ParkerHydraulicvalve3

Direct Operated Directional Control Valve - Series D1VP / D3DP
Direct Operated Directional Control Valve – Series D1VP / D3DP

The hydraulically operated directional control valves series D1VP (NG06 / CETOP 03 / NFPA D03) and D3DP (NG10 / CETOP 05 / NFPA D05) ensure safe shifting and provide a wide range of spool options.

Direct Acting Differential Area Relief Valves
Direct Acting Differential Area Relief Valves

Parker’s direct acting differential area relief valves are for fast response intermittent applications and work up to 380 bar (5500 psi) and 151 lpm (40 gpm). These valves have lower leakage rates and pressure rise than standard direct acting reliefs.

Pilot Operated Proportional Directional Control Valve - Series D31FC / D41FC / D91FC / D111FC
Pilot Operated Proportional Directional Control Valve – Series D31FC / D41FC / D91FC / D111FC

With a high-definition position feedback system and an excellent price-performance ratio, Parker’s pilot operated proportional directional control valves series D*1FC offer numerous competitive advantages for users – optionally with EtherCAT® interface.

Pilot Operated Check Valves – LO, LOA Series
Pilot Operated Check Valves – LO, LOA Series

Parker’s LO & LOA are Pilot Operated Check Valves that are designed to lock a cylinder, or part of a circuit, without leakage while a control valve is in the neutral position.

Pressure Compensated Flow Control Valves
Pressure Compensated Flow Control Valves

Parker offers a wide range of pressure compensated flow controls for applications that demand constant flow with varying loads and pressures; handling pressures as high as 420 bar (6000 psi) and flows to 56 lpm (15 gpm) in a single common cavity.

Pilot Operated Pressure Reducing Valve - Series PRM
Pilot Operated Pressure Reducing Valve – Series PRM

Parker’s proven pilot operated pressure reducing valves series PRM in sandwich design enable an easy configuration of stack systems. They are available in size NG16 and NG25.

Pressure Relieving Proportional Valve
Pressure Relieving Proportional Valve

Parker’s selection of proportional pressure relieving valves are for applications that require dynamic relieving and valves that are capable of flows up to 95 lpm (25 gpm) and pressures as high as 350 bar (5000 psi).

Pilot Operated Pressure Reducing Valves
Pilot Operated Pressure Reducing Valves

Parker’s pilot operated pressure reducing valves are capable of flows up to 150 lpm (40 gpm) and regulating pressures up to 350 bar (5000 psi) and are commonly used for setting the pressure of a sub-circuit within a hydraulic system.

Pilot Operated Pressure Relief Valves - Series R / RS*E
Pilot Operated Pressure Relief Valves – Series R / RS*E

The pilot operated pressure relief valves series R and RS*E are particularly suitable for the protection of the pump. These valves in slip-in cartridge design are offered as complete units and available in numerous variations.

Throttle Check Valve - Series ZRD
Throttle Check Valve – Series ZRD

Parker’s throttle check valves series ZRD in sandwich design feature maximum flow rates up to 160l/min and enable an easy configuration of stack systems.

Insert Check Valves
Insert Check Valves

Parker’s ball and poppet style check valves are cartridges designed to be inserted inside manifolds and can handle flow up to 500 lpm (132 gpm) and pressures at 420 bar (6,000 psi) for circuit optimization and space savings.

Pressure Reducing Proportional Valves
Pressure Reducing Proportional Valves

Parker’s selection of proportional pressure reducing valves are for pressure sensitive applications and are capable of flows up to 37 lpm (10 gpm) and pressures as high as 210 bar (3000 psi).

Pilot Operated Proportional Pressure Reducing Valve - Series PRPM
Pilot Operated Proportional Pressure Reducing Valve – Series PRPM

Proportional pressure reducing valves series PRPM are particularly suitable for machine tools. They provide optimum performance in combination with a digital amplifier module PCD00A.

