ParkerHydraulicvalve2

Directional Control Valve (8 Watt) - Series D1VW
Directional Control Valve (8 Watt) – Series D1VW

The directional control valve series D1VW 8 Watt is based on the standard D1VW design. The low watt, low current solenoid (< 0.5 A) of this on/off valve allows a direct connection to a PLC.

4 Way 3 Position Spool Type Solenoid Valve
4 Way 3 Position Spool Type Solenoid Valve

Parker has a large selection of direct acting 4-way, 3-position spool-type solenoid valves to cover a wide range of flow requirements up to 57 lpm (15 gpm) and pressures as high as 350 bar (5000 psi); closed, open, float, and tandem centers available.

2-way, 3-way, 4-way High Pressure Ball Valves – BV Series
2-Way, 3-Way, 4-Way High Pressure Ball Valves – BV Series

Parker’s BV series ball valves are a high-quality ball valve that shuts off or allows full flow in either direction.

Pressure Intensifier - Series SD500
Pressure Intensifier – Series SD500

Parker pressure intensifiers series SD500 are particularly suitable for machine tools. They enable a cost-effective system solution especially in clamping applications.

In-Line Precision Needle Valve – MV Series
In-Line Precision Needle Valve – MV Series

Parker’s MV series valves is a high precision adjust needle valve that meters flow in both directions.

3/2 Way Seated Type Directional Control Valve - Series D1SE
3/2 Way Seated Type Directional Control Valve – Series D1SE

The proven seated type directional control valve series D1SE in size NG06 is almost leakage-free and can be used for a wide range of hydraulic applications.

CD AND CS SLIP-IN CARTRIDGE ACCESSORIES
CD AND CS SLIP-IN CARTRIDGE ACCESSORIES
2-Way Flow Control Valve - Series GFG2
2-Way Flow Control Valve – Series GFG2

2-way flow control valves series GFG provide pressure compensated flow for a precise movement control. The valve design largely compensates temperature variations.

Direct Acting Relief Valves
Direct Acting Relief Valves

Parker’s direct acting relief valves are available in several cavity sizes and are designed for continuous duty applications with pressures up to 420 bar (6000 psi) and flows up to 200 lpm (53 gpm).

E-Module for Proportional Directional Control Valves - Series PWDXXA-40*
E-Module For Proportional Directional Control Valves – Series PWDXXA-40*

Parker electronic modules series PWDXXA-40* combine all necessary functions for the optimal operation of proportional directional control valves with position sensor or valves in closed loop systems.

Direct Operated Directional Control Valve - Series D1VL / D3DL
Direct Operated Directional Control Valve – Series D1VL / D3DL

The direct operated directional control valves series D1VL (NG06 / CETOP 03 / NFPA D03) and D3DL (NG10 / CETOP 05 / NFPA D05) with hand lever provide high flow and feature a wide range of spool options.

Pilot Operated Relief Valve - RPL Series
Pilot Operated Relief Valve – RPL Series

Parker’s RPL In-line Relief Valve rated at 60 GPM is designed for limiting the maximum pressure which can be applied to the portion of the hydraulic circuit where it is installed.

Pilot Operated Directional Control Valve - D61VW Series
Pilot Operated Directional Control Valve – D61VW Series

Parker’s D61VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves.

2-Way Slip-In Cartridge Valve - Series C10C*E
2-Way Slip-In Cartridge Valve – Series C10C*E

The 2/2 way seat valves series C10 C*E in cartridge design are equipped with an inductive switch to monitor the closed position. They are preferably used for safety-relevant applications.

Pilot Operated Pressure Reducing Valve - Series ZDR
Pilot Operated Pressure Reducing Valve – Series ZDR

Parker’s pilot operated pressure reducing valves series ZDR in sandwich design provide maximum flow rates up to 120l/min and enable an easy configuration of stack systems.

Pilot Operated Pressure Reducing Valve, Subplate Mounting - Series R4R / R4R*P2
Pilot Operated Pressure Reducing Valve, Subplate Mounting – Series R4R / R4R*P2

Parker subplate mounted pilot operated pressure reducing valves series R4R ensure a constant pressure in the secondary part of the hydraulic system. Series R4R*P2 enables a continuous adjustment by the proportional solenoid operated pilot stage.

Directional Control Valve with Inductive Position Control - Series D3W
Directional Control Valve With Inductive Position Control – Series D3W

The NG10 direct operated directional control valve series D3W with inductive position control provides high functional limits up to 150 l/min in combination with a low, energy saving pressure drop. It is typically used in safety relevant applications.

Selector Valve - S & H Series
Selector Valve – S & H Series

Parker’s S, H, SM, & HM are two position Selector Valves. The S & SM Models are designed for directing an input flow to two different selectable circuits. The H & HM Models are designed for adding float (or freewheeling) functionality to a circuit.

4 Way 2 Position Spool Type Solenoid Valve
4 Way 2 Position Spool Type Solenoid Valve

Parker’s direct acting 4-way, 2-position spool-type solenoids offer a simple electronic solution for actuation or reversing applications; available with flows up to 113 lpm (30 gpm) and pressures as high as 350 bar (5000 psi).

Pressure Switch - Series PSB
Pressure Switch – Series PSB

Electro-hydraulic pressure switches series PSB are robust, long-life high performance devices that provide an electrical signal when sensed pressure rises above or falls below the selected setting. The maximum operating pressure is 315 bar.

