Parker’s CB series counterbalance valve controls the actuator movement with overrunning loads.
Parker’s kick-down pilot operated sequence valve is a hydraulic fuse used to unload flow once the pressure setting is reached, resetting when all flow is removed. Capable of flows up to 160 lpm (42 gpm) and pressures up to 420 bar (6000 psi).
The solid subplate series A102 in size NG10 is used for mounting the proven Parker pressure valves series VB and VM.
Parker’s D101VL directional control valves are 5-chamber, lever operated valves.
Parker’s D31*A directional control valves are 5-chamber, air pilot operated valves.
Manifold Mounted Motor Control Valve capable of pressures up to 210 bar (3000 psi) and flows up to 56 lpm (15 gpm). Designed to direct mount on TB, TE, TF, and TG series Parker Low Speed, High Torque motors.
Parker’s PR series pilot operated pressure reducing/relieving valves are used to regulate pressure in one area of a circuit at a set pressure below the normal system pressure.
Parker’s D6P directional control valves are 5-chamber, pilot operated valves.
Parker’s D81VL directional control valves are 5-chamber, lever operated valves
Parker’s D61VA directional control valves are 5-chamber, air pilot operated valves
Parker’s CP series pilot operated check valves are designed for maximum flow rates.
Parker’s RG series valve is a full time regenerative valve assembly.
Parker’s 2-position, 4-way manual spool valves are push to shift with an available detent option and are capable of flows up to 15 lpm (4 gpm) and pressures as high as 350 bar (5000 psi).
Parker’s family of 2-way proportional poppet valves are available normally-open or normally-closed with a standard integrated pressure compensator; capable of flows up to 83 lpm (22 gpm) and pressures as high as 210 bar (3000 psi).
Parker’s FC, FD series throttle check valves are designed for maximum flow rates.
Parker’s CH series check valves provide free flow in one direction and blocked flow in the reverse direction.
Parkers RV series direct acting, pressure relief valves are designed to limit pressure in various parts of a hydraulic circuit.
Parker’s SE2E series valves feature electronic spool position feedback and on-board electronics.
Parker pilot operated check valves series C5P with SAE flange are easy to install and provide high flow rates. They can be mounted directly on the flanges of actuators to achieve a very compact design.
The regenerative and hybrid direct operated directional control valves series D3DWR in NG10 allow energy saving circuits with differential cylinders.
Parker’s D101VA directional control valves are 5-chamber, air pilot operated valves
Parker’s D81VA directional control valves are 5-chamber, air pilot operated valves.
Parker’s Series D10P directional control valves are 5-chamber, pilot operated valves.
Parker’s D81VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves.
Parker’s D31 directional control valves are 5-chamber, pilot operated, solenoid controlled valves.
Parker Conflow’s Code 4810 is a low volume, pressure control reducing valve which allows outlet pressure to be set, regardless of inward pressure.
Parker Conflow’s Code 44 is a reliable, adjustable reducing valve that provides a pre-determined outlet pressure irrespective of variation of inlet pressure for dust suppression in underground mines.
The Code 61 is a compact, in-line ratio reducing valve which reduces downstream fluid pressure to create safe and appropriate pressure for equipment to operate.
Parker’s D*FL series proportional directional control valves are packaged with an integrated microprocessor based open-loop motion profiler.
The pilot operated pressure relief valves series DSDU in cartridge design are mostly used for accumulator pressure relief.
Parker F130LS is a robust mobile valve with excellent controllability for single or sequenced used functions. Parker F130LS is a sectional-built, directional control valve for mobile machinery used in load sensing systems.
H170CF is mobile directional control valve of the monoblock type with an open centre. The valve blocks can be flanged together to form a valve package for either single or multi-pump operation.
Parker M250LS mobile valve is characterized by industry leading properties regarding robustness, control precision and energy efficiency.Parker M250LS is a monoblock valve designed for mobile machinery used in load sensing systems.
Parker P70LS is a robust mobile valve with excellent controllability for single or sequenced used functions. Parker P70LS is a sectional-built, directional control valve for mobile machinery used in load sensing systems.
Parker M402LS mobile valve is characterized by industry leading properties regarding robustness, control precision and energy efficiency.Parker M402LS is a monoblock valve designed for mobile machinery used in load sensing systems.
Parker’s V10 Series valve is a sectional, open center, CF (constant flow), directional control valve for mobile equipment. It is typically applied between 5 and 15 GPM pump flow at 3500 psi.
Parker’s V20 Series valve is a sectional, open center, CF (constant flow), or closed center load sensing (variable flow) directional control valve for mobile equipment. It is typically applied between 15 and 25 GPM pump flow at 3500 psi.
Parker’s VA20/VG20 is a sectional, open center, CF (constant flow), directional control valve for mobile machines. It is typically applied between 20 and 45 GPM pump flow.
Parker’s VA35/VG35 is a sectional, open center, CF (constant flow), directional control valve for mobile machines. It is typically applied between 20 and 45 GPM pump flow.