Direct Acting Cross-Over Relief Valves
Direct Acting Cross-Over Relief Valves

Cross-Over Relief cartridge valves provide pressure protection to hydraulic motors, cylinders and rotary actuators up to 120 lpm (32 gpm) and 350 bar (5000 psi). Available in single or dual cartridge, in-line, manifold, or motor mount configurations.

Direct Operated Proportional Directional Control Valve - Series D1FC / D3FC
Direct Operated Proportional Directional Control Valve – Series D1FC / D3FC

Representing cutting-edge technology, Parker’s new compact D1FC (NG06) / D3FC (NG10) provide optimized process speed with high dynamics and flow for various applications. Optionally with EtherCAT® interface for high data speed and short cycle times.

Pressure Compensated Priority Flow Control Valves
Pressure Compensated Priority Flow Control Valves

Pressure compensated priority flow control valves maintain constant flow regardless of changes to inlet pressure for flows up to 90 lpm (24 gpm) and pressures up to 420 bar (6000 psi); excess flow is diverted once the priority flow requirement is met.

Check Valve - Series SPZBE
Check Valve – Series SPZBE

Parker check valves series SPZBE in size NG16, NG25 and NG32 are proven slip-in cartridge valves. Key advantage of this robust valve: the little space which is required for installation.

2-Way Slip-In Cartridge Valve - Series SVLA
2-Way Slip-In Cartridge Valve – Series SVLA

The hydraulically pilot operated check valve for subplate mounting series SVLA in size NG06 is proven part of the wide Parker pilot control range for DIN cartridge valves.

Standard Pilot Vented Load Control Valves
Standard Pilot Vented Load Control Valves

Parker’s vented load control valves are designed to operate independent of downstream pressure to prevent runaway loads under all dynamic conditions, handling pressures up to 350 bar (5000 psi) and flows up to 113 lpm (30 gpm).

Threaded Check Valves - Series RK, RB
Threaded Check Valves – Series RK, RB

The screwable check valves series RK and RB are designed to go into simple, threaded cavities. They block the flow in one direction and open in the opposite direction.

1″ DS Coil

Parker’s 1 inch DS Coil is a high power coil often used with 12, 16, and 20 size proportional or on-off solenoid cartridges. Multiple voltage and termination styles are standard cataloged options.

Direct Acting Pressure Reducing Relieving Valves
Direct Acting Pressure Reducing Relieving Valves

Parker’s direct acting reducing & relieving valves are used in intermittent duty applications where specific functions require reduced and regulated pressure. Capable of flows up to 56 lpm (13 gpm) and pressures up to 420 bar (6000 psi).

Control Fluid Temperature in Hydrostatic Drive Circuits, Hydraulic Thermal Bypass Valves, 250 psi - TH Series
Control Fluid Temperature In Hydrostatic Drive Circuits, Hydraulic Thermal Bypass Valves, 250 Psi – TH Series

Parker’s thermal bypass valves modulate fluid temperature by shifting return line flow through the cooler, or bypassing it directly to the reservoir.

Subplates for Directional Control Valves - Series SPD
Subplates For Directional Control Valves – Series SPD

Subplates series SPD are used for directional control valves with BSPP threads. They are available in different versions from size NG06/CETOP 03 to NG25/CETOP 08.

Proportional Pressure Reducing Valve with Onboard Electronics - Series D1FV OBE
Proportional Pressure Reducing Valve With Onboard Electronics – Series D1FV OBE

The durable proportional pressure reducing valve D1FV OBE in NG06 (CETOP 03) features a very good pressure control behaviour. The digital onboard electronics is situated in a robust metal housing and provides a wide range of available commands.

Fuel Line Check Valves - Low Pressure (250 psi), Full Flow Swing Valve, Lightweight Aluminum - 2600 Series
Fuel Line Check Valves – Low Pressure (250 Psi), Full Flow Swing Valve, Lightweight Aluminum – 2600 Series

Parker’s swing type check valves are designed to protect low pressure air, liquid, or gas systems from fluid back pressure.