Directional Control Valve – Series D1MW / D3MW

Parker’s directional control valves series D1MW (NG06) / D3MW (NG10) are optimally suited for mobile applications due to an excellent surface protection. They provide high flow rates and a wide range of connector versions.

Pilot Operated Pressure Reducing Relieving Valves
Pilot Operated Pressure Reducing Relieving Valves

Parker’s pilot operated acting reducing & relieving valves are used in applications where specific functions require reduced and regulated pressure. Capable of flows up to 150 lpm (40 gpm) and pressures up to 380 bar (5500 psi).

Single Pilot Operated, Pilot to Open Check Valves
Single Pilot Operated, Pilot To Open Check Valves

Parker’s P.O. check valve assemblies allow flow up to 150 lpm (40 gpm) with pressures up to 420 bar (6,000 psi). Return flow can be enable by an external pilot supply, which shifts the internal poppet into an open position.

Needle Flow Control Valves
Needle Flow Control Valves

Parker offers standard needle valves and needle valves with a reverse free-flow check. Parker’s needle valves are non-compensated adjustable orifices capable of flows up to 225 lpm (60 gpm) and pressures as high as 420 bar (6000 psi).

2 Way Spool Type Solenoid Valve
2 Way Spool Type Solenoid Valve

Parker’s selection of direct acting 2-way, 2-position spool-type solenoid valves cover a wide range of flows up to 75 lpm (20 gpm) and pressures as high as 350 bar (5000 psi), with both normally-closed and normally-open options available.

Precision Needle Valve – MVI Series
Precision Needle Valve – MVI Series

Parker’s MVI series is a cartridge-type metering valve that meters flow in both directions.

Spool Type Logic Element
Spool Type Logic Element

Parker’s spool type logic elements can be used for direction and pressure/flow control, and are available normally-open and normally-closed with internal or external pilots for pressures up to 420 bar (6000 psi) and flows up to 500 lpm (132 gpm).

Direct Operated / Hydraulically Pilot Operated Check Valve - Series C4V
Direct Operated / Hydraulically Pilot Operated Check Valve – Series C4V

Parker direct operated and hydraulically pilot operated check valves series C4V are robust and almost universally applicable. They are equipped with a leak-free seat cartridge.

Proportional Directional Control Valve - D1FL/D3FL Series
Proportional Directional Control Valve – D1FL/D3FL Series

Parker’s D*FL series proportional directional control valves are packaged with an integrated microprocessor based open-loop motion profiler.

Standard Bodies
Standard Bodies

Parker’s offering of standard line bodies for each valve and cavity size offered in our catalog. These line bodies feature industry standard cavities.

Pilot Operated Check Valve - Series ZRE
Pilot Operated Check Valve – Series ZRE

Parker’s pilot operated check valves series ZRE are designed for maximum flow rates up to 120 l/min and long lifetime. They ensure a almost leak-free positioning of the actuator.

Direct Operated Check Valve - Series CM
Direct Operated Check Valve – Series CM

Parker direct operated check valves series CM in sandwich design are predestined for an easy configuration of stack systems. A large number of options offer a multitude of uses for hydraulic switching.

Pilot Operated Proportional Directional Control Valve - Series D30FP
Pilot Operated Proportional Directional Control Valve – Series D30FP

With high flow capacity and practically no flow limits, Parker’s pilot operated proportional DC valve series D30FP in size NG10 (CETOP 05) delivers optimized cycle times and exceptional dynamic performance in a small footprint.

5 Way/2 Position Pilot Operated Directional Control Valves
5 Way/2 Position Pilot Operated Directional Control Valves

Parker’s N5 valves are high flow / high pressure 3-way 2-position spool-type pilot-operated cartridge valves that can be used to control direction, pressure, or flow.

2 Way Flow Control Proportional Valves
2 Way Flow Control Proportional Valves

Parker offers an extensive range of 2-way flow control proportional valves through the use of Current Controlled Pulse Width Modulation (PWM) valve drivers with flow capabilities up to 227 lpm (60 gpm) and pressures as high as 210 bar (3000 psi).

Covers for 2-Way Slip-In Cartridge Valves - Series C*B / C*H
Covers For 2-Way Slip-In Cartridge Valves – Series C*B / C*H

Parker’s cover with stroke limiter series C*B and C*H are universally applicable for compact manifold block installation and available in many different sizes.

Proportional Directional Control Valve - D1FW/D3FW Series
Proportional Directional Control Valve – D1FW/D3FW Series

Parker’s D*FW series direct operated proportional directional control solenoid valves are universally applicable and are available in sizes NG6 (CETOP 3) and NG10 (CETOP 5)

Flow Divider/Combiner Valves
Flow Divider/Combiner Valves

Parker offers four different flow divider/combiner valves to cover a wide range of flows up to 320 lpm (85 gpm) and pressures as high as 420 bar (6,000 psi). Standard and custom ratios are available, along with optimized flow range options.

Pilot Operated Proportional Reducing Valve - Series VMY
Pilot Operated Proportional Reducing Valve – Series VMY

Proportional pressure reducing valves series VMY in size NG10 and NG16 allow the variable adjustment of the reduced pressure from 0 bar up to the nominal pressure.

Unloading Relief Valves
Unloading Relief Valves

Parker’s unloading pressure control valves automatically charge and maintain a specific pressure range within accumulators by loading and unloading pump flow. Usable with fixed or variable pumps and pressure of 420 bar (6000 psi) and flow up to 1 gpm.

Posted in InventoryList.