Parker’s P.O. check valve’s allow flows up to 226 lpm (60 gpm) and pressure up to 350 bar (5,000 psi). Return flow can be enable by an external pilot supply, which shifts the internal poppet into an open position.
Direct operated 3-way pressure compensators series R5P with SAE flange can be combined with fixed or adjustable flow resistors (throttles) to provide a load compensated flow.
Parker’s pilot operated sequence valve with a built-in reverse check combines two functions into a single cartridge reducing space, components, and manifold complexity. Capable of flows up to 70 lpm (32 gpm) and pressures up to 420 bar (6000 psi).
Parker’s CP series valve allows free flow in one direction and flow in the counter direction is blocked until pilot pressure unseats the poppet and permits flow in the opposite direction.
The pilot valves with preload function series DSBA100 in NG06 are part of the wide Parker pilot control range for DIN cartridge valves. They are available in two versions for subplate mounting or sandwich plate mounting.
Parker check valves designed for “reverse” flow from the side port (port 2) to the end port (port 1) from 19 to 500 lpm (5 to 132 gpm) and pressures up to 420 bar (6,000 psi), allowing manifold space optimization while achieving superior performance.
Parker’s D31*L directional control valves are 5-chamber, pilot operated, lever controlled valves.
The pilot valves with pressure relief function series R06M for subplate mounting and RS06M for sandwich plate mounting in size NG06 are part of the wide Parker pilot control range for DIN cartridge valves.
Parker’s direct operated check valves series ZRV in size NG06 (CETOP 03) and NG10 (CETOP 05) are equipped with a cartridge type insert to ensure zero leakage and high lifetime.
Parker’s CFDA Adjustable Flow Divider is designed for providing a 0-15 GPM controlled flow source. It is typically applied for applications where frequent adjustments to the controlled flow rate are required.
Parker’s 3-position, 4-way manual spool valves are spring centered shift by pushing and pulling with available detents and are capable of flows up to 19 lpm (5 gpm) and pressures as high as 350 bar (5000 psi).
Parker check valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure.
Parker’s GF series valves isolate gages from damage and inaccurate readings caused by line pressure surges and hydraulic hammer.
Sandwich plates series CS06 for NG06 / CETOP 03 offer a wide variety of applications, e.g. for vertical stackings. Cover plates series CS06 for NG06 / CETOP 03 may be used to connect porting patterns.
Parker’s priority pressure compensators provide constant flow regardless pressure changes via a fixed or adjustable orifice with priority to one outlet port. These valves can handle flows up to 95 lpm (25 gpm) and pressures up to 380 bar (5500 psi).
Parker’s solenoid operated unloading relief valves are a combination of a solenoid unloader and system relief in a single valve and cavity; capable of flows up to 60 lpm (16 gpm) and pressures to 280 bar (4000 psi).
The check valve series C1DB is a ready-for-use cartridge valve using proven components of Parker’s modular DIN cartridge system. It provides a wide range of options and is particularly suitable for a compact manifold block installation.
Direct operated 2-way pressure compensators series R5A with SAE flange can be combined with fixed or adjustable flow resistors (throttles) to provide a load compensated flow.
Parker’s family of 2-way proportional poppet valves are available in normally-open or normally-closed configurations and are capable of flows up to 117 lpm (31 gpm) and pressures as high as 210 bar (3000 psi).
The test unit EX-M05 ValveMaster® is particularly suitable for testing and commissioning of Parker proportional and servo proportional valves with onboard electronics.
Parker’s 3-position, 3-way spool type open center shuttle valves are available in two cavity sizes and are pilot controlled. These shuttle valves are capable of flows up to 100 lpm (26 gpm) and 420 bar (6000 psi).
Parker’s 2-position, 3-way spool type shuttle valve with spring offset are purposefully spring biased into its normal position and are designed to fit an industry common cavity and are capable of flows up to 90 lpm (24 gpm) and 420 bar (6000 psi).
Parker’s 3-position, 3-way open center spool type inverse shuttle valves are available in two cavity sizes and are pilot controlled with integrated reverse checks. These shuttle valves are capable of flows up to 100 lpm (26 gpm) and 420 bar (6000 psi).
Parker sandwich plates series H10 allow energy saving circuits for differential cylinders in combination with various directional control and proportional DC valves in size NG10 / CETOP 05.
Parker’s pilot operated relief valves are designed for continuous duty applications and features a spool type pilot operated valve with an integrated reverse flow check; working with pressures up to 420 bar (6000 psi) and flows up to 350 lpm (92 gpm).
Parker check valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure.
Parker’s 2-position, 3-way manual spool valves are pull to shift with an available detent option and are capable of flows up to 19 lpm (5 gpm) and pressures as high as 350 bar (5000 psi).
Parker’s kick-down pilot operated spool type sequence valve is a hydraulic fuse used to unload flow once the pressure setting is reached, resetting when less than 45 psi. Capable of flows up to 160 lpm (42 gpm) and pressures up to 420 bar (6000 psi).
Parker’s 2-position, 2-way normally-open manual poppet valves are push-to-close with an available detent option and are capable of flows up to 45 lpm (12 gpm) and pressures as high as 350 bar (5000 psi).
Parker’s SE31 series valve is a two stage, 4-way, flapper and nozzle style servovalve and is designed to fit onto DIN NG10 or NFPA D05 port patterns.
Parker pilot operated sequence valves series R5S enable a hydraulic system to operate in a pressure sequence. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps to achieve a very compact design.
Parker’s SE60 series valve is a two stage, 4-way, flapper and nozzle style servovalve.
Parker’s pressure compensator valves provide constant flow regardless of upstream or downstream pressure changes via a fixed or adjustable orifice. These valves can handle flows up to 150 lpm (40 gpm) and pressures up to 245 bar (3500 psi).
Parker’s 2-position, 3-way spool type shuttle valves will fit industry common cavities while providing superior performance; capable of flows up to 90 lpm (24 gpm) and 420 bar (6000 psi).
Parker’s D61VL directional control valves are 5-chamber, lever operated valves.
Parker’s D8P directional control valves are 5-chamber, pilot operated valves.
Parker’s custom bodies to be used specifically with Parker’s MHC-010 and MHC-022 counterbalance cartridge valves.
Pilot-to-close check valves operate as standard check valves, but block flow completely when a pilot signal is supplied; capable of flows up to 38 lpm (10 gpm) and pressures up to 240 bar (3,500 psi).
Subplates series A are used for directional control valves with metric threads. They are available in size NG06/CETOP 03 and NG10/CETOP 05.
The pilot valve for pressure sequence function series S06M in size NG06 is a proven component of the wide Parker pilot control range for DIN cartridge valves.