2-Way Slip-In Cartridge Valve - Series ZUDB
2-Way Slip-In Cartridge Valve – Series ZUDB

As a part of Parker’s comprehensive modular DIN cartridge system, the sandwich valve with pressure relief function series ZUDB provides maximum flexibility in building pressure functions.

Cartridge Style Dual Pilot Operated Check Valves
Cartridge Style Dual Pilot Operated Check Valves

Designed to lock hydraulic circuits or actuators in rest conditions, Parker’s dual pilot operated check valves allow bidirectional flow ranging up to 19 lpm (5 gpm) and pressure up to 207 bar (3,000 psi) after pilot pressure is supplied.

2-Way Slip-In Cartridge Valve - Series ZSRA/ ZSRB
2-Way Slip-In Cartridge Valve – Series ZSRA/ ZSRB

The shuttle valves for sandwich plate mounting series ZSRA and ZSRB in size NG06 are part of the wide Parker pilot control range for DIN cartridge valves.

Flow Control Valve, Subplate Mounted - PC*MS Series
Flow Control Valve, Subplate Mounted – PC*MS Series

Parker’s PM*CS series valves are designed to regulate flow at a selected rate.

3 Way Flow Control Proportional Valves
3 Way Flow Control Proportional Valves

Parker selection of normally-closed 3-way flow control proportional valves used with Current Controlled Pulse Width Modulation (PWM) valve drivers have flow capabilities up to 75 lpm (20 gpm) and pressures as high as 210 bar (3000 psi).

2-Way High-Response Valve with Shut-Off Valve - Series TEP
2-Way High-Response Valve With Shut-Off Valve – Series TEP

2-way high-response valves series TEP in cartridge design base on the TDP range and provide a precise control of high flows at maximum dynamics. Additionally, TEP valves are equipped with a direction control valve for shutting off the pilot system.

Proportional Throttle Valve - Series F5C
Proportional Throttle Valve – Series F5C

Proportional throttle valves series F5C with SAE61 flange allow to adjust the flow in proportion to the input signal.

Direct Operated Directional Control Valve - Series D4P / D9P / D11P
Direct Operated Directional Control Valve – Series D4P / D9P / D11P

The hydraulically operated directional control valves series D4P (NG16 / CETOP 07), D9P (NG25 / CETOP 08) and D11P (NG32 / CETOP 10) ensure safe shifting and provide a wide range of spool options.

Counterbalance Valve - Series ZNS
Counterbalance Valve – Series ZNS

The proven counterbalance valve series ZNS in size NG06 (CETOP 03) and NG10 (CETOP 05) enables a reliable operation by controlling the actuator movement at overrunning loads.

Air Operated Directional Control Valve - D3A Series
Air Operated Directional Control Valve – D3A Series

Parker’s D3A directional control valves are high performance, 4-chamber, direct operated, air pilot controlled, 4-way valves.

Direct Acting Crossover Relief - DXV Series
Direct Acting Crossover Relief – DXV Series

Parker’s DXV Crossover Relief Valve is a fast, direct acting design that provides pressure overload protection for an actuator where the relieved flow is 10 GPM or less.

Lever Operated Directional Control Valve - D3L, D3LB Series
Lever Operated Directional Control Valve – D3L, D3LB Series

Parker’s D3L directional control valves are high performance, 5-chamber, direct operated, lever controlled, 4-way valves.

Cartpak Bodies
Cartpak Bodies

Parker’s Cartpak sandwich mounted bodies are designed to be mounted under a standard ISO 4401-03, NFPA D03, CETOP 3 size valve, and provide a multitude of valve functionality.

2 Way Pilot Operated Directional Control Valves
2 Way Pilot Operated Directional Control Valves

A pilot-operated, cartridge style screw-in hydraulic directional valve used in two way circuits with remote pilot actuation. Available in both normally-open and normally-closed orientation.

Posted in InventoryList.