Series D31FB / D41FB / D91FB / D111FB

Parker’s proven standard performance pilot operated proportional DC valves series D*1FB are universally applicable and provide progressive flow characteristics for sensitive flow rate adjustment. Also available as ex-proof version conform to ATEX.

3 Way Spool Type Solenoid Valve
3 Way Spool Type Solenoid Valve

Parker offers five different direct acting 3-way, 2-position spool-type solenoid valves to cover a wide range of flows up to 57 lpm (15 gpm) and pressures as high as 350 bar (5000 psi). Coils are available with multiple voltages and connection types.

Direct Operated Pressure Reducing Valve - Series PRDM
Direct Operated Pressure Reducing Valve – Series PRDM

Parker direct operated pressure reducing valves series PRDM in sandwich design ensure a precise pressure regulation in one area of a hydraulic circuit at a predetermined level below normal system pressure.

2 Way Poppet Type Bi-Directional Solenoid Valve
2 Way Poppet Type Bi-Directional Solenoid Valve

Parker’s 2-way bi-directional poppet solenoid valves block flow both directions with very low leakage and are available in normally-open or normally closed configurations. Capable of pressures up to 350 bar (5000 psi) and flows up to 285 lpm (75 gpm).

Direct Operated Check Valve, SAE Flange - Series C5V
Direct Operated Check Valve, SAE Flange – Series C5V

Parker direct operated check valves series C5V with SAE flange are easy to install and provide high flow rates. They can be mounted either directly on the outlet flange of pumps or on the inlet flange of actuators to achieve a very compact design.

Pilot Operated Relief Valves
Pilot Operated Relief Valves

Parker’s pilot operated relief valves are designed for continuous duty applications featuring great stability with low pressure drop; working with pressures up to 420 bar (6000 psi) and flows up to 400 lpm (106 gpm).

Two-Stage Torque Motor Servovalve – BD Series
Two-Stage Torque Motor Servovalve – BD Series

Parker’s BD series servovalves provide high resolution in the control of position, velocity and force in motion control applications.

E-Module for Proportional Pressure/Flow Control Valves - Series PCD00A-400
E-Module For Proportional Pressure/Flow Control Valves – Series PCD00A-400

Parker digital amplifier modules series PCD00A-400 combine all necessary functions for the optimal operation of two proportional pressure/flow control valves.

5/8
5/8″ Super Coil

Parker’s broad range of solenoid and proportional cartridge valves are complemented by a wide selection of options in the Super Coil series of IP69K DC and AC coils. Multiple voltage and termination styles are standard cataloged options.

Direct Acting Pressure Relief Valve - Series PLC
Direct Acting Pressure Relief Valve – Series PLC

Parkers PLC direct acting pressure relief valve has excellent performance characteristics. PLC is built up as a cartridge and protects the components in a hydraulic system from pressure peaks.

Standard Check Valves
Standard Check Valves

Capable of flows from 3.5 to 303 lpm (0.9 to 80 gpm) and pressure as high as 420 bar (6,000 psi), Parker’s poppet and ball style check valves have a simple and robust design which are used to block flow in one direction, and allow flow in the opposite.

Covers for 2-Way Slip-In Cartridge Valves - Series C*A / C*C
Covers For 2-Way Slip-In Cartridge Valves – Series C*A / C*C

Universally applicable for compact manifold block installation, Parker’s cover without auxiliary functions series C*A and cover for pilot system mounting series C*C are available in many different sizes.

E-Module for Proportional Directional Control Valves - Series PWD00A-400
E-Module For Proportional Directional Control Valves – Series PWD00A-400

Parker digital amplifier modules series PWD00A-400 combine all necessary functions for the optimal operation of proportional directional control valves without position sensor.

Directional Control Valve with Inductive Position Control - Series D1VW
Directional Control Valve With Inductive Position Control – Series D1VW

The NG06 direct operated directional control valve D1VW with inductive position control provides high functional limits up to 80 l/min in combination with a low, energy saving pressure drop. It is typically used in safety relevant applications.

3-Way High-Response Valve - Series TPQ
3-Way High-Response Valve – Series TPQ

Parker’s 3-way high-response cartridge valves series TPQ provide high flow control at maximum dynamics. They are predestined for demanding applications like injection molding and die cast.

In-Line Pressure Compensated Valve - PC*M Series
In-Line Pressure Compensated Valve – PC*M Series

Parker’s PC*M series valves regulates flow at a selected rate within 5% regardless of fluctuations in inlet and outlet flow. This valve can be used with a variety of fluids including water and oil applications.

Posted in InventoryList.