Parker’s V20EH is a sectional, open center, CF (constant flow), directional control valve for mobile machines. It is Electro-Hydraulic actuated and can be applied up to 25 GPM
Parker’s VG35EH valve is a sectional, open center, CF (constant flow), directional control valve for mobile machines. It is Electro-Hydraulic actuated and typically applied between 30 and 65 GPM pump flow.
Parker F130CF, F130CP is a robust mobile valve with excellent controllability for mobile machinery. Parker F130CF, F130CP is a sectional-built, directional control valve for mobile machinery used in open center systems and closed center systems.
Parker P70CF, P70CP is a robust valve with excellent controllability for mobile machinery.Parker P70CF, P70CP is a sectional-built, directional control valve for mobile machinery used in open center systems and closed center systems.
Parker L90LS mobile valve is characterized by industry leading properties regarding robustness, control precision and energy efficiency. Parker L90LS is a sectional-built, load sensing, directional control valve for mobile machinery.
Parker’s K220LS mobile valve is characterized by industry leading properties regarding robustness, control precision and energy efficiency.Parker K220LS is a sectional-built, load sensing, directional control valve for mobile machinery.
P70CP is a sectional, constant pressure, mobile directional control valve for mobile machines.
Parker’s VP120 series is a sectional, pressure compensated load sensing directional control valve for mobile machines.
Parker’s VP/VPO series valve is a stackable, multi-section, load-sensing, pressure-compensated directional valve for mobile equipment.
Parker’s VPL Series is a stackable, multi-section, load-sensing, pressure-compensated directional valve for mobile equipment. Work Port flows rated to 30 GPM at 5000 PSI.
Parker’s VP170 series is a sectional, pressure compensated load sensing directional control valve for mobile machines.
Parker’s PC55 series valve is a sectional, pressure compensated load sensing directional control valve for mobile machines.
The PRS6 is a 3-way pressure reducing valve
The QDS6 sequence valve is designed to open or close a hydraulic pilot signal when it reaches a predetermind pressure level.
The VV6 valve consists of a housing, a poppet and two valve seats. It has two inlets and one outlet.
The HLC coil series is for use on Parker solenoid cartridge assemblies in potentially hazardous environments.
VP04 is a stackable pneumatic control-pressure valve intended for proportional pneumatic remote control of directional valves.
Parker adaptor plates series A10 allow energy saving circuits for differential cylinders in combination with various directional control and proportional DC valves in size NG10 / CETOP 05.
The new Parker 2-way high performance proportional throttle valves series TDC are characterized by a precise control of high flows at high dynamics. Typical applications for TDC slip-in cartridge valves are injection molding and hydraulic presses.
Parker’s NS series needle valve provides excellent speed control and shutoff for hydraulic applications where a free reverse-flow check is not needed.
Parker FLV95 mobile valve is characterized by industry leading properties regarding robustness, control precision and energy efficiency.Parker FLV95 is a sectional-built valve designed for forklift used in fixed displacement pump systems.
Parker KM300 mobile valve is characterized by industry leading properties regarding robustness, control precision and energy efficiency.Parker KM300 is a monoblock valve designed for wheel loader and other mobile machinery used in open center systems.
Parker double-throttle check valves series FM in sandwich design offer an easy configuration of stack systems and provide a very good price-performance ratio. They are optionally available with a cylindrical needle for fine adjustment in NG06 and NG10.
Parker direct operated check valves series CM in sandwich design are predestined for an easy configuration of stack systems. A large number of options offer a multitude of uses for hydraulic switching.
Parker’s pilot operated check valves series CPOM in sandwich design ensure an easy configuration of stack systems and provide a very good price-performance ratio.
The D1VW in NG06 (CETOP 03) is an on/off valve which provides high functional limits in combination with a very low, energy-saving pressure drop. It is optionally available with soft shift option
The NG10 direct operated directional control valve series D3W provides high functional limits up to 150 l/min in combination with a low, energy saving pressure drop.
Parker direct operated pressure reducing valves series PRDM in sandwich design ensure a precise pressure regulation in one area of a hydraulic circuit at a predetermined level below normal system pressure.
Parker’s proven pilot operated pressure reducing valves series PRM in sandwich design enable an easy configuration of stack systems. They are available in size NG10.
Setting standards for pilot operated on-/off valves in terms of functional limits and pressure drop, Parker’s series D31DW, D31NW, D*1VW are suitable for practically any industrial application.
The pilot operated pressure relief valves from the Parker Manapak series RM are in sandwich design for easy configuration of stack systems. They are available in size NG10.
Pressure relief valves series RDM are direct operated piston type valves with low hysteresis. They can be used as P-T relief or as T-T controlled counter balance valve. They are available in NG06 and NG10.
The pilot operated pressure relief valves series SCRM are in sandwich design for easy configuration of stack systems. They are available in size NG06.
Parker’s proven pilot operated pressure reducing valves series PRM in sandwich design enable an easy configuration of stack systems. They are available in size NG06.